MEO Class IV Exam

Procedure in e-Pariksha for online application for issuance of Certificate of Competency (CoC) for MEO Class-IV

2017-10-26T15:14:00.001+05:30

The DG shipping has started online application facility to MEO Class — IV candidate through the ePariksha module. The Directorate has made it mandatory for successful candidates of MEO Class-IV to follow the above online procedure for applying for MEO Class-IV CoC with effect from 30 / 10 / 2017. Physical submission of CoC application at MMD for MEO Class - IV shall not be entertained from 30 / 10 / 2017.. The Directorate therefore prescribes the following procedure for on-line submission of CoC application, review, approval and issuance of CoC to candidates who have successfully passed their MEO Class-IV grade of engineering examination.

CLICK HERE TO WATCH IN YOUTUBE

Procedure for submission of on-line application for issuance of MEO Class-IV CoC by CANDIDATE

➢Login to account using ePariksha Login credentials
➢ Click on Certification tab and then select Fee Detail
➢ Click on pay button which will redirect to bill desk
➢Pay the fee for COC application.
➢After the payment, click on the COC Application Form
➢ Click on page 2 at the bottom of the application form.
➢Click on the submit button at the bottom of the page 2 to apply for COC.
➢Click on the Print Option to print the COC application form in case you wish to keep a hard copy of CoC application.

➢The CoC shall be dispatched by speed post and the applicant will receive a confirmatory mail including speed post tracking details.
➢In case a query is raised and application is kept on hold, answer the query satisfactorily and resubmit. The query should be answered in two working days failing which the submitted application shall be deemed to be rejected and the candidate has to apply afresh.Candidate desiring to have his EXN-45 booklet may collect the samefrom MMD as per his convenience.

Pass on this message to all your friends. You can share using the below faceboook tab. Also subscribe us on youtube to get all new updates.

DGS High Voltage Training not mandatory for COC Engineering officers and Electro technical officers

2017-10-19T11:41:00.005+05:30

High Voltage training requirements brought int by 2010 Manila convention for Engineering officers and Electro Technical Officers in both operational levels and management level is no longer mandatory. It is only mandatory for those who wish to work on HV system ships (ship with 1000V and above). All others will get their COC with the following Limitation.

"Not Valid for service on ships fitted with High Voltage (over 1000V) System"

So it is no longer mandatory for engineers to under this course and to get the limitation stamp removed from COC

This is the extract from the DG circular File No: ENG/EXAM/CIRC-25(1)/2017

The 2010 Manila Amendments to STCW 78 Convention brought in the requirement for engineer officers to undergo education and training in High Voltage (HV) systems, at both the operational and management levels. This requirement came into effect from 1st January 2017 and is applicable to all Engineer Officers and Electro-Technical Officers who work on ships. The compliance with the same was later extended by IMO for six months as majority member States were not ready with certification of their seafarers complying with 2010 amendments
The Directorate has extended the date to fulfil the requirement of undergoing training in HV systems to 1^st July 2018 vide corrigendum No.2 to EAC branch circular No.134 of 2017 dated 5.5.2017.
Subsequently, the Directorate has received several queries from various stake holders with a request for clarifying on the requirement of undergoing training in HV systems by the Engineer Officers (both operational and management level) and Electro Technical Officers.
The Competent Authority after due deliberations and on receipt of clarification from IMO has decided that no additional training on HV systems be undertaken by Engineer Officers (operational and management) and Electro-Technical Officers who do not or don't intend to, work on ships with HV systems. Hence the necessity for completion of approved High Voltage Training course by Engineer Officers and Electro-Technical officers is no more a mandatory requirement for working on board ships not fitted with HV systems. However, such Engineer Officers and Electro Technical Officers will receive Certificate of Competency (CoC) with following limitation:

"Not valid for service on ships fitted with High Voltage (over 1000V) systems".

The Engineer Officers (operational and management level) and Electro-Technical Officers with above High Voltage limitation on their CoC, preferring for deletion of the limitation in due course of time, may do so with a request for the removal of this limitation by providing documentary evidence of having undergone approved HV systems training course.
Considering the propulsion and power distribution systems onboard ships have changed substantially over the years and the current changed technology has already enabled the construction of bigger and newer ships installed with HV equipment to handle the massive power requirements and that the STCW 78 Convention, as amended, require these ships to be operated by personal competent in the safety/design/operation/ maintenance of 1-IV systems, it is advised that all operational level/management level Engineer Officers and ElectroTechnical Officers may keep their CoC valid for sailing on such type of vessels in future by completion of necessary HV training.

Urgent Notice- COC correction sticker mandatory for all Indian seafarers and how to get it

2017-05-29T03:13:00.001+05:30

This is an important notice to all seafarers holding COC. We all have upgraded/updated our COC as per the manila 2010 convention. But a major paragraph in the front page cover of our COC has not been updated as per the 2010 convention. So as per the message from DG, almost all seafarers have to correct this mistake in their COC. So DG had directed us to get the correction in our COC from the nearest MMD at our convenience. But now DG as come up with a new method to take the print of the COC correction sticker from DG website. This article explains why it is required and how to download the sticker from the DG website

As per the Circular from DG

CoC's issued by the Directorate in accordance with 1995 amendments to STCW 1978 convention have been upgraded after completion of the necessary STCW requirements by means of endorsements in the CoC's for compliance. However, notes with Regulation I/2, paragraph 9 of the Convention on the front pastedown endpaper page of the CoC's have remained unchanged.

THEREFORE, in order to prevent issues relating to Indian CoC's during Port State Control [PSC] Inspections, it is hereby directed that all Indian CoC's complying with 2010 amendments to STCW 1978 convention, the notes on the front pastedown endpaper page of the CoC is to be now read as following: "The original of this certilicate must be kept available in accordance with Regulation I/2, paragraph 11 of the Convention while serving on a ship".

8. The Mercantile Marine Departments [MMDs] are hereby directed that CoC's revalidated or upgraded to 2010 amendments to STCW 1978 convention with containing notes of "Regulation I/2, paragraph 9 of the Convention" of the front pastedown endpaper page, shall be endorsed with a stamp that "The original of this certificale musl be kept available in accordance with Regulalion I/2, paragraph I1 of the Convention while serving on a ship" in the additional pages of CoC booklet.

The same endorsement is now available as sticker in the DG website

1. Open www.dgshipping.gov.in

2. Open E-Governance

3. Login using your username and password

4. Click on tab- COC, DC Endorsement, GMDSS Radio operator

5. Click on COC correction sticker as per 2010

6. Download the sticker with your INDOS number and take print out in Photo quality using color printer on self adhesive sticker paper and paste the same sticker in additional pages of your COC

Please go through the circular from DG

Please pass on this message to all your friends. You can share using the below faceboook tab. Also subscribe us on youtube to get all new updates.

Click below tab to subscribe on Youtube

Dangerous cargo endorsement (DCE) certificate online application procedure for Oil Chemical and Gas in MMD / documents required for level 1 & 2 DC

2016-10-26T23:55:00.002+05:30

DG Shipping has taken new initiate for the processing of oil, chemical and gas dangerous cargo endorsements certificate online (DC Endorsements) for Level 1 (Operational or Basic) and for Level 2 (Advanced or management level). Now we dont have to personally visit MMD for documet submission or collecting certificate. Everything can be made online. This article defines you the step by step process for the online application.

WATCH VIDEO

CLICK HERE TO WATCH ON YOUTUBE

1) Open www.dgshipping.gov.in
2) Go to e-governance and log in using your INDOS number and password

3) Open the tab COC, DC endorsement, GMDSS Radio operator

4) Select basic (type 1 for operational level) or Advanced (type 2 for management level)

5) All your personal details will be there by default. In this page you have select MMD name type of dce required (Chemical, oil or gas), New or Renewal. Require all other details as required and press continue

6) Enter your postal adress and select you want DCE BY POST or will collect BY HAND

7)Enter the certificate details

i) AFF/basic fire fighting

ii) Ref AFF/ Ref basic fire fighting

iii) advanced/ basic tanker familiarization course

8)Enter your seatime and cargo carried

9) Next pae shows the fees to be paid

i) Rs 3000 for Basic

ii) Rs 4500 for Advanced

10) If all datas are entered, then generate the APPLICATION NUMBER. Make sure all datas are entered correctly before this step. Datas cannot be changed after this step.

11) Once the application number is generated, you can click on Pay Now link to proceed for payment. You can make payment with debit card, credit card, net banking and wallet.

12) Make payment

13) You will get the acknowledgment receipt

14) Now next step is to upload the certificates. Go to the home page and click on DC, COC endorsements as we did earlier. Now click on the link pay COC, COP fees, upload documents.

You can also pay the fees later with this link.

15) You can upload the required files from here

i) Signed application form in pdf format

ii) Photograph in jpg format as per specification

iii) Signature as per specification in pdf format

iv) Certificates in one pdf file

v) Compnay letter in pdf format

vi) old dce certificate in pdf format

vii) Self attested pdf file of CDC showing all relevant sea time

Upload the documents

16) You can see the below page with comment, Documents successfully uploaded.

17) Now you can check the status of your application by visiting the link PAY COC, COP FESS, LOAD DOCUMENTS AND VIEW STATUS link.

Once the status shows approved, you can personally collect the document from the MMD if you have selected the mode as BY HAND or you will receive by post if you have selected the mode as BY POST

GIVE US YOUR VALUABLE COMMENTS AND SUGGESTIONS. ALSO LIKE OUR FACEBOOK PAGE AND FOLLOW US ON GOOGLE TO GET ALL UPDATES. SHARE WITH YOUR FRIENDS

Latest Maritime News

2016-10-18T16:32:00.001+05:30

Cargo ship Mustafa Kan sank off sicily in mediterranean sea

DG Shipping to issue marksheet along with COC

2016-10-03T17:53:00.002+05:30

DG shipping has taken new initiative to issue the mark sheet. For the first time marksheets are being issued to all candidates of foreign going grades on sucessful completion of written and oral examination along with the Certificate of Competency (CoC) for nautical wing. Marksheet for 2nd Mate(FG), Master (FG) and 1st Mate(FG) started issuing from 1st, 19th and 30th September, 2016, respectively. Below is the notice diplayed in dgshipping official website. No message has not yet come for the engineering wing.

Follow our blog and like us on facebook to get all new updates

Ballast water management (BWM) convention to enter into force in sep 2017

2016-10-03T00:09:00.000+05:30

The International Convention for the Control and Management of Ships' Ballast Water and Sediments (BWM Convention) will enter into force on 8 September 2017. The convention stipulates that it will enter into force 12 months after ratification by a minimum of 30 States, representing 35% of world merchant shipping tonnage. Finland ratified this convention on 8th september 2016 to make the total gross tonnage to 35.1 percent and contracting parties to 52. So, after 12 months from this date, this convention will come into force on 8th september 2017.

This convention deals with halting the spread of invasive aquatic species, which can cause havoc for local ecosystems, affect biodiversity and lead to substantial economic loss. Under the Convention's terms, ships will be required to manage their ballast water to remove, render harmless, or avoid the uptake or discharge of aquatic organisms and pathogens within bal'iast water and sediments

The BWM Convention was adopted in 2004 by the lnternational Maritime Organization (lMO), the United Nations specialized agency with responsibility for developing global standards for ship safety and security and for the protection of the marine environment and the atmosphere from any harmful impacts of shipping.

From 8 September 2017, all ships of 400gt and above will be required to have onboard
- An approved Ballast Water Management plan
- A Ballast Water Record Book.
- All ships fitted with Ballast water treatment systems must have a type approval certificate in compliance with the IMO Guidelines for the approval of ballast water management systems
- An International Ballast Water Management Certificate or statement of compliance.

Master checker - seafarers personal database in dg shipping e-governance profile

2016-10-02T23:39:00.000+05:30

All the seafarers have been provided with the facility to view his or her details in the master Checker in his profile. In the Master Checker, the candidate can view all the data such as CDC details, Training details, sea service details, COC details, details of other certificates like Watch keeping, Dangerous Cargo endorsement, GMDSS etc.

It is mentioned that this data is uploaded in the system by the issuing authorities. Therefore, if there is any corrections to be made in the data or if some details are found missing, then the candidates please approach the respective authorities/agencies as under-
-INDOS database- INDOS cell
-CDC details- Respective Shipping Master
-Training details- Respective Maritime Training Institute
-COC details- Nautical or Engineering wing of DGS
-WKC/ Dangerous Cargo/GMDSS- Respective MMDs
-Sea service details- Shipping Company if Articles of Agreement is to be uploaded or RPSL if the -Form -IIIA is to be uploaded. (It is mentioned here that the RPSL cannot uploaded the data which is more than three months old).

All seafarers has to make sure that RPSL agencies, Maritime Training institutes and the Ship owners have uploaded the data regularly in time, so that the seafarer is not inconvenienced at the time of the assessment for examination or endorsements.

Explain shipping term Sheer and its purpose

2016-10-02T17:28:00.001+05:30

This article explains the terms sheer, flare and camber in ship construction and its purpose

Sheer
Sheer is the rise of the deck in a fore and aft direction. The amount of the sheer is measured vertically from a level line through the deck at the midship to the deck at the two perpendiculars.

Purpose
a) To increase the reserve buoyancy at the ends of the vessel.
b) To counter the immersion of the ends that may occur during pitching and is important particularly for smaller vessels
c) To increase the "Seaworthiness of the ship, that is amount of water coming in on deck would be reduced
d) since fore end is more susceptible to immersion than the aft end, "standard sheer is a parabolic curve with sheer twice that of sheer aft. Modern ships have straight line sheer, often in the fore body only, in some cases only over the forward one third ship's length. Sometimes, very large ships, the minimum bow height is achieved without the need for sheer, conversely, very small vessels may hve very large sheer forward and aft

Flare and its purpose

Camber and its purpose

Explain Camber in ship construction and its advantage?

2016-10-02T17:26:00.000+05:30

This article explains the definition and purposes of camber, sheer and flare.

Camber
Camber is the rise of the deck from the ships side to the centerline,

Purpose
a) to facilitate drainage of water,
b) Increase the resistance to deflection under load;
c) Standard camber is parabolic and approximately 1/50th of the breadth of the ship. Modern ships have "dog-log' camber where they are level across the deck between the hatches then dropping in a straight line to the deck at side.
d) the upper deck were to be constructed flat, the humps & hollows that occur due to welding distortion would delay complete drainage.

Flare and its purpose

Sheer and its purpose

Define Flare in ship construction and its purpose

2016-10-02T17:24:00.000+05:30

This article explains that Definition of flare, camber, sheer and thier purposes.

Flare It is the outward curvature of the shell at the forward end of the ship.

Purpose
a) It increases the reserve of buoyancy at the forward end to give better seaworthiness when pitching.
b) water is dispersed away from the ship when lightly pitching (driver deck)
c) creates it wider forecastle deck, giving more spaces for the fitting off machinery such as the windlass
d) allows it cleared up life of the anchor from the water, thuz reducing hul damage by abrasion

Sheer and its purpose

Camber and its purpose

What is the need for preferential tripping in marine electrical distribution system

2016-09-30T23:28:00.000+05:30

In marine electrical distribution system, a major consideration is that the supply of power to the switch board must be maintained, if possible. Otherwise a black out situation due to tripping of alternator breaker can endanger the safety of the vessel itself especially in restricted waters and maneouvring. The breaker therefore is to be arranged to trip instantly only in the event of fault such as short circuit. When over current is not so high, time delays with inverse definite Minimum Time relays are provided by way of preference trips which are designed to shed non-essential switchboard load. Preference trips are operated by relay set at about 110 percent of the normal full load, but with different time delays to open the breakers feeding non essential feeders such as galley load, ventilation fan, AC, etc, thereby reducing the load on alternator and saving the main breaker to trip

conditions for synchronizing of two electrical alternators (generator on parallel) on board ship

2016-09-30T23:19:00.001+05:30

Three conditions must be fulfilled before an incoming alternator can be connected to the live busbar system.
i) The voltage of the incoming alternator must be same or within acceptable limits of the busbar voltage. This to be checked from the Voltmeter.
ii) The frequency of the incoming alternator must be same or within acceptable limits olthe busbar frequency.However in practice, the incoming alternator frequency is to be kept slightly higher, i.e. synchroscope to move clockwise at a slow speed, because when it will come on load there will be drop in speed and then it will match with the busbar frequency.
iii) Phase angle of the incoming alternator must be matched with that of the busbar, indicated by the synchroscope pointer at 12'0 clock position. Which means phase angle difference between corresponding phases of incoming alternator and that of bulbar must be zero or within acceptable limits.

Explain Skin effect and proximity effect in current carrying conductor. How it effect the system

2016-09-30T22:35:00.000+05:30

Skin Effect :
When an alternating current flows through a solid conductor, the distribution of current across the cross section of the conductor found to be non-uniform and the current tends to flow around the surface of the conductor. This effect is called skin effect. It is more pronounced at high frequencies and with conductors of large cross sections. Since the inner core of the conductor is linked with larger amount of magnetic flux than the outer surface, it is having larger impedance to alternating currents than the Outer surface and hence current and current density tend to he greater in the outer surface.This reduces the effective area of section of the conductor. rherefore a hollow conductor bus is best suited and economical to transmit high current.

Proximity effect
When two conductors are placed near to each other carrying high currents. then half portion of the conductor links with more magnetic flux being nearer and the other half gets less flux linkage being further away. This causes non-uniformity of current flow across the cross-section of the conductors due to the increase in impedance in part of the conductors.

What all supplies are given from emergency generator in passenger ship

2016-09-30T22:27:00.000+05:30

The emergency source of power shall be capable of operating simultaneously for a period of 36 hours following services, mainly :
a) the ship's emergency bilge pump, if it is electrically operated
b) the ship's watertight doors, if they are electrically operated
c) the ship's emergency lights at every boat station on deck and over side, in all alleyways, stairways, machinery space, radio station, main navigating and central fire recorder equipments.
d)the ship's navigational lights
e) all communication equipments, fire detecting system, and signals
f) the sprinkler pump for fire fighting
e) the ship's daylight signalling lamps.

Emergency generator power supply in cargo ship, its location and sources of load it supply

2016-09-30T22:21:00.000+05:30

The emergency source of electric power shall be

a) located above the uppermost continuous deck;
b) readily accessible from the open deck.
c) located aft of the collision bulkhead.
d) so arranged that a fire or other casualty in the space containing the main source of electrical power and associated equipment do not interfere with supply, control and distribution of emergency supplies.
Every ship shall be provided with a self contained emergency source of electrical power which shall be so designed and arranged that it will operate at full rated power when the ship is listed 22.5° and when the trim of the ship is 10° from an even keel or any combination of or up to these limits.

Emergency Supplies

The emergency sources of electric power shall be capable of simultaneously supply the following services, including any starting current and for the following periods:

A)for a period of 18 hours, emergency lighting in

1) all service and accommodation, alleyways, staircases, exits. lifts and lift shafts.
2) In machinery space and main generating station including control positions.
3) in control station. machinery control rooms and at each main and emergency switchboard.
4) at the storage position for fireman's outfit
5) at the firepump, sprinkler pump and emergency bilge pump and at their starting positions.

B)for a period of 18 hours

1)The fire detection and fire alarm system.
2) The daylight signaling lamps, ships whistle and manually operated call points intermittently.
3) The general alarm.
4) statutory navigational instruments and aids.

C) for the period of 18 hours :-
i) the navigational lights
ii) Any fire pump and emergency fire pumps dependent upon the emergency generator . for their source of power
iii) capable of giving power to main or aux steering gear

Attention seafarers- Uploading sea service in Master Checker by RPS

2016-09-08T00:42:00.003+05:30

As per the instruction from DG shipping, recruitment and placement of seafarers (RPS) agents are required to submit the details of the sea service of the seafarers recruited/placed by them on board Indian-foreign flag ships, by the 12th of every month. Earlier so many incidents took place in which mmds refused to accept examination application from candidates since their sea service was not reflected in dg shipping website (e-governace). Therefore, it becomes imperative that the RPS entities upload complete and correct data of sea service in the e-governance system of dg shipping.

Dg told that it is clearly unfair to penalise the seafarers for a mistake on part of the RPS and decided that the RPS agencies which do not upload the data of sea service of their respective seafarers would face immediate suspension of licenses. The RPS must upload the data by twelfth of every month. If due to any technical problems, the data cannot be uploaded in the same month, then the system would remain open for another two months, thus giving three months time to upload the same. which is quite sufficient. However the RPS agents are instructed that they should not wait till last moment, but complete the uploading in the first month itself.

So it is advised to all seafarers that they should check whether their sign on and sign off date correctly entered in the data base. If it is not added, then they must inform the respective RPS agent to add the same into the database. The dates cannot be entered after a time period of three months. Since seafarers go for a contract of more than three months, they must confirm that their sign on date is entered in the data base. They can check the details in MASTER CHECKER after loging into e-governace and are advised that they should regularly check the Master checker, particularly after their sign on and sign off and ascertain whether the RPS has correctly uploaded the details in the system. If not, they may immediately bring the same to the notice of RPS concerned. In spite of the above measures, if the ,RPS fails to upload the sea service, the seafarer would be provided a facility to claim such missing sea service by uploading the relevant pages of CDC, Passport, letter in support of sea service from RPS and a self declaration on genuineness of the sea service in his profile on e- Governance.

Share with friends to make everyone aware.

Spark Erosion in bearing and shaft earthing devices

2016-09-07T22:13:00.000+05:30

Spark erosion is micro pitting related to main bearings and thrust bearings where the bearing material (HMO7 or AlSn40) is corroded by electrical sparks from the bearing shell to the main bearing journal due to electro-potential difference between the crankshaft and the bearing. Spark erosion in AlSn40 bearings may develop faster than in HMO7 bearings. micro pitting marks on the sliding surfaces of main bearings and journals might result in a slight transfer of white metal stripes to the journal and faster wear down of bearing material.

Pitting Corrosion

Without a device, voltage differences of up to 350-450 mV can be measured between shaft and bearing. It has proved that sparks are normally not generated at a voltage below 80 mV. To avoid spark erosion, the volt¬age have to be reduced to a value below 50 mV by a shaft earthing device placed on the propeller shaft close to the engine. This can most easily be done by using a solid silver track as a slip ring, and silver/graphite material as brushes. The silver track material is superior because of its low electrical resistance, and the silver/graphite brush ensures that the system is self-lubricating and self-cleaning. The strip is connected to the hull via brush system to reduce the potential between shaft and bearing.

shaft earthing device

A voltmeter is installed to ensure a continuous display of the potential difference. Readings in excess of 50 mV are a sign of worn brushes or poorly maintained brush gear and/or slip rings. The functioning of the earthing and measuring device is checked, first by releasing the earthing bushes from their contact with the shaft slip ring, which should then give a "high" voltage pulse of 100 - 400 mV, read at the meter. This indicates that the monitoring circuit is in order. Secondly, when the brushes once more are brought into contact with the slip ring, the reading should again fall below the 50 mV limit. The silver track and the silver/carbon brushes should not need any regular cleaning, but if oil is found on the track, it should be cleaned off carefully, using an electro-cleaner or similar solvent'

Notice to All Indian Seafarers from DG

2016-09-07T13:13:00.000+05:30

The below message is for all the Indian seafarers from DG shipping. DG shipping is taking strong initiative against all fraud manning agents in India. Read the below message carefully and share with your friends,

Directorate General of Shipping, Govt. of India has noted with concern, the rise in number of complaints received from seafarers who are cheated/ fleeced by unauthorized recruitment and placement agents under pretext of offering them placement on board foreign flag ships. Common problems reported by the seafarers are;

1. In an event of seafarers meeting with an accident, injury, stranding or any other mishap, the unauthorized agencies do not provide any kind of assistance for repatriation / medical aid / compensation etc.

2. Such unauthorized agencies do not provide assistance or make intervention in disputes regarding wages/compensation, arising between the seafarers and the foreign flag ship owners.

3. In case of demise of the seafarer, unauthorized agencies avoid taking up responsibility of bringing mortal remains or arranging compensation.

2. In all the above mentioned complaints, it becomes difficult for DGS, GoI to directly take up the matter with the foreign flag ships, as they do not come under its jurisdictional control. It is therefore, requested that placement through unauthorized agencies may strictly be avoided, as it may lead to complications/problems for the seafarers. It may be noted that sea service through an unregistered agency cannot be uploaded in the e-governance system of DGS and therefore will not be considered by the DGS for examination/ certification. It is therefore advised that the seafarers may get their placement on foreign flag ships only through registered placement and service agencies. List of such approved agencies is available in the website www.dgshipping.gov.in. Before considering any offer of appointment from placement agencies, you must check the website of DGS and ascertain whether such agency is registered or not.

3. There could also be a case of some fraud agency impersonating as a Registered RPSL. As a measure of precaution, before considering an offer of appointment from any Registered RPSL, you may also contact the said RPSL on telephone or by an e-mail and ascertain its genuineness. The contact details of all such registered RPSL are also displayed in the website for information.

4. The registered RPSL are required to upload the details of your sea service in the e-governance system of the DGS. Such uploaded details are visible to the seafarer in the master checker of the seafarers profile in the e- Governance system. You are advised to regularly visit the master checker and check whether the RPS has correctly uploaded the dates of your sign on/ sign off in the system in the same month to ensure that your sea-service records are up-to-date.

(Message copied from dg website)
Read and share the message with yourfriends. Like our facebook page to get all updates

Documents for Level 1 (Operational) Dangerous Cargo (DC) Endorsements for Oil, Chemical and Gas in MMDs in India

2014-02-07T16:29:00.000+05:30

The following documents are required to be produced to get the dangerous cargo endorsements for Oil, Chemical and Gas DC for Operational Level in India

a) Certificate of Competency
b) Tanker Course (Oil/Chemical/Gas + Operation LCH) OR In lieu of above 3 months sea services on respective tanker
c) AFF
d) CDC
e) PP
f) INDOS
g) Medical Certificate(ILO-147)
h) 2 nos Photographs

Documents for DC Endorsement for Management level (level 2) for Oil, Chemical and Gas DC in MMD, India

2014-02-07T16:21:00.000+05:30

The following documents are required to avail Dangerous Cargo Endorsements for Oil, Chemical and Gas DC for management level (Level 2) in various MMDs in India

Management Level (Level 2)
a) Certificate of Competency
b) SPCL TASCO/SPCL GASCO/SPCL CHEMCO
c) AFF
d) Mgmt level LCHS
e) Level I DCE
f) 3 monthssea service for type of tankers in last 5 yrs.
g) CDC
h) PP
i) INDOS
j) Medical Certificate
k) 2 nos Photographs

DG shipping new circular on procedure for application of COC

2014-02-03T13:49:00.003+05:30

Here the scan copy of the circular on new procedure for issuance of COC

Source - dgshipping.gov.in

Complete List and Address of DG Shipping approved Doctors and Medical Examiners issuing Medical Certificates for MMD for Seafarers in India

2014-02-03T02:19:00.002+05:30

Address of Dg Shipping approved medical doctors in Kandla, Jamnagar, Gujarat

2014-02-03T02:06:00.000+05:30

GUJARAT

JAMNAGAR

Sr. No.	Name of the Medical Examiners/ Year of Approval Reference No.	Full Style of Facility .	Remarks 1. Suspension etc. 2. Validity of approval. 3. Next periodical inspection due.
1	Dr. M. M. Patel Year-2001	J.M. Baxi & Company, Arihand Krupa, Near Panchavati Petrol Pump, Pandit Nehru Marg, Jamnagar-361002. Tel: (0288) 671027 / 674028 / 557130
2.	Dr. Bakulesh H. Rajyagor Year-2005	Occupational Health Centre, Reliance Industries Limited, Hazira-Surat Road, P.O. Batha, SURAT-394510
3.	Dr. Rallapalli Rajesh Year-2005	Occupational Health & Family Welfare Centre, Reliance Greens, Refinery Division, Motikhavdi, P.O. Digvijaygram, Dist. Jamnagar-361140
4	Dr. Shah Sunil P Year-2005	Clinic: Shah Hospital, Behind Janta Market-2, Opp Adarsh Market, Panchbatti, Bharuch-392001 Phone-241402

KANDLA

Sr. No.	Name of the Medical Examiners / Year of Approval Reference No.	Full Style of Facility	Remarks 1. Suspension etc. 2. Validity of approval. 3. Next periodical inspection due.
01	Dr. Gyneshwar Rao year- 2007	Clinic: Sivananda Hospital (The Divine Life Society), Post Office Road, Adipur, Kutch. Phone-02836-260577, 263245	Approval letter issued vide letter No.7-NT(5)/2007 dt 27^th March, 2012

List and address of DG shipping approved doctors for MMD medical certificates in Chandigarh, Punjab, Haryana

2014-02-03T01:56:00.002+05:30

Sr. No.	Name of the Medical Examiners / Year of Approval Reference No.	Full Style of Facility .
1	Dr. B.S. Bhatia Year-2005	Clinic: Kothi No.2103, Sector 35-C(Near Congress Office, Chandigarh Phone-0172-2600931/2661789
2.	Dr. Jaideep Singh Chadha Year-2005	Clinic: Iqbal Clinic, SGF 18, Sector -8 /B, Chandigarh-160018 Phone - Clinic - 0172 2780401
3.	Dr.Sandeep Singhal (MC Regn No.18243) Year 2010	Healthchek, K-2/4. DLF Phase 2, Gurgaon,