Computer Problem Solution

How To Remove Error Deleting File or Folder

2012-04-21T09:46:00.002-07:00

It is a very common and annoying message that the file or folder you are trying to deleted cannot be deleted or thependrive cannot be removed as it is used by the system.In this tutorial I will show how to remove your pendrive or delete the files and folders if you get such an error.This error has various flavours and it can be of any of the following types:

Cannot delete file: Access is denied
There has been a sharing violation.
The source or destination file may be in use.
The file is in use by another program or user.
Make sure the disk is not full or write-protected and that the file is not currently in use.

1. Download and Install Unlocker.Click Here
2. Right click on the pendrive or file or folder that has to be removed or deleted.Now, Click on the Unlocker

3. Now it will show all the processes that are using the file or folder or Pendrive.

4. Click on the Unlock All and you are done.Now you can delete the file or folder or remove the pendrive.

Enjoy Frnds , any problem ? comment on please.

Runtime Error r6002 Floating Point Support not Loaded – Repair!

2012-04-21T02:16:00.002-07:00

The first thing I can say about Runtime Error r6002 Floating Point Support not Loaded is that it can become nothing but a pain in the…anyway, I’ve prepared the following step-by-step quick guide which I believe should solve this problem for most users.

Common symptoms of this error
First of all, this error isn’t unique to this program or another; it usually occurs and may occur whenever you try to run programs such as Windows Media Player, Firefox, Winrar etc. Usually, Windows pops up an error message that indicates which programs caused this error.
Again, those are the most typical symptoms that most users run into with this error, however as you’ve probably already noticed, the Web is full of forum posts about various other situations where this error erupts.
Possible causes to this error
To make it clear – there isn’t one specific cause that I can point out that causes this Runtime Error r6002 Floating Point Support not Loaded, however, there are few factors that usually cause it to erupt:
(1) Virus or spyware infection
(2) Incorrect software installation or removal
(3) Corruption of program files
(4) Missing program files

Step-by-step repair guide
As mentioned earlier, there several common factors that cause this error, so let’s handle them one by one.
(1) Scan for viruses and spyware
Use a reliable anti-virus program such as Microsoft Security Essentials. It’s free (for anyone with a genuine Windows system) and I found it much more reliable than all the other free anti-virus solutions.
If no viruses/spyware were found then…
(2) Uninstall the related program
When Windows pops up that error message, see if it indicates a program name or a path to a specific program file. Once you identify that program – uninstall it!
In many cases it is MICROSOFT VISUAL C ++.
(3) Delete all that program’s related files and folders
If any files and folders that belong to that program are left on your HD –delete them.
Attention! Just to be on the safe side – before you do that, open a new folder on your desktop and keep a backup of those files and folders.
(4) Re-install the latest version of that program and restart your PC
If it was MICROSOFT VISUAL C ++ then download it from here .
In most cases, following these 4 steps should solve the problem.
If not, then there’s probably a problem with one or several incorrect/corrupt file/application paths, program shortcuts, etc.
(5) Detect the source(s) to this error
Use the following Windows errors scanner (free scan) to conduct an in-depth scan to your entire Windows system. By the end of the scan it’ll provide you with a detailed report about the various errors that it has detected.

Pinpointing problematic Windows OS configuration

Go over the list of errors - see if it has detected the source to this Runtime Error r6002 Floating Point Support not Loaded error.

Enjoy frnds and if u faces any problem then hit me a comment, i'll help u a soon as possible.

Use Automatic Fixed Read More Jump Break With Thumbnail On Blogger

2012-04-17T02:22:00.000-07:00

Add Auto Read More Post Summary's To Your Blog

Step 1. In your Blogger dashboard click Design > Edit Html > Tick The Expand Widget Templates Box

Step 2. Find the following piece of code in your blogs Html : (Click CTRL and F for a search bar .

</head>

Copy the following code and paste it Directly Above / Before </head>

Important

The code in red sets how the post summary's are displayed.Remember if a post has an image it will be re sized into a thumbnail to be displayed beside the summery.If the post does not have an image just a text summery will be displayed.

summary_ noimg= 430; --> The length of the summery if the post does not have a thumbnail.
summary_img = 340; --> The length of the summery if there is an image in the post that will be converted into a thumbnail.
null_thumb_height = 120; --> The height in pixels of the thumbnail.
null_thumb_width = 120; --> The width in pixels of the thumbnail.

Step 3. Find the following piece of code in your blogs Html : (Click CTRL and F for a search bar .

<data:post.body/>

Replace <data:post.body/> With The Code Below

<b:if cond='data:blog.pageType == "item"'>
<data:post.body/>
<b:else/>
<b:if cond='data:blog.pageType == "static_page"'>
<data:post.body/>
<b:else/>
<div expr:id='"summary" + data:post.id'>
<data:post.body/>
</div>
<script type='text/javascript'>
createSummaryAndThumb("summary<data:post.id/>");
</script>
<div style='clear: both;'/>
<span class='rmlink' style='font-weight:bold;padding:5px;float:right;text-align:right;'><a expr:href='data:post.url' >Read more ... </a></span>
</b:if>
</b:if>

Your Can change the text in red From Image by Adding This Code.

<div class='separator' style='clear: both; text-align: right; margin-right: 5px; '>
<img border='0' height='31' src='Your Image url Here' width='150'/></div>

Note - You can change the text in red from Read More to "Continue Reading", "Read Full Post" or With Images Like This. Copy This Image And upload any image hosting site and paste image url in Code Above.

Now enjoy frnds. if u face any problem then hit me a comment i'll help you as soon as possible.

Change Older Post & Newer Post Text With Image Button

2012-04-17T01:55:00.001-07:00

1. First if all make Backup Your Template
2. go to your blogger Dashboard >> Template >> Edit html >> Proceed Make Sure you check the "Expand Widget Templates.
3. Find the following piece of code in your blogs Html : (Click Ctrl and F for a search bar to help find the code.

<data:newerPageTitle/>

Replace with this code.

4. Find the following piece of code in your blogs Html : (Click Ctrl and F for a search bar to help find the code.

<data:olderPageTitle/>

Replace with this code.

5. Find the following piece of code in your blogs Html : (Click Ctrl and F for a search bar to help find the code.

<data:homeMsg/>

you have found 1 of 2. Replce 1 of 2 codes with this code.

and click save! Thats its

after then refresh your page see new look.
Enjoy frnd and if u having any problem then hit me a comment .

Hide Any Drive without any software easily

2012-04-05T08:39:00.001-07:00

Most of you must have wondered if there exists a way without using software to Hide A Drive completely so that it cannot be viewed or accessed without unlocking it. so, here is a easiest method to hide drive simple 4 steps.

Follow The Steps For Do This..

1. Goto run type “gpedit.msc” (without quotes)

2. select user configuration —> administrative templates —> windows components —> windows explorer(click on it)

3. On right panel search for hide theses specified drives in my computer.

4. Double click it mark on enable to hide the drive and select drive the which you want to hide. If u wanted to hide all the drives which are on your system then select restrict all drives.
to make it unhidden mark on disable option.

Enjoy this tricks frndsssssss

Take Screen Shots Without Any Software

2012-03-30T22:45:00.000-07:00

Taking screen shots is the most essential and common task for every bloggers. This task can be done by Snipping Tool of Windows 7. But XP users can't enjoy the benefit of Snipping Tool. That's why, this post is especially for them. From this post we will learn how to take screen shots without any additional software. We only use our keyboard and Paint to take screenshots. So, do the followings :

To take a screen shot just press Print Screen SysRq key which is the next of F12 key. Pressing Print Screen SysRq you have captured the screen.

Now open Paint . To open it go Start and type paint in search box.
After opening Paint maximize the Paint windows and press Ctrl+V to paste the taken screen shot. Then save it.

Remove "Subscribe to: Posts (Atom)"

2012-03-29T09:18:00.001-07:00

Go to dashboard/ template/ edit HTML
Click the 'Expand Widgets Templates' box
Find:

<b:if cond='data:blog.pageType != "item"'> 
<b:if cond='data:feedLinks'>
<div class='blog-feeds'>
<b:include data='feedLinks' name='feedLinksBody'/>
</div>
</b:if>

Remove this line:

<b:include data='feedLinks' name='feedLinksBody'/>

That should remove Posts (Atom).

Enjoy Frnds , have a nice day, if u faces any problem then hit me a comment, i'll help u as soon as possible.

Enable Right Click on Disabled Websites in Firefox

2012-03-22T23:17:00.001-07:00

HI! FRNDS !! U faces Sometimes some websites have blocked right click for many security reasons well obviously they know that its not a stealth secure but they just wanted to stay safe from some dummy scrappers but if you wanted to enable right click on disabled websites than you can do that with an easy add-on for Firefox which is really powerful for doing more web developing work but also provides you with an easy way to enable right click.

Using Web Developer Firefox Add-on

Web developer Firefox add-on can do your job really easily with its all JavaScript's disabling feature that works really well on any webpage. So now you just have to install Web Developer 1.1.9 Firefox add-on and than you have to go to Disable > Disable JavaScript > All JavaScript and that’s it your website will load with all the JavaScript's turned off and than you can use your right click and do any stuff without letting the administrator know about that thing.

So I hope this will cleared to you and now you will be able to use your right click on any website, enjoy frnds with lovely smile.. keep visithing..

Add Background Music in your website

2012-03-22T11:31:00.001-07:00

hi !frnds today i m going to tell about how to add music in Blogger Blogs or any other websites. when any one visit in your website Well music plays a very important role in any persons life, when you are sad simply tune in some music and your mood will get ok. So many bloggers out their want to add some background music on their website so that readers and visitors can be amused and their reading experience can be more delightful.

So we will be showing you how to add music in the background on your website, off course its not as simple as 123 well you will need to convert your song into .swf file and than upload it to file hosting service from which we can access that song from anywhere.

For the conversion purpose we will be using the Hootech SWF Converter software with this software you can simply convert any song into .SWF File by simply hitting convert button. After conversion is done we will upload our file to Dropbox ( best file hosting service ) and embed into the flash code and add it to our website.

Follow below steps .:

1. Download Hootech .SWF Converter.

2. Now after you have downloaded this open it up and navigate to the Options tab like below, now in this options menu you have to tweak some settings so that you get the best file as output so make your settings same as below in the image.

3. So as you can see in the above image we have chosen no interface so we will not get any play and pause buttons so if you want show those you can change your settings according to your theme or whatever.

4. Now drag any song or music you wanna convert into .SWF File and hit Convert All.

5. So now you will get that .SWF File in the same folder from where you have dragged the song or music file.

6. Now our conversion is done now simply upload that file to the Dropbox.com, if you do not have a account create one is free and you will get free 2GB space, so create an account and upload the .SWF file to the Dropbox > Public Folder, and than right click on the file and get the Public Download Link.

7. So now you will have your Download link something like below, now to test this if its working finer simply paste this link in your browser and click enter your song will start playing.

URL will look something like below .:

http://dl.dropbox.com/u/38358196/xxxxxx.swf

8. Now the last step is to embed this .SWF File in your blog or website so that everyone can hear that song whenever they open your blog or website.

9. Now go to Blogger.com and navigate to the layout section and click on Add a Gadget.

10 Choose Add HTML/JavaScript and paste the below code into that gadget replacing below URL with the one you got from the Dropbox.com like above.

COPY CODE HERE

11. So copy the code from the above text file and paste it in that HTML Gadget after replacing that Red line with your URL.

12. Now simply save your Gadget and Drag it to position anywhere on your blog, there is no interface but it will take some space so might get some blank space where ever you will place this gadget.

13. Now reload your website and enjoy music playing without any streaming or stops, its continuous and smooth so hope you enjoyed this post have fun :)

How to Disable Dragging in Blogger Website

2012-03-22T11:26:00.000-07:00

Disabling Drag option can come handy when you want to protect your unique work from the robotic copiers and others whom you do not trust. So with this simple hack you can disable mouse dragging so person will not able to drag text and images on your website hence giving no chance for copying well he may get some alternate way to copy out the content .

Follow below steps :

1. Go to Blogger.com

2. Navigate to Design and than Edit HTML

3. Now press Ctrl + F to open the search feature and than search for <body tag.

4. Now you will see <body with a something more code after it so you have to paste the below code right after it which will make code look like in the image below.

ondragstart='return false' onselectstart='return false'

6. Now just click save template and click view Blog and check out if this small code is making wonders or not well it works perfect as I was using this same thing to protect my blog from scrappers but due to many request to disable it from my blog I did it now but it’s a great way to protect your blog so have fun :)

Trick to Get your FeedBurner Subscribers Count Instantly

2012-03-22T11:17:00.003-07:00

A really simple and helpful hack to get to know your Feedburner subscribers count instantly. Sometimes you do not have any badge embed on your website as a chicklet for your Feedburner Feed and you really wanted to know the exact subscribers your have on your feed till present, well so the one way is to get subscribers count from your Feedburner account by signing in to your Google Account or we have another simple method to do this using a small url trick.

So now this hack works simply by copying and changing the below url and adding your FeedBurner username to it so like I have done in the below url if you check the below url you will see a simple chicklet image displaying my Feedburner subscribers count.

http://feeds.feedburner.com/~fc/YOUR-USERNAME-HERE

So you simply have to manipulate the above url with your own Feedburner Username and than paste that url into your browser address bar and that’s it you will get your Feedburner subscribers count like above in the image.
So this was the simple trick to get your Feedburner Subscriber Counts instantly without logging into your Google Account..

Enjoy Frnds

How to Disable Right Click in Blogger Blogs

2012-03-22T11:11:00.002-07:00

Disabling right click in Blogger websites is really easy as it does not need any technical knowledge you simply have to copy and paste some script into your <body> and that’s it everything is done.

Now why will anyone want to disable the right click in their website,Well there can be many reasons but the main reason which comes to anyone's mind is the content copying and the page source viewing well there are many another ways to view the source or copy content as you can see on my website I had also applied this script earlier which disables the right click on website but recently I just removed this script as many people were having problems.

Follow below steps .:

1. Go to your dashboard in Blogger.com

2. Now click Template and than click Edit HTML, now click on Proceed.

3. Now simply copy and paste the below script right before the </body> tag.

var message="";
function clickIE()
{
if (document.all) {
(message);return false;}
}
function clickNS(e)
{
if (document.layers||(document.getElementById&&!document.all)) {
if (e.which==2||e.which==3) {(message);return false;}}
}
if (document.layers){
document.captureEvents(Event.MOUSEDOWN);document.onmousedown=clickNS;}
else{
document.onmouseup=clickNS;document.oncontextmenu=clickIE;}
document.oncontextmenu=new Function("return false")
// -->
</script>

4. That’s it now click on Save Template Button, now script is up and running on your blog just check it out refresh your blog and try to right click you will not be able to do that, ask your readers to do this thing.

Have Fun :) Guys and now enjoy secured blog.

How to Change Cursor in Blogger Website

2012-03-22T10:51:00.000-07:00

Cursor can play very important part in customizing your Blogger Website well after templating everything from posts to ads its time to customize the Cursor. Well the trick I will tell will help you to change your cursor @ any time by just uploading a image file and changing the links weather you want to write your own name on cursor or want to put a Heart for a loved one its your choice so follow the below guide and have FUN.
Follow the Below Steps to Change Cursor Shape .:
1. You need to go to www.Blogger.com
2. Sign in with your Blogger account
3. Go to Dashboard than Design
4. Open Edit HTML
5. Now click ctrl + f to open the search feature
6. Search for </head> tag
7. Now paste the below <script> right above </head> tag

<style type='text/css'>body, a, a:hover {cursor: url(http://safir85.ucoz.com/bdlab-blogspot/COOL_GREEN_POINTER.cur), progress;}</style>

9. After pasting just click Save Template and check your Blogger Blog with a new fresh Cursor which mover according to your Will Muhahahhha… Just Jocking So Enjoy This Cursor Changing Trick.
Customization Part .: As in the above <Script> Section you can see the .cur URL which is grabbing your new cursor from that URL now if you want to change your cursor than juts change that URL with another one and that’s it your cursor is changed again.

Create Your Own Custom Search Engine For Your Website

2012-03-22T08:15:00.001-07:00

hi guy today i m going to tell u about that how to create your custom search Engine for your website.i hope you really enjoy it Follow the below steps for do this ..

1.First you Go to this site Click Here

Click on Create a Custom Search Engine

. and then login with your gmail account

on the Site to search you can add any address that you want

like rapidshare.com , Megaupload.com, Hotfile.com

and remember put * mark before the site name

eq : *.rapidshare.com

Check on I have read and agree to the Terms of Service. and then click next

try it. and then click on finish

for more better result you can add any keyword that you want

like .zip .mp3 .rar .3gp .wma .wmv .avi .mp4 .pdf .mpg, by going to the control panel

Enjoy Frnds and keep visiting..

Remove The Attribution Widget

2012-03-19T09:05:00.001-07:00

HOW TO REMOVE ''POWERED BY BLOGGER''
frnds u want to remove attribution widget then just follows these few simple steps. after removing u must feel good na ?? lets come........

Go to Design > Template > Edit HTML. Before you do anything, download a copy of your blog (you should always do this before experimenting... just in case...)

Type CTRL + F on your keyboard to bring up the 'Find' box and then type the word attribution into that box. The word will highlight in green in your coding, and the html will automatically have scrolled down to the right place..
As shown, you need to change the wording in two places. Where you see, you need to change the 'no' to a 'yes'. And where you see locked='true', you need to change this statement to 'false'. Then click Save Template.

As you can see, I have changed these two statements (and highlighted them in red colour to make them easier for you to see) and then I saved the template.

Go back to layout and you will now see a widget at the bottom of your blog, titled Attribution.

Click on Edit - this brings up the widget box. You can now click the Remove button to delete this widget from your blog.

Now save arrangement.

Now u want to see your blog page?? just go at home page of your blog. u'll get your blog page at bottom side as u think that ''powered by blogger'' has been removed.

Enjoy frnds if u faces any problem then hit me a comment, i'll help u as possible.

Domain Availability check

2012-03-16T23:25:00.000-07:00

guyz u want a domain???

check your desired domain availability click here

Remote Access & Destop Sharing

2012-03-16T23:19:00.000-07:00

hi guyz today i m telling about how to share our destop with our frnds or worker .
Remote access and desktop sharing is very useful in today's world.
You may access your office computer by using your home computer and vice versa.
You may transfer files, can fix errors and can do anything. The remote system screen will appear on your screen and you will have the power to control the remote system by using your mouse and keyboard.
Its a magic.

Just download click here

License: Free for home users

Screenshot of main screen, more screenshots are here, http://www.teamviewer.com/hi/products/screenshots.aspx

TeamViewer must be installed on both system i.e. system that you want to connect, for example, install it on your home system as well as on your office system.
After download, install it and run it.
It will automatically generate an id and password for you.
Give it to your friend or anyone to fit it on remote system(Fill it in team viewer).
Now, as he will put this info, you will get connected. Now, you are ready to control it remotely. Fix any error or solve any issue. Its all done, Enjoy remote access.
Enjoy frnds

Submit Your URL/Website To Google and Other Search Engines

2012-03-16T22:45:00.001-07:00

Do you want to add your site to all popular search engines?
Do you want to see your site in google searches with best position?
Do you want to get more traffic to your site?
Then you are at the right place.

How to submit your site to Google:

First visit this url http://www.google.com/addurl/?continue=/addurl
Now, type your website url in the given field and fill the captcha code carefully and hit enter or submit.
Congrats, your site has been submitted to google for crawling, now after some time, google crawler, generally known as spider, will crawl your website and display in google searches.

Please note: This may take some time, may be from 1 day to 1 week, as we know, how busy google really is.

How to submit your site to all search engines at once:

First visit this url http://www.addme.com,
Now, enter your website url in the given field and continue and it will ask you some more things, like about your site, search keywords, etc just fill them carefully,(Keywords will directly affect your site listing and search ranks, please be careful and choose good keywords),
Now, all done, your site has been submitted and will be crawled by all major and popular search engines.

Note:- Crawling time of each search engine is differnet, so one may take 1 day while other may take 1 month, so please wait and you will get approx 15 mails from addme, just read everyone and you have to click on a link or follow some simple steps to complete your submissions.

How to add contact us page in your blog

2012-03-10T03:20:00.000-08:00

Sign up for a free account at emailmeform
Once you are registered click the "Add a Form" button and choose the form builder option.

Keep your form simple with some important fields only like Name, Website URL, Email, Age, Country, Subject and Message. The form builder looks like this,

The form builder has blue buttons at left and display at right. When you click a button on left the effect is displayed on right. Now kindly follow as I instruct for keeping things simple and for creating a simple but informative contact form.
Follow this order:

Click the Name button in advance section
Next click Web site
Next Email
Next Hidden Field. Now click the hidden field section on the right and rename it as Age
Next click Hidden Filed again and rename it as Country
Next click File Upload (Optional you can leave this option if you don't want users to send you files via email)
Now From the Basic section click Paragraph Text & click it to rename it as Message
To make a specific form option a must to fill then simply click that row and select required as shown below

Your contact form now must look something like this:

9. Click the Form Title and add some message there for your visitors. For example you can write :

We Love To Hear From You
Feel free to ask for any help. We will catch you back as soon as time allows

If you wish you can remove the form title by unchecking the box and deleting the description text. See below

10. Now replace send Email by submit and align it to right as shown below:

11. Next click the Captcha Code at the bottom and select the none option from the left section as shown below:

This security code is often added to prevent spam but I have never used this security code and I honestly have received not even a single spam till today. Just remove it to make the contact form even more neater.
12. Finally hit the Save Form Button and a window will appear as shown below:

14. Choose the second option and add a recipient email ID. Choose an ID that you often use so that whenever someone leave a message you may receive it straight in your inbox. You can also add more than one recipients. See below:

Leave other options as default. Hit Save! Now choose the third option.

15. In Form manager Click Code

16. Choose the HTML Only option and copy the code.

It is therefore better that first you create a Page on Blogger and publish it. Fetch its URL and paste it in the blank "Enter URL where form is embedded"
Now simply copy the code and paste it in your contact page. To delete the emailmeform logo from the contact form find and delete a similar code like the one below from the code you just copied.

<div><font face="Verdana" size="2" color="#000000">Powered by</font><span style="position: relative; padding-left: 3px; bottom: -5px;"><img src=
"http://www.emailmeform.com/builder/images/footer-logo.png" /></span><font face="Verdana" size="2" color="#000000">EMF</font> <a style="text-decoration:none;" href="http://www.emailmeform.com/"
target="_blank"><font face="Verdana" size="2" color="#000000">Forms Online</font></a>
</div><a style="line-height:20px;font-size:70%;text-decoration:none;" href="http://www.emailmeform.com/report-abuse.html?http://www.emailmeform.com/builder/form/r99G329aiV6k6" target=
"_blank"><font face="Verdana" size="2" color="#000000">Report Abuse</font></a>

Publish the page and bingo you are done! I know the steps are lengthy but the result is indeed worth it. In my coming posts you will learn how to completely customize this contact form with your own colors and styles. See our contact form as an example. I just hope you may have found today's tutorial helpful. If you need any help please do not hesitate to post your question. Have fun buddies! :)
Note: Paste the Contact Form code in Edit HTML mode only and hit the publish button on blogger Post Editor. Do not toggle to compose mode because this will collapse the form

How To Remove "POWRED BY BLOGGER" From Bottom Side of Blog

2012-03-08T04:51:00.002-08:00

Go in to 'Edit HTML' (under the 'Design' tab).

Search through the HTML for ".footer-outer"
after then add HTML bellow "footer-outer"

/* Footer
----------------------------------------------- */
.footer-outer {
margin: -$(shadow.spread) 0 -1px;
padding: $(shadow.spread) 0 0;
color: $(footer.text.color);
overflow: hidden;
display: none
}

AFTER then save template.

How To remove the Powered by Blogger from your blog

2012-03-07T10:24:00.000-08:00

How do I remove the Powered by Blogger from my Blogger blog?

In order to remove you will need to edit the blogger template and delete the attribution widget.

Please backup your blogger template before you make any changes to it. This helps to revert back to the original template when something goes wrong while editing your template.Just Download your Template

Steps to remove the Powered by Blogger text from your blog:

1. Go to Blogger Dashboard. Click on Layout. Click on the Page Elements tab for your Blog.

2. Click on Edit HTML and select the Expand Widget Templates checkbox.

3. Press CTRL+F And Search for Attribution widget.

Remove the selected code from your blogger template carefully.

How To Find Your Product Key In Windows XP, Vista and Windows 7

2012-03-05T00:21:00.000-08:00

hi!!! GUYZ
In this tutorial we will look at how to find your product key for Windows XP, Vista and 7. Normally your key will either be displayed on the Windows installation CD sleeve or on the top/ bottom of your desktop tower or laptop. However, over time these either get lost or become unreadable. The version of the product key that is stored in the registry is encrypted for security reasons, so it won’t be of any use to you, should you wish to do a reinstall, which is where 3rd party programs come in. For this particular tutorial we will be using Magical Jelly Bean Keyfinder (v2.0.8) which is the free version (clean and virus free) and works on 32bit and 64bit versions of Windows XP, Vista and Window 7. It will also find the keys for MS Office (not tested on 2010) as well as other programs. Below is a list of what it won’t cover, but the paid for version ($24.95) will:

Recover serials for Adobe CS2-CS5 products
Recover serials for Office 2010
Scan remote computers
Scan Vista virtual store
USB install support
Auto-updater and technical support

First, download the free version of Magical Jelly Bean Keyfinder and install it. Note that during the install, it may ask you to also install Registry Mechanic or similar. Don’t install these as registry cleaners do more harm than good.

Don’t install Registry Mechanic. Check the I don’t want to install this option and Next.

That’s the main program installed. Now if you leave the tick in the Launch Keyfinder box checked, then the program will automatically start. Once it does, you will see all of the Product Keys (I have blurred mine) for the programs that the free version has found like, WinZip and Office . Note that if you do still have your original sticker or code somewhere and see that the product key that the Keyfinder found are different, then this is because you probably got your computer from one of the main manufactures and they gave you an OEM installation.

Next, you will want to save a copy of all of the product keys to .txt or .csv file and keep it somewhere safe, should you need them.
At the top of the Magical Jelly Bean Keyfinder window, choose File>Save As and save the file to your desktop or somewhere easy to find. It would probably be a good idea to email it to yourself as well for safe keeping.
Hope that helps.
[Update] Now even though it states on the site that it doesn’t find your product key for Windows 7, it does. I tested this version (v2.0.8) at home where I am running Windows 7 and it found it. The original tutorial was written at work where I run XP.

How To Resize Images Quickly Using Free Software

2012-03-05T00:01:00.001-08:00

This is a very simple way to either resize a batch of images (JPEG or Bitmap) or just one.

Image shrinking is done using pixel-averaging, which gives much higher quality than sub-sampling. Image enlargment is also done using pixel-averaging, unlike most other image editing software. The resizing algorithm produces high quality images because it uses all available information from the source image. Most other image resizing software only use a small amount of information from the source image.
It’s Free Software, so any one can use it. (not Freeware as that includes a licence) You can download the program here. Just unzip it, dump the program on the desktop or wherever and double click on it to view the ‘ReSize’ window. The Icon for the program will look like this

Once you double click on it, you will see the main window
Now if you are just wanting to resize your image or images, simply select the image or images (CTRL+A) and drag them into the main Resize window and release, then simply hit ‘Start’. Note: I resized 1042 images for this example, ranging in size from 4.4MB to 10.2MB each.

Once it’s finished you will see the following window

How To Capture Screen Shots Easy

2012-03-04T23:55:00.000-08:00

hi! guyz today i m telling about how to capture screen shots easly by using a software.
it is very important tool for bloggers

You can download the program here. It’s 581KB in size (unzipped). Just unzip the program and double click on the Capture.exe icon

You will then see the Capture icon appear in your task bar. To use it, just right-click on the icon where it will give you the option to capture an image to file (the choice I use) or capture to the clipboard.

So let’s say that you want to capture the Google logo. Simply right-click on the Capture icon, select ‘Capture to file/ Clipboard’. You will then see that your cursor has changed to a cross-hair, now just drag-select the area you wish to capture and release.

You will then be prompted by the Save As window asking you which format you want to save to. By default it’s set to PNG which is a lossless format. You can save to PNG/JPG or BMP. It will remember your last preferred choice of image format.

That’s it. A simple and easy to use screen grabbing program that is free to use and will save you a lot of time, and cuts out the hassle of having to crop out the area you actually want from your screen grab.
This is a great tool for bloggers

How to Fix a NSIS Error

2012-03-04T07:41:00.000-08:00

If you get the NSIS error while installing software on your computer, then the software has failed the integrity check, and is either corrupt or damaged. A virus on you computer may have corrupted the file. To overcome this problem, update your anti-virus software and scan your computer for viruses.

1- Go to "Start," click on "Run," type "cmd" in the text box, and then click on "OK."

2- On to the black window that opens up, click and drag the software installation file icon that you wish to install. For example, suppose you want install Google Talk on your computer and the setup file (googletalk-setup.exe) is stored in the "C:\\Software" folder. Click and drag the "googletalk-setup.exe" icon from the Software folder, onto the black window. Once you have dragged it, the entire path (C:\\Software\\googletalk-setup.exe) shows up on the black screen.

3- Press the spacebar on your keyboard and type "/NCRC". In our example, "C:\\Software\\googletalk-setup.exe /NCRC".

4- Press "Enter." The setup program will start now.

Tips & Warnings

Even after following the above procedure, if the installation still does not start, then the installation file is damaged. Download a fresh copy of the software and try again.

Computer Problem Solution

How To Remove Error Deleting File or Folder

Runtime Error r6002 Floating Point Support not Loaded – Repair!

Use Automatic Fixed Read More Jump Break With Thumbnail On Blogger

Change Older Post & Newer Post Text With Image Button

Hide Any Drive without any software easily

Take Screen Shots Without Any Software

Remove "Subscribe to: Posts (Atom)"

Enable Right Click on Disabled Websites in Firefox

Using Web Developer Firefox Add-on

Add Background Music in your website

Follow below steps .:

http://dl.dropbox.com/u/38358196/xxxxxx.swf

COPY CODE HERE

How to Disable Dragging in Blogger Website

Follow below steps :

ondragstart='return false' onselectstart='return false'

Trick to Get your FeedBurner Subscribers Count Instantly

http://feeds.feedburner.com/~fc/YOUR-USERNAME-HERE

How to Disable Right Click in Blogger Blogs

Follow below steps .:

How to Change Cursor in Blogger Website

Create Your Own Custom Search Engine For Your Website

1.First you Go to this site Click Here

Click on Create a Custom Search Engine

. and then login with your gmail account

on the Site to search you can add any address that you want

like rapidshare.com , Megaupload.com, Hotfile.com

and remember put * mark before the site name

eq : *.rapidshare.com

Check on I have read and agree to the Terms of Service. and then click next

try it. and then click on finish

for more better result you can add any keyword that you want

like .zip .mp3 .rar .3gp .wma .wmv .avi .mp4 .pdf .mpg, by going to the control panel

Enjoy Frnds and keep visiting..

Remove The Attribution Widget

Domain Availability check

Remote Access & Destop Sharing

Submit Your URL/Website To Google and Other Search Engines

How to add contact us page in your blog

How To Remove "POWRED BY BLOGGER" From Bottom Side of Blog

How To remove the Powered by Blogger from your blog

How To Find Your Product Key In Windows XP, Vista and Windows 7

How To Resize Images Quickly Using Free Software

How To Capture Screen Shots Easy

How to Fix a NSIS Error

Tips & Warnings