Wilcom User Manual Supplement

Mood Enhancers and Party Herbal Enhancements on Sale

noreply@blogger.com (Lata) — Sun, 08 Jan 2012 18:05:00 +0000

Mood and Party Enhancers are available at Herbal City LLC. Do you want to get the truly amazing experience with a better night's sleep than before, or the products that you can use to improve your mood and soul, Herbal City™ LLC have the product you are looking for. The K6 herbal incense, herbal alternatives, sleeping pills, and Spiritual powders or even the sexual enhancement.

This product is actually easy to get everywhere, but we can guarantee that the Spiritual powders for example, can keep you out of a bad mood or unwanted and unnamed felling and help through a normal day with without the slightest resistance. You will be more confident, so it can improve your well-being.

These kind of product are often used to prevent the depression and other negative emotions such as guilt, worthlessness which can certainly be improved with this product as an adjunct to mood. Start the Party! Get it now! One thing you should remember, that they are not a form of long-term treatment. If the problems get worse, consult your doctor immediately.

Sexy Asian Girl

noreply@blogger.com (Lata) — Mon, 18 Jul 2011 05:28:00 +0000

If you have a Chinese girlfriend or fiancee, or wonder what is the best kind of woman for whom you want, then I'm here to tell you some good news: Chinese women are great, better than any other kind of women I've ever dated, but decreases right and marry her is a whole other story. You can find lots of asian girl models that will restore your sex drive started dying for years.

The benefits of joining them is in fact, that you get the ease of establishing this such love with girls from Asia through ebooks that you can simply get from the site. Restore your passion now!

Emergency Carpet Cleaning

noreply@blogger.com (Lata) — Fri, 15 Jul 2011 18:08:00 +0000

It might be your carpet becomes so dirty and dusty, damaged and requires maintenance as soon as possible? Whether it's a big project or just regular care and maintenance, you need carpet cleaning done right.

They keep a collection of carpet in a dry place. If the damp carpet can be damaged or perforated, perforated. Take care of insects and rodents. Carpets with a round shape for a round-table is usually in place in the foyer in the middle of the room. Carpet with a square shape to the room with sofas and chairs in the room or under the dinner table.

How To Sell Gold

noreply@blogger.com (Lata) — Tue, 15 Mar 2011 15:15:00 +0000

Want to know how to buy and sell gold? You might find the promises of 'cash for gold' in many places, but when it's comes to sell gold, you have to be careful, find as much information about it. Obviously, you want to have sort of -let's say- big money when you sell gold jewelry and other gold items, don't you? You must be realistic with the current gold price its self. Looking for someone who wants to buy gold won't be that difficult, but getting a good price for your gold is in dire need of time and careful planning and appropriate. You should also know how to invest in gold as well as all related to it.

You should know that gold will become the cash if you sell them as bullion or something. SilverAndGoldExchange.com can give you all kind of great tips on how to sell gold. They definitely will help you learn about getting the gold a good price, how to sell gold coins, jewelry and stocks, as well as how to know when you should sell it in the most appropriate occasion for you.

Sell gold in form of bars or coins issued by the government is actually quite easy because the gold bars and coins come in standard weight, as I quoted from their website. A gold bar stamped with a number indicating its purity, .999 or .995. They will absolutely give you the certificate of authenticity from the transaction you are doing over there. They provide priority delivery of mail up to $ 5000 per package that can be easily tracked, while other providers on the internet only able to provide $ 100 insurance that can not be traced. Interesting?

In essence, they offer an online calculator that automatically pull in the latest prices for gold, with any other stuffs they certainly can make your gold sales transaction becomes very easy. So jump to the site right now guys! :)

Britta Water Filters - Portable, solid, and Efficient

noreply@blogger.com (Lata) — Sat, 26 Feb 2011 16:20:00 +0000

Thanks to the slim design, made of solid materials, Britta water filters can be stored in a small space like in a room that is on the refrigerator door, so of course we can avoid the hassle and without sacrificing our room that you usually could have been used for other purposes.

Although its size is simple, concise, and look cute, this pitcher has the ability to lift 40 ounces of liquid water, this is equivalent to five glasses of 8 ounces. This sleek design makes it easy if we have to do the transport, recharge, and then pour water into it.

In the case of our treatment, it is also very easy to handle. And one of my favorite features of this product is dial buttons that can tell me when should I replace filters and so forth (this is just because I'm not that kinda guy and because I was usually don't remember when last time I filled it.. :p)

Plumbing Sales and Service

noreply@blogger.com (Lata) — Sat, 26 Feb 2011 15:57:00 +0000

You should know that such thing like water heaters and boilers will not last forever, and when they need to be repaired or replaced, you as the owner would need to request a service plumber, aren't you.

Plumbers can usually provide good service and repairs even able to give advice about new water heater and boiler to replace the old system. Plumbing services are fit to give advice on the latest and best technology to ensure you have a new water heater or whatever it is in a way as efficiently as possible.

24hr family plumber can make great recommendations about what your individual needs, based on what they look directly at the location where you live or at your office. They also can provide maintenance service to replace the goods that have been damaged by the most efficient way to fit all your needs.

Marvelous iTunes Gift Card

noreply@blogger.com (Lata) — Mon, 03 Jan 2011 07:59:00 +0000

Hey you all iPhone, iPod or iPad-licious, you certainly want to have a collection of this lovely additional applications? The application is provided by Apple. www.zhljerry.com is the place where you will get most comfortable shopping online and secure. Get attractive offers such as iTunes Gift Card.

www.zhljerry.com has done much to try and get something appropriate for the consumer electronics. With iTunes as your iPod music store, you can create your own digital music library. This marvelous new technology enables you to listen to the music anywhere, anytime.

This one has the ability to create customized audio CDs and download music to your Apple iPod portable digital music player. It also has the ability to mix classical, rock, country, rap, or other music that you want to have in your collection.

Breast Feeding Chubby

noreply@blogger.com (Lata) — Sat, 01 Jan 2011 09:48:00 +0000

Hey ladies.. perform a sort of maintenance on your baby -like nursing, for example- in public area can be a challenge for all women, but especially for women with larger breasts. However, in my experience, larger breasted women are more difficult to breastfeed than women with small breasts.

Many people assume that mothers with larger breasts comparing with the other mothers will produce more milk, have a supply more than the average female. This is obviously not true.

Breast cleanliness is very very important. That is why the women who have bigger breasts than others, always feel this constraint. This is usually attempt because they did not notice that the bra that they use during pregnancy or while nursing. They tend not to care about this one. It's time for you all ladies to live a healthy life. Use the right product for you. Use the plus size nursing bras that is also appropriate for your needs.

Best portable table saw

noreply@blogger.com (Lata) — Fri, 31 Dec 2010 12:55:00 +0000

The first thing you have to consider when you want to buy a table saw, whether portable or not, is the accuracy and the subtlety of its work. If you really need this tool, especially a portable one, the thing that you can take it wherever you like, please.. read first the reviews about it on the www.portabletablesawhq.com as a reference. You must be interested and will not waste your time.. then you can buy them online.

The design of the rack-and-pinion lets you generate microadjustments quickly and accurately. Because this is portable, then this tool is very easy to handle and safe to transport. Well... I don't know... Maybe I was not very able to describe in detail about this cutter tool, but in general, I can say that this is very safe, so you can avoid the accident when you work using it, especially on the part of your knee, because portable table saw is designed in such a way that you will not get in trouble much less serious accidents because of it.

Please.. Do read the review of this portable cutting tools, I can say without hesitation you will not be disappointed because there are so many different types of it f or your choices.

Russian Brides Await!

noreply@blogger.com (Lata) — Wed, 22 Dec 2010 08:59:00 +0000

Are you looking for your Russian brides dream of this day! Russian Brides is the perfect place for you to correspond with ease. Simply fill out your profile there. It's all for FREE! Then you can receive mail from the woman's beautiful today. You may be able to fit with just a few clicks away.

There are thousands of Russian women who want to find true friendship and possibly become your partner forever and ever. With the support of innovative services such as Email, Live Streaming Video, Personal Video Profile, and Live Chat, find the perfect partner with Mail Order Brides for you right now is a lot easier than you think!

What are you waiting for? To begin the relationship with a truly beautiful Russian woman, click that two provided links in this post!

Magnetic Sponsoring - A Silver Bullet

noreply@blogger.com (Lata) — Wed, 22 Dec 2010 06:50:00 +0000

Magnetic Sponsoring by Mike Dillard -as you can see on Mike Callahan's site- has really taken over the network marketing industry on a large scale in recent years. I will admit that for the first time I hear it.. I was among those who are skeptical.. I mean, how could it be claimed that everything would be obtained very easily as many have written on the internet.

So what exactly did you learn in this program?

You see, basically, there is an attraction in the field of marketing that is so strong against the value you offer and the prospect you given. The more valuable you are, the more generate attraction, although only some certain people who will buy your product or join you becoming your downline or whatever.

"Serving" probably could be the perfect reference or best keywords that we should keep in business. You will fundamentally change and improve dramatically, and you'll get your chance as a real businessman. But ultimately your success depends on your own, not others....

High quality Hunter Boots from Country Attire

noreply@blogger.com (Lata) — Wed, 25 Aug 2010 18:35:00 +0000

If you wish to go around Europe, do not forget a little thing like your gear, especially shoes. Boots that can make an alternative if the weather is going to weigh on your face. For that reason, just go to www.countryattire.com. On the main page, you will be able to compare the product you want from the category list exists. Once you choose one, all the list of similar products following descriptions of each product in detail will be available. For the kind of size selection, you can get it by the help of its drop down menu.

I bought the hunter boots one. Proved to be extremely practical style and made with very skilled and careful handing in every details. I wore a pair of hunter wellies that turned out remarkable work as a very comfortable heated! There's plenty of leg room to stretch, too. They would be great to wear!

Guys, you can try the beautiful white classic hunter wellingtons that has become a fashion icon today if you'd like. Wear this product on winter vacation in Europe. Really sniper tricks if you intend to France because there's so many snow precipitation at this time. In the UK there are a lot of snow will not melt down. But of course I'll be fine, because my foots stay warm and dry all the time.

Why Should Use LED Grow Lights?

noreply@blogger.com (Lata) — Thu, 29 Jul 2010 13:45:00 +0000

Good lighting to brighten up you home and garden. Good lighting can add beauty outside your room is also good for your plants. Today, people is really care about the environment, and using LED Grow Lights become more efficient and more popular.

LED Grow Lights have very low power consumption. Landscape lighting lamps use about 10 percent of the power halogen lamp. In addition, LEDs are free of the dangers of mercury and other hazardous chemicals. Therefore, use the LEDs for your garden so that we can really help save the planet.

By joining myhydroponicgardening.com and with their best LED Grow Lights, it is an excellent choice for outdoor lighting. There are various designs and styles that suit your needs. Light comes in different voltages, so you need the correct lighting, color and intensity to find their own needs.

Consider LED Grow Lights if you're looking for organic ways for your estate needs. Landscape lighting and energy efficient lighting would save lots of money because of their long life.

Adjusting needle height values

noreply@blogger.com (Lata) — Fri, 23 Jul 2010 08:53:00 +0000

The needle height controls the height of the loop formed by the Chenille machine when it is sewing a Moss stitch, and the width of the Chain stitch.

Some machines allow needle height control only at the machine. The Melco Chenille machine uses 26 different needle height positions, which are designated A through Z. Height A is the lowest - 0.0100’, Z is the highest - 0.3225’. Each successive letter is 0.0125’ higher than the preceding letter. The actual needle height measurement is a distance from upper surface of the needle plate to the inside of the needle hook.

You can insert Needle Height functions and select the positions during digitizing. The Melco tape file format has specific codes assigned to each needle height position.

To adjust needle height values

1. Click Needle Height.

The Needle Height dialog opens

2. Select a needle height value from the list.
3. Click OK.

Note : While stitching a design, the Melco Chenille machine will automatically change the needle height according to your selection. To use the needle heights selected in the design, select the Explicit checkbox in the Machine Format Values dialog.

Outputting designs to Chenille machines

noreply@blogger.com (Lata) — Thu, 01 Jul 2010 08:52:00 +0000

Chenille designs can be output to an embroidery floppy disk, can be punched to a paper tape or can be sent directly to an embroidery machine if connected to the computer. Select the correct machine format before sending the design. Check the following values before sending the design.

Outputting designs to Tajima Chenille machines

There are two types of Tajima Chenille machines. The old multistop TMCE-100 machine uses different combinations of multiple Stop Codes and Empties for Chain, Moss and Needle Height functions. The new Tajima TMCE-600 Chenille machine only uses single Stop Codes for switching between Chain and Moss stitching.

Supported Chenille machines

noreply@blogger.com (Lata) — Sun, 27 Jun 2010 08:42:00 +0000

Wilcom ES Chenille supports Tajima, both the old TMCE-100 and new TMCE-600 models, Barudan and Melco Chenille machines.

As with lockstitch designs, Wilcom ES Chenille stores all the information about a design in the EMB no matter to which machine the design is output making it easy to write designs in different formats.

Tajima Chenille machine functions

The Tajima Chenille machines have three functions — Chain, Moss and Color Change. The Tajima code system does not have specific codes assigned to these machine functions; each Tajima Chenille machine uses different combinations of empty stitch and stop codes to indicate these machine functions. Wilcom ES Chenille provides machine formats for both Tajima
Chenille machines.

The TMCE-100 model uses different combinations of multiple stop codes and empty stitch codes for the chain, moss and needle height functions. As each Chenille function is coded differently, this machine can recognize them. The TMCE-100 machine is often referred to as the ‘multi-stop’ Tajima Chenille machine.

If you intend to stitch a design on one of these machines, make sure that you select the ‘Tajima Chenille multi-stop’ machine format. The chain, moss and needle height functions will be automatically converted to the correct combinations of empty stitch and stop codes used by these machines.

The Tajima TMCE-S Chenille machine only uses single stop codes for switching between chain and moss stitching. These machines cannot distinguish between the functions, so you need to select a function for each stop at the machine, in the same way as you select needle numbers for color stops.

If you are using one of these machines, select the Tajima Chenille TMCE-600 machine format. Each chain, moss and needle height function will be output as a single stop code.

Condition file

When using TMCE-600 format and saving a design as a DST file, a condition file (*.cc0) is saved alongside the design. This file contains information that the machine can read so that the setup process is partially automated.

Setting the Start of Design/End of Design sequence

noreply@blogger.com (Lata) — Wed, 23 Jun 2010 08:51:00 +0000

In addition to any End of Design function, some machines require extra Empty Stitches and Empty Jumps in order to stitch the start and end of a design. Other machines require a Stop function. Depending on the machine type, you may also require commands to initialize the machine or trigger the frame out exit after stitching.

Note : Remember that these fields show the number of extra codes you want to insert in addition to the default values.

When starting with Chain stitching, an empty stitch (non-data) code will automatically be inserted at the start of the design. When starting with Moss stitching, an empty stitch (non-data) and a stop code will be automatically inserted at the start of the design.

Do not digitize two Empty Stitches at the beginning of the design, as this will affect registration. Avoid using Empty Stitches elsewhere in the design. Other Tajima Chenille values are the same as the standard lockstitch Tajima machine values.

To set the Start of Design/End of Design sequence

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. Click the Advanced tab and enter the Start of Design sequence.

! In the 0:0 Jump field, enter the number of Empty Jumps to insert at the start of the design.
! In the 0:0 field, enter the number of Empty Stitches to insert at the start of the design.

3. In the End of Design panel, enter the end of design sequence.

! In the second 0:0 Jump field, enter the number of Empty Jumps to insert at the end of the design.
! In the 0:0 field, enter the number of Empty Stitches to insert at the end of the design.

4. Click Save.
5. Click OK.

Adjusting advanced machine format settings

noreply@blogger.com (Lata) — Mon, 21 Jun 2010 08:42:00 +0000

The Advanced tab lets you set additional machine format options. Again, the available settings depend on the selected machine format. You can set the color change sequence, and insert special codes for the start or end of a design.

Warning : Only change Advanced values if you are familiar with the codes used by your embroidery machine.

Setting the color change sequence

Some machines cannot interpret Color Change commands unless they form part of a ‘color change sequence’ made up of Empty Jumps and Empty Stitches before and after each Color Change command. Check the requirements of your machine to determine whether you need to enter color change sequence values.

In the Advanced tab, the Color Change Sequence panel reads from top to bottom, in the order the codes appear in the sequence. The first two fields show the number of Empty Stitches and Empty Jumps to insert before the Color Change command. The other fields show the Empty Jumps and Empty Stitches to insert after the command.

To set the color change sequence

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. Click the Advanced tab and enter the Color Change sequence.

! In the first 0:0 field, enter the number of Empty Stitches to insert before the Color Change.
! In the first 0:0 Jump field, enter the number of Empty Jumps to insert before the Color Change.
! In the second 0:0 Jump field, enter the number of Empty Jumps to insert after the Color Change.
! In the second 0:0 field, enter the number of Empty Stitches to insert after the Color Change.

3. Click Save.
4. Click OK.

Setting borer functions

noreply@blogger.com (Lata) — Sun, 13 Jun 2010 08:42:00 +0000

Some embroidery machines are equipped with a borer. The borer often replaces one of the needles. You need to specify the needle position of the borer and its offset value. Borers are often ‘knife’ attachments where the cutting position is offset 12 mm from the main needle. Before the machine starts, the frame moves so that the borer is in the correct position.

This extra frame movement compensates for the borer offset. Some machines automatically adjust for this offset when a Borer In function is encountered. These machines should have an offset value of 0. Similarly, if you are using a boring needle (instead of a knife), you do not need an offset value.

To set borer functions

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. In the Standard tab, enter the required borer offset in the Offset field.

! If your machine automatically enters an offset when a Borer In function is encountered, enter an offset of 0 mm.
! If your machine requires an offset value, enter an offset of 12.0 mm.

3. Click Save.
4. Click OK.

Selecting explicit needle height

noreply@blogger.com (Lata) — Mon, 07 Jun 2010 08:42:00 +0000

You can choose to use the needle heights selected in the design or select the needle heights manually on the machine.

To select explicit needle height

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. In the Standard tab, select the Explicit Value checkbox to use the needle heights selected in the design. Clear the checkbox to select the needle heights manually on the machine.

3. Click Save.
4. Click OK.

Setting trim functions

noreply@blogger.com (Lata) — Thu, 03 Jun 2010 08:42:00 +0000

With some machine formats you can specify how to format and interpret trim commands. Some machines understand specific trim codes. Other machines interpret multiple jumps as a trim command. Machines without an automatic trimmer may not know how to interpret trim commands, and may even shift the design when a trim code is encountered.

For these machines you need to deselect the Output Trims checkbox so that trim functions are ignored when the design is stitched.

To set trim functions

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. In the Standard tab, select the Output Trims checkbox to include trim functions when outputting to the selected machine format.

Note : If you deselect the Output Trims checkbox, the trim functions are not removed from the design but simply ignored for the selected machine format.

3. Specify the trim function format to use:

! Jumps: for machines that interpret multiple jumps as trims. You also need to enter the required number of jumps.
! Code: for machines that use specific trim codes.

4. Click Save.
5. Click OK.

Adjusting shortcut angle values

noreply@blogger.com (Lata) — Thu, 27 May 2010 08:42:00 +0000

Some Chenille machine types require that the angle between one stitch and the next is not very sharp — e.g. Tajima Chenille machines require it to be at least 60º.

The Chenille Shortcut Angle avoids sharp changes in stitch direction during Chenille stitch generation. This filter operates only on Chenille stitch types and has no effect on lockstitch stitch types. Wilcom ES Chenille automatically applies the shortcut angle to all cover stitches inside an object.

However connections between travel stitches and offsets and fills are not always checked. Also, the shortcut is not applied to connecting stitches and jumps between objects.

Tip : A design checker is provided to identify Chenille Shortcut Angle violations. The design checker is activated by hot key Ctrl + K. The stitch cursor will jump to the first stitch which violates the Chenille shortcut angle. You must correct this problem by stitch editing. Press the hot key combination again for the software to detect any problems further into the design.

Note : Jumps in Chenille stitching after changing shortcut angle or minimum stitch value are no longer present.

To adjust shortcut angle values

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. Enter Shortcut Angle value.
3. Click Save.
4. Click OK.

Get Healthy Life with OXIS

noreply@blogger.com (Lata) — Tue, 25 May 2010 16:03:00 +0000

Oxis? What is that? OK. Let me say something about this http://www.oxis.com. Therapeutic products Oxis [nutraceutical] products, and cosmeceutical products and personal products and medical products developed at home and abroad to grant licenses to pharmaceutical companies and biotechnology, such as candidates for drugs.

Oxis window on the development and plans to sell and display products and believed [nutraceutical] Cosmecuetical natural ingredients that have beneficial effects on human health. It will be the first product include window Oxis L - Ergothioneine (Ergo), which is a very powerful, and versatile antioxidant.

Being evaluated other products, including product lines of skin care. In addition to setting another window Oxis nutrients and functional foods such as bars and nutrition, energy drinks and the images are not only lead to provide traditional retail distribution itself.

Visit also these links :

http://www.oxis.com
Oxis on Twitter
Oxis on facebook

Adjusting standard machine format settings

noreply@blogger.com (Lata) — Tue, 25 May 2010 08:38:00 +0000

Different machines require different settings. When you select a machine format, you only modify values relevant to that machine. Typical modifiable values are maximum and minimal stitch and shortcut angle values.

Chenille Shortcut filters are provided to avoid small stitches and sharp changes in stitch direction during Chenille stitch generation. These filters operate only on Chenille stitch types and have no effect on lockstitch stitch types.

Note : Non-EMB embroidery format Chenille designs can be shortcut-checked when opened into Wilcom ES Chenille by clearing the Outlines/Objects checkbox.

Adjusting minimal stitch values

The Chenille Minimal Stitch and Shortcut Angle avoid small stitches during Chenille stitch generation. This filter operates only on Chenille stitch types and has no effect on lockstitch stitch types.

Note : Jumps in Chenille stitching after changing minimum stitch value are no longer present.

To adjust minimal stitch values

1. Access the Machine Format Values dialog.

Note : Only fields relevant to the selected machine format will appear.

2. In the Standard tab, enter the Maximum Stitch value. The value you enter depends on the tape code used by your machine:

! Binary System: 12.7 mm
! Ternary System: 12.1 mm.

3. In the Minimal Stitch field, enter the smallest stitch to allow when outputting to the selected machine format.
4. Click Save.
5. Click OK.

Removing custom machine formats

noreply@blogger.com (Lata) — Sun, 23 May 2010 08:38:00 +0000

You can remove custom machine formats from your system when they are no longer required.

To remove custom machine formats

1. Access the Select Machine Format dialog and select a machine format to remove.

Note : You cannot remove machine formats that come with the software. You can only remove a custom format which you created.

2. Click Remove.

A confirmation box appears.

3. Click Yes to confirm the deletion, then click OK.