AFS CONTROL SYSTEMS

DVR

noreply@blogger.com (AFS CONTROL SYSTEMS) — Sun, 13 Jan 2013 14:11:00 +0000

Digital Video Recorder :
Digital video recorder available in PC based card or Non PC based DVR Standalon. Designed in accordance to international quality norms, we offer premium quality DVR. This is a device that records video without videotape to a hard drive-based digital storage medium. The term includes stand-alone set-top boxes and software for personal computers which enables video capture and playback to and from disk. The other advantage being that we can also have the recording done using a DVR in the hard disk of the computer for up to 1 month or more depending on the requirement of the client.

Digital Video Recorder (Non PC based) :
Provided with 4-16 sensor input and 1-4 alarm output, we offer optimum quality DVR standalone that is featured with schedule and sensor detection recording and have the ability to record in individual video channel format or quad format. It record video input from the Security Camera/CCTV connected to this Unit and also provide rock-solid, easy-to-use performance which makes it ideal for multi-camera law enforcement, industrial, commercial, and individual applications

Digital Video Recorder Card(PC based) :

We at AFS also offer premium quality DVR card, that is easy to install and operate PCI based digital video recorder. This unit records live video data onto the hard drive or network drive and also include the software for setup, local, and remote viewing and documentation. Designed in accordance to international quality standards, it is provided with smart search capability, which allows one to highlight one area of a captured image and look for changes just to that area. Our low cost DVD card gives all the abilities that one would want from viewing, recording, remote internet view. It is typically one circuit board with simple software burned into the chip and is extremely stable and reliable since they contain fewer parts. The software is often written in basic machine code or Linux code which tends to be more stable than Windows software.

Remote Survelliance System :

We are also proud to state that we are one of the few acclaimed names to offer remote surveillence system through DVR standalone or DVR card which one can convert computer into a Digital Video Recorder. This unit allows one to record and display multiple cameras simultaneously from a remote location to the camera site. This unit also help in the independent configuration of each camera to activate recording when the motion is detected.

CCTV

noreply@blogger.com (AFS CONTROL SYSTEMS) — Wed, 09 Jan 2013 05:12:00 +0000

AFS CONTROL SYSTEMS is one of the few successful name in the field of CCTV Surveillance System, Access Control System, Fire Protection, Fire Detection System and Office Automation System and so on. We offer world-class CCTV Surveillance system, Fire Protection, Fire Detection, Access Control System and Office Automation System that help to monitoring, analysing of your factory, shop, office, House, Business Centre and so on.

DOME CAMERA:

Easy to install and very small this completely enclosed camera is widely used in hotels, public areas and in retail operations that demand minimal aesthetic intrusion.

Day/Night Camera(IR) :

AFS Offer finest IR camera range for day &night vision evenly can see in complete dark, low light With6-100 LED , High resolution camera.. The cameras available in Dome, C-mount & weatherproof models, can see up to 10,15,20,25,30,40,50 or 100 mtr range.

Bullet IR Camera:

For Long range distance use Bullet IR Camera camera with fixed, manual or auto iris lens with varifocal length e.g. : 3.5-8mm or 2.8-10 mm, It is useful for Industries, Big shopping stores, big size hall or departmental stores. With the help of autoiris lens & flickerless chip can control flickering due to heavy lighting or light difference due to surrounding area. Bullet IR Camera also provide the Pan/Tilt/Zoom feature manually in Zoom camera with the help of Pan/Tilt scanners. Also available in weatherproof design & with low light or day-night feature

ACCESS CONTROL

noreply@blogger.com (AFS CONTROL SYSTEMS) — Tue, 08 Jan 2013 17:29:00 +0000

AFS Control Systems has been offering commercial and domestic clients with a full access control solutions including supply, installation and maintenance of systems.

Key Pads (Low-Security): Keypads are available in surface and flush mounted options. Units offer a simple security fix, allowing a 4-8 digit codes to be programmed to release locking or offer a required signal to open doors / gates etc. These units can be easy to change codes from the programming option allow the unit to be policed as required.

Proximity Readers (Med-Security):Proximity readers offer a medium security option for any installation as a personal tag or card are carried by the users, providing the card or fob is valid the unit will allow entry to the user. If a tag or card is lost it can be removed from the memory easily allowing a replacement to be added if required.

Biometrics Finger Scanner Very High Security):Biometrics offers very high security option units can be both surface and flush mounted and interfaced to operate any access solution. The unit requires a valid fingerprint read from an individual who is in turn crossed checked from the systems database, once confirmed access is granted, with this option the information cannot be shared making this technology full proof.

EPABX

noreply@blogger.com (AFS CONTROL SYSTEMS) — Tue, 08 Jan 2013 17:09:00 +0000

Small Office / Home / Factories/ Hotel (Hybrid KTS)
ALPHA 308 KY

ALPHA 207 EXE

ALPHA 207 KY

Gamma 412 ZX

FIRE SAFETY

noreply@blogger.com (AFS CONTROL SYSTEMS) — Tue, 08 Jan 2013 16:57:00 +0000

Each fire extinguisher has its own symbolic notation, that is a special geometric symbol to make it easier for you to identify the extinguisher type. They also have some additional information necessary in case of this or that class of fire fighting.

.Class A fire extinguishers, for example, have the green triangle on them and also the special numerical rating, showing the amount of water this extinguisher holds and the amount of fire it is able to extinguish

. Class B fire extinguishers are marked with the red square and have the numerical rating indicating the approximate area of fire (in square feet) it is able to extinguish.

. Class C fire extinguishers are marked with the blue circle, but they don’t have any numerical rating. As a rule they contain the non-conductive extinguishing agent, because they are often used for electrical fire fighting. .

.Class D fire extinguishers have the yellow decagon on them and are mostly regarded as the part of chemical laboratory firefighting equipment. They also don’t have any numerical rating on them. There are also class K fire extinguishers, marked with the black hexagon. They are intended for the fighting the fire, caused by any cooking oils, fats or trans-fats combustion and are highly recommended for restaurant or cafeteria kitchens.

There is also another fire extinguishers classification based on their contents nature. According to this classification there are water, foam, dry-powder and CO2 fire extinguishers.

.Water or APW (Air pressurized water) fire extinguishers are as a rule recommended for class A fire fighting and are effective in case of wood, paper or plastic ignition. Their operation principle is based on the reducing the temperature of the burning materials below their ignition temperature. The APW units, available in the USA, as a rule, are made of stainless steel and contain 2.5 gallons (9 liters) of water. Their main advantage is their price and their harmlessness. As for the disadvantages… Well, they cannot be used in case of class B fires or electrical fires, and mostly are recommended for the class A fire fighting only. There are also Water Mist fire extinguishers, very popular in hospitals. These harmless and non-contaminant fire extinguishers contain 1.75 or 2.5 gallons of water and can be used both for class A and class C fires fighting. Foam fire extinguishers are as a rule used in case of class B fires. The foam, contained in them, reduces the oxygen around the fire. They are able to progressively put out the fire without any flashback. Depending on their contents there are AFFF (aqueous film forming foam), AR-AFFF (Alcohol-resistant aqueous film forming foams), FFFP (film forming fluoroprotein), CAFS (compressed air foam system), Arctic Fire and FireAde fire extinguishers. AFFF units are portable foam extinguishers, used for class A and class B fires fighting as well as for vapor suppression. AR-AFFF units are used in case when fuel, having caused the fire, contains alcohol, and are able to create the alcohol-resistant foam blanket. FFFP fire extinguishers are very at hand in case of alcohol-based liquids ignition, as they are able to create the heat resistant foam blanket and thus effectively put out the class C fire. CAFS, containing the special foam solution at high air pressure, are mostly used for water supply extension or (in case of A class fire or, if with the very dry foam contents, in case of B class fire) for vapor suppression. Arctic Fire extinguishers are very interesting and effective firefighting equipment solution, as they contain the special agent, able to cool and emulsify the heated and ignited materials faster than any water or foam fire extinguisher does. They are highly recommended for use in case of class A, B or D fires. FireAde extinguishers have something in common with Arctic Fire units, as they operate on the same principle, turning the ignited liquids into non-inflammable ones thanks to their special temperature reducing agent. But unlike Arctic Fire units, these ones are recommended for use in case of class A or class B fire only.

.Dry powder fire extinguishers as a rule contain some powder based agent, able to break the chemical chain reaction, sustaining the fire. There are monoammonium phosphate (“tri-class” or “multipurpose”) units, belonging to this group, that are recommended for use in case of class A, B, and C fires, sodium bicarbonate fire extinguishers, that prevent the oxygen reaching to the fire, discharging the carbon dioxide and are used on class B and C fires, or potassium bicarbonate (also famous as aka Purple-K) extinguishers, popular in oil and gas industry for their powerful effect in case of class B or C fires. The dry powder fire extinguishers also include Potassium bicarbonate & Urea Complex units, effective on Class B and C fires thanks to their agents ability for decrepitation and inhibition of fire sustaining free-radicals production on large surface areas, then Potassium Chloride, or Super-K units, containing protein-foam compatible dry chemical, very effective in case of class B or C fires, or Foam-Compatible units, containing sodium bicarbonate based dry chemical, effective on class B or C fires and using silicone as a waterproofing agent, what makes them compatible with most of synthetic foam fire extinguishers. One of the most special dry powder fire extinguishers kinds is the MET-L-KYL / PYROKYL units, contains silica gel particles, preventing the unburned fuel contact with air. It makes this type of fire extinguishers irreplaceable in case of pyrophoric liquid fires, as well as in case of any other class B fires. The dry-powder fire extinguishers are very effective and popular in many industries as the reliable fire equipment, but the disadvantage of some of them is that some of the agents they contain turn to be rather corrosive and thus must be quickly removed from the surface.

.Carbon dioxide(CO2) and other clean agents containing fire extinguishers operate almost on the same principle that the dry-powder extinguishers do. They inhibit the chemical chain reaction, sustaining the fire, but have one great advantage here – they don’t leave any residue after the discharge, what makes them invaluable as the part of firefighting equipment for offices. The fire extinguishers of this type as a rule contain halon (a gaseous agent, inhibiting the chemical reaction of fire and effective in case of class B or C fires) or CO2, able to reduce the oxygen around the fire area. They can also contain the mixtures of inert gases, like Inergen and Argonite.