Autos, Motorcycles & Planes How-To Videos & Articles « Wonder How To

How to find out what your car is trying to tell you when the check engine light is on

Fri, 14 Jan 2011 23:06:22 GMT

When your car turns on, the computer under the dashboard runs a quick diagnostic of your car. If a problem is detected, the check engine light will turn on. Here is how you can diagnose your car to determine what has gone wrong, and how you can fix it.

Watch the how-to video for How to find out what your car is trying to tell you when the check engine light is on on WonderHowTo.

Related:

How to easily remove scratches from the paint job on your car

Fri, 07 Jan 2011 17:57:09 GMT

If the paint job for your car or truck has been lightly scratched, this tutorial shows you how to use Scratch Out to remove scratches. Make sure you do this in the sun, and remember to reapply your coat of carwax after you're done.

Watch the how-to video for How to easily remove scratches from the paint job on your car on WonderHowTo.

Related:

How to replace leaky clutch hydraulics on a Honda Civic

Wed, 05 Jan 2011 21:34:20 GMT

If the clutch hydraulics on your Honda Civic are leaking, you might find your clutch stuck on the floor. Here is how you can check to see if you have a leak, and then how to fix it if you find one.

Watch the how-to video for How to replace leaky clutch hydraulics on a Honda Civic on WonderHowTo.

Related:

How to replace the hydroboost unit on a Chevy Astro van

Wed, 05 Jan 2011 21:34:08 GMT

If your Astro van is performing poorly (or perhaps not at all), one solution is to replace the hydroboost. Fix your power brakes and power steering with a new hydroboost. You'll need some moderate familiarity with auto mechanics to do this.

Watch the how-to video for How to replace the hydroboost unit on a Chevy Astro van on WonderHowTo.

Related:

How to fabricate and install passenger side bracing in a stock race car

Wed, 05 Jan 2011 18:41:49 GMT

Follow along in this instructional video as Jeri Ellsworth demonstrates how to fabricate and install the passenger side bracing on dirt track racecar being built from a 1981 Camaro. The materials and tools needed for this project include a 1 3/4 x .120 tubing, an "Affordable Bender" bender, a Millermatic welder and a Hypertherm 43 plasma cutter.

Watch the how-to video for How to fabricate and install passenger side bracing in a stock race car on WonderHowTo.

Related:

How to fabricate and install the halo and window post in a stock car

Wed, 05 Jan 2011 18:41:39 GMT

Learn to fabricate the halo and window posts with some tubing and a Millermatic welder into a dirt track racecar being built from a 1981 Camaro. The materials and tools needed for this project include a 1 3/4 x .120 tubing, an "Affordable Bender" bender, a Millermatic welder and a Hypertherm 43 plasma cutter.

Watch the how-to video for How to fabricate and install the halo and window post in a stock car on WonderHowTo.

Related:

How to fabricate and install door bars in a stock car

Wed, 05 Jan 2011 18:41:32 GMT

Fabricate and build door bars (aka sissy bars) for a full tube chassis 1981 Camaro racecar by following along in this instructional video with Jeri Ellsworth. The door bars are being built for a very rugged car, designed to withstand a large amount of side impact. Tools and materials needed for this project include 1 3/4 x .120 tubing, an "Affordable Bender" tubing bender, a Millermatic welder and

Watch the how-to video for How to fabricate and install door bars in a stock car on WonderHowTo.

Related:

How to fabricate and install a roll bar in a stock car

Wed, 05 Jan 2011 18:41:25 GMT

Learn how to fabricate and install a rollbar into a 1981 Camaro being converted into a racecar. In this video, Jeri Ellsworth bends and cuts tubing into a rollbar and welds it into place. Tools and materials needed for this project include 1 3/4 x .120 tubing, an "Affordable Bender" tubing bender, a Millermatic welder and a Hypertherm 43 plasma cutter.

Watch the how-to video for How to fabricate and install a roll bar in a stock car on WonderHowTo.

Related:

How to tie subframe rails together in a stock car

Wed, 05 Jan 2011 18:41:14 GMT

Learn how to tie subframe rails together with a Millermatic welder as this 1981 Camaro gets rebuilt into a racecar. In this video, Jeri Ellsworth welds the rails and shows proper preparation and technique. Tools and materials needed for this project include 1 3/4 x .120 tubing, an "Affordable Bender" tubing bender, a Millermatic welder and a Hypertherm 43 plasma cutter.

Watch the how-to video for How to tie subframe rails together in a stock car on WonderHowTo.

Related:

How to determine if you should buy an electric car with Electric Car Calculator

Wed, 05 Jan 2011 18:25:52 GMT

Are you thinking of trading in your 6mpg Hummer for something a little more efficient? Well, if you've got an electric or hybrid car in mind, this video will show you how to make a choice that works for you. With a little program called Electric Car Calculator, you can determine if the savings are worth it for you to get into one of today's hybrid or electric cars.

Find Electric Car Calculator [h

Watch the how-to video for How to determine if you should buy an electric car with Electric Car Calculator on WonderHowTo.

Related:

How to prevent or fix your car when it begins to accelerate unintentionally

Tue, 04 Jan 2011 20:43:56 GMT

Does your car sometimes accelerate when you don't intend for it to do? Depending on if your car is late or early model, the culprit could be one of several things. Here's how to figure out what causes it, and more importantly, how to make it stop.

Watch the how-to video for How to prevent or fix your car when it begins to accelerate unintentionally on WonderHowTo.

Related:

How to change the automatic transmission fluid on your car

Tue, 04 Jan 2011 20:43:51 GMT

You don't have to pay a mechanic to change your automatic transmission fluid, you can do it yourself at home! This video shows you how to execute a perfect fluid and filter change on your car or truck at home.

Watch the how-to video for How to change the automatic transmission fluid on your car on WonderHowTo.

Related:

How to install a combination DVD player and Sat-Nav in your BMW

Fri, 31 Dec 2010 01:12:22 GMT

This tutorial shows you how to install a fun new toy in your BMW - a combination DVD player and sat-nav/gps system. You'll need a few parts you can get from any BMW dealer as well as a few basical hardware tools.

Watch the how-to video for How to install a combination DVD player and Sat-Nav in your BMW on WonderHowTo.

Related:

How to disable the safety belt warnings on the 2010 Chrysler Town & Country

Wed, 22 Dec 2010 00:25:55 GMT

While safety belt warnings are there for a reason, the constant sound of "ping, ping, ping" can get pretty annoying. If you'd rather not deal with the constant reminders, check out this video to learn how to disable the warnings on your 2010 Chrysler Town & Country. Be warned - this modification may be illegal in your state, so proceed with caution.

Watch the how-to video for How to disable the safety belt warnings on the 2010 Chrysler Town & Country on WonderHowTo.

Related:

How to install an iPad in your car

Wed, 08 Dec 2010 21:30:49 GMT

The iPad is the king of the tablet PC's. One of the reasons tablet PC's are so awesome is that their thinness and lack of folding allows them to be used in positions where normal computers and even netboooks cannot. This, it turns out, makes them perfect for installing in car! This video will walk you through the process of installing an iPad into the dash of a car, which is pretty freaking baller

Watch the how-to video for How to install an iPad in your car on WonderHowTo.

Related:

How to build the Neurotikart, a really fast electric go-kart

Wed, 08 Dec 2010 19:41:41 GMT

Does an electric racing go-kart sound like something you could have in your life? We thought so too. This video will walk you through how one man built what he calls the Neurotikart, an insanely fast DIY electric go-kart that will thrill you without making you cough up two-stroke fumes for a week afterwards.

Watch the how-to video for How to build the Neurotikart, a really fast electric go-kart on WonderHowTo.

Related:

How to fix trouble code P0141, the rear oxygen sensor, on a Dodge Neon

Tue, 07 Dec 2010 03:03:19 GMT

If you are the proud owner of a Dodge Neon with a check engine light on and it's showing error code P0141 on your scanner, you probably need to replace the rear oxygen sensor. This video will show you how to do that as easily as possible.

Watch the how-to video for How to fix trouble code P0141, the rear oxygen sensor, on a Dodge Neon on WonderHowTo.

Related:

How to remove the blower motor on a Chevy Impala

Tue, 07 Dec 2010 03:00:46 GMT

The blower motor on older American cars were not always very well-made, and most of them are bad now. This video will show you how to check out your blower motor and remove it if need be, which is harder than it should be really.

Watch the how-to video for How to remove the blower motor on a Chevy Impala on WonderHowTo.

Related:

How to replace a broken CV boot joint on your 4x4

Tue, 30 Nov 2010 20:03:10 GMT

When you're out offroading the bottom of your car takes a beating, and it's entirely likely that you could rip or otherwise damage one of the CV joint boots on your axles. This video will show you how to replace a CV joint boot and get your 4x4 back on the offroad.

Watch the how-to video for How to replace a broken CV boot joint on your 4x4 on WonderHowTo.

Related:

How to pack a recovery kit for your 4x4 to ensure your safety while offroading

Tue, 30 Nov 2010 19:56:51 GMT

If you spend a lot of time alone or close to it in the wilderness, then hopefully you already know how important it is to bring a properly packed survival kit. This is true for offroading enthusiasts as well as pedestrian outdoorsman, but the kit requires some great specifically related to your being in a 4x4. This video will show you what you should pack in your 4x4 offroad recovery kit and expla

Watch the how-to video for How to pack a recovery kit for your 4x4 to ensure your safety while offroading on WonderHowTo.

Related:

How to use a wheel winch to rescue your 4WD drive from the mud

Tue, 30 Nov 2010 19:53:38 GMT

If you and your 4WD Jeep or other offroading vehicle venture far enough afield, you will probably find yourself stuck in mud, sand, ruts, or some other sticky situation. This video will teach you how to use a wheel winch to self-rescue your vehicle from all sorts of situations and get your truck driving again.

Watch the how-to video for How to use a wheel winch to rescue your 4WD drive from the mud on WonderHowTo.

Related:

How to remove and install the CV halfshaft / axle on a front-wheel drive car

Tue, 30 Nov 2010 19:48:19 GMT

The CV axles (halfshafts) on your front-wheel drive car can develop a rip or leak pretty easily, leading to noisy driving and eventually axle unreliability. Watch this video for step-by-step instructions on how to remove and install a CV halfshaft.

Watch the how-to video for How to remove and install the CV halfshaft / axle on a front-wheel drive car on WonderHowTo.

Related:

How to diagnose a cracked cylinder head / blown head gasket

Tue, 30 Nov 2010 19:04:51 GMT

Oil is vital to maintaining the health of your engine, but if it's leaving the areas of the car where it's needed it can cause major damage. Watch this video to learn how to diagnose whether a misfire is being caused by a cracked cylinder head or leaking head gasket allowing oil to enter your coolant and spark plugs.

Watch the how-to video for How to diagnose a cracked cylinder head / blown head gasket on WonderHowTo.

Related:

How to install a charging station in your home for the new Nissan LEAF electric car

Mon, 29 Nov 2010 17:40:25 GMT

November 29th marks the day of Nissan's triumph, not only as an automaker, but as an eco-friendly automaker. The new Nissan LEAF has won the 2011 European Car of the Year award, the first all-electric vehicle to be chosen for the award.

LEAF is actually a [http://en.wikipedia.org/wiki/Bacron

Watch the how-to video for How to install a charging station in your home for the new Nissan LEAF electric car on WonderHowTo.

Related:

How to replace the cupholder in an Audi A6, A4, or C5

Tue, 23 Nov 2010 00:25:13 GMT

One of the many slick features on many German cars are articulating hidden cupholders. These break much more often than conventional cupholders and can have to be replaced. Watch this video to learn how to remove and replace the cupholders on an Audi A6, A4, or C5.

Watch the how-to video for How to replace the cupholder in an Audi A6, A4, or C5 on WonderHowTo.

Related:

How to find the hidden hazard and turn flashers on a 1990's Trailblazer or Jimmy

Tue, 23 Nov 2010 00:14:51 GMT

Finding the hazard and turn signal flashers on a car is seldom simple, and on mid-1990's Chevy Trailblazers and GMC Jimmy's this is as true as ever. Watch this video to learn an easy way to access the flashers on either of these cars if you need to fix or replace them.

Watch the how-to video for How to find the hidden hazard and turn flashers on a 1990's Trailblazer or Jimmy on WonderHowTo.

Related:

How to fix a broken back door lock on a Mitsubishi Endeavor

Tue, 23 Nov 2010 00:11:58 GMT

The Mitsubishi Endeavor, like most vehicles, has it's own list of common problems. One of them is the back door locks not working. Watch this video for a guide to diagnosing your door opening problem and, hopefully, fixing it successfully.

Watch the how-to video for How to fix a broken back door lock on a Mitsubishi Endeavor on WonderHowTo.

Related:

How to find the crankshaft position sensor on a Nissan Altima

Mon, 22 Nov 2010 23:32:57 GMT

The crankshaft position sensor on a car can cause the check engine light to come on a lot if it's not working, and they do wear out and need to be replaced eventually. This video will show you where to find the sensor on a Nissan Altima 2.5.

Watch the how-to video for How to find the crankshaft position sensor on a Nissan Altima on WonderHowTo.

Related:

How to fix error codes P0340 & P0341 on a Saturn S-Series

Mon, 22 Nov 2010 23:25:35 GMT

IF you have a Saturn S-Series and it's thrown a P0340 or P0341 error code at your on the scanner after the check engine light has come on, you might be wondering how your cam position sensor can be off if you don't actually have one in your car. Watch this video to learn exactly what this code means to your car and some thoughts on how you might fix it. Three words: spark plug wires.

Watch the how-to video for How to fix error codes P0340 & P0341 on a Saturn S-Series on WonderHowTo.

Related:

How to build a DIY automotive cylinder leak down tester to test engine seals

Mon, 22 Nov 2010 23:21:59 GMT

The seals in your car had best all be functioning properly if you expect your car to work right. To test the ones in your engine cylinders you'll need an automotive cylinder lead down tester, and if you don't want to buy one, you're in luck because this video contains easy-to-follow instructions on how to make one in your garage.

Watch the how-to video for How to build a DIY automotive cylinder leak down tester to test engine seals on WonderHowTo.

Related:

How to clean your car battery terminal for optimum performance

Fri, 19 Nov 2010 01:30:55 GMT

Your car is a well-oiled machine...when you first get it. Once the new car smell wears off and the excitement of driving the latest and greatest model lessens, car maintenance becomes a chore and some of us even forget to do it regularly.

But cars are expensive and you will spend a lot more money fixing something that goes wrong than maintaining and preventing problems now.

If your car battery

Watch the how-to video for How to clean your car battery terminal for optimum performance on WonderHowTo.

Related:

How to make sure your car passes a smog or emissions test

Thu, 18 Nov 2010 01:43:46 GMT

Smog and other emissions tests are an annoying part of life for most American motorists. It can be surprising and even more annoying when your car fails, and even new ones can. Watch this video for tips that will ensure that your car passes.

Watch the how-to video for How to make sure your car passes a smog or emissions test on WonderHowTo.

Related:

How to replace your worn-out rear brake shoes on your vehicle

Wed, 17 Nov 2010 21:07:50 GMT

Are your rear brake shows worn out and making noise? Well, then today's you lucky day, because Scotty Kilmer is going to show you how to change brake shoes on a car. First, you'll need to jack up the car a few inches from the ground. Take of the wheel, then get a big hammer and whack the drum a few times to loosen it up. Take it off. For the rest of the repair instructions, watch the full video!

Watch the how-to video for How to replace your worn-out rear brake shoes on your vehicle on WonderHowTo.

Related:

How to remove and replace motorcycle handlebars

Mon, 15 Nov 2010 20:43:28 GMT

Is your old motorcycle's handlebar looking sadder than Mischa Barton's acting career? Then perhaps it is time to get them replaced. But don't waste your time and money on getting them fixed at a car shop.

Instead, just check out this video to find out how to remove and replace them yourself.

Quickly removing and replacing handlebars from an old motorcycle.

Watch the how-to video for How to remove and replace motorcycle handlebars on WonderHowTo.

Related:

How to fix a power car window using a fuse and panel removal tool

Mon, 15 Nov 2010 20:29:12 GMT

These days you can get a car tailored with special gangster rims, headlights, and sound systems, but one of the features of a standard car we all take for granted is power windows. Before those, all we had were frustrating crank-up windows that always got stuck if we didn't add enough elbow grease.

So imagine your frustration of these power windows all of a sudden stop in the middle of coming do

Watch the how-to video for How to fix a power car window using a fuse and panel removal tool on WonderHowTo.

Related:

How to improve fuel efficiency by throwing out extra weight

Fri, 12 Nov 2010 22:02:22 GMT

Here's a quick and easy tip for improving your fuel efficiency: Throw out any excess stuff you've got lying around in your trunk or in your car. Removing this extraneous weight helps you get more mileage for your buck.

Got junk in your trunk? Take it out! 1 percent of fuel efficiency is lost for every 50 pounds of extra weight your car holds. Lighten up!

Watch the how-to video for How to improve fuel efficiency by throwing out extra weight on WonderHowTo.

Related:

How to keep your car seat cool with a reflective emergency blanket

Fri, 12 Nov 2010 01:28:42 GMT

If you've ever parked your car outside in direct sunlight and it's about 90 degrees out, you know what ends up happening 2 hours later when you get back into the car.

The car itself is hotter than hell, and your car seat is so hot it feels like it'll burn your tushie if you sit on it.

In the hot seat? Keep your car upholstery comfortable by throwing a reflective emergency blanket over it. Cool!

Watch the how-to video for How to keep your car seat cool with a reflective emergency blanket on WonderHowTo.

Related:

How to use the 3M Dynamic Mixing System body filler gun for auto body repair

Wed, 10 Nov 2010 23:41:56 GMT

If you're into auto body repair, the 3M Dynamic Mixing System is an interesting one to try out. In this video, you'll learn how to use the body filler gun. You just might want to NOT use the zig-zag pattern used in the video to apply the filler. It's best to apply the body filler on top of each other, which will eliminate the possibility of pinholes.

Watch the how-to video for How to use the 3M Dynamic Mixing System body filler gun for auto body repair on WonderHowTo.

Related:

How to blend automotive paint to match an existing color

Wed, 10 Nov 2010 23:35:02 GMT

If you're thinking about making some minor paint repairs on your vehicle, getting that paint to match the color on your car can be a difficult task. This video will help you out by showing you how to blend your automotive paint to match the existing color.

This is the process of spraying new paint and blending it into the old color to produce a color match. Ideally, you want to mix a color that i

Watch the how-to video for How to blend automotive paint to match an existing color on WonderHowTo.

Related:

How to replace drum brake shoes on a 2001 Honda Odyssey

Wed, 10 Nov 2010 23:31:47 GMT

Some of you out there actually own a Honda Odyssey, and if you do, you may be in desperate need of some new drum brake shoes. In this video, Eric shows you how easy it is to remove and replace drum brake shoes on a 2001 Odyssey. There's some good info on drum brake servicing, plus more!

Watch the how-to video for How to replace drum brake shoes on a 2001 Honda Odyssey on WonderHowTo.

Related:

How to solve idling problems on a Honda Integra

Wed, 10 Nov 2010 23:26:37 GMT

A lot of people seem to have idle problems in their Honda vehicles, especially the Integra models. And idling problems are really hard to pinpoint. But you're in luck, because Eric has some great tips for hunting down those engine idling problems and eradicating them for good! Some of these tips include bleeding a cooling system, checking for vacuum leaks, reading the check engine light codes and

Watch the how-to video for How to solve idling problems on a Honda Integra on WonderHowTo.

Related:

How to beware of gunk underneath the oil cap when shopping for used cars

Wed, 10 Nov 2010 23:19:51 GMT

If you're looking to buy a new used car, then Eric has a great tip for you to avoid getting scammed— look into the horse's mouth. Yes, that sounds cryptic, but it's a very similar process where you look underneath the oil cap. If it looks smooth like it should, go ahead, think about purchasing that vehicle. But if there's a lot of built-up black gunk on the bottom, do yourself a favor and RUN. Tha

Watch the how-to video for How to beware of gunk underneath the oil cap when shopping for used cars on WonderHowTo.

Related:

How to increase your vehicle's performance by tightening the throttle cables

Wed, 10 Nov 2010 23:14:35 GMT

In this video, learn a great performance upgrade for your vehicle that costs nothing! Eric talks about his old Honda Integra and his irritation at its throttle response. But cars like this have cables that run to the throttle and sometimes they get loose. All you need to do is tighten the cables!

Watch the how-to video for How to increase your vehicle's performance by tightening the throttle cables on WonderHowTo.

Related:

How To Decide To Replace Or Repair A Dent With Metal Straightening

Tue, 09 Nov 2010 17:43:24 GMT

First Things First

Before you can begin to work on a damaged panel, you must determine what type of material that you are working on. For instance, the panel may be mild steel, high strength steel, aluminum, plastic, sheet molded compound, or a number of other types of material.

Why Is This Important?

Each type of metal or composite have different repair methods and cautions that must be considered. If you are working on a fender that is made with high strength steel, you must be aware of the amount of heat that can be applied to the panel. If overheated, the metal will be weakened. Some auto manufacturers may recommend no heat to be used at all. Therefore, all cold repair methods must be used. Some parts are made out of ultra high strength steel, boron and magnesium. These parts generally require replacement only.

Mild Steel

In this lesson we’re going to focus on body parts such as fenders, hoods, quarter panels, etc. that are made with mild steel.

Repair or Replace

Once we have determined the damaged panel is mild steel, we need to analyze the damage to decide if repair or replace is a best option. Here are a few questions that you can ask yourself:

1. Will the cost of the panel exceed the cost of repair?
For example, if a shop charges $50 per hour and a $200 hood has 5 hours of damage, which would be the best option? A new hood, right? It would cost $250 to repair the hood and $200 to replace it. Sure, there will be more paint time involved, but replacement would be the better option.
2. Can the panel be repaired?
Sometimes it is not which method is more economical, but whether the part is repairable. The damage may be too severe to properly repair.
3. Will a repair cause safety issues?
Damage may be in an area that should not be repaired. For example, damaged crush zones or a part that is severely kinked. This may require replacement only.
4. Does the vehicle have prior damage?
I know that insurance will not pay for prior damage, but you don’t want to repair a panel with excessive prior damage or rust. This may be an extra expense from the customer.
5. How complex is the damage?
Is the damage on body lines that have been work hardened from the factory? Can you gain access to the damaged area? Will this be a one sided or two sided repair?

Ask yourself these questions as you inspect the damage. Once you have determined that repair is the best option, next you can begin the repair process, which we'll discuss in the next article.

Via How To Decide To Replace Or Repair A Dent With Metal Straightening on WonderHowTo.

Related:

How to fix transmission and oil seal leaks fast with AT-205 Re-Seal

Mon, 08 Nov 2010 01:51:18 GMT

If you've got an oil seal leak in a very inconvenient place, then this video by Scotty Kilmer will show you how a little bottle of re-sealer may be able to fix that leak. The vehicle in this video has a leak in the front main seal of the automatic transmission. The seal is pretty cheap, but you have to pull the transmission off to replace it, which can take a serious amount of time. The re-sealer

Watch the how-to video for How to fix transmission and oil seal leaks fast with AT-205 Re-Seal on WonderHowTo.

Related:

How to troubleshoot and fix broken windshield wipers

Mon, 08 Nov 2010 01:37:52 GMT

If your windshield wipers don't come on when you turn the switch, then try out the solutions in this video! First, check to see if there's a blown fuse. If that's okay, next check the power going to the wiper motor. You have to take the wiper arms off to get to the motor. Watch Scotty Kilmer in this video for all the remaining troubleshooting tips for broken windshield wipers.

Watch the how-to video for How to troubleshoot and fix broken windshield wipers on WonderHowTo.

Related:

How to fix sticking power steering with Sea Foam Trans Tune

Mon, 08 Nov 2010 01:27:06 GMT

Is your power steering binding when you're trying to turn? Or maybe it turns real easy to the right, but extremely hard to turn to the left? Well, that's a classic sign of a power steering rack that has problems. But before you go out and buy an expensive rack and pinion, and take the whole front end of the car apart to replace it, you might want to try a little trick first— Sea Foam Trans Tune, w

Watch the how-to video for How to fix sticking power steering with Sea Foam Trans Tune on WonderHowTo.

Related:

How to de-ice the windshield on your car

Thu, 04 Nov 2010 20:06:36 GMT

If you live in a snowy area then you probably know all too well the annoyance of having ice and snow build up on your windshield that you have to clean up in the morning before you leave home. There are easier ways to do it than what you're probably doing, and this video will give you great tips on preventing ice from forming and getting rid of it once it's there.

Watch the how-to video for How to de-ice the windshield on your car on WonderHowTo.

Related:

How to control travel trailer sway and tongue weight

Thu, 04 Nov 2010 19:06:00 GMT

In this clip, we learn how to reduce sway and control tongue weight when using a travel trailer. Specifically, you'll learn about loading to the tongue — tongue weight should be 10-15% of your overall trailer weight. For more information, watch the clip.

Watch the how-to video for How to control travel trailer sway and tongue weight on WonderHowTo.

Related:

How to lubricate the slideout mechanism on an RV

Thu, 04 Nov 2010 19:03:03 GMT

In this automotive maintenance guide, we learn how to lubricate the slide-out mechanism on a slide-out recreational vehicle. For all of the details, including full, step-by-step instructions, and for more advice on how to maintain your slide-out RV, take a look.

Watch the how-to video for How to lubricate the slideout mechanism on an RV on WonderHowTo.

Related:

How to replace a worn or broken timing belt on a Dodge Neon

Thu, 04 Nov 2010 18:59:36 GMT

Up to the task of replacing the timing belt on your Dodge Neon? This automative repair guide presents a complete, step-by-step walkthrough of the replacement process and will help you along your way. For all of the details, and to get started replacing the timing belt on your own Neon, take a look.

Watch the how-to video for How to replace a worn or broken timing belt on a Dodge Neon on WonderHowTo.

Related:

How to ride a motorcycle in a group

Mon, 01 Nov 2010 09:00:00 GMT

In this tutorial we learn how to ride a motorcycle in a group. You will have each person separated by enough length so you can each safely stop. There should be a trail of one in front of the other, not everyone next to each other. Follow the hand signals that each person gives so you call know where to go. You should have one leader and then other people following with one person in the back. If

Watch the how-to video for How to ride a motorcycle in a group on WonderHowTo.

Related:

How to change and balance a car tire

Mon, 01 Nov 2010 07:27:00 GMT

In this tutorial we learn how to change and balance a car tire. First, take the tire and remove the air out of it from all the sides. After this, remove the tire from the wheel. You will need to use a pry bar to help you remove it from the tire completely. It will help out a lot if you have a machine that will do this for you. Then, apply grease around the wheel and put the new tire on. From here,

Watch the how-to video for How to change and balance a car tire on WonderHowTo.

Related:

How to make a u-turn on a motorcycle

Mon, 01 Nov 2010 07:15:00 GMT

In this video, we learn how to make a u-turn on a motorcycle. You must be able to complete a u-turn without putting your foot down. Depending on the size of your motorcycle, you will need 20-24 feet to do this properly. The most common mistake is oversteering and putting your foot down. Keep the clutch in the friction zone, drag the rear bike the stabilize the bike, add throttle if needed, and shi

Watch the how-to video for How to make a u-turn on a motorcycle on WonderHowTo.

Related:

How to change a 20 inch tire

Mon, 01 Nov 2010 01:12:00 GMT

In this tutorial, we learn how to change a 20 inch tire. First, you will need to remove the valve core with a removal tool. Then, rotate the rim until the beat is separated. From here, secure the rim on a machine so it can be unmounted from the tire. After the tire has come off from the wheel, repeat this on all of the different tires. When finished, use the same tool to put the new tire back on.

Watch the how-to video for How to change a 20 inch tire on WonderHowTo.

Related:

How to start out on a motorcycle

Sun, 31 Oct 2010 21:45:00 GMT

In this tutorial, we learn how to start out on a motorcycle. Before you ride a motorcycle, you will want to learn where all the controls are. After this, you need to make sure all the springs are in place and the clutch works well. Then, check the engine oil to make sure it's full, and then make sure the throttle is working correctly. The steering bar should also be checked and the ignition switch

Watch the how-to video for How to start out on a motorcycle on WonderHowTo.

Related:

How to install Recon LED Strobes and HIDs on a truck

Sun, 31 Oct 2010 21:27:01 GMT

In this tutorial, we learn how to install Recon LED Strobes and HIDs on a truck. You must first learn where each of the tires need to install and make sure they are placed in the right direction for what you want the lights to look like. After this, you will connect one side to the white wire on the positive. Then, you will leave the white disconnected on the other side for the flash to alternate

Watch the how-to video for How to install Recon LED Strobes and HIDs on a truck on WonderHowTo.

Related:

How to bleed and adjust trailer brakes

Sun, 31 Oct 2010 19:15:00 GMT

In this video, we learn how to bleed and adjust trailer brakes. First, level the trailer and use a jack stand to support it. Now, hand bleed the brakes using the master cylinder. From here, let any air out of the break line, doing this on all the different brake lines. Next, fill up the master cylinder with oil to make sure it doesn't run dry. Open the pressure valve and then close it as your run

Watch the how-to video for How to bleed and adjust trailer brakes on WonderHowTo.

Related:

How to buy a used car with all the noteworthy facts

Sun, 31 Oct 2010 15:45:01 GMT

In this tutorial, we learn how to buy a used car with all the noteworthy facts. First, look at the car to see if it looks like it's in good condition. If there's a color mismatch this means the part has been repainted. Check for over spray on the trim of the car and on the sides as well. Check to see that all the headlights and bumpers are aligned. Then, open and close all the doors to make sure t

Watch the how-to video for How to buy a used car with all the noteworthy facts on WonderHowTo.

Related:

How to bleed air out of your car's brake system

Sun, 31 Oct 2010 05:30:00 GMT

In this video, we learn how to bleed air out of your car's brake system. To do this, you will first need to hike your car up on a jack. After this, remove the wheel from the car and then find the bleeder screw on the car. This is down at the bottom but the air will want to go up. To help this, you will use a magnet on the wheel that has a canister attached to it. Then, connect this to the brake an

Watch the how-to video for How to bleed air out of your car's brake system on WonderHowTo.

Related:

How to powerbleed your brakes

Sat, 30 Oct 2010 21:03:00 GMT

In this tutorial, we learn how to powerbleed your brakes. First, test for any leaks and then release the pressure so you can fill the bleeder tank with fluid. After this, you will screw the pump on and then start to pump pressure to approximately 15 psi or check your service manual for recommended pressure. As the pressure builds, you will see fluid traveling through the tube to the brake reservoi

Watch the how-to video for How to powerbleed your brakes on WonderHowTo.

Related:

How to countersteer and turn on a motorcycle

Sat, 30 Oct 2010 20:33:00 GMT

In this video, we learn how to countersteer and turn on a motorcycle. First, you will push left and lean left while you are on the motorcycle. Push on the hand grip while you are leaning your body. Turn at a normal speed, not while you are going really fast, or you can fall off. You will turn the handlebars just like a steering wheel on a car going at a slow speed. This should be between 8 and 15

Watch the how-to video for How to countersteer and turn on a motorcycle on WonderHowTo.

Related:

How to bleed motorcycle brakes

Sat, 30 Oct 2010 15:03:00 GMT

In this tutorial, we learn how to bleed motorcycle brakes. First, pick out the right kind of oil for your bike. Then, fill the reservoir and you can start the bleeding process using a Mighty Vac. After you fill up the fluid then connect the vac to the bleed line and start to pump out the air gently. Once you have fluid come through this, you will close the nipple for the bleed line. Now, you will

Watch the how-to video for How to bleed motorcycle brakes on WonderHowTo.

Related:

How to make a quick stop on a motorcycle

Sat, 30 Oct 2010 10:27:00 GMT

In this tutorial, we learn how to make a quick stop on a motorcycle. You must reach a speed of 15 mph first. A quick stop means you stop right when you are in the middle of driving, without slowing down first. Close the throttle first, then pull in the clutch. From here, apply both brakes evenly and firmly without locking them up and keep the handlebars straight. Make sure you ride safe and you do

Watch the how-to video for How to make a quick stop on a motorcycle on WonderHowTo.

Related:

How to master the obstacle swerve on a motorcycle

Sat, 30 Oct 2010 09:12:00 GMT

In this video, we learn how to master the obstacle swerve on a motorcycle. First, you must reach a speed of 15 miles per hour and then swerve around a 7 foot obstacle 13 feet ahead. Learn how to swerve to the left first and then start to swerve to the right on a closed course. Do not brake while you are swerving and learn how to use counter steering. Keep your head up and look where you want to go

Watch the how-to video for How to master the obstacle swerve on a motorcycle on WonderHowTo.

Related:

How to bleed the front breaks of a scooter

Sat, 30 Oct 2010 02:09:00 GMT

In this tutorial, we learn how to bleed the front breaks of a scooter. First, operate the vac and bleed the nipple from the brake. Then, unscrew the bleed nipple to let out any air trapped in the circuit. Brake fluid level should never drop below the minimum level during the procedure. Close the bleed nipple and then re-fit the cap to the vac. This procedure will only take you a few minutes and it

Watch the how-to video for How to bleed the front breaks of a scooter on WonderHowTo.

Related:

How to remove a fuel fliter

Sat, 30 Oct 2010 00:45:00 GMT

In this video, we learn how to remove a fuel filter. Start out by removing the secondary retainer cup. After this, you will install quick disconnect tool and rotate until the primary cup has been released. Repeat the previous steps until all the lines are disconnected from the vehicle. After this, you should be able to simply remove the fuel filter from the vehicle. Make sure you are using the rig

Watch the how-to video for How to remove a fuel fliter on WonderHowTo.

Related:

How to fix an RV awning that will not retract

Fri, 29 Oct 2010 22:36:00 GMT

In this tutorial we learn how to fix an RV awning that will not retract. If you find yourself in the situation where the awning on your RV just won't retract, then this is the video for you! To secure the awning you will first need to go to the roof of the RV. When you get on top, you will need to look at the awning and see if something is stuck and causing it to stick. Manually secure the awning

Watch the how-to video for How to fix an RV awning that will not retract on WonderHowTo.

Related:

How to keep it safe when driving a recreational vehicle (or RV)

Thu, 28 Oct 2010 18:16:30 GMT

In this driver's guide, we learn how to take some of the stress out of driving an RV. With a few simple techniques, you'll find it's easy. For all of the relevant details, and to get started learning more about RV driving yourself, just take a look.

Watch the how-to video for How to keep it safe when driving a recreational vehicle (or RV) on WonderHowTo.

Related:

How to prepare a new OEM car body part for paint

Thu, 28 Oct 2010 18:13:54 GMT

In this automotive guide, we learn how to prepare an OEM car-body part for painting. For all of the gritty details, including step-by-step instructions, and to get started prepping your own parts for painting, watch this video tutorial.

Watch the how-to video for How to prepare a new OEM car body part for paint on WonderHowTo.

Related:

How to program a remote control to work with a Nissan Altima

Thu, 28 Oct 2010 18:12:33 GMT

In this automotive guide from Rich Pin, we learn how to program a remote to work with a Nissan Altima car. For all of the gritty details, including step-by-step instructions, and to get started reproramming your own remote, watch this video tutorial.

Watch the how-to video for How to program a remote control to work with a Nissan Altima on WonderHowTo.

Related:

How to diagnose and fix a "no heat" problem on a Nissan Altima

Thu, 28 Oct 2010 18:10:56 GMT

In this automotive repair guide, we learn how to troubleshoot and repair a "no heat" problem on a Nissan Altima car. For all of the gritty details, including step-by-step instructions, and to get started resolving your own Altima's no-heat trouble, watch this video tutorial.

Watch the how-to video for How to diagnose and fix a "no heat" problem on a Nissan Altima on WonderHowTo.

Related:

How to remove and replace the automatic transmission on a Dodge Neon

Thu, 28 Oct 2010 18:09:37 GMT

In this automotive repair guide, we learn how to remove and replace an automatic transmission on a Dodge Neon car. For all of the gritty details, including step-by-step instructions, and to get started removing the tranny on your own Dodge Neon, watch this video tutorial.

Watch the how-to video for How to remove and replace the automatic transmission on a Dodge Neon on WonderHowTo.

Related:

How to replace the valve seals if your engine is smoking

Mon, 18 Oct 2010 19:34:47 GMT

Does your car engine blow white or blue smoke when your first start it up and then stop? That usually means that your engine valve seals aren't working correctly. Watch this video to learn how to find and fix the problem.

Watch the how-to video for How to replace the valve seals if your engine is smoking on WonderHowTo.

Related:

How to use a lab scope for coil ramping and diagnosing good and bad coils

Mon, 18 Oct 2010 19:26:31 GMT

The lab scope is one of the most powerful diagnostic and repair tools for the modern mechanic. In this video you'll learn how adjust coil ramping with a lab scope and use the scope to determine if your have good or bad engine coils.

Watch the how-to video for How to use a lab scope for coil ramping and diagnosing good and bad coils on WonderHowTo.

Related:

How to read a car electrical diagram with a Toyota Tacoma clutch start switch example

Mon, 18 Oct 2010 19:23:46 GMT

Being able to read an electrical diagram will greatly aide your ability to correctly diagnose car problems. If you need some help with it, watch this video for a detailed explanation of how to read an example map for the clutch start switch on a Toyota.

Watch the how-to video for How to read a car electrical diagram with a Toyota Tacoma clutch start switch example on WonderHowTo.

Related:

How to fix error code P1345 by changing your timing with a lab scope

Mon, 18 Oct 2010 19:21:19 GMT

If you've done major work on your engine recently, you may find yourself with error code P1345, which means your timing is off. In this video you'll learn how to use a lab scope to both diagnose and fix a distributor timing problem.

Watch the how-to video for How to fix error code P1345 by changing your timing with a lab scope on WonderHowTo.

Related:

How to use a smoke machine to find an evap leak in a car

Mon, 18 Oct 2010 19:15:10 GMT

Figuring out exactly where a small leak is in a solid black car tube is tough. That's where the smoke machine comes in. In this video you'll learn how the party staple can help you test an evap line for leaks.

Watch the how-to video for How to use a smoke machine to find an evap leak in a car on WonderHowTo.

Related:

How to find evidence of low oil pressure in your car

Mon, 18 Oct 2010 18:53:02 GMT

If the oil pressure gauge on your car is acting erratic, you might think that the fuel pump or filter on your car is bad. Assuming is not the way to fix your car, and in this video you'll learn how to figure out what is causing your low oil pressure, possibly saving you having to replace your filter and pump.

Watch the how-to video for How to find evidence of low oil pressure in your car on WonderHowTo.

Related:

How to find, test, and replace the blower resistor on a Chrysler

Mon, 18 Oct 2010 18:50:10 GMT

The blower resistor is one of the many obscure parts in your car. If you find that the fan in your car only works on high, you might well have a broken one. In this video you'll learn how to find, test, and if need be replace the blower resistor in a 2002 Dodge van.

Watch the how-to video for How to find, test, and replace the blower resistor on a Chrysler on WonderHowTo.

Related:

How to change the timing belt on a '00 Lexus or Toyota 3.0 engine

Mon, 18 Oct 2010 18:46:33 GMT

Lexus and Toyota are really the same company, which means happily that you can apply many of the same techniques to fixing both. In this video you'll learn how to change the timing belt on a 2000 Lexus or Toyota 3.0 liter engine (of Camry fame) yourself.

Watch the how-to video for How to change the timing belt on a '00 Lexus or Toyota 3.0 engine on WonderHowTo.

Related:

How to fix error code P0500 on a Nissan Quest

Mon, 18 Oct 2010 18:40:30 GMT

If the speedometer on your car isn't working and the check engine light is on, get your scanner out and look for code P0500. If you get that code, watch this video to learn a quick easy fix for the problem.

Watch the how-to video for How to fix error code P0500 on a Nissan Quest on WonderHowTo.

Related:

How to use a lab scope to test the fuel pump circuit in a car

Mon, 18 Oct 2010 18:25:21 GMT

The lab scope is one of the most versatile diagnostic tools that you can have in your car shop. If you've been thinking about buying one or are looking for new ways to use it, watch this video to learn how to use a lab scope to test a fuel pump circuit.

Watch the how-to video for How to use a lab scope to test the fuel pump circuit in a car on WonderHowTo.

Related:

How to use a vacuum gauge to diagnose a broken timing belt

Mon, 18 Oct 2010 18:16:00 GMT

There are several areas of your car that should contain a vacuum, and a vacuum gauge is a cheap easy way to identify all sorts of car problems. In this video you'll learn how to diagnose a bad timing belt with a vacuum gauge more cheaply and easily than any other method.

Watch the how-to video for How to use a vacuum gauge to diagnose a broken timing belt on WonderHowTo.

Related:

How to fix uneven or loose spark plug tubes that mess up your valve covers

Mon, 18 Oct 2010 18:11:56 GMT

Your spark plugs are finicky by themselves, but did you know that the spark plug tubes in your engine can become loose or uneven, leading to your valve covers not sitting evenly? Watch this video to learn how you can fix your spark plug tubes and prevent engine problems.

Watch the how-to video for How to fix uneven or loose spark plug tubes that mess up your valve covers on WonderHowTo.

Related:

How to test a possible bad coil on your car for cheap

Mon, 18 Oct 2010 18:05:32 GMT

The coils in your car's engine can cause a lot of misfires if they aren't working properly. If you want to test them and don't have any expensive professional equipment like a labscope, watch this video to learn an easy way to test coils.

Watch the how-to video for How to test a possible bad coil on your car for cheap on WonderHowTo.

Related:

How to fix vacuum problems, error codes P0171 and P0174, in a Ford Escape

Mon, 18 Oct 2010 18:02:25 GMT

Determining exactly what of the thousands of parts on a modern car is broken is as difficult as doing the repairs many times. IN this video you'll learn how to diagnose and fix error codes P0171 and P0174 on a 2001 Ford Escape, which indicate vacuum problems.

Watch the how-to video for How to fix vacuum problems, error codes P0171 and P0174, in a Ford Escape on WonderHowTo.

Related:

How to replace the rear brake pads and rotors on a Hyundai Sonata

Mon, 18 Oct 2010 17:52:25 GMT

Hyundai is finally getting the respect it has long deserved as automaker, and their Sonata mainstream sedan is more popular than ever before. In this video you'll learn how to replace the rear brake pads and rotors on a Hyundai Sonata quickly and easily.

Watch the how-to video for How to replace the rear brake pads and rotors on a Hyundai Sonata on WonderHowTo.

Related:

How to inspect your car alternator and fix it if it's bad

Sat, 16 Oct 2010 01:14:35 GMT

The alternator in your car is a vital part of your electrical system. If your battery is draining quickly or your battery light comes on for no reason, you probably have a bad alternator. Watch this video to learn how to assess problems with the alternator and fix them yourself.

Watch the how-to video for How to inspect your car alternator and fix it if it's bad on WonderHowTo.

Related:

How to replace leaking intake manifold gaskets

Sat, 16 Oct 2010 01:02:59 GMT

If the intake manifold on your car is leaking, you probably have a gasket problem. In this video Emmy-winning auto mechanic Scotty Kilmer will teach you how to replace the intake manifold gasket on your car, including prepping the new one with brake cleaner, of all things.

Watch the how-to video for How to replace leaking intake manifold gaskets on WonderHowTo.

Related:

How to replace a bad expansion valve in your car AC

Sat, 16 Oct 2010 00:54:12 GMT

One of the many thing that can go wrong with the air conditioner on your car is a bad expansion valve. In this video you'll learn how to replace the expansion valve yourself, assuming that you've already drained the refrigerant from the system professionally.

Watch the how-to video for How to replace a bad expansion valve in your car AC on WonderHowTo.

Related:

How to clean or replace a worn air flow sensor in your car

Sat, 16 Oct 2010 00:48:22 GMT

If your car doesn't run very well and sometimes belches black smoke from the tailpipe, you may well have a problem with your air flow sensor. In this video you'll learn how to determine what's wrong with the sensor and then clean or replace it accordingly.

Watch the how-to video for How to clean or replace a worn air flow sensor in your car on WonderHowTo.

Related: