T3CH F1RM

5 Ways to Check If You Are Hacked

2011-08-25T13:18:00.000-04:00

In this post I am going to tell You 5 ways in which you can check if you are hacked.
Just follow along and check all the steps, you might also be one of the victims.
NOTE:- Before doing these steps, close all the downloads and web pages. Make sure on torrent of window update install is going on but stay connected to internet.
1) The first method is very simple for all the people using an ADSL router. After all the internet downloads are closed, just check the status of Ethernet light. It should not blink at a very fast rate. It shows that packets are being transferred in and out of your computer.
But as there is no active download or internet activity so no packets should transfer. If so… you might be hacked
2) goto run and type cmd. The command prompt will open. In the command prompt type
netstat -a
This shows the list of active internet connections, check if any unnecessary internet connection is ESTABLISHED. If so, you might be hacked

if you type just netstat, you will get the list of all the netstat commands, you may try the other commands as well.
3) You notice any abnormal activity in your computer, like your computer hangs for a couple of seconds every time you switch it on or in between your tasks (if it occurs often), there is a chance that you are hacked. Often keyloggers and trojans are configured to deliver all the log information to the destination ip address/ ftp address after reqular interval of time. And when this information is being sent, the browser hangs for some time.
4) Use softwares like TCP view, it gives the list of all the connections made through TCP. This software is capable of detecting almost all the trojan/malicious connections.
5) Keep the antivirus updated and install an external firewall like comodo. If your antivirus is not updated regularly, it is as good as nothing. If you don’t update your antivirus reqularly and often exchange data from other computers and download a lot of files. There is a great possibility that you are hacked.
Beware!! Stay updated, stay Protected.
I am sure this was something new for most of you out here..;-)

Watch Free Live Streaming of Apna Channel

2011-08-25T12:57:00.002-04:00

Please wait 3 minutes for the channel to load.

Watch Free Live Streaming of Sab TV

2011-08-25T12:47:00.000-04:00

When channel stops just refresh the page.

Watch Free Live Streaming of Star Plus

2011-08-25T12:41:00.001-04:00

Watch Free Live Streaming of Star One

2011-08-25T12:33:00.000-04:00

2011-08-04T10:01:00.000-04:00

Quran TV Channel

Watch Free Live Streaming Of Islam TV

2011-08-04T09:57:00.002-04:00

Islam TV

Watch Free Live Streaming Of Peace TV

2011-08-04T09:49:00.000-04:00

Peace TV

Watch Free Live Streaming Of QuranTV

2011-08-04T09:46:00.000-04:00

QTV Live

Watch Free Live Streaming Of Dawn News

2011-08-04T08:17:00.000-04:00

Dawn News TV

Listen Free Live Streaming Of BBC Urdu Radio

2011-08-04T08:11:00.000-04:00

BBC Radio

Watch Free Live Streaming Of CNN World News

2011-08-04T08:05:00.002-04:00

Watch Free Live Streaming Of Waqt News

2011-08-04T07:54:00.000-04:00

Watch Free Live Streaming Of PTV World News

2011-08-04T07:49:00.002-04:00

PTV World News

Watch Free Live Streaming Of Samaa TV

2011-08-04T07:46:00.000-04:00

How To Create an auto PC Locker

2011-07-08T12:36:00.001-04:00

Whenever you are working on your PC on some important project and have to leave somewhere urgently, I am sure you don’t go before locking your PC , Do you?

Though it sucked when everytime I (http://techfirm.tk) had to log off everytime to lock my PC. Its a very slow process and I hate my machine working slow. And as we all know that necessity is the mother of invention , I came up with a pretty cool solution of this problem and just loved the outcome:D

Here in this post I’l tell you how to create your own auto PC Locker and lock your PC just by a Double Click.

NOTE:- You must require a possword on Start up for this (no matter admin or user)

Well The method is pretty simple

Open Notepad copy and paste the script below and save it .VBS extention
This wil create a shortcut (on desktop).. run(click) it

set WshShell = WScript.CreateObject(“WScript.Shell”)
set oShellLink = WshShell.CreateShortcut(wshShell.SpecialFolders(“Desktop”) & “\LockWorkstation.lnk”)
oShellLink.TargetPath = “%windir%\system32\rundll32.exe”
oShellLink.Arguments = “user32.dll,LockWorkStation”
oShellLink.Save
And you are done.:)

Hope you liked it..

Keep reading and keep learning. Do pass on comments.

and do Follow to T3CHF1RM.

How to Hack Software and run Trial Program Forever

2011-07-08T12:36:00.000-04:00

We can run any trial software for ever.

Strange!!!

just read on..

Most of us are familiar with many softwares that run only for a specified period of time in the trial mode. Once the trial period is expired these softwares stop functioning and demand for a purchase. But there is a way to run the softwares and make them function beyond the trial period. Isn’t this interesting?

Before I tell you how to hack the software and make it run in the trial mode forever, we have to understand the functioning of these softwares. I’ll try to explain this in brief.

When these softwares are installed for the first time, they make an entry into the Windows Registry with the details such as Installed Date and Time, installed path etc. After installation every time you run the software, it compares the current system date and time with the installed date and time. So, with this it can make out whether the trial period is expired or not.

So with this being the case, just manually changing the system date to an earlier date will not solve the problem. For this purpose there is a small Tool known as RunAsDate.

RunAsDate is a small utility that allows you to run a program in the date and time that you specify. This utility doesn’t change the current system date, but it only injects the date/time that you specify into the desired application.

RunAsDate intercepts the kernel API calls that returns the current date and time (GetSystemTime, GetLocalTime, GetSystemTimeAsFileTime), and replaces the current date/time with the date/time that you specify. It works with Windows 2000, XP, 2003 and Vista.

NOTE: FOLLOW THESE TIPS CAREFULLY

You have to follow these tips carefully to successfully hack a software and make it run in it’s trial mode forever.

1. Note down the date and time, when you install the software for the first time.

2. Once the trial period expires, you must always run the software using RunAsDate.

3. After the trial period is expired, do not run the software(program) directly. If you run the software directly even once, this hack may no longer work.

4. It is better and safe to inject the date of the last day in the trial period.

For example, if the trial period expires on jan 30 2009, always inject the date as jan 29 2009 in the RunAsDate. I hope this helps! Please express your experience and opinions through comments.

How To Run Adobe Reader As Fast As Notepad

2011-07-08T12:35:00.000-04:00

Well e-books have become an integral part of our daily life and most of them are in .pdf format.

.pdf files are opened and read using Adobe Reader. It is a very good software except the fact that it is extremely slow. I ( http://techfirm.tk) was looking for a solution for the problem ie.. to make Adobe Reader Faster and came up with a pretty simple solution.

This trick will make Adobe Reader as fast as Notepad.

Note:- I tried this trick on Adobe reader 9.0 ( but it works with older versions as well)

1) Go to the installation folder of acrobat reader
(C:\\program files\\adobe\\reader9.0\\reader\\.. whatever)

2) Move all the files and folders from the “plug_ins” directory to the “Optional” directory. (I repeat.. cut and paste the files NOT copy & paste). Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

The Reader may configure itself once again for the first time you open it. It will just restore the most important files back to “plug_ins” folder.

Now your acrobat reader will load very fast
and almost as good as notepad

How To Add Contents To Right Click Pop-Up

2011-07-08T12:34:00.001-04:00

Hey friends, as we all know that windows XP is one of the most popular and most widely used windows of Microsoft Corp. till date. And as we know that more usage leads to more exploitation and hence more hacks.

From now I would be posting a series of windows XP hacks or you can say unexplored Windows XP tricks.

I am sure you are gonna love them. They are very rare and unique tricks.

XP Hacks Series Trick 1:-

Adding Content to Right Click
Once done, you will be able to right click any file or folder and use the Browse for Folder dialog to choose the location you want to move or copy your file or folder to, without having to go to the destination path.

First we will add the copy and move options to the right click menu of all FILES.

CLICK Start>Run, type REGEDIT and click OK to open up the registry editor and make your way to this key:
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers
Right click the ContextMenuHandlers key and choose New>Key.
Name the new key “Copy To” (without the quotes).
Repeat the above and create another new key named Move To.

You should now have two new subkeys under the ContextMenuHandlers key:
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers\Copy To
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers\Move To
Select the Copy To key and in the right hand pane, double click “Default”

Enter this clsid value as the value data:
{C2FBB630-2971-11d1-A18C-00C04FD75D13}
Next , select the Move To key and in the right hand pane set the default value to:
{C2FBB631-2971-11d1-A18C-00C04FD75D13}

This now takes care of the Copy and Move options for the right click context menu of all your files.
Now all that is left is to add the same options to the right click menu of all your folders.

The procedure will be the same as for files but at a different key:
HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHan dlers
Right click ContextMenuHandlers and create a new key named Copy To.
Right click it again and create another new key named Move To.
left click on the right hand pane, add the same default values as you did for Files:

For Copy To:
{C2FBB630-2971-11d1-A18C-00C04FD75D13}
For the Move To:
{C2FBB631-2971-11d1-A18C-00C04FD75D13}
Exit the registry and you are done.

Now when you right click on a file or folder, you should see two new options: Copy to Folder and Move to Folder.

I hope you liked it. Do pass on comments.

Keep Reading and do Follow to T3CH F1RM only at http://techfirm.tk

How To Change Log on Screen background in Windows 7

2011-07-08T12:33:00.000-04:00

How would you like to change the logon screen background in Windows 7 so as to give your Windows a customized look and feel? With a small tweak it is possible to customize the Windows 7 logon screen and set your own picture/wallpaper as the background. Changing logon screen background in Windows 7 is as simple as changing your desktop wallpaper. Well here is a step by step instruction to customize the logon screen background.

1. The image you need to set as the background should be a .jpg file and it’s size should not exceed 245KB.

2. The image resolution can be anything of your choice. However I prefer 1440 x 900 or1024 x 768. You can use any of the photo editing software such as Photoshop to compress and set the resolution for your image. Once you’re done, save this image asbackgroundDefault.jpg.

3. You will need to copy this image to

C:\Windows\system32\oobe\info\backgrounds

You will need to create that path if it does not already exist on your computer.

4. Now open the Registry Editor (Start -> Run -> Type regedit) and navigate to the following key

HKLM\Software\Microsoft\Windows\CurrentVersion\Authentication\
LogonUI\Background

If Background does not exist rightclick LogonUI, select New and then Key, and then name it Background. Now locate OEMBackground (listed on the right side). If it does not exist, right-click Background and select New and then DWORD and name it OEMBackground.

5. Double-click on OEMBackground and set the Value Data to 1.

6. Now log-off to see the new logon screen background. If you would like to revert back to the default background, just set the Value Data back to 0.

I hope you like this trick. Just try out and give your feedback!

Do Follow Us (http://techfirm.tk/)

Watch Free Live Streaming Of ARY News

2011-07-08T11:13:00.000-04:00

Watch Free Live Streaming Of Sony TV

2011-07-08T11:04:00.000-04:00

Watch Free Live Streaming Of GEO News

2011-07-08T10:52:00.000-04:00

PTC (PAID TO CLICK) - PTR (PAID TO READ) WEBSITES - GPT (GET PAID TO) WEBSITES - EARN MONEY ONLINE

2011-07-07T05:48:00.000-04:00

PTC (Paid To Click) Websites:

PTC websites pay you to click on links to ads/webpages. PTC websites have paid links on their site and are not sent via email. Generally you will have more opportunities available each day with PTC websites. They don't offer a lot, but as with PTR websites, they are a great source of secondary income for your portfolio.

PTR (Paid To Read) Websites:

PTR websites pay you to view ads that are sent to you via email. They payouts are not substantial, but the ease and simplicity can't be beat. They are not a primary income earner, but an essential secondary income source for your earnings portfolio.

GPT (Get Paid To) Websites:

GPT sites are an easy way to make money online for free. With a GPT site you make money for completing free offers. There is no catch. Simply follow the TOS, complete offers, and get paid each month. GPT stands for Get Paid To.

SITES TO WORK ON & EARN MONEY ONLINE:

Here are some of the BEST PAYING PTC/PTR/GPT Websites:-

International Scores

2011-07-03T10:59:00.000-04:00

International Scores: "Get the latest scores of all the international cricket matches from Cricinfo. Add the Cricinfo International Scores widget now!"