Crafts Making Money | keychains with names | wire name keychain | how to make keychains |

Andy Turner's Own Craft Busines Review

2012-02-09T19:09:00.000-08:00

Craft Business, whether for offline or online, are not for the fainthearted. But like any entrepreneurial set-up, they have their rewards. In 2008, I decided that I would set up an Internet-based craft making money business, selling my own keychains with name and also those of other established Internet Craft Business just like Andy Turner.

Let me tell you the benefit of marketing your products or services online. First of all, That start-up is so cheap. In "Own Craft Business"by Andy Turner, he wrote that his Internet based craft Business requires lower costs, like the start-up capital, advertising and marketing, and he has a wider target market reach than his physical wirename outlet.

There are lots of info about doing crafts online but I know that you are looking for simple step-by-step guide and are affordable. It is always nice to get involved in arts and crafts but wouldn't it better if you also made money out of them? am I right?

The Andy Turner Own Craft Business will show you what to do and not to do in your own wirename craft business.In his ebook, he revealed his best-kept secret on bending certain difficult letters, what tools he used and the type of wires used for wirename bending. On top of that, he also show how he makes money and how you too can make money out of your newly-learned craft.

He shared on how he makes money showcasing his wirename through craftshows, market and events with the unique skill that are exposed on this ebook. This guide is an easy to follow step by step roadmap for making simple wire name jewelry that can help you earn extra cash on the side.

The best thing is that it does not matter whether you are a newbie or what your previous experience are because with this “the Andy Turner Own Craft Business” you will be guided and will show you what exactly you need to do.

With this guide, you will see bending wires in a completely new light. With the help of this guide, you will be able to learn jewelry skills that are practical and can be learned by anyone. It can help you learn a craft that can make you earn more or less a thousand dollars a week with the use of just a few simple tools.

It will show you how you can become skilled at wire name making even if you are just new to making jewelry. The guide contains closely guarded secrets of the wire making and writing craft that you can use to start up your own business.

And the best thing about this is you need not spend too much to get started. What is more is you need not give up your day job for this. If you go and get your own copy of the Andy Turner Own CraftBusiness guide, you might just very well say how thankful you are for giving time for a new craft. Get started on it today!

Click Here For Own Craft Business Instant Access Now! .

I have discovered my niche market, I have created a suitable product which (Wirename Keychain) and I am on my way to creating a full time income. What about you?

HOT OFFER!

You can have all the skills under your belt that you need in this ebook to make a constant $1,574 a week, or even more, you can sell more from the comfort of your own home through a website or ebay !

Or you can just add to your hobby list with the added bonus of being able to make Birthday and Christmas presents !

If you decide to purchase, I really wish you the best of luck with this amazing skill that has seen me through all these years..

Get it HERE

All the best,
Cornelius

John Wirename Necklace

2012-02-07T20:03:00.000-08:00

I found a video on Youtube that will help guide you in creating your first wirename keychain. This will be very helpful for those wanting to know more on how to bend certain letters. I especially loved the way this guy bend his letter "J". It was so nice!

Tools Needed:
1. Round-Nosed Pliers
2. Wire Cutter
3. Silver Plated copper size 18 gauge or 1.0 mm.

In my early days, one of my main problem is finding where I can buy the wire to be use for my name keychains. You can find this in a lot of bead shops, craft shops but if you want to use it for your business, I recommend ordering it from Griffin.de (a German supplier). However, in order for you to order from them, you need to be company.

It's worth it, even with shipping, as it works out that you can buy it for roughly $2 a roll whereas if you buy it in local craft stores you will pay $7 - $9.

Enjoy the tutorial video below.

Was that helpful! You must be excited to get started on your own project now! Have a look at some of my wirename projects below.

HOT OFFER!

Wirename Writing And How To Make It A Profitable Business

2012-02-07T04:10:00.000-08:00

Wirename Writing Tips for running a business with your new found name making skill

General tips for wire work

Use the pliers as a vice rather than using them to twist the wire itself. Use the other hand to manipulate the wire.

Use the file to carefully remove any marks left by the pliers on the wire. This works with pure wire or alloys but not plated.

The first small letter after the capital determines the size of all the other letters following, make sure the first letter isn’t too large or small, because then the whole name will be either large or small – this really comes with practice and what you are making the name for – necklace, brooch or something else.

The spacing matters too, same applies – whatever space you have between your first two letters should remain constant wherever possible throughout the name. Generally, spacing should be slightly greater in smaller names (3, 4 or 5 letters) and reduced in long names (7,8,9 letters)

Any symbol can be made at the end of the name, I use a heart basically because I learned that from my teacher, but I have made treble clefs (music notes) and stars in the past, best to keep it simple if you are selling them though.

Buy a silver cloth if you are working with any type of silver wire, it is invaluablefor first using it when you straighten the wire prior to making the name, and when you have finished making the name it removes any marks or fingerprints.

Whenever a small letter I follows a letter with a loop above the baseline – eg: lower case l or f make the loop on the l or f very slim to make room for the letter i which is raised slightly above the rest of the lower case letters because of the dot.

Remember too that any other letters in the name with loops above the baseline should be slim also to match the l or the f.

When making a lower case n always make the spacing very small just before you make the letter n. When you complete the n you will see why, the spacing automatically widens due to the method used in making the n.

The underline on the names that I make are basically to strengthen the name to make it more robust. You can leave the underline off though if you wish and terminate the name just after you make the heart and loop it once around the upstroke of the wire just before you come to the heart. This works best with short names where the strength isn’t so important, but it can cause havoc on long names where they are easily bent out of shape without the underline.

In the past I have made name bracelets as there is a demand for them. I did drop the idea selling them though, as they require extra work. I didn’t find an easy way to stop them getting snagged on clothing and the people who bought them would lose them quickly. That is not to say there isn’t a method of making name bracelets (or anklets) from the wire they just need to be more robust somehow.

There are lots of applications for personalizing using the wire names. Here are a few I have come across:

Name necklaces
Name brooches (pins)
Name tie pins
Letter holders (made with thicker aluminum wire)
Name Bracelets
Name Anklets
Name Earrings
Names on cakes
Names to personalize anything you can glue them to
House names (made from thicker wire)

There are undoubtedly more applications – plenty of scope for the imagination !

If you are thinking of making the names for a living, make some for friends and family first to get their approval. Also in a situation where you are selling directly to the public you will need to make the name fairly quickly on a “while you wait” basis so you should get the time it takes to make the name down to at most 10
minutes.

To carry your business around with you, you can use a laptop bag or any similar sized bag and one of those plastic compartmented fishing trays. In my kit I carry most of the stuff needed to make names.

Here is a list of what I carry in my bag and which may help you also:

2 x long nosed pliers (one fine and one regular)
A pair of snips or cutters
A pair of scissors
A 12 inch (30cm) ruler to measure chains
Pens
A Black Marker
Silver cloth
Sterling silver wire 1 mm dia, and 0.9 mm dia (for the jump rings),
silver plated wire, gold fill wire
Jump rings (the rings that attach the chain to the wire in necklaces)
Sterling silver chains of different lengths
Small pieces of black card to mount the name on
Larger pieces of black card to protect the name in transit (when I post names)
Re-sealable plastic bags to put the name in
Stamps for postage
Rectangular pieces of contact (cut from a big roll) to protect the address labels
Sheets of address labels to print the sending and receiving addresses

If you want to sell your names at craft fairs or markets, the simplest way to display your wares is to construct a display unit from pin boards or cork boards. You can then mount these on a portable table of some kind. I used to use an artists easel, very light and portable.

Your setup at markets and fairs etc is typically very simple and requires a small space at the market or fair which is a great advantage rent wise. I used to fit easily into a 2 m space. Also you can rent a space with a friend as an alternative which helps with stuff like toilet breaks and getting food as they can look after your setup while you are away.

Over the years I had built up a large stock of popular names,. This helps enormously when you are selling in front of the public as it means you don’t have to make every name. I found roughly that I sold 50% of my names from stock and 50% making them on the spot. This means you double your takings. Names vary in popularity according to the country you are in, but you should be able to find a list on the net of say the top 50 or 100 names or more.

You can store your stock in plastic sealed bags which protects them from oxidizing. If exposed to the atmosphere they will tarnish over time and it is an arduous process to clean them. Always have a large float of change when you work at a market or fair – there’s nothing worse than running out and having to hassle your stall holder neighbors for change.

A money pouch or belt is the best to store your float in, it saves you
being separated from your money and the possibility of getting it stolen.

HOT OFFER!

Custom Keychain with Colour: Practical and Classy, But Cheap!

2012-02-07T00:33:00.000-08:00

Custom Keychain for Sale

Keychains are virtually best-selling keepsakes for everyone. What causes keychains so hot? It is because of its usefulness. Oftentimes we possess a few: for house, for workplace, cars, for our letter box. More or less most of us even hold keys for neighbours, kinsfolk or friends houses. Then, what is the most effective method to organise our keychains?

With several keychains of course! This is why my custom keychains comes in handy.

For Malaysian

PRICE: RM5
Colours Available: Pink, Purple, Silver, Blue, Green, Red, Yellow.
Postage: RM3.50 for up to 10 JKeychains. (Sabah)
RM5.00 for up to 10 Keychains (Sarawal & Peninsular Malaysia)
Payment Option: Local Bank transfer via Maybank or CIMB.

For international buyer, you may ORDER and Pay using PAYPAL.

International Buyer

PRICE: USD 5.00
Colours Available: Pink, Purple, Silver, Blue, Green, Red, Yellow.
Minimum Order: 30 Units
Payment Option: Local Bank transfer via TT or Paypal.
Postage will be confirmed later.

HOT OFFER!

FREE WireName Tutorials

2012-01-24T01:59:00.000-08:00

Please check out the this page for more tutorials as this list will be updated from time to time.

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

HOT OFFER!

Contact Me

2012-01-24T01:56:00.000-08:00

How to Reach Me

Homepage:
http://www.corneliushenry.com
E-mail:
malaysianhomebusiness@gmail.com

Instant Messaging:

Yahoo: consxavier

skype: cornelius_henry

HOT OFFER!

Wire Jewelry Step by Step : Mother

2012-01-24T01:28:00.000-08:00

Wire Jewelry Step by Step : Mother

Before I start the lessons, you need to know a few things.

1. The wire can not be too soft. If you start with the soft wire, your names are not

going to be easy to make them latter on. 28 g. round is good.

2. If you use sq. wire you need to pay attention every time you bend it because it will

twist, for sure. {In this case you need square nose pliers to untwist it}

3. Always pinch the wire from the back when bending.

Do not unbend (Go back to do it better} because it will brake

4. Make sure your work is flat and even while you are working the piece otherwise is

going to be difficult to do it later.

5. Get 15 inches of wire so you practice more than once.

6. Be patient, maybe the first few times is not what you expect but practice will get

you there. {My first one looked like a license plate in zig zag big and uneven}

Now here we go on the wire name lessons:

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

TUTORIAL 3: "Mother" Pendant

1. Start about 1½ inches from the end of the wire, turning the long piece of the wire to the

front of the pliers; make a loop {one complete circle}.

2. Working on the long piece of the wire; pinch a little less than ½ of an inch and bend to

the back.

3. Press it down at the top, roll the top to the right just a little bit. You are rolling two wires

together (picture #1 in tutorial #1)

4. Grasp the wire at the top and pull it to the right, a little bit.

5. Grasp the wire at the middle, and bend it back and up, pinch a little; pull it to the right.

6. Grasp the wire at the top even with the first part of the “M” and bring it down; pinch at

the top ( you made the “M”)

7. Grasp the wire at the bottom even with bottom of the “M” and bring it up

8. Grasp it about half way from the “M” , bring it down to the right to make a hump

(see picture #1)

9. Grasp the wire from the back at the bottom and bring it up through the front

(see picture #2)

10. Grasp the wire at he back; on the left side of the circle and bend it to the right

( see picture #3) you are making the “o”

11. Leave the pliers there and bring wire to the left and down to make the “o”

(see picture #4)

12. Grasp the two wires at the bottom and through the “o” bring it up (see picture #5)

13. Grasp it at the top even with the “M” and bend it to the back.; pinch it at the top.

14. Grasp it from the back at the tip; bend it to the right.

15. Grasp the wire that you just bend, an bring it around the pliers and the wire; to the

front of the “t” you are making the cross of the “t” (see pictures in tutorial #2)

16. Grasp it at the back and bend it down and hide it behind (carefully pinch the cross of

the “t'” ) making sure is even and you do not see the back wires.

17. Grasp it at the bottom of the “t' and bend it up.

18. Grasp the wire even with the top with the “t” bend it down and to the front looks like

an “L”.

19. Grasp it at he bottom and bend it up, toward you and pinch it a little.

20. Grasp it in the back about the level of the “o” and bend it to the right, to make a hump

you made the “h”.

21. Grasp the wire at the bottom and bring it up; grasp it even with the “o” and bring it

down through the front to make the “e”.

22. Grasp it at the bottom and bring up, (grasp it even with the “e”) and bend it back and

down, pinch it at the very top and bring it up.

Grasp it close to the bend top and bring down (see picture #6) you have the “r” Grasp

it at the bottom through the back and bring it up

Congratulations: You finish the pendant: MOTHER.

Now; take the end; grasp it a little higher than the tip of the “M” (

look at the picture for reference) and bend it up, fold it back and around the

pliers twice, to form a double loop; then around the wire twice to finish it;

cut the excess in the back.

This is for the chain; do the same with the piece of wire that you left in the very beginning.

Finish filing the ends and carefully crimp the ends.

Polish it a little and Enjoy it!!!

Cut the extra wire in the first loop, make it look like a heart. Fold the wire to make a loop

to hang do it twice. Put it on the name.

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

HOT OFFER!

Wire Jewelry Step by Step : Beth

2012-01-23T23:11:00.000-08:00

Wire Jewelry Step by Step : Beth

Before I start the lessons, you need to know a few things.

1. The wire can not be too soft. If you start with the soft wire, your names are not

going to be easy to make them latter on. 28 g. round is good.

2. If you use sq. wire you need to pay attention every time you bend it because it will

twist, for sure. {In this case you need square nose pliers to untwist it}

3. Always pinch the wire from the back when bending.

Do not unbend (Go back to do it better} because it will brake

4. Make sure your work is flat and even while you are working the piece otherwise is

going to be difficult to do it later.

5. Get 15 inches of wire so you practice more than once.

6. Be patient, maybe the first few times is not what you expect but practice will get

you there. {My first one looked like a license plate in zig zag big and uneven}

Now here we go on the wire name lessons:

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

TUTORIAL 2 : Beth Pendant (Part 1)

1. Start about 1½ inches from the end of the wire, turning the long piece of the

wire to the front of the pliers; make a loop {one complete circle}.

2. Working on the long piece of the wire; pinch a little less than ½ of an inch

and bend to the back.

3. Press it down at the top, roll the top to the right just a little bit. You are rolling

two wires together (picture #1 in tutorial #1)

4. Working on the back of the wire; grasp it at the top and bend it up and to the

left and to the back of the “B” you should have a “P” (picture #1).

5. Grasp the wire in the cross of the “B” inside loop ( picture #2) and bend it to

the front.

6. Grasp the two wires from the back and; bring down the wire forming a half

circle, go around the back to form the 'B' (picture #3)

7. Grasp the wire at the bottom and bring it up to make the “e”.

8. Grasp it about half way from the “B” , bring it down to the right to form a loop
(you made an “e”).

9. Grasp the wire from the back at the bottom and bring it up (picture #4)

10. Grasp the wire even with the “B” and bend it to the back.; pinch it at the top
(picture #5)

11. Grasp it from the back at the tip; bend it to the right (picture #6)

12. Grasp the wire that you just bend, an bring it around the pliers and the wire;
to the front of the “t” you are making the cross of the “t”.

13. Grasp it on the other side of the “t” and bring it to the back (make sure is
even with the front).

14. Grasp it at the back and bend it down and hide it behind (carefully pinch the
cross of the “t'” ) making sure is even and you do not see the back wires. (picture #7)

15. Grasp it at the bottom of the “t' and bend it up.

16. Grasp the wire even with the top with the “t” bend it down and to the front
looks like an “L”.

17. Grasp it at he bottom and bend it up, toward you and pinch it a little.

18. Grasp it in the back about the level of the “e” and bend it to the right, to
make a hump you made the “h” (picture #8)

19. Congratulations you finish the name. Now, take the end; grasp it a little

higher than the tip of the “B” (look at the picture for reference) and bend it up,

fold it back and around the pliers twice, to form a double loop; then around the

wire twice to finish it; cut the excess in the back.

This is for the chain; do the same with the piece of wire that you left in the very beginning.

Finish filing the ends and carefully crimp the ends. Polish it a little and Enjoy it!!!

Part 2 “Beth” Pendant with dangling heart

20. TO DO THE HEART, take about 2 ½ ” of wire and bend it in half, pinch it and roll it,

open the two ends. Grasp it about ½ inch and bend it down, (make one loop) grasp the

other side and do the same. Grasp it at the top of the second loop and bend it back; pinch it .

Cut the extra wire in the first loop, make it look like a heart.

Fold the wire to make a loop to hang do it twice. Put it on the name.

You can go to other tutorials by clicking the link below. Thank you.

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

HOT OFFER!

Wire Jewelry Step by Step: Amy (Pendant)

2012-01-23T03:12:00.000-08:00

Wire Jewelry Step by Step : Amy

Maggie has worked hard on this tutorial for all the people looking for a kickstart in learning wirename crafts. So Thanks to Maggie=)

During my early days, He tutorials helped me a lot!

Before I start the lessons, you need to know a few things.

1. The wire can not be too soft. If you start with the soft wire, your names are not

going to be easy to make them latter on. 28 g. round is good.

2. If you use sq. wire you need to pay attention every time you bend it because it will

twist, for sure. {In this case you need square nose pliers to untwist it}

3. Always pinch the wire from the back when bending.

Do not unbend (Go back to do it better} because it will brake

4. Make sure your work is flat and even while you are working the piece otherwise is

going to be difficult to do it later.

5. Get 15 inches of wire so you practice more than once.

6. Be patient, maybe the first few times is not what you expect but practice will get

you there. {My first one looked like a license plate in zig zag big and uneven}

Now here we go on the wire name lessons:

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

Tools You Need

Wire,
cutters,
round nose pliers
{maybe square nose pliers.}

Happy twisting!!!!!!

Now here we go on the wire name lessons:

TUTORIAL 1 : “Amy” Pendant

1. Start about 1½ inches from the end of the wire, turning the long piece of the wire to the

front of the pliers; make a loop {one complete circle}.

2. Working on the long piece of the wire; pinch a little less than ½ of an inch and bend to

the back.

3. Press it down at the top, roll the top to the right just a little bit. You are rolling two wires

together (picture #1)

4. Working on the back of the wire; grasp it at the top and bend it up. (picture #2)

5. Grasp it at the top of the “A” and bring all the way down. (picture #3)

6. Grasp it at the bottom of the “A” (second leg) making sure the wire is on the front; and

bring it to the left all the way around the pliers (you have made another loop and the front

part of the cross of the “A”)

7. Grasp it at the cross of the “A” this time in the front and bring the wire around and to

the back of the “A”. Hide this wire behind the one in the front.( It should looks like the

picture # 4)

8. Press it down a little bit. To clamp it.

9. Grasp the wire next to the tip of the loop (picture #5) bring it down to make a hump.

10. Grasp at the bottom (should be even with second loop) bring it back and up, pressing a

little at the foot of the first hump.

11. Grasp in the back the top of the leg you just made and bring it over to the right.

(second hump)

12. Grasp the wire and bend it to the back and up again; grasp it in the back and make

another hump. You should have a complete “m”.

13. Grasp it on the bottom of the “m” bend wire to the right and up; grasp the wire at the

top; make it even with the “m” and bring down. Press it a little. You got the first leg of the
“y”

14. Grasp it at the bottom bring to the right and up.

15. Grasp it at the top (a little higher than the first part of the “y:”) bring it to the back and
down; press it at the top and roll the two wires together a little bit. (you should have the
“y” )

16. From the back grasp the tail (wire should be in front of the pliers) bring to the left and
up to the right.

17.Now, take the end; grasp it a little higher than the tip of the “A (look at the picture for reference) and bend it up, fold it back and around the pliers twice, to form a double loop; then around the wire twice to finish it; cut the excess in the back. This is for the chain; do the same with the piece of wire that you left in
the very beginning. Finish filing the ends and carefully crimp the ends. Polish it a little and
Enjoy it!!!

Congratulations you finish the name.

You can go to other tutorials by clicking the link below. Thank you.

Lesson # Description

One Amy

Two Beth

Three Mother

Four Cindy

Five Diane

Six Evelyn

Seven Ruby

Eight Frida

HOT OFFER!

Teen Gift Idea To Bring Delight To The Hard To Please

2012-01-23T02:50:00.000-08:00

With their seemingly endless adolescence problems, the teen age group is probably the hardest to please with a gift idea. This makes picking out a gift idea for a teen a very challenging and arduous task indeed. The sort of task that many parents and relatives dread with a capital "D".

Fortunately, once again, a wise and shrewd parent or relative seeking a teen gift idea can settle for the tried and tested age old idea that has never been known to disappoint. We are of course talking about jewelry here.

But even within a jewelry idea of a teen gift, there is a wide range of different ideas to choose from. This is because there are many different jewelry items to choose from. The teen gift idea that you end up will also be greatly impacted by the gender of the teen that the gift is targeted at. Teen girls are probably the category that has the widest possible choices of items and ideas available in jewelry. But then they will tend to be more difficult to satisfy and please with a gift than their male counterparts.

Some of the possible wire jewelry items that you can seriously consider for your teen gift idea to a girl include wire name pins and brooches, Cabochon pendants, neck wire and earrings to name but a few.

Another useful factor to consider when agonizing over the right teen gift idea in jewelry is the character and personality of the person being gifted. This can assist you greatly when it comes to settling on certain specifics and finer details of the teen gift idea.

Still what you will have going for you when looking for a teen gift idea is the fact that the finishing touch you put will add tremendous value in the recipients' eyes. And that is the personalization of the jewelry by curving out their name or initials on the item. There are many beautiful ways in which this can be easily accomplished amongst most of the leading online dealers in wire name jewelry.

Article Source: http://EzineArticles.com/198206

HOT OFFER!

About Me

2012-01-23T00:50:00.000-08:00

Make More Money online and offline with this Unique craft of Making Personalized

Name Jewelry

Hi there,

My name is Cornelius Henry. I am from Kota Kinabalu, Sabah, Malaysia and I've created this blog to share my passion and interest in wirename bending. I know that you found this blog after searching online.

My goal for this blog is to help you learn more about this wirename craft that I love and to point you to resources either FREE or PAID. I will be paid whenever you buy any products from the links I shared in this blog and I thank you for it.

I am also a freelance internet business consultant and you can contact me by going to my website Internet Business Enterprise.

HOT OFFER!

My Wedding Fund

2011-10-07T08:30:00.000-07:00

Thank you for visiting our page! We just started this to help us fund our dream wedding!

The money collected will go towards...Our wedding reception dinner that will be held at Rainny's hometown in Penampang on the 10th Dec (Sat) 2011 at Pusat Kebudayaan Sabah, Penampang.

I am asking for support to make sure our wedding can still happen as originally planned.

The money collected will go towards photography, food catering, property rental, and sound system.

To keep some of our plans for the ceremony and reception we are asking for your help since our financial situation has changed since the plans were originally put into motion.

Any and all supports are appreciated more then we can express to you here.

The help we receive will make our day even more special knowing that our friends and family supported us in this celebration.

Supporters can also donate direct to my bank accounts
Full Name: Cornelius Henry
a. Maybank , 110108248806
b. CIMB, 10130000345525

If you are unable to support financially, please share this link with others and pray for our marriage and ministry and that the Lord would open the door for us.

Thanks=)

Raise Money Online

2011-08-07T11:33:00.001-07:00

Jangan beli Sistem Auto Minisite Sebelum Anda Membaca Review Ini. www.squidoo.com/sistem-auto-minisite

Our Personalized Wirename Keychain Official Facebook Fan Page

2010-10-21T15:56:00.000-07:00

>This is to inform all my blog readers that my Personalized Wirename Keychain Facebook Fan Page is now open for interaction, comments, and there will be a lot of pictures posted in my fan page.

Testimonials

Dear Andy,

First I would like to thank you for the samples and laminated card I got in the mail yesterday. I have been making all kinds of jewelry for years . I love it and LOVE learning new things. It was frustrating trying to find instructions online.
Thank you again and Best Regards, Sylta Gravely, Franklin Square, NY, USA

Andy, I am having a ball I bought your ebook which is GREAT I just bent my first name YOLY which is easy but showed me that it CAN be done. I am left handed and I am adjusting to suit my hand. Sometimes forward means backwards !! but I am figuring it out.

Thank you, Jane Lopez, Pembroke Pines, Florida, USA

Dear Andy,

I have only had your Ebook 2 days and already I know I made the right choice..I purchased your ebook on name writing after many weeks of searching for the right instructor for me, on the internet. I have only had your book 2 days and already I know I made the right choice. Thank you so much! Sincerely,Victoria Lenning, Covington, LA, USA

HOT OFFER!

Wire Name Heart Pendant

2010-09-18T19:56:00.000-07:00

Hearts in the wire jewelry trade have been big sellers since the 1800s. This wire heart pendant with name inserted is easy to make and only takes a small amount of jewelry making wire. The name in a heart pendant is especially popular on Valentines Day and should be sold for...........

View the Original article

HOT OFFER!

How To Turn Scrap Fabrics into a Potholder ? Creative Handicraft

2010-08-31T09:25:00.000-07:00

If you need a gift for a special person, or just need some time to unwind, make a creative handicraft. Crafting is therapeutic when you are feeling stressed, and it also can yield a useful or decorative item. Everyone has some measure of creativity, and with modern kits and patterns, a creative handicraft does not have to end in frustration.

If you have a sewing machine, you can learn to make a creative handicraft that will be a useful and welcome gift. Potholders are a great beginning sewing project that can be made from scrap material or unwanted clothing and a bit of double-fold bias tape. Here are the simple instructions for this creative handicraft.

First cut two 8-inch (21 cm.) squares of fabric to be the front and back of the potholder. Choose coordinating fabrics that match your kitchen for these pieces. To make it easier, you can make an 8-inch square pattern from a piece of cardboard to use as a pattern. Cut more 8-inch squares of any old fabric to stack for the filling. You want the stack of fabric squares to be thick enough to protect you from a hot pot, but thin enough to be flexible and able to be sewn through.

Stack all layers so that the outer layers are facing to the outside and the filler layers are inside. You can put a couple of large straight pins through all layers to keep them together. Now sew right across the middle of the stack. Sew across the middle again, perpendicular to the first stitching. You will have divided the square into 4 squares. Sew across the stack again from corner to corner, and again from the other corner to corner. The layers should be joined and sturdy now.

To bind off the raw edges of your creative handicraft, trim with scissors so that all the layers are again even at the edges. Open out one folded edge of the bias tape. The wider bias tape might seem to be easier to use, but the narrow type makes a neater finished product. Starting at one corner, line up the edges of the tape with the edges of the potholder, and start stitching through all layers along the first fold line, which will be about 1/4 inch from the edge. Stitch neatly and slowly, attaching the opened tape all around the edge until you reach the beginning corner. Cut the bias tape off, leaving 3 inches, (7 cm.) to make into a hanging loop.

Fold the bias tape over the raw edge so that the middle fold lines up with the outside of the potholder and the other fold is hiding the raw edge of the bias tape. Now, for best results, hand sew the binding down, forming a loop on your creative handicraft when you get to the end.

This potholder is just one example of a creative handicraft you can create if you have a sewing machine. When it is finished, you will have a useful item made from all recycled materials. Feel free to give this creative handicraft away or keep it for yourself.
HOT OFFER!

Holiday Crafts: Thanksgiving Day ornamentations children can create

2010-08-29T11:57:00.000-07:00

Holiday Craft: Thanksgiving Day Craft

All these while I have been writing about keychain as my main craft. From now on, I will try to write about other type of craft that we learn to make on our own free time. In this article, I will write about Thanksgiving Day Craft that you can start doing with your cute little children. It will be a fun time.

Thanksgiving Day is a fantastic holiday! What a spiritual replenishment to take a day to chew over over the yesteryear about just how good God has been to you and your family, to give you harvest and protection, wellness and hope. To acquire the most out of this joyful affair, create some holiday crafts with your children. These days, Thanksgiving Day often gets forced out by Hallowe'en's eery ornaments and the lights and gala affair of Christmas. With the coming after holiday crafts, your house can be adorned for this less ruffled but significant celebration.

Turkeys are a natural pick for decorations. A known project at this time of year is for a youngster to retrace around her hand and make the ensuing drawing into a turkey. The thumb is the head and the fingers are the tail feathers all showed. Although many of the turkeys that are raised for food are now the domestic white assortment, the turkeys eaten by the Pilgrims at the first Thanksgiving Day were the wild brown ones. The tail feathers on a wild turkey are brown, but they are changeable. Capturing light and looking to be colorful. This is why children color the tail feathers in bright colors.

The turkey's head has a lappet under the pecker. This is a upright flap of loose skin that is blood-red colored. Be sure to draw this in order to make the hand turkey aspect like a turkey. Add up scrawny legs and bird feet. Once done, the kids can cut out the turkeys and hang them on the wall. It's really cute to make a whole flock of these turkeys in the sizes of all the hands in the family. The little hand shapes are particularly sweet.

Another good turkey decoration to make when making Thanksgiving Day holiday crafts is a turkey door decoration. Make a brown construction paper body and head of a turkey. Now make a large number of colored feather shapes. Each family member writes about a feather something he or she is grateful for before tying as part of the turkey's tail. Repeat till all the feathers are utilized, and string up the turkey on the front entrance to greet visitors with a message of gratitude. Make a sign to accompany the turkey that says "Give thanks to the Lord for He is good!" or simply "Be grateful!" or "We're thankful for you!" or whatever you like.

Youngsters love creating construction paper chains. To further decorate the house for Thanksgiving Day, let them make a paper chain in fall colors as one of their holiday crafts. Using 9 by 12 inch construction paper, cut the paper in half across the long side and cut the halves into one inch thick six inch long strips. Utilise a stapler to bind the ends of the strip into a circle. Coil the next strip into the circle and staple them. Keep on the process alternating colors of brown, red, yellow, and orange. When the chains are long, you can drap them along the ceiling or stair rail. If you don't make the door turkey, the children can write something they're thankful for on each strip of paper before adding it to the chain.

Thanksgiving Day is too nice a holiday to let the other more commercial holidays crowd it out. By making holiday crafts to decorate the home for Thanksgiving, you can keep this day special, too. The extended family, aunts, uncles, grandparents, etc., will be pleased to see the holiday crafts the young ones have made to decorate the house and make it cheerful for their visit.

If you're wondering how to make keychains then you information are available if you just seek for it. Interestingly I have found some people that are selling tutorials on how to make keychains name with wires.

HOT OFFER!

Keychains with names

2010-07-11T20:03:00.000-07:00

Have you ever wondered how to make cool keychains with names? Have you seen young dudes or chicks flaunting keychains with their names hanging on their school bags? It is trendy to have a personalized name keychain and it is more than just for holding your keys together.

I have been making personalized keychains with name for the past 2 years and I have never short on customers and most of my customers are students and mostly girls. If you are thinking of looking for the perfect and affordable personalized gift for your loved ones, look no further than this. You search has ended.

If you are searching online for keychains, you will be surprised at the amount of results that you get. You will see lots of sizes, style, shapes, colors and materials. Nowadays,people are looking for more than just a little cute keychains. They are looking for keychains with names that they can call their own.

There are so many keychains online. You can find keychains with the shape of snooker ball, animal shape, beaded name keychain, cartoon characters, animal shape, funny logo, brand logo, and so much more, but how about having your own name keychain? Keychains that are durable, tough, non rust and cheap keychains with names? Who would want to miss that, right?

You can even have your phone numbers on it? Imagine losing your bunch of keychains, maybe you accidentally left it behind while eating out at the nearby restaurant. You can recall where was the last place you might have left it. So, a stranger came and sat at the same table where you were sitting earlier. Then lo and behold he saw your bunchs of keychains with names and handphone numbers. Imagine what he would do? well, he might pass the keychains to the restaurant owner and let him return the keychains with your name to you or he can just text you on his mobile phone and let you know that your keychains are with him and will arrange a meet up to return the keychains.

can you see the power in having keychains with names? Now Imagine if you don't have a personalized keychains with your handphone number and name on it. I am not saying the typical name keychain that is commonly sold. I am talking about having a creatively, uniquely bended wirename keychain just for you type of keychain. Now imagine the same situation as above. You left your keychain somewhere and you don't know where did you lost it. And those who might find your keychains will not be able to contact you to return the keychains.

There are so many type of keychains sold online. Do you prefer a cute looking keychains that is just an object for holding your keychains together or are you looking for keychains that not only hold your keychains together but it also crafted with your names on it.

Where can you buy cool keychains with names?
To buy cool keychains you can type 'personalized wirename keychain' on google and you will see a few websites and blogs that you can make your secure purchase. Apart from that, you also join the facebook fanpage available for customers.

You will love to carry around your keychains with you. These keychains are cheap and it will surely fit your budget.

If you're wondering how to make keychains then you information are available if you just seek for it. Interestingly I have found some people that are selling tutorials on how to make keychains name with wires.

HOT OFFER!

Google forms Partnership to help SMEs

2010-02-05T02:18:00.000-08:00

Image via CrunchBase

The current economic downturn and its rather slow recovery progress has pressured Malaysian companies, particularly the 550,000-plus small and medium-sized enterprises (SMEs), to find new customers for their products and services when faced with declining sales and financial constraints.

At the same time, 15 million Malaysians and over a billion people worldwide use the internet and search engines to find information on products and services such as prices, reviews and even where to buy locally.

Realising the opportunities it presented, the Ministry of International Trade and Industry (MITI) is collaborating with Google and two local universities- the Multimedia University and the University Tunku Abdul Rahman (UTAR), to offer SME Business Stimulus Package that enables local SMEs to harness the cost-effectiveness and reach of the Internet to access a wider market and increase sales.

Google’s head of online, South East Asia, Chariff El-Ansari says that SMEs should use Google as a sales channel in order to grow their business internationally.

Those signing up for the package could potentially reach 73% of all internet users globally, including millions in Malaysia, who use the search engine to find information on products and services such as reviews and to compare prices,’he explains.

The offer is part of a Google’s campaign to get more business onto its search based marketing platform which currently dominates the market and is also being rolled out in Thailand and Singapore.

MITI secretary general Tan Sri Abdul Rahman Mamat says that representing 99% of all business in Malaysia, SMEs are the backbone of the nation’s economy.

“The current economic situation warrants that our SMEs enhance their capabilities and try new ways to find new customers locally and overseas through the internet. And this new package is very much in line with our mission to promote international trade and develop industrial activities to enhance Malaysia’s economic growth,’ he adds.

malaysian small and medium sized enterprises (SMEs) have lagged behind their counterparts in more advanced Western countries in tapping the potential of the Internet as a marketing and sales channel and many have yet to even establish a web presence.

Google earned roughly US$22 billion (RM74 Billion) last year, 97% of which came from selling advertising.

Any Malaysian SME that has a product to sell and a valid business permit can apply for the package,
Participants will enjoy:

A company website developed by MMU or UTAR students to promote their product s and services. The first 100 SMEs who register for the package and do not yet have a website will get it for free hosted by blogger.com. Subsequent participants need only pay a one-time fee of RM200 to MMU or UTAR for the website development work.
RM200 of free credits from Google to start an online marketing campaign with Google Adwords, Google’s search engine marketing platform.
A free one-n-one tutorial from a Google authorised representative on how to set up and maintain a search marketing campaign.
A FREE seminar by Google, in partnership with SME Corp, on starting and maintaining a website, marketing online and using Google technologes to promote their business.

To participate, businesses can sign up at www.google.com.my/stimulus.

Courtesy of MalaysianHomeBusiness

HOT OFFER!

Selling homemade crafts online

2010-01-30T01:03:00.000-08:00

Image via Wikipedia

Selling crafts online has become a industry and it's growing rapidly especially on the internet where there are already thousands of blogs, shops and websites where you can purchase approximately any type or style of handmade crafts.

Thanks to the scores of craft companies that at present create and produce the crafts for you, with no risk involve, a lot of individuals has taken the risk and begin their own craft company without having to spend any money. This nonetheless, has turn the craft business into a ferocious, competitive clash alongside every single one of the handcraft shop/website owners.

There are currently a lot of handcrafts websites online for clients to choose from and this is why starting your own online craft business can be demanding, disappointing, and extremely hard to draw customers and create the sales that you are expecting.

Well, I am not saying with the aim to discourge you but it's going to take a lot of time, sweat , and perhaps even some money for you to get on track and get regulars visiting your websites/blog.

You need to think about many things prior to opening your own online craft business. Merely creating a design , making it from used materials, and expecting it to be a big seller isn't going to do the trick and bringing you a lot of sales.

If you would like to set up your own craft business online just to get easy money quick akin to any other scheme on the internet claims, in that case you are looking at the wrong business. There's no such things as effortlessly making quick cash and you're constantly going to have to put in the sweat to obtain the outcome you are looking for, in particular for a craft business.

Now I am not trying to frighten you from owning your own craft business, as there are many thriving persons who have started their own business in the craft business and are doing extremely fine. I just want to give you the truth of reality so that you're not frustrated once your company isn't doing as well as you thought it would be.

You may be successful at one part of the business, but fall short in another, or you just might be that someone who is doing well at all the aspects of the business, which will apparently make your business a success. Either way, you're still going to have to use up the time and labor extremely hard to attain success

HOT OFFER!

Why Do We Need To Consider Selling Crafts Online?

2010-01-25T23:49:00.000-08:00

In September 2008, when the stock market crashed and the outlook for most of the economy is looking pretty bleak, business sites store chain leader Crafts Etsy.com sales reported an increase of 5% in August. Over 500,000 products sold in September to almost $ 8 million.

In total, Etsy craft sales tripled in 2008 over 2007, totaling more than $ 90 million in revenue for its business of arts and crafts that year. Remember, this growth in turnover of vessels has occurred despite the worst economic crisis of our generation.

In the 3 months after year, the last Christmas of 2008 in early March this year, 2009, over 150,000 items that include the word "hand" have been sold on eBay. That is 150. 000 copies for sale during the months of January, February and March, usually the slowest months of the year, sales of craft enterprises, even in a good economy.

Is your business getting its share of online sales Craft?

The good news is that those who sell handmade crafts in one of the businesses that are thriving in this recession. I am glad that I have a 'trade' that is not affected by the current economic downturn.

The bad news is that there are lots of competing craft business owners selling online and your sales have not taken off yet. So how do you get your share of the growing "buy handmade" trend?

The trick to actually make a profit are taking actions and not wasting time on what does not work. There are better ways that most people know to sell more of their crafts online

HOT OFFER!

Wire Writing Secret:- Small Investment Big Return

2010-01-06T10:05:00.000-08:00

"Have
You Ever Wondered How Much More Enjoyable Your Life Could Be if You
Started Your Very Own Craft Business from the Comfort of Your
House?"

Follow me as in this article as I share with you how Andy The Name Bender start this business step by step - everything revealed...

This is a REAL story of how he with very little skills in doing crafts learned an easy method of creating cheap and unique personalized gifts that attracts people's attention whenever they see his wire name.

I just want to share with those who are tired of the 'Get Rich Quick Scheme' victim and help everyone make money by starting their own home based craft business.

When you can show people how to make USD50 , USD100 or even USD1,000 in one weekend, it's GREAT!

I’ve spent the last 2 years of my life learning this straightforward home business system and I’ve made thousands of ringgits selling my personalized wire name and I learn from one of the best in the world of wire writing guru and now I want to share my trade secrets with you.

Introducing

"Have You Ever Wondered How Much More Enjoyable Your Life Could Be if You

Started Your Very Own Craft Business from the Comfort of Your

House?"

Although I have been on the doing this wirename business only for 2 years, I earned quite a sum of money that helps me pay my house rental, my phone bills and save up for my wedding day.

I believe that we should share good things with other people and since everyone wanted to know how I make my personalized name wire and I just thought it was time to pass on some of these trade secrets and thought revealing my 'guru' -the best person that has put up a system,an information product for those who wants to earn a considerable part time income.

This is one of the best wirename course on making personalized gift name wire jewelry in the world that you can get now and start working part-time, full-time, or maybe just making jewelry for the grandkids - the choice is yours!

There's no pressure just work at your own pace in the comfort of your own home, have some fun and make some money too.

And remember, the best part of this business is that it is a trade. Once you learn it, no one can ever take it away from you! You can bring it anywhere you like.

I remember sitting in one coffee bean outlet in Kota Kinabalu while doing wirename…some passer by saw what I was doing… asked me what am I doing …then and he requested for some names… told him the price…he agreed… he paid... I earned more than enough to cover my “Vanilla Ice Blended”..he’s happy , I am happy.

I went from Local Malaysian Craft Show markets making RM200 a weekend to online wirename keychain with revenues of RM4000 from just one bulk order from a school in Singapore (using the power on the internet)!

Now, don't think I didn't make lots of mistakes because I made more than my investment.

Intially, I made lots of dumb, costly mistakes that could have been avoided but after learning from this wire writing system. I had my steep learning curve cut short. But by trial and error Andy sorted through what works and what doesn't and packaged a step-by-step ebooks to start your own home based business making the most money with the least headaches.

I did so well making, that our local Crafts Agency, Kota Kinabalu personnel invited me to open up a booth at their yearly craft event in November 2009.

In fact I will guarantee that this Home Business Manual will give you the knowledge and skills needed to start your own small home jewelry business or your money back!

It's so simple you don't need a expensive equipment!

He'll train you---just follow this easy to learn instructions and learn the insider’s trade secrets with that will help you earn RM200 per day.Guaranteed!

Imagine selling just 1 wire name for RM10 for up to 7 letters? What if 20 people want to buy from you?

Remember that I make no promises to you, of making thousands of ringgits a month, like other eBooks sellers do; but, I do offer to be available for you, should you need extra assistance you can contact me using ‘skype’.But what I will tell you is that, it is possible to bring in some extra income each month, by selling your wirename jewelry.

Yes, of course, we all know that you will need to work at creating a business which will lead to bringing in extra money. In fact, we both know that you need to first work at perfecting your technique of selling, and of course, develop your own style of wire name writing style. The easier to read , the better.

There are hundreds of customers and they are just waiting for your craft items. It's EASY... First you decide to buy this "Personalized Wirename Writing System" , decided on what it is that you want to sell, take a photo of the item or scan it, and create a listing at mudah.com.my, 88db.com, ebay and etc and then decide just how busy you want to be and how many items you want to sell.

With Andy's wire writing secrets right beside you, it will be easy to follow along.It contains pictures showing you step by step. He will instruct you on exactly what steps for you to do next. Me on my part, I will also be available for you if you are stuck in anything in your wirename craft. Just contact me and I will try my best to assist you.

After reading Andy's eBook you will have an edge over other crafters and will have the knowledge to build a successful home based business without having to spend thousands of ringgits to buy expensive equipments.

However, this ebook is written for the absolute beginner, for those who may have never picked up a pair of craft’s tools in their life. Though it may be easier for those who have already used jewelry making tools it is my belief that anyone can make names if they put in enough practice and perseverance.

You may purchase this manual to either pursue this skill as a hobby, or you may be looking to make some extra cash to supplement your income or indeed to use it while travelling, or as a home based business.

It is our aim that by the end of this manual you can be confident that you will be able to make a name from wire and go on to pursue any of the above objectives just like me.

Remember,You will get Andy's wirename jewelry making system that enabled me to make a great part time income. I work from the comfort and convenience of my home, my overhead is low and love what I'm doing every minute.

HOT OFFER!

how to make keychains; a side income opportunity

2009-11-09T08:06:00.000-08:00

I am a BIG believer that where there is a will, people will find a way. I work hard on my wirename craft for the past 1 year to produce a beautiful and unique name key chains that you can't find any where else. The handwriting style is uniquely mine.

I am also thinking about how I can help more and more people with my wirename keychain..my goal is to influence and encourage more and more people to have the will to go for their dreams.

If I were to share with you how I started my online craft business selling personalized keychains, will you be interested to learn? Just for the sake of learning how to make keychains as a business..it will worth your while.

There are so many ways for you to start your home based business. Some home based business may require special location, some may require special skills like mine ...wire bending..some may require a s special interest, like learning to make keychains.

So many ways...let me repeat..there are so many ways for you to earn a good side income.Like me, I started a small online craft business, running my wirename keychain business from home. Thanks to the internet, I was able to market my keychain even if I'm sleeping or working outside.

If I were to teach you to learn to make keychains from plain looking wire just by using 4 simple tools, will you be interested? If I were to teach you the secret of the trade, will you take up that opportunity?

If I were to share with you how the business operates? will you come often to http://wirename-craft.blogspot.com? I will show you what kind of special equipment or training that you might need and how much it will cost to start up a business just like mine.

If you find that you would like to try this kind of business,what you will ultimately create will be different from the way I am doing it. The basics might be similar but you will give it your own personal spin and make it truly yours.

Don't wait! begin Now and start taking steps this week towards a small business of your own.

HOT OFFER!

What has this blog got to do with New Zealand Natural?

2009-10-23T09:14:00.000-07:00

Hi guys,

Sorry if this blog post is different from my previous post. This time I purposely write this blog post to help my good bro and friend- Terence and his wife Deborah to win a year supply of ice cream..

The rain has been pouring nonstop all day! It's pretty cold where we are, but we're still craving for ice cream! Are you the type who eats even MORE ice cream when its cold? Do your friends stare in shock when you enjoy a cone and everyone else is shivering? ;)

Welcome to the official fan page of New Zealand Natural Malaysia!

Ice cream fans from all over the world are most welcome too, so join us and share the ice cream love!

Ever had ice cream in a fridge? Well, I stuffed myself into one... in hope I could win TO HAVE MORE! Help click 'like' on the picture! :)

http://www.facebook.com/photo.php?pid=2799947&op=1&o=global&view=global&subj=12081696871&id=675023152

NZN - taste best, even in the coldest condition!

Name: Deborah Chan
Email: maildebster@gmail.com

*Click 'like' on my pic. (You'll need to be a fan first)

How to Give a Craft Workshop?

2009-10-21T10:24:00.000-07:00

How to Give a Craft Workshop

from wikiHow - The How to Manual That You Can Edit

So... you've been crafting for a while... and so many people have asked you how you do that craft that you're considering putting on a workshop? Perhaps your local craft shop has an interest in you coming in to demonstrate your craft? Here are some things to consider...

Steps

Think through your needs. You will need space, supplies, a method of communicating so that everyone can hear, good lighting, comfortable room, etc.
Plan your presentation. Make a lesson plan of sorts... what will you say? What order will you present it in? How will you make your presentation interesting and easy to remember?
Register the participants in some way... either by paying for the class or by RSVP. This will allow you to get a handle on how many people to plan for and how much you will need in the way of supplies and elbow room. This also gives you contact information for each participant so you will be able to follow up later if you want.
Arrange for space. If you have a large number of potential participants and space is at a premium, you could do several smaller classes instead of one larger one. On the other hand, if you have a large room, you may need some sort of public address system so that everyone can hear.
Arrange for supplies and make detailed lists of supplies necessary to do this craft. Nothing is so small that it does not matter. Things like pins, needles, measuring tape etc. can make or break the class.
Space chairs and tables comfortably. Too few tables for too many people leads to frustration for both you and your students.
Anticipate as many needs as you can... and make arrangements for them. The more thinking you do in advance, the less apologizing you will do during and after the class.
Recruit enough helpers. If the group is over 5 people, you'll need assistants who can help each participant individually with their projects.

Tips

If the materials are costly, have participants either purchase their own supplies or pay for them up front when they register. Not enough materials is a major frustration and time waster.
It is better to have too many supplies left over than not enough. If you must err, err on the generous side.

Related wikiHows

Article provided by wikiHow, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Give a Craft Workshop. All content on wikiHow can be shared under a Creative Commons license.

HOT OFFER!

Crafts Making Money | keychains with names | wire name keychain | how to make keychains |

Andy Turner's Own Craft Busines Review

John Wirename Necklace

Wirename Writing And How To Make It A Profitable Business

Wirename Writing Tips for running a business with your new found name making skill

Custom Keychain with Colour: Practical and Classy, But Cheap!

Custom Keychain for Sale

FREE WireName Tutorials

Contact Me

Wire Jewelry Step by Step : Mother

Wire Jewelry Step by Step : Beth

Wire Jewelry Step by Step: Amy (Pendant)

Teen Gift Idea To Bring Delight To The Hard To Please

About Me

My Wedding Fund

Our Personalized Wirename Keychain Official Facebook Fan Page

Testimonials

Wire Name Heart Pendant

How To Turn Scrap Fabrics into a Potholder ? Creative Handicraft

Holiday Crafts: Thanksgiving Day ornamentations children can create

Keychains with names

Google forms Partnership to help SMEs

Selling homemade crafts online

Why Do We Need To Consider Selling Crafts Online?

Wire Writing Secret:- Small Investment Big Return

"Have You Ever Wondered How Much More Enjoyable Your Life Could Be if You Started Your Very Own Craft Business from the Comfort of Your House?"

how to make keychains; a side income opportunity

What has this blog got to do with New Zealand Natural?

Ever had ice cream in a fridge? Well, I stuffed myself into one... in hope I could win TO HAVE MORE! Help click 'like' on the picture! :)

How to Give a Craft Workshop?

How to Give a Craft Workshop

Steps

Tips

Related wikiHows

"Have
You Ever Wondered How Much More Enjoyable Your Life Could Be if You
Started Your Very Own Craft Business from the Comfort of Your
House?"