Web Contents Free

The World of Cracks and Potholes

2011-04-09T07:59:00.000-07:00

Our pavements have never been in a worse state of disrepair than they are today. The reason for this are many. It is estimated that 650 potholes open up every minute in North American streets and highways or 341,640,000 per year. The cost of repairing these would require $51,264,000,000 per year. It is also estimated that there are 88, 070,400,000 feet of cracks in North American streets and highways that need to be repaired annually at a cost of$28,182,528,000. To repair the potholes and cracks requires $79,428,528,000. This is an enormous sum which towns, cities, counties, state and provincial governments have to come up with annually. No matter what, these potholes and cracks will be there every year. In addition, the North American motorist incurs substantial annual costs associated with poor roads above normal routine costs of operating a motor vehicle. A fairly recent report stated that in Los Angeles, the additional cost of operating a motor vehicle is $778. The additional annual cost of operating a motor vehicle in other North American cities is somewhat less, but still significant. Poor road conditions contribute substantially to the number of fatalities annually.

Pavements showing various distresses such as cracks, potholes and ruts also contribute significantly to an increase in fuel consumption. A 1985 road information survey concluded that the additional fuel consumption due to failed pavements amounted to $21.3 billion US dollars annually. The average price of gasoline at the time across the United States was $1.15 per gallon. That means the amount of fuel wasted was 18.52 billion gallons. We can safely say that the amount of gasoline wasted today due to failed pavements is significantly higher. Today, we not only have more failed pavements than ever before, we also have many more cars on the road.

Towns, cities, counties, state and provincial governments have a number programs in place in the hope that it will keep their street and highway pavements in a state of good repair. Their programs consist of preventive maintenance which means filling cracks and potholes, overlaying their failed pavements with a lift or two of conventional asphalt concrete, or reconstruction of a failed pavement. To follow these programs requires an enormous amount of money. This amount of money is difficult to come by, especially during this financial crisis. Cities, towns and counties are near bankruptcy. Even formally wealthy states like, California, are forced to terminate 20,000 government jobs and slashing the pay of 200,000 other employees(during fiscal 2009). The credit crunch of(2008) may last for many more years before enough private capital is available to fuel the economy. Most of the capital available today has come from the stimulus packages passed by Congress. What does all this mean? It means most of our pavements will remain in disrepair for the foreseeable future. If funding is restored to pre2008, it will still be insufficient to cope with all our failed pavements.

Our present approach to deal with all the failed pavements requires new thinking by all of us. The first thing we must do is to think out of the box. So let us look at how we are trying to maintain our extensive network of streets and highways. One term that we constantly bandy about is "Preventive Maintenance". What exactly are we trying to prevent? When we fill potholes or cracks, do we really believe that they are repaired permanently? When we overlay an old failed pavement with one or two lifts of new asphalt concrete, do we really believe that cracks and potholes will not reflect through the new overlay? If we do, then we need a drastic re-evaluation of our experience, training and education. Our so called preventive maintenance involves conventional asphalt concrete either dense-graded or gap-graded. Use of conventional asphalt concrete mixes will do nothing to prevent the old failures from recurring in a very short time. Sometimes it may be only a few months or a few years but they will recur. Paving streets, roads and highways requires huge quantities of crushed aggregate which is readily available. When this aggregate is mixed with the proper amount of asphalt cement as determined in the laboratory, the resultant asphalt concrete mix is classified as conventional asphalt concrete. Conventional asphalt concrete is relatively economical compared to other construction materials. This is one reason why it is used so extensively in road construction. The pavement failures we observe is the direct result of using conventional asphalt concrete mixes. We can change the gradation of the aggregate all we want without improving the performance of the pavement significantly. Thus, we can have dense-graded mixes or gap-graded ones and in the long run find very little improvement. It may take a little longer for a gape-graded pavement to crack compared to a dense-grade asphalt concrete mix. However, the resultant cracks will be wider and grow faster because of the predominantly larger particle sizes. There are many products on the market that claim to mitigate reflective cracking. Some work better than others while some do not work at all.

When we mitigate or even eliminate cracking of a new pavement or reflective in overlays, we will at the same time eliminate the formation of most potholes. As a result, we would drastically reduce the annual cost of $79,428,528,000 to fill all the cracks and potholes that appear every year in North American streets, roads and highways. From the foregoing, we can conclude that, it will continue to require enormous funds to just maintain our highway infrastructure.

The various state and provincial governments own, on average, less than 15% of the roads and highways. The towns, cities and counties own the rest. It is these jurisdictions which carry most of the burden of pavement maintenance. As a result, it is they that have to come up with the money. Clearly, this is just too much of a financial burden to cope with. The first casualty of any budget are the funds allocated for street and road maintenance which are drastically reduced. Is it any wonder that our streets and roads are in such disrepair.

The Feedback Mindset

2011-04-08T19:58:00.000-07:00

If you're about to be the focus of feedback at work - or if you're about to provide feedback to someone else - it will help the process go smoothly if the right mindset is in place. The best mindset for feedback is the perspective that is open toand conducive to learning. Carefully shift your mindset to prepare for the process by doing the following seven things.

Be open. The feedback is for learning. Let it in.

Be humble. We all have things we need to do well and areas we need to improve.
Be grateful. Not everyone has the chance to gain insight into themselves. You do.
Be accountable. Everyone who provides you with feedback is devoting their time and attention to you. Do right by them by taking their feedback seriously.
Don't be defensive. If you feel defensive about feedback, you may as well skip the process. Those defenses are a giant stop sign that block the learning.
Focus on the learning. Don't get hung up on who said what or the mistakes you've made in the past. Your feedback is a jumping off point for new ways of reaching for success.
Follow through. Always remember to return to your participants and thank them for their part in your growth.

When you approach feedback with this mindset, you ensure that the process will do what it's intended to do: improve you as a leader. Whether you are providing feedback or receiving it, always remember that the right mindset can make it a positive experience.

The Pooling Group: An Unconventional Source of Capital

2011-04-08T10:57:00.000-07:00

We now would like to introduce a very unusual approach often used to raise short-term capital in the Caribbean. This is a method mostly used to save money for special events, such as the purchase of a car. It has become so popular in the US now, that banks use it as an acceptable way to finance the down payment for the purchase of a home. We believe that in certain circumstances, it might be a great capital formation strategy for a small business buyer. The following are the most important characteristics of this technique:

It is initiated by a Group of five (5) or more people
Each member of the Group is employed or is a business owner
The Group is supervised by a manager (usually the organizing member)
There is a solid commitment by all members to carry out the entire "round" (to be discussed shortly)
Group members are required to contribute an affordable monthly (or whatever contribution frequency they agree upon) amount, usually $500 or more

To carry out the task of helping its members raise needed capital, a Group can be defined by the following:

Number of members
Group head: the person in charge of collecting contributions and disbursements to members. This person is also responsible for keeping track of the logistics of the Group. That is, s/he keeps track of members that have received their round, those that are missing contributions, etc.
Contribution amount
Frequency of contribution (usually monthly)

Such a Group is basically a twisted version of an investment club. Members, usually friends and/or family, unless there is an independent Group Manager, agree to pool money by contributing monthly to the fund. Each month, one member gets the entire amount contributed by all members in a round robin fashion. The cycle continues until everyone has received a pay-out, also called a "take" or hand. Note that this is simply a way to get a lump sum at a specific time based on your position in the queue. For a business buyer, the best position in the queue is probably the first one, because the first person in the queue receives the first "take". This would then allow for his/her future contributions to be drawn from the operations of the acquired business.

Please note that this is not a savings account. In the end, contributions and pay-outs cancel each other, such that members do not gain or loose any money at the end of a round. (See table below). In addition, money contributed by the Group's members is never deposited in a bank account, hence earns no interest. To illustrate, let us create a fictitious Group of three members (Member 1, Member 2, and Member 3). Let's assume that each member contributes $100 weekly. There are as many cycles (or rounds) as there are members, in this case three cycles (Week 1, Week 2, Week 3). The total amount of each member's take when his/her turn arrives is $300, which is also equal to the total amount of money contributed.

Week 1

Member 1 Member 2 Member 3

Contribution $100 $100 $100

Payout $300

Week 2

Member 1 Member 2 Member 3

Contribution $100 $100 $100

Payout $300

Week 3

Member 1 Member 2 Member 3

Contribution $100 $100 $100

Payout $300

So, if a buyer can manage to create one of these Pooling Groups around the time that the closing is scheduled to take place, s/he can use this very simple technique to raise the necessary funds to close on an acquisition.

Lunch Time Seminars

2011-04-08T08:56:00.000-07:00

Employees have so little time to learn and they have to eat... so why not put the two together. Lunchtime seminars are great way to share in-house knowledge as well as bring in external business tools.

Like any program, you have to market it... what's the value to the employee to give up their lunch or to stop working. What's the value to the company?

More and more employees eat while working. You want to manage the employee's effectiveness on the job. This could be a nice break for them. Visually I believe that we need a change and taking employees away from the PC for an hour gives such a break.

The most important reason is that you are providing the space for them to develop their knowledge and skills... that's a win-win for everyone.

What ideas work for lunchtime seminars? Well you can do a one-time only seminar or a series of seminars to build knowledge on a specific topic.

Here are some great topics:

**Technology - do you have an expert on staff for a particular form of technology? This is great way to bring the other employees up to speed on what is new. Since the employee may put in some time creating the presentation, give them a 'thank you' bonus of gift certificate to a technology site.

**Careers - bring in HR or a strong manager who can provide 'how to' build your career. This is a great topic for a series.

First, the employees define what they want and continues with further lunchtime meetings to learn how to build their career.

Encourage employees to take control over their careers. Yes, t's great if the manager drives it, but ultimately the employee s in charge of their careers. Give them the tools and it will make your life easier.

**Time management topics - this is a broad subject as there are different models of time management. Find one that works for your company.

**New industry trends - Great topic for a senior manager to present. The senior manager provides industry direction as well as meets with employees and interacts with them.

**You can also bring in a guest speaker...a well-know author in the field.

**Company financials - companies have different opinions about this subject, yet informed employees make better decisions.

**Business change - bring in lunch and communicate to the employees what the changes are about and how it will affect them. Have several meetings to continuously communicate the change and gather feedback

**Community participation - how the company supports the community as well as helping employees find ways to volunteer in non-profit environments.

**Work/Life Balance - most companies initially see this as counterproductive because they automatically believe the employee will work less. If you are managing employees, it's not the time in the office, but rather the effectiveness of the time.

**Health & Wellness - bring in a health fair or have a professional come in to speak about exercise, nutrition or other topics that are important to your employees.

**Allow employees to take teleseminars in their profession. For example, Society for Human Resource Professionals has several hour-long teleseminars during the month. Guest speakers provide current information on pertinent information for HR professionals.

==>What to Do

**Set up a committee of managers and employees to brainstorm around what topics are valuable for the company and employee.

**Select a list of your top subjects

**Create a list of potential teaching resources - internal and external.

**Create a budget because every action within a company costs money. The question is the return on the investment.

**Find the teaching resources that fit your budget

**Create a calendar of lunchtime seminar dates

**Publish the calendar with description of the seminar

**Market to employees and encourage them to participate - this you will need to do on a regular basis.

==>Final Thought

Knowledge is driving business now and your employees are the keepers of the knowledge. Anytime you can provide additional development for your employees, you benefit in multiple ways. The employee is able to perform better and they are interested in staying at a company that creates strong 'learning' environment.

NOTE: Each state has a different legal requirement around lunchtime for hourly employees...so check out how you can offer your hourly employees the same opportunities and still be within legal boundaries.

What Is a Marketing Funnel?

2011-04-08T07:55:00.000-07:00

I wish I could say that I created the business model called the Marketing Funnel, but it has actually been in existence for many years. This model is so powerful and has been used to transform many businesses just like yours! It acts as a guide to help you create multiple streams of income. Being a successful entrepreneur is about turning time into money, and having more than one income stream is arguably the best way to do just that. This business model illustrates the way to leverage your time and knowledge which will allow you greater freedom and success in your life and business.

So, what exactly is the Marketing Funnel? Visualize a triangle and turn it upside down with the point at the bottom and the wide part at the top. It should look like an ice cream cone. The concept is to get as many people in your target market to enter your marketing funnel at the top. You do this by creating a free sample of your work. This can be a free report or any other kind of special offer.

Once people enter your marketing funnel, you continue to offer them free access to you by publishing an ezine with highly valuable content. As you move down your funnel, you offer products and services with increasing costs. The idea is to have some people reach the bottom of your funnel and work with you one on one (these are your VIPs) and offer products and services at various price points along the way. Not everyone will reach the bottom of your funnel, which is precisely why it's more narrow at the bottom. The fact is that you need clients and every level of your funnel. The "do it yourselfers" will be happy to purchase a home study course or other information product that is located toward the top and middle of your funnel. Others will want more direct contact with you and will end up at the tip of your funnel where you work with them one on one.

I love this business model for many reasons. First, this is a great way for your prospects to "test drive" your products and services prior to making a purchase. Second, it's a sure-fire way for you to connect with your target market and find those who are attracted to your energy, message and style. Let's face it, there are many people out there in the same industry as you offering roughly the same things, but trust me - there is a segment of the population that you are meant to serve! Third, you give your target market many options for how to work with and learn from you. For example, they can start by purchasing a low-cost e-book on a topic of interest for only $29. This is a low-risk investment for them, and it's an opportunity for you to showcase your work. By delivering everything you promise in this e-book, chances are good that they will be willing and perhaps even eager to purchase from you again at this price point or higher, which then moves them down your marketing funnel. Fourth, this business model moves you away from trading time for money ($X per hour). Having multiple income streams allows you to free up your time to focus on the VIP clients you select - all while keeping, or more likely, increasing your revenue.

There are many ways to create products and services for your marketing funnel. Here are just a few:

- e-book - e-course - teleseminar - workbook - membership program - paid newsletter - manual - checklist - workshop - webinar - seminars - audio class

This works for any industry, so don't think this isn't for you!

The Marketing Funnel is a fantastic way of helping more people and creating more streams of income! It is a strong and relevant concept for today's service-based entrepreneurs. While the concept is simple, it is also important to carefully structure your products and services so they compliment and build upon each other.

Alienware m17x CPU Overclocking

2011-04-07T20:09:00.000-07:00

hi looking for some help to overclock this monster Alienware m17x i am having Intel Core QX9300 2.53GHz with 12MB cache so please tell me how to overclock it also can any one tell me is that need to over clock 4 core simultaneously ? or any other thing please reply

thank you

If you go through the BIOS to see the overclocking options in Area-51 m17x that is hitherto simply absent on different models of the brand. The least i can say is that here too Alienware has nothing left out .The possibilities are less. Start with the multiplier which you access if you choose a processor family from Intel Extreme and first observation you will naturally increase this value but you can also go down. The values range from 8.5 up to 16 in increments of 0.5. Not sure that the value 16 is exploitable .

with 8.5 Core 2 Extreme Quad Core QX9300 sees its operating frequency down to 8.5 x (1066 ÷ 4) = 2.27 GHz instead of 9.5 x (1066 ÷ 4) = 2.53 GHz . But at 12.5 we are already at 12.5 x (1066 ÷ 4) = 3.33 GHz with a gain of 31.62% compared to the original frequency anyway. first tried to reach the FSB frequency of the highest possible. To do this we lowered the multiplier to the lowest 8.5, and then gradually increased the FSB via the NVIDIA Control Panel

i could get the Core 2 Extreme QX9300 with a multiplier of 12.5. At 13, the machine refused to boot properly and reboot loop when it did not make us beautiful blue screens. This gives us a frequency of 12.5 x (1066 ÷ 4) = 3.33 GHz. Not bad at all especially as Dell / Alienware does overclocking up to 3.06 GHz. Beyond tha, nothing is certain and smooth operation of the machine is not insured with risks of various crashes and varied.

Asus M4A785d-M pro and Phenom II X3 720 overclock

2011-04-05T20:05:00.000-07:00

Processors Phenom X3 II AMD quads are actually X4 with a core disabled, either because it is physically defective or their cache or because it has passed strict quality control, but 4 core exists in the X3. All you need is a motherboard chipset with the 790GX, although they have shown that also works with 790GX and 790FX boards, yes, with the SB700 or SB750 southbridge. In the BIOS of the motherboard, it has to change the value to Auto Advance Clock Calibration and that's it, save changes and reboot into the BIOS and operating system should appear the fourth core.

What I will said is that increase multiplier only, not to change anything in RAM, in addition the 2:1 ratio is correct for your RAM (DDR2). Look in the manual for your bios first if you do not clarify your bios, and you have some way to change the default options for Asus M4A785d-M pro that will automatically bring you performance .

Thermal paste is not necessary?

2011-04-05T07:06:00.000-07:00

ntil yesterday, I thought the thermal paste was required (between CPU and CPU coolers).

Having received i7 processor, open the box and read the quick guide installation of Intel processor, The installation process images with text etc etc , I'm amazed it does not make use of thermal paste.

I supposed it is very important right?

Without Thermal paste between the CPU and the heatsink, it will work but not for long.

It is likely that the thermal paste is already on the radiator in the form of a colored band.

According to Intel, a substance on the radiator is the thermal paste.

Without thermal paste, no idea! The simple metal-metal contact between the CPU and the heatsink is far enough and will trigger the thermal protection of the CPU. Again, modern space heaters are often equipped with a material that serves as a thermal paste. The only drawback is that it is usable only once. At first dismantling of processors you must put some thermal paste. If the thermal paste was useless, why intel would suggest to use to improve performance of processors.

___

Thermal material is used to fill small imperfections (gaps) between the CPU and heatsink.Ideally if the CPU was perfectly flat and so was the Heatsink, no thermal material would be needed. That's not going to happen so there needs to be thermal material. The Intel Heatsink/Fan will come with the paste already applied . If your heatsink has a pad pre-attached you can use that in the meantime, but I'd say chances are your temps won't be in a satisfactory range without it.

Overclock Asus M3A78-EM with Athlon II x2 250

2011-03-30T08:43:00.001-07:00

Certainly a great change .Not a bad result, but does not indicate the voltages of the plate. Put the PCIe to 101 or 102, normally lets you upload something else. Disable the C & Q to try.

With respect to the voltages, higher values will certainly be reading the wrong, to me sometimes I marked 10V on the 12V channel, which is impossible.

If you do not play not worth climbing the chart. ill also say that in 3300 I have a review board to rise from 700 to 800 without touching anything and without seeking the limit. The 3200 can do just what

I have seen several sites that say that this says it is not good to give much VCore, besides which apparently does not rise much further by the fact of giving more VCore, but I wonder if you can climb a little higher HTT giving a dot over the VCore voltage or NB, or chipset, or good with any parameter that escape ... NB Frequency I've seen in several places that are recommended not to exceed, and the HT Link a little below the stock 2000MHz to 1920MHz, but dont know whether it is worth raising the multiplier at x9 instead of x8 and is at 2160MHz, although performance is the same or better leave 2000MHz below what I think is desirable.

I tried with the 101Mhz PCI-e and I managed a good time with prime95 stable at 3750MHz (HTT to 250MHz), but having to turn up the VCore 0100 mV and 0050 mV NB voltage and temperature also the up about 4-5 º C rather than the configure and the difference in performance just a bit better with Super PI eg so almost prefer to leave it as is without touching voltages and some better temps too.

Well, the truth is that I use to go with more than enough RAM to 3.6GHz and 960MHz, I prefer not to push things from the limit and not have touch the voltages and lower temps, which eventually will provide more life to my machine

Sapphire Radeon HD 5870 Vapor-x overclocking

2011-03-30T04:40:00.000-07:00

Sapphire Radeon HD 5870 Vapor-x seems nice card for gaming for overclocking this card what is stress that it can handle ? how much noise it use to obtain ? is that already overclocked ? any one can tell me ?

It seems obvious technical characteristics, the proposed Sapphire, thanks to the heatsink more efficiently than the reference solution, is delivered with an operating frequency higher than the standard ones the GPU is set at 870 MHz, 850MHz compared to the canons, while memories have been brought to 5GHz, instead of 4.8 GHz In order to maintain operational stability during any kind of use, Sapphire has chosen to go even to alter the Vcore voltage, from 1.15V to 1.162V. The impact, at least in theory, you should have on consumers in this case higher, and the heat, cooling system technology Vapor chamber is a clear advantage for the proposed Sapphire

you have to choose it for overclock therwise restricted by control panel driver while MSI Afterburner can be used for the management of schemes rotation of the fan and the voltage v-core. The presence of a vapor chamber cooling technology would eliminate at least in part, the problems of excess heat, to overcome in order to track these kinds of problems during in overclocking the rotation of the fan is set manually 100%.

The ability to set even the operating frequencies directly from MSI Afterburner is not functioning usable in the case of Sapphire Radeon HD 5870 Vapor-x as often happens with the arrival of new market models is necessary to wait for a special software release to succeed to have full support. The software used in this case, the above you can see the graphical interface so best known RivaTuner.

The card is to be stable using the core voltage higher than the standard version, the GPU is increased smoothly at a frequency of 950MHz while the memory can increased up to 5.100MHz. The increase in performance, in this case is sensitive and certainly more tangible than that charged by default on Sapphire. To achieve the frequency of 1GHz was not necessary to set the voltage to 1.2V vcore, memories have proven to create major problems if you wear more than 5.100MHz, so left intact this value. Above this threshold, despite various combination of voltage and frequency, the card has proved unstable. For Sapphire Radeon HD 5870 Vapor-x level of overclocking is very good, leaving the standard voltage settings, and can reach very easily and without too many problems, the frequency of 950MHz, an attractive level, and allows you to enjoy a significant performance increase

Yet Another New iPhone Ad: 'Shopper'

2011-03-28T09:13:00.001-07:00

Apple is continuing its rapid-fire release of new iPhone commercials, this time posting one entitled 'Shopper' to its iPhone ad gallery. The new ad again uses a narrative style to feature iPhone applications, demonstrating how an iPhone user could research espresso machines, ask for opinions from family and friends, and check prices.

The commercial first features Safari, showing the mobile web browser accessing the iPhone-formatted version of ProductWiki to research various espresso machines before the narrator uses the Messages application to send MMS messages to his wife's sister for opinions on color. After settling on a model, the narrator scans the barcode on the item using RedLaser ($1.99) to run a price check for other stores. Finding another store with a cheaper price, the narrator is linked directly to the Maps application for directions.Apple is continuing its rapid-fire release of new iPhone commercials, this time posting one entitled 'Shopper' to its iPhone ad gallery. The new ad again uses a narrative style to feature iPhone applications, demonstrating how an iPhone user could research espresso machines, ask for opinions from family and friends, and check prices.

Apple is continuing its rapid-fire release of new iPhone commercials, this time posting one entitled 'Shopper' to its iPhone ad gallery. The new ad again uses a narrative style to feature iPhone applications, demonstrating how an iPhone user could research espresso machines, ask for opinions from family and friends, and check prices.

lmmercial first features Safari, showing the mobile web browser accessing the iPhone-formatted version of ProductWiki to research various espresso machines before the narrator uses the Messages application to send MMS messages to his wife's sister for opinions on color. After settling on a model, the narrator scans the barcode on the item using RedLaser ($1.99) to run a price check for other stores. Finding another store with a cheaper price, the narrator is linked directly to the Maps application for directions.

China Unicom Continues Talking Up Wi-Fi iPhone

2011-03-27T09:08:00.000-07:00

PCWorld reports that China Unicom has officially acknowledged that it is in discussions with Apple to offer a Wi-Fi capable iPhone in that country.

Quote:

"I know that in the market there is hope we will offer an iPhone with Wi-Fi," said Chang Xiaobing, chairman and CEO of China Unicom, outside an event in Beijing. "We have been holding talks with Apple in this area."

Chang did not give a timetable for any release. When asked if the phone will come with WAPI, he said the phone will satisfy demands in the Chinese market.

The iPhone has been offered without Wi-Fi since its launch in China last October due to restrictions imposed by the Chinese government. Those restrictions were lifted several months prior to the iPhone's introduction, but Apple and China Unicom continued with their plans to introduce models lacking Wi-Fi connectivity. At the time of the iPhone launch there, China Unicom had expressed hope that Wi-Fi capable models could be introduced by the end of the year, but that did not come to fruition. A report surfaced in late January claiming that Foxconn had already begun producing Wi-Fi iPhones for the Chinese market, but it appears that that may not yet be the case.PCWorld reports that China Unicom has officially acknowledged that it is in discussions with Apple to offer a Wi-Fi capable iPhone in that country.

Chang did not give a timetable for any release. When asked if the phone will come with WAPI, he said the phone will satisfy demands in the Chinese market.

Wi-Fi phones in China are required to support the WLAN Authentication and Privacy Infrastructure (WAPI) security standard, and the iPhone would almost certainly have to adopt that technology in order to add Wi-Fi capabilities.

Wolfram Alpha App Price Drop, New Mobile Site, and Upcoming iPad App

2011-03-25T09:11:00.000-07:00

Wolfram Alpha, the company behind the online computational knowledge engine that was launched last year, announced today that the price of its iPhone app will be reduced to $1.99 from $49.99. Additionally, the company has launched a new siteoptimized for mobile devices.

The app's drastic price decrease and the availability of the new mobile site that can be accessed for free both serve to meet the company's new priority to "get Wolfram|Alpha in the hands of everyone." According to Managing Director Barak Berkowitz, the company aims "to democratize knowledge by giving people everywhere access to the amazing computational power and factual archive that is Wolfram|Alpha."

new priority to "get Wolfram|Alpha in the hands of everyone." According to Managing Director Barak Berkowitz, the company aims "to democratize knowledge by giving people everywhere access to the amazing computational power and factual archive that is Wolfram|Alpha."

Those who purchased the iPhone app [App Store] at its previous regular price of $49.99 or its sale price of $19.99 can request a refund via an online form through May 3. At its prior price of $49.99, the Wolfram Alpha app stood out in stark contrast to its web site that could be accessed from the iPhone for free, though it has still earned an overall customer rating of 3.5 stars in the App Store. Such a considerable permanent price drop has not been common in the App Store and the offering of this refund is notable for its timeliness and the forthright manner in which it is being offered.

Wolfram Alpha will also be launching a version of its app for the iPad on April 3, to be priced at $1.99 as well.Wolfram Alpha, the company behind the online computational knowledge engine that was launched last year, announced today that the price of its iPhone app will be reduced to $1.99 from $49.99. Additionally, the company has launched a new siteoptimized for mobile devices.

Wolfram Alpha will also be launching a version of its app for the iPad on April 3, to be priced at $1.99 as well.

Samsung TouchWiz

2011-03-24T18:43:00.001-07:00

Samsung Tochwiz is a stylish touch screen phone with slim & minimal design, 5 megapixel camera with auto-focus and Face detection, super-fast 3.5G connectivity. Avg Current Market Price:Rs. 14800

Last Updated On:September 22 2009
Place : Chennai Delhi Kolkata Mumbai Price (USD) $304.53 approx, Face detection, image stabilization, wide dynamic range

Radio card suitable for use on EGPRS/GPRS/GSM networks worldwide

2011-02-28T09:21:00.000-08:00

The Airtel brochure which guides me a quiet a good updates. Below are some of the more advantages.

High speed 24/7 Internet connectivity through Airtel EDGE network

No automatic disconnection unlike normal dial-up connections.

Connectivity to Internet when traveling in India or abroad so you save on high Internet charges on your hotel bills

Easy to install & simple to use with choice of tariffs to suit your needs

Send and Receive SMS via the Airtel Data Card

I had discusses on the advantages already before. But there is some difference in that. Here what Airtel wants to tell is the advantages on the 3G services no matter what you use a mobile or a data card. So that is quiet recommended to review properly. The DATA card is right now using a Airtel 2G/2.75G GSM services in India. It is just a plug and play device. There is no hassle in installation.

Taiwanese Thermalright announced a new range of heat sink top

2011-02-25T09:23:00.000-08:00

Fusion of eXtreme IFX-14 and Ultra-120. Thus, the manufacturer relies here on a total of six thick 6mm heatpipes, which take place in four rows of the blades. The radiant body made of aluminum, also finished with nickel treatment, presents a profile of the fins on the end of irregular shape and undulating, a choice that would, according to Thermalright, to optimize the effect of air in transit. The latter remember it by its jagged and aggressive design of the extreme strong IFX design of some earlier coolers from the same home and let the cooler contribute far less simple and easy as the Thermalright Ultra-120. As with the latter model, the edges of the individual, however, Finns again bent a few degrees up or down and so will the air more effectively guide you through the entire disk body. Also the cooler ground has undergone a major change, because that is the Venomous X, the first ever in the long history of thermal Rights, which was polished to a shine. During the performance, although this has not usually noticeable, but makes it at least looks pretty good stuff. Furthermore, tradition has, however, again the slightly convex base. Thermalright hopes to gain a better distribution of pressure in the center of the heat spreader of the CPU and hoped thus to increase the performance even further. At this point, opinions differ somewhat.

First Core i7 i5 and the graphics chip

2011-02-23T07:24:00.000-08:00

Sandy Bridge opens therefore a new version of turboboost. It is now a matter of overclocking (or "overclocking") of the total processor cores, even when they are used. Thus, provided that the processor is not too warm, the incidence of heart may temporarily increase when a software application of power, even if the TDP (thermal dissipation maximum value of the processor) is exceeded. Turboboost this may also apply on the graphics processor if the benefits do not exist. In other words, it becomes more effective in maximizing the chip.

Player you get pass the task by firewalls

2011-02-22T11:25:00.000-08:00

The action in Dead Space play two - three years after the events of part one - in a module like a Saturn moon destroyed assembled space station called "Sprawl" and the accompanying mine system. To this date, however, already been overrun by Necromorphs and how exactly it happened, the prequel to tell Ignition promises. But it does not. Instead, we follow two employees of the station (a mechanic, a security lady) on her right cobbled together arbitrarily acting flight, has to offer until the final scene, a kind of significant high point for series fans, yet delivers no explanation for the disaster on Sprawl. In between, you can set points between two alternative routes choose from, each of which cut scenes and mini games brings another, but ultimately the same end results and all the ways a totally irrelevant story zusammen flickr on. "New York Times" bestselling author Antony Johnston, despite neither the dialogue or the other activity here crossed by any nutritional value, which at the content side of a real right to exist would give this prequel.

Android operating system 2.2 (Froyo)

2011-02-21T07:27:00.000-08:00

Place your music in MP3 format your 5 megapixel photos, or your home videos can be found on the included 2GB mico-SD card, or, if you is not enough, the memory can be expanded to up to 32GB. Thanks to the built-in radio you can, no matter where you are, including at local and regional stations access. Together with a Bluetooth headset is Bluetooth A2DP listening to music, thanks to a special experience - you can stream your playlists just wirelessly to your headphones. The high-resolution 8.1 cm-sized displays can view videos of the finest quality, but also Web sites without having to scroll a lot, displayed properly.

A firewall is a software (as well as a hardware)

2011-02-20T21:26:00.000-08:00

A good firewall, during installation, does not have to tell you about the incompatibility of their drivers with the operating system. If this happens, you should think about why developers are spared the money for certification of their products. A good firewall should be able to work with Security Center Windows XP. Once installed, it must be able to disable the built-in firewall in Windows XP and you should not receive messages that your system is under threat due to the fact that there is no firewall installed.

Firewall is nice to "know" all the most popular applications and integrated services Windows XP, who should get access to the network and the Internet. You should not receive the message that Internet Explorer or Microsoft Outlook trying to access the Internet after installing firewall. Proper firewall will tell you that these applications access is granted automatically, and will disturb you only when a real threat. A good firewall should be fast. If the files are being copied across the network increased 2-fold after installing firewall, then this is a bad firewall. Such tardiness could be justified only by its ultra-reliable. At this point, you decide that you are important. Safety - it is always a balance between convenience and reliability. To choose for themselves.

iPod Touch and iPad users’ saw great potential for their Touch devices

2011-02-18T19:28:00.000-08:00

With one hand to manage the other character and the camera can be rotated freely during times of exploration. When we have to trigger certain devices or converse with secondary characters, a button becomes visible on the display. It is very clear experience of Gameloft in the design of touch-screen controls. The battles have a very attractive learning curve and are controlled with menus preferably positioned on the screen. The only trouble is that it is too simple to win battles, even if we fight a final boss.

In the battles of Eternal Legacy, you can attack by use your skills such as invocations, magic and special moves, and magic potions that improve life. You can also connect certain objects to weapons and equipment to improve its characteristics. Only control the actions of Astria, the protagonist of the adventure, and perhaps this is the feature that lowers the complexity of combating, since the only thing we can do with the other members of our team will advise to assault or heal the rest of team, but is the AI of the game that will make a decision whether to pursue your advice or not.

The Motorola Backflip has a good reception quality,

2011-02-18T09:29:00.000-08:00

Supported networks - WCDMA: 900,1900,2100; GSM: 850,900,1800,1900; HSDPA 7.2 Mb / sec. (Category 7 / 8), EDGE Class 12, GPRS Class 12 HSUPA for fast uploads is missing.

2. Data transfer - Bluetooth ® 2.0, Profiles: GAP, HSP, SPP, WiFi 802.11b / g, USB 2.0, aGPS. No Bluetooth 2.1 and certainly not a 3.0 is supported. Wireless-n is missing, only the slower b and g standards are supported.

3. Reception and voice quality - The Motorola Backflip has a good reception quality, even if the network once covered is not the best. The voice playback sounds good, thanks to noise reduction (two extra microphones exist) which is quite natural.

4. Voice quality of the speaker - At medium volume, the voice reproduction is not fully understood. At maximum, however, voice is slightly scratchy.

5. Battery life (with normal use) - 3 Days.

6. Storage capabilities of Contacts - First name, last name, second first name, last name, suffix, first name (phonetic), Second first name (phonetic), last name (phonetically): Telephone: Private, Emails: private; IM: AIM; address: Privacy: Street, City, State, Zip Forward direct to your voicemail, birthday, anniversary, nickname, website, notes, ringtone; PO Box, region, city, state organizations: Office: Company, Title: additional title on / off, display group: Create a new group, all contacts , service numbers, favorites, address book.

CLP-300 Colour Laser Printer

2011-02-15T20:30:00.000-08:00

The footprint is 39 x 35 for a color laser printer is quite small and similar to an inkjet printer and the medium quality. With nearly 14 kg of a color laser printer is very easy, however, much heavier than a comparable inkjet printers. It is operated via the corresponding menu of the computer after installing the driver. The corresponding icon sets in the status bar of your computer. It can be accessed through a double, so that appropriate settings for the printer or drivers can be made and also the respective toner can be queried. A call is also available through the context menu.

As already mentioned, access to the toner cartridge on the front cover is quite easily possible, which makes changing the cartridge clear. Also on the front door, access to the waste toner container, which lies at 8.00 EUR in the ordinary course. It extends for approximately 5000 pages black and white or 1200 color print page.

Even cleaning the refrigerator by removing the pressure unit is on the way, which facilitates handling but in my opinion clearly. The imaging unit of the printer to about 20,000 sheets b / w and 50 000 sheet designed in color and can be changed by the user, but this is making at a price of 150 EUR up no users, since this was more, at least for me, as I for the units have paid for. In that regard, so you can find something heretical, that the printer has a life expectancy of more than 20,000 sheets. The internal memory is 32 MB RAM, and this also extends fully out of household or single-user operating normally.

VoIP and Instant Messaging on mobile phones.

2011-02-14T09:31:00.000-08:00

Allows calls low fares, especially useful for international calls. As for the version accessible via the Web, you are called by Jajah and made contact with the recipient of the call. Software available for Symbian or Java can initiate a Jajah call directly from the phone book, just visit mobile.jajah.com through an alternative browser installed on your phone, enter the destination number and click call. You are called back immediately on the phone or on any other number that can be saved as the default (eg that of a hotel).

Category: Callback / Hybrid

Platform: Java, Symbian, Web, Blackberry (Talk-Now)

Cost: Traffic data to initiate the call via the Web, or you can send a text message.

Advantages: Easy to use, affordable rates, SMS feature that allows you to start a call without a data connection.

Fring

Fring VoIP software is a complete instant messaging and presence. It allows users to call Skype, Google Talk, MSN, users of fixed telephony services and VoIP SIP (just register your account Skype, Messagenet VoIPStunt or that of any other operator). The latest version for Nokia E Series and N Series allows you to use WiFi connections and UMTS (also available a version for other Nokia phones that do not feature WiFi). It’s a real P2P VoIP client; compatible with leading VoIP service is client-server architecture, however, ensured that the Fring server leaves the heavy task to interconnect VoIP calls with the main network.

Type: VoIP client

Platform: Symbian

Costs: Data connection (3G), we recommend a flat. No cost if you use a WiFi network.

Advantages: Complete VoIP client, instant messaging, compatible with popular software Voima, ability to use any operator for SIP VoIP calls to conventional phones

The EU-funded initiative, called VISION Cloud – Virtualized Storage Services

2011-02-12T10:31:00.000-08:00

The explosion of personal and enterprise digital data has been specifically recognized as one of the most significant characteristics of the decade. According to one estimate, 150 exabytes (billion gigabytes) of data were generated in 2005. It is estimated that this year, 1,200 exabytes will be produced. Additionally, the explosion of raw data and the dependence on data services is expected to be further amplified due to the strong proliferation of data-intensive services and the continued digital convergence of telco, media and information technology.

"The world is generating data faster than we can store it," explained Kristof Kloekner, IBM VP Strategy & Enterprise Initiatives, Systems & Software & CTO Cloud, "and we've become critically dependant on services that can extract valuable information from the data and help drive better decision making. By optimizing delivery of data-intensive storage services, VISION Cloud will usher in a new era of more flexible, scalable, and secure cloud storage that can be delivered in a pay-per-use model."

Over the last three years, IBM has been actively developing technologies related to cloud computing across its server, software, services and R&D units. Presently, IBM's cloud portfolio includes offering such as IBM Smart Business Development and Test Cloud, IBM Smart Analytics Cloud and the IBM Smart Business Storage Cloud. These offerings allow enterprises to access advanced capabilities over the cloud. The VISION Cloud represents a new initiative, led by IBM Research, to further advance cloud computing technology, making it easier and less costly to develop new data intensive services that provide security and guarantees for quality of service.

"Users now require capabilities that are far richer than simple raw bits and basic storage," noted Dr. Hillel Kolodner, IBM Haifa researcher and lead architect for VISION Cloud. "To satisfy this need, the focus must shift to the data---where the collections of bits are semantically meaningful and have associated metadata. Data should be a first class citizen, where its importance is comparable to the computing power itself. With VISION Cloud, our aim is develop the infrastructure to support this prominence of data and data-intensive services."