Bernard Newbury - Latest Products

Jay Cee Oil Filter Brackets

These oil filter brackets that fit #4 exhaust studs are designed to accept most filter housings and will allow engine removals without disconnecting the oil lines and filters. Made from 6061-T1 aluminium with a red or blue anodised finish. Fits VW Type 1.

Jay Cee 4 Puck Clutch Disc

Don't try to run it on the street because it's got the radical race car in or out no messing around action." 4 Feramic Discs are riveted and heat bonded to a heat-treated steel center to provide race car performance launch. Fits all VW engines with a 200mm flywheel

Simpson Hooded Sweatshirt (Grey)

Simpson grey hooded sweatshirt with black emboidered logo. Large only

Simpson T Shirt (Grey)
Simpson grey T shirt. Small logo on front with large logo on back. Logo in red and white. Large only

Simpson T Shirt (Black)
Simpson black T shirt with small logo pocket on front. Large logo on back. Logo in red and white. Large only

Empi Dash Plaque
Aluminium plaque measures 75mm x 33mm with black background and Empi logo. Reads "Do not lower windows at speeds in excess of 120 mph". Fits all vehicles.

Key Ring (8 Ball)
"8" Ball key ring that will match the "8" Ball Door Lock Pulls (Part # JE526).

Scat Weber 48IDA Tall Inlet Manifolds
Tall 48 IDA manifolds made from 356 T6 aluminium designed to harness the full potential of these carburettors and can be ported to match heads. Complete set with studs and gaskets etc. Fits all Type 1 cylinder heads. Ships DHL

Scat Billet Alternator/Dynamo Pulley Inserts
These inserts are machined from 6061-T1 aluminium with a diamond cut machine finish that will give your top pulley that custom look. Will not fit billet pulley (part# SA465).Fits all stock aircooled VW Alternator/Dynamo pullies.

Scat Billet Oil Pump Cover
New generation of billet oil pump covers. These full flow covers are precision machined from 6061-T1 aluminium that will not leak under pressure. Efficient design that will clear all pulleys and features a 3/8 NPT thread for full flow fitting. Barbed fittings available in Fittings Section. Fits Type 1 oil pump.

Scat Oil Filler (Billet)
These highly polished fillers make for easy oil fills and includes breather vent. Complete with polished cap, barbed fitting and O ring. Fits VW Type 1 case.

Scat Fuel Filter (In Line Clear)
In line fuel filter with a washable element and a high impact transparent case, which is unaffected by fuels and extreme temperatures. Fits all engines with up to 1/4" fuel line.

OCE Solid Engine Mount/Yoke Kit
This OCE solid yoke replaces the engine/gearbox rubber pad mounts with an extremely heavy-duty part that ties frame horns together with transmission to provide maximum rigidity. Also includes front nose cone solid mount. Plated finish. Due to the weight this item can only be shipped DHL. Fits all VW T1 bugs.

OCE Solid Mid Gearbox Mount
For greater support but a harsher ride than the rubber transmission mount (part#GE1004/5) this mount welds directly to the frame horns and is complete with all hardware. Plated finish. Fits all VW T1 Bugs 1961>

OCE Fuel pump Block Off Plate
This part is used to block off the stock fuel pump location hole and has a boss that is tapped with 1/4 NPT thread. If used as a breather outlet this boss can be opened. Complete with gasket. Barbed oil line fittings available in our Fittings Section. Fits all VW T1 engines.

OCE Oil Cooler Block Off
When the normal oil cooler is no longer needed, this block off adaptor is a must. as it allows oil to re enter the case immediately. Casting is tapped for an oil pressure or temp sending unit. Hardware and gasket included. Fits all VW Type 1 case

Engine Lid Cal Clips
To make your life easy when working on your engine, the best way is to remove your deck lid using these clips. Very easy to fit, the ever-popular Cal Clips are complete with full fitting instructions. Priced per pair. Fits all VW bugs.

Neal Front Disc Brake Kit
These state of the art front disc brake kits will upgrade your dated drum brakes to match the performance of to-days hot VW's. Complete kits CNC machined to the highest tolerances include drilled discs, all brackets, hubs, bearings and seals etc makes this the best kit available. Fits Bugs and Ghia only with combinations of stock or lowered spindles with link pin or ball joint beams running stock VW 4 or 5 stud or Porsche stud patterns. Special order only. Please allow 14>21 days. A 50% deposit will be deducted from your credit card and the balance will be deducted prior to shipping your order. Ships DHL

Moto Lita Steering Wheel (Wood)
15"dished Moto Lita steering wheel made from hand finished marine timber with polished aluminium spokes complete with polished billet aluminium boss. Supplied with black plastic horn push but can be supplied with optional polished billet horn push as picture. Please choose from available options. Fits all T1, bug, Ghia, T2, and T3. Ships DHL. SPECIAL ORDER PART Please telephone for details.

Please order by boss #
Boss# MLF7-- Type 1/3 from 1959

Boss# MLF7ATK-- Type 2 Split

Boss# MLF77 -- Type 2 Bay 1974>1979

90' Fitting
Special brass 3/8" NPT male to female 90 degree fitting that has clearance to fit crank case. Fits all T1 case's, oil pump covers, and filter adaptors.