valve-wow!

Check Valves

noreply@blogger.com (amethyst) — Tue, 12 Jun 2007 00:51:00 +0000

Check Valves

High Performance Non-Slam Nozzle Check Valve for highest economical demands.
Technical data:

Unique design for lowest pressure losses
Soft and metallic sealing
DN 50 – 1500
ANSI class 150 to 4500
-257°C to 537°C
Operating pressures up to p=434 bar
Face-to-face dimension acc. to ASME B 16.10
Flanged and welded bodies

Standard materials:

Body: Ductile cast iron, cast steel, stainless steel, duplex steel
Disc: Stainless steel, duplex steel
Spring: Stainless steel, Inconel
Seals: Buna-N, Viton-B, PTFE, metal

Typical applications:

Hot steam
Hot water
Petro-chemical applications
Hot gas applications
LPG, LNG-systems
Process for which elastomers and plastomers are not sufficient

Check Valve

noreply@blogger.com (amethyst) — Thu, 31 May 2007 11:53:00 +0000

Check Valve

The non-return valves or check valves are used to block the reverse flow of oil or gas in a fluid power circuit. Additionally this valve may be used for pressure control or directional control. The check valve consists of a valve body with inlet and outlet ports and an internal movable member biased by the spring. The movable member can be a flapper or a plunger but most often in valves of hydraulic systems, it is a ball or poppet. They are built to provide free flow in one direction and a check in the other direction and prevent flow-back in hydraulic systems. Check valves are of several styles: swinging disc, ball, plunger, and poppet.

Check valves of the pilot-operated type are also popular. The connection at the bottom is connected to a remotely operated pilot valve, As in the ordinary check valve, free flow is permitted in one direction when the line pressure lifts the plunger thus opening the valve. The flow is checked in the opposite direction until pilot pressure is applied to the blind end of the plunger through the pilot connection. This causes the plunger to unseat the valve spool and oil is allowed to flow through the valve.

When system pressure at the check valve inlet port is high enough to overcome the biasing spring force on the poppet, the poppet is pushed off its seat allowing oil to flow through the valve. This is known as the check valve's free flow direction. When the fluid attempts reverse direction of flow, the spring pushes the poppet back on the seat to block flow through the valve. Check valves can be direct acting or pilot operated. A pilot operated version is used where the no-flow characteristic of the valve is desired only for a portion of the system cycle. A pilot operated check valve also allows free flow from its inlet port to its outlet port just as in an in-line check valve.

The design and construction of a check valve makes it one of the simplest fluid power components. Though simple, its use can make the system sophisticated. By application of check valves one can also design many sophisticated circuit diagrams where a constant flow can be maintained in both directions by using them in a bridge.

Pacific Valves

noreply@blogger.com (amethyst) — Wed, 30 May 2007 14:00:00 +0000

Pacific Pressure Seal Valves

Engineered for critical applications, Pacific Pressure Seal gate, globe and tilt-disc check valves are built to meet the requirements of ANSI B16.34. Typical uses of the Pressure Seal valve include fluid handling in oil and gas production facilities, flow control in power generating plants and process applications.

Gate Valves, Globe Valves, and Check Valves

Class 600 - Class 2500

Sizes 2" - 24"

Flanged ends, and Butt-Weld ends

Flexible Wedge Gate

Parallel Disc Gate

Y-Globe

Lift Check

Tilting Disc Check

ANSI B16.34

SWING CHECK

noreply@blogger.com (amethyst) — Wed, 30 May 2007 08:02:00 +0000

SWING CHECK (SINGLE DISC)

Swing Check shut off depends on gravity (weight of disc) and reverse flow. The pivot point of the swing check is outside the periphery of the disc and, the greater the head, the greater the possibility that the fluid will flow back through the valve before the disc can shut off. To effect complete shut off, the disc of a swing check valve must travel through a 90 angle arc to the valve seat, as shown in Fig. 1. Without resistance to slow the disc's downward thrust, and encouraged by reverse flow, the shut off results in slamming and damaging water hammer. Use caution applying this type check valve where velocities exceed 3 FPS reverse flow and 30 psi.

Steel Valves

noreply@blogger.com (amethyst) — Tue, 29 May 2007 01:14:00 +0000

Steel Valves

---Crane Cast Steel Valves

Crane is the leading manufacturer of cast steel, globe and check valves. Typical applications for Crane cast steel valves include flow control and fluid handling for refining, oil and gas production, pulp and paper, waste water treatment and chemical processing.

Gate Valves, Globe Valves and Check Valves

Class 150 - Class 600

Sizes 2" - 48"

Flanged ends and Butt-Weld ends

Bolted Bonnet and Pressure Seal Bonnet

Swing, Tilting Disc, Lift, and Stop Check

NACE and Special Trims (i.e., 316SS, Bronze, Monel)

API 600

Ball Valves

noreply@blogger.com (amethyst) — Mon, 28 May 2007 07:33:00 +0000

Stockham Ball Valves

Stockham ball valves have gained wide acceptance with specifying engineers and contractors for commercial and industrial applications. Accurate machining and strict testing procedures ensure each user the quality that is built into every Stockham product. Stockham ball valves are routinely specified at chemical plants, petroleum refineries, pulp and paper mills, and for commercial building and general industrial service across the United States and around the world.

Scope of Line:400 psi Bronze Ball Valves

Two-piece design
Available in sizes from 1/4-inch to 3-inches (depending on Figure No.)
Threaded or solder joint ends

600 psi Bronze Ball Valves
Two-piece design
Available in sizes from 1/4-inch to 4-inches (depending on Figure No.)
Threaded or solder joint ends

1500/2000 CWP Carbon Steel Ball Valves
One-piece design
Available in sizes from 1/2-inch to 2-inches
Threaded ends

1500/2000 CWP Carbon Steel and Stainless Steel Ball Valves
Two-piece design
Available in sizes from 1/4-inch to 2-inches
Threaded ends

Plug Valve

noreply@blogger.com (amethyst) — Fri, 25 May 2007 02:43:00 +0000

Plug Valve

Flange-Connection Lifting Plug Valve acc.to ANSI -129

Product DescriptionThe co has its ex-cellent mechanical processing equipment and modernized inspecion devices, the quality of its products are stable and credible to pass the ISO9001 international quality certificate, and obtained the qualified certificae awarde by National Mechanical Depart-mentlts also promising to API Approved Enterprises and CE Obtained Enterprises. Not only entitled the Excellent Products with New Science & Technology in Zhejiang Province are the ANSI type cutting sleeve rotating plug valves, but achie-ved the National Patent with patent no: 99227876.7, with many years quality certificate inspected by the county, provincial and national inspection departments.
Since establishment, the company has always innovated and created new products by science and technology to develop the quality products conforming to the standards of ISO, API&ANSI of America, BS of Britain, DIN of Germany, NF of French, JIS & JPI of Japan, GB&JB of China, Its main products are high temperature and high pressure gate Valve, globe valve, check valve, ball valve, plug valve, bellow globe valve, and plunger valve with inside nominas diameter of 1/2"-42"(DN15-DN1050), pressure lever of 150 LB-2500LB(1.0MPa-42.0MPa), and operating temperting temperature of -101~+680, The main materials of valve are A105. WCB304, 304, 304L, 316, 316L, 1Cr18Ni9Ti, 1Cr18-Ni12MO2Ti, etc. And can smelt and produce accrding to the clients special repuire-ments, The products are hot sold in all over the coutry and to over more than 10 coun Tries and areas, i.e. Mid-east, Southeast Asia, Europe and Unite States, widely used in the fieids of chemical industrial, fertilizer, metallurgy, pharmacy, electric power, as well as liquefied petroleum gas, etc, for complement valve of introducing equipment. The company will be in the consistent pursuit of the idea of "Quality Superior & Clients First"to Best service customers from anyplace with high quality and satisfying after-sale service.

Floated Ball Valves

noreply@blogger.com (amethyst) — Wed, 23 May 2007 13:40:00 +0000

Floated Ball Valves

Product DescriptionWe are ball valve manufacturer and supplier in China.We can supply a wide range of Mounted Ball Valve , Three Ball Valve, Regulating Ball Valve , Jacket Ball Valve , Orbital Ball Valve ,Inside Screw Ball Valve , Outside Screw Ball Valve ,Floated Ball Valves,etc. Product Name:Floated Ball Valves Place of Origin:China PN150~2500LB DN1/2~42" Material:WCB,LCB,SS304,SS316, Standard:API,DIN ect

Pacific Bolted Bonnet Valves

noreply@blogger.com (amethyst) — Wed, 23 May 2007 08:56:00 +0000

Pacific Bolted Bonnet Valves

Pacific has designed and manufactured gate, globe and check valves for over 60 years. Ranging in size from 1/2 to 42" and manufactured in a wide range of material choices, Pacific valves are uniquely suited to meet the exacting requirements of the refining, chemical processing and power generation industries.

Gate Valves, Globe Valves, and Check Valves

Class 150 - Class 1550

Sizes 1/2" - 42"

Flanged ends, Socket-Weld ends,and Threaded ends

Materials: WCB, LCB, WC6, WC9, Inconel, Monel,Alloy 20, Hastelloy, C%, CF8M, and others

Sulfuric Acid Service

Catofin Service

API 600 and API 602

DIN GLOBE VALVE

noreply@blogger.com (amethyst) — Tue, 22 May 2007 07:35:00 +0000

DIN GLOBE VALVE

Design and Manufacture:DIN3356
Face to Face Dimension:DIN 3202
End Flange Dimension:DIN 2501
Welding Ends Dimension:DIN 3239
Test:DIN3230、API 598
Size:DN15~DN600
Pressure:1.6Mpa~16Mpa

Solenoid Valve

noreply@blogger.com (amethyst) — Mon, 21 May 2007 07:18:00 +0000

2-Way Solenoid Valve Poppet Type - N/C

WHAT IS IT? This is a two-way, two-position, normally closed, poppet type Solenoid Valve. It has an anodized aluminum Body and all ferro-magnetic materials in the Solenoid Assembly are electroless nickel plated for corrosion protection. The Solenoid is threaded into the Body and secured with a locking type Set Screw. The Electrical Connector is a two-pin type per MS-3102A-12S-3P. The Valve has pressure

ratings of 800 psig operating, 1000 psig proof and 1500 psig burst. It will withstand and operate under 10 G's Loading along any axis. The Solenoid operates normally with 24 to 30 VDC and draws a maximum of .75 amps at 75 degrees F ambient temperature.

HOW DOES IT WORK? The Valve is spring and pressure-aided closed. By applying 24 to 30

VDC to the Coil, the Armature, which contains an elastomeric Poppet, is actuated against the spring, opening the fluid path. Opening or closing response is less than 30 ms. The Solenoid is rated for continuous duty and the Valve has a minimum service life of 100,000 cycles. This unit is designed to have very minimal internal leakage. There is no evidence of fluid leakage in 15 minutes with 800 psig applied to the inlet port and the outlet vented to atmosphere. Flow is the equivalent of a sharp-edge orifice of .060 diameter where Cd is .65.

HOW IS IT USED? Materials are compatible with aviation gasoline, kerosene, JP-4, JP-5 and alcohol. The system has a temperature tolerance range from -65 degrees to +165 degrees F. The Valve has application in air, fuel and liquid cooling systems. With alternate elastomeric seals and poppet materials, it is also compatible with standard and synthetic hydraulic fluids. The unit is small and light-weight at 7 ounces. The unit pictured is used as a fuel tank transfer valve and fuel line blowdown valve on several small business aircraft.

Solenoid Valves

noreply@blogger.com (amethyst) — Mon, 21 May 2007 01:19:00 +0000

Solenoid Valves

INTRO:Solenoid Valves

Detailed Product Description 1) Adopts integral slot throttle structure
2) Structure type: guiding valve type
3) Material: aluminum, stainless steel, nitric rubber
4) Temperature: 0 - 80°C
5) Working pressure: 0 - 1MPa
6) Voltage: DC 24V, AC 24V / 110V / 220V (50 / 60Hz)
7) Level of protection: IP54
8) Valve hole is processed with special high precision finishing
technique
9) Widely applied to pneumatic systems

Pacific Valves

noreply@blogger.com (amethyst) — Sun, 20 May 2007 15:15:00 +0000

Pacific HF Acid Valves

As the leading manufacturer of Hydrofluoric Acid valves, Pacific is the only HF Acid valve producer who is approved by all the major licensers in all sizes and pressure ranges. Built under our ISO 9001 quality program, Pacific HF Acid gate, globe and check valves are available from 1/2 to 30" and meet the exacting requirements of API 600 and 602.

Gate Valves, Globe Valves, and Valves Check
Class 150 - Class 800
Sizes 1/2" - 30"
Solid Monel with Monel Trim
High Integrity Shut-Off Option
Monel Bonnet Sleeve
WCB with Monel Material
API 600 and API 602

High Performance Butterfly Valves

noreply@blogger.com (amethyst) — Sat, 19 May 2007 05:07:00 +0000

High Performance Butterfly Valves

High Performance Butterfly Valves

Class 150 - 600

Sizes 2" - 48"

Wafer and Lug Body Style

Soft seated; Zero leakage

Metal seated; ANSI Class IV leakage

Fire safe, meets API 607, Rev. 4

Automated Valves; Pneumatic, Electric, Hydraulic

Globe Valve

noreply@blogger.com (amethyst) — Fri, 18 May 2007 14:45:00 +0000

Globe ValveIntro:
Globe Valves are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service. Globe valves consist of the following moving parts – the disk, the valve stem, and the handwheel. The stem connects the handwheel and the disk. It is threaded and fits into the threads in the valve bonnet. The location of the valve disk in relation to the valve seat allows or restricts flow. The direction of fluid flow through the valve changes several times, which increases the pressure drop across the valve. In most cases, globe valves are installed with the stem vertical and the higher-pressure fluid stream connected to the pipe side above the disk, which helps to maintain a tight seal when the valve is fully closed.

Ball Valve

noreply@blogger.com (amethyst) — Fri, 18 May 2007 14:37:00 +0000

Ball Valve

Intro:
ball valves are the three different types of rotary valves used in industrial plants. They are widely used in fluid-handling systems for flow control. These types of rotary valves are suitable for corrosive applications. They are used in detergent, pharmaceutical, chemical, rubber, pulp and paper plants, water treatment systems, textile mills and food processing plants, In general, ball valves offer many advantages when contrasted with other valve types.
They provide superior ease of operation and can maintain and regulate high volume, high pressure and high temperature flow.
Most ball valves offer rugged construction providing for a long service life, and a comparably low cost. Additionally, the design of the regulating element allows the valve to function without the complications of side loads, typical of butterfly or globe valves, and the valve design permits inspection and repair of seats and seals without removing the valves’ body from the line.

Gate Valve

noreply@blogger.com (amethyst) — Fri, 18 May 2007 14:33:00 +0000

Gate Valve

Intro:

Gate Valves are advantageous in applications involving slurries, as their “gates” can cut right through the slurry. They are also used in applications that involve viscous liquids such as heavy oils, light grease, varnish, molasses, honey, cream and other non-flammable viscous liquids. They are available in large sizes to better handle thick flow. However, gate valves do have low-pressure limitations, and are not optimal in applications that require cleanliness or sanitary conditions. They are excellent for use anywhere a shutoff valve is needed. They can also be used where throttling capabilities are desired, although this is not generally recommended as erosion of the seat and disc occurs due to the vibrations of the disk in throttling applications.

plug valve

noreply@blogger.com (amethyst) — Fri, 18 May 2007 03:22:00 +0000

sleeve type soft sealing plug valve

SLEEVE TYPE SOFT SEALING PLUG VALVE

Main structural features:

Bolt cover,plug 90 degree around.Its sealing is realized by the sealing face around the sleeve.It has unique 360 degree metal edge for protection and fixing of the sleeve.There is no cavity in the valve for accumulation of medium.Metal edge provides the function of self-cleaning when the plug is rotated,applicable to the operation condition thatis glutinous and apt to smudge.Double direction.

TRIPE ECCENTRIC BUTTERFLY VALVE

noreply@blogger.com (amethyst) — Fri, 18 May 2007 03:18:00 +0000

TRIPE ECCENTRIC BUTTERFLY VALVE

TRIPE ECCENTRIC BUTTERFLY VALVE :

Three-dimensional incline taper airproof seat 900 openinger cleaningTriple eccentric,Bereled wedgedisc small friction and torque,self-cleanManual,electric,pneumatit and gear operation etc.A216WCB,A351 CF8,A351CF8MA217LCB,A351 CF3,A351CF3M

Technical requirements:
1.Design and manufacture comply to MSS SP 67-1997
2.Inspect and test comply to API 598
3.Face to face dimetion complies to BSS5155
4.Flanges comply to API 605
5.Pressure-remperature grade complies to ANSI B6.34

Plug valve

noreply@blogger.com (amethyst) — Fri, 18 May 2007 03:03:00 +0000

Plug valve

Plug valve also called cock or stop-cock valves, date back to ancient times, where they were developed for use in citywide Roman plumbing systems. Today, they remain one of the most widely used valves for both on/off and throttling services. Their design is fairly simple; the body is comprised of three main parts: body, cover and plug. The plug is a cylindrical, tapered, or generally cone-shaped device that can be raised or lowered within the seat to maintain, restrict or completely shut off flow. The valve is opened by rotation, with the plug itself being the only element that is capable of movement. Early models of plug valves used metal-to-metal seals that were nonlubricated. This design is still used, but problems with galling and sticking limit their usefulness. The use of lubricant between the plug face and the seat eliminates most of these problems. The lubricant helps to control leakage around the plug, reduces wear between the valve contact surfaces, and slightly lifts the plug to reduce the operating torque required to operate the valve. We are one of the biggest Plug Valves manufacturer in China.

Butterfly valve

noreply@blogger.com (amethyst) — Thu, 17 May 2007 02:46:00 +0000

Butterfly valve

Butterfly valve may include a pressure-tight resilient seat and an angularly offset disc. Butterfly valve designs use a hard seat and an O-ring or piston ring around the disk to seal. Butterfly valves range in size from small to enormous, and are well suited for large flows of gases, liquids, or slurries, offer a number of advantages when used for the proper application. They may be used in a wide variety of chemical services, they are available with small dimensions allowing for use in areas where space is limited, and they allow a high coefficient of flow. Conversely, the design of butterfly valve creates the disadvantage of not being easy to clean, and therefore should be avoided in situations that call for sterile, medical or food processing applications. Additionally, some styles may have difficulty dispensing slurries.

Check Valve

noreply@blogger.com (amethyst) — Tue, 15 May 2007 06:32:00 +0000

Check Valve

Check valves are generally used in drip irrigation emitters and irrigation sprinklers. Composition disc valves are ideal for applications involving gritty liquids.
A clapper valve is a type of check valve which is used in fire fighting. Poppet check valves find use in “macro” flow applications. Arterial check valves are used in applications requiring centrifugal pumps to prevent retrograde flow along the arterial line. Check valves are mechanical valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed. The mechanics of check valve operation are not complicated.
Most check valves contain a ball that sits freely above the seat, which has only one through hole. The ball has a slightly larger diameter than that of the through hole. When the pressure behind the seat exceeds that above the ball, liquid is allowed to flow through the valve. But once the pressure above the ball exceeds the pressure below the seat, the ball returns to rest in the seat, forming a seal that prevents backflow.

E-Type Gate Valve

noreply@blogger.com (amethyst) — Wed, 09 May 2007 13:59:00 +0000

E-Type Gate Valve

The E-Type Gate Valve is available with hydraulic action. Valves supplied with spring return fail-safe, open or closed, as well as double acting cylinders are readily available from stock

E-Type FSC and FSO

E-Type gate valves fitted with hydraulic fail safe spring return actuators are designated FSC for fail safe closed and FSO for fail safe open. They offer a flexible solution to surface safety and fail safe valve applications. The E-type FS actuated gate valves have the following features

Linear hydraulic single acting spring return
Normal operating pressure of 3,000psi
Translating hydraulic cylinder
Compact design
Hard-chrome plated cylinder
T-slot connection between stem and gate
Multi-lipped pressure and spring energized stem seals
Fully weather sealed
Automatic backseating - fire resistant
Twin guide bearings for stem
Pressure relief port above valve stem packing
No drift adjustment required to set stroke
NACE compatible for line pressure actuation

Options:

Safety head device fitted to prevent damage to valve or actuator
Quick exhaust pilot operated system
Pilot operated control systems
Hydraulic power packs and control systems
Position Indicators
Wire line shear fail safe trim

E-Type DA and DAO
E-Type gate valves fitted with double acting hydraulic actuators are designated DA for double acting and DAO for double acting with manual override. The E-Type double acting gate valves have the following standard features:

Linear hydraulic double acting
Normal operating pressure of 1,500 psi
Compact design
Robust construction
Double hydraulic seals and guides fitted to piston
Fully weather sealed
Simple construction with minimum number of components

Options:
Manual override. (DAO type)
Hydraulic power packs and systems
Position indication

Outline of ball valve

noreply@blogger.com (amethyst) — Sat, 28 Apr 2007 08:31:00 +0000

Outline of ball valve

■Application
Floating ball valves are suitable for use on various kinds of pipelines of Class 150 to Class 1500, PN16 to PN100, and JIS 10K to JIS 20K to turn on or off the pipeline medium, of which the operation types include manual, worm gear and pneumatic or electric actuators.
■Construction and features
ζ Reliable seat seal ζ Fire safe design ζ Reliable stem seal ζ Anti-static feature ζ Wrong operation prevention ζ Mounting pad provided
■Standards and specification
ζ Design & manufacture:API 6D、API 608、ASME B16.34、ANSI／AWWA C507、MSS SP-72、BS 5351、BS 6364、BFCI 70-2、ISO 5211、NACE MR0175 . ζ Connection ends:ASME B16.5、ASME B16.47、API 605、MSS SP-44、ISO 7005-1、JIS B2238、BS 12627、ASME B16.25、ASME B16.11、BS 12760 . ζ Face to face dimension：ASME B16.10、ISO 5752、BS 558、BS 12982 ζ Testing & inspection：API 598、API 6D、API 607、API 6FA、BS 6755、BS 12569、MSS SP-82、MSS SP-61
ζ Normal pressure or rating：Class 150 ～ Class 2500、JIS 10K ～ 20K、PN 10 ～ PN 420 ζ Normal diameter or bore：NPS1/2～NPS10、DN15～DN250 ζ Applicable temperature：-196℃～540℃ ζ Operation type：Manual, worm gear, pneumatic, electric
■Construction and features of floating ball valve
ζ Reliable seat seal
The structure design of elastic sealing ring has been adopted for floating ball valves. This seat design features a bigger sealing pressure ratio between the ring surface and the ball when medium pressure gets lower, where the contacting area is smaller. Thus, the reliable seal is ensured. When the medium pressure gets higher, the contacting area between seat ring and ball becomes bigger as the sealing ring transforms elastically to undertake the bigger force pushed by the medium without any damage.
ζ Fire safe design

With the valve heated in a fire application, the non-metal material parts such as seat sealing ring of PTFE, stem back seat gasket, gland packing, and the sealing gasket between body and bonnet might disintegrate or be damaged due to high temperature. CHAODA’s specially designed structure of auxiliary metal to metal seal is provided to effectively prevent both internal and external leakage of the valve. As required by customers, CHAODA’s floating ball valves with fire safe design can meet the requirement of API 607, API 6FA, BS 6755 and JB/T 6899.

More information click the follow website.

http://valve-wow.blogspot.com