SERGEY ZAVARYKIN

HIGH VOLTAGE - Our Short Funny HORROR :) ENJOY!

2011-06-24T03:30:00.000-07:00

2011-05-01T19:55:00.001-07:00

I Spent 5 Days to find some good viewpoints for this video, made motorized DIY DOLLY for my 5 D Mark II, used 85mm 1.4, 58mm 2.0, 50mm 1.8 lens. I hope You will enjoy this video!

Palais Funky Club Beats 2011 March Koblenz

2011-03-26T21:05:00.000-07:00

My first night club video shot on DSLR. Sorry for the noise in a few moments. Shot almost on AV with Auto ISO. LENS: 85 1.4, 50 1.8, 58 2.0

5D Mark II

Thanks for Viewing, new LUXURY video will be soon!

Stephan Kornely Profile Demo

2011-03-22T05:01:00.000-07:00

Here is first experience video of BMX freestyle ride,
I hope you will enjoy watching!

Lovely Family

2011-03-16T19:35:00.001-07:00

Where is the Display?

2011-03-16T19:34:00.001-07:00

Koblenz Anti Nuclear Demonstrants

2011-03-14T16:54:00.000-07:00

Rhytm

2011-02-01T20:04:00.000-08:00

Sushi tutorial

2010-12-24T02:24:00.000-08:00

FLASH STROBE GRID Make it by Yourself

2010-12-02T04:45:00.000-08:00

There are a lot of manuals how to make a Flash Grid. But this have some small improvement. We will use only solid materials and will avoid such as carton.
So what do we need:

Black Foamed Plastic plate approx 400mm*100mm*3mm for the one GRID (I used Hobbycolor plate - here is a description of this material http://www.gutta.com/html/en/products/transparent-plastics/flat-materials/guttagliss-hobbycolor/) Its widely available in hobby shops or shops with materials for building.
Set of black straws for the cocktails (approx 8mm in diameter) available in supermarkets or in METRO
Transparent Glue
Black repair tape

Instruments:

Sharp Knife or Scissors to cut the straws
Dremel or Fretsaw to cut the plate
Hairdryer to form the plastic foamed plate
Shisha and Cola also could be used :)

Here we go!!!

First of all we should prepare external frame. Wrap your flash head with a sheet of paper and mark the place where it sticks together. Decide which depth of GRID you need. As for me I made it 7cm (2.5cm for the head of flash and 4.5 for the GRID cells).

As for the length I have added additional 3cm for the sure (after bending the plate become shorter).

Cut the plate using Dremel or Fretsaw, sharp knife is also applicable but be very careful!

Use Hairdryer for bending plate. Fit it to the flash so it could take the form of the flash. Make it on the edge of the table in the way the flow of hairdryer dont contact with Flash directly!(See the Picture)

After bending the last corner cut out your extra length from the plate so both ends could touch together tightly.

Cut enough of straws. In my case its about 50 pcs. 45mm length.

Apply 2 lanes of glue for the opposite sides of the each straw and fill fully the Frame.

Band the frame tightly 2-3 times minimum with the repair tape. If its not enough of width finish the cell side and than apply the same to the the flash head side.

Congratulations!!! Now we are redy to test it!!!!

Here are some test shots:

I hope This tutorial will help you! Thanks for Your Attention!
Sergiy Zavarykin

http://www.flickr.com/photos/zavarykin/
http://vkontakte.ru/super.photo
http://www.facebook.com/super.photo

First Snow in Koblenz

2010-11-30T02:06:00.000-08:00

Natural light portrait

Oxana Okhrimenko

70-200 2.8 L Canon, Natural illumination

Exif data

Camera	Canon EOS 40D
Exposure	0.002 sec (1/500)
Aperture	f/2.8
Focal Length	165 mm
ISO Speed	1250

Happy Birthday!)

2010-11-24T21:35:00.000-08:00

2 FLASH SETUP

2010-11-23T20:11:00.000-08:00

Oxana Okhrimenko

Canon 70-200 2.8 L, 2 Flashes (softbox - right front, reflector - back)

Exif data

Camera	Canon EOS 40D
Exposure	0.01 sec (1/100)
Aperture	f/2.8
Focal Length	200 mm
ISO Speed	200

Today we have visited closed pools!!!

2010-11-21T19:35:00.000-08:00

The action took place at Koblenz and was totally illegal!)

Comment from Flickr:
Hm,

ich würde schwer auf das Freibad in Vallendar auf dem Mallendarer Berg tippen ;)

Schönes Bild gefällt mir richtig gut!

Anastasiya Korotkova

Sigma 30mm 1.4, 3 Flashes (Softbox - left, Fill - on the camera, orange gel - back left behind the column[light for the BG])

Street Anti Fashion

2010-11-20T19:31:00.000-08:00

No Matter What you Wear!
Oxana Ohrimenko

Canon 70-200 2.8 L

OXYGEN

2010-11-20T19:23:00.000-08:00

Katya Piliavska

Sigma 30mm 1.4 One strobe right - Softbox

Stuttgart Fire Department museum

2010-11-18T06:57:00.000-08:00

ekaterinakonstantinovnapiliavskaya

70-200mm Canon 2.8, Natural Lighting

ekaterinakonstantinovnapiliavskaya
30mm Sigma 1.4, Natural Lighting

ekaterinakonstantinovnapiliavskaya
30mm Sigma 1.4, Softbox on the Right