tag:blogger.com,1999:blog-45325224248865510882024-03-13T07:01:38.353-07:00Computer Repair SupportReal experience of computer repair and supportMuhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.comBlogger688125tag:blogger.com,1999:blog-4532522424886551088.post-79695360288920832632017-09-01T19:54:00.000-07:002017-09-01T19:54:06.668-07:00IP2770 Printer Won't Turn On, Easy Steps to FixCanon printer IP2770 that won't turn ON usually caused by the adapter or power supply of it that has been broken as we had yesterday. I will tell you about this.
A printer with type IP2770, i try to plug the power source and press the power button, again and again, but nothing happen. the printer still off, its indicator no light up.
And then we unplug the power source cable and finding the Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com1tag:blogger.com,1999:blog-4532522424886551088.post-43454593975056197722017-08-27T18:07:00.002-07:002017-08-27T18:07:37.011-07:00How to fix error acer 8930G LaptopAcer 8930G laptop won't load a good working hard drive at first would turn off before loading up windows, and then just sticks. Could it be a bad capacitor? and could this affect the inverter, as i bought a new inverter it lasted 5 mins while i was investigating the other problem, all other hardware works, tested graphics card etc.
Answer for this question : Usually, these problems caused by the Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-25456839879088265862017-07-24T23:01:00.001-07:002017-08-27T17:53:26.847-07:00Easy Tips To Fix Asus Laptop DeadWhen your Asus laptop dead and won't turned ON you follow this steps :
1. Ensure that the carer working well, or the battery not empty. You can use the multitester to do this, check the output of the charger and ensure that you see 19V there.
2. If you sure that the charger is well, unplug the battery and leave the laptop without the battery for about 10 minutes. And after that, plug theMuhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-66855865475819646752017-07-24T21:43:00.001-07:002017-07-24T21:43:12.686-07:00How to keep laptop battery more durableTo keep the laptop battery more durable you can try to follow the tips below :
1. Keep charge until 100%
2. Unplug the charger immediately after the battery level 100%
3. Don't leave the battery not use for along time with empty
4. Don't use the laptop without battery
The tips above will make your laptop battery more durableMuhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-81522959813608273832017-03-17T07:25:00.000-07:002017-03-17T07:25:07.115-07:00How to fix Lenovo L412 Black SreenTo repair the Lenovo L412 laptop that black screen and not booting we need a heater blower or the hair dryer or some other similar tool that can resulting the hot air. Black screen of this condition is that the laptop working when the power button pressed indicated by the processor fan that working and the power indicator led lit up, but the screen of the laptop show nothing.
How to fix this Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-40452983718289659752017-03-17T06:57:00.003-07:002017-03-17T06:57:45.977-07:00Get Into BIOS Lenovo L412This is the steps you can follow about how to get into BIOS setup of the Lenovo L412 thinkpad laptop. Generally that we have knew the steps to get into the BIOS setup of the laptop is by press the F2 key, Delete or F10 key just after the laptop turned ON, but the steps of this laptop is not a like this.
The steps is :
1. Turn off the laptop, press and hold the power button if the laptop error.Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-50479938175467363762017-01-31T01:34:00.000-08:002017-01-31T01:34:29.591-08:00Projector Causing the electric breaker TrippingI have a real experience about a projector that is when the power cable plugged into the electric source will causing the electric breaker tripping suddenly and we cannot reset this without unplugging the power cable of these projector. This is a DLP projector with the brand Infocus.
I have repaired this projector and found a component that broken that causing this problem happen. The steps we Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-43593443205047563232016-11-02T15:35:00.000-07:002016-11-02T15:35:16.533-07:00Why The Laptop JammedWhy the laptop jammed at the initial appearance?, Lets discuss this based on the real experience. Some times ago, i have been repairing the HP laptop with the same problem with this. Finally i found that the problem is at the USB module, the right usb port module. There are a SMD capacitor that is short circuit it's legs, we can test this using the multi tester.
As image above, i have replaed Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-10114818994015691392016-11-01T17:28:00.000-07:002016-11-01T17:28:11.239-07:00Aspire One 756 Netbook Not ChargingOne of the causes of aspire one 756 netbook not charging is charger controller IC that is broken. this ic working with 2 mosfet to make the charging process on this netbook.
The part number of ic charger of this netbook is BQ25A and you an buy this at any electronics shop in your region. By replacing this part so the AO756 netbook will charging normally.Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-89328099044374622842016-10-07T01:54:00.003-07:002016-10-09T16:02:38.295-07:00Blog Terkena Banned Googleblog yang membahas tentang perbaikan komputer, laptop, printer dan perangkat sejenis www.jiwacomp.com sepertinya terkena sandbox oleh google sehingga di search engine google.com tidak lagi muncul. blog ini berisi konten resmi pengalaman perbaikan perangkat komputer yang diambil dari pengalaman real di lapangan di sebuah bengkel perbaikan di daerah ponorogo.
Entah kenapa blog yang sangat Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-57023699988656795952016-09-22T08:17:00.000-07:002016-09-22T08:17:08.158-07:00The Laptop Death Caused By This ICThis is about how to fix the laptop death caused by a small IC. The death laptop caused by various issues and one of this is caused by the broken charger IC. The charger IC is an small controller IC at the motherboard of the laptop that is working as a controller of the charging process of the laptop.
But is this IC get the problem so the laptop will won't turned ON or the laptop is real death. Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com1tag:blogger.com,1999:blog-4532522424886551088.post-89042954021232353532016-09-22T07:54:00.001-07:002016-09-22T07:54:34.095-07:00How to Fix Vertical lines of Laptop ScreenThis is one of ways to fix vertical lines of laptop screen. Here i want to share a real experience that has to do with this issue. In this experience i have been repairing toshiba laptop that show vertical lines on the screen. This laptop working well if we get into save mode, let's see the steps that i have try .
1. Clearing the RAM pins. This step not success, the laptop still not well
2. Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-23905506928358286322016-08-06T08:19:00.001-07:002016-08-06T08:19:20.686-07:00When MP287 Printer Error P07When MP287 printer error P07 you can try to fix this using the steps below that we have tried and success. The tools that needed of this is a laptop or computer and a software that you can download this for free using this link, follow the steps.
1. Make the printer off by pressing the power button until all the lamp indicators off
2. Press and hold the STOP button and Press and hold the power Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-66661365086151715472016-08-06T07:28:00.000-07:002016-08-06T07:28:26.534-07:00When IP2770 Printer Blinking Orange 5 TimesWhat we should to do when your IP2770 printer blinking orange 5 times continuously ? Follow the following steps to fix it.
1. When the printer have been blinking, open the upper case or cover.
2. After the cartridge stopped at the middle side, open the both cartridge holder
3. Take out the cartridge
4. By using the tissue and the little fluid please to clean the cartridge pins until glisten.
5.Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-43411230848138017842016-08-06T07:09:00.003-07:002016-08-06T07:09:48.735-07:00Biggest Canon Printer ProblemsBiggest canon printer problems that is often happen we will show you based of my real experience. Especially for the canon printer that using the infuse tube modification, IP2770, MP287 or other printer include MX... etc., the most common problem are below :
1. It's hose go into a skid
2. The Color cartridge get out of the connector,
3. Ink is not smoothly so colds, so the printing result will Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-16565147687096772182016-07-16T23:34:00.000-07:002016-07-16T23:34:36.471-07:00Repairing R230 Printer Blinking ContinuouslyWhen the Epson R230 blinking this mean that we need to reset it to fix. If blinking, the printer will not responding any action from us and all mechanic will silent.
To reset to fix this we need a software or free program called SSC Service Utility, and for downloading please use this link : R230 free resetter
Extract the file after finished download, and open the sscserve.exe file to install Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-25083355139108169462016-07-06T18:44:00.002-07:002016-07-06T18:44:50.140-07:00Menemukan Komponen Rusak Pada Laptop Not ChargingAda beberapa langkah yang harus dilakukan atau seharusnya dilakukan untuk menemukan komponen yang rusak yang terjadi pada laptop not charging yang manunjukkan adanya kegagalan proses charging atau pengecasan yang tidak sempurna.
Langkah-langkah ini bertujuan agar sumber masalah bisa ditemukan dengan tanpa ada resiko kerusakan pada bagian lain atau setidaknya mengurangi adanya resiko kerusakan Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-92107612428658160492016-06-23T18:33:00.001-07:002016-06-23T18:33:55.915-07:00Sony Ultrabook Wont Turn ONWhat we can to do when our Sony Ultrabook wont turn ON or charge and there is no light when the power is plugged in.
I will try to answer this question. Here is the steps to analyze and fix the problem.
1. Release the battery and after few seconds try to turn ON the laptop using the charger only
2. Try to use the other charger to ensure that the charger is normal
3. Open the case and Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-23112076578292844682016-06-23T18:04:00.000-07:002016-08-06T08:36:35.494-07:00Fujitsu Laptop Has Restart ContinuouslyThis about the fujitsu laptop that is restart continuously and show us the bluescreen before restart beginning, and this is happens continuously. You should know that this problem could happen in any type of the laptop, fujitsu, acer, toshiba etc. And one of the causes of this is the problem at the VCore lane. The VCore equipped by several SMD Capacitors or tantalum capacitor and this is the Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-74773120363020466072016-05-31T18:04:00.000-07:002016-05-31T18:04:54.380-07:00Asus X200M Notebook Black ScreenHere is the Asus X200M notebook that is not immediately ON when the power button pressed and after about a minute the notebook will ON and working well.
Some times this notebook working normally and ON directly when the power button pressed but some times not like this. What the problems with this notebook. This caused by the trouble of the keyboard unit and we can repair this without replacementMuhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-52397473037612485202016-04-14T18:23:00.001-07:002016-04-14T18:23:43.196-07:00Repair Home Button IphoneHow to repair the home button of iphone ?, Here is the steps to do this using the makeshift tools. The iphone that we have been repairing here is iphone 3gs.
1. Turn off the iphone
2. Release the bolt of the case
3. Place the tool as the image below and pull carefully to open the upper case of the iphone. Unplug the flexible cable connector there.
4. So you will see the home button from the Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-26995479811383920942016-04-13T21:07:00.000-07:002016-04-13T21:07:03.183-07:00Repair Sony Projector BlurTo repair the sony LCD projector that is the image of the screen has blur after few minutes please to follow the following steps. This mean after the projector working and the temperature have risen the image will blur.
The steps to fic this problem is below :
1. Turn off the projector by pressing the power button ( according the type of the projector )
2. Release the power jack cable from the Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-86582611576587935642016-03-30T17:58:00.002-07:002016-03-30T17:58:49.406-07:00This Will Cause The Laptop Won't Turn ONAn electronic component on the laptop motherboard will cause the laptop won't turn ON and not responding when the power button pressed.
This is SMD Ceramic Capacitor, as the image above. This condition often happen on the laptop that is won't turn ON, caused by the broken ceramic capacitor. A laptop equipped by the hundreds SMD ceramic capacitor and when one of this has broken so the laptop Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-87482460646130328462016-03-29T17:37:00.003-07:002016-03-29T17:37:59.787-07:00Digital Camera Won't Turn ONThe first action we should to do when the digital camera won't turn ON is below :
1. Release the battery
2. Clean the battery connectors using the - screwdriver or a pinset
3. If the step 2 not working, try to charging the battery using the external charger or portable charger ( not the camera charger ).
4. If still not working, this mean that the problem is at the mainboard and you need to Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com0tag:blogger.com,1999:blog-4532522424886551088.post-14711349776845020762016-03-29T17:28:00.001-07:002016-03-29T17:28:32.057-07:00BenQ Projector Won't Turn OFFThis is the trivial problem, the BenQ dlp projector won't turn off but this will make us confused. Usually, to turn off the projector we just need to press the power button twice, but if this actions not successful and the projector still working after this so you must reset all the option to the factory reset.
To reset the projector find on the Menu option.Muhammadhttp://www.blogger.com/profile/02668695109413845278noreply@blogger.com1