Theory of Science

Are you confused about Notebook Batteries, Installed or Released?

noreply@blogger.com (windy) — Tue, 27 Sep 2011 21:35:00 +0000

     If you're using the power adapter, which one is better, notebook batteries removed or installed? Often times, even many times this question is questionable to me. Before I give you tips, it is advisable to know about the battery.
     Today most outstanding notebook uses lithium ion batteries are lighter than the previously used NiCAD. Lithium ion batteries are used sekang is easier to maintain because you do not need to wait up to perform a new recharge to re-fill it again. Thus, in circumstances not depleted nor forbidden to perform recharging. However, keep in mind, lithium ion batteries can not be stored for long periods with no wear at all. These batteries will be damaged because the compound will dry batteries.
     So how good is that? I will try to provide easy tips to longer battery life. You do not need to fear the battery on the notebook will be damaged by continuous adapter attached. The adapter is provided in the sales package will decide the electric current when the battery is full. So, you need not fear the battery will over-charge. It is better you get used to two or three days once the battery by using battery power only when in use and when the low battery warning appears, you just attach the adapter back. If you're someone who frequently use the notebook outdoors then you unconsciously do this repeatedly.
     This is exactly the same as the habits of many mobile phone users. By the time you rest blank or more nights, you'll charge the battery. One thing to remember, also has a battery life, so the battery will decrease gradually over time.

Should I remove the battery when A/C is plugged in?

Many laptop users have this question and we will answer it right now: The answer is: YES and NO, it depends on the situation. Having a battery fully charged and the laptop plugged in is not harmful, because as soon as the charge level reaches 100% the battery stops receiving charging energy and this energy is bypassed directly to the power supply system of the laptop. However there's a disadvantage in keeping the battery in its socket when the laptop is plugged in, but only if it's currently suffering from excessive heating caused by the laptop hardware.
So:

In a normal usage, if the laptop doesn't get too hot (CPU and Hard Disk around 40ºC to 50ºC) the battery should remain in the laptop socket;
In an intensive usage which leads to a large amount of heat produced (i.e. Games, temperatures above 60ºC) the battery should be removed from the socket in order to prevent unwanted heating.

The heat, among the fact that it has 100% of charge, is the great enemy of the lithium battery and not the plug, as many might think so.

Microsoft Fix IT to extend the battery life of laptop batteries and improve battery consumption

     Laptops or netbooks used for hours on battery constraints. To help users laptops or netbooks in fixing problems related to power consumption and extend battery life, now Microsoft has released software that automatically detects system settings that may affect the use of electrical power, such as setting time-out and sleep, display settings, and screensavers , and restore it to original settings (the default).
Microsoft Fix it helps extend battery fix laptop or netbook with the following five factors:

     Period of time before the computer goes to sleep mode is set too long.
     The use of a computer screen saver is not set to enter sleep mode.
     Brightness is set too high.
     Power management settings are not set correctly.
     Wireless adapter is not optimized for power savings.

Is Daydreaming Can Eliminate Memory??

noreply@blogger.com (windy) — Tue, 27 Sep 2011 04:00:00 +0000

Every person must have been daydreaming and fantasizing about the future or something that is beautiful. Do mostly because daydreaming daydreaming can make people lose some of its memory. Have you ever had difficulty remembering events before you daydream? If so, then it is normal. Recent research found that while daydreaming or mind to pensive everywhere, can cause partial loss of memory, especially memory before one starts to daydream. The farther your mind drift while daydreaming, it will be more severe memory loss. Previous research also found that thinking about something else, either daydreaming or mind wandering (mind-wandering), can block access to the memory or the memory of the past. In the new study, scientists investigated several participants. Participants were divided into two groups. The first group was asked to see the list of words that appear on a computer screen, one by one. Then participants were asked to daydreaming, thinking about events that interest him. Furthermore, both groups of participants were only asked to see a list of words, without daydreaming. At the end of the test, both groups of participants were asked to recall as many words what he saw from the list. The result, the group asked for a little daydreaming bind only words as compared with the group who did not daydream. This suggests that daydreaming can eliminate most of the newly acquired memory. This study has been published in Psychological Science, a journal of the Association for Psychological Science. "Daydreaming can make you feel in different situations, because you can not remember events that happened before you daydream," said Peter F. Delaney of the University of North Carolina at Greensboro, as reported from Psychcentral

Big News & you must know about Doomsday Year 2012 is PROPAGANDA! Do not be fooled!

noreply@blogger.com (windy) — Fri, 23 Sep 2011 12:00:00 +0000

Do you know Year 2012 is the Doomsday propaganda to establish a new world order? Currently, many issues are spread on the internet about the apocalypse in 2012. Because prophecy is why, among others, from:

1. Nostradamus : "A big object heading to our planet, it will reach by 2012 but it wont hit us"

2. Alber Einstein : "Be careful about Pole Shift to the earth that can suffer people alot."

3. The Maya: Predicting human life begins from 0.0.0.0.0 ie on August 11 3114 BC and ends on 13.0.0.0.0 of December 21, 2012.

But this is not the end of the world who discussed .But the grand plan behind the issue .ESTABLISHMENT OF A NEW WORLD ORDER !!

WHAT'S NEW WORLD ORDER??

The term New World Order (NWO) has been used by many politicians throughout the ages, and is a generic term used to refer to a global conspiracy conducted by a group of very powerful and influential a category including the rich world, political leaders, corporate elite , as well as members of a group called Black Nobility of Europe (dominated by the British Crown) which aims to create a world with one government (fascist) are independent of the existence of national and regional borders. (source: http://www.threeworldwars.com/new-world-order.htm). In essence they want to rule the world.

Novus Ordo Seclorum: New World Order

WHAT'S ILUMINATI / FREEMASON??

Illuminati secret society was formed around the year 1776 by a number of family / dynastic nobility of Europe, their dream is to control the world through the dream of "New World Order". They control the world economy, governments through agencies and billionaire, often makes financial-economic crisis and war (including WWI, WWII, Vietnam, Iraq, etc..) To reap the benefits and control as well as post-disaster.

Illuminati is still in power until now, they work in secret by the government (especially the U.S., Israel), large corporations, mass media (FOX NEWS, CNN, etc), Intelligence Agency (CIA), National Politics (UN), and Technology Agency and Science (NASA).

This symbol freemason .. This symbol on a dollar U.S.

The letters are collected when the line is drawn, is ASMON. This is the anagram. ASMON can be ..... MASON! As we know, Mason is a short phrase of Freemason organizations, which said the conspiracy involved a variety of high rank and have successfully changed the face of our world today. Other symbols in the bodies by their condominium ...

and many more......

NOW WHAT Relation Between 2012 Doomsday?

In the new year 2007, Leo Zagami, 36, delivered a very important message for us all. Illuminati plan to do Nazifikasi Western countries in 2012 and will punish all believers, on the pretext of the war against terror and will destroy the world economy. Leo Zagami, a descendant of the Illuminati, in June last year to convert, and chose Islam as his new religion. Then he determined to take the fight against the Illuminati. While still a member of the Illuminati families, he has a lot of experience attending various ceremonies terrifying demons, black magic rites (evil magic), control the mind (mind control) and torture committed within the lodge closed. On Saturday he maintains a list of names of members of high-level Freemasonry Illuminati Confessions on its Web site, they expressed readiness to fight against the satanic Illuminati. In addition to strict safeguards, Zagami also provide a personal telephone number to answer important questions about the sincerity to do so. Zagami explains that now is the end times, and it does not mess around, he said, It was delivered on January 3, 2007 in an interview on its website.

Keep in mind that there will be changes in the cosmic position on December 21, 2012, where it leaves us 6 years to prepare ourselves so that time should dipersiapan each of us, then they rose up against the Illuminati and defend our rights under the patronage of the Lord the Almighty before the Illuminati taking control and start persecuting believers. Prepare your weapons to defend our faith will be destroyed or perish. This is a war against Satan, so, O people of Western hemisphere, (East also dong) realize, or you will wake up from nightmare in the morning in December 2012.

Starting in 2010 you'll start to feel the atmosphere change massively, but in 2012 you will see clearly the end of this civilization with our own eyes will be total NAZIFIKASI Western countries in 2010, before economic conditions occur very adverse consequences will be felt every one. Then social tension will be heightened to the level that has never happened before, and eventually became an internal conflict in 2012, the Civil War.

Sources:
Code: http://akhirzaman.info/index.php?option=com_content&view=category&id=105:pembelot-illuminati-leo-zagami&Itemid=62&layout=default

So . Issues likely Doomsday Year 2012 is propaganda created by those who deliberately (Illuminati / freemason, et al).
Why?
So that we all fear. Because if people fear and panic, they will be easier to control . They utilize the mass media they control to condition our minds that the Year 2012 will end. Even they use the space agency: NASA to support this theory . (NASA is also controlled by them) NASA 2012 Calculations for a Big Disaster on Earth!

http://science.nasa.gov/headlines/y2006/10mar_stormwarning.htm

WHAT THEY MAY DO IN 2012?

They are the Illuminati used to perform satanic rituals or ceremonies. So do not be surprised if they can communicate with the Jinn (demons). They have planned a great event for the formation of the New World Order. They and Satan (Jinn) will work together to do this plan ...

Is the plan?

To find out, we must answer this question:

How can so that this earth can unite under one umbrella of government?

It must be hard right?

Because we are all separated by many differences: race, nationalism, ethnicity, etc.

How do I order to unite the whole country under one government? (Clue: Watch the movie Independence Day!)
Have a answer? Yes! By making the earth invaded by aliens!

That way they will sent all the nations united under his rule to fight the alien is . eventually formed the NEW WORLD ORDER . (remember how the story in the movie independence day, when the whole world united against the alien under the leadership of the United States. Then how do they do that?

1.With the help of the Jinn and his friends ..( They are Alien). Spoiler for Jinn, according to Islam: Jin is a delicate creature who can change shape.

* Surah ar-rahman: ayat

"And Allah created the jinn from fire"

* Surah al-A'raf: ayat 27

"... in fact he and his tribe see you, from something where you can not see them ..."

They became sebahagian dwellers on the earth together with humans.

* Glossary:
o Word Single: Jinni
o Plural: jannun / jinnatun

Muslims acknowledge the existence of jinns and believe that God sent Prophet Muhammad to them. According to Imam al-Ash'ari in the book Maqalat Ahlus Sunnah Wal-Jama'ah, the genie can penetrate into the human

* Surah al-Baqarah: ayat 275

"People who eat (taking usury can not stand but sperti stands one whom Satan possessed because (pressure) madness ..."

Even though so, there sesetengah people often cooperate with the genie in terms of making amulets or charms, although contrary to the faith and lead to idolatry. (Source: http://wapedia.mobi/ms/Jin).

2. American military technology with concealed ... (his UFO). Spoiler for military or UFO........

3. By THE MEDIA PROPAGANDA! (This is the most dangerous). Spoiler for Do not Believe the.....

Why can not believe it?? due largely controlled by those who support the agenda of the establishment of the New World Order! Just try your own research, who would have the institutions above!?
All media condominium they will make a variety of propaganda to convince us that 1). UFO's exist .. 2). in 2012 will occur doom ..So be careful if you watch TV......(note: oddly enough film producer and Independence Day 2012 is the same person. coincidence?) may believe, not believe it is also up to you.

For more information go to "The Arrivals" on youtube or on www.wakeupproject.com.

The Mayan Elders: The 2012 Not Doomsday.

An elder of the Mayan, Apolinario Chile Pixtun frequently given a barrage of questions about 'Apocalypse 2012 "where, according to the Mayan calendar the world will end on 21/12/2012. However, he firmly rejected the statement. Press Association issued a proclamation on Tuesday (13/10) reported, the elders of the Maya is feeling frustrated with the statement. All the more by going to the emergence of films made in Hollywood "2012" which describes a variety of disasters including major earthquakes struck the Earth, meteors and tsunamis.

Chile Pixtun the descendants of the Maya of Guatemala asserts, a number of theories related to events in 2012 it is a statement that made the West itself and not from the Mayans. He confirmed that according to the Maya, the calculation of the calendar will end on 21/12/2012. However, it is not the end of everything. A similar tone leveled Huchim Jose, Yucatan Maya archaeologist, "When I went to some Mayan communities and asked them what would happen in 2012, they did not know. Then, when I declare that the world would end. They do not believe it. "

Maya civilization recorded from the year 300 AD to 900 AD has a remarkable ability to astronomy. Their calendar starts from the year 3114 BC marks the 394-year period known as the Baktun. Number 13 is considered sacred by these tribes and the 13 Baktun ended around December 21, 2012. Also in 3114 BC is also considered an accurate year. Because, on August 13, 3113 BCE (BC) appropriately and accurately described as the beginning of human civilization on earth. Because I recorded Egyptian Dynasty estimated at about 3100 BC, and the first city, Uruk, in Mesopotamia, also established around the year 3100 BC. This figure also coincided with the founding of the kingdom of the Hindu Kali Yuga.

And most interesting is, the division of time into 24 hours of every 60 minutes and each minute into 60 seconds, including one full circle is 360 degrees, is also found to be approximately 3100 BC, the Sumerians.
David Stuart, a specialist in Mayan epigraphy at the University of Texas said, "On December 21, 2012 is a commemoration of special creation. The Mayans never said the world would end at that time. They also do not say bad things or a disaster that would happen on that day . They only record the memorial monument Six.

whether humans can drill down to the earth's core?? may be yes or may be no??

noreply@blogger.com (windy) — Thu, 22 Sep 2011 20:00:00 +0000

Of course not easy to answer that question. Now, it seems unlikely humans could drill the earth until translucent. Whether in the future, humans may find more advanced technology in the field of drilling. What is clear, throughout the globe has a diameter of 12,756 kilometers, or more than 12 million meters. So, if people want to drill the earth until translucent, long drill bit required more than 12 million meters. Wow ..., very long....

In addition, the temperature at the earth's core is very hot. Earth's core consists of thick nickel freezing temperatures reach 1370 km and 4000 0C. Wow, very hot, huh? What tools did not drill melts at temperatures as high as that?

Drilling Deepest

Earth consists of four distinct layers. The geologists claim, since the Earth cooled 4.6 billion years ago, the heavy material "sinks", while the lighter materials emerge to the surface. Therefore, the skin layer is made of the earth is made of lightweight materials such as granite. While parts of the earth contain heavy metals such as nickel and iron. The skin of the earth is the place we live. Beneath it is a mantle (coat), a pasta-shaped material such as porridge. Earth's core is very hot and has a very high pressure. The human body will be destroyed like cakes when it comes to the center of the earth's core due to very high pressures.

Humans do the drilling of the earth for various reasons. For the study, searching for oil, water, or other purposes. Humans have managed to examine the layers of the earth, but the core is still a mystery. Petroleum drilling is usually "not in". At a depth of 6,000 meters, oil was discovered. Deepest drilling ever undertaken by man is in the Peninsula city, Russia. Drilling was started in 1970 and reached a depth of 12,262 meters in 1994. Drilling technique is not by turning the drill bit, but pressed a bit by bit, taking out the mud.

The purpose of drilling Kola Peninsula is 15 thousand feet. But to no avail. At that depth, can reach temperatures reaching 300 degrees Celsius or even higher. Too hot to operate a drill in there. Another drilling deep enough to do in the Caspian sea. Reach a depth nearly as deep in the Kola Peninsula. In addition, there is drilling for research in the Bertha Rogers, Oklahoma, Texas with a depth of 9583 meters. On drilling in the Peninsula, was not found oil or natural sources. But the scientists succeeded in studying the arrangement of layers of earth, including plate associated with the earthquake as well as physical and chemical composition of the earth's core. Humans do not always drilling from onshore. Humans also do the drilling at sea. Able to drill in the ocean menririkan base, commonly called the rig. Can also be drilled through the ship, like a ship "JOIDES Resolution". Ship JOIDES Resolution has seven floors, belongs to the Joint Oceanographic Institute engaged in scientific research.

Well, humans have been able to drill into the earth as deep as more than 12 thousand meters. Though the earth's diameter reaches 12 million meters. So, just one more than a thousand. Could humans one day be drilled to penetrate the earth?

My menu Recipe Chicken Sate Lilit

noreply@blogger.com (windy) — Wed, 21 Sep 2011 03:15:00 +0000

Seasoning that are:

     Curly red chili 3 pieces
     Red onion 3 eggs
     2 cloves garlic
     1 whole roasted hazelnut
     turmeric 1cm burned
     coriander 1/4sdt
     grilled shrimp paste on 1/2sdt

Materials to make chicken sate lilit:

     minced chicken 200gram
     minced shrimp 100gram
     2 stalks chives cut in 1 / 2 cm
     granulated sugar 1 / 2 tsp
     salt 1 / 2 tsp
     thick coconut milk 1 tablespoon instant
     oil for sauteing
     lemongrass to use as a puncture

How to make chicken sate lilit:

     Blend all the spices.
     heat oil and saute all the ground spices until fragrant. lift
     Combine all ingredients wrap chicken satay, stir spices added.
     take a little bit and then the chicken mixture in the form of pins and solid lemongrass.
     Burn her at the back and forth until cooked and fragrant.

If you interest, you can try to make it. iam sure it is very delicius.hmmmm yuummiii....^_^

you must be careful with eye pain medications..why??

noreply@blogger.com (windy) — Tue, 20 Sep 2011 02:55:00 +0000

Red eyes, irritation, and itch caused by pollution and too long facing the screen notebooks.

Usually the steps we are taking the drug immediately and use eye pain, without thinking. Yes, we often assume "that hurt the eyes so wear eye pain medications let the eye heal faster and not contagious". Indeed, this opinion is justified, who also want to linger "colonized" by eye pain, right. However, actions that directly use the drug eye pain away without thinking first is considered to be very careless actions.Why is that?

    Some cases have found that a person became blind after using the drug eye pain which turned out to have expired. Other cases are also calling for similar things, that the eye pain is getting worse because the eye pain medication that is used packaging has been damaged and contaminated by bacteria in the air.
    This is the reality that people rarely notice. Maybe things are considered trivial, but the result turned out to be fatal if neglected, could even be blind.
    We know that the eye pain drug packaging must not be allowed to linger in the air when we have ever used. Did we ever pay attention to expiration dates when purchasing medications sore eyes though we buy at the supermarket or drugstore quality. Little things like that in fact rarely noticed.Wanted to recover, but in fact more severe?

    Eye pain is uncomfortable. Besides disturbing the self must also disturb others. Is certain that if someone is exposed to the eye sore it would be sequestered while the neighborhood for fear of contracting. Even so, the use of indiscriminate eye pain medications can also be fatal.The following are some tips that can be applied before using the drug eye pain, namely:1. Check the expiration date

    This is the most important thing we must do when buying drug eye pain, be it in a large pharmacy, supermarket, especially when the traditional markets. Sometimes, sellers are not sensitive to her goods which have expired. Therefore, as a buyer we must check whether the products we buy have a deadline or not. And we should also choose an eye medicine that is still a long expiry date of the date of purchase.2. Make sure the content contained on the pain medication that eye did not contain substances that make us allergic

    Some people have allergies to certain substances, and of course everyone is not the same. Thus, eye pain medicine brand A good example is not necessarily used by us even if no side effects when used by someone other than us. Therefore, make sure the substances that make us what we should avoid allergy and drug eye pain and whether we buy is already free of substances that we must avoid.3. Should immediately discard disposable

    Drugs must be kept sterile eyes, especially when it is opened. Do not store medicines in the eye let alone a long time until many years. If possible, throw away disposable. Eye drops that are too long are stored after the previous had been used, it is feared could lead to a dangerous eye irritation. Eye pain medications that have long kept usually contaminated with bacteria in the air. Therefore, be careful.

do you know Identify characteristics of abnormal sperm?

noreply@blogger.com (windy) — Mon, 19 Sep 2011 15:30:00 +0000

Identify characteristics of abnormal sperm - How important is the function of sperm in a process of pregnancy. Thus, abnormalities in sperm may lead to disruption of male reproductive function. Many cases occur in men are:
1. Number of Sperm. Fluid released during ejaculation man called semen during intercourse. Normal volume of about 2-5 ml of semen. "The liquid cement is white pearl and distinctive unpleasant smell with a pH of 7-8," said dr. Bowo. Well, the volume of semen is considered abnormally low if less than 1.5 ml. The volume of cement in excess of 5 ml is also considered abnormal.
sperm-count in semen is the number of spermatozoa is the determinant of the success of obtaining offspring. Normal, spermatozoanya number about 20 million / ml. In the case of man found less spermatozoa (oligozoospermia) or no sperm cells are found at all (azoospermia).
Except for sperm cells in semen there are other substances derived from the glands around the reproductive male. Substances that serve the food supply and maintain the quality of spermatozoa that can survive until it snaps into the female reproductive tract.
2. Abnormalities of shape (morphology). Normal sperm is shaped like a tadpole. Consists of head, body, and tail. Abnormalities such as small head or a tail will not affect sperm motility. This of course would complicate the sperm reaching the egg.
3. Weak movement. To reach the egg, sperm must be able to make the long journey. It was a determinant of conception. The number of sperm cells is sufficient, if not accompanied by abnormal movements, making the sperm cells will not reach the egg. In contrast, although few in number but its movement is faster, can reach the egg.
The case of weak sperm motility (asthenozoospermia) is often encountered. Sometimes even dead spermatozoa (necrozoospermia). Movement of spermatozoa were divided into 4 categories: a. Moving fast and straight forward b. Slow and difficult to move straight forward c. Not moving forward (moving in place) d. Not moving.
Sperm is considered normal when a normal movement with a category of greater than or equal to 25% or categories b greater than or equal to 50%.
Normal spermatozoa separated from each other and move according to each direction. In certain circumstances, abnormal spermatozoa clusters, bind to each other, and motionless. "The situation is said to occur agglutination," said Tri Bowo. Agglutination may occur due to an immunological disorder in which an egg cell sperm cell declined.
4. Semen Fluid Too Lumpy. The liquid cement is too viscous resulting in difficulty moving sperm cells. Conception was so difficult because sperm cells can not successfully reach the egg. In the normal case, when ejaculation, semen in the form of a thick will melt (liquifaksi) between 15-60 minutes.
5. Clogged channels. At ejaculation, sperm exit the testes to the penis through a very fine line. If the channels were blocked, the sperm can not get out. Generally this is caused trauma to the collision. It could also be due to lack of genital hygiene so that nourish the life of a virus or bacteria.
6. Damage to testes. Testis can be damaged due to virus and other infections, such as mumps, gonorrhea, syphilis, and so on. To note, the testes are sperm factories. Thus, health must be maintained. You see, the healthy testicle will produce both sperm quality and quantity.
The testes are very sensitive. It was easy to be influenced by outside factors. If the testicle is compromised, sperm production could be disrupted. Maybe when exposed, he still issued a sperm. Only without the sperm cells (azoospermia).

This story about mystery of the moon

noreply@blogger.com (windy) — Mon, 19 Sep 2011 06:18:00 +0000

Months that we usually observe in the night turned out to save a unique mystery that remains questioned by experts. Existence, his age, and even all about the moon to make a picture of the moon itself to be a mystery to the inhabitants of the earth.

Dr. Robin Brett of NASA has said that, "it seems easier to explain why the moon does not exist than why there is the moon."

Age of the Months

One of the most confusing of the month is his age. Almost all of the moon rocks brought to Earth to observe it has a 90% age older than the oldest Earth rocks though. Until now the world's oldest rocks ever found is 3.7 billion years old, while the moon rocks were aged between 4.3 and 5.3 billion years old. Research on this month and make the knees of his admirers kreasonis theory (theory creation of the earth) was shaking. In the bible itself noted that the moon was created on the fourth day, and any found should be the experts out there on the moon would say that at least a month younger than the Earth. If in the next few decades no longer found the older rocks of the earth, then chances are the facts about the moon will begin to make fun of fans kreasonis theory.

Hollow of the Moon

When will leave the moon in a moon landing mission, Apollo 12 aircraft catapult aircraft back to the moon landing, and from what is recorded by earthquake recording machines are installed in the month, there was an earthquake that lasted for more than 15 minutes within a radius of 72km and issued a buzz . Similarly, when we hit an empty keg with a hard hammer, the barrel will remove noise from vibrations produced. The same thing happened in the month, and this has been proved that the moon was empty.

Missing Dust

If indeed the month of age as the rock which has successfully researched, then there should be a pile of dust that covered the surface is 180 feet thick, but in fact the dust that covered the surface of the moon just 2 inches thick.

Encrusted Metal Elements

The composition of moon rocks was not just any rocks. When experts try to do the drilling on the moon because they were surprised to find the moon's surface is too difficult to penetrate. After investigation, it turns out there is the composition unsor a very hard metal, metallic element that is titanium, the same material used to make spacecraft. Conclusions about the moon is growing, giant, hollow titanium ball.

If you see the crime or bad people on streets you must know. How to Defense your self On Streets

noreply@blogger.com (windy) — Mon, 19 Sep 2011 06:13:00 +0000

A lot of bad people out there who would silence those who tried to stop their evil plans. To that end, we kepinteran and genius will not work when we are face to face with evil people, especially in the streets.This is where the knowledge we need to keep ourselves to be ready when an emergency situation, particularly in the fight empty handed. Below are some principles that we have to remember in practical martial arts, among others:

• There are no rules. This is not a friendly game in the arena who uphold sportsmanship. There are no rules for anyone who involve themselves in it. Your attacker will not be a headache thinking about the rules, and you should forget all the rules.

• You do not need to think about the fate of the opponent. People who attack you suddenly in the street would not think about your safety. Therefore, I suggest you put aside all the aspects of morality for a moment and prioritize personal safety above all else. After all, there's no guarantee you'll only be attacked by one person.

• Avoid rough time. Wrestling Royce Gracie at UFC style had always seemed cool, but it should not be used. Will be a big problem if you struggle with your opponent tightly, while she kept a knife in his pocket. If he had won his pocket, was finished already. In addition, wrestled with one person would be very dangerous if your opponent a lot. While you wrestle with that one, there came another. His name is also a criminal, certainly not sporty!

• Do not be intimidated. Do not be influenced by a thundering voice, his words are dirty, ugly face, or her body full of tattoos. You must remember that people who feel the need to intimidate other people are human beings who have fear in him. If he has great strength, for example, could crush the banyan tree, then he will not feel the need to intimidate opponents. Centile were once enemies flying.

• Condition yourself. Do not have doubts. Realize that there is no choice but to fight. If you are still hesitant to fight, then do not do it! Resist if you are unsure. If not sure, positively sure it myself first!

• Be prepared for anything. His name is also a criminal, they are already accustomed to living cheating. You should not think that they would come with his bare hands just because you have no weapons. You also should think the way they are. Then suddenly there was a crowbar across the near leg, why should prestige? Take and use!

• Aware of the place. Do not be pressured. If it crowded where you stand, do not be cornered into a quiet place. There is no harm in calling for help so that criminals arrested busy-busy. Consider the situation around. Are there any that can be exploited for the sake of personal safety? If you believe you can conquer them if one on one, it never hurts to run into a narrow alley. If there was a dark dangerous place but you've memorized by heart, it never hurts to run down there and clean up your opponents. The whole of nature can be used as a weapon. Do not hesitate to push the opponent to fall into the abyss!

• dangerous points. You do not have fatigue-pitted tired muscles with an opponent. If the opponent a lot, then you need to save energy. Attack hazardous areas only. Eyes, genitals and knee are three important points that you should remember well. One strong attack to one of the three points that can guarantee victory.The following are tips on practical self defense that I can share. Perhaps these tips below seem cruel, but this is what the actual situation on the streets.

• Perspective. Eyes should not be focused on one part of the opponent's body. Eyes should be able to see the whole body of the opponent by the shoulders as the focal point (though still not focused 100% on the shoulder). Looking at the shoulder there is no benefit to guessing attack the opponent, because usually the shoulder will move first before the attack, unless he is a martial arts expert who is trained. If your eyes are focused on hands, then you will not be able to watch her feet, and vice versa. The whole movement of the opponent must be visible. This can be trained, even if the opponent amounted to more than one person.

• Face your opponent. Yes, most of the thugs was ugly. But do not look at his face, because that attack is the hands and feet, not his face. Stop staring at his face. If he thrust his face, then immediately take the opportunity to injure his eye.

• Emotions. Do not be too believe in the myth of Dragon Ball. Man who run amok will not get stronger. The attacks would be more awesome. If your opponent is only one, it's good to provoke the opponent, such as by spit in his face or back cursing. There is nothing wrong, it's just a psy-war. Having hooked his emotions, his movements will be haphazard and hard to control.

• Earrings and ear. If the opponent was wearing earrings, especially large size, so be thankful! Opponents of this kind easily dealt with if we know how. Simply pull the earring off, it is guaranteed he will be covered in blood and pain. There would be fatal to obliterate his life, but most likely he will be too ill to continue the fight. Who ordered to be criminals? Anyway, if there is no earrings, ears can be torn if pulled too hard. Why not?

• The wall or ditch. If you are behind a wall or ditch, it is better to use it for banging your head or throw the opponent to fall. When he attacks, take advantage of momentum!

• Knee and genitals. Use the kick only to attack these two points alone. If you kick too high, your opponent will be easily deflected. Conversely, if you kick into the lower part, usually untrained thugs martial will not have time to defend themselves. If opponents do high kicks, tangkislah by hand while attacking the genitals or legs that are based on the ground.

• Top-down. Eyes on top, below the knees and genitals. Do assault hoax by alternating between upper and lower attacks. Usually not a martial arts expert thugs. If we pretend to be attacking in the direction of his head, at best he will prepare a double cover of like a boxer. Well, that's a good time to attack the knees or the genitals! Likewise, if you do a trick attack toward the knee, and opponents greeted by lowering his hands, you should not hesitate to attack the opponent's eyes or ears.

• Bone dry. Do not be too afraid of the opponent who likes to kick. If he spit kick, approach a little and knock his shins with your elbow or arm muscles. Most likely he would moan in pain.

• Distance. If your distance from the opponent's tight enough, then it would be unwise to impose punching and kicking. Use with elbow and knee attacks. May use a little bit further blow, while longer distances longer requires you to use a kick technique. A suitable distance for the kick should not be used to attack with the elbow, and vice versa.

• Adjust to the situation. Do not expect to happen under ideal conditions. You have to adjust to the situation, not a situation that adjust to you. Do what you deem necessary to save themselves. Remember, any legitimate in order to save themselves. Whatever!

If your opponent is more than one person or they use a firearm, then try to escape by taking advantage of the current environment.

Do you think the sharpest sword in the world is katana?you are wrong, the sharpest sword in the world is Damascus sword.

noreply@blogger.com (windy) — Sun, 18 Sep 2011 14:42:00 +0000

People will think if a lot of the sharpest sword in the world is the samurai of Japan, you're wrong turns eiits sharpest sword is the sword of Damascus (Damascus Sword) ..
The following is a little explanation:

Damascus swords are very strong but still flexible so that the tip of his sword can be bent to the handle of a sword. It is also very sharp sword that can cut european swords with ease, even said to be able to cut a piece of silk that was dropped to the ground. Typical characteristics are the Sword of Damascus Pattern / Pattern Watermark surface, similar to the Indonesian Keris / Japanese Sword (But Watermark on Damascus steel was not because of technical metal folds).

Research conducted by a group of scientists from the University of Dresden, reveals an extraordinary secret-the presence of carbon nanotubes. Apparently without realizing it, the maker of this sword uses nano technology when forging a sword. Unfortunately, the technique of making this sword disappeared in the 18th century.

in below is the picture of damascus sword anddamascus knife:

Nanotechnology includes the development of technology in the nanometer scale, usually 0.1 to 100 nm (nanometer equals one thousandth of a micrometer or one millionth of a millimeter). The term is sometimes applied to very small technology. Also very broad in scope, can be extended to various fields such as medicine, robotics, physics, etc.. While carbon nanotubes are cylindrical carbon bond with a diameter of 4 nanometers (1 nano = 1/1.000.000.000).

Material used is called wootz steel, rich in carbon nanotubes. Materials are said to be imported from India, and Damascus sword making halted due to expiration of this material.

Legendary Damascus steel is a steel material having superplastic properties (the ability to experience permanent deformation without cracking up to 1000%).

With the unique nature of this then Damascus steel is widely used as material for making swords and guns. According to the myth that guns are made using Damascus Steel will never dull or broken. Besides having superplastic properties of Damascus steel also has a pattern that is characteristic of water (watermark) on their surface.

Damascus steel was first made in India and then expand to Syria. Damascus own name given by Western nations involved Crusades and find a weapon made from Damascus steel in the city of Damascus, Syria.

Damascus sword once used by the Muslim leader Salahuddin al-Ayyubi the Third Crusade against the Christian army led Richard the Lion Be .. Both leaders
mutual respect. The two leaders who later became a legend, who want to see please watch the movie Kingdom of Heaven (2005)

Do you understand about RECLOSER ( PBO)??

noreply@blogger.com (windy) — Sat, 17 Sep 2011 05:46:00 +0000

COVER BEHIND THE AUTOMATIC (PBO) and RECLOSING RELAY
PBO (recloser) is the power breaker (PMT) equipped with control devices and reclosing relay Reclosing relay is relays that can detect the flow disturbances and ordered PMT open (trip) and shut down again.

The fuction of reclosing relay / PBO PBO hook up to medium voltage air channels mounted on a frequent disorder phase short circuit to ground which is temporary in nature, serves to: • Normalize back medium voltage air channels or minimize disruption caused by temporary outages remain. • Security section in order to limit medium voltage air channels / localize the affected area.

Type of Reclosing relay Based on the type of reclosing command to the PMT can be classified into two types of reclosing relays, namely: • Single-shot Reclosing Relay :Relay can only give orders to the PMT reclosing time and the new one can perform reclosing after blocking the last time, If there is interference with the blocking period of time, PMT trip and can not reclose again (lock - out).

picture 1: PBO relay with a time Reclose

• Multi Shot Reclosing Relay.
o This relay can give orders to the PMT reclosing more than once. Dead time between reclosing can be set the same or different .
o If an interruption occurs, the relay OCR / GFR trip gave orders to the PMT at the same time also mengarjakan (mengenergize) Reclosing relay. o After the dead time t 1 is very short (less than 0.6 seconds), reclose relay orders to the PMT.
o If the interference persists, the PMT will return trip and reclosing relays will perform the second reclose after the dead time t 2 which is quite long (between 15-60 seconds).
o If the interference persists, then the PMT would return trip and reclosing relays will perform the third reclose after the dead time t 3.
o If the interference is still present in the blocking period tB 3, the PMT will trip and lock out.
o The use of multi-shot reclosing should doisesuaikan with a duty cycle (duty cycle) of the PMT.

picture 2: Diagram of Multi-Shot Reclosing work time Relay

Characteristic Reclosing Relay

• Fast tripping : to anticipate a temporary interruption.

• Delayed tripping : to coordinate with downstream safety.

• When the disturbance was quickly lost in the PBO operation will reset back to its initial state. If an interruption occurs after the reset, PBO start counting from the beginning.

• Repetitive: research recloser automatically after success. • Non-repetitive: it requires manual reset (in case of permanent impairment and if the disturbance had been released). • PBO or overcurrent relays Recloser is so characteristic of PBO and OCR is the same (see the characteristics of the OCR).

Eat egg?? do you know advantage and disadvantagee from egg

noreply@blogger.com (windy) — Sat, 11 Jun 2011 18:35:00 +0000

we all know, most of the people in the world like egg. Now we must know positive and negative effects from egg.
Positve effects:

Eggs good for the eyes. According to one study, an egg a day may prevent macular degeneration (a part of the retina that allows the eye to see fine details in the central visual field) because it contains carotenoids, especially lutein and zeaxanthin. These two nutrients are more easily obtained in eggs than from other sources.

In another study, scientists found that those who get the daily intake of eggs suffered lower risk of cataracts. It is also because the content of carotenoids in eggs.

A single egg contains 6 grams of high quality protein and 9 essential amino acids.

Based on research at Harvard School of Public Health, there was no significant relationship between egg consumption and heart disease. In fact, according to studies, regular egg consumption may help prevent blood clots, strokes and heart attacks.

Egg is rich with elements of choline, which is an essential nutrient for the brain, nervous tissue and cardiovascular system. An egg yolk contains about 300 micrograms of choline.

Eggs contain good fats for the body. A single egg contains only 5 grams of fat and of which only 1.5 grams of saturated fat.
As opposed to all previous understanding, recent research states, normal consumption of eggs does not affect cholesterol levels. In fact, recent studies indicate that regular consumption of two eggs a day does not affect one's lipid profile and may actually fix it. Research shows that it is precisely jenuhlah fat that increases cholesterol.

Eggs are the only foods that naturally contain vitamin D.

Eggs can prevent breast cancer. One study states, women who consumed at least 6 eggs a week, lowers the risk of breast cancer by 44%.

Healthy eggs to hair and nail, because the high sulfur content as well as vitamins and minerals in it. Many people find that their hair grows faster when put eggs in their diet list, especially if their previous intake of sulfur deficiency or B12 in their food.

Negative effects:
Be carefull for men who eat the egg
Eating eggs is one habit that many men or women elected in meeting protein needs.

But if done to excess consumption of eggs will probably arise any unfavorable effects on health. Sebuan latest research reports in the United States for example, indicate a link between egg consumption and risk of death, especially in men.

Researchers from Harvard Medical School, as reported by Reuters Health, stated that men in middle age who ate seven or more eggs a week have a greater risk of premature death. Even this risk is more serious in men with diabetes. Diabetic men who ate the eggs, regardless of amount, are at increased risk of death based on research over a period of 20 years.

Research published in the American Journal of Clinical Nutrition adds to other evidence of how the consumption of these eggs are often contradictory and invite debate. In addition, it is still a big question for researchers is how exactly this can affect egg mortality risk.

Dr Luc Djousse and Dr J. Michael Gaziano of Brigham and Women's Hospital and Harvard Medical School reveals that men who do not have diabetes can actually eat eggs up to six eggs a week with no additional risk to health.

¨ While egg consumption to six eggs a week was not associated with the risk of death, but the consumption of seven or more eggs had something to do with the addition of a 23 percent risk of death. However, among male physicians with diabetes, egg consumption is associated with greater risk. There is also suggestive evidence that consumption of eggs increases the risk of heart attack and stroke, ° bright researchers who hope for further research were even larger.

Eggs long as it's known as rich in cholesterol content, which if high levels can cause blockage of blood vessels and increases the risk of heart attack and stroke.

One nutrition expert, Dr. Robert Eckel of the University of Colorado who is also former president of the American Heart Association, recommend that middle-aged men should have more considering how many eggs they eat.

Research 20 years
In his research, a team from Harvard involving 21,327 men. Participants make regular visits to the doctor since 1981 and reported their condition as well as any related habits
health and lifestyle.

During monitoring of 20 years, 1,550 men suffered heart attacks recorded, 1342 had a stroke and 5,000 more died.

¨ Egg consumption was not associated with heart attacks and strokes, ° note the researchers.

But the men who ate seven or more eggs a week were 23 percent have a tendency to die during the study period.

Diabetic men who ate eggs tendency doubled died during the study period. Men who ate the most eggs recorded during the study were older, fatter and eat more vegetables, but little to eat cereal as breakfast. They tend to like drinking alcohol, smoking and lack of exercise, in which all these factors are believed to influence the incidence of heart attacks and death

How to work Pattern of Medium Voltage Network Configuration?

noreply@blogger.com (windy) — Sat, 11 Jun 2011 09:28:00 +0000

Pattern of Medium Voltage Network Configuration can be sorted into 4 major groups, namely:
1) Pure Radial Configuration
2) Open Loop Configuration (Open Ring) Non-spindle
3) spindle configuration
4) Configuration Spot Network.

In its operation, most systems operate Radial, very rarely a distribution system operates in a loop condition.

Existing systems in East Java Distribution PLN grounding system (high resistance) 500 ohms with a phase to ground fault current maximum of 23 Amperes.
Distribution equipment installed on the network is SSO (automatic section switch) Automatic voltage detection section is equipped with a Fault Indicator (FSI), OCR and DGR relay installed in cell 20 KV sub station / feeder.

There are 2 (two) types of SSO voltage detection is used, namely:
1. Tree Type divided into:
a. Tree Branch.
b. One Line Loop.
c. Two Line Loop.

The use of SSO Tree Type in the network configuration to:
a. Tree Branch used to Radial Interconnection system (automatic) and Loop System One feeder and the Open Loop System Two feeders.
b. One Line Loop is used only at the meeting on feeders Transline Loop System One feeder.
c. Two Line Loop is used only on the Open Loop System Two feeders and placed after the SSO Tree Branch.

Loop Type
Use of Loop Type SSO at the Open Loop System Two feeders, SSO this type mounted on the cusp of feeders with feeder transline transline one another in a single loop.

Setting time SSO Tree Type:
T 1 = time of closing (10 seconds).
T 2 = time to lock (5 seconds).
T 3 = time to open (0.5 seconds).

Setting time SSO Loop:

T 5> Tr + (n +1) T1

T 5 = start time did not feel the voltage regulator box from one side to the Loop SSO entry automatically, setting between 60 - 80 seconds.
T r = time to close behind Reclose-1 (60 sec)
n = number of SSO Tree Type in the feeders (the majority taken from one side of the feeder.

PBO (Reverse Automatic breakers) installed diesel 20 KV substations be set as follows:

- Reclose - 1 = 60 seconds
- Reclose - 2 = 180 seconds

Design Criteria for Medium Voltage Networks

noreply@blogger.com (windy) — Sat, 11 Jun 2011 08:13:00 +0000

Electric Power Distribution Systems for Medium Voltage to be developed is 20 KV Voltage Distribution System using air and or cable conductor medium voltage 20 KV with respect to the density of the load, the level of quality and reliability and customer needs.

Some of the criteria considered are:
1) Criteria for the density of the load
2) Pattern Configuration
3) Correlation Voltage Drop
4) Correlation of losses against the standard network.
5) Development of a New Network
6) Consistency between the network loading of standard loading pattern.

LOAD DENSITY CRITERIA
In designing an Electrical Network, please note the load density in units KVA / KM2, so it can be determined the type and length Conductor Conductor who will supply the load.
Density Criteria expenses include:
1) Lighter loads
Areas / Locations that have a lighter load when there are loads of less than 0.5 MVA per km2.

2) Medium Cost
Area / location that has the burden was when there were loads of between 0.5 to 1 MVA MVA per KM2.

3) Solid Expenses
Areas / Locations that have a solid load when there are loads above 1 MVA per KM2.

How to save gasoline in car

noreply@blogger.com (windy) — Wed, 25 May 2011 15:47:00 +0000

How to save gasoline in your car, the following tips:

1). Avoid heat up the engine too long before driving. During the engine works so the fuel remains unused, so much fuel is wasted in vain.

2). Keep the vehicle speed as much as possible about 70 ~ 80 km / h or below 3000 RPM.

3). Avoid high speeds are not necessary. The higher the speed is comparable to the high engine speed so that the fuel oil that must be sent even greater.

4). Adjust gear acceleration with vehicle speed, use low gear to run the first vehicle.
* Example: Dental 1 Speed 00-20 km / hour
* Dental 2 Speed 20-40 km / hour
* Gigi 3 Speed 40-60 km / hour
* Tooth 4 Speed 60-90 km / hour
* Teeth 5 Speed 90 ~ km / hour

5). Do acceleration / pressure gas pedal slowly (gradually), do not do all of a sudden because it can result in the addition of excess fuel.

6). Avoid excessive load. To carry the load required a big power which means a balanced fuel.

7). Turn off the engine when the vehicle stopped in a long time (parking).

8). Turn on air conditioning (AC) with the temperature not too low. This will make the compressor work not too long (or off if necessary).

9). Do not put your left foot on the clutch pedal when driving or riding with half clutch. This will cause the engine power is not fully channeled to drive the vehicle.

10). Use appropriate fuel octane rating recommended by the manufacturer. Fuel octane rating will determine the complete combustion, so that is very influential on the power generated by the engine.

11). Use tires with flowers and proper air pressure.

Fried Shrimp Butter

noreply@blogger.com (windy) — Wed, 25 May 2011 15:07:00 +0000

Materials :

500 grams of shrimp size
50 grams margarine
7 tablespoons soy sauce
7 tablespoons soy sauce english
2 tablespoons soy sauce
1 / 2 teaspoon pepper powder
2 cloves garlic crushed

How to prepare:

1. Discard the pointed end of the shrimp heads and grumble.
2. Nock back with a knife, remove the black-colored stools.
3. Fry until done with great fire, Remove and set aside.
4. Saute garlic in margarine.
5. Enter the soy sauce, soy sauce and soy sauce english.
6. Dab is fine.
7. After boiling, put fried shrimp.
8. Stir briefly over the fire to absorb flavor. Lift.
9. Serve while hot.

Diet Program With 3 Apples a day. In 12 Sunday, down 8 Kg.

noreply@blogger.com (windy) — Sat, 21 May 2011 06:43:00 +0000

"An apple a day keeps the doctor away",This phrase proved to be correct. Apples are loaded with vitamin C, which served to increase immunity and phenols that can reduce cholesterol. Eating apples may reduce tooth decay because each bite of the apple that you can chew clean teeth and needed the bacteria that cause tooth decay.Another benefit of eating apples is to accelerate the process of weight reduction. A study conducted by Tammi Flynn (a registered dietitian and Group Training instructor at Gold's Gym) in Washington - The United States has proven this fact. Flynn found that her clients are eating an apple (not processed) before meals can reduce weight. Flynn then experimented with 3 apples, he found the results extraordinary. Only in the 12 weeks of her clients lost weight 17 pounds (equivalent to 8 kg).

The following experiments conducted facts Flynn.
The secret behind the benefits that can accelerate the process of weight loss is penurunkan apples provide a sense of satiety after menkonsumsinya. Eating apples provide low carbohydrate intake and reduce saturated fat. In addition to eating three-day apple diet is recommended to include six servings of fruits and other vegetables. This will allow you to reduce your calorie intake without experiencing hunger. Flynn also suggested that eating healthy foods, containing protein and low in fat. Because this can reduce appetite and accelerate weight loss.

Healthy Foods Suggested.
Apple, cottage cheese, low fat, low-fat yogurt, eggs, chicken breast, turkey (there are selling turkey?), lean beef, salmon, oatmeal, brown rice, broccoli, lettuce.

Conclusion:
Eat 3 apples a day of fruit (1 apple before breakfast, an apple before lunch, and an apple before dinner). Dining menu that you will consume must be healthy and low fat.
How, slimming body ready?Source: http://goo.gl/CVZc3

Spiders World's First Vegetarian

noreply@blogger.com (windy) — Thu, 19 May 2011 12:41:00 +0000

Almost all species of spiders are predatory species that prey on other animals, from insects to birds. Among the more than 40,000 species of spiders in the world, a new spider species found is probably the first known to eat plants.

Eight-legged animal that is named Bagheera kiplingi it, living in Central America, especially Mexico and Costa Rica. Vegetarian spider that large body size of a fingernail only adults that prey on acacia leaf tip.

"This is really the first spider known to prey on the plants. He was also the first spider diketahu making plants as main prey," says Christopher Meehan of Villanova University, Pennsylvania, United States who reported the study along with other researchers in the latest edition of the journal Current Biology. He said almost all text books spider nobody ever said there was a spider-eating plants.

In obtaining sufficient food resources he helped guard the role of ants whose lives are also at an acacia tree. The problem with ants which controls acacia, no other herbivores who dare to approach. However, since ants also eat the leaf tip, in addition to nectar, spiders have to do a special strategy.

When hunting prey, the spider must avoid smeut guard by utilizing its web to move up and down. The spider is also building its nest at the base of an old acacia leaves rarely traveled ant.

In addition to prey on the leaf tips, spiders are actually still like the larvae prey on other ants and nectar. When memengsa ant they will pretend to be ants with zig-zag motion.

However, observations made using video recording and chemical analysis showed the spider will still get most of the foods from plants. Populations in Mexico to 90 percent of food from plant tissue and the rest of the ant larvae, nectar, and others. While the population in Costa Rica to obtain 60 percent of food from the leaves of acacia.

What do you kno about History of the ninja in Japan

noreply@blogger.com (windy) — Thu, 19 May 2011 04:29:00 +0000

NINJA in Japanese history was like a shadow,, Shinobi, or Ninja (in Japanese: 忍者, literally, "A person who is engaged in secret") is an assassin trained in the art of ninjutsu (roughly the art of silent movement), Japan.

Ninja, like samurai, abide by their own peculiar rules, called ninpo. According to some observers ninjutsu, the skill of a ninja is not murder but infiltration. Thus, the special expertise of a ninja is to infiltrate with or without sound. Today, the ninja as legends, such as a revered figure, appears in those games and cartoons of children, as well as the genre of martial arts action film.

Ninja usually immediately associated with the figure of a skilled martial, infiltrate and all-round expert mysterious as they appear in the movie or manga. In fact, the appearance of the all black ninja has a point, but if there is a presumption that the ninja is identical to the brutal killer, cold-blooded, trouble makers, carpenters sabotage, not so.

The word ninja is formed from two words namely nin and sha means each of which is hidden and people. So the ninja is a professional spy on the Japanese feudal era. The history of the ninja is also very difficult to track. Info about the existence of their stored meetings in secret documents.Ninja can also be interpreted as the name given to a person who mastered and studied martial arts ninjutsu. Nin means of defense and the jutsu is the art or way. The word is also taken from the word ninja ninpo. Po means the philosophy of life, or in other words ninpo is the highest philosophy of ninjutsu martial arts that became the basis of the life of a ninja. So the ninja will always be vigilant and Integrate the principles ninpo.

Ninja were professional spies in the days when the samurai still holds the highest authority on the Japanese government in the 12th century. In the 14th century increasingly heated battle for power, information about the activities and force the opponent to be important, and the ninja was more active. The ninja summoned by the daimyo to gather information, damaging and destroying the armory or food warehouse, and to lead the invasion forces at night. Therefore, the ninja get special training. Ninja remain active until the Edo period (1600-1868), in which power ultimately be addressed by the government in edo era.

Ninjutsu martial arts movement is only a kick, throw, fractures, and assault. Then, equipped with self-defense techniques such as dings, rolling and auxiliary techniques such as escape, sediment, and other special techniques. However, in practice ninja avoid direct contact with his opponent, thus throwing a variety of tools, manuscripts, shooting, and camouflage is more frequently used. Unlike other martial arts. Ninjutsu teaches techniques of espionage, sabotage, paralyze the opponent, and dropped the opponent mentally. Science is used to protect their ninja family. What did the ninja is hard to understand.

On the one hand have to fight to protect, on the other hand ninja must apply the "cruel and devious behavior" when using the moment to deal with opponents. On the other hand ninpo teachings give clues that one of ninjutsu goal is to enable their sixth sense. Blend of intuition and physical strength in the long term allows the ninja to activate the sixth sense. So get to know others well and understand the various problems in various disciplines.

Design Criteria for Medium Voltage Networks

noreply@blogger.com (windy) — Thu, 05 May 2011 06:00:00 +0000

Inside the Electric Power Distribution System plan it will need a guideline to determine a criterion for the planning of medium voltage overhead line and low voltage. Design This criterion will be a reference in designing a Power Distribution System, ranging from SUTM, Transformers, JTR or SR.
The purpose of the manufacture of Design Criteria is to provide a directional grip in the preparation of system design and standards - standards of construction which will be used as well as distribution network expansion planning to get a high level of distribution efficiency.

Criteria to be used as a benchmark are:
1) The Voltage Drop
2) Magnitude Decrease
3) Cos Phi
4) Loss Load Factor (LLF)

Electric Power Distribution System to be reviewed are:
1) 20 kV Medium Voltage Systems.
2) Distribution Substation.
3) Low Voltage Systems 230/400 Volt.
4) House Connections.

To make the design criteria will be guided by existing SPLN and Conditions - other related provisions.
Electric Power Distribution Systems for Medium Voltage to be developed is 20 KV Voltage Distribution System using air and or cable conductor medium voltage 20 KV with respect to the density of the load, the level of quality and reliability and customer needs.

Some of the criteria considered are:
1) Criteria for the density of the load
2) Pattern Configuration
3) Correlation Voltage Drop
4) Correlation of losses against the standard network.
5) Development of a New Network
6) Consistency between the network loading of standard loading pattern.

Corn

noreply@blogger.com (windy) — Mon, 11 Apr 2011 06:53:00 +0000

$value) { if (strpos($param, 'color_') === 0) { google_append_color($google_ad_url, $param); } else if (strpos($param, 'url') === 0) { $google_scheme = ($GLOBALS['google']['https'] == 'on') ? 'https://' : 'http://'; google_append_url($google_ad_url, $param, $google_scheme . $GLOBALS['google'][$param]); } else { google_append_globals($google_ad_url, $param); } } return $google_ad_url; } $google_ad_handle = @fopen(google_get_ad_url(), 'r'); if ($google_ad_handle) { while (!feof($google_ad_handle)) { echo fread($google_ad_handle, 8192); } fclose($google_ad_handle); } ?>

Corn is one type of food crop seeds from grass family. Derived from the U.S., spread to Asia and Africa through business activities of the Europeans to the Americas. Around the 16th century people Portugal disseminate it to Asia, including Indonesia. Dutch People Mais and the English call it call it corn.

Systematic corn crop is as follows: Kingdom: Plantae (plants) Divisio: Spermatophyta (seed plants) Sub Divisio: Angiospermae (seeds enclosed) Classis: Monocotyledone (dashed one) Order: Graminae (grasses) Familia: Graminaceae Genus: Zea Species: Zea mays L.

Types of corn can be grouped according to age and form of seeds.

a) According to age, divided into 3 groups:

Short-lived (early maturing): 75-90 days, for example: arsenic Dwarf, Dwarf Paper, Abhimanyu and Arjuna.
Aged medium (middle): 90-120 days, for example: C 1 Hybrid, a hybrid CP and CPI 2, Hybrid IPB 4, Pioneer Hybrid 2, Malin, Metro and Pandu.
Long-lived: more than 120 days, for example: White Kania, Bastar, Yellow, Bima and Hope.

b) According to the form of seeds, divided into 7 groups:

Dent Corn
Flint Corn
Sweet Corn
Pop Corn
Flour Corn
Pod Corn
Waxy Corn

High yielding varieties have characteristics: high production, short life, bear attack major diseases and other traits that profitable. This superior variety divided into two, namely: maize hybrids and open pollinated maize varieties. Name some corn varieties are known, among others: Abhimanyu, Arjuna, Bromo, Yellow Bastar, Bima, Dwarf Paper, Hope, New Hope, Hybrid C 1 (Hybrid Cargill 1), Hybrid IPB 4, Kalinga, White Kania, Malin, Metro, Nakul, Pandu, Parikesit, Permadi, Sahadev, Wiyasa, Bogor Composite-2.

Corn crop is very useful for human and animal life. In Indonesia, corn is a commodity second most important food crop after rice. Based on the order of the world's staple food, maize ranks to 3 after wheat and rice. In the Region Madura, corn widely used as a staple food. More recently increasing use of corn plants. Plant a lot of good corn, because almost all parts of the plant canutilized for various purposes including: a) Bars and young leaf: animal feed b) Stem and old leaves (after harvest): green manure or compost c) Stem and leaf dry: firewood d) Bars corn: lanjaran (pillar) e) Trunk corn: pulp (paper material) f) Fruit young maize (putren, Jw): vegetables, bergedel, bakwan, sambal fried

g) The seed is an old corn: rice substitute, marning, foregoing, corn bread, flour, vermicelli, mixture of ground coffee, biscuits, pastries, fodder, raw materials beer industry, pharmaceutical industry, dextrin, adhesive, textile industry.

In Indonesia, the main producing areas of corn crop is Central Java,West Java, East Java, Madura, D.I. Yogyakarta, East Nusa Tenggara, North Sulawesi, South Sulawesi, and Maluku. Special Areas of East Java and Madura, maize cultivation is intensive because the soil conditions and climate is not conducive to growth.

Catfish

noreply@blogger.com (windy) — Mon, 11 Apr 2011 05:24:00 +0000

Catfish is a species of freshwater fish consumption with elongated body and slippery skin. In Indonesia catfish has several names, among Other: prop fish (Padang), fish death (Gayo, Aceh), fish pintet (Kalimantan South), fish rivet (Napier), fish Cepi (Bugis), catfish or leachate (Center Java). Who's in other countries known as the mali (Africa), plamond (Thailand), fish keli (Malaysia), gura Magura (Sri Lanka), ca tre light (Japan).In English is called also catfish, siluroid, mudfish and walking catfish.Catfish were never found in brackish water or salt water. Habitat in the river with a slow flow of water, marshes, ponds, reservoirs, rice fields are flooded.Catfish are noctural, ie active search for food at night days. By day, catfish silence and refuge in places dark. In the wild catfish spawn in the rainy season. Catfish commonly found in Africa and Asia. Grown in Thailand, India, Philippines and Indonesia. Catfish production in Thailand ± 970 kg/100m2/tahun. In India (the acid) produced on average every 7 months reached 1200 kg / ha.

Classification by Hasanuddin Saanin catfish in Djatmika et al (1986) are: Kingdom: Animalia Sub-kingdom: abundant metazoan Phyllum: Chordata Sub-phyllum: Vertebrata Class: Pisces Sub-classes: Teleostei Order: Ostariophysi Sub-order: Siluroidea Family: Clariidae Genus: Clarias

In Indonesia there are 6 (six) species of catfish that can be developed:

1) Clarias batrachus, known as the catfish (Java), fish prop (West Sumatra), fish death (North Sumatra), and fish pintet (South Kalimantan).

2) Clarias teysmani, known as the catfish Flower (West Java), white Kalang (Padang).
3) Clarias melanoderma, known as fish spines (South Sumatra), wais (Central Java), pleat (West Java).
4) Clarias nieuhofi, known as leachate fish (Java), limbat (Sumatra West), kaleh (South Kalimantan).
5) Clarias loiacanthus, known as fish keli (West Sumatra), fish Penang (East Kalimantan).
6) Clarias gariepinus, catfish known as Dumbo (Lele Lamb), King paints fish, originating from Africa.

*Benefit

A) As a food ingredient B) Catfish of type C. batrachus can also be used as a fish ornament and ornamental fish. C) Fish catfish reared in the rice could be useful to combat insect pests of rice in the form of water, because it is one of the food catfish natural. D)Catfish can also be mixed with various other ingredients to treat asthma, menstruation (menstruation) irregular, the nose blood, urinating blood and others.

Switching

noreply@blogger.com (windy) — Sun, 10 Apr 2011 10:28:00 +0000

Modifiers DC-DC power (DC-DC Converter) with the title chopper DC (DC Chopper) is used mainly to supply DC output voltage that varies the amount in accordance with demand on the load. Power input from DC-DC process is derived from the DC power source which typically have a fixed input voltage. Basically, the income of the DC output voltage is to be achieved by regulating the length of time the connection between the output and input side on the same circuit. Components used to perform a liaison function is none other than the transistor. In general there are two functions of the operation of the chopper DC (DC Chopper) that is raising the voltage where the resulting output voltage is higher than the input voltage, and a decrease in voltage where the output voltage is lower than the input voltage.

To better understand the benefits of this type of transition, can be seen the principle of DC-DC power conversion of linear type as shown in Figure 1.


Figure 1 Modifiers linear type.

In the linear type, the output voltage regulation is achieved by adjusting the current in the load depends on the large amount of current on the transistor base: V₀ = I_L . R_L

Thus the linear type, the transistor functions like prisoners who can be changed also quantified as shown in Figure 1. Furthermore, the transistors that are used can only be operated on the linear constraints (linear region) and not exceed the limit cut-off and saturated regions (saturation region). Therefore this type is known as the linear type. Although the linear type is the easiest way to achieve varying output voltage, but less attractive in power applications because of the high power loss (power loss) at the transistor (VCE * IL) resulting in low efficiency. As an alternative, it appears the transition type, which in principle can be seen in Figure 2.


Figure 2. Modifier type transition.

On the type of transition, visible transistor functions as electronic switches that can be opened (off) and closed (on). Assuming that the switches are ideal, if the switch is closed, the output voltage will equal the input voltage, whereas if the switch is opened, the output voltage will be zero. Thus the output voltage pulse generated will be shaped as in Figure5.


Figure 3. Voltage switching.

The amount of the average or DC component of the output voltage can be derived from the following equation:

From the equation above shows that the DC output voltage can be quantified by adjusting the parameter D. The parameter D is known as the duty ratio is the ratio between the length of time the switch is closed (tons) with period T of the output voltage pulse, with 0 <D <1. Parameter f is the switching frequency (switching frequency) used in operating the switch. Unlike the linear type, the type of transition no power is absorbed in the transistor as a switch. This is possible because the switch is closed when no voltage is dropped on the transistor, while during the switch is opened, there was no electric current flows. This means that all power is absorbed in the load, so power efficiency to 100%. But remember, in practice, no switches are ideal, so it will stay there the slightest power loss in the switch components and the efficiency is very high though, will never reach 100%.

Power Distribution System

noreply@blogger.com (windy) — Sat, 09 Apr 2011 17:32:00 +0000

Electric power distribution system is one part of a power system that starts from the incoming PMT substation up to the Tools Counters and Border (APP) at the consumer installation that serves to channel and distribute electricity from a central substation to the customer's load center customers directly or through substations, distribution substations (transformer substations) with an adequate quality of service standards and regulations. thus this distribution system into a separate system for the distribution unit has a component related equipment in its operations to distribute electricity. Where the system is a device elements arranged interdependence to achieve a certain goal by displaying the function assigned.

Viewed from the voltage distribution system at this time can be divided into 2 types namely:

a. Primary distribution, often called the Medium Voltage Network System (JTM) with a nominal operating voltage of 20 kV / 11.6 kV.

b. Secondary distribution, often called the Low Voltage Network System (JTR) with a nominal operating voltage 380/220 volt.

Previously operating voltage value that is used in the environment of PLN at medium voltage level varies is 6 KV, 12 KV and 20 KV as well as the low voltage level is 220/127 volts at a Five-Year Plan starting in 1970 we know the voltage changes PTR / PTM this intended to improve reliability and reduce network losses.

Contact

noreply@blogger.com (windy) — Sat, 09 Apr 2011 15:50:00 +0000

If you have a problem you can send me email at windy.alfian@gmail.com

Thanks for your attention.