Veg Gear DIY WVO Conversions and Green Energy

Please join my blog by clicking the "follow" button at the top of the screen if you enjoy this information

2020-08-10T13:22:00.005-04:00

You can also follow me on Associated Content where my articles are published. By following me on these sites you will be updated whenever I make a new post.
Thank you

My blog is now growing. Please click the Older Posts links to view my other articles.

Disclaimer: Don't blame me if you build or modify something and get hurt or cause damage. You have the tool in your hand, not me. I'm just sharing some projects that I have made. I'm not telling you or teaching you to do anything. If you hurt yourself don't call me. Don't do something that you don't know how to do.

LAUGH ABOUT IT...

DO SOMETHING ABOUT IT!!

The Daily Show - An Energy-Independent Future
Tags: Daily Show Full Episodes,Political Humor & Satire Blog,The Daily Show on Facebook

About me

2020-04-24T22:45:00.004-04:00

Several years ago I read about someone driving a bus that was burning used cooking oil for fuel. The article didn't say anything about how to do it, but it mentioned a book called From the Fryer to the Fuel Tank. I purchased the book after searching the web and finding nothing. I had several years experience working as a mechanic for the National Guard and I had a hard time believing what I was reading.

I already owned an old Chevy truck with a 6.2 engine and dual tanks. Converting the truck was fairly easy, but there wasn't much information on collecting and filtering all of the wvo. I drove the truck for about a year and burned a couple hundred gallons of grease. The truck was rusting apart and the front end needed all new rod ends. I parted it out and forgot about burning grease.

Years later I stumbled across a yahoo group that was putting VW diesel into Samurais and sidekicks. Someone posted a link to the biodiesel infopop site and the rest is history. The systems were now very different. They were using flat plate heat exchangers, two valves, two filters etc. I built my Geo Tracker in 2005. Since then I have converted 3 MB's 1 Chevy P/U and 1 Ford P/U.

I never even thought about buying a conversion kit. I like building things myself and much as I hate to pay to have things done for me. I read a lot of

Dana's http://vegoilconversions.netfirms.com/

Brian Miller's http://veggieburner.blogspot.com/

and other's posts. The home-brew parts that guys were building looked like it would work just as good as store bought. I started shopping for the raw materials to make the parts I wanted to install. I had to buy most of it in bulk. I was stuck with much more than I needed, so I sold a few parts here and there on the forums and Ebay.

This is a hobby that I enjoy. I want a place to share what I have learned and offer affordable parts. I will post how-to's for all the parts and sell parts to people who would rather buy than build. Just contact me by email. If you feel more comfortable you can go through Ebay.
http://shop.ebay.com/merchant/btpd3065_W0QQ_nkwZQQ_armrsZ1QQ_fromZQQ_mdoZ

Here's a few good forums:

http://biodiesel.infopop.cc/eve/forums/a/frm/f/159605551

http://www.greasecar.com/forum.cfm

http://www.frybrid.com/forum/

There are more, but if you are new this should get you started.

Parts for Sale

2020-04-23T14:21:00.007-04:00

Prices include shipping inside the USA. Just email me if you want to pay with paypal or a US Postal MO. There are too many fake MO's and checks out there for me to take anything else. Details and pics are on ebay, but I can sell them a little cheaper here because I don't have to pay the fees to paypal and ebay.
http://shop.ebay.com/btpd3065/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p4340

SBC WVO Gear Pump $65

Universal Injector Line Heater $20

Injector Line Heater w/ jumpers for 4, 5 or 6 cylinder engines $25

Injector Line Heater for 8 cylinder engines $45

100 watt inline fuel line heater ( 5/16" or 3/8" ) $ 30

200 watt inline fuel line heater (5/16" or 3/8") $40

200 watt fuel filter heater kit $ 33

Resistance wire heater kit (inc. 10' heater wire, 10' of insulation and 150" of high temp tape)$25

Adjustable thermostat 135-175F $20

Coolant heated Filter(filter head w/ 3/4 npt outlets, filter and aluminum coil) $40

Modified Small Block Chevy Pump

2020-04-22T21:51:00.001-04:00

Here is how to make your own waste oil gear pump.
This article has several photos attached. Click the link to the article then click the icon in the top left corner of the photo.

http://www.associatedcontent.com/article/1678496/alternative_fuel_waste_vegetable_oil.html

Off Topic, But a Money Saver

2020-04-01T01:07:00.007-04:00

How to Service a Window Air Conditioner Unit - Associated Content

This what a coil looks like when the unit is operated without a filter. You can see large scraps of silver tape that have been sucked through the system and lodged on the coil.

How to perform some basic service to your hvac system.

http://www.associatedcontent.com/article/1686776/diy_fixes_before_calling_the_heating.html

How to fix an air conditioner freeze up. How to clean a coil.

http://webmail.associatedcontent.com/c.html?rtr=on&s=mgs,5zp7,faq,ftfu,6e0e,31s2,hzux&ac_url=www.associatedcontent.com%2Farticle%2F1693972%2Fhow_to_service_and_clean_your_air_conditioning.html

Micro VAWT

2010-12-17T09:33:00.000-05:00

An unfinished, maybe never project:

This is something I fooled around with for a little while. Now it's been collecting dust for years. It's all junk that was laying around the garage, an old blower, a bicycle hub, some big washers, a pvc plumbing fitting and a small motor.

It can produce a little power, but it needs a way to make the power useable, like charging a car battery. Heck, I'll be happy with charging AA batteries.

DIY Cheap Black Berkey Water Filter

2010-12-16T13:49:00.002-05:00

How to Build a DIY Water Filter with a Black Berkey Filter Element for $70

DIY Soot Vac / Dust trap

2010-12-16T13:46:00.003-05:00

How to Build a DIY Soot and Dust Trap for a Shop Vacuum Cleaner

Cleaning a Tarm Dual Fuel Wood Gasifier Boiler

2010-12-16T13:39:00.003-05:00

How to Clean and Service a Tarm Dual Fuel Wood Gasifier / Heating Oil Boiler

Choosing an Air Compressor for a Waste Oil Burner

2010-12-16T13:33:00.002-05:00

Selecting an Air Compressor (from Free to Expensive) for a Waste Oil Syphon Burner

Building a Waste Oil Syphon Burner from a CKBurner Kit

2010-12-16T13:29:00.002-05:00

Converting a Home Heating Oil Burner to a Syphon Waste Oil Burner

Waste Oil Syphon Burner

2010-12-06T12:47:00.001-05:00

Coming soon

More spring cleaning: 35 spline dana 60 axle stubs spicer locking hubs spyder high steer arms

2010-11-06T15:50:00.020-04:00

I would to make a cash deal in person for the bigger parts. Some of them are heavy and require expensive shipping. The smaller ones can easily be shipped in a flat rate postal box. I will only take a US Postal Service money order or paypal IF the payment is from your account not a credit card or bank transfer because paypal charges a fee for those services. Please contact me if you have any questions NJ_M715atNETZERO.NET Thank you

chevy dodge dana 60 used rotor $55
factory spicer ford dana 60 locking hubs broached to fit 35 spline outer axle stubs $ 270
35 spline drive flanges / cogs with covers $170

Building a Constant Level (CL) Tank for a Syphon Waste Oil Burner

2010-10-22T18:00:00.003-04:00

How to Build a Constant Level (CL) Tank for a Waste Oil Syphon Burner

be sure to see all 5 pic with this article

vending candy soda snack machines for sale

2010-09-02T22:28:00.015-04:00

I also have some 3 selection bulk candy / gum machines $125 ea. SOLD

a small 6 selection soda machine with spare soda rack and coin mech. $170

a vendo 8 selection machine on a location $720 SOLD

I have to sell these off because of a back injury. These are listed on ebay and craigslist in south jersey and philly pa I am willing to accept all fair offers, but I will not be giveing anything away. I can be reached at nj_m715(at)netzero(dot)net

How to Make a Wick Type Alcohol Soda Can Stove

2010-08-25T13:11:00.001-04:00

How to Make a Light Weight Alcohol Stove for Hiking or Camping

Modify a Portable Torpedo Heater to Burn Waste Oil

2010-08-25T13:09:00.002-04:00

DIY Waste Vegetable Oil / Waste Motor Oil Conversion for an Oil Fired " Torpedo " Space Heater

Installing a Shallow Well by hand

2010-08-12T02:23:00.003-04:00

How to Install a Shallow Well Yourself
Give yourself a back up water supply, drive a well.

DIY Waste Vegetable Oil,Waste Motor Oil Heater Have Free Heat, well almost free.

2010-08-03T22:33:00.006-04:00

How to Convert an Oil Heater to Burn Waste Vegetable Oil WVO or Waste Motor Oil WMO
This is a standard heating oil burner that was modified to run on waste oil.

Adding a Second "House" Battery to a vehicle or RV

2010-07-30T01:23:00.002-04:00

Installing a Second House Battery in a Camper, Van or RV Bus Conversion

Building a Gravity Fed Rain Water Collection "Water Tower"

2010-07-30T01:20:00.003-04:00

DIY Gravity Feed " Water Tower " Rain Collection System for Off Grid or Home Use

1989 F250 with Class III front hitch

2010-07-28T23:02:00.004-04:00

This hitch is mounted on the front of my 1989 F250. It was welded with my on board alternator welder conversion. It's made from square steel tubing and a store bought receiver that is gusseted with 1/2 plates. It is secured to the frame with two 5/8" hardened bolts. It's main purpose is to add accessories like cooler or bike racks to the truck, but it is strong enough for my removable winch if needed.

Installing 12v solar panels on a camper or RV

2010-07-27T22:35:00.002-04:00

Installing Small Scale 12 Volt Solar Panels and Adding 110 Volt Power on a Camper or RV

Portable solar RV camping shower with 12 volt pump

2010-07-14T19:05:00.003-04:00

How to Make a Simple, Small-Scale DIY Solar Hot Water Heater

Let the sun's energy provide a hot shower while camping or living off grid

Build your own 12 volt onboard air compressor

2010-07-14T10:46:00.005-04:00

DIY 12 Volt On-board or Portable Air Compressor for $35