VirusGadget.com

Test post via android

2014-08-28T03:19:00.001-07:00

Perkembangan teknologi sekarang ini membuat kita semakin lebih mudah untuk melakukan segala sesuatu. Termasuk dalam hal ngeblog menjadi semakin mudah dengan adanya aplikasi blogger dari android. Aplikasi ini membuat para blogger bisa melakukan kegiatan bloging dimanapun mereka berada.

Postingan ini juga saya mencoba via android dan ternyata hasilnya memuaskan. Saya mencoba postingan dari perangkat ASUS Zenfone 4. Setelah download aplikasi blogger di android saya bisa langsung menggunakan aplikasi ini. Selamat mencoba.

How To Android Battery More Durable

2014-03-28T21:48:00.001-07:00

The durability of the battery becomes an important issue in the use of smartphones, including Android. Advanced smartphones become less stable if the batteries run out quickly.

With a large capacity increases, the battery in most Android phones now are more durable than previous generations. However, there are several ways to make this better.

Most of the tips to increase the battery performance of the following may be partly already known. But it does not hurt to listen for them again, as quoted from ZDNet.

1. Keep Cold Temperature Fixed Mobile

If the phone is exposed to hot temperatures, it is possible to weaken the battery durability and also more easily damaged.

Therefore, do not leave the phone exposed to excessive heat or direct sunlight. The battery will last longer if the phone is used at room temperature.

If you are outdoors , it is better if the phone is placed just inside the bag and not too much removed.

2. Lower brigthness Screen & Screen Timeout

This method seems to have been often presented, but still need to be confirmed again. The screen is the main component spends most battery life.

Therefore, it is important to lower the screen brightness level brigthness. This treatment will certainly increase the battery life.

Surely decreased levels need not be performed until brigthness in total. Lower until the rate at which the eye can still see the screen comfortably.

In addition brigthness level, setting the screen time out also noteworthy. This setting controls how long the screen will light up if no longer touched.

It's good to shorten the time the screen timeout. Screen will soon die if not used and extended battery life.

3. Use Power Saving Mode & Turn off Vibration

Most Android phones have a power saving mode that can be accessed in the settings. As the name implies, is intended to power saving mode to save battery usage.

If the power saving mode is activated, he will perform several techniques to conserve battery. For example, turn off the connection such as Wi-Fi or Bluetooth, and lower the screen brightness.

Power saving mode has a significant influence on the performance of the phone. So it is suggested that activate when the battery starts to weaken indicated.

Activate the vibration mode or vibration to alert the call or other notification is also quite thirsty battery. If not required, vibration modes should not be used.

4. Turn off Unnecessary Connections

Android phones are usually filled with connectivity. Including Wi-Fi, Bluetooth or GPS. The three lower the battery life is not small.

So if it is not used , it is worth only a third of these features turned off. For example, Bluetooth is used only for data transfer or while wearing a bluetooth headset.

And need only be activated if the GPS will seek direction. And Wi-Fi only turned on if it is in place certainly has a Wi-Fi signal .

5. Reduce the use of Flash & Wallpaper

The use of flash in camera takes a large enough battery life. Therefore, do not be too fun using it to extend battery power.

Likewise animated wallpapers. Indeed wear noticeably more animated cool wallpapers and more interesting than a static wallpaper.

But moving wallpaper mengahbiskan battery faster than a static wallpaper. Use only when needed, for this case may be just at the time wanted to display to friends.

6. Stop Searching for Signal

There are times when the smartphone users are in an area that is difficult signal. In this state, the phone still will be actively searching for a signal.

The signal search process consuming battery life is not small. So if it is not really needed, just switched off or moved into flight mode so that the search process is stopped signaling.

How to Save Contacts With a Blackberry Safe

2014-03-28T21:34:00.004-07:00

BlackBerry CEO Thorsten Heins has officially announced plans for the presence of the BlackBerry Messenger (BBM) for Android and iOS platforms, in mid- 2013.

Before it was released later does not hurt to iPhone and Android users begin to learn how to secure a BlackBerry Messenger contact. The main problem is that ordinary BBM contacts lost cause because the file is corrupt.

It tips the old , but still there are many who do not know how to back up and restore your BlackBerry Messenger contacts. Though it is very important to you are often mutually gadgets. Here's how.

First, use the BlackBerry Desktop Manager that can be downloaded for free at the official BlackBerry website. It is very easy, so activate the BlackBerry Desktop Software, then connect the gadget to the computer using a USB cable .

Then follow the instructions just select back up or restore. With the BlackBerry Desktop Manager not only BBM contacts that can be secured but overall BlackBerry data including images, videos, music and more.

Second, it could be done in a matter of seconds used directly on the BlackBerry. Log in to the BlackBerry Messenger, then to Options then search Back Up Management. There are two options, (i) Jerukers can save contacts on the MicroSD card or (ii) save it via email. The latter is much more secure because if it is damaged or missing MicroSD, automatic all come will be lost including BlackBerry Messenger contacts stored.

How to Prevent Android Becomes Slow

2014-03-26T22:40:00.001-07:00

The user's operating system smartphone with android current continues to increase. Increasing the number of users of Android phones as well as placing the most popular smart phone of any part of the world, including in Indonesia. With the development of the Android mobile phone products at low prices and supported by "seabreg" exciting applications offered to be one reason.

But in many cases it was found that users often complain of slow android phone connection on their phone, this can be caused by many things, among others, lack of attention and care as well as memory usage is too much. Therefore on this occasion will be discussed surefire tips to prevent Android slow.

Use the Kill Task Manager application

This application is useful to anticipate when there is damage to the application being run. Application that functions like the Windows Task Manager on Windows can be easily downloaded on Google Play Store. This application also includes a free application.

Reduce Application Not So Important

Use only an important application on your Android phone. Because if too many applications installed, the performance can decrease your android phone and loading process can also be long.

Close Medium applications are Used

Although Android provide services to be able to open multiple applications simultaneously, but it would be better if you close an application that is not in use.

Clear Cache

Use the eraser application cache, such as the Clean master. This cache will always increase when users browse or chat activity and a growing number of cache that accumulates can cause the phone to become slow. Therefore remove them is one good option.

Use the Lightweight Theme

Thame weight will usually take up a lot of RAM, so just use a light theme. By using a light theme, but can be slow to prevent the phone can also make the battery last longer.

If the phone is still slow, it is better immediately take it to a service or can also come to those who understand. Because sometimes there are some issues that are on your phone.

Tips on Choosing a Qualified The Cheap Android Smartphone

2014-03-26T22:24:00.004-07:00

As the development of such technologies in increasing today, where smartphones become accustomed. Almost all manufacturers of mobile communication devices, has released a smartphone. A wide variety of operating systems are now also growing to support the existence of this smartphone.

One of the operating system that is so well known in the community is Android. Smartphones with Android operating system is still the ruler of the market to date. Various types of Android smartphones with a variety of brands can be easily found with prices ranging from hundreds of thousands, millions, tens of millions.

With all the features and advantages are given only natural that everyone wants to have a smartphone with the Android OS. However, that is often the problem is when the desire to buy a smartphone of this kind are already high, while the budget that is owned not too much.

What's the solution? For those of you who have the problem not to worry too much, because many cheap Android smartphone products but not cheap. This means that even at an affordable price but has good specs .

The point prospective buyers to be selective and smart in choosing a smartphone that will be purchased. The following are some tips for choosing quality Android smartphone with limited funds.

1. Select a smartphone in accordance with the budget you have. In buying something, one thing is certain to be considered is the issue of money. Therefore, before buying try to find out the price range, so you can adjust with the budget you have.

2. Observe carefully specifications owned. One of the most important things in buying a smartphone is to know the specifics, so you need to look for more information in order to know what the pros and cons. You need to pay attention and mempertimbnagkan some things, such as processor that supports the way it works, RAM, memory capacity, camera, display type and quality, battrei power, speed connectivity, as well as other supporting features.

3. Select a smartphone that official warranty. In general, any product sold authorized sales place is equipped with a warranty, but even so you are obliged to ask for clarity about the warranty. In addition it should be taken into consideration is how long the product will get a warranty. Try to choose products that provide warranty service within a long time.

4. Select a smartphone from the manufacturer that provides the service center within your reach. It is meant when a problem occurs when unwanted or thing, you can easily go to the service center and ask for help.

The most important thing when choosing a smartphone is, adjust to your needs. Calculate ranging from usability, budget, and so forth. Because you certainly do not want not, if a waste of money if you do not need these gadgets?

How To Make An iPhone App

2014-03-26T22:09:00.003-07:00

Tendency to become an iPhone app developer has changed significantly. With nearly one billion of Apple products in the market, many developers are striving to become application developers to Apple. Markets experiencing stiff competition between Android and iPhone developers as demand for both of these things.

The number of iPhone users all over the world is increasing rapidly day by day and so is the demand for developers. Apple believes in providing the best experience to their customers through their app store which mainly involves offering error free. There are two types of applications available for the iPhone users, paid and free apps. Is a paid application that will charge some money before one can download on his cell phone while free app does not require payment and the user can install the application by simply visiting his preferences the Apple app store.

If you want to become an iPhone app developer you should be able to work hard. Being an iPhone developer can be very valuable for a promising career. If you are not a developer, it does not mean that you can not become one. If you have a small computer skills and want to become a developer, with the commitment and hard work you can achieve your goals.

Instruction

1. The most important step is to join the developer program (developer) iPhone. Remember that, without this you can never become an iPhone developer as this provides the necessary tools to build an iPhone application that is compatible. With the help of the developer program, you not only can design and test the application but add it in the iPhone store. You will be required to pay a registration fee before joining the program.

2. There are two programs offered for registration, the standard for an individual program and the Enterprise program is for businesses that employ more than 500 people. The developers are required to make applications for both the iPod and the iPhone.

3. Once registration is complete, you should start working on your application. If you want to create a simple iPhone application, you should take the help of the iPhone SDK. Make sure your application should be free of errors and has a rich user interface as a second appointment Apply this to their customers.

4. Once the application is built, you have to test and debug, and then add it to the app store.

Lenovo Vibe Z Challenge Galaxy S5

2014-03-25T11:20:00.003-07:00

Lenovo brings new phones are ready for battle in the premium class. Z Vibe is ready to compete against the Sony Xperia and Samsung Galaxy S5 Z2.

image by : inet.detik.com

Vibe Z is Lenovo's most advanced mobile phone in Indonesia. This product has a large screen of 5.5 inches with a resolution of 1920x720 span pixels.

About kitchen runway this product also looks a little closer to the innards of the Galaxy S5 or Xperia Z2. If both phones use the Snapdragon chip 801, the Z Vibe wearing Snapdragon 800 with 4 core 2.2 GHz processor.

In addition to the powerful kitchen runway, this phone is also claimed will make owners fascinated thanks to the design and features.

"Vibe Z has an elegant design , advanced features and interface are easy to understand," claims Agus Sugiharto, Director MIDH Business Head at City Kasablanka Lenovo Indonesia, Wednesday ( 25/03/2014 ).

Lenovo Vibe Z promised would be on sale starting this weekend with a price almost USD 6 million. But for those who can not wait, the user can pre -order online starting on March 28, 2014.

Especially for those who pre-order, the user will be offered a wide variety of bonuses, including cashback of IDR 500,000.

Killer Feature From Lenovo Mobile

2014-03-25T09:50:00.001-07:00

In addition to faster processors or brilliant screen quality, there are other features that are not less important but often forgotten by the manufacturer. That was then ogled Lenovo.

Mobile toned with some other advanced features will not be maximized without the support of adequate battery capacity. It could actually be bothered because users must continue to hunt plugs, or bringing the power of banks.

Lenovo is aware of it. They try to accommodate a number of product lines with large battery capacity, call it Z Vibe with 3,000 mAh battery.

Vibe Z itself is not Lenovo's first mobile phone that has a battery big, before they invest in the feature P780 series. And this phone is claimed to be selling well.

"We never advertise P780, but it was the best-selling mobile phones," claims Agus Sugiharto, Director MIDH Business Head Lenovo Indonesia.

Men's Harley enthusiasts it is also clear that the features which make the P780 is the best-selling large battery capacity of 4,000 mAh ie. Well, this is what will be their ability to continue to develop in the next product.

"This year our theme Endurance, mobile phones with exceptional battery life. We have prepared several products with a large battery, there is even a 6,000 mAh," Agus added Kasablanka City, Wednesday (25/03/2014).

Given typical Indonesian users who like to chat or bersosial media, Agus consider a phone with large battery capacity will be hunted.

Then when Lenovo will release phones with the large capacity battery?

How To Long-Lasting Mobile Phone Battery

2014-03-25T09:43:00.001-07:00

Many uses that can be made mobile. Not only do phone calls and texting, but also listen to music, surf, and play games. By default, the battery will definitely continue to decrease with the use of mobile phones. In fact, maybe you're just filling its few hours ago.

Mobile phone battery can actually last long enough if carefully around this. Which is quoted from the site, Friday, November 22, 2013, there are some immediate things that can help power the phone last longer. Here's the breakdown:

1. Do not Use Mobile Phone While Charging

Most people charge a cell phone battery charge overnight so that is always fully charged. In fact, Li-ion batteries have an internal circuit that can automatically stop the charging process if it is full. However overcharging could make a phone so hot. Also, do not use the phone while it is charging process. This can be confusing because the safety circuit must divide when charging and phone tasks.

2. Optimize Battery

We recommend charging the phone when it was approximately 40 percent and the rest of the contents back up to 80 percent. If the phone will be used actively, power battery charge between 40 to 80 percent will make the phone more optimal power.

3. Mobile Should Not Too Hot

Temperatures often rise when the phone is charging process berlangsusng. If it were so, the power battery charge becomes increasingly rapidly diminishing. Should remove the protector if the phone you are using. Additionally, do not leave the phone in the room is too hot or exposed to direct sunlight.

4. Effectively Using the Phone

If you do not use the phone for a while, save phone battery power around 40-50 percent in a cool place. After that, turn off your cell phone battery for power storage. This is an effective way to conserve battery power, especially in the office when you need to focus on the job.

Let's Talk About Galaxy S5

2014-03-04T07:43:00.002-08:00

"Progress of telecommunication technology not only gives a new meaning, but also can improve the quality of life."

Better quality of life not only measured in terms of a person's financial establishment. Because, one establishment of financial terms will not be separated from its activities and to meet each of these activities need a support. For example, when they need support fast connection so that each job can be resolved or health-related support to support the above activities. The current activity will automatically increase the financial stability and continued with increasing lifestyle. Such support can be obtained from anywhere, for example a smartphone.

Advances in communications technology available today makes the phone is worth mentioning as a smartphone. In addition to its main function as a communication tool, a worthy smartphone also referred to as the "principal supporter" of your move. For example just what the country of origin of ginseng company has just released the Samsung Galaxy S5 in Barcelona, Spain.

A JK Shin, President and Head of IT And Mobile Communications Divison Samsung opened a veil of what is required by the consumer of a smartphone. "Consumers are looking for a mobile device that is able to inspire and support their activities in conjunction with their efforts in improving lifestyle. GALAXY S5 reflect an iconic design products with important and useful features that focus in bringing advanced smartphones on the market today are in the inspiration of the consumer."

Inspired by the needs of consumers

Consumers, is the inspiration that led to the Samsung Galaxy S5 is able to bring the sophistication as a smartphone. The specifications mentioned that this smartphone is able to work in a network that is capable of flowing Cat. 4 LTE data up 150/50Mbps. Thus, the speed of data while surfing the internet run smoothly without interruption.

On Samsung Galaxy S5 also been supported by the Wi-Fi 802.11ac fifth generation and MIMO 2x2, so when looking for a fast connection Samsung Galaxy S5 is ready to support you plus the Download Booster features an innovative Wi-Fi technology to increase the speed of data using Wi-Fi and LTE simultaneously.

In order for the above network speeds can be facilitated, the Samsung Galaxy S5 was already ready to be run by a powerful 2.5GHz Quadcore processor and 2GB of memory so that any access that you do on the smartphone can run smoothly without a hiccup. And for the Samsung Galaxy S5 storage problems without additional storage cards are able to store data that you have thanks 16/32GB Internal Memory. Thus, all the photos you take from a 16MP camera (front) or 2.1MP (rear) Samsung Galaxy S5 already be stored directly.

When capturing precious moments with family or friends in the picture, you can also experience the sophistication of High Dynamic Range (HDR) which is able to reproduce the light and gaudy colors with high intensity in any condition, and the autofocus speed of the Samsung Galaxy S5 camera is capable of capturing objects in just 0.3 seconds. The other thing is, Samsung Galaxy S5 will make you a professional photographer tub with the Selective Focus feature that images with sharp parts in a single object. So, to create the effect of a shallow depth of field (DOF) simply press alone.

Else if you want to record the moment at the top in the form of video. You can create high-resolution video at speeds UHD @ 30fps and a rocking affair pictures can be minimized with video stabilization. Every video that you create can be formed in MP4, M4V, 3GP, 3G2, WMV, ASF, AVI, FLV, MKV, WebM. Or you can also watch the video with the screen size of the Samsung Galaxy S5 5.1 "Super AMOLED FHD (1920 x 1080), provided that there is a video in H.263, H.264 (AVC), MPEG4, VC-1, Sorenson Spark , MP43, WMV7, WMV8, VP8.

Samsung makes the Galaxy S5 part of the lifestyle

As the company's biggest gadgets, Samsung in addition to creating sophisticated devices that match the needs of consumers also never forget attach aesthetic value of each product. Clearly, the Samsung Galaxy S5 looks of this iconic with modern trends to attract consumer tastes different.

GALAXY S5 has a pattern with the illusion of a hole in the back cover that makes it look glamorous and modern. Sleek look, with a new contour shape and the colors are more vivid, like charcoal Black, White shimmery, electric Blue and Copper Gold.

In order for the Samsung Galaxy S5 still looks "gorgeous" do not forget Samsung also provide defense from dust and water on the outside of the product. As for the security of this smartphone can read sidk your fingers with finger scanner feature, or you can perform a biometric lock screen.

For the problem of battery life, the Samsung Galaxy S5 is equipped with a powerful 2800mAh battery (Standby time : 390 hrs/Talk time : 21 hrs) and is also equipped with the Ultra Power Saving Mode that will change the screen to black and white and close all unnecessary features so that more efficient battery consumption.

Samsung Galaxy S5 and Health

Well this is unique, every user of Samsung Galaxy S5 will be spoiled by Health 3.0 is an application that will help you stay fit and healthy. Samsung Galaxy S5 provides a comprehensive personal fitness tracker to help users monitor and maintain their daily activities also Samsung Galaxy S5 is equipped with additional devices including pedometers, dietary records and sports activities, as well as the latest device that is built-in heart rate monitor.

Samsung Galaxy S5 can also be paired with Samsung's newest gear fitness activities in order to assist in real-time. How, interested? You can view or even directly buy Samsung Galaxy S5 is through stores, e-commerce and all telecommunication operators starting in April. Full details can be seen in www.samsungmobilepress.com. Happy hunting new Samsung Galaxy S5.

This is Specs of the Galaxy S5 Samsung

2014-01-14T01:45:00.001-08:00

Flaghsip next Samsung smartphone, the Galaxy S5, will be released in April 2014. But unfortunately, some of the specifications of the phone is touted to be equipped with eye scanner is still kept secret by Samsung.

picture by : iptimes.co.uk

Fortunately, there is a latest leak from inside the Samsung. This leak confirms some specs and some of the main things of the Samsung Galaxy S5. The first is confirmation that Samsung will release Galaxy S5 in two variants, namely metal with a price of 800 Euros and will be appreciated that the plastic berbody 650 Euros.

Here are some other key specs leaked from Galaxy S5:

- Super AMOLED qHD resolution (2560x1440 pixels)
- Exynos Processor 6 / Snapdragon 805
- 16 megapixel camera
- Android 4.4 operating system KitKat

We look forward to his presence in April.

Lithium-Sulfur battery cells, the upcoming replacement for Lithium-Ion

2014-01-12T04:18:00.000-08:00

Lithium-ion batteries, the current battery technology used in smartphones, has a high specific energy (energy per weight) but has a few drawbacks. Let's take a closer look and compare both technologies.

The main issue with Li-ion is that is requires lithium dissolved in extremely volatile and flammable organic solvents; e.g. dimethoxyethane which has a low flash point -2 °C (28 °F), the temperature at which a volatile substance can evaporate and form an ignitable mixture in air. This makes them extremely dangerous when the charging circuits malfunction and fail to protect the battery from overcharging, and consequently overheating. We have seen some scary stories in the recent past with people waking up to their phone bursting into flames while they were charging overnight, and the battery fires in the new Boeing 787 Li-ion battery packs. So obviously there is need for development into a safer battery composition with similar or better energy capacities.

Recently I did some research into the developing Lithium-Sulfur battery, with extremely promising specifications at the present time better than Li-ion. Li-S is extremely light weight due to the use of sulfur instead of ionic liquids, additionally sulfur is much cheaper to produce than ionic liquids. Despite frequent headlines about new battery compositions with potentially high capacities, Li-S is actually in the production stages and no longer just a concept.

The chemistry behind Li-S is essentially the lithium gets plated onto the anode when charging and poly-sulfides are reduced and coat the anode when discharging, compared to the use of intercalated anode and cathode plates in Li-ion. This is the main factor which gives Li-S potential to be a battery composition with an extremely high specific energy. The different chemistry also allows the use of much less volatile solvents such as polyethylene glycols (flash point up to 287 °C/548 °F).

The degradation of Li-S is different to Li-ion but is also susceptible to an increased rate of degradation at high temperatures. There are unwanted side reactions that can take place, but are reversible until they dissolve into the solvent. Luckily sulfide compounds are relatively insoluble in electrolyte solutions but any increase in temperature will increase their solubility, so batteries need to be well regulated to prevent rapid charging and discharging.

Manufacturers are beginning to pour money into research and development for Li-S as there are a lot of factors which can be significantly improved, from something as simple milling smaller sulfur and carbon particles to something more difficult like developing a better solvent to improve battery capacity and reduce degradation. (Carbon nanotubes/nanofibres are used as a conductor due to sulfur’s poor electroconductivity, and they are still quite expensive to produce.)

I've put a graph at the top to compare rechargeable battery technology in the past with Li-S. Now, time to see which OEM will be implementing Li-S first.

TL;DR Lithium-Sulfur batteries are capable of having a higher wattage per weight than Lithium-ion whilst being both safer to the consumer and cheaper to manufacture.

Puncture test comparison

Short circuit test comparison

This article is also to be found on its author's personal blog.

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

What’s new in 2014 - a year of technology

2014-01-11T10:48:00.000-08:00

What’s new in 2014...

Have we reached the point of diminishing returns?

With 2013 now behind us, I want to look back upon the past year and analyse the technology we saw, as well as speculate upon what we are likely to see this year. I think 2013 was a relatively disappointing year for mobile phones, however 2014 looks more promising.

Displays of 2013

For many, 2013 will be known as ‘the year of 1080p screens’, as almost every flagship model incorporated these high resolution displays at the cost of battery life and overall fluidity. This meant that overall performance seemed stagnated in general operations, with the HTC One X rarely under performing to the HTC One, except in gaming performance.

However, the benefits of a 1080p screen as compared to a lower resolution are noticeable to most and definitely offer an improved experience, resulting in less eyestrain and the ability to browse the web more elegantly. Of course, not every 1080p screen is equal. We saw improvements in colour reproduction, brightness and touch sensitivity in 2013, as well as advancements in technologies like AMOLED. With Apple retaining it’s sub-720p display on the iPhone 5S, many agreed that this was subpar and that this will need to be improved upon in 2014, else market share will suffer. The Xperia Z was widely criticised for its poor viewing angles, resulting in poor sales despite otherwise quality hardware. This shows the great importance of a quality screen in the current market. Display size in 2013 saw a huge increase from previous years. In 2010 for instance, the display of the iPhone 4 at 3.5 inches was considered large. By 2011, the Galaxy S2 had upped this to a 4.2” screen, and in 2012 the Galaxy S3 was released with an even larger 4.8” screen. 2013 can be known as the ‘phablet year’, with a large number of phones released with a screen size larger than 5 inches. This is a trend on the rise and I believe that in 2014, any screen with a size less than 5” will be regarded as ‘small’.

Displays of 2014

In 2014, many smartphones are rumoured to be incorporating WQHD screens, with a resolution of 2560 x 1440. This is a resolution higher than most laptops on the market and seems to be overkill for a screen so small. The benefits of 1080p were visible, but with another resolution jump, the impacts on performance and battery life don't seem justified. A 1080p screen seems pin sharp and any higher may truly be more pixels than the eye can distinguish. This year in the television industry, there will be a major focus on OLED displays, due to their superior black levels, brighter whites and fast refresh rates. However, in the mobile industry I believe that LCD will still dominate, due to a cheaper cost and advancing technologies allowing for higher resolutions on a thinner screen. Only Samsung and Nokia are currently utilising OLED screens and while they are praised for their colour saturation and black levels, many argue that the colour is not reproduced accurately and that the Pentile matrix of Samsung’s latest screens means that they are not at true 1080p. OLED displays also commonly have a tint, resulting in darker, less pure whites. The S4 for instance has a clear blue/green tint when compared to the HTC One which uses an LCD. To conclude, I believe that in 2014, 1080p will be the standard resolution for most phones, with a few rising to 2560 x 1440. The benefits of this are yet to be determined. Screen sizes in 2014 will be 5” or above for flagship devices, with the Galaxy Note series increasing to around 5.9”.

Batteries of 2013

In any portable device, battery life is a major concern and in mobile phones, this has an even greater importance. Over the past few years, battery life hasn't really improved. This isn't due to the non advancement of battery technology, but more due to the increased power usage of components in phones, with the latest screens and SoCs using more power than they did a couple of years ago. This creates the illusion that the batteries used are exactly the same as those used in 2011, while really they are advancing at a steady pace. For example, the HTC Desire (was one of the highest rated phones of 2010) utilised a 1400 MaH battery, while the HTC One uses a 2300 MaH battery. With 900 MaH extra capacity, the HTC One should have greatly improved battery life, while in reality it is not much different. This is because of the more power hungry components. One anomaly in 2013 was the iPhone 5S, which uses a 1570 MaH battery. This is far lower than other flagship phones on the market yet still manages to provide a days usage. This is due to the less demanding processor, as well as software optimisation in the closed Apple ecosystem. The drawback of current batteries is that they are still too large. To include a large 3,200 MaH battery such as the one found in the Galaxy Note 3 requires… you guessed it, a phone the size of a Galaxy Note 3. This means that phones cannot continue to get much thinner with the current generation of batteries, else battery life will suffer.

Batteries of 2014

Phones released in 2014 will have a healthy bump in MaH as compared to 2013, however we shouldn't expect to see a noticeable difference in usage times, due to the impending release of WQHD displays and even beefier processors. I believe MaH will hover around the 3000 MaH range for flagships this year, with phablets potentially pushing towards the 4000 MaH mark. A day of solid usage can be expected. One thing that split opinions in 2013 was the issue of the removable battery. It was argued that it was required in order to switch batteries when the original had lost charge through age and that non-inclusion was a type of planned obsolescence. Others argued that many don’t keep a phone for longer than 2 years and that in this time, a battery would still maintain at least 75% of the original charge. Personally, I find a removable battery useless for my needs and think that the design changes required to incorporate one are detrimental to the looks of the phone. I would take a well built solid unibody phone over one with a removable flimsy back cover any-day. In fact, a removable battery just seems so old school, Nokia 3310 anyone? In 2014, unibody phones will be standard.

Cameras of 2013

In 2013, DSLR sales suffered. This was mainly due to the increasingly good picture quality on mobile phones. While professional photographers can’t sell their professional equipment yet, for many users a mobile phone camera is more than sufficient. Cameras in 2013 saw resolutions as high as 13 megapixels, while some manufacturers decided to go in the other direction: reducing the number pixels in return for better low light photos and less noise. There is split opinion on the effectiveness of this strategy. Personally I prefer the photos taken from the standard 8 megapixel HTC One X camera than those taken from a 4 megapixel HTC One, with 2um pixels (‘Ultrapixels’). The 13 megapixel camera of the Galaxy S4 can take some great shots, however colours are too processed and noise is an issue with such a small sensor. Overall, I think that the greatest camera of 2013 was that on the iPhone 5S, which features an 8 megapixel shooter with larger pixels like seen on the HTC One. This allows for good sharpness while also reducing noise. Mobile phone cameras now have a number of quality features that even DSLRs can’t match, such as high quality slow motion video, 4K video recording and options to remove unwanted objects from an image with a simple tap. Shooting speeds also dramatically increased from 2012, with speeds of up to 10 photos per second.

Cameras of 2014

I think that this larger pixel technology will be seen more often in 2014, with HTC and Apple likely to continue the trend. However, I wouldn’t expect to see Samsung attempt this. In fact, a 16 megapixel camera on the Galaxy S5 wouldn't surprise me. HTC will likely release an 8 megapixel ultrapixel camera, while Apple could either remain at 8 megapixel or jump to 13. Expect to see an improvement in editing options this year, as well as the rise of 4K video. Optical image stabilisation will also be included in most of the flagship devices, as this removes camera shake from photos, meaning that photos taken with a non steady hand or on the move won’t be blurred.

An 8MP camera with 2um pixels will require a phone to be 18mm thick at the camera site; not sure if any manufacturer will go there. Check out this article for more details - Cameras in Phones - what do we really need?

Processors of 2013

Qualcomm dominated 2013 with their Snapdragon range. In fact, every Android flagship of 2013 used a variant of a Snapdragon processor, with the exception of the 8-Core Exynos processor used in certain non-European models of the Galaxy S4. The first 64 bit mobile processor came in 2013 with the launch of the Apple A7. This offers certain improvements, such as a 25% performance increase just for apps that are compiled in 64bit, as well as being able to handle more RAM for the future. Processors have reached the stage where most activities on a device are fluid and apps launch very quickly. The GPU on a SoC matters more, as this determines gaming quality and can affect the FPS of general device navigation and scrolling. The Snapdragon 800 and Apple A7 are very fast CPUs. An interesting point is that while all Android flagships used a quad core CPU in 2013, Apple only used a dual core. The dual core A7 even outperforms the quad core Snapdragon 800. This is due to the ARMv8 internals of the chip. Every processor currently used in Android devices is ARMv7 or less. ARMv8 offers a number of improvements including 64 bit support, faster handling of encryption and an increased number of registers.

Processors of 2014

Currently, the Snapdragon 805 is expected to be released in the first quarter of 2014. This is known to have a maximum clock speed of 2.5GHz and an Adreno 420 GPU. However, it is still based on ARMv7, meaning it is 32 bit. This means that Qualcomm is actively slowing down the development of ARMv8, even with ARMv7 currently at the end of its cycle. I expect to see an ARMv8 processor from Qualcomm towards the end of 2014. Processors will remain at quad-core for the most part and I expect Apple to keep its dual core set up which has proven itself as a great performer.

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

More details about the HTC M8

2014-01-03T11:08:00.000-08:00

In a few months we'll most likely see new high-end device from HTC. Some of the current rumours were true, but here comes much more details you've never heard before!

Device will be named HTC One+ (codename: HTC M8) and it won't have any capacitive buttons. No more "home" or "back" buttons we get used to with the HTC One (HTC M7). Camera is probably a 6MP or 8MP module, of course with the UltraPixel™ technology and probably the new HTC ImageChip™ 3. Current rumours about double lens (for low and high lighting) might be true as well. Battery capacity is much bigger now - 2900 mAh instead of 2300 mAh in the HTC One. With just a slightly bigger screen in the HTC One+ (5") versus HTC One (4,7") we can expect much better battery life.

Chipset (SoC) is very likely to be Snapdragon 805 (instead of 800). This is a very good news because Snapdragon 800 is already quite an "old" chipset. The only problem is the drivers development by Qualcomm. Let's hope that won't stop HTC from replacing S800 with the S805.

In contrast to the HTC One, the One+ will have removable micoSD card. The non-removable microSD card in the HTC One was a source of a lot of critics from Android fans. Hopefully the design of the HTC M8 won't suffer from that.

HTC One+ will be equipped with the newest HTC Sense™ 6.0 and Android KitKat.

So what do you think? I'm already very excited and really can't wait for the HTC One successor. The HTC One won almost every award in the 2013 knocking out the competition. Let's hope the HTC One+ will repeat this great success!

To summarize:

Name: HTC One+ (HTC M8)
Screen: 5" FullHD 1080p covered by Gorilla Glass 3
Battery: 2900mAh
Camera: 6MP or 8MP with UltraPixel™ technology and double lens
SoC: Qualcomm® Snapdragon™ 805
RAM: 2GB LPDDR3
Buttons: no capacitive buttons
OS: Android KitKat with HTC Sense™ 6.0
SIM: micro-SIM
Front camera: 2.1MP
NFC: yes

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

How to: use "adb sideload" on your Android device

2013-12-18T10:23:00.000-08:00

Probably every Android power-user at least once in his life used ADB - Android Debug Bridge. It is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. Using ADB shell commands gives you additional control over your device and sometimes it can save your device from being bricked (example: How to: copy ROM zip file to the freshly wiped device). You can find some more basic information about ADB here.

Since Android Jelly Bean there has been a new ADB mode available in the AOSP recovery, incorporated by the Android developer community into custom recoveries too. It is called "ADB sideload" and most of you probably have heard about it already. This is an alternate method to the one I wrote about here - How to: copy ROM zip file to the freshly wiped device. The main difference is that ADB sideload works only with recoveries based on Jelly Bean source or newer. I believe that ADB sideload was created to simplify the process of flashing/restoring Android update.zip packages.

Keep in mind that while using ADB sideload, the regular ADB shell won't work. To be able to use SIDELOAD mode make sure you're running latest ADB drivers from the Android SDK (Platform-tools). Here are the simple steps you need to follow to flash update.zip package using adb sideload mode (based on stock Android recovery):

Place the ZIP package you want to install in the same location where you keep ADB drivers - adb.exe, AdbWinApi.dll and AdbWinUsbApi.dll (usually it's SDK\platform-tools)
Make sure you have USB debugging enabled in Settings > Development on your device
Make sure your phone drivers are installed on the PC you're going to use
Boot your device in recovery mode (Android logo with a exclamation mark) and connect your device to PC
Hold down "power" button first, followed quickly by "volume up" button. You should now see the recovery menu
Use the volume up/down keys to select "apply update from ADB," then press power to select it
Open a command prompt on the PC (cmd.exe), type and confirm with ENTER:
cd /d <adb.exe location> (for example: cd /d c:\SDK\platform-tools) or you can open your SDK/platform-tools folder, then press SHIFT button and the right-click mouse button and choose “Open command prompt here”
adb sideload <filename>.zip (for example: adb sideload update.zip)
The zip package will begin installing. When it's done, select "reboot system now."

How is that different from the alternative method? You don't have to manually create the proper folders structure, push the file and later install if from inside the recovery menu. The result is basically the same, because ADB sideload is also transferring the zip file into the device internal memory and later it automatically begins the installation procedure. However, it works only with recoveries based on Android Jelly Bean source.

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

How to: manually install an OTA update on your HTC device

2013-12-09T01:29:00.000-08:00

Sometimes it turns out that your device for some reason can't find the most recent OTA (Over The Air) update. However, there is a solution to apply OTA update manually, without being forced to wait for the update being downloaded and installed by your device.

Facts you need to know before continuing:

This method has nothing to do with the "adb sideload" feature available on Android devices since Jelly Bean. It should work on every Android HTC device.
Read about different software versions for the HTC devices here. Keep in mind that the OTA update must match the software version on your device. Each original OTA update.zip package has 2 different software versions in its name - the version of the software that must be currently installed on your device and the version of the software that your device will run after the update. For example:

OTA_M7_UL_JB43_SENSE55_MR_HTC_Europe_3.62.401.1-2.24.401.8_release_338160gxmo5sd9337kadux.zip

As you can see, 2.24.401.8 is the software version you must currently have installed to be able to run the OTA and 3.62.401.1 is the version of the software expected after the update. You can't flash an OTA update on a different software version to that expected by the OTA update for two main reasons:

Formal reason - the OTA update.zip package checks if your system is running the expected software version before it starts to install the update:
assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc/htc_europe/m7:4.2.2/JDQ39/235216.8:user/release-keys");
This must match the following build fingerprint from the build.prop. If the versions don't match, the installation of the OTA package will be cancelled.
ro.build.fingerprint=htc/htc_europe/m7:4.2.2/JDQ39/235216.8:user/release-keys
Technical reason - OTA update.zip packages usually contain patches for the target files. This way OTA update doesn't have to be 1GB size, even if it is supposed to update the whole OS to the newer version. Patch files have an *.apk.p extension (f.g. Camera.apk.p) and each patch file must match the target file (f.g. Camera.apk). To make it possible, OTA update.zip package checks the MD5 checksum of each file on the system partition on your device:
assert(apply_patch_check("/system/app/Camera.apk",
"b3b79e40bad0b1bec5fb949ac5f8662f91bee714",
"5a5bf63e3d7c9de52a7d8d7a292e158263783844"));
And finally, if the MD5 is correct it applies the patch. All these commands are stored in META-INF\com\google\android\updater-script of each OTA update.zip package. If the MD5 is incorrect, or at least one file is missing, the installation of the OTA package will be cancelled.
assert(apply_patch("/system/app/Camera.apk", "-",
b3b79e40bad0b1bec5fb949ac5f8662f91bee714, 4229394,
5a5bf63e3d7c9de52a7d8d7a292e158263783844,
package_extract_file("patch/system/app/Camera.apk.p")));

Now you are ready to manually apply the OTA update on your device. The method you'll use is based on Android stock recovery.

Make sure you have the stock (original) recovery flashed on your device
Make sure you're running a completely unmodified operating system. Additional files like Superuser.apk or su binary are allowed, you just can't have any system files changed or removed (due to the MD5 check)
Make sure you have a reasonable amount of battery charge remaining
Make sure the OTA update you're about to install matches the software version on your device
Copy the OTA update.zip package to your device (internal storage preferred)
Turn OFF the device (make sure fastboot mode is disabled in settings)
Hold your volume down and power keys until the bootloader starts up
Using the volume keys, navigate down to RECOVERY and press power
You are now in stock recovery mode. You should see nothing more than a (sometimes spinning) Android with the red exclamation mark above it (an empty black screen is also possible). Wait for a few seconds
First hold volume up, then (with volume up held down) press power button to enter the main recovery menu. This keys combination may vary from device to device. Try different keys combination if the above one doesn't work (might be all three keys all together too)
Navigate down to "apply from phone storage" text and press power to confirm
Navigate to the location where you copied the OTA update.zip package and press power to confirm
Wait (sometimes you might need to follow further instructions on the screen) until the update process is finished
Once system is booted you should see a confirmation about the successfully flashed update.

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

HTC ROM Update Utility (RUU) variants explanation

2013-12-08T15:13:00.000-08:00

Owners of HTC devices might be a little confused when it comes to understanding the current method of numbering used by HTC to mark their software updates. Here you can find a short explanation of this matter.

First of all, we all know that HTC sells their devices all over the world. Every carrier and region of the world has some more or less different "local settings". By "local settings" I mean things like: emergency call numbers, languages, time-zone settings, network settings, carriers branding, GPS settings and more. Because of that each software for even the same device must be different.

Secondly, even the same device might use different hardware related to the region of the world. For example, HTC One is available in at least 6 different hardware configurations. One of the main difference is modem version. GSM version of the HTC One uses MDM8215 chip and LTE variant has MDM9215. Verizon (US) is known to have MDM9615. So that's already 3 different versions of the same device.

Every HTC update has the following numbering structure:

a.bb.ccc.d

a - the first number of the software. Normally it doesn't increase very often, but when it does, it usually means newer Android version.

bb - this number is also a software number. Increasing bb number means some more or less major update based on the same Android version, but sometimes it might even bring newer version of the HTC Sense.

ccc (also cc or cccc) - this is the number of the region/carrier. It has nothing to do with the software itself being newer or older. More details below.

d (sometimes dd) - the third part of the software version (the fourth one in the RUU name). Usually indicates some minor update with some hot fixes.

Example: 3.20.401.3

So basically, when you are interested in the software version, you should look at a.bb.d (3.20.ccc.3) because ccc (401) means only the region/carrier variant of the software.

Here is the list I was able to gather of possible RUU variants:

a.bb.61.d - Orange UK (United Kingdom)

a.bb.65.d - Orange CH (Switzerland)

a.bb.69.d - Orange PL (Poland)

a.bb.73.d - Orange FR (France)

a.bb.75.d - Orange ES (Spain)

a.bb.110.d - T-Mobile UK (United Kingdom)

a.bb.111.d - T-Mobile DE (Germany)

a.bb.112.d - T-Mobile AT (Austria)

a.bb.113.d - T-Mobile CZ (Czech Republic)

a.bb.118.d - T-Mobile PL (Poland)

a.bb.161.d - Vodafone UK (United Kingdom)

a.bb.163.d - Vodafone FR (France)

a.bb.165.d - Vodafone IT (Italy)

a.bb.166.d - Vodafone CH-DE (Switzerland - Germany)

a.bb.168.d - Vodafone GR (Greece)

a.bb.169.d - Vodafone AT (Austria)

a.bb.206.d - O2 UK (United Kingdom)

a.bb.207.d - O2 DE (Germany)

a.bb.401.d - World Wide English (WWE)

a.bb.415.d - Arabic (UAE/Middle East)

a.bb.468.d - Turkey

a.bb.497.d - Morocco

a.bb.498.d - WWE Brightpoint US (United States)

a.bb.502.d - Cingular US (United States)

a.bb.531.d - T-Mobile US (United States)

a.bb.631.d - Rogers Canada (WWE)

a.bb.651.d - Sprint US (United States)

a.bb.661.d - Telus WWE (Canada)

a.bb.666.d - Bell Canada

a.bb.707.d - Asia (WWE)

a.bb.708.d - Asia HK (Hong Kong)

a.bb.709.d - Asia TW (Taiwan)

a.bb.720.d - Asia (India)

a.bb.728.d - Virgin AU (Australia)

a.bb.751.d - Chunghwa Telecom (Taiwan)

a.bb.771.d - Hutchison 3G UK (United Kingdom)

a.bb.777.d - ?

a.bb.841.d - Telsra WWE (World Wide English)

a.bb.862.d - Voda-Hutch AU (Australia)

a.bb.901.d - TIM IT (Italy)

a.bb.911.d - SK Telecom (South Korea)

a.bb.980.d - Optus AU (Australia)

a.bb.999.d - HTC Test RUU

a.bb.1400.d - China

a.bb.1401.d - ?

a.bb.1403.d - HTC China CMCC (China Mobile Communications Corporation)

a.bb.1540.d - HTC One U.S. Developer Edition

a.bb.1600.d - ?

a.bb.1700.d - HTC One Google Edition

The list is quite long, and I'm sure there are still some some missing. If you know more variants, please let me know in the comments section.

The 401 and the 707 devices are usually the first ones that HTC prepare updates for. Carrier branded software is usually months after the WWE updates.

Finally, keep in mind that each software version is connected with the CID (Carrier ID) and MID (Model ID) of your device. That means you can't use whichever version you want, unless you have S-OFF on your device. Each ROM Update Utility.exe package will check your device details (bootloader version, MID and CID) before starting the update process.

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

How to: copy ROM zip file to the freshly wiped device

2013-12-08T14:53:00.000-08:00

Have you ever been in a situation where you mistakenly (or not) wiped the content of the internal storage (including system partition and virtual SD card) on your phone or tablet and unfortunately it doesn't support external storage? Now you can't flash desired custom ROM because you removed it and the device can't be booted due to wiped system partition. Don't worry - it's very easy to fix!

Here are the steps you need to follow to copy the correct rom.zip package to your internal storage:

Download this mini-sdk package and extract it to c:\mini-sdk
Rename the custom ROM package you want to flash to "rom.zip" and copy it to c:\mini-sdk
Connect your device to the PC
Boot your device in recovery mode
Open a command prompt on the PC (cmd.exe), type and confirm each command with ENTER:
cd /d c:\mini-sdk
adb shell
mount /data (error might mean that /data partition is already mounted)
on Android 4.2 and above: mkdir -p /data/media/0
on Android 4.1.2 and below: mkdir -p /data/media
exit
on Android 4.2 and above: adb push rom.zip /data/media/0
on Android 4.1.2 and below: adb push rom.zip /data/media
Wait for a few minutes until the file is copied. It will looks like command shell is not responding, but that means it's still copying. Wait patiently until you'll see blinking cursor again.
Depends on your custom recovery, use the navigation keys to flash the custom rom.zip package in a typical way you used to flash custom ROMs. It should be on your internal storage now. Done!

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

HTC One with KitKat and HTC Sense 5.5 is finally out!

2013-12-01T07:23:00.000-08:00

Android 4.4 KitKat with HTC Sense 5.5 is now available for the HTC One. This is a must-have update for all HTC One owners.

Sounds great? Well, you might not be happy after all. So far the update is available only for the owners of the Developer Edition of the HTC One. But there is a good news too - you can have KitKat update on your "regular" HTC One too, without waiting for the official update (which might take few more weeks).

To make it possible, Android Revolution HD has been updated to 40.x series, based on the official Android 4.4 KitKat & HTC Sense 5.5 update (4.06.1540.2).

Why KitKat update is that important? It has several very important changes:

Vastly improved security
Smarter "Location" settings
Better performance
Improved battery consumption
Faster multitasking
Better Google Hangouts integration
...and much more!

Here are some screenshots. You can see the new Location settings panel.

Users feedback so far leaves no doubts - this update brings significant performance improvements. Some users are even reporting, that Android 4.4 with HTC Sense 5.5 gives better performance experience than pure KitKat update for the HTC One Google Edition which we wrote about here. I think this is enough said. Don't stay on your old 4.3 OS and grab newest 4.4 update as soon as possible!

Link to the original XDA-developer thread
Link to the download page

Have any questions or comments? Feel free to share! Also, if you like this article, please use media sharing buttons (Twitter, G+, Facebook) below this post!

HTC Desire 700 Full Phone Specifications

2013-11-29T08:31:00.000-08:00

HTC Desire 700 is a dual SIM smartphone that powered by a 1,2 GHz Quad-core Qualcomm snapdragon 200 processor and run on 4.2.1 Jelly Bean. This device that has been launched at November 2013, has a 8 MP camera on the back with LED flash. This phone also has HTC blink feed home screen and HTC boomSound with dual frontal stereo speaker built-in amplifier. For Detailed about this phone specifications, please look at below.

HTC Desire 700 Specifications :

General	2G Network - GSM 900 / 1800 / 1900 - SIM 1 & SIM 2 3G Network - HSDPA 850 / 900 / 2100 - SIM 1 Dual SIM, (Micro-SIM, dual stand-by)
Dimension	145.5 x 72 x 10.3 mm (5.73 x 2.83 x 0.41 in) Weight 149 g (5.26 oz)
Display	Capacitive touchscreen, 16M colors 540 x 960 pixels, 5.0 inches (~220 ppi pixel density) Multitouch
Sound	Vibration, MP3, WAV ringtones Loudspeaker with stereo speakers, built-in amplifiers 3,5 mm Jack
Data	GPRS EDGE HSDPA, HSUPA
Memory	Card Slot microSD, up to 64 GB Internal Memory 8 GB, 1 GB RAM
Connectivity	Wi-Fi 802.11 a/b/g/n, dual-band, DLNA, Wi-Fi Direct, Wi-Fi hotspot Bluetooth v4.0 with A2DP MicroUSB v2.0
Camera	Primary Camera 8 MP, 3264 x 2448 pixels, autofocus, LED flash with Geo-tagging, touch focus, face detection, simultaneous HD video and image recording. Video 1080p@30fps Secondary Camera 2.1 MP
Features	Android OS CPU Quad-core 1.2 GHz - Accelerometer, proximity, compass - SMS (threaded view), MMS, Email, Push Email - HTML5 -TBD FM Radio - GPS with A-GPS support and GLONASS - Java MIDP emulator - MP4/H.263/H.264/WMV player - MP3/eAAC+/WMA/WAV player - Google Search, Maps, Gmail, YouTube, Calendar, Google Talk - Document viewer - SNS integration - Photo viewer/editor - Voice memo/dial/commands - Predictive text input
Battery	Li-Po 2100 mAh battery Standby - (2G) / Up to 582 h (3G) Talk Time - (2G) / Up to 11 h 40 min (3G)

Setting up the Samsung Galaxy S 2 Duos, With Features Multi Window in 4 Inch Screen

2013-11-28T22:29:00.001-08:00

Samsung rumored to be soon released other Android phones. This time is said to be released is the successor version of the Galaxy S Duos, the Galaxy S Duos 2.

picture by : 91mobiles.com

With support for dual-SIM like his brother, the Galaxy S Duos 2 will come with a 4 inch screen size with a resolution of 480x800 pixels. The default screen that will be powered by a dual-core processor speed of 1.2 GHz and 768 MB of RAM and 4 GB internal memory which can be expanded with a microSD card.

In addition, the Galaxy S Duos 2 also brings resolution 5 MP main camera and a 1500 mAh capacity battery-backed Android operating system 4.2 Jelly Bean. Interestingly, Samsung Multi Window pinning support in this phone, but usually this feature is only included on Samsung phones upscale.

Unfortunately, there has been no further news about the future availability and price leaked from the Galaxy S 2 Duos.

Samsung Galaxy Note 3 Adds Two New Colors

2013-11-28T22:12:00.000-08:00

Compared with the Galaxy S4, Galaxy Note 3 launched with a fairly standard selection of colors such as black and white like most mobile phones today. Indeed, there is a pink color variant, but only sold in a particular region.

picture by : phandroid.com

If you want to buy this device you can probably wait until early next year, due to popular phablet from Samsung will be released with a new variant of red or white gold according to the information we can from Sammobile.

Red color variant will be launched in the first week of January, where the white gold to be followed two weeks later. Estimated time is not necessarily 100% true, but one thing is for sure these two new color options will be released in January, and is said to be available for the world market.

Huawei G750 with MediaTek Octa - Core Processor

2013-11-28T22:05:00.000-08:00

The presence of Huawei smartphone that uses an 8 - core ( octa - core ) seems to be getting close. After the device has been leaked previously circulated, this time the appearance of the device is starting to look on the internet.

picture by : logeekamente.com

From the appearance, it appears that this device has previously codenamed G750 reportedly called Huawei Glory/Honor 4. Although not yet certain whether this device is Glory 4, but there are similarities specifications are taken, ie wear perosesor MediaTek octa - cores.

Reported mydrivers Chinese-language website, MediaTek MT6592 processor used G750 is capable of running up to 1.7 GHz on each core and Mali - 450MP GPU use. Smartphone with 3.000mAh battery is in the phablet category because the screen has a size of 5.5 inches. In a screen of it, unfortunately not wear Huawei G750 Full HD 1080p resolution, but 720p HD.

In addition, the specification can be confirmed from the leak this time is the Huawei G750 has 2GB of RAM and 32GB of internal memory. While in the back of this smartphone are 13MP resolution main camera and in front bagin 5MP camera artifacts. This smartphone also known middle run Android 4.2.2 operating system with Huawei Emtion typical interface UI .

Samsung Spend 14 Billion Dollars Only for Marketing and Advertising in the Year 2013

2013-11-28T21:56:00.000-08:00

Based on the data and the results of the latest investigations, Samsung is expected to spend about $ 14 billion just for advertising and marketing strategy for the year 2013. The $ 14 billion figure recorded 3 times larger than Samsung's advertising and marketing budget in 2012 ago.

Samsung expenditures for marketing and advertising sector alone is estimated to have approximately 5.4% percentage of the total profits. This percentage is very high when compared to Apple who only spends about 0.6% of its profits for the advertising and marketing sector.

These facts alone seem to support comments spicy as those made by HTC President, Jason MacKenzie. In March 2013 yesterday, he expressed his opinion that at this time the Samsung is more concerned with marketing than investing in the investment sector innovation sector.

Nokia Video Director, Exclusive to Lumia 2520

2013-11-28T21:50:00.000-08:00

More than a month ago at Nokia World, the Finnish company has announced several new applications along with tablets Lumia 2520. Some new applications are Nokia Storyteller, Beamer and Video Director. Nokia Video Director is available now and exclusively for download on the Nokia Lumia 2520 tablets.

picture by : wpcentral.com

Nokia Video Director allows users to create their own movie, with a simple way to combine your video and image collections. You can select a frame, choosing the overall style of the movie, apply different effects, giving information, choose background music and so on. The interface looks very intuitive and offers a setting that is enough to satisfy even advanced users. You can preview the movie was made, changing the style right before you save it.

Nokia has also released a companion app for Lumia devices, which allows you to capture video clips with Lumia smartphones and directly send it to you via NFC Lumia 2520. The videos you create can be saved with a different framerate and resolution to suit your needs.