My Tricks & Tips

What is WEP Encryption and its Security

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:23:00 +0000

What is WEP Encryption and its Security

WEP encryption (Wired Equivalent Privacy, or Wired Equivalent Privacy) is a cipher, implemented in the 802.11 wireless connection protocol, which encrypts the information we will pass between two points so that it can only be access to them and interpret them the points that have the same key.

In general, a wireless router or Access Point will only allow access to those terminals that have the same WEP encryption key.

This key can be of three types:

64-bit WEP key .-, 5 characters or 10 hexadecimal digits (0 to 9””””A to F preceded by the string”0x”).

128-bit WEP key .-, 13 characters or 26 hexadecimal digits (0 to 9””””A to F preceded by the string”0x”).

256-bit WEP key .-, 29 characters or 58 hexadecimal digits (0 to 9””””A to F preceded by the string”0x”).

The one most often used is 128 bit, offering a good level of protection without being overly long and complicated.
The 256-bit WEP encryption is not supported by many devices.

A WEP key can decipher (there are programs for it), but this requires an uninterrupted traffic data for a given time (in fact, enough data and enough time).

Obviously, the higher the level of encryption and key more complicated the more difficult it will be to decipher.

It does not take the same (given data volume and time) to crack the WEP encryption key of 64 bits of 128 bits, and there are also no relationship between arithmetic, ie it does not take twice as crack a WEP key of 128 bits a 64-bit.

Although it is possible to crack these encryption keys, do not think that is easy or quick. A good key 128-bit WEP encryption (if not a 256-bit) can be almost unreadable if we have ensured that is sufficiently complicated.

Most key-cracking programs are based on a series of more or less logical sequence with which it begins to attack our system to enter. Obviously, a key rate takes seconds 1234567890 be located, but no one thinks (or should it occur) to this key.

We should avoid keys that contain sequences related to us (dates, names, places), and phrases, as it is the first thing you try this type of program. This is not only valid for a WEP key, but for any kind of key you say. We should also avoid key easy as consecutive sequences of keys or numbers.

For safety it is strongly recommended wherever possible to enable MAC address filtering. An also read my post on Wifi Security

A MAC (Media Access Control address) is a hexadecimal identifier of 48 bits. This address is unique for each device, not being a user-modifiable parameter (each card or network interface has its own MAC address, set by the manufacturer.)

Firesheep:Trick to Hack Facebook and Twitter Password on Wifi

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:21:00 +0000

Firesheep:Trick to Hack Facebook and Twitter Password on Wifi

Do you access your Facebook or Twitter account while you are on a public network like your college’s or office’s unsecured wifi.Then this is the time that you should think about your account security.If you think that facebook or Twitter are secured websites then it’s the time to face the reality they are not secured.Whenever you login into your facebook or twiiter account check the address bar of your browser you will see something like http://www.facebook.com/home.php? Similar is the case with twitter.They use http protocol instead of secured https protocol.But if you login into your gmail account you will notice that it uses https protocol.

So, the trick I am telling you works only on websites like facebook,twiiter,flickr but not on secured websites like Gmail.So here is Trick to Hack Facebook and Twitter Password on Wifi and also the method of protection from this hack.This trick doesnot require any programming knowlege and everyone can use this trick easily.

1.Download firesheep Firefox extension.This is a freeware extension for firefox browser.

2. Once installed it will open a sidebar window into your firefox browser.

3.Now it will show all the people who are connected to unsecured wifi network.Once they login into your facebook or twitter account you will get a notification and with a single click you can login into their account.

This whole thing work on the technique of cookie hijacking.Once your session cookie is hacked then anybody can login into your account.These cookies can be easily caputered on unsecured wifi network.

The best way to protect yourself from such a hacking trick is to avoid using your facebook or twitter accounts on unsecured wifi networks as it is a security lapse from the websites not on your side.

Note:-This article is to inform you about how your password can be hacked and how to prevent it.This article is purely for educational purposes.

Trick for Advanced SQL Injection : Havij

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:20:00 +0000

Trick for Advanced SQL Injection : Havij

I got a tremendous response for my earlier post on SQL injection.A lot of people request for advanced SQL injection tutorial.Before I give you a complete layout of how to do Advanced Sql injection on vulnerable website I recommend you to go through the earlier post so get a slight idea about What Sql injection Is And How It Works.

Well to make the Sql injection easier for you I would be using a tool Havij.Its has both a free version and and a paid version.In this tutorial I will be demonstrating how to use the free version of Havij.The success rate for this tool is more then 94% on the vulnerable website.

It is automated tool for SQL injection for penetration testers to check whether a website is vulnerable to SQL injection or not.All you need to do is to enter the URL of the site that you want to test for the vulnerability and click on ANALYZE button.It will automatically scan the website for Sql Injection.

Below Is the Download link For Havij

CLICK HERE TO DOWNLOAD HAVIJ

Here Are the Features of Havij

Supported Databases with injection methods:
a. MsSQL 2000/2005 with error
b. MsSQL 2000/2005 no error (union based)
c. MySQL (union based)
d. MySQL Blind
e. MySQL error based
f. Oracle (union based)
g. MsAccess (union based)

Automatic database detection

Automatic type detection (string or integer)

Automatic keyword detection (finding difference between the positive and negative response)

Trying different injection syntaxes

Proxy support

Real time result

Options for replacing space by /**/,+,… against IDS or filters

Avoid using strings (magic_quotes similar filters bypass)

Bypassing illegal union

Full customizable http headers (like referer and user agent)

Load cookie from site for authentication

Guessing tables and columns in mysql<5 (also in blind) and MsAccess

Fast getting tables and columns for mysql

Multi thread Admin page finder

Multi thread Online MD5 cracker

Getting DBMS Informations

Getting tables, columns and data

Command executation (mssql only)

Reading system files (mysql only)

Insert/update/delete data

What Havij can do for you ?

By using this software user can perform back-end database fingerprint, retrieve DBMS users and password hashes, dump tables and columns, fetching data from the database, running SQL statements and even accessing the underlying file system and executing commands on the operating system.

How to Find A vulnerable website

Go to google homepage and search for inurl:php?id=

You will get probably thousands of result.Now open any page and add a apostrophe ( ‘)to the end of the url.Example if the Url was http://www.mytargetsite.com/php?id=34it should be now http://www.mytargetsite.com/php?id=34’

If you get a SQL syntax error then this website can be vulnerable to SQL injection.Now you should use Havij on this URL.

NOTE:This tutorial is for only educational and testing purposes.In some countries SQL injection is an offence.

Trick on How To Download Songs From Raag.fm

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:19:00 +0000

Trick on How To Download Songs From Raag.fm

Raag.fm is one of the most popular online songs streaming website.It has some very rare songs and latest arrivals especially Punjabi songs that are sometimes not available on other websites.So, In this post I will tell you the trick on How you can Download Songs from raag.fm

This trick is not limited only for raag.fm but it can be used for most of the online streaming websites.Before I give you the whole trick let me explain the basic concept of how online streaming works so that you can know where this trick will work and on which websites it wont work.

How Online Streaming of Songs Work?

The songs that are streamed are stored on the server of the websites.Whenever you play a song usually a Flash/javascript player opens so that you cannot get the direct links of the song on the server.But you may have noticed that if you play the complete songs once it will can be played again (if you haven’t closed the music player) even if you disconnect your Internet connection.This is because the song is already stored in the cache of the web Browser.

Trick to Locate The Cache Folder

If you are able to locate the cache of the song which has been already played in the music player then it means that you have downloaded the song.It is quite easy to locate the cache folder in google chrome so I recommend you that you you should use google chrome for this trick.

Make Sure that you have enabled to View hidden Files and Folders.

The cache folder for Google Chrome in Windows 7 can be located at

C:\Users\USER_NAME\AppData\Local\Google\Chrome\UserData\Default\Cache

C, being the system root. If you are not sure about the system root you can replace C: with %systemroot%.

Also donot forget to replace USER_NAME to your windows username

The cache folder for Google Chrome in Windows Xp can be located at

C:\Documents and Settings\USER_NAME\Local Settings\Application Data\Google\Chrome

Once you go to the cache folder you will probably see hundreds of files.

Trick to Find Song In cache folder

As you will probably see hundreds of files with random names and no extensions it can be quite difficult to locate the song.But you will see that most of the files will have very small size like less then 500 kb.So sort the files according to their size.

As songs have usually size of 3 mb to 8 mb you can easily recognize you song.Play the file with Vlc player.If this is song you were looking for then copy it and paste it at your desired location by renaming the song with the extension of .MP3 (Make sure you haveunchecked hide files files extension in folder options in control Panel)

Websites On which this Trick Will not Work

There are some famous websites like in.com and probably others which do not save any cache file on your browser.So this trick will not work on these type of website.To test whether this trick will work or not the website simply play the complete song replay it and disconnect the Internet in between if the songs plays continuously the this trick will work else Find Another Website

Note:-Cache of the song will be stored on when you have played the complete song.So,Do Not panic if the cache doesn’t appear.Wait for the song to be completed.

Trick on How to Convert Firefox into keylogger

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:18:00 +0000

Trick on How to Convert Firefox into keylogger

Do you want create your own working undectable keylogger and without any programming knowledge.The keylogger can store all the usernames and passwords of mozilla firefox without the user’s consent.

How this Keylogger Works?

Whenever you login into any website using mozilla firefox browser it always ask’s you whether you want to Save password or not for that website.

We will be using a script that will not give the user option to save the password instead it will automatically save the passwords without user’s consent and we will retrieve them later.

Can this be detected by antivirus?

I have scanned it with Mcafee,Norton and Avast and it is totally undetectable.

Does It work on all websites?

It is working on almost all websites like facebook,hotmail,reddit and digg.But this trick somehow failed on Gmail.

Now I will give you the step by step tutorial on how to use this trick

Download this script here

Now go to the following address

If you are Windows user then goto

C:/Program Files/Mozilla Firefox/Components

If you are MAC user then goto

Applications > Right click Firefox > Show Package Contents >Contents/MacOS/Components

Now find a file nsLoginManagerPrompter.js and copy it to somewhere safe location because we will be replacing this file in next step.
Extract the script folder that you have downloaded in first step and copy and paste the nsLoginManagerPrompter.js from the folder to the folder mentioned in step 2.
So now your firefox keylogger is ready.Now Each and every username and password will be automatically saved.

The next step is to retrieve the username and passwords that have been stored in your firefox browser.

It is very easy to retrieve the password from firefox using firepasswordviewer.You can read the complete tutorial here.

How to Secure your Gmail Account from Hackers

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:17:00 +0000

How to Secure your Gmail Account from Hackers

All of us have our Email Accounts on Gmail, Yahoo, Hotmailetc.Phising and hacking are on the rise and many of us have already faced the situtaions when our email Id has been compromised.It is very difficult to estimate the loss which one undergoes once his email ID has been hacked.

Now you can add an extra layer of security in your Gmail Account.After enabling this feature you have to enter an addtional verification code (sent to your mobile) to login into your account.So,if somebody hacked your password even then he won’t be able to access your email account.

How to Secure Gmail Account:-

Login to your Gmail Account.
Now open this link https://www.google.com/accounts/SmsAuthConfig.
Click on the Start Setup button.

Choose a verification method.By selecting Text message (SMS) or voice call you will recieve the verification code on you phone either as text message or as a call.

Enter the appropriate information about your country and Mobile Number.

Choose SMS text message or Voice call option according to your need. (I prefer SMS text message).
After giving your mobile number test your phone by clicking on the Send Codebutton.

Now you will receive a verification code on your given mobile number and type that code in the verification field and click on Verify button.
After verifying your number click on the Next button.

If you lost your mobile or your number is not available when you need it. For this you can save backup codes in to your computer.

Click on Next button again.
Here you will see 10 Backup verification codes. Choose Print codes or Save to text file option whatever you like but keep it safe and don’t lose it.
Check mark the box and click on Next button.

Here give your working alternative number. And click on Next button.
Now again click on the Next button again and then click on the Turn on 2-step verification button.

Click OK.

That’s it ! Now you have been added 2-step verification security to your Gmail account. Now whenever you will enter your password it will ask you to enter verification code without it you won’t be able to login to your Gmail Account.

Best Keylogger Software:Max Keylogger

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:16:00 +0000

Best Keylogger Software:Max Keylogger

For the past few weeks I have been busy testing keylogger softwares.There are a lot of keyloggers available on internet and selecting a best is indeed a difficult task.If you are also looking for a keylogger that tracks each key stroke,send reports to emails,take screenshots ,Is Undectable andCopy text from Clipboard then Max Keylogger is best for you.

Are Keyloggers Legal To Use?

Keyloggers are usually associated with hacking but this is not the case.It is completely legal to use keyloggers to monitor activity of employees,Children and other people using your computers.

Different People can have Different Purposes For using a Keylogger

To System administrators：
Keylogger could help you clearly know about what have been displayed in the system. protect yourself know everything they do on your computer.

To CEOs：
The computers in your company are under your full control with Max Keylogger. You will be clear about all your employees’ performances or actions anyone using your official computer. Max Keylogger protect your business.

To Parents：
You could follow up all programs your children have run. And find out what they have search on the Internet. Protect your children form online dangers.

To All Users：
Be able to build a full control on your own PC with Max Keylogger. Besides you will be clear about what was run and when, what text was typed, etc. on your PC in your absence. Using the program constantly, you will able to restore the previously typed text in case you have lost it. With the help of Max Keylogger, you also could restore the forgotten password or the lost email.

To Computer Classes and Internet Cafes：
Max Keylogger will let you know what the users have been doing on the computers.

Key features Of Max Keylogger

Stealth:-Max keylogger is completely Undectable from Task manager,Taskbar as well as Add/Remove Menu in control panel.
It can only be opened using a special key combination and cannot be uninstalled without password.

Remote Reporting:-It is one of the best and most useful feature of Max Keylogger.You can specify and Email id and interval time after which reports will be automatically sent on your email id which includes system screenshots.
I have tested it with Gmail ID and it works perfectly fine.

Organization:-You will notice a clean interface with easy to navigate icons.It has all the options along with notifications on home screen.See the screenshot below

Screenshots monitoring:You can specify the time interval as well as quality of images(black and white,coloured etc) for screenshots.It can take screenshots of complete screen or only active screen

Clipboard recording:-People usually copy/paste their passswords to make them undectable from keylogger but Max Keylogger has the ability to caputer the clipboard passwords.

Voice recording (unique feature):-This one of the Unique features of Max Keylogger.It can Record Voice and Video Calls(without video).

Click Here To Download Max Keylogger

How to Reset Windows 7 or Vista Password

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:15:00 +0000

How to Reset Windows 7 or Vista Password

If somehow you have forgotten your windows password and are looking for way around to login back into your computer then you won’t have to worry.There are many methods are available for resetting password of your windows 7 or vista.But many of them are lengthy or sophisticated.This is one of the simplest method and you only need a windows installation CD/USB to reset the password.It relies on an unpatched bug in windows operating system.

Step-By-Step Guide to Reset Windows Password:

Insert windows 7 disk into your CD Rom and Restart your computer.
Press any key to Boot from the CD and then click on Repair your Computer.

Now from the various options select Command Prompt.

Now Command Prompt will be open and create a backup of Sticky keys by typing the following command in the command prompt

copy c:\windows\system32\sethc.exe c:\

Now replace sticky keys with the Command Prompt by typing the following command

copy c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe

Now Restart your computer.
When you get the windows login screen then hit Shift button for 5 times continuously and Administrative Mode of Command Prompt will be open.

Now to reset the password just type the following command

net user geek MyNewPassword

Remember: geek is the username of the computer and MyNewPassword is the password. Replace both as you wish.

Now every time when you press Shift key for 5 times then command prompt will be open instead of Sticky keys. To get back these Sticky keys repeat first three steps and then in the command prompt window type the following command.

copy c:\sethc.exe c:\windows\system32\sethc.exe.

How To Create a Google Plus Fanpage

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 08:12:00 +0000

How To Create a Google Plus Fanpage

Google+ has launched its much awaited pages which will help you get connected with local business,your favourite sports team or anything you are crazy about.This is pretty much copy of Facebook fanpages.If you own a website or a brand you can also create your own page and get connected with Google Plus users.

Google Plus page is similar to Google Plus profile as you can comment using your page name,add people in your circles etc.Creating a page is very easy and requires minimal steps.

How To Create a Google+ Fanpage

Open this link and login into your Google plus account.
A page with tittle Create a Page will open.Select an appropriate category for your page.If you are creating page for your website or blog then select Product or Brand.
Add information like Brand name,Website (optional) and select an appropriate Sub category.

Google+ will ask for a Tagline or 10 words that defines your website or product best.Also Upload a Profile Photo and Click Continue.

And you are done.You have successfully created Google plus page.

Now, you can invite people to follow your page, share it on your Google+ profile or can put a badge on your blog or website.

You can also easily toggle between your actual profile and Page profile from dropdown menu near your profile picture.

You can follow us on Google plus here

How to Set Long Height Profile Picture in Facebook

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 07:30:00 +0000

How to Set Long Height Profile Picture in Facebook

Your Facebook profile picture sets the first impression on whoever visit your profile for first time. Everyone wants to set a Stylish and Attractive DP (Display Picture) on their facebookprofile, fan pages and groups. Here is the very good online tool by which you can set a long height facebook profile picture. With this tool you can also re-size, add special effects and download the picture in your computer.

How to Set Long Height Profile Picture in Facebook:

First of all, go to this website.
Then click on Load Photo button if you want to take a picture from your computer otherwise click on Use Webcam to take a picture.

Now Configure and Edit your photo as you want.
Click on Login to FB button to set this picture as your DP.

Give your Username and Password to login into your facebook account and then click on Allow button in the Permission and Request section.
Now your edited image will be set as profile picture.
If you don’t want this edited image as your profile picture for now then click on theDownload Pic button. This will download the picture in your computer and you can set this image as profile picture manually whenever you want.

Magic Number Trick in Facebook

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 07:28:00 +0000

Magic Number Trick in Facebook

These days magic number trick is becoming a rage on facebook.Anything related to facebook (however small it may be) is sure to create a buzz among people.These magic numbers are nothing but the unique ID numbers of the Users, Pages or Groups. When you will paste these numbers in your satus they automatically will get converted into your profile,group or page link.

You can also send these to your friends and ask them to paste in your status.They will certainly get amazed.

How it Works:

Login to your Facebook account
Go to your profile link or to your friends profile link and there look for the ID numberin the facebook URL.

Copy the ID number and replace it in the following number

@+[ID:0:]

Suppose 199500840125082 is the ID with which you want to replace the code. So your code will be

@+[199500840125082:0:]

Now ask your friends to copy/paste this code in the status or in comment section and remove + sign from it, make it as @[199500840125082:0:]

Then hit Enter and see the Magic.

How to Download Torrent Files with IDM

noreply@blogger.com (Anonymous) — Thu, 17 Nov 2011 07:27:00 +0000

How to Download Torrent Files with IDM

Downloading files from the Torrents site is easy and completely legal (unless you are downloading copyrighted files).Downloading speed from torrents depends upon various factors like seeders, leechers, internet connection etc.If have high speed internet connection but still not getting good downloading speeds then you can use IDM to download them.There are various methods on the internet to do this but this is the easiest, simplest and tested method.

How to Download Torrent Files with IDM:

Open www.torrentz.eu .Search and Download the torrent file (.torrent) of your desired file from there.

Once you have downloaded that torrent file then go to the websitewww.torcache.net
Now upload that torrent file that you have just downloaded and click on the cachebutton.

This will generate a new torrent link of your file just copy that link.

Now go to the www.torrific.com and get register there if you don’t have account otherwise login into your account.
In the text field paste that new torrent file that you have get in the 4^th step and click on get button.

You will see all the torrent files that are present in that torrent . Click on initiate bittorrent transmission button.

Now all the files that are present in that torrent file will be available to download just click on any of the file that you want to download and IDM window will popup.

Now Start Downloading your file.

You should use this method only if you are getting very poor speed with your torrent client because if you download it with IDM the link will not be resumable and you have to finish it without breaking your internet connection.

How to know who spying on you in Windows XP?

noreply@blogger.com (Anonymous) — Thu, 20 Oct 2011 08:16:00 +0000

Hi!
Trick of this day is : How to know which software use your Internet connection, through the windows DOS to make sure there is no malware spying on you or something else.

1 - Click on Start.

2 - Click on Run.

3 - then type this command :

cmd

4 - Click on OK.

5 - In the DOS window type this command:

netstat -abnov

6 - Wait while the computer collect programs and DLLs that using your Internet connection.

7 - Now you can see all the programs that use your Internet connection in windows XP.

Other netstat commands

Netstat -p	Netstat –a
Netstat –s	Netstat –b
Netstat -v	Netstat -e
Netstat –e -s	Netstat -n
Netstat –s –p tcp udp	Netstat -o

enjoy this trick!

How to Turn OFF Firewall by one click in Windows XP

noreply@blogger.com (Anonymous) — Thu, 20 Oct 2011 08:04:00 +0000

You can enable or disable the firewall of windows XP by single command only through the Command Prompt
to avoid several stages of enable or disable the firewall.

Disable the Firewall of Windows XP:

1 - Click on Start

2 - Click on Run

3 - then type this command :

netsh firewall set opmode disable

4 - Then click on OK.

Enable the Firewall of Windows XP:

1 - Click on Start

2 - Click on Run

3 - then type this command :

netsh firewall set opmode enable

Tutorial on How to use HJSplit

noreply@blogger.com (Anonymous) — Sun, 16 Oct 2011 02:13:00 +0000

HJSplit is a program to split a large file into small pieces in a much more rapidly than do the Split Rar. Where this HJSplit jg can be used to restore it as original

How to use HJSplit:

To perform SPLIT (split large files into small files):
1. Double-click the program HJSplit.exe (no need to install)
2. Click Split
3. Click on input files and browse the file you want parsed
4. Click on the output file if you want to put a dividing results in a different folder (not mandatory at the click)
5. Define Split file size
6. Press start
7. after the last complete split close

To perform JOIN (combining the results of the fragmented files HJ Split):
1. Double-click the program HJSplit.exe (no need to install)
2. Click Join
3. Click on input files and browse the files would be merged (just the file extension .001 and the rest will automatically be extracted directly, but make sure all the files .001 to .00 X are on the same folder)
4. Click on the output file if you want to put the joint in a different folder (not mandatory at the click)
5. Press start
6. after a join complete and close

uploader usually just rename the file to be split HJ. rar. For example SAW-6.avi.001.rar, so after you download the file ... just rename it to SAW If 6.avi.001 and ignore any warning will file damage, then join dg HJ Split.

Example file name HJSplit
SAW-6.avi want to break into 3 parts. formed so that the file is
SAW-6.avi.001
SAW-6.avi.002
SAW-6.avi.003
or globally
NamaFile.TipeFile.001
NamaFile.TipeFile.002
NamaFile.TipeFile.003

so if you want to join, rename its name as an example.
Nothing further.

Tutorial How to Install Windows Using Usb (Flash Drive)

noreply@blogger.com (Anonymous) — Sun, 16 Oct 2011 02:12:00 +0000

Those who want to install Windows XP on a computer that no CD drive, there are alternative ways ya! This way I Get of www.eeeguides.com. What are the requirements? Here it is: USB Flash Disk (Minimum 1 GB)

Bootsect.rar (227 kb).
PeToUSB_3.0.0.7.rar (98 kb).
USB_Prep8.rar (136 kb).
WinRar (1256 kb).

Windows XP CD (Better Use SP 2).
Existing computer CD drive and use Windows XP or Vista OS.
Courage, and patience. This process is quite time-consuming
After downloading all the above requirements, the following steps:
1. Extracts Bootsect.rar, USB_Prep8.rar and PeToUSB_3.0.0.7.rar.
2. Copy-Paste to a folder PeToUSB.exe USB_Prep8.
3. Usb_prep8.cmd doble click in the folder USB_Prep8, it later emerged the command prompt :

4. Click any button, the window will appear like this:

5. Click start. IMPORTANT: After formatting is complete, do not close the window! do was huddled. ^ ^
6. Open a command prompt (Start-> All Programs-> accecories-> Command Prompt or Start-> Run ... -> type cmd in the box).
7. Navigate to the directory where the command prompt in the extracts was bootsect.exe use the command:
"Cd Directory_tplace_bootsect.exe"
example: "cd desktop \ new folder"
8. Type "bootsect.exe / nt52 I:". I is a USB drive (altered state drive on the computer).
If successful then exit the phrase "Bootcode was successfully updated on all targeted volumes."
9. Close the command prompt that is (not that usbprep8). Close the window also PeToUSB, then will appear the following window:

10. Do not press enter once here (very fun ^ ^)
Press 1 then enter. Window will appear, browse to the drive where XP cd.
Press 2 then enter. Enter unused letters for names in the computer drive (usually c, d, e, f is already in use)
Press 3 then Enter. Insert the USB drive letter.
Press 4 then Enter. The process of copying data to USB drives will begin.
11. There will be questions about formatting the drive T. Type y and then enter.
12. After formatting is complete, press enter to continue.
13. Press enter again to continue.
14. Pop-up box will appear, click yes.
15. Click yes again in the pop up window that appears.
16. Click yes again to unmount the virtual drive.
Okay! Process is complete. USB can be used to install Windows XP.
Do not forget to setup the boot manager in the BIOS to boot from USB.
Continue to fit the installation, select the number 2 for text mode setup first. Process will be continued as usual XP installation.
When finished select option number 1 to continue installation of Windows XP.
Do not unplug the usb until installation is complete. After Windows is finished installed, disconnect the USB (Safely removed first).

Good Luck,And Dont Forget For Comment For this Blog.thx

Windows 7 Keyboard shorcut

noreply@blogger.com (Anonymous) — Sun, 16 Oct 2011 01:59:00 +0000

Windows 7 introduces several new keyboard shortcuts that come in handy when managing open windows in the operating system. Most Windows 7 keyboard shortcuts mimic the behavior when dragging and dropping windows in the new operating system. Here is the list in case you like to use the keyboard instead of the mouse.

[Windows Up] - Maximize window
[Windows Down] - Minimize windows / Restore
[Windows Left] - Dock window to the left side
[Windows Right] - Dock window to the right side
[Windows Shift Up] - Maximize vertical size of window
[Windows Shift Down] - Restore vertical size
[Windows Shift Left] - Move window to left monitor
[Windows Shift Right] - Move window to right monitor

How to prevent the "Autorun" of the Drivers

noreply@blogger.com (Anonymous) — Sun, 16 Oct 2011 01:58:00 +0000

Tip of this day is How to prevent the Autorun of the disk drive ( CD-ROM / DVD-ROM…) .
And that, as usual, will be through the Registry Editor.

1 - Click on Start

2 - Click on Run

3 - then type this command :

regedit

4 - Then click on OK.

5 - Then Follow the path :

HKEY_CURRENT_USER –> Software –> Microsoft –> Windows–> CurrentVersion –> Policies –> Explorer

6 - Click on Explorer .

7 - In the right side of the window right click.
New –> DWORD Value.

8 - Give it this name:
NoDriveTypeAutoRun

9 - Replace 0 with 1

10 - Click on OK.

Done!.

How To Speeding Up the Dual-Boot Timeout

noreply@blogger.com (Anonymous) — Sun, 16 Oct 2011 01:57:00 +0000

If you dual-boot your computer with Windows XP and another operating system, you see an operating system selection menu on startup. If you typically boot into Windows XP and not the other operating system, you can speed up the dual-boot timeout value so that you do not wait so long for the boot process to select your default operating system and continue with the boot process. The default timeout value is 30 seconds but you can change this setting to 10. This gives you enough time to select the alternate operating system if you want but also speeds up the boot process.

Follow these steps:
1. Locate the boot.ini file on your computer. It is a hidden file by default;
It is usually located in C:\boot.ini.
2. Open the file with Notepad (which is what opens it by default).
3. Change the Timeout value to 10.
4. Select File/Save and close Notepad.

5. good luck

How to timing your computer to close automatically!!

noreply@blogger.com (Anonymous) — Sat, 15 Oct 2011 00:18:00 +0000

How to shutdown the device in advance and without any specific program:
And does not have any complexity and is very useful for example, suppose You were doing a download from the Internet This download takes an hour and you hurry and want to go somewhere ... Or you want to sleep and you want after the completion of the Download to a computer Turning off itself after certain period
Or you have kids and want to fix them time to sit down On the Internet or the computer .

You just need to do the following:

1 - Click on Start

2 - Click on Run

3 - then type the following:

shutdown -s -t 3600

Taking into account the space between the letters (copy it as they are)
Also taking into account the number 3600 (a one hour)

This time limit after which extinguish system, and can increase the duration
By hit value ((3600)) in the number of hours you want
For example, you want after three hours
So .. 3600 × 3 = 10800
Means you type the command in the Run as well as:

shutdown -s -t 10800

Important: After you type the previous command
Will show you a box to tell you how much time remaining
To turn off your computer ((hour and minute and second))

How to cancel the shutdown command:

Suppose that you have returned quickly
From the place which left him before Turning off the system
And you want to cancel that you were drawn in advance and want to continue in your work.
On the system follow the following:

1 -Click on Start
2 - Click on Run
3 - Type the following command:

shutdown -a

Operation was canceled the shutdown of the system.

I hope you enjoyed & Thank you for your attention.

Shutdown Shortcut just one click turn OFF computer!

noreply@blogger.com (Anonymous) — Sat, 15 Oct 2011 00:17:00 +0000

If you want a quick way to shutdown your computer without having to go through all the steps Start-Turn Off Computer-Turn Off...

The Windows XP comes with a special executable file for shutting down that allows you to make a shortcut for shutting down by just one Click .

Steps :

Right click on any blank space of windows desktop then 1 -

New -> Shortcut

(Create Shortcut) window will open.

2 - then type the following in the blank :

shutdown -s -t 0

3 - Click on Next

4 - Reach to the last step to create a shortcut is to write the name you want for thisshortcut ((Type A Name For This Shortcut)) .. Type the name you want that have ameaning like shutdown.

5 - Click Finish to end.

New you have a shortcut to shutdown your device by one click!

Let's make an icon Inappropriate!

6 - Right click on the Shutdown shortcut icon, then click:
Properties -> Change icon…

It will popup an alert, ignore it by clicking OK .

7 - choose any icon like the picture:

8 - Click on OK.

& well done!.

Active the "HIBERNATION" option

noreply@blogger.com (Anonymous) — Sat, 15 Oct 2011 00:16:00 +0000

Did you know you can shut down your computer & when you restart them you will findeverything as it was, Such as windows and running programs!.

This property is called "hibernation" so let's learn how to do it.

1 - Click on Start

2 - Click on Run

3 - then type this command :

powercfg.cpl

4 - Click on OK.

5 – You will see the "Power Options Properties" window, Click on "Hibernate" tab.

6 – Make a tick on "Enable hibernation" option .

7 - Click OK.

8 – Now:

Start –> Turn Off Computer

9 – Stay pressing the "Shift" key, the "Stand by" icon will become "Hibernate"

10 – Click on it .

Next time when you running your computer you will find everything as it was!

How to lock your folders without programs!

noreply@blogger.com (Anonymous) — Sat, 15 Oct 2011 00:14:00 +0000

Do you want to have some privacy?
Do you have files or things that belong to you, you alone?
And you want to hide them so that no one can reach it except you?
I Will show an effective way to do it without any special programs.

Steps :

1 - Click on Start

2 - Click on Run

3 - then type the following :

notepad

4 - Then click on OK.

5 - Paste the following code inside the notepad :

cls
@ECHO OFF
title Folder Special
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Special goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Special "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Special
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Special
echo Special created successfully
goto End
:End

type your password here = Replace it with your password

6 – Then Save the (TXT) file (( File –> Save As… )) as :

locker.bat

in My Documents (Or any place you want).

7 – Now go to My Documents (Or were you save the file) you will find a ( Locker ) commanding.

8 - Double click on it.

9 - After clicking you will see a new folder (Special ),

Here you will put your files or anything which you want to hide or protect.

10 - After that again go to ( LOCKER ) and click on it.

11 - It will open and ask you want lock your folder? Y/N ?

Type the letter Y.

You will find that the file disappeared and can not be reached only by you.

12 - Now to view or unlock it again, Click on ( Locker ) and type your password .

Delete your files without irreversibly

noreply@blogger.com (Anonymous) — Sat, 15 Oct 2011 00:13:00 +0000

Tip of the day is how to delete files from the roots , you may know that you can recoverya file with some programs, but this way you will not never be recovered or get it back…

The steps:

1 - Click on Start

2 - Click on Run

3 - then type the following :

cipher /w:C:

So that C represents the partition that you want to clean it of impurities means, for example if you delete files from the partition D

You write "cipher /w:D:"
4 - DOS window will open with you let him work

Thanks for reading!

Customize "Send to" menu

noreply@blogger.com (Anonymous) — Sat, 15 Oct 2011 00:00:00 +0000

If you want to add a special folder or a local disk … to the drop-down menu "Send to"

The method is simple…

1 - Click on Start

2 - Click on Run

3 - then type the following command :

Sendto

A window appears which have the Places where you can send a file to them

you can paste your own folders as shortcuts in this window and they will show in the list "Send to" see the following picture: