ALL ROUNDER

Experiments in Robot Formation Control with an Emphasis on Decentralized Control Algorithms (Mechanical Project)

2011-10-18T18:01:00.000-07:00

In this project, several algorithms and experiments involving the control of robot formations are presented. The algorithms used were focused on decentralized control. The experiments were implemented on two different experimental testbeds consisting of teams of wheeled mobile robots. The robots used are described along with their sensors and supporting hardware. Also, there is a discussion of the programming framework used to build the control software.

The first control algorithm and experiment uses a robust consensus tracking algorithm to control a formation of robots to track a desired trajectory. The robots must maintain the correct formation shape while the formation follows the trajectory. This task is complicated by limited communication between the robots, and disturbances applied to the information exchange. Additionally, only a subset of the robots have access to the reference trajectory.

In the second experiment, the same algorithm was re-implemented in a decentralized way, which more effectively demonstrated the goals of the algorithm. The second algorithm involves controlling a formation of robots without a global reference frame. In order to accomplish this, the formation description is reformulated into variables describing the relative positions of the robots, and vision-based measurements are used for control.

A homography-based technique is used to determine the relative positions of the robots using a single camera. Then a consensus tracking controller similar to the one used previously is used to distribute the measured information to all of the robots. This is done despite the fact that different parts of the information are measured by different agents.

CLICK N THE LINK TO DOWNLOAD OR VIEW FULL PROJECT REPORT

Project Report on Corporate Finance (Management Project)

2011-10-18T17:27:00.000-07:00

Over the past twenty years, write-offs have grown in popularity. With the increased usage of write-offs, it is becoming more important to understand the mechanisms behind why companies take write-offs and how write-offs affect company performance.

In this paper, I examine the cross-sectional determinants of the decision to take write-offs. I use a hand-collected dataset on write-offs that is much more comprehensive than existing write-off datasets. Contrary to much hype and scandals surrounding a few write-offs, I find that quality of governance is positively related to write-off decisions in the cross-section. My results also suggest that poor governance companies wait to take write-offs until it becomes inevitable, while well-monitored companies take write-offs sooner. As a result, the charge is substantially larger than the average write-off charge.

When these poor governance companies announce write-offs, the announcement generates negative abnormal returns. However, when good corporate governance companies announce write-offs, the charge is substantially smaller than the average charge. These well-monitored companies take write-offs immediately following a problem. Following the write-off announcements of these types of companies, average announcement day effects exceed a positive six percent. These results suggest that companies with quality monitoring mechanisms use write-offs in a manner that is consistent with enhancing shareholder value.

In my second essay I examine the effect of write-off announcements on the stock market liquidity of firms taking write-offs from 1980 to 2000. I find that there are substantial improvements in stock market liquidity following corporate write-offs. Spreads decrease and turnover volume increases after write-off announcements, which indicates an improvement in liquidity. The liquidity improvement is greater for better governed companies. I decompose bid-ask spreads and show that adverse selection costs decrease substantially as market participants respond to the write-off announcement. The evidence suggests a liquidity benefit of write-offs that must be weighed against any other perceived cost of write-offs. Such a liquidity benefit may validate that write-offs convey favorable information about the firm.

click on the link to download full project:

click on the link to download/know full project report

The Role of DAP-Kinase in Modulating Vascular Endothelial Cell Function Under Fluid Shear Stress (Biomedical Project)

2011-10-11T19:21:00.001-07:00

Atherosclerosis preferentially develops in vascular regions of low or disturbed flow and high spatial gradients. Endothelial cells that line the vessel walls actively participate in translating mechanical stimuli, shear stress due to fluid flow, into intracellular signals to regulate cellular activities. Atherosclerosis is a chronic disease. During its development, a cascade of inflammatory signals alters the arterial endothelial homeostatic functions.

Death-associated protein (DAP) kinase and its correlated pathway have been associated with cell apoptosis, turnover, and cytoskeleton remodeling in cellular networks, ultimately leading to changes in cell motility and vascular wall permeability. DAP-kinase is also highly regulated by inflammatory triggers such as TNF-α. This thesis investigates DAP-kinase modulation due to shear stress, and the role of DAP-kinase activity in endothelial responses toward applied shear stress. Using bovine aortic endothelial cells (BAEC), DAP-kinase expression is demonstrated in both sheared (10 dynes/cm2) and static conditions. Overall DAPK expression increased with extended shearing, while the presence of phosphorylated DAPK decreased with applied shear stress, as demonstrated in Western blot analysis.

In correlation, DAPK RNA expression profiles were explored to understand pre-translational behavior and to understand just how shear stress influences DAPK expression over time. There is a temporal increase in DAPK mRNA, occurring at earlier time points when compared to DAPK protein expression, displaying the precedence of mRNA expression leading to increased translation into protein.

From our apoptosis assay results, shear stress reduces apoptotic and late stage/necrotic cell fractions. The exposure of shear stress potentially plays a role in inhibiting apoptosis activation and TNF-α induced death cascade.

Overall, the apoptosis activity influenced by shear further exhibits a possible connection between shear stress and apoptosis inhibition. The shear stress ultimately decreases overall apoptosis, while DAPK expression is increased. Therefore, DAPK may have a function in other possible mechano-transduction cascades, when endothelial cells are exposed to constant shear. Our data suggests shear stress modulation of DAP-kinase expression and activity, and the potential crosstalk of mechano-transduction and DAPK/apoptosis pathway, may lead to further understanding the responsibility of DAPK in endothelial cell function.

click to download full project

Study of Emotions and Behavioral Intentions in Upscale Restaurants (Management Project)

2011-10-11T19:11:00.000-07:00

The physical environment may be an important determinant of customer satisfaction and subsequent behavior when services are consumed primarily for hedonic purposes and customers spend moderate to long periods of time in the physical surroundings. An example of this phenomenon would bein an upscale restaurant setting.

This study explored the domain of the physical environment in an upscale restaurant context to develop a DINESCAPE scale. Relevant literature was reviewed on architecture, environmental psychology, psychology, operations management, and marketing, highlighting empirical and theoretical contributions. Conceptualization and operationalization of the DINESCAPE dimensions is presented, and the procedures used in constructing and refining a multiple-item scale to assess DINESCAPE in an upscale restaurant setting are described. DINESCAPE is a six-factor scale that was developed to measure facility aesthetics, ambience, lighting, service product, layout, and social factors. Evidence of the scale’s reliability, validity, and factor structure is presented, along with potential applications of the scale.

The second phase of the study attempted to build a conceptual model of how the DINESCAPE factors influenced customers’ behavioral intentions through their emotions. The Mehrabian-Russell environmental psychology model was adopted to explore the linkage of the six dimensions of DINESCAPE to customers’ emotional states (pleasure and arousal) and the linkage between pleasure and arousal with customers’ behavioral intentions. Structural equation modeling was used to test the causal relationships among the hypothesized relationships.

Results revealed that facility aesthetics, ambience, and social factors affected the level of customers’ pleasure and ambience and social factors influenced the amount of arousal. In addition, pleasure and arousal had significant effects on subsequent behavioral intentions in the context of upscale restaurant. Finally, implications for restaurateurs and researchers were discussed.

click to download full project

Development of Model for Large-Bore Engine Cooling Systems (Mechanical Project)

2011-10-09T18:16:00.000-07:00

The purpose of this project is to present on the development and results of the cooling system logic tree and model developed as part of the Pipeline Research Council International, Inc (PRCI) funded project at the Kansas State National Gas Machinery Laboratory. PRCI noticed that many of the legacy engines utilized in the natural gas transmission industry were plagued by cooling system problems.

As such, a need existed to better understand the heat transfer mechanisms from the combusting gases to the cooling water, and then from the cooling water to the environment. To meet this need, a logic tree was developed to provide guidance on how to balance and identify problems within the cooling system and schedule appropriate maintenance.

Utilizing information taken from OEM operating guides, a cooling system model was developed to supplement the logic tree in providing further guidance and understanding of cooling system operation. The cooling system model calculates the heat loads experienced within the engine cooling system, the pressures within the system, and the temperatures exiting the cooling equipment. The cooling system engineering model was developed based upon the fluid dynamics, thermodynamics, and heat transfer experienced by the coolant within the system. The inputs of the model are familiar to the operating companies and include the characteristics of the engine and coolant piping system, coolant chemistry, and engine oil system characteristics. Included in the model are the various components that collectively comprise the engine cooling system, including the water cooling pump, aftercooler, surge tank, fin-fan units, and oil cooler.

The results of the Excel-based model were then compared to available field data to determine the validity of the model. The cooling system model was then used to conduct a parametric investigation of various operating conditions including part vs. full load and engine speed, turbocharger performance, and changes in ambient conditions. The results of this parametric investigation are summarized as charts and tables that are presented as part of this thesis.

click on the below link to download full project:

http://krex.k-state.edu/dspace/bitstream/2097/8721/3/ClintKendrick2011.pdf

Performance evaluation of J2EE & .NET Web Services interacting with a .NET Client (Computer Project)

2011-10-09T18:12:00.000-07:00

The objective of this project is to build an e-commerce website using ASP.NET as well as J2EE technologies. Visual Studio 2005 provides a great IDE to build seamless front end layer for the websites with minimum effort. Hence, it is used to build the presentation layer. The business logic layer is developed in ASP.NET 2.0 and J2EE, exposing the functions as web services. Two similar clients have been developed in ASP.NET. These two clients invoke the .NET and J2EE web services.

The two similar websites are subjected to testing for correctness and performance. Stress and load testing is performed thoroughly on the website. A detailed analysis of the results is done using the response times and throughputs from various tests.

This report proves that we can build a website using a presentation tier developed in ASP.NET consuming any of the two technologies’ (ASP.NET & J2EE) web services. This proves to be very useful in scenarios where we need the best overall user experience regardless of the technology, to replace or extend an existing business tier by using a different technology.

to download full project click on below link:

http://krex.k-state.edu/dspace/bitstream/2097/401/1/RajasanjeevkumarNakka.pdf

A Real-Time Control System for a Frequency Response-based Permitivity Sensor (Electronics Project)

2011-10-09T18:03:00.000-07:00

Permittivity is an important property of dielectric materials. By measuring the permittivity of a material, it is possible to obtain information about the material’s physical and chemical properties, which are of great importance to many applications.

In this study, a realtime control system for a frequency-response (FR) permittivity sensor was developed. The core of the hardware was a kitCON167 microcontroller (PHYTEC America, LLC), which controlled and communicated with peripheral devices. The system consisted of circuits for waveform generation, signal conditioning, signal processing, data acquisition, data display, data storage, and temperature measurement. A C program was developed in the TASKING Embedded Development Environment (EDE) to control the system.

The control system designed in this study embodied improvements over a previously designed version in the following aspects: 1) it used a printed circuit board (PCB); 2) the measurement frequency range was extended from 120 MHz to 400 MHz; 3) the resolution of measured FR data was improved by using programmable gain amplifiers; 4) a data storage module and a real-time temperature measurement module were added to the system; 5) an LCD display and a keypad were added to the system to display the FR data with corresponding frequencies and to allow users to enter commands.

Impedance transformation models for the sensor probe, the coaxial cable that connects the control system with the sensor probe, and the signal processing circuit were studied in order to acquire information on the permittivity of measured materials from measured FR data. Coaxial cables of the same length terminated with different loads, including an open circuit, a short circuit, a 50 resistor, and a 50 resistor paralleled by a capacitor, were tested. The results indicated that the models were capable of predicting the impedances of these specific loads using the FR data. Sensor probes with different sizes and coaxial cables with two different lengths terminated with the same sensor probe were also tested. The results were discussed.

Additional tests for the gain and phase detector were conducted to compare FR data measured by the gain and phase detector with those observed on an oscilloscope.

to download full project click on the below link:

http://krex.k-state.edu/dspace/bitstream/2097/12199/1/NingTang2009.pdf

HAPPY FRIENDSHIP DAY

2011-08-06T18:36:00.000-07:00

Friendship is like a perennial river which flows forever. It may change it's path but will never ever dry up.HAPPY FRIENDSHIP DAY

jntu-hyd 3-1 (R-07) supply results

2011-07-05T06:57:00.000-07:00

please click o the below link to see results
http://jntuh.ac.in/results/htno.php?ecode=1028

Piezo-electric Power Scavenging for Mining Applications (ECE/EEE Project)

2011-06-17T18:05:00.000-07:00

Wireless sensors are usually designed to run on batteries. However, as the number of sensors increases and the devices decrease in size, there is clearly a need to explore alternatives to battery power for wireless sensors. Reliable, efficient and environmentally friendly energy harvesting methods could be adopted to design and build a new electronic device that could be used to replace or supplement batteries in wireless sensors.

This thesis focuses on potential ambient sources of power that can be harvested to run low power wireless sensors in mining environments. It discusses several techniques for converting energy from such sources into useful electrical power. In particular, piezoelectric power conversion technique is described in detail.

Wireless sensor or sensor networks hold significant potential in the mining environment. The need for deployment of such sensor networks is increasing daily as mining companies are looking to adopt the system developed in the “Intelligent Mine – Technology Program (IMTP)”. The objectives of the IMTP are to increase the mine’s productivity, decrease the total costs and to improve the working conditions. To complement these objectives, there have to be improved methods for powering sensor devices to deploy them in large numbers.

Drilling is a crucial component in both underground and surface mining. Water jet assisted drilling is an example of a new drilling technology employing wireless sensors. There are various forms of energy that could potentially be used to power wireless electronic sensors provided the waste energy can be tapped in an intrinsically safe way. In this particular project, the required power to run sensors could be generated by converting mechanical vibration produced from water jet assisted drilling into electrical energy with an intrinsically safe circuit. Various power scavenging methods were researched, but vibration-to-electricity conversion using piezo-ceramic material was selected as the most promising method for this project.

Piezo-based energy conversion is not normally good for mining applications because of intrinsic safety issues. In the case of water jet assisted drilling, however, the environment is much more suitable for piezo-electric conversion. A detailed computer model for this type of power conversion has been developed. The mechanical model of the vibration spectrum is based on test data from the Contents 2 CRC-Mining group. A power conversion circuit has been built, detailed circuit simulations studied and the experimental results are demonstrated.

An example vibration scenario consisting of (20×10^-6)rms strain is considered. Based on this, and a detailed model of a 70mmx25mm PZT piezoelectric patch with 0:2mm thickness, our computer simulation studies and experiments demonstrate the ability to harvest up to 210mW of power.
Source: The University of Newcastle
Author: Upendra K. Singh

to down load full project click on below link:

http://www.mediafire.com/file/joj5b9c4ag8eu2v/ATTACHMENT02.pdf

Nonlinear Constrained Component Optimization of a Plug-in Hybrid Electric Vehicle (Mechanical Project)

2011-06-17T17:59:00.000-07:00

Today transportation is one of the rapidly evolving technologies in the world. With the stringent mandatory emission regulations and high fuel prices, researchers and manufacturers are ever increasingly pushed to the frontiers of research in pursuit of alternative propulsion systems. Electrically propelled vehicles are one of the most promising solutions among all the other alternatives, as far as; reliability, availability, feasibility and safety issues are concerned.

However, the shortcomings of a fully electric vehicle in fulfilling all performance requirements make the electrification of the conventional engine powered vehicles in the form of a plug-in hybrid electric vehicle (PHEV) the most feasible propulsion systems. The optimal combination of the properly sized components such as internal combustion engine, electric motor, energy storage unit are crucial for the vehicle to meet the performance requirements, improve fuel efficiency, reduce emissions, and cost effectiveness.

In this thesis an application of Particle Swarm Optimization (PSO) approach to optimally size the vehicle powertrain components (e.g. engine power, electric motor power, and battery energy capacity) while meeting all the critical performance requirements, such as acceleration, grade and maximum speed is studied. Compared to conventional optimization methods, PSO handles the nonlinear constrained optimization problems more efficiently and precisely. The PHEV powertrain configuration with the determined sizes of the components has been used in a new vehicle model in PSAT (Powertrain System Analysis Toolkit) platform. The simulation results show that with the optimized component sizes of the PHEV vehicle (via PSO), the performance and the fuel efficiency of the vehicle are significantly improved.

The optimal solution of the component sizes found in this research increased the performance and the fuel efficiency of the vehicle. Furthermore, after reaching the desired values of the component sizes that meet all the performance requirements, the overall emission of hazardous pollutants from the PHEV powertrain is included in the optimization problem in order to obtain updated PHEV component sizes that would also meet additional design specifications and requirements.
Author: Emrah Tolga Yildiz
Source: Purdue University

A Study on Retail Management with Big Bazaar (MBA Project)

2011-06-17T17:57:00.000-07:00

“Retailing is a distinct, diverse and dynamic sector” . “It is an activity of enormous economic significance to most developed nations”. It generates revenue and wealth for nation, encourages investments and brings technological advancements. Stated that “it brings employment and creates wealth of the economy”. “It is a vibrant part of our changing society and a major source of employment”

Retailing performs activities at larger level so it requires massive manpower to handle and manage it’s operations. Retailing also helps society in general by providing goods and services in reasonable price and increasing their standards of living. “Retailing activity can be viewed as a significant contributor to the economy in general”.

Retailing is the set of activities that markets products or services to final consumers for their own personal or household use. It does this by organizing their availability on a relatively large scale and supplying them to consumers on a relatively small scale.” Retailing makes products and services available in large quantities. Retailers produce or order the products/services in bulk so they can take advantage of economy of scale and thus they can formulate competitive pricing strategies. Products and services are generally sold through the store or on the internet.

Introduction to Retail Industry:

The first decade of modern retail in India has been characterized by a shift from traditional kirana shops to new formats including department stores, specialty stores hypermarkets, and supermarkets and across a range of categories. Modern retail formats have mushroomed in metros and mini-metros. In the last few years, modern retail has also established its presence in the small cities, exposing residents to shopping options like never before.

Some of these stores are branded stores(exclusive showrooms either owned or franchised out by a manufacturer) , specialty stores(greater choice to consumer, comparison between brands is possible) , department stores/supermarkets (one stop shop catering to varied consumer needs) , hyper-mart (low prices , vast choice available including services such as cafeterias.) , shopping malls (variety of shops available to each other ).

to download full project click on the below link:

http://www.mediafire.com/file/7eno6z5jc3ment4/p-1406--retail_mgmt.doc

Books and Library Lending Management in PHP (Software Project)

2011-06-17T17:54:00.000-07:00

Basically, this application is used to manage books in a library. It can be used to lend or return books, keep track of loan history and pattern.

to download the php source code click on the below link:

http://www.mediafire.com/file/pn3b6b6hugm02t7/p-1221--books_and_library_lending_management.zip

interviewing techniques

2011-06-10T19:15:00.000-07:00

to download click on the below link:
http://www.mediafire.com/file/854tqeigqsqpub6/interviewing.pdf

50 Common Interview Questions and Answers

2011-06-07T17:55:00.000-07:00

50 Common Interview Questions and Answers :

Review these typical interview questions and think about how you would answer them. Read the questions listed; you will also find some strategy suggestions with it.

1. Tell me about yourself:

The most often asked question in interviews. You need to have a short statement prepared in your mind. Be careful that it does not sound rehearsed. Limit it to work-related items unless instructed otherwise. Talk about things you have done and jobs you have held that relate to the position you are interviewing for. Start with the item farthest back and work up to the present.

2. Why did you leave your last job?

Stay positive regardless of the circumstances. Never refer to a major problem with management and never speak ill of supervisors, co- workers or the organization. If you do, you will be the one looking bad. Keep smiling and talk about leaving for a positive reason such as an opportunity, a chance to do something special or other forward- looking reasons.

to download full file click on the below link:
http://www.mediafire.com/file/sxqyi1qybv48dd3/50%20Common%20Interview%20Questions%20and%20Answers.docx

General Tips To Overcome An Interview

2011-06-07T17:52:00.000-07:00

Exclusively for Campus/Off-campus

So what if you are not a mountaineer. Or a keen hiker. You still cannot treat your interview like a careless morning trot along a jogger's path. Your jaw-jaw at the interview table is nothing less than a cautious climb up a mountain trail--which begins around your early childhood and meanders through the years at the academia before reaching a new summit in your career. And as you retrace your steps down memory lane make sure that you post flags at important landmarks of your life and career, so that you can pop them before the interview panel scoops them out of you. You don't want to be at the receiving end, do you?

Face the panel, but don't fall of the chair in a headlong rush-and-skid attempt to tell your story. Take one step at a time.Don't go into unnecessary detail about how you aced your business math midterm in your sophomore year at accounting school. Here are a few preparation tips from the Team of Freshersworld.com that books on interviews sometimes overlook. Remember, as a fresher you do not have anything to loose but to gain.

TYPICAL QUESTIONS THAT AN INTERVIEWER WOULD ASK

1.Tell me about yourself

The most often asked question in interviews. You need to have a short statement prepared in your mind. Be careful that it does not sound rehearsed. Limit it to work/Study-related items unless instructed otherwise. Talk about things you have done well at your

to download full file please click on the below link
http://www.mediafire.com/file/rgv7wrngg882znn/General%20Tips%20To%20Overcome%20An%20Interview.docx

INFOSYS Test PAPER ON 6th MARCH AT KOLKATA(selection procedure)

2011-06-03T17:41:00.000-07:00

The candidates selected in the infosys test are provided training at Infosys Training Centre Campus at Mysore.
No of Colleges – 5
Total Students – 375
Students who cleared Aptitude Test – 25
Students Selected in interview – 14

Selection Procedure:

Students from any stream can sit in Infosys. There are no direct Technical rounds in Infosys.

The whole Selection Process contains two section Aptitude test.

>Analytical & Logical reasoning: (30 questions : Time allowed 40 minutes)

>English section: (40 questions : Time allowed 35 minutes)

The cutoff is said to be 60% cutoff in first Section, & 50% from second section. There is no scope for cheating in written exams.

After Aptitude test the HR Interview is there.
For Verbal & Non verbal- RS Aggarwal is good.
Analytical & Logical reasoning
I am giving the style of the paper and the number of questions of each type.
>Syllogism: (5 questions) – These are very easy to solve.

Question Pattern: Statement: All A is B. Some B is C.

>Figure Series: (5 questions)

>Dice & Cube Problem: (5 questions) – In The aptitude questions, the problem was as follows:

A cube is given and is painted on six sides with six different colours.

Red is adjacent of yellow and green.

Pink is opposite of yellow.

Brown is in the bottom face.

Now Q:1) Which color is in the top face?

Q:2) Which color in the face opposite of Red?

There is a cube and it is cut in 27/64/125 equals pieces of cube. Now two faces are colored with black, two green, two red.

Q: No of cubes which are painted three faces. No. of uncolored cubes.

>Infosys Puzzles Questions: (5 questions) – Puzzles makes everyone puzzeled. Read the question carefully draw the diagram, matrix and put the data one by one according to given information.

>Data Interpretation: (5 question) – A chart, graph, table will be given. You have to solve some problems on statistics. Its is too time consuming process. Follow the Option elimination process.

English Section:

>Two passages and 5 question from each passages:

>Sentence Correction:

>Fill in the Blanks: English Section questions on preposition, phrase, idioms.

>Theme Detection.

Infosys HR Interview:

Keep yourself cool. Be friendly and polite with them.

First Interview

Me: Good afternoon sir, May I come in?

HR: Yes , and be seated.

Me: Thank you sir.

HR: R u tired for waiting long time?

Me: Not at all sir.

HR: What is the meaning of your name?

Me: Told

HR: Show your group work capability.

Me: Told about the project.

HR: Which quality of a leader do you find in yourself.

Me: Told about my cooperation, taking on challenges, etc.

HR: What was the crucial decision in your life that changed yourself?

Me: Told something. I hadnt prepared. Say anything positive.

Questions on teamwork and leadership.

Second interview

HR: Sorry for taking your second interview.

Me: My pleasure sir. ( Show good behaviour )

HR: What is your week point?

HR: What is your reaction when one rectify ur week points?

HR: How do you react when a misunderstanding happens in group work?

HR: Give some example on you real life.Etc.

HR: what is your favourite (best) subject?

Now few questions about your best subject. Tell any subject (they dont care much about it)

So they may ask you to tell about anything currently going on in that field.

HR: nice interview.

And the hand shake takes place..

Teaching Interview Skills To Remember

2011-06-03T17:37:00.000-07:00

Teacher job interviews are the point at which all of our ambitions to a certain job come together and crystallize in one place, where we can give the performance of our life and emerge with the job, or fail to really get going and end up without the job. Our teacher interview answers need work if we are to ensure ourselves a shot at the job which, in many cases, we have dreamed of doing since we were very young. Honing your abilities is necessary before such time as you walk into a teaching job interview, and the best way to hone your teaching interview skills is to practice before the big day arrives.

LatestExams.com Recommends you to Download “Teaching Job Interview Secrets” Guide to ace the interview where hundreds of candidates compete for the same teaching job.

The Most Important Teaching Interview Skills

It is essential to remember that getting a teaching job relies on your entire recruitment process being as good as it can be, from training through application to interview. Without a decent resume and covering letter it is hard to get a secondary teaching interview, and even if you do the best teaching interview skills imaginable will not get you the job if someone else performs equally well. But there are definitely things you can work on to make sure your answers to teacher interview questions put you in the forefront of the interviewers’ minds. Making sure you have the key teaching interview skills covered will give you the best chance of winning the job.

Your teaching interview skills plan should involve making sure you are at your best in terms of:

Explaining Yourself. If you can convince the panel that you are worth considering – not by telling them, but by showing evidence in your personal qualities that you are – then you stand a good chance. If you can make a persuasive case that you know how to communicate, they’ll believe you can do the same in a classroom. This is where teaching skills and teaching interview skills meet.

Recovery. We’ve all been in a situation where we are under scrutiny, and made a mistake. We’re human, and humans make errors no matter the preparation – that’s nothing to be ashamed of. It is how you respond to the error that really matters. One of the most important teaching interview skills is your recovery abilities. Having made a little faux pas in a teaching interview, can you turn it around and while acknowledging the mistake show that it hasn’t cowed you?

Presentation. Presentation in an interview does not just come down to your suit being ironed and your hair being brushed – although it certainly helps. One of the best interview tips for teachers is as follows: presentation is also in how you answer a question, how you speak, smile and make eye contact. The interview panel will be looking to visualize you in front of a class. Make it easier by using your teaching interview skills to look like a teacher.

Humility. You don’t have to show pathetic levels of gratitude for the fact that the interview panel have deigned to invite you to their Art teacher interview. What you do need to do is demonstrate a knowledge of the fact that you aren’t perfect – but are aware that you would be an asset. One of the key teaching interview skills is the ability to appear confident without appearing arrogant.

These are just some of the major teaching interview skills that will help you get the job. There are others, but these four are an excellent place to start.

important exam dates

2011-06-03T17:30:00.000-07:00

ED-CET June 4th, 2011

LAWCET June 11th, 2011

Q-Learning for Robot Control (Robotics Project)

2011-06-03T17:26:00.000-07:00

Q-Learning is a method for solving reinforcement learning problems. Reinforcement learning problems require improvement of behaviour based on received rewards. Q-Learning has the potential to reduce robot programming effort and increase the range of robot abilities.

However, most current Q-learning systems are not suitable for robotics problems: they treat continuous variables, for example speeds or positions, as discretised values. Discretisation does not allow smooth control and does not fully exploit sensed information. A practical algorithm must also cope with real-time constraints, sensing and actuation delays, and incorrect sensor data.

This research describes an algorithm that deals with continuous state and action variables without discretising. The algorithm is evaluated with vision-based mobile robot and active head gaze control tasks. As well as learning the basic control tasks, the algorithm learns to compensate for delays in sensing and actuation by predicting the behaviour of its environment. Although the learned dynamic model is implicit in the controller, it is possible to extract some aspects of the model. The extracted models are compared to theoretically derived models of environment behaviour.

The difficulty of working with robots motivates development of methods that reduce experimentation time. This research exploits Q-learning’s ability to learn by passively observing the robot’s actions—rather than necessarily controlling the robot. This is a valuable tool for shortening the duration of learning experiments.

Author: Gaskett, Chris

Source: The Australian National University

to download full project click on the below link:
http://www.mediafire.com/file/ceuhj2fs3silhb9/02whole.pdf

Reinsurance: Insurance to Insurers (MBA Finance Project)

2011-06-03T17:19:00.000-07:00

Reinsurance is a means by which an insurance company can protect itself against the risk of losses with other insurance companies. Individuals and corporations obtain insurance policies to provide protection for various risks (hurricanes, earthquakes, lawsuits, collisions, sickness and death, etc.). Reinsurers, in turn, provide insurance to insurance companies.
Reinsurance helps primary insurers to reduce their capital costs and raise their underwriting capacity since major risks are transferred to reinsurers’’; the primary insurer no longer needs to retain capital on its balance sheet to cover them. Reinsurance thus serves the primary insurer as an equity substitute and provides additional underwriting capacity. This indirect capital is cheaper for the primary insurer than borrowing equity, since reinsurers can offer to assume risks at more favorable rates thanks to their superior risk diversification.

The additional underwriting capacity permits the primary insurers to assume additional risks which without reinsurance they would either have to refuse or which would compel them to provide a lot more of their own capital. In a globalized world, in which potential financial claims are steadily rising and in which the limits of insurability are being constantly extended, reinsurance thus assumes a major significance for the whole economy.

to downloadfull project click on the below link:
http://www.mediafire.com/file/ppqf2h2lh1lpy0c/p-1395--Reinsurance.doc

The reuse of Design rules by Product and Process documentation – A descriptive case study (Mechanical Project)

2011-06-03T17:15:00.000-07:00

The problem of automating design processes is often related to the difficulties with updating, maintaining and sharing the information. This thesis provides a descriptive case study of a large company’s design automation process and the difficulties of reusing already existing solutions.
The main purpose of the thesis has been to trace a product family from its specification of demands to a complete design program. An account is given of the documentation written during the product development process, of the different data storage and also how the company has implemented design automation in their process.

The results have been reached through a series of interviews as well as previous studies and material from the company. From an analysis of the results proposed solutions are given and focus on the low quality the documentation has and how it is a result of a rapid growth within the company.

Author: Andersson, Emma

Source: Jönköping University

to download full project click on the below link:
http://www.mediafire.com/file/b955a9m9ep73c69/FULLTEXT01.pdf

JNTU Kakinada IV B.Pharm II Semester Regular/Supplementary Examinations (R07, NR, OR) - May 2011.

2011-06-01T17:32:00.000-07:00

to know results click on below link:
http://www.results.manabadi.co.in/KJNTU-4PHARMA-2SEM-01062011.htm

RETINA: A Real TIme Navigation System (Computer Project)

2011-06-01T17:24:00.000-07:00

Mobile computing systems are playing a more and more important role in everyday life and applications based on both local and wide area distributed wireless networks are being launched all the time. One of the more challenging applications is real-time traffic navigation, and this thesis focuses on our experience in the design and implementation of a REal-Time Traffic Navigation System (RETINA).

There are a large number of challenging issues involved in designing a system that can support navigation requests and meet the arrival deadlines. These include the management of real-time traffic data, the execution of navigation requests and the monitoring of the best paths for these requests. Focusing on minimizing the probability of missing arrival deadlines as well as reducing the overhead for monitoring the best path, a replicated directed graph approach for searching the best path in which the servers cache traffic data from other servers is proposed. Since the accuracy of this approach depends on the currency of the cached traffic data, a number of approaches for refreshing this data are explored and an adaptive push and pull technique is proposed.

RETINA was implemented using two basic components: database servers and mobile clients. The server program is implemented in VC++ 6.0 on Windows NT and the 2 client program is implemented using both VC++ 5.0 for Win CE 3.0 and VC++ 5.0 on Windows 2000. The server process consists of multiple flags for different functions including servicing requests from mobile client and for system management. A SQL server is connected to the server program at each site and it maintains a database containing the road connections of a district in Hong Kong. A simulated process is defined at the server to create new traffic data values randomly for the road segments maintained by the system. Each client machine, PC or handheld PC, is pre-loaded with a set of maps for the roads defined in the database servers. The client program supports search for best paths, as well as a number of location-dependent requests.

In addition, a number of simulation experiments were used to explore the effect of various parameters such as push threshold and traffic update rate on the effectiveness of the various proposed mechanisms such as adaptive push and pull. The results show that our algorithms do perform well for various operating environments.

Author: Hung Hon Tak, Dick

Source: City University of Hong Kong

previous bank exam questions with solutions(Union Bank of India Probationary officer 2008)

2011-05-31T18:53:00.000-07:00

to download the file click on the below link:
http://www.megaupload.com/?d=461NUQH6