Voxilla VoIP Forum - IPKall Support Forum

How long until number issued

RVD420 — Thu, 02 Jul 2009 02:02:40 GMT

I am wondering how long until a number is issued. I had an IPKALL number, but it was inactive for about a year while I was in Iraq. I got back and found out that the numbers are canceled after 30 days of inactivity. I am hoping that I can get a new number going soon. I requested a new number 2 days ago.

Why no response

bacaswrd — Sun, 28 Jun 2009 03:48:48 GMT

Is there anybody out there that can help?

Dukadial

J4D3 — Sun, 28 Jun 2009 00:48:55 GMT

Hi, guys im using dukadial as my dialer for the outgoing call.. but the website dukadial will be no longer in service after July 2..

Do you have any other dialer or website that I can use to dial?

Thanks in advance

Getting set up with IPKall - newbie, terminology, steps?

sciconf — Fri, 26 Jun 2009 16:23:04 GMT

Hi

I have a VoipStunt a/c. Use a SIP IP Gateway.

1) Register your SIP IP phone with a VoIP service?
I am unsure how to do it - I went to those sites but don't see anything about registering?

2) http://phone.ipkall.com/
2.1) What is "SIP Phone number" ? Who gives it to me? What does it looks like?
2.2) And the same questions for SIP Proxy?

3) "SIP Phone number" on phone.ipkall.com/
When I enter my SIP address there, it runs out of space - so I can't enter it!
longinxxx@sip.VoipStunt.c
can't type ".com" fully??

I appreciate it.

Received a Phone Number but unable to use

jimboys — Fri, 26 Jun 2009 16:10:47 GMT

Hello,

I received an email reply from IPKall yesterday with a Phone Number and the rest of the information that I originally registered with.

When I try to login following the link provided in the email, I'm not able to. I receive the message: Invalid number or password

When I try to use the Forgot Your Information link and supply my email address, I received this message: There are no accounts registered under that email address.

When I try to call the number, a voice recording says something like: The number you called is an unassigned number.

Am I doing something wrong or did IPKall not properly/completely register the phone number emailed to me?

Please Help...

Thanks,
JB

Ring Xlite - iptel FROM IPKCALL PSTN

sirmikey1 — Mon, 22 Jun 2009 23:44:12 GMT

psagma,

My ipkall DID works perfectly with SIP account
from mysipswitch.com IPKALL account settings requires
this:

Account type: SIP
SIP Phone Number: your mysipswitch membername
SIP Proxy: sip.mysipswitch.com
Email Address: <---Must be a valid email address
Password: your mysipswitch password

Mike

IpKALL with voipcheap

Nothing55 — Sun, 21 Jun 2009 18:32:36 GMT

Are the above instructions *only* for the sipura adapter?

I've looked for similar settings ... on my VoIP SIP phone and don't see most of the fields. :( Does that mean that its impossible to bypass VoIPCheap if I'm using an IP0020 phone?

Any problems known with voiptalk?

Nothing55 — Sun, 21 Jun 2009 01:05:22 GMT

I am having the same problem, too... but figured I just didn't have it set up correctly. I just posted about it ...

:(

New user here, quick question regarding: IPKALL + VoIPCheap + IP0020 phone

Nothing55 — Sun, 21 Jun 2009 00:51:37 GMT

Okay, I'd like to apologize if this has been covered elsewhere ... I tried searching without any good results. Also, I'd like to apologize if this is kinda a n00b question, I don't have much experience with this.

I recently purchased and hooked up an IP0020 VoiP phone ... I have a VoIPCheap.com account ... and I registered for an IPKALL number.
After hooking up my phone and configuring, I was able to immediately dial out successfully.

But when people try to call my IPKALL number, my phone will ring ... but when I answer, I am the one who gets the busy signal. Part of the issue ... is that most of the solutions seem to deal with a CONFIG file ... whereas my VoIP phone seems to be configured via a webpage that I access through my browser.

For my IPKALL configuration I am using the following:

SIP Phone: [VoIPCheap username]
SIP Proxy: [sip.voipcheap.com]

The problem comes ... from how I'm suppose to configure my phone. What should the values be for the following fields? Any suggestions?

SIP Server Address
Outbound Proxy
SIP User ID
Account ID

??

Please. Any help would be appreciated

X-Lite Configuration with IPKall

sirmikey1 — Thu, 18 Jun 2009 22:17:25 GMT

Fwd pulver means that you need to open a free SIP ACCOUNT with fwd pulver or elsewhere. IPKall is merely forwarding the calls to your SIP ACCOUNT with IT'S username and password; and servername. you would setup xlite with the same sip account settings. IPkall and xlite...

I would open a free SIP account with mysipswitch and use this for your ipkall forwarding and xlite settings. Do this, and you are ready for action.

It's really very simple..

Mike

Need Help Setup for Incoming

sirmikey1 — Thu, 18 Jun 2009 22:11:20 GMT

Hi,

Just login to IPKALL and enter your telephone's SIP account name, password and server name and it should ring. IF you don' have a SIP account, open one with mysipswitch and enter that with IPKALL instead.

IF you are using the softphone, use the mysipswitch SIP account to configre the softphone account and IPKALL forwarding, and that phone should now ring. Mysipswitch lets you ring all phones at once.

You can later add voice service providers (VSPs) to mysipswitch for things like free toll-free calls dialing, free voicemail, free 411 dialing, free SIP calls and Enum/INUm dialing, and, free SIPCode dailing. On the softphone, click the checkbox to register, but do not check register on the mysipswitch account settings. Search the mysipswitch forum for help with that....

Mikey

No sound when reciving calls from ipkall through gizmo

voiplic — Thu, 18 Jun 2009 01:45:05 GMT

This actually seems to be a problem with the gizmo5 software because the sound works fine when I connect through x-lite

INUM and DID

drmarc — Wed, 17 Jun 2009 19:14:13 GMT

Hi

New here and don't quite get it yet. I am about to get an INUM. Can I use that with an IPKALL number registered to a sip account and avoid any in call or out call charges? I currently have a Callcentric account and a Gizmo account. Can I do this?

BTW I also have my old PSTN line number ported to Callcentric on my sip number.. I am planning on getting my INUM through Callcentric because I already have an account with them. If I register my Callcentric account with my INUM will I incur incoming charges to my Callcentric DID? Can I get an INUM from them without registering it to my account?

Thanks..........dm

I can't call my number

proteus — Mon, 15 Jun 2009 09:32:37 GMT

But voipstunt is not free, after 60 minutes you have to add $5 credit to continue calling...

Incorrect CID when the call originates from Gizmo5 (SIPPhone)

asrivasry — Mon, 15 Jun 2009 04:14:52 GMT

I have a (425) 406-xxxx number from ipkall forwards to sipphone voip.

When I call my 425xxx number straight the caller id is correct.

My google voice account also forwards to ipkall. For any call originating from google voice passig through ipkall, I get incorrect caller id 2062040232.

This started happening about a month ago.