While there are many different manufacturers of wood stoves, today it’s easier than ever to find all of the wood stove parts you might need – even years after you’ve purchased your stove. Even when you might not know the exact model or even the manufacturer of your stove, you can often find a parts supplier who will help you find the exact part you need.

There are a few common replacement parts for wood stoves that can be found at most suppliers. Below are some of the more common categories.

Stove Mica or Isenglass – Wood stoves can’t use regular tempered glass. Due to the high heat, special glass is required. If you’ve cracked the glass in the door of your wood stove, you don’t necessarily have to buy a manufacturer’s replacement part. As long as you know the size and thickness, after market glass will work.

Door Gasket – Most wood stove manufacturers use the same type of gasket material in their doors. Often you can replace it once it’s worn with after market gasket material to save a bit of money.

Blower Thermostat – While each stove manufacturer might use their own thermostats, often these parts are somewhat interchangeable. All thermostats work on the same principle, so again you might be able to use an after market part instead of ordering a replacement from the factory.

Blowers and Fans – While each stove might have a specific fan installed, the stove manufacturers usually just install a stock blower. Often these blower motors can be ordered online from other suppliers at a significant savings.

Chimney and Flue Parts – These are normally very standardized parts. In almost every case there is no reason to order replacement flue parts from the manufacturer. There are dozens of reputable suppliers of quality chimney replacement parts. If your stove pipe is damaged, a simple search online should let you find exactly what you’re looking for.

There are a few exceptions to this, however. In the case of cast-iron or stove-specific replacement parts, you’ll need to make sure that you either order directly from the manufacturer or that you know for certain that the replacement part will work. While handles, lifters, and even fire dogs are somewhat generic, each stove has slightly different dimensions, so you’ll need to know what you need before you order.

In addition, any new cast iron stove part must be fully seasoned before use. This seasoning drives all moisture out of the metal so that it’s safe to fully heat. If you fail to take this step, the metal might shatter once it’s heated. For this reason, it’s normal that cast iron parts are sold with no warranty. Please note that the seasoning of these parts is completely different than seasoning of cast iron cookware.

To season a cast iron stove part do one of the following:

Light 5 small “kindling fires” in your wood stove, allowing the stove to cool completely between fires.

or

Place the part in an oven set at 325 degrees. Increase the temperature every 30 minutes by 25 degrees until you oven is at the maximum temperature for 30 minutes. Let the oven and the part come back to room temperature slowly (overnight).

For most normal wood stove parts replacement needs, you should be able to find suppliers online who can provide the exact part you need at a price you can afford.

If you’re looking for an inexpensive way to start heating your home with alternative energy, you might consider looking for a used wood stove. While you might not be able to find as great a selection as you would with new stoves, often the price difference makes this a real attractive option for those looking to save some money. Of course, there are several things you should consider when looking for used instead of new.

First, if you’ve decided to go with a used stove, you should think through exactly how you’re going to install it in your home. A free-standing stove can be the easiest option as well as the most efficient design, but you’ll have to consider the chimney placement. Roof penetration can lead to water intrusion if not properly done, and wall placement will mean that your choices of stove placement will be limited to those locations near an outside wall. It might be possible to find a used fireplace insert, but you’re even more limited by the size of your existing fireplace.

Some free-standing wood stoves can be placed on any floor. Others require heat-resistant flooring for some distance around them. You’ll need to consider your options before deciding on a final placement. Sometimes this can be as simple as building up a brick or stone foundation for the stove. The complexity of this will vary based on your existing flooring.

Finally, some stoves include blowers and fans that require electrical power. These wood stoves have the potential of providing whole-home heating, but would require nearby electrical power. Sometimes these stoves require a dedicated circuit, but this isn’t always the case since they use minimal power. Regardless, you should be prepared to do some electrical work if the stove you’re considering needs electrical power.

Once you’ve considered your specific needs, you can begin looking for a used stove. Garage sales, craigslist, and even freecycle can be places to find someone wanting to get rid of an unneeded stove, but they can be somewhat hit and miss. There are web-based dealers who sometimes have inventory of used stoves that have been replaced as someone upgrades.

Regardless of where you find your wood stove, you’ll need to do a thorough inspection before buying to make sure that the stove is in good condition. Constant use will eventually degrade even the strongest steel, so you’ll want to make sure the fire box is still in good condition. Older cast iron stoves are prone to rust-through, so while they might be attractive from an antique perspective, they might not be as functional. Make sure all of the vents open and close and that the doors work smoothly and fit tightly. If there are adjustable vents surrounding the heating chamber, make sure they work as well.

If the wood stove includes electrical components such as a fan or blower, you might not be able to verify that it works. Make sure you ask the owner, but in most cases you’ll have to take his word for it. Find out who the manufacturer is and see if you can go online to check on availability of parts. With older wood stoves, major parts such as blower motors can be difficult and sometimes even impossible to find. In these cases repair can be so expensive that it’s almost better to choose a new stove. Occasionally stoves that are offered at a cheap price are in this category, so make sure you do your due diligence.

If you decide to purchase a used stove instead of new, make sure you consider all of the variables. It’s possible to find a great deal on a great stove, but it’s also possible to buy someone else’s problem. When you hit the right combination, a used wood stove can be a great investment that will provide years of heating comfort for your home.

Having a fireplace at home can make a cold night cozy. However, there are times when the heat is lost quickly. If you frequently have this problem, you could install a pellet stove insert. For homeowners who have an existing fireplace, you can simply purchase an insert and install it. It will convert your inefficient, drafty fireplace in a very green and environmentally friendly whole-house heater.

Why is it a better choice that the conventional fireplace? The heat is circulated and so the area is better heated. You will use pellets or wood waste (wood shavings or wood scraps) in the pellet stove and that results in instant heat for your home. The pellet inserts may not be common but they are easy to find now. Any of our suppliers will be able to show you the best selection at the best prices. Just feed the fire with pellets and efficient heat can be generated.

As compared to cord wood, Wood pellets are cheaper. Since the pellet produces only about 7.5 g of smoke for every hour, it is a good choice and is now EPA certified. Over the years, the pellet stove has greatly improved. They are now among the most efficient stoves on the market.

Since pellet stoves require the use of electricity or portable generator, some homeowners are still hesitant about using one. Some models are designed to be used with back-up battery power instead of a generator, and they are much quieter. Just be aware that in the case of extended power outages, a generator is a better choice. But if you consider the cost and efficiency it can provide your home, it is definitely a good choice. As long as you have a generator or battery to provide back-up in the case of a power outage, you’ll find pellet stoves to be very economical.

Another great thing is the storage of the pellets. It’s much easier to find a storage place for the pellets as compared to the cord wood. They also tend to be easier to transport. Often suppliers of these wood pellets can deliver them right to your home. Of course a disadvantage is that unless you know of a source for free wood chips, you’ll probably have to pay for fuel. But even at that, the cost savings versus traditional fuel is quite large.

Before purchasing one, you need to do a little more research to ensure that it can meet your heating needs. You also need to consider the cost of fuel and if you don’t have a fireplace, you will need a freestanding stove. With these things in mind, you can now make a wise decision.

Some quality manufacturers of these stove inserts are Harman, Quadra-Fire, Blaze King, Energy King, Kozy Heat, Kuma, Napoleon, and Vogelzang. More traditional stove manufacturers are making pellet stoves every year so as time goes on your choices will just get better and better.

A pellet stove insert is a choice that’s now in demand but your decision to purchase it will depend on your needs and your budget.

A traditional wood-burning fireplace gives a home a traditional charm while providing warmth and light on a cold night. However, traditional fireplaces are inefficient. They require large fires just to heat a single room which means that much more wood is required than with a wood stove. Thankfully, with the addition of wood stove inserts, your fireplace can become a very functional whole-house heater while keeping the charm and style that you love.

Winter storms often lead to extended power outages. While a fireplace is nice to look at, there’s no longer any need to camp out in the living room when the power is out. With a high-efficiency insert, it’s possible to use you wood-burning stove as backup heating for your home – without sacrificing comfort. This means that as long as you have firewood on hand, you can be warm, no matter what nature throws your way.

All new wood stove inserts are EPA certified. Their efficiency means that most are carbon-neutral. This means that the trees remove as much carbon dioxide from the air as is produced when the wood is burned. This isn’t the case with traditional fireplaces which are very inefficient and produce much more smoke.

Most new inserts either use a catalytic converter or a non-catalytic re-burner system. Both systems have their benefits and small negatives. Catalytic systems tend to be the best at removing emissions, but the converters are a maintenance item and are a part that must be replaced every few years. Non-catalytic burners have no parts that require replacing, however they’re not as efficient. Either system redirects the exhaust back through the heat to further burn off some of the gasses. Even in areas where wood-burning fireplaces are prohibited, these inserts are allowed.

Many fireplace inserts are designed so that air flows inside the firebox to help keep the glass clean. Regardless, the glass can be easily cleaned with a fireplace or oven cleaner.

Most modern inserts will provide efficient heating even when the power goes off, but they really shine when the electricity is still on. They often include blowers that pull air through an area surrounding the firebox. This heated air is then blown into the home providing quite a bit of heat. Often these inserts are so good at putting out heat that you won’t need the blower while you’re in the room. You simply turn the fan on before you head to bed and the heat will be carried through your house.

Finally, most manufacturers of wood stove inserts create several different style of insert “surrounds” so that the trim around the stove will match nearly any decor. This way you don’t have to make major changes to your existing fireplace in order to enjoy the efficient heating that these stoves will give. They are also often fairly simple to install and are available in many different sizes to fit nearly any existing fireplace. With all of the available options as well as the benefits of having a wood stove, there’s really no reason to keep from upgrading your fireplace.

Welcome to our site! Here you’ll be able to find many suppliers of all kinds of wood fireplace inserts in exactly the brand, style, and size that you’re looking for. With the wide variety of choices available, you’ll be able to find the insert you need whether you’ve got a 100-year-old stone fireplace or a contemporary design that just needs an efficiency upgrade.

Fireplace inserts are a great way to turn drafty, inefficient fireplaces into a real heating source for your home. Without significantly changing the look of your fireplace, an insert is able to better capture the heat from a wood fire and distribute this heat back into your house. These inserts operate the same way as traditional wood stoves and can better control the way the fuel (wood) burns. It’s possible with a big log or two to have a fire that will burn all night, heating your home while you sleep. No longer will your fireplace be only for looks.

Unlike oil or coal, wood is a renewable resource. Wood is also carbon neutral – as trees grow they absorb carbon dioxide from the atmosphere. This means that heating your home with a wood fire not only saves you money in heating bills, but it’s also great for the environment. Many newer fireplace inserts also include catalytic converters which divert the exhaust back through the fire to be “burned” a second time. Others contain secondary combustion devices which provide many of the same benefits without the need for periodic replacement. Both of these devices improve the efficiency of the stoves while decreasing the emissions.

Unlike traditional wood stoves, fireplace inserts rely on your existing fireplace, so the size of the firebox is limited by the existing space. This can effect the heat output of an insert somewhat, but since they are significantly more efficient it’s usually not an issue. If your existing fireplace was large enough for a fire, an insert for it will be able to put out lots more heat from the same size of fire.

In addition to retro-fitting existing fireplaces, many homeowners are building new homes with wood fireplace inserts. They don’t take up floor space like wood stoves, but still provide much of the efficiencies. Since there are many different designs available, it’s possible to fit an insert into nearly any style of home decor. Many fireplace inserts are traditional, but there are contemporary designs available as well.

In some areas, local authorities have started burn bans during times of higher air pollution. In many cases, the more efficient models of fireplace inserts are exempt from these bans due to their lowered emissions. Also many areas will give tax credits for these efficient “green” heating units which increases the savings even further.

With units that can heat areas as small as 800 square feet to monsters capable of heating a 3,000 square foot home, fireplace inserts can help turn an attractive-yet-inefficient fireplace into a green, cost-saving heater that can keep your whole house toasty-warm during the coldest winters. The best part is that they can often be installed with minimal modification to your existing fireplace or room, so the installation costs are often very reasonable as well. When you compare the costs to the long-term savings, wood fireplace inserts just makes sense.

We do collect the following personal information, however we never sell any personal information to third parties.

Each visit is recorded in a log file. As part of this record, the IP address of each visitor is stored. As with most other web sites, this information is only used for statistical purposes and in the event of criminal action, in which case the specific visitor information could be forwarded to law enforcement or service providers.

We do use third-party advertising to support our site. Some of these advertisers may use cookies, which can also send information such as your IP address and browser type to these advertisers. This information is generally used to send geo-specific advertising to visitors (i.e. New York advertisers to a New York visitor) or themed advertising (i.e. Ski resorts to someone who visits lots of ski sites). All of these technologies use non-personally identifiable information.

You may choose to turn off our cookies or third-party cookies at any time in your browser settings, however this may affect how you are able to interact with sites on the Internet. Deleting cookies does not prevent new cookies from being created the next time you visit a site.

We look forward to hearing from you!

info@wood-fireplace-inserts.net

We do not endorse any specific product or supplier, but all advertisements displayed on our site are intended to give consumers a wide choice when it’s time to make a purchase decision.

If you have questions, we may be reached via our contact page.