ENGINEERING trend (civil,eee,mech,ece,cse,it,eie,pt,text,chem,pet,etc)

EMBEDDED 'C'

2016-11-22T19:34:00.001+05:30

Embedded C programming based on 8051 microcontroller from Gaurav Verma

2016-11-22T19:34:00.000+05:30

Embedded C programming based on 8051 microcontroller from Gaurav Verma

stair climbing robot

2013-04-28T22:23:00.001+05:30

stair climbing robot

modification to paper cutting and rewinding machine

2013-04-28T22:18:00.000+05:30

modification to paper cutting and rewinding machine

vijayawada thermal power station (vtps)

2013-04-13T17:35:00.000+05:30

Dr Narla Tata Rao Thermal Power Station

Dr Narla Tata Rao Thermal Power Plant is located at Vijayawada in Andhra Pradesh. The power plant is one of the coal-based power plants of APGENCO.

Dr Narla Tata Rao Thermal Power Plant is also known Vijayawada Thermal Power Plant. It was developed under 4 stages, with the project cost of Rs 193 Crores and Rs 511 Crores respectively. Again with an investment of RS 840 Crores 2 units were commissioned under III Stage. The seventh unit of 500 MW was commissioned on 2009. The station stood first in country during 94-95, 95-96, 96-97, 97-98 and 2001-02 by achieving the highest plant load factor. The station has received many prestigious awards from various organisations. The station has received Meritories productivity awards for twenty consecutive years and Incentive award for eight consecutive years.

Installed Capacity

Stage	Unit Number	Installed Capacity (MW)	Date of Commissioning	Status
Stage I	1	210	01-11-1979	Running
Stage I	2	210	10-10-1980	Running
Stage II	3	210	05-10-1980	Running
Stage II	4	210	23-08-1990	Running
Stage III	5	210	31-03-1994	Running
Stage III	6	210	24-02-1995	Running
Stage IV	7	500	06-04-2009	Running

Dr Narla Tata Rao Thermal Power Station
Location of Dr Narla Tata Rao Thermal Power Station
Country	India
Location	Vijayawada, Krishna,Andhra Pradesh
Coordinates	14.49°N 78.98°E
Status	Operational
Commission date	Unit 1: November 1, 1979 Unit 2: October 10, 1980 Unit 3: October 5, 1980 Unit 4: August 23, 1990 Unit 5: March 31, 1994 Unit 6: February 24, 1995 Unit 7: April 6, 2009
Operator(s)	APGENCO

Power station information
Primary fuel	Coal-fired
Generation units	6 X 210 MW 1 X 500 MW

Power generation information
Installed capacity	1760.00 MW

mechanical engineering

2013-04-12T02:12:00.001+05:30

Internal combustion engine

The internal combustion engine is an engine in which the combustion of a fuel (normally a fossil fuel) occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine (ICE) the expansion of the high-temperature and high-pressure gases produced by combustion apply direct force to some component of the engine. The force is applied typically to pistons, turbine blades, or a nozzle. This force moves the component over a distance, transforming chemical energy into useful mechanical energy. The first commercially successful internal combustion engine was created by Étienne Lenoir.

Animation of two-stroke engine in operation, with a tuned pipe exhaust.

The term internal combustion engine usually refers to an engine in which combustion is intermittent, such as the more familiar four-stroke and two-stroke piston engines, along with variants, such as the six-stroke piston engine and the Wankel rotary engine. A second class of internal combustion engines use continuous combustion: gas turbines, jet engines and most rocket engines, each of which are internal combustion engines on the same principle as previously described.

An automobile engine partly opened and colored to show components.

The ICE is quite different from external combustion engines, such as steam or Stirling engines, in which the energy is delivered to a working fluid not consisting of, mixed with, or contaminated by combustion products. Working fluids can be air, hot water, pressurized water or even liquid sodium, heated in some kind of boiler. ICEs are usually powered by energy-dense fuels such as gasoline or diesel, liquids derived from fossil fuels. While there are many stationary applications, most ICEs are used in mobile applications and are the dominant power supply for cars, aircraft, and boats.

the difference between engineering and engineering technology

2013-04-11T15:10:00.002+05:30

ENGINEERING ENGINEERING TECHNOLOGY
research
complex analysis
complex design
development development
manufacturing manufacturing
test evaluation test evaluation
routine design
production
operation service maintenance
distribution and sales

mechanical engineering

2013-04-10T19:03:00.003+05:30

How an engine works animation

Automobile engineering

2013-04-09T17:31:00.001+05:30

Mercedes-Benz Chronicle - 125 years of automotive engineering innovations

answer the question in comments and test your knowledge

2013-04-09T10:30:00.002+05:30

question for civil engineer

In a mortar, the binding material is

A.	cement	B.	sand
C.	surkhi	D.	cinder.

answer the question in comments and test your knowledge

2013-04-09T10:28:00.002+05:30

question for electrical and electronics engineer

If 750 µA is flowing through 11 k of resistance, what is the voltage drop across the resistor?

A.	8.25 V
B.	82.5 V
C.	14.6 V
D.	146 V

Automobile Engineering

2013-04-09T01:31:00.001+05:30

2013-04-09T00:10:00.001+05:30

Answer: Option B (yesterday's question i.e7 apr)

Explanation:

The IEEE (Institute of Electrical and Electronics Engineers) was formed in 1963 by the merger of the Institute of Radio Engineers (IRE, founded 1912) and the American Institute of Electrical Engineers (AIEE, founded 1884).

answer the question in comments and test your knowledge

2013-04-08T08:46:00.002+05:30

question for electrical and electronics engineer

In which decade was the American Institute of Electrical Engineers (AIEE) founded?

A.	1850s	B.	1880s
C.	1930s	D.	1950s

Automobile

2013-04-07T23:49:00.003+05:30

Automobile
AUTOMOBILE:An automobile, autocar, motor car or car is a wheeled motor vehicle used for transporting passengers, which also carries its own engine or motor. Most definitions of the term specify that automobiles are designed to run primarily on roads, to have seating for one to eight people, to typically have four wheels, and to be constructed principally for the transport of people rather than goods. The term motorcar has also been used in the context of electrified rail systems to denote a car which functions as a small locomotive but also provides space for passengers and baggage. These locomotive cars were often used on suburban routes by both interurban and intercity railroad systems. It was estimated in 2010 that the number of automobiles had risen to over 1 billion vehicles, with 500 million reached in 1986. The numbers are increasing rapidly, especially in China and India. Etymology The word automobile comes, via the French automobile from the Ancient Greek word αὐτός (autós, "self") and the Latin mobilis ("movable"); meaning a vehicle that moves itself. The loanword was first adopted in English by The New York Times in 1899. The alternative name car is believed to originate from the Latin word carrus or carrum ("wheeled vehicle"), or the Middle English word carre("cart") (from Old North French), in turn these are said to have originated from the Gaulish wordkarros (a Gallic Chariot). Benz "Velo" model (1894) –entered into anearly automobile race as a motocycle
Classification	Vehicle
Industry	Various
Application	Transportation
Fuel source	Gasoline, Diesel, Electric,Hydrogen, Solar energy
Powered	Yes
Self-propelled	Yes
Wheels	3–4
Axles	1–2
Inventor	Ferdinand Verbiest A photograph of the original Benz Patent-Motorwagen, first built in 1885 and awarded the patent for the concept Ford Model T, 1927, regarded as the first affordable American automobile The Nissan Leaf is an all-electric carlaunched in December 2010 A robotic Volkswagen Passat shown atStanford University is a driverless car

Eiffel tower (the achievement of engineers)

2013-04-06T17:30:00.003+05:30

A series of images showing the construction of the Eiffel Tower, 1887-1889.

The Eiffel Tower (French: La Tour Eiffel) is an iron lattice tower located on the Champ de Mars in Paris, named after the engineer Gustave Eiffel, whose company designed and built the tower. Erected in 1889 as the entrance arch to the 1889 World's Fair, it has become both a global cultural icon of France and one of the most recognizable structures in the world. The tower is the tallest structure in Paris^[10] and the most-visited paid monument in the world; 7.1 million people ascended it in 2011. The third level observatory's upper platform is at 279.11 m (915.7 ft) the highest accessible to public in the European Union and the highest in Europe as long as the platform of the Ostankino Tower, at 360 m (1,180 ft), remains closed as a result of the fire of August 2000. The tower received its 250 millionth visitor in 2010.

The tower stands 320 metres (1,050 ft) tall, about the same height as an 81-storey building. During its construction, the Eiffel Tower surpassed the Washington Monument to assume the title of the tallest man-made structure in the world, a title it held for 41 years, until the Chrysler Building in New York City was built in 1930. Because of the addition, in 1957, of the antenna atop the Eiffel Tower, it is now taller than the Chrysler Building. Not including broadcast antennas, it is the second-tallest structure in France, after the Millau Viaduct.

The tower has three levels for visitors. Tickets can be purchased to ascend, by stairs or lift (elevator), to the first and second levels. The walk from ground level to the first level is over 300 steps, as is the walk from the first to the second level. The third and highest level is accessible only by lift - stairs exist but they are not usually open for public use. Both the first and second levels feature restaurants.

The tower has become the most prominent symbol of both Paris and France, often in the establishing shot offilms set in the city.

First drawing of the Eiffel Tower by Maurice Koechlin The Eiffel Tower as seen from the Champ de Mars

MECHANICAL ENGINEERS TECHNIQUES

2013-04-05T19:56:00.001+05:30

8.CHEMICAL ENGINEERING

2013-04-05T19:27:00.002+05:30

7.WHAT IS CHEMICAL ENGINEERING? WHERE THE CHEMICAL ENGINEERS WORK?

Chemical engineering is the branch of engineering that applies the physical sciences (e.g., chemistry andphysics) and/or life sciences (e.g., biology, microbiology and biochemistry) together with mathematics andeconomics to processes that convert raw materials or chemicals into more useful or valuable forms. In addition, modern chemical engineers are also concerned with pioneering valuable materials and related techniques – which are often essential to related fields such as nanotechnology, fuel cells and biomedical engineering. Within chemical engineering, two broad subgroups include 1) design, manufacture, and operation of plants and machinery in industrial chemical and related processes ("chemical processengineers"); and 2) development of new or adapted substances for products ranging from foods and beverages to cosmetics to cleaners to pharmaceutical ingredients, among many other products ("chemical productengineers").

7.PETROLEUM ENGINEERING

2013-04-05T19:12:00.001+05:30

7.WHAT IS PETROLEUM ENGINEERING? WHERE THE PETROLEUM ENGINEERS WORK?

Petroleum engineering is a field of engineering concerned with the activities related to the production of hydrocarbons, which can be either crude oil or natural gas. Exploration and Production are deemed to fall within the upstream sector of the oil and gas industry. Exploration, by earth scientists, and petroleum engineering are the oil and gas industry's two main subsurface disciplines, which focus on maximizing economic recovery of hydrocarbons from subsurface reservoirs. Petroleum geology and geophysics focus on provision of a static description of the hydrocarbon reservoir rock, while petroleum engineering focuses on estimation of the recoverable volume of this resource using a detailed understanding of the physical behavior of oil, water and gas within porous rock at very high pressure.

The combined efforts of geologists and petroleum engineers throughout the life of a hydrocarbon accumulation determine the way in which a reservoir is developed and depleted, and usually they have the highest impact on field economics. Petroleum engineering requires a good knowledge of many other related disciplines, such as geophysics, petroleum geology, formation evaluation (well logging), drilling, economics, reservoir simulation,reservoir engineering, well engineering, artificial lift systems, completions and oil and gas facilities engineering.

6.INFORMATION TECHNOLOGY

2013-04-04T21:43:00.005+05:30

6.WHAT IS INFORMATION TECHNOLOGY ENGINEERING? WHERE THE INFORMATION TECHNOLOGY ENGINEERS WORK?

Information technology (IT) is the application of computers and telecommunications equipment to store, retrieve, transmit and manipulate data, often in the context of a business or other enterprise.The term is commonly used as a synonym for computers and computer networks, but it also encompasses other information distribution technologies such as television and telephones. Several industries are associated with information technology, such as computer hardware, software, electronics, semiconductors, internet, telecom equipment, e-commerce and computer services.

In a business context, the Information Technology Association of America has defined information technology as "the study, design, development, application, implementation, support or management of computer-based information systems".The responsibilities of those working in the field include network administration, software development and installation, and the planning and management of an organisation's technology life cycle, by which hardware and software is maintained, upgraded, and replaced.

Humans have been storing, retrieving, manipulating and communicating information since the Sumerians in Mesopotamia developed writing in about 3000 BC, but the term "information technology" in its modern sense first appeared in a 1958 article published in the Harvard Business Review; authors Harold J. Leavitt and Thomas L. Whisler commented that "the new technology does not yet have a single established name. We shall call it information technology (IT)." Based on the storage and processing technologies employed, it is possible to distinguish four distinct phases of IT development: pre-mechanical (3000 BC – 1450 AD), mechanical (1450–1840), electromechanical (1840–1940) and electronic (1940–present).This article focuses on the most recent period (electronic), which began in about 1940.

5.COMPUTER SCIENCE AND ENGINEERING

2013-04-04T21:32:00.000+05:30

5.WHAT IS COMPUTER SCIENCE AND ENGINEERING? WHERE THE COMPUTER SCIENCE ENGINEERS WORK?

Computer science or computing science (abbreviated CS or CompSci) is the scientific and practical approach to computation and its applications. A computer scientist specializes in the theory of computation and the design of computational systems.

Its sub fields can be divided into a variety of theoretical and practical disciplines. Some fields, such as computational complexity theory (which explores the fundamental properties of computational problems), are highly abstract, whilst fields such as computer graphics emphasize real-world applications. Still other fields focus on the challenges in implementing computation. For example, programming language theory considers various approaches to the description of computation, whilst the study of computer programming itself investigates various aspects of the use of programming language and complex systems. Human-computer interaction considers the challenges in making computers and computations useful, usable, and universally accessible to humans.

4.ELECTRONICS AND COMMUNICATION ENGINEERING

2013-04-02T23:48:00.000+05:30

4.WHAT IS ELECTRONICS AND COMMUNICATION ENGINEERING? WHERE THE ELECTRONICS AND COMMUNICATION ENGINEERS WORK?

electronic engineering, is an engineering discipline where non-linear and active electrical components such as electron tubes, and semiconductor devices, especially transistors, diodes and integrated circuits, are utilized to design electronic circuits, devices and systems, typically also including passive electrical components and based on printed circuit boards. The term denotes a broad engineering field that covers important sub fields such as analog electronics, digital electronics, consumer electronics, embedded systems and power electronics. Electronics engineering deals with implementation of applications, principles and algorithms developed within many related fields, for example solid-state physics, radio engineering,telecommunications, control systems, signal processing, systems engineering, computer engineering,instrumentation engineering, electric power control, robotics, and many others.

The Institute of Electrical and Electronics Engineers (IEEE) is one of the most important and influential organizations for electronics engineers.

3.mechanical engineering

2013-04-02T18:33:00.004+05:30

3.what is mechanical engineering? where the mechanical engineers work?

Mechanical engineering is a discipline of engineering that applies the principles of physics and materials science for analysis, design, manufacturing, and maintenance of mechanical systems. It is the branch of engineering that involves the production and usage of heat and mechanical power for the design, production, and operation of machines and tools. It is one of the oldest and broadest engineering disciplines.

The engineering field requires an understanding of core concepts including mechanics, kinematics,thermodynamics, materials science, structural analysis, and electricity. Mechanical engineers use these core principles along with tools like computer-aided engineering and product life cycle management to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, transport systems, aircraft, watercraft, robotics, medical devices, and others.

Mechanical engineering emerged as a field during the industrial revolution in Europe in the 18th century; however, its development can be traced back several thousand years around the world. Mechanical engineering science emerged in the 19th century as a result of developments in the field of physics. The field has continually evolved to incorporate advancements in technology, and mechanical engineers today are pursuing developments in such fields as composites, mechatronics, and nanotechnology. Mechanical engineering overlaps with aerospace engineering, building services engineering,metallurgical engineering, marine engineering, civil engineering, electrical engineering, petroleum engineering, manufacturing engineering, and chemical engineering to varying amounts. Mechanical engineers also work in the field of Bio medical engineering, specifically with biomechanics, transport phenomena,biomechatronics, bionanotechnology and modeling of biological systems, like soft tissue mechanics.

2.Electrical engineering

2013-04-02T18:23:00.002+05:30

what is electrical engineering? where the electrical engineers work?

Electrical engineering is a field of engineering that generally deals with the study and application of electricity,electronics, and electromagnetism. This field first became an identifiable occupation in the latter half of the 19th century after commercialization of the electric telegraph, the telephone, and electric power distribution and use. It now covers a wide range of sub fields including electronics, digital computers, power engineering,telecommunications, control systems, RF engineering, and signal processing.

Electrical engineering may include electronic engineering. Where a distinction is made, usually outside of the United States, electrical engineering is considered to deal with the problems associated with systems such as electric power transmission and electrical machines, whereas electronic engineering deals with the study of electronic systems including computers, communication systems, integrated circuits, and radar.

From a different point-of-view, electrical engineers are usually concerned with using electricity to transmit electric power, while electronic engineers are concerned with using electricity to process information. The sub disciplines can overlap, for example, in the growth of power electronics, and the study of behavior of large electrical grids under the control of digital computers and electronics.

1.civil engineering

2013-04-02T17:55:00.000+05:30

1.what is civil engineering ? where the civil engineers work?

Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Civil engineering is the oldest engineering discipline after military engineering, and it was defined to distinguish non-military engineering from military engineering. It is traditionally broken into several sub-disciplines including environmental engineering, geotechnical engineering, geophysics, geodesy, control engineering, structural engineering, biomechanics,nanotechnology, transportation engineering, earth science, atmospheric sciences, forensic engineering, municipal or urban engineering, water resources engineering, materials engineering, coastal engineering, surveying, and construction engineering. Civil engineering takes place on all levels: in the public sector from municipal through to national governments, and in the private sector from individual homeowners through to international companies

ENGINEERING trend (civil,eee,mech,ece,cse,it,eie,pt,text,chem,pet,etc)

EMBEDDED 'C'

stair climbing robot

stair climbing robot

modification to paper cutting and rewinding machine

vijayawada thermal power station (vtps)

Dr Narla Tata Rao Thermal Power Station

Installed Capacity

mechanical engineering

Internal combustion engine

the difference between engineering and engineering technology

mechanical engineering

Automobile engineering

Mercedes-Benz Chronicle - 125 years of automotive engineering innovations

answer the question in comments and test your knowledge

answer the question in comments and test your knowledge

Automobile Engineering

answer the question in comments and test your knowledge

Automobile

Etymology

Eiffel tower (the achievement of engineers)

MECHANICAL ENGINEERS TECHNIQUES

8.CHEMICAL ENGINEERING

7.PETROLEUM ENGINEERING

6.INFORMATION TECHNOLOGY

5.COMPUTER SCIENCE AND ENGINEERING

4.ELECTRONICS AND COMMUNICATION ENGINEERING

3.mechanical engineering

2.Electrical engineering

1.civil engineering