Upscale Automotive

Megan Racing Euro Street Series Coilovers Damper Kit for 09+ Audi A4/A5/S4/S5 FWD/AWD

The Euro Street Series is our new Luxury Package based off of our Street-Series coil-over line-up using similar specifications and design, but offering a more conservative spring and damper setup for a more comfortable ride, yet still providing a sporty feel and control.

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION: Audi A4/A5/S4/S5 FWD/AWD 2009+

SPRING RATES:
F: 62mm ID; 200mm length; 12 kg/mm
R: 62mm ID; 210mm length; 5 kg/mm

DAMPER SPECS:
F: 110mm stroke; 200mm length; PVER-02 valving code
R: 177mm stroke; 280mm length; 44R03 valving code

- 32 Levels of Damper Force Adjustment

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1-year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing Street Series Coilovers Damper Kit for 08+ Scion xB

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION:
Scion xB 2008+

SPRING RATES:
F: 62mm ID; 180mm length; 5 kg/mm
R: 62mm ID; 180mm length; 4 kg/mm

DAMPER SPECS:
F: 130mm stroke; 280mm length; M2 valving code
R: 175mm stroke; 300mm length; 44R03 valving code

- 32 Levels of Damper Force Adjustment

- Pillow Ball Upper Mounts w/ Front Adjustable Camber Plates

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing Street Series Coilovers Damper Kit for 10+ Toyota Prius

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION:
Toyota Prius 2010+

SPRING RATES:
F: 62mm ID; 220mm length; 4 kg/mm
R: 62mm ID; 230mm length; 3.8 kg/mm

DAMPER SPECS:
F: 150mm stroke; 300mm length; M1 valving code
R: 175mm stroke; 260mm length; A13 valving code

- 32 Levels of Damper Force Adjustment

- Pillow-Ball Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Mono-Tube Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing Street Series Coilovers Damper Kit for 08-09 Pontiac G8

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 Levels of damper force adjustment, full-height adjustment, these damper kits are then perfectly matched with front and rear Pillow Ball upper mounts for camber correction in most applications.

The adjustment of the damper is as simple as can be with a built-in knob at the top of the damper mount for easy access. Simple adjustments can be made to tune to your style of driving and comfort level desired. Single-Adjustable dampers make suspension adjustments easy to tune whether you¡¯re a professional mechanic or an automotive enthusiast with amateur mechanical skills.

The height adjustment is made easy with CNC-Machined locking perches for accuracy and smooth adjustment. You can raise your car up to factory height for OEM appearance with performance handling or you can drop your car all the way down for a formal racetrack and an aggressive stance lowering your center of gravity to gain full potential of your car¡¯s handling capabilities.

On most applications, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mounts to easily tune and adjust your camber. Adjustable camber gives you an edge on most suspension setups, as you can easily tune your car for any ride height which improves handling, predictability and furthermore tire wear, which is a great benefit both on the racetrack and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION:
Pontiac G8 2008-09

SPRING RATES:
F: 62mm ID; 180mm length; 7 kg/mm
R: 62mm ID; 170mm length; 12kg/mm

DAMPER SPECS:
F: 130mm stroke; 300mm length; M2 valving code
R: 110mm stroke; 230mm length; PVER-02 valving code

- 32 Levels of Damper Force Adjustment

- Re-uses OEM Front & Rear Rubber Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing V2 Street LP Series Coilovers Damper Kit w/Spindles for 97-01 Infiniti Q45

The Street LP Series is our new Luxury Package, using similar specs & set up design as Street Series, ( not too aggressive) offering spring rates for a more comfortable ride, but still giving you the sporty feel & control.

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 Levels of damper force adjustment, full-height adjustment, these damper kits are then perfectly matched with front and rear Pillow Ball upper mounts for camber correction in most applications.

The adjustment of the damper is as simple as can be with a built-in knob at the top of the damper mount for easy access. Simple adjustments can be made to tune to your style of driving and comfort level desired. Single-Adjustable dampers make suspension adjustments easy to tune whether you¡¯re a professional mechanic or an automotive enthusiast with amateur mechanical skills.

The height adjustment is made easy with CNC-Machined locking perches for accuracy and smooth adjustment. You can raise your car up to factory height for OEM appearance with performance handling or you can drop your car all the way down for a formal racetrack and an aggressive stance lowering your center of gravity to gain full potential of your car¡¯s handling capabilities.

On most applications, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mounts to easily tune and adjust your camber. Adjustable camber gives you an edge on most suspension setups, as you can easily tune your car for any ride height which improves handling, predictability and furthermore tire wear, which is a great benefit both on the racetrack and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION: Infiniti Q45 1997-2001

SPRING RATES:
F: 62mm ID; 180mm length; 8 kg/mm
R: 62mm ID; 220mm length; 7 kg/mm

DAMPER SPECS:
F: 120mm stroke; 280mm length; MF1 valving code
R: 135mm stroke; 240mm length; A1 valving code

- 32 Levels of Adjustable Damper Strength

- Pillow Ball Upper Mounts

- Front Upper Camber Plates

- Rubber Dust Covers

- Adjustable Ride Height

- Aggressive Spring Rates

- Mono-Tube Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coilover damper kits come with 1 year manufacture-defect warranty.

- All Hardware is Included

NOTE: If the vehicle is equipped with Air-Ride system, installing the suspension might turn the Stability control on. THIS WILL NOT AFFECT YOUR RIDE QUALITY.

Megan Racing Street Series Coilovers Damper Kit for 10+ Kia Forte

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION:
Kia Forte 2010+

SPRING RATES:
F: 62mm ID; 180mm length; 6 kg/mm
R: 62mm ID; 170mm length; 4 kg/mm

DAMPER SPECS:
F: 120mm stroke; 260mm length; M2 valving code
R: 87mm stroke; 160mm length; 44R-01 valving code

- 32 Levels of Damper Force Adjustment

- Front Upper Camber Plates

- Pillow-Ball Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Mono-Tube Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing Street Series Coilovers Damper Kit for 11+ Hyundai Genesis Coupe

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION:
Hyundai Genesis Coupe 2011+

(Post-Sept. 2010 models have revisions to the endlinks mounting points and/or lower brackets, please verify your model before purchase)

SPRING RATES:
F: 62mm ID; 170mm length; 7 kg/mm
R: 62mm ID; 185mm length; 8 kg/mm

DAMPER SPECS:
F: 120mm stroke; 260mm length; M2 valving code
R: 137mm stroke; 44-210mm length; 44R01 valving code

- 32 Levels of Damper Force Adjustment

- Front Upper Camber Plates

- Pillow-Ball Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

NOTE: Shorter end-links are included for MY11 to account for sway bar positioning at lower vehicle ride heights. Ride height at default settings are approximately 2.5" lower than stock. Remember to match shock length after setting rear end ride height according to rear spring.

Megan Racing 2.5" OE-RS Catback Exhaust System for 08+ Honda Accord 4cyl 2dr Coupe

Megan Racing OE-RS series cat backs are based on factory style, with bigger piping, OEM style polished mufflers and quiet sound. The cat back system is made stainless steel. All piping are mandrel bent with a high polished finish. Exhaust system comes with all the necessary hardware needed for a direct bolt on installation. Improves HP with minimal noise.

Being constructed of T-304 Stainless Steel this durable piece will easily handle the elements and offer you years of performance. Backed with our one-year manufacturers warranty, you will rest assured with your sound investment

SPECIFICATIONS & FEATURES:

- 4" tips with silencers

- 2.5" piping

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents: http://www.meganracing.com/tech/faqs.asp?id=67&subject=Are%20Megan%20Racing%20exhaust%20products%20street-legal?

Megan Racing Seat Brackets for Nissan 350Z

For use with Megan Racing reclinable seats. Made of durable Steel-Alloy for safety and durability, these units are sold in a pair for LHD USDM Nissan 350Z chassis.

Application:
Nissan 350Z (USDM ONLY!!!)

Torque Solution Shifter Base Bushing Kit for 95-99 Mitsubishi Eclipse

Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points. This yields improved shifting feel and characteristics for years of enjoyment.

• Cnc machined 6061-T6 billet aluminum
• Installs in under 30 minutes
• Black anodized
• Life Time Warranty
• Made in USA

Torque Solution Rear Differential Mount Bushings for 10+ Chevrolet Camaro

All Torque Solution rear differential mounts are made with both quality and performance in mind. OEM mounts are made of sub-par material with rubber bushings that are infamous for deteriorating, cracking, and tearing over time. Heavy racing or spirited driving tends to speed up that process. Torque Solution has you covered! Our pins are made out of high grade 6061 billet aluminum material for weight savings and polyurethane bushings for long life and consistent performance.

By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 7sec e.t. torture tested
•Black anodized

•85A durometer bushings ( Not Solid )
•LifeTime Warranty
•Made in USA

Mishimoto Silicone Intake Boot for 92-99 BMW E36 (325/328/M3)

The Mishimoto BMW E36 (325/328/M3) Silicone Intake Boot is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto HFM Silicone Intake Boot for 92-99 BMW E36 (325/328/M3) w/ 3.5"

The Mishimoto BMW E36 (325/328/M3) with 3.5" HFM Silicone Intake Boot is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Megan Racing Short Shifter for 00-03 Mitsubishi Eclipse / Evo VIII

The Short Shifter is made with high strength billet steel and nickel plated for ultra low friction and corrosion resistance. The throw is reduced up to 40%, and shift knob height is reduced by 1 to 3 inches depending on the model. These shifters provide a more precise shift and allows for quicker shifting without drastically changing the overall driving experience. They have been designed specifically for the more aggressive tuner who demands the most extreme shifter in terms of both looks and performance.

Spec:

- Fits 00-03 Eclipse & 02+ Lancer EVO 8

- Reduce at least 1" from the height of the stock shifter.

- Easy installation, reduce shift throw distance

- Each shifter comes with one year limited warranty.

Megan Racing Short Shifter for 97-01 Mitsubishi Mirage 5-spd

The Short Shifter is made with high strength billet steel and nickel plated for ultra low friction and corrosion resistance. The throw is reduced up to 40%, and shift knob height is reduced by 1 to 3 inches depending on the model. These shifters provide a more precise shift and allows for quicker shifting without drastically changing the overall driving experience. They have been designed specifically for the more aggressive tuner who demands the most extreme shifter in terms of both looks and performance.

Spec:

- Fits 97-01 Mirage 5-speed

- Easy installation, reduce shift throw distance

- Each shifter comes with one year limited warranty.

Megan Racing Short Shifter for 90-01 Acura Integra

The Short Shifter is made with high strength billet steel and nickel plated for ultra low friction and corrosion resistance. The throw is reduced up to 40%, and shift knob height is reduced by 1 to 3 inches depending on the model. These shifters provide a more precise shift and allows for quicker shifting without drastically changing the overall driving experience. They have been designed specifically for the more aggressive tuner who demands the most extreme shifter in terms of both looks and performance.

Spec:

- Fits 90-01 Integra

- Easy installation, reduce shift throw distance

- Each shifter comes with one year limited warranty.

- Polish finish

TOMEI Expreme Outlet Component Turbo Downpipe for Mitsubishi Evo X 4B11

KIT CONTENTS

■OUTLET COMPONENT

■GASKET (TURBO SIDE)

■GASKET (CATALYZER)

■CLAMP BAND

■BLIND PLUG

■COPPER WASHER

■STUD BOLT M10-40 P=1.25 (THREAD 12/26)

■FLANGE NUT M12 * P=1.25

■STICKER (EXPREME)

■BOLT SMOOTH PASTE

■INSTALLATION MANUAL

■STICKER (TOMEI)

■WARRANTY CARD

After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.

WIDE MOUTH

The smooth flowing design, without steps from the turbocharger. Manufactured with the lost wax process, combines both strength and beauty.

3 INCH PIPE

After numerous tests, the 3 inches (76.3mm) greatly increases both power and torque.

TORQUE & POWER

Wide mouth & 3 inch piping. Achieve large power & torque gains over stock.

GOOD DESIGN FOR TOOLS

The wide mouth was designed to be easy to install with the general common work tools.

O2 SENSOR BOSS FOR AFR GAUGES

The mouting boss is an M18, which makes it easy to fit the AFR sensor. Comes with a blind plug to seal the hole when not in use.

FLEXIBLE PIPE DESIGN

Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.

MIKALOR HIGH GRADE BANDS

The Supra Bands made by MIKALOR is what we have chosen to use, since they maintain the strongest torque to secure a proper strong connection. We also used Nejiname bolts.

Tomioka Racing Twin Scroll TD05-20G Turbo Kit for 02-07 Subaru WRX/STi

Tomioka Racing Twin Scroll Turbo line is catered to the die-hard Subaru fans! The twin scroll turbo is an e cient and economical way to replace or upgrade your current twin scroll set up on your Subaru. Twin Scroll Turbo are increasingly hard to nd these days, with the Tomioka Turbo they are direct bolt-on, featuring USDM length twin-scroll downpipe and also boast more boost power than the standard VF series turbo. With TD05 housing and twin-scroll set-up, Tomioka Turbo improves spool time compared to the standard TD05 turbo!

Contents of Kit:
- Twin Scroll Turbo
- Twin Scroll Manifold
- 3-Bolt Uppipe
- Twin Scroll USDM Downpipe
- Bracket

Application

All Subaru 2002+ w/ EJ engine

Subaru WRX 02-07

Subaru STi 02-07

Saab 92x 05-06

Tomioka Racing Twin Scroll TD06 Turbo Kit for 08-11 Subaru WRX / 05+ Legacy GT

Tomioka Racing Twin Scroll Turbo line is catered to the die-hard Subaru fans! The twin scroll set-up is now available for Subaru Impreza WRX 2008+ models. Twin scroll turbo is an efficient and economical way to replace or upgrade your current twin scroll set up on your Subaru. Twin Scroll Turbos are increasingly hard to find these days, with the Tomioka Turbo they are direct bolt-on, featuring USDM length twin-scroll downpipe and also boast more boost power than the standard VF series turbo. With TD06 housing and twin-scroll set-up, Tomioka Turbo improves spool time and raises power at the same time SPECIFICATIONS Compressor Inlet 55mm Compressor Outlet 68mm Turbine Inlet Turbine outlet Diameter 67mm Air Flow Rate 640cfm KIT CONTENTS Twin Scroll Turbo Twin Scroll Exhaust Manifold Twin Scroll USDM Downpipe Twin Scroll 3-Bolt Uppipe Bracket

Tomioka Racing High Flow Catted Downpipe for 08+ Subaru WRX/STi

Tomioka Racing Subaru High Flow Catted Downpipe for WRX/STi is a high quality 3-inch downpipe at an affordable price. The downpipe features 200-cell with ceramic substrate catalytic converter and ported flanges for a quicker and faster exhaust air flow compared to the standard OEM downpipe. Each downpipe is constructed from SUS304 grade stainless steel that gives it shine and durability that will last for years to come. Installation is a snap! The downpipe will fit like your OEM downpipe and comes with all the necessary hardware and gasket. The downpipe even comes with two EGT sensor bung in case you are running a gauge set-up on your car. If you're looking for the best bang for your buck down pipe look no further SPECIFICATIONS Pipe Stainless SUS304 Pipe Diameter 3 inch / 76mm Pipe Thickness 0.25 inch / 6.3mm Flange Thickness 0.5 inch / 12.5mm KIT CONTENTS Downpipe Gaskets Nuts

Tomioka Racing High Flow Catted Downpipe for 02-07 Subaru WRX/STi

Torque Solution Exhaust Mount for 05-10 Chevrolet Cobalt incl SS

Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kit..

•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA

Mishimoto Silicone Ancillary Hose Kit for 04-07 Subaru WRX/STi

The Mishimoto Subaru WRX/WRX STI Silicone Ancillary Hose Kit is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style. Will fit 2.5L turbo motors only.

Mishimoto Silicone Hose Kit for 02-04 Ford Focus SVT

The Mishimoto Ford Focus SVT Silicone Hose Kit is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto Silicone 76mm Airbox Hose for 02-07 Subaru WRX

The Mishimoto Subaru WRX Silicone 76mm Airbox Hose is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto Silicone Turbo Hose Kit for 97-02 Audi S4

The Mishimoto Audi S4 Silicone Turbo Hose Kits are made by combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance. Designed and engineered for a direct OEM fit, the Mishimoto Audi S4 Silicone Turbo Hose Kit is the perfect replacement to the stock S4 hoses. The kit is available in black, blue and red to suit your style.

Mishimoto Silicone Hose Kit for 91-99 Mitsubishi 3000GT / 91-99 Dodge Stealth

The Mishimoto Mitsubishi 3000GT 1991-1999 / Dodge Stealth 1991-1996 Silicone Hose Kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit. The perfect replacement to the stock 3000GT and Stealth hoses!

Fits both turbo and non-turbo applications

Mishimoto Silicone 80mm Airbox Hose for 02-07 Subaru WRX

The Mishimoto Subaru WRX Silicone 80mm Airbox Hose is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hose. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto Silicone Radiator Hose Kit for 95-98 VW Golf VR6

The Mishimoto Volkswagen Golf VR6 Silicone Hose Kit is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto Silicone Radiator Hose Kit for 88-91 BMW M3 E30

Mishimoto BMW E30 radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto Racing Thermostat for 90-97 Mazda Miata

The Mishimoto racing thermostat for the 1990-1997 Mazda Miata will promote greater cooling efficiency throughout your engine. The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats, also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.

MISHIMOTO THERMOSTAT ACTIVATES AT 62º C

ALSO FITS
Kia Sportage 95-02
Mazda 323 85-03
Mazda 626 88-92
Mazda B2600 89-02
Mazda Miata 90-97
Mazda MX-3 92-95 (4 cyl)

ENGINE CODES
BF
GD
NA

CHASSIS CODES
B6ZE
BP-ZE
B6-ME
B6D

Mishimoto Racing Thermostat for 92-99 BMW E36

The Mishimoto BMW E36 Racing thermostat fits all E36 applications. It will promote greater cooling efficiency throughout your engine. Mishimoto racing thermostats will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats, also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.

MISHIMOTO ACTIVATION TEMPERATURE
62º C

ALSO FITS
BMW 318I 84-95
BMW 318CI 91-95
BMW 318IS 91-95
BMW 318TI 1995
BMW 325I 93-95
BMW 325IS 92-95

BMW 525I 92-95
BMW 525IT 93-95

ENGINE CODES
S52
M52 (323; 328)
M50TU (325)

CHASSIS CODES
E36

Megan Racing OE-RS Catback Exhaust System for 05-10 BMW M5 E60 Blue Titanium Tips

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:
http://www.meganracing.com/tech/faqs.asp?id=67&subject=Are%20Megan%20Racing%20exhaust%20products%20street-legal?

Megan Racing OE-RS Catback Exhaust System for 05-10 BMW M5 E60 Polish Tips

Megan Racing OE-RS series cat backs are based on factory style, with bigger piping, OEM style polished mufflers and quiet sound. The cat back system is made stainless steel. All piping are mandrel bent with a high polished finish. Exhaust system comes with all the necessary hardware needed for a direct bolt on installation. Improves HP with minimal noise.

Being constructed of T-304 Stainless Steel this durable piece will easily handle the elements and offer you years of performance. Backed with our one-year manufacturers warranty, you will rest assured with your sound investment.

SPECIFICATIONS & FEATURES:

- 3.5" Quad Tips w/silencers

- 3" Piping

- *Deletes secondary catalytic converter

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents:
http://www.meganracing.com/tech/faqs.asp?id=67&subject=Are%20Megan%20Racing%20exhaust%20products%20street-legal?

Megan Racing Euro Street Series Coilovers Damper Kit for 06+ BMW 3-Series E92 2dr Coupe

The Euro Street Series is our new Luxury Package based off of our Street-Series coil-over line-up using similar specifications and design, but offering a more conservative spring and damper setup for a more comfortable ride, yet still providing a sporty feel and control.

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION: BMW 06+ E92 3-series 2Dr Coupe

SPRING RATES:
F: 62mm ID; 160mm length; 7 kg/mm
R: 62mm ID; 210mm length; 11 kg/mm

DAMPER SPECS:
F: 120mm stroke; 280mm length; M2 valving code
R: 130mm stroke; 280mm length; M1 valving code

- 32 Levels of Damper Force Adjustment

- Rubber Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1-year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing Euro Street Series Coilovers Damper Kit for 09+ VW CC Sedan

The Euro Street Series is our new Luxury Package based off of our Street-Series coil-over line-up using similar specifications and design, but offering a more conservative spring and damper setup for a more comfortable ride, yet still providing a sporty feel and control.

Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.

Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.

SPECIFICATIONS & FEATURES:

APPLICATION: Volkswagen CC Sedan 09+

SPRING RATES:
F: 62mm ID; 180mm length; 7 kg/mm
R: ID; S200mm length; 6 kg/mm

DAMPER SPECS:
F: 120mm stroke; 240mm length; M2 valving code
R: 147mm stroke; 240mm length; A13 valving code

- 32 Levels of Damper Force Adjustment

- Rubber Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Single-Cylinder Design

- Aluminum Brackets

32 Levels of Adjustment:

1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.

- All coil-over damper kits come with 1-year manufacturer-defect warranty.

- All Hardware is Included

Megan Racing Lowering Springs for 98-02 Toyota Corolla

Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.
The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “streetable” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)

Spec:

- Color: Orange

- Lower rate: 1.25" Front, 1.25" Rear

Megan Racing Lowering Springs for 02-07 Saturn Vue

Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging.”

The result is a spring that specifically offers race-car handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “street-able” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (NOTE: Spring rates and drop amount vary by different vehicle application and chassis load.)

SPECIFICATIONS:

Spring Rate:
Front: 198 lbs/in
Rear: 270 lbs/in

- Color: Orange

Megan Racing Lowering Springs for 06+ Dodge Charger

Megan Racing Lowering Springs for 01-10 Lexus SC430

Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.
The result is a spring that specifically offers race car handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “streetable” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)

- Color: Blue

- Lower front 1.25", rear 1".

Megan Racing Lowering Springs for 08+ BMW M3 E92

Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.

The result is a spring that specifically offers race-car handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “street-able” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)

Specifications & Features:

Application: BMW E92 M3 2008+

- Color: Red

- Lower rate: 1.5" Front, 1.5" Rear

Megan Racing Lowering Springs for 09+ BMW 7 Series / 11+ Alpina B7

Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.

The result is a spring that specifically offers race-car handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “street-able” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)

Specifications & Features:

Application: BMW F01 7-series 2009+ and Alpina B7 2011+

- Color: Red

- 7 Series: Lower rate: 2" Front, 1.75" Rear

- Alpina B7: Lower rate: 1" Front, 0.75" Rear

Torque Solution Rear Differential Mount for 10+ Hyundai Genesis Coupe

Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Hyundai Genesis Coupe Rear Differential Mount. This system was designed to reduce movement of the rear differential. This helps to improve transmission feedback when shifting, and gives the car a more solid feel under hard acceleration. Developed to perform under the most extreme conditions, our Urethane Components bridge the gap between ordinary rubber and cheap plastics used in current aftermarket bushings by offering a unique urethane specifically chosen by Torque Solution engineers to ensure product performance and reliability. All this makes it easy for us to stand behind our products with a lifetime warranty. This mount is to be used as an add on to the missing mount that Hyundai did not include on the passenger side of the differential.

• Improved 60fts / e.t's
• Can be installed in your garage
• Reduced Wheel Hop
• Eliminates excessive rearend slop
• Reduces rear end float under acceleration
• Solid feeling gear changes
• Street and track torture tested
• 95A durometer polyurethane
• Lifetime Warranty
• Made in USA

Ferodo DS3000 Front Brake Pads for 06-07 Subaru WRX 4-pot

Ferodo DS3000 brake pad has set the braking standard in touring car and GT championships worldwide since 1998. In addition to its reduced bedding-in time (approximately 50 percent quicker than other materials), the main characteristics of the DS3000 are:
Very high coefficient of friction (0.62) at all speeds and temperatures
High initial bite
Predictability and control because of the unvarying torque output
Low off-brake drag

Warning: DS3000 is not suitable for normal on-road use.

Ferodo DS3000 Front Race Pads for Subaru STi / Mitsubishi Evo

Ferodo DS3000 brake pad has set the braking standard in touring car and GT championships worldwide since 1998. In addition to its reduced bedding-in time (approximately 50 percent quicker than other materials), the main characteristics of the DS3000 are:
Very high coefficient of friction (0.62) at all speeds and temperatures
High initial bite
Predictability and control because of the unvarying torque output
Low off-brake drag
Warning: DS3000 is not suitable for normal on-road use

Ferodo DS2500 Rear Brake Pads for 06-07 Subaru WRX 2-pot Calipers

Ferodo's DS2500 racing brake pads represent a new generation of friction material that's low in compressibility, ensuring a firm pedal while providing great disc and pad life.
These pads were developed with characteristics that make them perfect for track days, including a consistent coefficient of friction (0.50) at any temperature, providing very predictable braking and great pedal modulation.
Combined with low wheel dusting and good noise characteristics, this product is the brake pad for the driver who needs the track-day braking performance out of a pad they can drive on the street.

Ferodo DS3000 Rear Race Pads for Subaru STi / Mitsubishi Evo

Ferodo DS3000 brake pad has set the braking standard in touring car and GT championships worldwide since 1998. In addition to its reduced bedding-in time (approximately 50 percent quicker than other materials), the main characteristics of the DS3000 are:
Very high coefficient of friction (0.62) at all speeds and temperatures
High initial bite
Predictability and control because of the unvarying torque output
Low off-brake drag
Warning: DS3000 is not suitable for normal on-road use.

Ferodo DS2500 Front Brake Pads for 08+ Subaru WRX

Ferodo's DS2500 racing brake pads represent a new generation of friction material that's low in compressibility, ensuring a firm pedal while providing great disc and pad life.

These pads were developed with characteristics that make them perfect for track days, including a consistent coefficient of friction (0.50) at any temperature, providing very predictable braking and great pedal modulation.

Combined with low wheel dusting and good noise characteristics, this product is the brake pad for the driver who needs the track-day braking performance out of a pad they can drive on the street.

Ferodo DS2500 Brake Pads for Nissan GT-R / Viper / Ferrari / Jaguar FMSI D810

Ferodo DS2500 Front Brake Pads for 06-07 Subaru WRX 4-pot Calipers

Ferodo's DS2500 racing brake pads represent a new generation of friction material that's low in compressibility, ensuring a firm pedal while providing great disc and pad life.
These pads were developed with characteristics that make them perfect for track days, including a consistent coefficient of friction (0.50) at any temperature, providing very predictable braking and great pedal modulation. Combined with low wheel dusting and good noise characteristics, this product is the brake pad for the driver who needs the track-day braking performance out of a pad they can drive on the street.

Ferodo DS2500 Rear Brake Pads for 08-11 Mitsubishi Evo X

Ferodo's DS2500 racing brake pads represent a new generation of friction material that's low in compressibility, ensuring a firm pedal while providing great disc and pad life.
These pads were developed with characteristics that make them perfect for track days, including a consistent coefficient of friction (0.50) at any temperature, providing very predictable braking and great pedal modulation. Combined with low wheel dusting and good noise characteristics, this product is the brake pad for the driver who needs the track-day braking performance out of a pad they can drive on the street

Ferodo DS2500 Rear Brake Pads for Subaru STi / Mitsubishi Evo

Ferodo DS2500 Front Brake Pads for Subaru STi / Mitsubishi Evo

Ferodo's DS2500 racing brake pads represent a new generation of friction material that's low in compressibility, ensuring a firm pedal while providing great disc and pad life.
These pads were developed with characteristics that make them perfect for track days, including a consistent coefficient of friction (0.50) at any temperature, providing very predictable braking and great pedal modulation. Combined with low wheel dusting and good noise characteristics, this product is the brake pad for the driver who needs the track-day braking performance out of a pad they can drive on the street.

JPM Elbow Pad Black Leather Red Stitching for 04-09 Honda S2000 All

The JPM Elbow Pad Cover for the Honda S2000 is a stylish replacement to the bland perforated stock elbow pad and a perfect companion to your custom JPM S2000 Shift Boot. Following existing body lines in the S2000 center console, the JPM elbow pad accents these areas with a three piece design unique to JPM Coachworks.

While install instructions are listed below, you can send your pad base in for professional installtion by JPM at no additional charge. If you choose to send your elbow pad in for install, JPM can repad your base for no additional charge as well. Look to the installation for a walk through on how to remove your elbow pad base safely and select the installation box in the drop down options.

The JPM Elbow Pad Cover is designed to flow with the lines of your AP1 or AP2 S2000. Be sure to select the year model of your S2000 so that you receive the elbow pad that is properly sized for your model.

Pair It:

The JPM Elbow Pad Cover for the S2000 is a great compliment to the JPM Shift Boot.

JPM 5MT Shift Boot Leather Red Stitching for 08-11 Subaru WRX

Experience true sport-luxury with our genuine Alcantara products inside the cockpit of your Subaru. Our shift boots are made, in-house, from genuine Alcantara to factory specifications. We piece each part together using a medium weight industry standard polyester thread. Each seam is then treated to a French or double stitch using heavy weight polyester thread for maximum colorfastness, durability and appeal. We have tweaked key areas of each pattern to improve fitment and overall aesthetics. As a result, each product installs perfectly each and every time.

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads.

JPM Brake Boot Steel Grey Alcantara Silver Stitching for 08-11 Subaru WRX / STi

Experience true sport-luxury with our genuine Alcantara or Italian leather products inside the cockpit of your Subaru. Our brake boots are made, in-house, from the highest quality materials available on today's market to factory specifications. We piece each part together using a medium weight industry standard polyester thread. Each seam is then treated to a French or double stitch using heavy weight polyester thread for maximum colorfastness, durability and appeal. We have tweaked key areas of each pattern to improve fitment and overall aesthetics. As a result, each product installs perfectly each and every time.

Self installation of this product requires the use of spray adhesive. JPM Coachworks recommends DAP® Weldwood® High Strength Spray Adhesive for all DIY installs. This product can be found in our catalog here: DAP® Weldwood® It can also be easily added to your order by selecting the appropriate check box in the options for this product.

Worried about messy adhesives? Don't be! Please select the install option above and we will take care of the product's installation for you! Just send your OEM trim ring(s) into our facility and we'll ship them right back out to you, installed with your new JPM boot(s)!

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads.

JPM Cluster Hood + Visor Steel Grey Silver Stitching for 08-11 Subaru WRX / STi

Experience true sport-luxury with our genuine Alcantara or Italian leather products inside the cockpit of your Subaru.Our cluster hoods are hand-wrapped, in-house, from genuine Alcantara to factory specifications and feature double-stitched seams with heavy weight polyester thread for maximum colorfastness, durability and appeal. We piece each part together using a medium weight industry standard polyester thread. Each seam is then treated to a French or double stitch using heavy weight polyester thread for maximum colorfastness, durability and appeal. We have tweaked key areas of each pattern to improve fitment and overall aesthetics. As a result, each product installs perfectly each and every time.

This product includes a replacement OEM cluster hood + visor (PN 66180FG110JL). Want to send yours in and save $60? Be sure to check the "I will provide my own cluster-hood" checkbox above!

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads.

JPM 6MT Shift Boot Black Alcanatara Red Stitching for 04-07 Subaru STi

Experience true sport-luxury with Alcantara® Cover or Italian leather products inside the cockpit of your Subaru. Our shift boots are made, in-house, from the highest quality materials available on today's market to factory specifications. We piece each part together using a medium weight industry standard polyester thread. Each seam is then treated to a French or double stitch using heavy weight polyester thread for maximum colorfastness, durability and appeal. We have tweaked key areas of each pattern to improve fitment and overall aesthetics. As a result, each product installs perfectly each and every time.

Self installation of this product requires the use of spray adhesive. JPM Coachworks recommends DAP® Weldwood® High Strength Spray Adhesive for all DIY installs. This product can be found in our catalog here: DAP® Weldwood® It can also be easily added to your order by selecting the appropriate check box in the options for this product.

Worried about messy adhesives? Don't be! Please select the install option above and we will take care of the product's installation for you! Just send your OEM trim ring(s) into our facility and we'll ship them right back out to you, installed with your new JPM boot(s)!

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads.

JPM 6MT Shift Boot Royal Blue Alcanatara Red Stitching for 04-07 Subaru STi

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads

JPM Brake Boot Black Alcantara Red Stitching for 04-07 Subaru WRX / STi

Experience true sport-luxury with Alcantara® Cover or Italian leather products inside the cockpit of your Subaru. Our brake boots are made, in-house, from the highest quality materials available on today's market to factory specifications. We piece each part together using a medium weight industry standard polyester thread. Each seam is then treated to a French or double stitch using heavy weight polyester thread for maximum colorfastness, durability and appeal. We have tweaked key areas of each pattern to improve fitment and overall aesthetics. As a result, each product installs perfectly each and every time.

» Built from genuine Alcantara® Cover or Italian leather.
» Unique three piece design for improved aesthetics over OEM.
» Secures to brake handle assembly with "invisible" zip-tie (included).
» Features French (double-stitched) seams stitched with luxuriously thick thread.
» Includes a "tocco finale" or final touch of hand-stitching.
» Installs in 30 minutes or less using no tools and 3M #90 adhesive.
» Made in USA.

Self installation of this product requires the use of spray adhesive. JPM Coachworks recommends DAP® Weldwood® High Strength Spray Adhesive for all DIY installs. This product can be found in our catalog here: DAP® Weldwood® It can also be easily added to your order by selecting the appropriate check box in the options for this product.

Worried about messy adhesives? Don't be! Please select the install option above and we will take care of the product's installation for you! Just send your OEM trim ring(s) into our facility and we'll ship them right back out to you, installed with your new JPM boot(s)!

Pair It: Our alcantara brake boots are well-matched with our alcantara shift boots.

Make It Your Own: All of our products can be customized with any of our materials and threads

JPM Brake Boot Royal Blue Alcantara Red Stitching for 04-07 Subaru WRX / STi

» Built from genuine Alcantara® Cover or Italian leather.
» Unique three piece design for improved aesthetics over OEM.
» Secures to brake handle assembly with "invisible" zip-tie (included).
» Features French (double-stitched) seams stitched with luxuriously thick thread.
» Includes a "tocco finale" or final touch of hand-stitching.
» Installs in 30 minutes or less using no tools and 3M #90 adhesive.
» Made in USA.

Make It Your Own: All of our products can be customized with any of our materials and threads

JPM Elbow Pad Black Alcantara Center Black Leather Sides Red Stitching for 04-09 Honda S2000

Pair It:

The JPM Elbow Pad Cover for the S2000 is a great compliment to the JPM Shift Boot.

JPM 5MT Shift Boot Leather Silver Stitching for 08-11 Subaru WRX

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads

JPM 5MT Shift Boot Steel Grey Alcantara Silver Stitching for 08-11 Subaru WRX

Pair It: Our alcantara shift boots are well-matched with our alcantara brake boots.

Make It Your Own: All of our products can be customized with any of our materials and threads.

Cosworth High Flow Fuel Rail Kit for 02-07 WRX & 2007 STi/LGT

The Cosworth High Flow Subaru Fuel Rail Kit is specifically designed for "top feed" style fuel injectors and is configurable for various fuel line installation scenarios. Each fuel rail is machined from solid aluminum and features a natural hard anodized finish for lasting durability. Each kit includes dash 6 AN fittings that will allow you to install fuel lines of your choice. This kit is intended for race and high performance applications and is not intended as a direct replacement for the factory fuel lines and fuel rails. Can be used with the Cosworth TGV Delete Kit.

Torque Solution Solid Rear Subframe Bushings for Porsche 996/997 All

A Porsches rear subframe is the heart of the suspension. When the subframe moves, so do all the suspension mounting points. Replacing the stock rubber bushings with solid ones limits both drivetrain and suspension movement, eliminating the unwanted movement and keeping your Porsches setup the way it should be. These solid mounts will also help prevent the subframe from excessive movement during racing conditions. We spend lots of extra time machining each Torque Solution subframe mount to keep your car as solid as possible. CNC machined from high grade billet aluminum and nickel plated steel for precision and quality. These solid subframe bushings fit all Porsche 996/997 models..

Sold as a kit of 12 pieces for all 6 mounting points..

-Eliminates Subframe Movement
-Lowers rear of car 1/2" without affecting suspension geometry
-Made out of 6061 Billet Aluminum & Plated Steel
-Street and track torture tested

-Life Time Warranty
-Made in USA

Torque Solution Universal Stainless Steel O2 Sensor Bung

Stainless Steel 18mm X 1.5 Weld-on 02 bung for adding Oxygen sensors to your exhaust.

•304 Stainless Steel
•Life Time Warranty
•Made in USA

Torque Solution Shifter Base Bushing Kit for 91-94 Mitsubishi Eclipse

• Cnc machined 6061-T6 billet aluminum
• Installs in under 30 minutes
• Black anodized
• Life Time Warranty
• Made in USA

Torque Solution Solid Rear Differential Mount for 08+ Mitsubishi Evo X MR/GSR

The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

•Reduces the " CLUNK " when shifting hard
•Reduces wheel hop / traction loss
•Improved 60fts / e.t's
•Road Race torture tested
•6061 anodized billet
•25% Lighter than Stock
•LifeTime Warranty
•Made in USA

GTSPEC Rear Strut Brace for 93-02 Toyota Supra

GTSPEC Rear Strut Brace

GTSPEC Front Strut Brace for 93-02 Toyota Supra

GTSPEC Front Strut Brace

GTSPEC Rear Lower Tie Brace for 93-02 Toyota Supra

GTSPEC Rear Lower Tie Brace

HKS SSQV4 Blow Off Valve Kit for 10+ Mazdaspeed 3

In 1994, HKS introduced the first Sequential Blow-Off Valve featuring a unique, pull-type, sequential valve structure and a differential pressure control system. This advanced pull-type relief system allowed for stable operating ranges from low to high boost pressures. Since imitation is the highest form of flattery, HKS has once again redesigned the physical aspects of the Super Sequential Blow Off Valve to thwart off the counterfeiters.

Reliable functionality of the Super SQV 4 is unchanged and utilizes the same mounting flanges as all previous generation SSQVs. This assures compatibility with all optional HKS SSQV inserts, recirculation fittings and recirculation kits.

Super SQV 4 features include a nickel-plated, die-cast metal secondary valve, which is swaged to the primary valve, a stainless steel C-Clip and spring to increase sealing and durability.

Auto Meter Full A-Pillar Triple Gauge Pod (Black) for 05-09 Chevrolet Corvette

This Auto Meter pod completely covers the factory A-Pillar and holds three gauges. Only available in black.

Designed to Fit Models with A-Pillar Speaker Only

Download Instructions HERE

Auto Meter Full A-Pillar Dual Gauge Pod (Black) for 05-09 Chevrolet Corvette

This Auto Meter pod completely covers the factory A-Pillar and holds two gauges. Only available in black.

Designed to Fit Models with A-Pillar Speaker Only

Download Instructions HERE

Auto Meter Full A-Pillar Dual Gauge Pod (Black) for 03-04 Chevrolet Corvette

This Auto Meter pod completely covers the factory A-Pillar and holds two gauges. Only available in black.

Download Instructions HERE

Auto Meter Full A-Pillar Dual Gauge Pod (Black) for 97-02 Chevrolet Corvette

This Auto Meter pod completely covers the factory A-Pillar and holds two gauges. Only available in black.

*03-04 Pod Shown

Download Instructions HERE

GTSPEC Front Lower Subframe Reinforcement Brace for 93-02 Toyota Supra

GTSPEC Front Lower Subframe Reinforcement Brace

Torque Solution Universal O2 Sensor Extender

Applications: Universal

On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter. This O2 sensor is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle.

This Steel O2 sensor extender is basically for keeping the O2 sensor out of exhaust pipe. These also work when running a hi flow cat or a test pipe. It's a very simple 10~15 mins installation, This extender will fit most O2 sensors with 18mm thread size.

•Improved Gas mileage
•Fixes CEL in most cases
•Life Time Warranty
•Made in USA

Torque Solution Stainless Clutch Line Kit for Porsche 996/997 All

Torque Solution Porsche 996/997 Steel Braided Clutch Line Kit was designed as a direct replacement for the stock rubber line. As many customers have come to find out, the clutch engagement feels very soft/weak and the actual engagement point is difficult to hit on the spot accurately. This results in slipping the clutch more than is needed.

This mod is for anyone who is looking to get rid of that unpredictable clutch engagement. After installation of the stainless line kit will you will notice improved feedback and overall feel of the clutch system. A braided stainless steel shell provides protection against abrasion and corrosion.

APR Carbon Fiber Side Rocker Extensions Side Skirts for 08+ Nissan GT-R35

APR Side Rocker Extensions are the next step to help aerodynamically tune the handling of a car. Made of lightweight and durable carbon fiber composites, APR Side Rocker Extensions help reduce lift at high speeds by preventing air at the sides of the car from rolling underneath the car. The reduced lift helps to stabilize the car during high-speed cornering and helps to increase traction for faster lap times.

Features:

Carbon Fiber Construction
All APR Side Rocker Extensions are made in carbon fiber composites for lightweight and high strength.
Vehicle Specific Design
APR Side Rocker Extensions are designed and manufactured for specific vehicles for perfect fitment.
Mounting Hardware Included
Screws, nuts, and washers are included to allow you to install the APR Side Rocker Extensions to your car.

APR Carbon Fiber Formula GT3 Mirrors for 09+ Nissan GT-R35

When it comes to reducing aerodynamic drag to a car, the APR Formula GT3 Mirrors are an excellent choice. The APR Formula GT3 Carbon Fiber Mirrors are designed to give race inspired looks with the functionality of reducing drag and eliminating blind spots with wide angle mirror lenses.

Features:

Carbon Fiber Construction
All APR Formula GT3 Mirror housings are reinforced with layers of carbon fiber sheets for weight reduction and added strength.
Wide Range of Adjustment
Every Formula GT3 Mirror includes a left to right pivot arm at the mirror housing with an adjustable ball stub rod to allow a wide range of adjustment.
Aerodynamic Shape to Reduce Drag
These carbon fiber mirrors are compact and aerodynamically shaped for a low drag coefficient.
Billet Aluminum Bases for Easy Installation
Lightweight & durable billet aluminum mounting bases are specifically designed to factory specifications for easy installation and clean fit and finish.
5.75” x 2.50” Wide Angle Convex Mirror Lens
Convex lenses are used on both driver and passenger sides mirrors to eliminate blind spots. Blue anti-glare mirror lenses are included to reduce reflections from headlight glare during nighttime driving.
Mounting Hardware Included
All screws, bolts and mounting gaskets are all included to allow you to install the APR Formula GT3 Mirrors to your car.

APR GTC-500 Adjustable Wing for 06+ Dodge Viper Coupe

Spanning 70 inches, the GTC-500 is the largest aftermarket adjustable wing available. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag.

All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. The results of this analysis are available here.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber composite. Supporting the carbon fiber airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

- A - 70"
- B - Variable cord length (12.75" Inner/9" Outer).
- C - 10.5"
- D - 30.5"
- E - 9.0"
- F - 12"
- G - 5"

Mounting bases sit 30.5" apart (center-to-center).

Universal wing pictured.

APR GTC-500 Adjustable Wing for 03+ Dodge Viper Convertible

Spanning 70 inches, the GTC-500 is the largest aftermarket adjustable wing available. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag.

All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. The results of this analysis are available here.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber composite. Supporting the carbon fiber airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

- A - 70"
- B - Variable cord length (12.75" Inner/9" Outer).
- C - 10.5"
- D - 26.5"
- E - 9.0"
- F - 12"
- G - 5"

Mounting bases sit 26.5" apart (center-to-center).

Universal wing pictured.

APR GTC-500 Adjustable Wing for 06+ Audi R8

Spanning 70 inches, the GTC-500 is the largest aftermarket adjustable wing available. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag.

All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. The results of this analysis are available here.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber composite. Supporting the carbon fiber airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

Mounting bases sit at edges of trunk lid.

Universal wing pictured.

APR GTC-500 Adjustable Wing for 90-05 Acura NSX

Spanning 70 inches, the GTC-500 is the largest aftermarket adjustable wing available. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag.

All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. The results of this analysis are available here.

Each GTC Series airfoil is composed of lightweight and durable carbon fiber composite. Supporting the carbon fiber airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

- A - 70"
- B - Variable cord length (12.75" Inner/9" Outer).
- C - 10.5"
- D - OEM
- E - 13.0"
- F - 12"
- G - 5"

Mounting bases cover factory spoiler/wing holes.

Universal wing pictured.

APR Universal GTC-500 Carbon Fiber Adjustable Wing

Mounting bases sit 47" apart (center-to-center).

APR Front Air Dam for 08+ Nissan GT-R35

Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance. The APR Performance Front Air Dam integrates with the factory front bumper to:

- Reduce lift.
- Increase front-end stability.
- Improve high-speed cornering grip

This Front Air Dam includes two integrated brake cooling ducts (2.5" inner diameter). These cooling ducts can be used to attach cooling hoses (not included) that lead to the brake system for maximum braking consistency on the track.

This Front Air Dam also utilizes a built-in aerodynamic splitter design that creates a high-pressure region of air atop the protruding surface, further reducing lift and increasing net downforce.

Carbon Fiber, w/ 2.5" brake cooling ducts

Megan Racing Type-2 Catback Exhaust for 09+ Nissan Maxima

One of Megan Racing s strongest products, the Cat-Back System is made by SUS 304 Stainless Steel with fully polished surface, CNC machined flanges and are mandrel bent. Its aggressive styling, and deep, strong tone are just part of the MR Cat-Back. It is also able to improve horse power and performance with its straight-through design. We have 2.5” piping and 3” piping for certain models, a tip that is specially designed to reach the maximum performance, and have a perfect match on body styling. As a direct bolt on, each Cat-Back comes with 12 months warranty.

Spec:

- Type 2 Series

- Dual 2.5" stainless tips each side

- Oval muffler style

- 4 pieces total, 2.5" piping

- 100% stainless steel with polish finish

- Producing strong, deep and noticable sound

- Gain horse power, faster response

- Comes with gaskets and bolts

- Warranty included

Megan Racing OE-RS Catback Exhaust (Blue Tips) for 09+ Nissan Maxima

Megan Racing OE-RS Catback Exhaust (SS Tips) for 09+ Nissan Maxima

Megan Racing Universal M-VO Turbo Muffler

With law enforcment becoming ever more strict with modifying your vehicle with performance parts, the need for more discreet performance parts have increased to keep a low profile.

The M-VO is designed with a more conservative oval design with stylish burn/blue tip rather than the common Canister style universal mufflers. These are more discreet to law enforcement and although the feature are same as perforated-core design as the Canister mufflers that we sell, they offer a deeper more mellow tone due to increased amount of packing that is contained within the muffler casing.

Spec:

- 3.5" tip, 3" piping, total lenght 18" and body width 10", and 6.75" high.

- 100% sus 304 stainless steel

- Silver Chrome finish with rolled blue tip

- Sound is quiet and deep tone

- Universal

- 1 year limited warranty

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents: http://www.meganracing.com/tech/faqs.asp?id=67&subject=Are%20Megan%20Racing%20exhaust%20products%20street-legal?

Megan Racing Universal M-VO Muffler

With law enforcment becoming ever more strict with modifying your vehicle with performance parts, the need for more discreet performance parts have increased to keep a low profile.

The M-VO is designed with a more conservative oval design with stylish burn/blue tip rather than the common Canister style universal mufflers. These are more discreet to law enforcement and although the feature are same as perforated-core design as the Canister mufflers that we sell, they offer a deeper more mellow tone due to increased amount of packing that is contained within the muffler casing.

Spec:

- 3.5" tip, 2.5" piping, total lenght 18" and body width 10", and 6.75" high.

- 100% sus 304 stainless steel

- Silver Chrome finish with rolled blue tip

- Sound is quiet and deep tone

- Universal

- 1 year limited warranty

NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.

Please follow the link for more information as well as street-legality information for California residents: http://www.meganracing.com/tech/faqs.asp?id=67&subject=Are%20Megan%20Racing%20exhaust%20products%20street-legal?

Megan Racing Rear T230 Camber Arms for 99-06 Toyota Celica

Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.

Megan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements.

These Rear Arms are adjustable to fine tune your cars handling in the rear. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability.

Alignment is crucial to the handling of your vehicle. Remembering that the only thing that touches the ground is your "Contact Patch" of your tires you have to make sure that your tires and wheels are doing exactly what you want. With this you must make sure you have the proper camber, caster and toe as well as make sure they are all working together and not against each other.

SPECIFICATIONS & FEATURES:

Application
Toyota Celica 1999-2006

- 150% Harder that stock bushings

- Made with high-strength and anti-craking rubber material

- Rubber viscosity is around 2000KGS

- Forged

Megan Racing 22mm Rear Adjustable Sway Bar for 95-98 Nissan 240SX V2

The first thing you will notice when having the Megan Racing sway bars on your vehicle is reduction of body lean/roll. Megan Racing sway bars are used for tuning the handling balance and behavior of your vehicle. These bars' extra adjustment ability will also help reducing under or oversteer of your car. With these bars, they will make your drifting/road racing experience a little easier to predict.

It's constructed from high-grade steel. Each bar are made from a CNC machine for precise accuracy and sealed with a Megan Racing blue powder coat to prevent rust and corrosion.

RECOMMENDED FOR RACING PURPOSES ONLY!!!!

Thickness: REAR 22mm
Design Style: Solid Adjustable Type (2 holes) with TPV (Thermoplastic Vulcanizate) Stabilizing Bushings

Megan Racing 28mm Front Adjustable Sway Bar for 95-98 Nissan 240SX V2

The first thing you will notice when having the Megan Racing sway bars on your vehicle is reduction of body lean/roll. Megan Racing sway bars are used for tuning the handling balance and behavior of your vehicle. These bars' extra adjustment ability will also help reducing under or oversteer of your car. With these bars, they will make your drifting/road racing experience a little easier to predict.

It's constructed from high-grade steel. Each bar are made from a CNC machine for precise accuracy and sealed with a Megan Racing blue powder coat to prevent rust and corrosion.

RECOMMENDED FOR RACING PURPOSES ONLY!!!!

Thickness: FRONT 28mm
Design Style: Solid Adjustable Type (3 holes) with TPV (Thermoplastic Vulcanizate) Stabilizing Bushings

Megan Racing 22mm Rear Adjustable Sway Bar for 89-94 Nissan 240SX V2

Megan Racing 28mm Front Adjustable Sway Bar for 89-94 Nissan 240SX V2

The first thing you will notice when having the Megan Racing sway bars on your vehicle is reduction of body lean/roll. Megan Racing sway bars are used for tuning the handling balance and behavior of your vehicle. These bars' extra adjustment ability will also help reducing under or oversteer of your car. With these bars, they will make your drifting/road racing experience a little easier to predict.

It's constructed from high-grade steel. Each bar are made from a CNC machine for precise accuracy and sealed with a Megan Racing blue powder coat to prevent rust and corrosion.

RECOMMENDED FOR RACING PURPOSES ONLY!!!!

Thickness: FRONT 28mm
Design Style: Solid Adjustable Type (3 holes) with TPV (Thermoplastic Vulcanizate) Stabilizing Bushings

Megan Racing Rear Toe Control Arms for 01-06 Lexus LS430

Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.

It s within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.

When the LS430 chassis is lowered a significant amount, the rear wheels tend to toe out, which can cause problematic issues such as the rear end coming out in corners. These rear toe control arms will help re-align the car when ride heights are lowered considerably from original ride height and eliminate certain amount of uneven tire wear.

Toe Control Arms: These control static toe and toe change during suspension compression. When lowered aggressively, our cars toe curve is significantly changed, becoming “steeper” (more change with less movement).

- Will fit 2001-2006 Lexus LS430

- Adjustable lengths to tune Rear-Toe

- Pillow ball bearing replace OEM rubber bushing.

- Durable Steel construction to withstand high-stresses of competition.

- Powder coated with brilliant blue finish for years of performance.

Megan Racing Rear Traction Rods for 01-06 Lexus LS430 Sedan

Car alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, understeer, oversteer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have understeer and for optimum tire wear at stock height; understeer is often undesired from a performance standpoint and almost all performance driven applications are lowered.

Megan Racing Inc. has developed reinforced and adjustable control arms to accomidate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powdercoated with a 3-Stage process to ensure durability and protection against the elements.

These Traction rods allow for fine-tuned adjustments to the rear suspension geometry. By changing the length of the traction rod you change the position and pitch of which the suspension rotates upon and you change the amount of "Anti-Squat" of the rear. Although the adjustment is minimal, it can change the behavior or the vehicle during weight transfer.

- Constructed of Steel Alloy for Lightweight yet Durable performance.
- Hard Rubber bushings for a more direct feel and driving experience.
- Easy to access turnbuckle-style adjustment.
- Can be adjusted without removing from the vehicle.