everythingyouneed

FREE IDM REGISTRATION

2014-04-25T10:57:00.002+05:30

FREE IDMRegister your Internet Download Manager Free Forever with Step by Step Detailed Methods. Easy to follow guide on How to Register IDM Free? Once Implementation of This technique is Needed and Always have Latest version of IDM for free. It is the easiest and safest way to have free registered Internet Download Manager (IDM) lifetime and with your Name. You will find Other Tips and Tricks as well. REGISTRATION

IDM TIPS & TRICKS

New Detailed Method of IDM Registration Has been Published with Step by Step Guide with Pictures:

Hack or crack IDM manually :

OLD METHOD:

Step 1: Download the Latest IDM from Here or If you already have IDM installed Update it by going to Help then to check for Updates.If you don't wanna update your version, Just click on Registration.

Step2: After you click on registration, Now a new dialog window will appear that is asking for FirsName, Last Name, Email Address and Serial Number.

Step3: Now Enter you name, last name, email address and in field of Serial Key enter any of the following Keys:

RLDGN-OV9WU-5W589-6VZH1

HUDWE-UO689-6D27B-YM28M

UK3DV-E0MNW-MLQYX-GENA1

398ND-QNAGY-CMMZU-ZPI39

GZLJY-X50S3-0S20D-NFRF9

W3J5U-8U66N-D0B9M-54SLM

EC0Q6-QN7UH-5S3JB-YZMEK

UVQW0-X54FE-QW35Q-SNZF5

FJJTJ-J0FLF-QCVBK-A287M

And click on ok to register.

Step4: After you click ok, it will show an error message that you have registered IDM using fake serial key and IDM will exit. Now here the hack starts.

Step5: Now Go to C:/ then Windows the System32 then Drivers and then etc.

Note : For Windows 7 users, due to security reasons you will not be able to save hosts file.

so follow this steps :

First of all go to C:/ drive then go to Windows Folder and then go to System32 folder and then go to Drivers folder and then go to Etc Folder, in the Etc folder you will see the hosts file.

Step6 (windows 7 or vista): Now right click on hosts file and go to its properties, then go to security tab and then select your admin account, just below u will see an edit button (in front of change permissions), Now give the user full control and write and read rights and then click on apply and then click on Ok, now u will be able to edit the hosts file and save changes in it.

Open with Notepad

Now copy the below lines of code and add to hosts file as shown above image box :

127.0.0.1 tonec.com

127.0.0.1 www.tonec.com

127.0.0.1 registeridm.com

127.0.0.1 www.registeridm.com

127.0.0.1 secure.registeridm.com

127.0.0.1 internetdownloadmanager.com

127.0.0.1 www.internetdownloadmanager.com

127.0.0.1 secure.internetdownloadmanager.com

127.0.0.1 mirror.internetdownloadmanager.com

127.0.0.1 mirror2.internetdownloadmanager.com

After adding these piece of code, save the notepad file. And exit from there.

Now start your Internet download manager, and now you IDM has been converted to full version and specially when you update next time, your registration will not expire.

That means it will remain full version for life time and you can update it without any problem in future.

This is the Picture proof of Successfully Hacked IDM:

I hope you are now able to convert your Trial version of IDM into Full Version. If you have any problem in this tutorial on

How to register Internet Download Manager for lifetime free, IDM free lifitime registration, IDM registration free, IDM registration keys

2014-04-23T21:01:00.003+05:30

How to register Internet Download Manager for lifetime free,

IDM free lifitime registration,

IDM registration free,

IDM registration keys

Internet Download Manager Activation :

Hello Everyone with our first tutorial >>
Today we are going to learn how register Internet Download Manager without any crack and by this way no "fake serial number" message will appear ....
Just Follow these steps :
1 - Go to : http://www.internetdownloadmanager.com/download.html
and download the latest version of IDM from there .
2 - After downloading , run idman***.exe from where you have downloaded to .
3 - After installation ,it will ask you to register the program , ignore it and just exit .
4 - Press (Windows+R) , run interface will appear , enter "drivers" and then press "OK" and then go to "etc" folder .
(an alternative to step 4 :
Go directly to : C:\Windows\System32\drivers\etc )
5 - a file called "hosts" will be found there , open this file using Notepad or any text editor you like ....
6 - Copy these information without the quotation symbols to the end of content of that file :
"
127.0.0.1 tonec.com
127.0.0.1 www.tonec.com
127.0.0.1 registeridm.com
127.0.0.1 www.registeridm.com
127.0.0.1 secure.registeridm.com
127.0.0.1 internetdownloadmanager.com
127.0.0.1 www.internetdownloadmanager.com
127.0.0.1 secure.internetdownloadmanager.com
127.0.0.1 mirror.internetdownloadmanager.com
127.0.0.1 mirror2.internetdownloadmanager.com
127.0.0.1 mirror3.internetdownloadmanager.com

"

7 - Now open IDM and register your program with your name and email and enter one of these serial numbers :

OP3BQ-I5EAR-UN52H-VR7QX
7TSFG-YWZ5O-YWLSB-89N41
ZJ14C-KHNV1-I9YPK-YITD9
84X1I-3HVW3-MX7ZK-QBG0M

Congrats , Now you have activated your version of IDM perfectly ..

Pls see the below video.

Send Unlimited Free SMS with Airtel Connection in india

2010-04-14T11:54:00.003+05:30

Send Unlimited Free SMS with Airtel Connection in

india

This is particularly for all the airtel india users. By using this trick you can send unlimited free sms throughout India free of cost by using your airtel connection. There is nothing better than getting messages free of cost and that too throughout the country, no charge for the STD messages also. To start using this trick you just need to configure your airtel phone a little bit, the procedure to which is given below.

Procedure to get started given below

1. The first thing you need to do is create a new service message centre which can be easily done by accessing the message settings option.

2. Now select a name for your connection and the foremost thing is to use the number +919810051905 in the message center number field.

3. Once you are done with this you should set the preferred connection as the packet data. To this you need to go into the phone settings and look in the connections menu for the option of preferred connection.

4. The next step is to change the access point. Access point settings can be accessed from the internet message options and it should be changed to airtel live.

5. After doing this you are all set to use the trick but just remember one thing, you need to add a 0 before each number you want to send message.

This trick may turn out to be really good but as a matter of fact I have not tried this trick yet. So all those who are going to try this, leave back your comments for the ones who will be trying

AdSense Tip – Attract New Advertisers to your Site

2010-04-09T22:44:00.001+05:30

Google AdSense is an auction based advertising system so your advertising revenue (or CPMs) will automatically go up if more advertisers choose to target your website.

The system, in simple English, works like eBay. You (the website owner) are selling ad space and the buyers (in this case, advertisers) are competing against each other to grab that space. The bid amount will therefore increase as more buyers enter the auction process thus benefiting the seller (you).

Increase your Site’s Visibility on the Google Ad Network

Advertisers are using tools like DoubleClick Ad Planner to determine which websites on the Google Ad Network they should target and you therefore need to ensure that your website is both visible and discoverable in these tools.

For instance, here’s a public listing of my blog on Ad Planner. This report is like a marketing brochure that you are handing out to an unknown number of prospective clients daily through Google and therefore it always should have updated information.

Advertisers can see the type of ads that are accepted on the site, the traffic details (pulled from Google Analytics), the topics that are covered by the site (categories) and other information that will help them quickly decide whether or not they should include the site in their campaigns.

In this video, Vijay Vachani of the AdSense team will walk you through the steps that are required to add your website to Google Ad Planner.

Step 1. If you have not added your website to Google Webmaster Tools yet, do that first. Sign-in to Webmaster Tools using your Google Account and add the site URL.

Step 2. Once your site is verified, go to the Publisher Center of Google Ad Planner and include the site** to your Ad Planner profile. If you have just added your site to Webmaster Tools, it may not immediately show up in Ad Planner.

Step 3. Finally, click the “Edit Site Info” link to assign a good description and relevant categories to your site. Google will automatically present a rough estimate of your site’s traffic to advertisers but you can give them a more accurate picture by allowing Ad Planner to use data* from your Google Analytics account.

In addition to creating your own Ad Planner Profile, you may also want to implement these three simple yet effective suggestions by Lauren Weitzman to attract advertisers:

Always allow text and image ads on your site.
Create channels for placement targeting so advertisers can target specific slots on your site (see #16).
Always put the main ad unit above the fold.

[*] When you share Google Analytics data with DoubleClick Ad Planner, the same data may also be displayed in Google Trends for Websites.

[**] You might want to use Chrome or Firefox when using Google Ad Planner because some of the features of the site don’t work in IE.

Create a Mail Merge with Gmail and Google Docs

2010-04-09T22:42:00.001+05:30

Let’s say you are organizing a party at your place and want to send personalized email invitations to all your friends. Or say your company is about a launch a new product and you want to share this with media and customers through email.

In both the above examples, all your email messages will essentially have the same content but some elements will be unique (like the recipient’s name) in every copy. For instance, when you are sending a casual email to friends, you might want to have “Hi [Friends’s nickname]” as the greeting while in the case of customers, you will prefer a more formal greeting with their first names.

Mail Merge can obviously save you plenty of time as you can send personalized email messages to multiple people at once. The feature is neither available in Gmail nor Google Apps but there are workarounds like:

Option #1. You can connect your Gmail account with Outlook and then use the Mail Merge feature of Microsoft Office Word to send bulk email messages through Gmail but from your desktop.

Option #2. You can use web based services like MailChimp, Constant Contact, Campaign Monitor, etc. for sending personalized mass emails but they aren’t free.

If none of the above options work for you, here’s a third and better solution – you can setup Mail Merge in Gmail through your Google Docs account – it’s both free and easy to setup. Let’s get started.

Step 1: Assuming that your already have a Gmail account, go to your Google Contacts and create a new Group (let’s say “Media”). Add all the contacts to this group who you want to send a personalized email.

Step 2: Create a copy of this spreadsheet into your own Google Docs account.

Step 3: You’ll see a new “Mail Merge” menu in Google Docs near “Help.” Click “Import Gmail Contacts” and authorize Google Docs to access your Google Contacts.

Step 4: Click Mail Merge –> Import Gmail Contacts again and type the name of the Gmail group (“Media”) that you created in Step 1. Google Docs will now automatically import the relevant Gmail contacts into the spreadsheet.

Step 5: Fill the various fields of the email template (highlighted in green). Change the email subject, email body (line 1-5), fill in your name and also the reply-to email address.

Step 6: Go to the Mail Merge menu again and click “Start Mail Merge” – the status against the names of your Gmail contacts will change from “Pending” to “OK” for all email messages that are successfully delivered through Google Docs.

That’s it! You’ve just completed your first mail merge through Gmail and Google Docs. If any of the steps are not clear, please watch the following video screencast.

Custom Email Templates for Mail Merge

If you would like to use a different email template with mail merge, you can go to Tools –> Scripts –> Script Editor and change the sendEmail() function accordingly.

Here’s the full source code of the macro that runs on the Mail Merge spreadsheet but before you make any changes, please read this section to get yourself familiar with the Google Docs’ scripting environment. Google Docs also supports file attachments and HTML emails so you can be more creative with your email templates.

I have used this in batches of 10-20 email addresses and that has worked without issues but I’m not sure if the Gmail sending limit (that can temporarily lock accounts) applies to Google Docs or not.

Also, the above spreadhsheet uses Gmail but you can also use it with Yahoo! Mail or your Windows Live Hotmail contacts. I’ll share the exact steps in a later tutorial.

Submit a Complete Sitemap of your Blogger Blog to Google for Better Indexing

2010-04-09T22:15:00.000+05:30

Sitemaps, in simple English, are text files (see example) containing a list of all web pages that exist on your site. It is important that you create a comprehensive sitemap as it will help Google and other search engines crawl your site better and that might mean more traffic coming your way in the long run.

The Problem with Blogger Sitemap Files

Ideally, the sitemap file should contain all URLs of a site but if your blog is hosted on blogspot.com (or if you are using a self-hosted version of Blogger with a custom domain), you’ll be surprised to know that the default sitemap file (see example) contains only the 26 most recent pages of your blog.

That’s a bad thing because some of your older blog pages, that are missing from the system-generated sitemap file, may never get indexed in search engines. There’s however a simple solution to fix this problem.

Generate a Complete Sitemap for your Blogger Blog

Step 1: If you haven’t done this already, sign-in to your Google Webmasters account and add your blog. For details, check this video tutorial on how to add a blog to Google.

Step 2: Once your blog is added to Google, open the Sitemap Generator and type the full address of your blogspot blog (or your self-hosted Blogger blog).

Step 3: What you get is list of sitemap files that contain each and every page of your blog. You now just have to ping Google, Yahoo and Bing to inform them about these XML sitemaps.

As shown in the video screencast below, you need to manually add each of the sitemap files into your Google Webmaster Tools dashboard but for Bing or Yahoo, you can simply click blue hyperlinks and these search engines will automatically download the relevant sitemap files from your blogspot site.

Once all the Sitemaps are added, your Google Dashboard should look something like this.

If you see a red cross or an orange exclamation symbol instead of the green tick, that means something is wrong with your XML sitemap. Verify that the file exists by typing the sitemap URL in your browser.

Sometimes media enclosures (like MP3 files) in blog posts can create warnings during sitemap submission. And if you have switched from Blogger to WordPress, it still makes sense to submit sitemaps of your old Blogspot blog as that will only help search engines discover your new WordPress pages. Good luck.

Add Your Blog Sitemap to Google Webmaster

2010-04-09T22:06:00.002+05:30

Add Your Blogspot Blog Sitemap to Google Webmaster Tools

Step 1. Open the Google Webmaster Tools website at google.com/webmasters and click "Add a Site" button to submit your Blogger blogger.

You can either type the web address (URL) of your blogspot.com blog or even a self-hosted blog where you are using the Blogger platform with your personal domain.

Step 2. Google will ask you to verify that you are the owner of this blog. Just copy-paste the meta code to the clipboard and then paste* this information into the template of your Blogspot blog.

*You should switch to the "HTML" version of your blog template and paste the code just below the tag.

Step 3. Go back to Google Webmaster Tools and select "Sitemaps" from the right sidebar. Now click the "Submit a Sitemap" button.

Step 4. Type atom.xml?redirect=false and submit. Once the clock status icon changes to a green tick, your Blogger sitemap has been successfully submitted to Google for indexing.

* If you are using FeedBurner for your Blogger RSS Feeds, the redirect=false parameter will force Google to download your Blogger feed and not the FeedBurner feed.

36 Mobile Games in 1

2010-04-06T16:49:00.005+05:30

These are the most beautifully drawn, full-screen, ambient games.

176x220 J2ME gaming platform.

Some of the games are:

Absolute Minesweeper

Bomberman 3D

FIFA World Cup, Germany

Lemmings

Pixudoku

Sonic the Hedgehog, part 1

Sonic the Hedgehog, part 2

Star Wars, Imperial Ace

Townsmen 4

Gun Fever

Tetris Mania

V-Rally 3D

Vijay Singh, Pro GOlf

Virtua Tennis, Mobile Edition

Download Link :

Download Here

Password :

www.warezscene.org

36 Mobile Games in 1

2010-04-06T16:49:00.002+05:30

Make a File the Size you Need

2010-04-06T16:48:00.001+05:30

How to make a file of the size you want ?
Let us assume you want to make a file of size 10000kb
Convert it to bytes -> 10000*1024 which comes out to be 10240000 bytes

Open calculator (win key+r -> type in calc )
Choose view mode to be Scientific one
Type in 10240000 and convert it to hex it comes out to be 9C4000
Convert this value to 8 digits by padding zeroes to its left -> so finally it comes out be 009C4000

Open Command Prompt (win key + r -> type in cmd )
Type DEBUG filename.dat
it'll show file not found error ,ignore it
Type RCX -> Enter -> then last four hexadecimal numbers i.e. 4000 ->Enter
Type RBX -> Enter -> then first four hexadecimal numbers i.e. 009C->Enter
Type W ->Enter
Type Q ->Enter

W stands for write and Q for quit

Now check the file you just made by dir command ->dir filename.dat

Using the same technique you can make files as big as you want

Here is an image to show how exactly everything can be done

http://etricks.in/2008/06/making-file-of-size-you-want.html
Contributed by PcTrickz(Gokul.s) on Friday, July 04, 2008

How to Read deleted messages in mobile..!

2010-04-06T16:47:00.002+05:30

A SMS once deleted can’t be read again….but sometimes we hurrily delete some important SMS

Here is the technique that must be followed to retrieve deleted SMS.

Required utility:

1) Any system explorer or file explorer program (eg. fileman or fexplorer.provided with the package)

Step 1) Open Fexplorer

Step 2) Select drive C: or D: depending on the memory in which the Sms messages have been saved.

Step 3) For example u selected c: , Then open “system” folder.

step 4) Then in “system” folder open “mail” folder.

step 5) Then in this folder u will see different folders (eg 0010001_s) and certain files (eg 00100000). These files are the actual messages. Browse through every folder and open all files till u get the sms u are looking for.

Step 6) For opening the files don’t choose options>file>open as it will show format not supported rather choose options>file>hex/text viewer. By selecting the “Hex/ text viewer” u ll be able to open and read the deleted SMS message

Contributed by PcTrickz(Gokul.s) on Friday, July 04, 2008

Thursday 3 July 2008
Bluetooth provides an easy way pf communication for a wide range of mobile devices to communicate with each other without the need for cables or wires and transfer files in between them.

Note: But it can be a potential threat for a person privacy.

Various Softwares For Bluetooth Hacking

BlueScanner - It search out for Bluetooth devices and extract much amount of information of the newly discovered device.

BlueSniff - It is a simple utility for discovering hidden Bluetooth devices.

BlueBugger -It simply exploits the BlueBug vulnerability of the bluetooth enabled devices. By exploiting these vulnerabilities and leakes, you can gain access to the phone-book, calls lists and other information of the bluetooth device.

BTBrowser - Is a Bluetooth Browser is a J2ME app. which can browse and explore all the surrounding Bluetooth devices. Browse to different kind of device information.

Motarola Mobile Tips

2010-04-06T16:45:00.002+05:30

Motorola 930
-------------
press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Battery Saving Mode
Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola 930

The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.

Motorola 6200
--------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

UK (Orange)
AU

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered left to right, keypad up, battery down

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector

Motorola 7500
-------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

IT (model: F16 HW: 5.2 SW: 2.1)

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs
Numbered right to left, keypad up, battery down looking

1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin

Motorola 8200
--------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector

Motorola 8400
-------------
(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector

Motorola 8700
--------------
*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

AU, IT, SG, DE, ES, ZA

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Motorola CD 160
---------------
Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola CD 520
----------------
Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola d460
--------------
#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Motorola V3688
---------------
#06# for checking the IMEI (International Mobile Equipment Identity)

Enhanced Full Rate Codec (EFR):

To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK

NOTE: Nothing appears on Screen.

Internet Explorer 7 Keyboard Shortcuts !

2010-04-06T16:45:00.001+05:30

Keyboard Shortcuts :

CTRL+click (Open links in a new tab in the background)
CTRL+SHIFT+click (Open links in a new tab in the foreground)
CTRL+T (Open a new tab in the foreground)
ALT+ENTER (Open a new tab from the Address bar)
CTRL+Q (Open Quick Tabs - thumbnail view)
CTRL+TAB/CTRL+SHIFT+TAB (Switch between tabs)
CTRL+n (n can be 1-8) (Switch to a specific tab number)
CTRL+9 (Switch to the last tab)
CTRL+W (Close current tab)
ALT+F4 (Close all tabs)
CTRL+ALT+F4 (Close other tabs)

3D Studio Max Keyboard shortcuts

2010-04-06T16:43:00.000+05:30

eInformation:This guide is based on 3D Studio Max 7.

Snaps Action Table :
Snap To Edge/Segment Toggle : Alt+F10
Snap To Endpoint Toggle : Alt+F8
Snap To Face Toggle : Alt+F11
Snap To Grid Points Toggle : Alt+F5
Snap To Midpoint Toggle : Alt+F9
Snap To Pivot Toggle : Alt+F6
Snap To Vertex Toggle : Alt+F7

Main UI :

Adaptive Degradation Toggle : O
Align : Alt+A
Angle Snap Toggle : A
Arc Rotate View Mode : Ctrl+R
Auto Key Mode Toggle : N
Background Lock Toggle : Alt+Ctrl+B
Backup Time One Unit : ,
Bottom View : B
Camera View : C
Clone : Ctrl+V
Cycle Active Snap Type : Alt+S
Cycle Selection Method : Ctrl+F
Cycle Snap Hit : Alt+Shift+S
Default Lighting Toggle : Ctrl+L
Delete Objects : .
Disable Viewport : D
Display as See-Through Toggle : Alt+X
Environment Dialog Toggle : 8
Expert Mode Toggle : Ctrl+X
Fetch : Alt+Ctrl+F
Forward Time One Unit : .
Front View : F
Go to End Frame : End
Go to Start Frame : Home
Hide Cameras Toggle : Shift+C
Hide Geometry Toggle : Shift+G
Hide Grids Toggle : G
Hide Helpers Toggle : Shift+H
Hide Lights Toggle : Shift+L
Hide Particle Systems Toggle : Shift+P
Hide Shapes Toggle : Shift+S
Hide Space Warps Toggle : Shift+W
Hold : Alt+Ctrl+H
Isometric User View : U
Left View : L
Lock User Interface Toggle : Alt+0
Material Editor Toggle : M
Maximize Viewport Toggle : Alt+W
MAXScript Listener : F11
New Scene : Ctrl+N
Normal Align : Alt+N
Open File : Ctrl+O
Pan View : Ctrl+P
Pan Viewport : I
Percent Snap Toggle : Shift+Ctrl+P
Perspective User View : P
Place Highlight : Ctrl+H
Play Animation : /
Quick Align : Shift+A
Quick Render : Shift+Q
Redo Scene Operation : Ctrl+Y
Redo Viewport Operation : Shift+Y
Redraw All Views : `
Render Last : F9
Render Scene Dialog Toggle : F10
Restrict Plane Cycle : F8
Restrict to X : F5
Restrict to Y : F6
Restrict to Z : F7
Save File : Ctrl+S
Scale Cycle : Ctrl+E
Select All : Ctrl+A
Select Ancestor : PageUp
Select and Move : W
Select and Rotate : E
Select By Name : H
Select Child : PageDown
Select Children : Ctrl+PageDown
Select Invert : Ctrl+I
Select None : Ctrl+D
Selection Lock Toggle : Space
Set Key Mode : '
Set Keys : K
Shade Selected Faces Toggle : F2
Show Floating Dialogs : Ctrl+`
Show Main Toolbar Toggle : Alt+6
Show Safeframes Toggle : Shift+F
Show Selection Bracket Toggle : J
Snap To Frozen Objects Toggle : Alt+F2
Snaps Toggle : S
Snaps Use Axis Constraints Toggle : Alt+D, Alt+F3
Sound Toggle : \
Spacing Tool : Shift+I
Spot/Directional Light View : Shift+4
Sub-object Level Cycle : Insert
Sub-object Selection Toggle : Ctrl+B
Top View : T
Transform Gizmo Size Down : -
Transform Gizmo Size Up : =
Transform Gizmo Toggle : X
Transform Type-In Dialog Toggle : F12
Undo Scene Operation : Ctrl+Z
Undo Viewport Operation : Shift+Z
Update Background Image : Alt+Shift+Ctrl+B
View Edged Faces Toggle : F4
Viewport Background : Alt+B
Virtual Viewport Pan Down : NumPad 2
Virtual Viewport Pan Left : NumPad 4
Virtual Viewport Pan Right : NumPad 6
Virtual Viewport Pan Up : NumPad 8
Virtual Viewport Toggle : NumPad /
Virtual Viewport Zoom In : NumPad +
Virtual Viewport Zoom Out : NumPad -
Wireframe / Smooth+Highlights Toggle : F3
Zoom Extents All Selected : Z
Zoom Extents All : Shift+Ctrl+Z
Zoom Extents : Alt+Ctrl+Z
Zoom In 2X : Alt+Shift+Ctrl+Z
Zoom Mode : Alt+Z
Zoom Out 2X : Alt+Shift+Z
Zoom Region Mode : Ctrl+W
Zoom Viewport In : [, Ctrl+=
Zoom Viewport Out : ], Ctrl+-

Track View

Add Keys : A
Apply Ease Curve : Ctrl+E
Apply Multiplier Curve : Ctrl+M
Assign Controller : C
Copy Controller : Ctrl+C
Expand Object Toggle : O
Expand Track Toggle : Enter, T
Filters : Q
Lock Selection : Space
Lock Tangents Toggle : L
Make Controller Unique : U
Move Highlight Down : Down Arrow
Move Highlight Up : Up Arrow
Move Keys : M
Nudge Keys Left : Left Arrow
Nudge Keys Right : Right Arrow
Pan : P
Paste Controller : Ctrl+V
Scroll Down : Ctrl+Down Arrow
Scroll Up : Ctrl+Up Arrow
Snap Frames : S
Zoom : Z
Zoom Hrizontal Extents Keys : Alt+X

AutoCAD Shortcut Keys

2010-04-06T16:42:00.000+05:30

CTRL+A - Selects ALL objects in drawing

CTRL+B - Toggles Snap

CTRL+C - Copies objects to Clipboard

CTRL+D - Toggles coordinate display

CTRL+E - Cycles through isometric planes

CTRL+F - Toggles running object snaps

CTRL+G - Toggles Grid

CTRL+H - Toggles PICKSTYLE on/off

CTRL+J - Executes last command

CTRL+L - Toggles Ortho mode

CTRL+N - Creates a new drawing

CTRL+O - Opens existing drawing

CTRL+P - Prints current drawing

CTRL+R - Cycles layout viewports

CTRL+S - Saves current drawing

CTRL+T - Toggles Tablet mode

CTRL+V - Pastes data from Clipboard

CTRL+X - Cuts objects to Clipboard

CTRL+Y - Repeats last action

CTRL+Z - Reverses last action

CTRL+[ - Cancels current command - forget this - use escape key

CTRL+\ - Cancels current command - forget this - use escape key

F1 - Displays Help

F2 - Toggles text window on/off

F3 - Toggles OSNAP

F4 - Toggles TABMODE

F5 - Toggles ISOPLANE

F6 - Toggles COORDS

F7 - Toggles GRIDMODE

F8 - Toggles ORTHOMODE

F9 - Toggles SNAPMODE

Tips, Tricks and shortcut codes about GMAIL

2010-04-06T16:40:00.002+05:30

Gmail shortcuts

C: Compose new message.
Shift + C: Open new window to compose new message.
Slash (/): Switch focus to search box.
K: Switch focus to the next most recent email. Enter or "O" opens focused email.
J: Switch focus to the next oldest email.
N: Switch focus to the next message in the "conversation." Enter or "O" expands/collapses messages.
P: Switch focus to the previous message.
U: Takes you back to the inbox and checks for new mail.
Y: Various actions depending on current view:
Has no effect in "Sent" and "All Mail" views.
- Inbox: Archive email or message.
- Starred: Unstar email or message.
- Spam: Unmark as spam and move back to "Inbox."
- Trash: Move back to "Inbox."
- Any label: Remove the label.
X: "Check" an email. Various actions can be performed against all checked emails.
S: "Star" an email. Identical to the more familiar term, "flagging."
R: Reply to the email.
A: Reply to all recipients of the email.
F: Forward an email.
Shift + R: Reply to the email in a new window.
Shift + A: Reply to all recipients of the email in a new window.
Shift + F: Forward an email in a new window.
Shift + 1 (!): Mark an email as spam and remove it from the inbox.
G then I: Switch to "Inbox" view.
G then S: Switch to "Starred" view.
G then A: Switch to "All Mail" view.
G then C: Switch to "Contacts" view.
G then S: Switch to "Drafts" view.

Our Recomendation for Free Email service (It can replace Gmail. Try it your self).

Drafts

Gmail now has the capability to save "Drafts" of your messages! If you are in the middle of composing a message, but want to finish it later, just click on the "Save Draft" button now located between the "Send" and "Discard" buttons. This droops the message in a new view located on the left side called "Drafts" located under the "Sent Mail" link and above the "All Mail" link. Later, you can just click on the message, complete it, and then click "Send" normally.

Cleaning Your Contacts

One of Gmail's "features" can leave you with extra entries in your Contacts list. Gmail has a (debatably) nice feature that automatically adds to your Contacts list the email addresses of those to whom you send emails. While this can be helpful at times, just remember that EVERY unique email address you send to gets auto-added.
Log into your Gmail account and click on the "Contacts" link at the top of any Gmail page. A window will open displaying any Contacts you may have. Any you have manually edited will typically have a "Name" and possibly a "Note" associated with it. By default, any Contact Gmail auto-adds and is unedited will not contain any "name" or "note" information, just the email address. Visually scan down the list and look for any that fall into this category. If you find one, determine what to do with it: Delete is, Edit it, or leave it alone. Obviously what you do with it is up to you,

What Happens To Sent Messages

When you "send" a message, two things happen to it:

it gets copied into your "All Mail" view, and
it is visible in the "Sent Mail" view.

Many email clients and Webmail services let you optionally delete all sent messages by default, but Gmail doesn't offer this feature. Here's why...
One of Gmail's intentions is to get you out of the "trash everything" mindset. This is one of the reasons why they offer 1GB of storage.

About Labels

You can add a Label to a message in one of two ways:

If you are viewing a message listing, you can just click the checkbox next to the message, click on the "Apply label..." dropdown, and select the Label you want to apply. Gmail will display the Label just to the left of the message's Subject.
If you are viewing a message, just click on the "Apply label..." dropdown, and select the label you want to apply. Gmail will display the new label to the right of the Subject line.

OK, you assigned a Label to a message, but at a later time, you want to remove it. How do you do that? Just select the Label view from the Labels box on the left, "select" the specific message by clicking the checkbox next to the message, and then click on the "Remove label 'xxxx'" button at the top of the listing. Your label has now been removed!

Reading Messages

Note a couple things: First, no external graphics are displayed. By default, Gmail disables displaying externally referenced graphics. The reason is that many spam messages contain externally referenced graphics. When they are displayed, the email sender can use this to track that you opened the message thus validating your email address for future spam. Clicking on the "Display External Images" link will display the images if you want.
There is one glaring problem: If the original email is HTML or Rich Text formatted, Gmail will strip out ALL formatting including links, fonts, and images. ie: you can only reply in plain text.

Nokia NSeries Themes free download

2010-04-06T16:36:00.002+05:30

link:-full themes ౮మ్బ Click below to Download తేఅమేస్

30 Beautiful Vista themes for XP!!!

2010-04-06T16:31:00.002+05:30

File Size: 218 MB Compressed to 15 MB

Download Here

COOL FONT TRICK

2010-04-06T16:30:00.000+05:30

FONT TRICKS
wanna write like this █████████
☺☻☺☻☺
steps:
1. press and hold alt
2. press nos 7,3,1 one after the other
3. release alt
simple as it is.....

███████████████████████████████████████████████████

easily make hearts! with 2 keys only!
press alt.

hold it there

n in the num pad press 3

ull get ♥ try making ♫ with 14

wanna write like this▒▒▒▒▒▒▒
steps:
1. press and hold alt
2. press nos 9,4,5 one after the other
3. release alt
try it

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Restart Your frnds fone Using SMS

2010-04-06T16:27:00.001+05:30

here is a new trick to restart ur friends mobile via sms

with this trick only 1110,1110i,1112,1100,2100 can be restarted.

just type

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

or 79 inverted commas
You might also like:

Tips for using Search Engine

2010-04-06T16:25:00.000+05:30

If you want to search for any topic using search engine, the search engine will search with the given information and will provide a list of links of websites along brief description about each website.

Along with using the right search terms, the following points must be noted to search the information on the internet:

*
Use + sign between words if you want to search for all words. For example, to search blogs of Internet Tips, type as: Blogs+Internet+Tips
*
To search the exact match, write the words in double quotation marks. For example to search the Internet Tips, then type as: "Internet Tips"
*
Avoid to use "and", "or" with search keywords, because these words will affect the search result.

Orkut Softwares

2010-04-06T16:24:00.000+05:30

Here in this post, I'm going to tell you about three softwares which can be very usefull while doing orkuting.

1. Orkut Cute: It is an interesting software which can be used for:

* Sending a same scrap to all your friends including hyperlinks.
* Starting a same topic in all your communities.
* Get Notifications like "New Profile View" or "New Scrap" etc.

2. Orkut Scrapboy: This is awesome software generally known as Orkut Messenger which can be used for sending and receiving instant scraps from your friends without a web browser. It gives you more Convenience and speed while scrapping.

3. Orkut Toolbar: This toolbar makes navigation in orkut much easier by providing some user friendly buttons in menus. It also provides features like Pop up Blocker, email alerting, OnlineRadio etc.

All these softwares are easily available on many internet websites which can be downloaded free of cost. You can search these softwares on your favourite search engine.

Common GSM Network codes

2010-04-06T16:23:00.000+05:30

* Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status.

--> Call waiting
--> Activate call waiting *43*#
--> Deactivate call waiting #43##
--> Check status of call waiting *#43#

--> CLIR: Presentation of one's own number to the to the called party
--> Activate CLIR **31#
--> Activate CLIR for the actual call *31#number
--> Deactivate CLIR ##31#
--> Deactivate CLIR for the actual call #31#number
--> Check status of CLIR *#31#

--> Change call barring code **03*OldCode*NewCode*NewCode#

--> Change call barring code **03*330*OldCode*NewCode*NewCode#

--> Change PIN code **04*OldPIN*NewPIN*NewPIN#

--> De-register all call diversions ##002#

--> Activate unconditionally divert all calls *21#

--> De-register unconditionally divert all calls ##21#

--> Deactivate unconditionally divert all calls #21#

--> Check status of unconditionally divert all calls *#21#

--> Divert on no answer to number and activate **61*number#

--> Activate divert on no answer *61#

--> De-register divert on no answer ##61#

--> Deactivate divert on no answer #61#

--> Check status of divert on no answer *#61#

--> Divert on not reachable to number and activate **62*number#

--> Activate divert on not reachable *62#

--> De-register divert on not reachable ##62#

--> Deactivate divert on not reachable #62#

--> Check status of divert on not reachable *#62#

--> Divert on busy to number and activate **67*number#

--> Activate divert on busy *67#

--> De-register divert on busy ##67#

--> Deactivate divert on busy #67#

--> Check status of divert on busy *#67#

--> Check status of barr all outgoing calls *#33#

--> Activate barr all calls **330*code#

--> Deactivate barr all calls #330*code#

--> Check status of barr all calls *#330*code#

--> Activate barr all outgoing calls **333*code#

--> Deactivate barr all outgoing calls #333*code#

--> Check status of barr all outgoing calls *#333#

--> Activate barr all incoming calls **35*code#

--> Deactivate barr all incoming calls #35*code#

--> Check status of barr all incoming calls *#35#

-->Activate barr all incoming calls when roaming **351*code#

-->Deactivate barr all incoming calls when roaming #351*code#

-->Check status of barr all incoming calls when roaming *#351#

-->Activate barr all incoming calls **353*code#

-->Deactivate barr all incoming calls #353*code#

NOKIA Mobile - codes

2010-04-06T16:21:00.000+05:30

1 Imagine ur cell battery is very low, u r expecting an important call and u don't have a charger.

Nokia instrument comes with a reserve battery. To activate, key is "*3370#"

Ur cell will restart with this reserve and ur instrument will show a 50% incerase in battery.

This reserve will get charged when u charge ur cell next time.

*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone uses the best sound quality but talk time is reduced by approx. 5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound
but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

2 *#0000# Displays your phones software version,

1st Line :S oftware Version,
2nd Line : Software Release Date,
3rd Line : Compression Type
3 *#9999# Phones software v ersion if *#0000# does not work

4 *#06# For checking the International Mobile Equipment Identity (IMEI Number)

5 #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

6 #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

7 #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

8 #pw+1234567890+4# SIM Card Lock Status.(use the "*" button to obtain the "p,w" and "+" symbols)

9 *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone)

10 *#21# Allows you to check the number that "All Calls" are diverted To

11 *#2640# Displays security code in use

12 *#30# Lets you see the private number

13 *#43# Allows you to check the "Call Waiting" status of your phone.

14 *#61# Allows you to check the number that "On No Reply" calls are diverted to

15 *#62# Allows you to check the number that "Divert If Unrea chable(no service)" calls are diverted to

16 *#67# Allows you to check the number that "On Busy Calls" are diverted to

17 *#67705646#R emoves operator logo on 3310 & 3330

18 *#73# Reset phone timers and game scores

19 *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it
means you will get the best standby time possible

20 *#7760# Manufactures code

21 *#7780# Restore factory settings

22 *#8110# Software version for the nokia 8110

23 *#92702689# (to rember *#WAR0ANTY#)

Displays -
1.Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again

24 *#94870345123456789# Deactivate the PWM-Mem

25 **21*number# Turn on "All Calls" diverting to the phone number entered

26 **61*number# Turn on "No Reply" diverting to the phone number entered

27 **67*number# Turn on "On Busy" diverting to the phone number entered

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button

Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).

Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©<
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©
Deactivate barr all outgoing calls #33*code#©
Check status of barr all outgoing calls *#33#©
Activate barr all calls **330*code#©
Deactivate barr all calls #330*code#©
Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#©
Deactivate barr all incoming calls #35*code#©
Check status of barr all incoming calls *#35#©
Activate barr all incoming calls when roaming **351*code#©
Deactivate barr all incoming calls when roaming #351*code#©
Check status of barr all incoming calls when roaming *#351#©
Activate barr all incoming calls **353*code#©
Deactivate barr all incoming calls #353*code#©
Check status of barr all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

Common Filetypes

2010-04-06T16:20:00.000+05:30

if a file does not appear to have a filetype extension, open the folder it is stored in and click on Tools from the menu, then Folder Options. Click on the View tab and un-tick Hide extensions for known file types.

* .avi - video file. Open with Windows Media Player
* .bmp - image file. Open with Paint
* .cfg - configuration file.
* .dat - data file.
* .doc - document file. Open with Word
* .exe - program file. Double-click to run
* .gif - image file. Open with Paint
* .htm - web document. Open with Internet Explorer
* .html - web document. Open with Internet Explorer
* .ini - text configuration file. Open with Notepad
* .jpeg/jpg - image file. Open with Paint
* .mov - movie file. Open with Quicktime
* .mpeg/mpg - video file. Open with QuickTime
* .mp3 - audio file. Open with Windows Media Player
* .pdf - secure document file. Open with Adobe Reader
* .pps - slideshow presentation. Open with PowerPoint
* .ppt - presentation file. Open with PowerPoint
* .sys - system file.
* .txt - text file. Open with Notepad
* .wav - audio file. Open with Windows Media Player
* .xls - spreadsheet file. Open with Excel
* .zip - compressed file. Open with WinZip