Hacking Tutorial

What To Look For In A Code Hacking Program

2010-01-19T00:42:00.000-08:00

written by Dissident

Phreaking's getting tricky these days, ain't it?
Ok, there are two groups of things a code hacker should have, the
necessities and the things that are good to have... Here are the necessities:

Mutliple ports. If you constantly try to hack from the same port (the
800/950 or whatever number that the company you're hacking from is on) you
are begging to be caught. The program should have an option to handle at
least 5 different ports. It should also be able to handle a different format
for each one if necessary. (One could require nine digits, another only 4,
another requiring a 9 before the place you're trying to call to, etc)
Multiple targets. The program should be able to handle as many
target numbers as it can ports. If everytime you try a code you go to the
same number you are, again, begging to be caught.
The ability to hack codes RANDOMLY. And when I say random, I mean going
as far as to have a different seed each time it generates a random code...
If you hack sequentially I hope you get caught.
Not only should the codes it tries be random, but almost everything about
the program should be random. It should pick a random port, with a random
target, and with a random code. Believe it or not, some companies are starting
to show some intelligence, and they're beginning to notice patterns. . .
You can't predict chaos, remember that.
The ability to stop after a certain number of tries, or a certain number
of successful codes, or at a certain time. If you let the hacker run for a
long time, you better have a LOT of ports and targets set up... Hack for
short periods of time, or for a relatively small number of tries. If you
get impatient and desperate for codes, you will make mistakes.

And now, the nice things to have.

The ability to have a random delay between the tones it dials. Humans
can't dial 11 digit numbers in .7 of a second, and the companies know that.
Humans also cannot dial with a consistent gap between each tone. If the
program puts a random time between each tone, the system will have a better
chance of thinking you're a human.
The program SHOULD be able to encrypt all of the codes it hacks when it
saves them/prints them/etc. That way, IF you get busted, you won't have so
much evidence against you. When you get nailed, they go through everything,
even if they are idiot schmucks. If your list of codes contains all 'wrong'
codes, they'll have less of a case against you.
It is also nice if the code hacker waits a random length of time between
attempts, no matter how many ports it is trying. If you're hacking random
ports, with random targets, with a random delay between digits dialed, with a
random amount of time between all of your attempts, and with a randomly
generated code, you're going to be hard as hell to catch.

And now some warnings. . .

I don't know if it is a COMMON practice, but some companies have set up
bad accounts (codes, whatever) for the specific purpose of catching whoever
tries to use it. If it doesn't belong to a real person, only a hacker would
get it.
Don't hack fast... If at all possible, dial fairly slowly. I've heard
of places that watch for extremely fast dialers.
Don't phreak to the same place with the same code constantly. I feel
that one is self explanatory.
If you're very cautious, you can always use someone else's line when you
are searching for codes. But be SURE you don't leave anything that can point
to you.
If you think there is a chance that you've been snagged, or at least
caught the attention of the Gestapo, stop phreaking. The less stuff they
have against you, the less of a case they'll have against you. Also, if you
keep phreaking, they'll sooner or later shove a printout in your face that
contains every number dialed from your phone. Don't bring everybody else down
just because you got careless.

Speaking of bringing everyone else down... I don't know if the truth has
been out yet, so I'll bring it out. There was a loser by the name of Jeremy
Hall. His common handles were "Quicksilver" and "Shells". He thought he was
hot shit. He set up many Alliance conferences, called up Voice Mailboxes
almost everyday, etc. He was about 13 years old, a little whiny brat.
Well, there was also a damn good phracker by the handle of Amadeus. Ever
wonder what happened to him? Quicksilver turned him in to save his own ass.
He also caused alot of Mailboxes to come down, and I think a few boards came
down because of his ignorance.

Just thought I'd mention that for those who knew Amadeus or Narcsilver.
(BTW-Narc:615-647-8019 724 York Road Clarksville, TN 37042

Various programs with code-hacking functions written by members of TES-

Commcracker and Coax - written by Cronus
HAMR, HAMR 2.0,HAMR128 - written by Dissident
CHOMPS under development - Cronus
CHOMPS-Amiga also under development - Dissident

All of the above except for HAMR 128 and CHOMPS Amiga were written/are being
developed for Commodore 64s... Commcracker/Coax/HAMR require 1660 modems,
the rest will work with Hayes Compats.

All mIRC Commands

2010-01-17T13:15:00.001-08:00

/ Recalls the previous command entered in the current window.
/! Recalls the last command typed in any window.
/action {action text} Sends the specifed action to the active channel or query window.
/add [-apuce] {filename.ini} Loads aliases, popups, users, commands, and events.
/ame {action text} Sends the specifed action to all channels which you are currently on.
/amsg {text} Sends the specifed message to all channels which you are currently on.
/auser {level} {nick|address} Adds a user with the specified access level to the remote users list.

/auto [on|off|nickname|address] Toggles auto-opping of a nick or address or sets it on or off
totally.
/away {away message} Sets you away leave a message explaining that you are not currently paying
attention to IRC.
/away Sets you being back.
/ban [#channel] {nickname} [type] Bans the specified nick from the curent or given channel.
/beep {number} {delay} Locally beeps 'number' times with 'delay' in between the beeps. /channel
Pops up the channel central window (only works in a channel).

/clear Clears the entire scrollback buffer of the current window.
/ctcp {nickname} {ping|finger|version|time|userinfo|clientinfo} Does the given ctcp request on
nickname.
/closemsg {nickname} Closes the query window you have open to the specified nick.
/creq [ask | auto | ignore] Sets your DCC 'On Chat request' settings in DCC/Options.
/dcc send {nickname} {file1} {file2} {file3} ... {fileN} Sends the specified files to nick.
/dcc chat {nickname} Opens a dcc window and sends a dcc chat request to nickname.
/describe {#channel} {action text} Sends the specifed action to the specified channel window.
/dde [-r] {service} {topic} {item} [data] Allows DDE control between mIRC and other
applications.
/ddeserver [on [service name] | off] To turn on the DDE server mode, eventually with a given
service name.
/disable {#groupname} De-activates a group of commands or events.
/disconnect Forces a hard and immediate disconnect from your IRC server. Use it with care.
/dlevel {level} Changes the default user level in the remote section.
/dns {nickname | IP address | IP name} Uses your providers DNS to resolve an IP address.
/echo [nickname|#channel|status] {text} Displays the given text only to YOU on the given place
in color N.
/enable {#groupname} Activates a group of commands or events.
/events [on|off] Shows the remote events status or sets it to listening or not.
/exit Forces mIRC to closedown and exit.
/finger Does a finger on a users address.
/flood [{numberoflines} {seconds} {pausetime}] Sets a crude flood control method.
/fsend [on|off] Shows fsends status and allows you to turn dcc fast send on or off.
/fserve {nickname} {maxgets} {homedirectory} [welcome text file] Opens a fileserver.
/guser {level} {nick} [type] Adds the user to the user list with the specified level and
address type.
/help {keyword} Brings up the Basic IRC Commands section in the mIRC help file.
/ignore [on|off|nickname|address] Toggles ignoring of a nick or address or sets it on or off
totally.
/invite {nickname} {#channel} Invites another user to a channel.
/join {#channel} Makes you join the specified channel.
/kick {#channel} {nickname} Kicks nickname off a given channel.
/list [#string] [-min #] [-max #] Lists all currently available channels, evt. filtering for
parameters.
/log [on|off] Shows the logging status or sets it on or off for the current window.
/me {action text} Sends the specifed action to the active channel or query window.
/mode {#channel|nickname} [[+|-]modechars [parameters]] Sets channel or user modes.
/msg {nickname} {message} Send a private message to this user without opening a query window.
/names {#channel} Shows the nicks of all people on the given channel.
/nick {new nickname} Changes your nickname to whatever you like.
/notice {nick} {message} Send the specified notice message to the nick.
/notify [on|off|nickname] Toggles notifying you of a nick on IRC or sets it on or off totally.
/onotice [#channel] {message} Send the specified notice message to all channel ops.
/omsg [#channel] {message} Send the specified message to all ops on a channel.
/part {#channel} Makes you leave the specified channel.
/partall Makes you leave all channels you are on.
/ping {server address} Pings the given server. NOT a nickname.
/play [-c] {filename} [delay] Allows you to send text files to a window.
/pop {delay} [#channel] {nickname} Performs a randomly delayed +o on a not already opped nick.
/protect [on|off|nickname|address] Toggles protection of a nick or address or sets it on or off
totally.
/query {nickname} {message} Open a query window to this user and send them the private message.
/quit [reason] Disconnect you from IRC with the optional byebye message.
/raw {raw command} Sends any raw command you supply directly to the server. Use it with care!!
/remote [on|off] Shows the remote commands status or sets it to listening or not.
/rlevel {access level} Removes all users from the remote users list with the specified access
level.
/run {c:\path\program.exe} [parameters] Runs the specified program, evt. with parameters.
/ruser {nick[!]|address} [type] Removes the user from the remote users list.
/save {filename.ini} Saves remote sections into a specified INI file.
/say {text} Says whatever you want to the active window.
/server [server address [port] [password]] Reconnects to the previous server or a newly
specified one.
/sound [nickname|#channel] {filename.wav} {action text} Sends an action and a fitting sound.
/speak {text} Uses the external text to speech program Monologue to speak up the text.
/sreq [ask | auto | ignore] Sets your DCC 'On Send request' settings in DCC/Options.
/time Tells you the time on the server you use.
/timer[N] {repetitions} {interval in seconds} {command} [| {more commands}] Activates a timer.
/topic {#channel} {newtopic} Changes the topic for the specified channel.
/ulist [{|}]{level} Lists all users in the remote list with the specified access levels.
/url [-d] Opens the URL windows that allows you to surf the www parallel to IRC.
/uwho [nick] Pops up the user central with information about the specified user.
/who {#channel} Shows the nicks of all people on the given channel.
/who {*address.string*} Shows all people on IRC with a matching address.
/whois {nickname} Shows information about someone in the status window.
/whowas {nickname} Shows information about someone who -just- left IRC.
/wavplay {c:\path\sound.wav} Locally plays the specified wave file.
/write [-cidl] {filename} [text] To write the specified text to a .txt file.

MoViEBoT #xdcc-help /server irc.atomic-irc.net

We strive to make IRC easier for you!