Used Chemical and Process Equipment

Used Dryers - Fluid Bed Batch While Inventory Lasts

noreply@blogger.com (Contractor) — Fri, 10 Feb 2012 17:56:00 +0000

Featured pharma equipment from FEDERAL EQUIPMENT in inventory this week: Fluid Bed Dryers! Call 877.503.8635 now while they last!

Used Dryers - Fluid Bed Batch,Vfc-15M Vector Fluid Bed Dryer, S/S, Unused for sale. - More than 15,000 used process equipment items in inventory.

Used Dryers - Fluid Bed Batch,Vfc-15M Vector Fluid Bed Dryer, S/S, Unused for sale along with 15,000+ other used process equipment items including Used Dryers - Fluid Bed Batch in stock and ready

PUBLIC AUCTION USED EQUIP - Mfr. of Home Hardware Products

noreply@blogger.com (Contractor) — Fri, 10 Feb 2012 16:47:00 +0000

JOHN STERLING CORPORATIONAuction Type Live & Webcast

Start Date & Time : Thursday Feb 16, 2012 10:00 AM CST

Inspection/Preview : Wednesday Feb 15, 2012 - 9:00AM to 4:00PM CST

Sale Location: 11600 Sterling Pkwy, Richmond, IL 60071

Buyers Premium : 15% onsite, 18% online

Roll Formers, Presses, Press Brakes, Coil Equipment, Tool Room Equipment, Forklifts, Racking, General Plant Equipment, and Much More.

For more information visit PPL Auctions website

Phoenix Arizona Used Equipment Auction ends feb 21

noreply@blogger.com (Contractor) — Thu, 09 Feb 2012 21:38:00 +0000

Outdoor AZ Corp (Formerly ShelterClean)Online Auction Ends: Tuesday, Feb 21st at 2pm MST Phoenix, AZ

FEATURING: (8) 2006 Ford F350 pickup trucks, (2) 2006 Ford F150 pickup trucks, (4) Landa power washers, (4) Coleman Powermate 6875 generators, Floor machines, wet/dry vacuums and more.
Sale Date & Time:
Online Auction ends: Tue, Feb 21st at 2pm MST

Auction Location:
3640 E Washington St Phoenix, AZ

Preview Location(s): Same as Site

Preview Time(s): Mon Feb 20th from 9am to 4pm or by appointment

Contact:
Matt Gossett
(248) 589-9781

or go to Maynards Industries Auction website

GM Opel Spain - Machine Tools Auction ends feb 29 2012

noreply@blogger.com (Contractor) — Thu, 09 Feb 2012 19:35:00 +0000

GM/Opel Spain - Machine Tools Auction
Online Auction Ends FEB 29
conducted by

Featuring:ELB Horizonal Grinding Machine: Optimal 5375 5PS work area 600 / 375 / 375 mm, table: travel 100 - 800 mm / feed 1 - 30 m/min / max load 400 kg, Vertical travel 375 mm / feed 180 mm/Min, accuracy 0,001 mm, magnetic clamping plate, coolant + filtering unit
GEMINIS parallel Lathe GE 1400-S center height 700 mm, max turning length 3.000 mm max face plate/chuck dia 1.100mm, max swing in gap 1.800 mm, max swing over bed 1.440 mm, turning speeds 2,24 - 710 rpm, min/max dia in steady 120 - 500 mm
NICOLAS CORREA Bed Type Milling Machine A-10 X/Y/Z 1.300/630/630 mm, table 1.500 x 630 mm, universal-angle-milling head, CNC HEIDENHEIN TNC 355
AICHELIN-COEL VCTR 446 Vacuum Oven
DOIMAK Cylinder Grinding Machine RCN 1000 G
...and more!
            1992 Doimak RCN-G 1000
            1981 Geminis GE 1400S
            1992 Gildemeister CTX400
            1981 HIDRO-PRECIS RE-1500
            1981 Mitsui Seiki J6BD
            Schuette WU400cnc4

Sale Date & Time:
Online Auction ends Wed Feb 29, at 5pm CET

Sale Location:
Edificio 49 Ctra. Nal. 232 Km 29, Figueruelas, Zaragoza, Spain

Preview Times:
Fri Jan 27 from 10am to 4pm CET
        or by Appointment

Contact:
Maynards Europe - Sebastian Geissler
+49 8151 9989753 | SebastianG@maynards.com

CNC Lathe Cincinnati Avenger Used Auction

noreply@blogger.com (Contractor) — Sun, 22 Jan 2012 22:50:00 +0000

Used equipment auction Cincinnati Avenger- by MMI Auction

Ends:

01/25/2012 02:20:00 PM

CINCINNATI
AVENGER

CNC Lathe
Located in: USA

New in 1994
CNC Acramatic 850sx Control

Cincinnati Avenger

Details

Machine type CNC Lathe | Make Cincinnati | Model Avenger
Year 1994 | Control CNC Acramatic 850sx
Location USA
Term of delivery Immediately
Quotation ex. site

Technical details

Swing over Bed 23.54" | Swing over Cross slide 10.55"
Max turn diameter 10.39" | Distance between centers 20.79"
X-Axis travel 10.39" | Z-Axis travel 20.87"
Spindle motor (Main) 25 HP | Spindle motor (Sub) 10 HP
Spindle nose A2-6 | Bar capacity 2"
Spindle bore 3.15" | Spindle speed 5,000 RPM (Main & Sub)
Turret positions 12 Station turret (6 Live/6 Static)

To see more info and make a bid go to MMI AUCTION

FELLOWS 10-2 GEAR SHAPER

noreply@blogger.com (Contractor) — Sun, 22 Jan 2012 17:26:00 +0000

FELLOWS 10-2 GEAR SHAPER up for auction by MMI Auction

Details

PLC Control Gear Shaper
Located in: USA

New in TBA
PLC Control

Machine type PLC Control Gear Shaper
Make Fellows
Model 10-2
Year
Control PLC Control
Location USA
Term of delivery Immediately
Quotation ex. site
Technical details

Max Pitch diameter External & Internal 10"
Max diametrical pitch: Spur 4"
Max diametrical pitch: Helical 5"
Max face width 2"
Max helix angle (using 5" cutter) 45 degrees
Max OD of Fixture 19"
Spindle stroking speeds (Variable, 2 ranges) 105-630/ 210-1,260 Strokes Per Minute
Feed per stroke 001" - .040"
Number of cuts per cycle 1, 2 or 3
Wired for 460V, 3Phase, 60 Cycle
Weight (approximate) 12,000 LBS

Completely rebuilt by RP Machine, the table was take off and newly grounded. Spindle looks to be nice and clean, fresh seals, change gears are clean as new. All of the electirical and mechanical are in excellent shape. .

Go to MMI Auction to make a bid

Public Auction FOr Manko Window Sytems

noreply@blogger.com (Contractor) — Fri, 20 Jan 2012 18:51:00 +0000

PUBLIC AUCTION
Tuesday, January 31, @ 10:00 A.M. CST
WEB-CAST (ONLINE) ONLY AUCTION
Conducted / Managed by Stuart B. Millner & Associates
________________________________________
MANKO WINDOW SYSTEMS INC.
Assets Surplus to the Ongoing Needs
800 Hayes Drive, Manhattan, KS 66502

Examples of used equipment up for sale include

TENON-IGE ELITE - MANUAL P.I.B. (ROTATOR)
TYPE: EK-2000. S/N: 1ET2500/12 005. YEAR 2007. COMPRESSOR: 8-BAR. POWER: AC380V, 3-PHASE, 50HZ, 3.75KW

WEGOMA - 4 POINT VINYL WELDER
TYPE: WSA-46-H. NR. 163 1995,
3~ 400/N V 16A 60/60HZ 11KW

On Tuesday, January 31, Stuart B. Millner & Associates (A World Leader in Asset Management), will conduct this Public Auction Online for Manko Window System Inc. in Manhattan, KS

BID LIVE ON LINE : THE DAY OF THE SALE at WWW.SBMAC.COM

Unused Crude Distillation Tower Auction

noreply@blogger.com (Contractor) — Wed, 18 Jan 2012 23:32:00 +0000

Used equipment Auction by Network International, Inc - Here is the list of equipment for the Unused Crude Distillation Tower Auction: 1/25/2012

447JP-1000

Vessel, Crude Distillation Tower, 216in x 160ft Tangent-to-Tangent, 67.8/-15psig @ 500/650/750F, 5/8in Shell Thickness, .125in Minimum Cladding Thickness: Bottom 67ft-6in - 317L Stainless Steel Clad, Top 92ft-6in - 410 Stainless Steel Clad, Mfr Felguera Caldereria Pesada, SA, Yr 2008, S/N 71.0982, ASME Code, NB #120, Est Wt: 717,000lbs (325,225kg), UNUSED, Qty 1

Complete Metalworking Machinery Business Liquidation

noreply@blogger.com (Contractor) — Tue, 17 Jan 2012 20:25:00 +0000

All items selling with no minimums and no reserves!
Online auction from Orbitbid.com featuring a selection of used metalworking machinery. The sale includes CNC machining centers, press brakes, punch presses, grinders, milling machines and much more...

Auction Date: Tuesday, January 17th at 8am EST
Location: 39374 Grand Avenue, North Branch, MINNESOTA 55056
Auction Type: Online
Equipment Highlights:
-Excel 1300N Vertical CNC Machining Center
-Okuma Howa CNC Vertical Machining Center
-Fadal 4020 CNC Vertical Machining Center
-Southwest Industries CNC Turning Center
-Accurpress 717512 175 Ton Press Brake
-Di-Arco 75-10 75 Ton Press Brake
-Minster 6 O.B.I Punch Press
-Wysong & Miles Co. 1452 Squaring Shear
-Heim Straight Side Punch Press
-Acer Ultima Vertical Milling Machine
-Southwest Industries CNC Vertical Bed Mill
-Tominaga YMZ RH-1225 Radial Drill Arm
-Clausing 2286 Drill Press
-Grob 4V-24 Vertical Band Saw
-Sunnen MBB1660 Precision Honing Machine
-Bridgeport 815 Surface Grinder
-(4) Boyar Schultz Surface Grinders
-KO Lee B923G Tool Cutter/Ginder
-Delta Rockwell 73-060 Pedestal Grinder
-Oliver Adrian 510 Drill Sharpener
-Kaltenbach Up-Acting Cold Saw
-Hardinge DV-59 2nd Operation Lathe
-Sajo PF-54 Horizontal Mill
-Web/Takisawa TSL-800 Deluxe Engine Lathe
And Much More...

This is an online only auction which gives you the chance to bid no matter where you are located.

For more information
Contact Details:
Orbitbid.com
Kurt Mingerink | Email: kmingerink@orbitbid.com | Phone: 1.616.893.4346

Used CNC Equipment Auction ends Jan 25th

noreply@blogger.com (Contractor) — Tue, 17 Jan 2012 12:51:00 +0000

Current Used CNC Equipment Auction ends Jan 25th -

FELLOWS 10-2 GEAR SHAPER - -PLC Control Gear Shaper

ERWIN JUNKER MODEL BUAJ 31 - 30 Degree Angle Approach Cylindrical Grinder
Located in: USA , New in 1997

HELLER RFK INTERNAL CRANKSHAFT MILL - CNC Internal Crankshaft Milling Machine
Located in: USA , New in 1984 , Uni-Pro NC-80R 6 Axis Control

many more CNC equipment - see entire listing at MMI Auction | The Premier Online Auction for CNC Machines

Power Plant Equipment Auction

noreply@blogger.com (Contractor) — Tue, 17 Jan 2012 02:27:00 +0000

Power Plant Equipment Auction February 2 2012 by Network International, Inc.,. Auctions are taking place at various sites in California USA

Used equipment up for sale includes:

Generator, Steam Turbine Driven, Brush Generator End: 15.8MW, 1800rpm, 13,800V, Turbine End: Dresser, Inlet 925psig@749DegF, Exhaust Pressure 235psig, 3600rpm, w/Lufkin Gear, Yr 2009, UNUSED, Qty 1

Pump, 2100gpm @ 506ft, 880psig MAWP, 380F Max, .867 Specific Gravity (Atmospheric Resid), Flowserve, Type DSTHF, 1780rpm, Size 8 X 17, 2 Stage, NPSHR 10.8ft, Yr 2008, w/Electric Motors, Siemens, 350hp, 1786rpm, 509S Frame, 2300V, 60Hz, 3ph, 1.0SF, Yr 2009, UNUSED, Qty 1

Transformer, Generator Step-Up, 12/16/20/22.4MVA, 55/65C Rise, Class ONAN/ONAF/ONAF, 3ph, 60Hz, HV 35,600V, GRD Y/20553.6V, LV 13,800V (Delta), 5.049% Impedance @ 12 MVA, Core & Windings 27,400#, Tank & Fittings 18,560#, Removable Rads 8,200, Liquid in Transformer 17,940# (2,500USgal), Liquid in Radiators 2,400# (335USgal), Built 07/2009 by Siemens, UNUSED, Qty 1

And many more items. good luck bidding

Assets Available Due to Plant Closing

noreply@blogger.com (Contractor) — Tue, 17 Jan 2012 00:52:00 +0000

Acme ASM, Furnaces, Mills, Washing Machines, and General Plant Support
Assets Available Due to Plant Closing

Site Location: 600 Defiance Ave, Hicksville, OH, 43526, United States

Auction closes from 2:00PM (CST) on Thursday, January 26, 2012
Viewing: Wednesday, January 25, 2012 from 9am - 4pm

Used Equipment Auction by APEX for complete inventory see auction listing here

Featured CNC Used Equipment And Machinery Auction

noreply@blogger.com (Contractor) — Tue, 15 Nov 2011 16:59:00 +0000

Current Featured CNC used equipment from MMI Auction website

HAAS VF-0

Current Bid: $ 4,000.00
Ends 15 Days, 4 Hours +

HAAS SUPER VF-2 SS

Current Bid: $ 17,100.00
Ends 15 Days, 4 Hours +

HAAS SUPER VF-2 SSYT

Current Bid: $ 28,200.00
Ends 15 Days, 4 Hours +

WARNER & SWASEY NO. 4 UNIVERSAL TURRET LATHE, M-4640

Current Bid: $ 1,250.00
Ends 15 Days, 3 Hours +

NIAGARA 150/172 TON STRAIGHT SIDE DOUBLE-CRANK AIR CLUTCH POWER PRESS

Current Bid: $ 5,500.00
Ends 15 Days, 4 Hours +

MONARCH 10EE LATHE

For More Info or to bid go to MMI Auction website

CNC Used Equipment Auction Online Starts Nov 30 2011

noreply@blogger.com (Contractor) — Tue, 15 Nov 2011 15:58:00 +0000

Latest online auctions from MMI - Machinery Marketing International - Used CNC equipment for sale

DOOSAN/DAEWOO DMV3016 LD

2006 - Fanuc Oi CNC

20 ATC, CT 40, 8000 RPM

419 cut hours! Aluminum only! Tooling!

TOSHIBA TUE-15

2001 - Fanuc 18TC

*High column machine! 59" Cut ht

12 atc, 2 tool holders, full enclosure, many more!

MONARCH 10EE LATHE

MITSUBISHI M-H4B

1998 - Mitsubishe 520 CNC

16" Pallets, 12,000 RPM, 40 ATC, CT 40

Chip conveyer, Coolant thru Spondle

For more info and to make a bid go to MMI Used Equipment Auction Website

Boiler Gas Fired, Super Heated, Rentech, Yr 2009, UNUSED For Sale

noreply@blogger.com (Contractor) — Mon, 14 Nov 2011 18:02:00 +0000

Network International is auctioning this lot below:

LOT ID

13651

DESCRIPTION

Boiler, 200,000#/hr, 950psig@700DegF, Gas Fired, Super Heated, Rentech, Yr 2009, UNUSED, Qty 2

LOCATION

Abilene, TX

LOT ITEMS

(Qty 2)

Boiler, 200,000#/hr, 950psig@700DegF, Gas Fired, Super Heated, Rentech, Yr 2009, UNUSED, SEE LOT DETAIL ATTACHMENT

LOT ATTACHMENTS

LOT DETAILS FOR 13651

BOILER DATA SHEETS

BOILER GENERAL ARRANGEMENT DRAWING

IMPORTANT LOT TERMS

Shipping Dimensions: 120in W x 570in L x 215in H Each

For more info go to Network International Auction Site

Anadarko Gas Plant Used Equipment Auction

noreply@blogger.com (Contractor) — Mon, 14 Nov 2011 15:21:00 +0000

Featuring:Anadarko Gas Plant – 1.9MMscfd H2S Treating, Refrigeration & Fractionation Facility in Midwest, WY

Network International is auctioning the following:
LOT ID

436AN-1005OT

DESCRIPTION

Plant, Gas, 1.9MMscfd, Compressors, Ariel, Knight, & Ingersoll Rand, Refrigeration, Process, Fractionation, Amine, Glycol, & Hot Oil Units, Flare System, Instrumentation, & Buildings, 1 Lot

Location

Midwest, WY

Lot Items

(1 Lot)

Plant, Gas, 1.9MMscfd, Compressors, Ariel, Knight, & Ingersoll Rand, Refrigeration, Process, Fractionation, Amine, Glycol, & Hot Oil Units, Flare System, Instrumentation, & Buildings, SEE LOT DETAILS ATTACHMENT

Lot Attachments

TERMS OF SALE - Anadarko Petroleum Corp

LOT DETAILS FOR 436AN-1005OT

PLOT DWG

PROCESS FLOW DIAG

LoCat Absorber

Important Lot Terms

Additional material being sold in the auction: 436AN-1004OT

Current Price:	$85,250 USD
	(Reserve not met)
	You Lead!
Time Left:	2d 7h 19m
Close Time:	11/16/2011 4:40:01 PM CST

Old Carco Kenosha Engine Plant Used Equipment Auction

noreply@blogger.com (Contractor) — Fri, 11 Nov 2011 14:31:00 +0000

By Order of the United States Bankruptcy Court, Old Carco Liquidation Trust:
Old Carco - Kenosha Engine Plant in Kenosha, WI
3-day Auction
Tuesday, Dec 6th to Thursday Dec 8th at 9am EST each day
FEATURING: Over 1.9 Million Sq Ft facility and approximately $1 Billion in replacement cost of complete 3.5L and 2.7L engine lines including block lines, cylinder head lines, connecting rod lines, crankshaft lines and camshaft lines, all includes large quantity of spare parts, 4.0L engine components, dust collectors, large toolroom and maintenance, large amount of inspection, facilities and support equipment and much more.

For more information and to bid go to Maynards Industries Auction Site

Refrigeration Equipment Company Used Equipment Auction

noreply@blogger.com (Contractor) — Thu, 10 Nov 2011 20:28:00 +0000

Refrigeration Equipment, Metal Fabricating Equipment, Tools
10AM - THURSDAY NOVEMBER 17, 2011
Preview 8-10, Thursday, November 17
Seattle Refrigeration (closing)
1057 S Director St
Seattle, WA 98108

USED EQUIPMENT FOR SALE INCLUDES:
MUBEA KBLO Universal ironworker w/dies, s/n: 131/13700/16
KALAMAZOO H9AWV horizontal band saw, s/n: 18297
OOYA RE1250 radial arm drill, 9” column, 67” arm, T-slot table
CONTINENTAL DP14-500 drill press
WALKER heavy duty drill press
HAMMOND double end pedestal grinder
10’ bending brake
CAROLINA 30 ton hydraulic press, s/n: 25762
RIDGID 535 pipe machine w/dies
RIDGID 300 power head
RAMS 24-28 Pittsburg machine
HOBART Mega Flex 650 RVS welder
(2) LINCOLN TM500/500 ac/dc welders w/ disconnect
HOBART 500 amp welder w/HOBART 70L wire feeder
MILLER 330A/BP ac/dc gas tungsten welder
LINDE VI-301 welder w/disconnect
(2) MILLER Dialarc 250 ac/dc welders
MILLER Blue Fire 180 portable gas fired welder/generator
KOIKE SANSO cutting torch
EZ KLEEN pressure washer
JET 1-ton hoist w/pendant controls, trolley
(3) KNAACK job boxes
(4) 20’ containers
NISSAN CHF03A35V 8000 lb HRT forklift,propane, s/n: CHF03-000520
Large assortment of MILWAUKEE BLACK &DECKER, SKIL, DEWALT & Others sawzalls,angle grinders, drills, rotohammers, portaband saw, MILWAUKEE mag drill; Plus: shop
equipment & tools, layout tables, hand tools, inspection equipment, RIDGID tripods, pipe
stands, lights, welding equipment & supplies, rod boxes, oxy acetylene equipment, portable
vacuum pump, jack stands, come-a-longs, slings, banding carts, ladders, flammables
cabinets, material racks, steel stock, more
Bid live or bid online
with MurphyLIVEFor more information go to www.murphyauction.com • Phone 425.486.1246

Salt Creek Gas Plant Used Equipment Open For Bidding

noreply@blogger.com (Contractor) — Thu, 10 Nov 2011 19:19:00 +0000

Salt Creek Gas Plant in Midwest, WyomingH2S Treating, Refrigeration and Fractionation Facility
www.Networkintl.com

The Salt Creek Gas Plant is open for bidding and will close next Wednesday in the November 15-16 Pipe & Equipment Auction.

The Plant is a 1.9mmscfd H2S treating, refrigeration and fractionation facility that was in service between 1989-2009.

Equipment includes:
2 Ariel, JGR-4, 3-Stage Compressors
17gpm Fractionation Tower
750,000btu Ethylene Glycol Reboiler
33gpm Amine Unit
Culligan Mark 89 RO System
Triethlene Glycol Acid Gas Dryer
1.89 mmscfd Flare System
(2) 30,000 gal LPG Storage Tanks (being sold as a separate lot)
Site visit and inspection are available by appointment only.

To arrange inspection, please contact:
Stacy J. Smith
SSmith@Networkintl.com
(713) 590-1405 Direct

Used CNC Machining Equipment LT Enterprises Auction

noreply@blogger.com (Contractor) — Mon, 07 Nov 2011 16:38:00 +0000

Maynard INdustries is the auctioneer for the bankruptcy auction of used equipment at LT Enterprises, Inc.
Wednesday, Nov 9th at 10am EST

Location :6500 Stockton Road | Fairfield, Ohio USA

FEATURING: State of the Art CNC Machining and Water Jet Cutting facility equipment as new as 2008 including Mazak Vortex 1400/160II 5-Axis bridge mill, Mazak Nexus 6800-II machining center, (3) Mori Seiki NL3000Y/1250 and NL3000MC/3000 CNC turning centers, Makino A81 machining center, Mazak VTC-300C and Mazak Nexus 510C-II machining centers, (5) Hardinge-Bridgeport CNC machining centers, (4) Omax 55100 and (2) Omax 80160 CNC water jets, Flow IFB-6012 and Calypso HH126 water jet, toolroom equipment, inspection equipment, mobile equipment and much more.

auction by maynards Industries - FOR MORE INFORMATION GO TO USED EQUIPMENT AUCTION SITE

Huge Sales on Military and Name Brand Generators For Sale

noreply@blogger.com (Contractor) — Sun, 06 Nov 2011 16:05:00 +0000

Are you looking for name brand, used or military generators and gensets. If so go to
Government Surplus Buying Opportunities and search "generators"

Current generators for sale include:

2 each Generators to include (1)Libby Welding Co Inc Mdl MEP-002A 5 KW 60 Hz diesel engine

Generator 80KW, manufactured by Kohler model 80R0ZJ8I, serial number 282106, 120/208 volt

Generator 500 KW, manufactured by Onan data plate not visible, powered by Cummins diesel

Diesel Generator Model MEP006A, On 2.5Ton M200A 2-Wheel trailer, 60KW/50-60Hz, Turbocharged 6cyl

Mil-spec mdl MEP701A, 3KW diesel generator set. 120/208V, 3 ph, 120v, 3ph, 240V, 1ph, 120V, 1ph

Government Surplus Buying Opportunities and search "generators"

noreply@blogger.com (Contractor) — Sat, 05 Nov 2011 18:09:00 +0000

Machinery & Equipment no longer needed in the continuing operations of STAHL
Stahl Hilco Industrial Online Auction
Well-Maintained Fabricating Equipment Featuring CNC Turret Punches, Brakes, Welders, Paint Lines

Friday - Tues, November 11th - 15th, 2011 - Assets in Cardington, Ohio

((3) Punches: Trumpf Trumatic TC500 CNC Punch (1993) 22-Ton, With Stopa Material Storage System; Trumpf Trumatic TC200 CNC Punch (1997) 22 Ton;
Strippit Super 30 30-Ton Fabricatorr
(5) Press Brakes: Cincinnati 400-Ton 14'; (3) Verson 120-Ton x 12', 14' & 60-Ton x 10'; D&K 55-Ton 12'; (4) With CNC Back Gauge; Assorted Press Brake Dies
CNC Panel Bender: RAS Type 67.4
Squaring Shear: Cincinnati 1412 3/16" X 12' Mechanical, F.O.P.B.G.
Presses: Rousselle 10SS80 100-Ton SSDC; Niagara 32-Ton & Bliss 22-Ton OBI
Paint Lines & Booths: (2) GFC Pass Thru Powder Coat & Dual Chamber Lines; Pass Thru Paint Line; Binks 12' 6" W x 25' L Paint Booth/Oven; (2) 14' 6" x 26' L and 12' x 19' 6" L Paint Booths; Wagner Powder Collector Filter System
Saws: Midwest Automation 4021 Beam Panel, Doringer Chop & Ellis Mitre Band
(2) Drill Presses: Solberga (1998) & Willis (1997) Single Spindle
(3) Air Compressors: (2) Atlas Copco 40-HP Rotary Screw (2006, 1999); Quincy 25-HP
(18) Single Girder Bridge Cranes: (4) Shaw Box 5-Ton & 2-Ton & Kone 3-Ton Top Running; Dearborn 5-Ton & (13) Shaw Box, Crane 1 Services & Acco To 2-Ton Under Hung; CM 10,000-Lb. Sheet Caddy
Lift Trucks: Yale 8000-Lb. & 5800-Lb. and Hyster 5000-Lb. LPG; Electric Tugger
(20) Welders: (16) Miller Wire (To 2000); (4) Federal 75-KVA & 50-KVA Press Type Spot
Misc. Equipment: Pallet Jacks, Dump Hoppers, Shop Fans, Portable Stairs, Paint Mixers, Electric Hoist

for more information, pictures, and used equipment list go to Stahl Hilco Industrial Online Auction

Used Restaurant Equipment and Office Furniture Auction

noreply@blogger.com (Contractor) — Sat, 05 Nov 2011 16:51:00 +0000

1) LIVE ONLY
New & Used Restaurant Equipment
1879 Vine Road Vineland, NJ 08361
Tuesday, November 15 @ 10:00 AM

2) LIVE ONLY
Office Furniture & Vehicles
2708 Commerce Way Philadelphia, Pa 19154
Wednesday, November 16 @ 10:00 AM

Other sales are being scheduled for December. Remember to check our website for updates

Brandt Wolf

Quaker City Auctioneers

2860 Memphis Street

Philadelphia, PA 19134

215-426-5300 office

215-426-6897 fax

www.quakercityauction.com

Control Boards from Former New Page Paper Mill

noreply@blogger.com (Contractor) — Sat, 05 Nov 2011 12:43:00 +0000

Bid Today ONLINE AUCTION 144 Control Boards
Control Boards from Former New Page Paper Mill
1101 Mill St., Niagara, WI USA

FINAL 5 DAYS, Bid Today on 144 Different Control Boards

Allen Bradley
Fanuc
GE
AB
Automatic Direct
ABB
Texas Instruments

PLC Direct

Much, Much More!

DATE: Bidding Ends Tuesday, Nov 08, 2011 (10:00 am CST)
INSP: By appointment, please call

For details and online auction information
or call Burdette Wilber at (314) 616-8422

SURPLUS EQUPMENT FROM THE ONGOING OPERATIONS OF B-B CHEMICAL

noreply@blogger.com (Contractor) — Fri, 21 Oct 2011 22:53:00 +0000

SURPLUS EQUPMENT FROM THE ONGOING OPERATIONS OF B-B CHEMICAL- Surplus Chemical & Packaging Equipment

FEATURES: DoAll 16" Band Saw, Ingersoll-Rand Air Compressor, Elgin 5 Head Filler, Domain Tube Filler, Horix 16 Head Filler, National 6 Head Filler, Horix 14 Head Filler, Horix Capper, Shanklin Shrink Tunnel

Click HERE for Equipment List & Photos

Live On-Site Auction

Begins: Thursday, November 03, 2011 at 10:00 AM CDT
Location: 9600 W Ogden Avenue, LaGrange, IL 60525

Inspection

Begins: Wednesday, November 02, 2011 at 9:00 AM CDT
Ends: Wednesday, November 02, 2011 at 4:00 PM CDT
Location: 9600 W Ogden Avenue, LaGrange, IL 60525

some of the used equipment for sale includes:

DoAll 16" Vertical Band Saw Model 1613-2 SN# 150-64426 c/w: blade welder
Index Vertical Milling Machine, 48" X 9" Tee Slot Power Table, 6" Vise
Vertical Welded Steel Storage Tank, 5' diameter X 10' high, with sight level gauge
Will-Flo CORP. Vertical Stainless steel jacketed mix tank, SN# 7997-2, 5' diameter X 5' high, c/w: Top entry mixer, dual filter, 6" diameter X 5' steel body, pneumatic diaphragm pump, explosion proof controls

to Bid go to Schneider Industries Auction Site