Mining Equipment

Gold mining equipment Placer gold separating machine

2015-05-04T06:35:00.001-07:00

Services save time and money:

1. Reply to your question among twenty four operating hours.

2. knowledgeable workers answer all of your queries in a very skilled and fluent in uk.

3. acceptable style on the market.

4. exclusive and distinctive answer are often provided to our customers with our extremely trained and skilled technicians and workers.

About The Installation

1) party A can send3 a certified and knowledgeable technicians to figure the party B to direct and guide the installation and coaching operation this hoy

2) to help in installation; Party B can originated 6-8 employees to assist these engineers.

3) installation and testing amount is predicted to require ten to twenty days.

4 a celebration of engineers) should reach the selected place to Party B among three days once the hoy had been transported to the duty website.

5) once installation is complete the hoy, party B can coordinate a celebration of engineers to check the performance of dredgers within the water consequently. Dredging dredging operations include: take a look at, hydraulic and electrical systems, run the hoy instrumentality tools, and debugging engineers ' Party A natural dredging work it.

6) employees Party B can follow the correct settings of engineers ' Party a. to make sure a swish installation of the hoy, party B shall guarantee that a celebration of engineers can come to China among three days once the hoy has been put in and tested with success.

Vibrating feeder for heavy mining equipment

2015-05-04T04:59:00.002-07:00

HYGL-Series moving feeder, that is employed to equally continuous, quantitative, or packed bulk, particles and powder materials available bin into the receiver, may be wide applied to industries like mining, metallurgy, coal, electricity, light, chemical, food then on. It will understand even feeding to device in arenaceous rock line and create rough screening for materials. moving feeders area unit wide applied in crushing and screening of combined operations within the business like science, mine, mine choice, building materials, chemicals, etc.

Gold Mining Equipment Feeding Equipment Raw ore Chute Feeder

2015-05-04T04:54:00.001-07:00

Both devices ar connected at all-time low of the bin, ore ore retailers fall onto the Board leaks at all-time low of the channel, all-time low of the leak was mounted at idler, and thru the eccentric establishments to attach the Board leaks and silencers along, so through the clutch lined bike. throughout the operation the motor drives the silencer through the clutch, and thru the eccentric dishes and plates, that leaked at all-time low of the frame still as between idler, moving reciprocal linear means, and attain uniform feed.

Indonesia coal production in 2012

2013-04-03T08:35:00.001-07:00

Indonesia coal production in 2012 is also unchanged from the previous year at 360 million tons, down from the previous estimate of 405 million tons, because the smallest miners reduce, Bob Gedlinghealthnetwork, Chairman of the Republic of Indonesia coal mining Association, aforementioned the Gregorian calendar month twenty seven.

Indonesia, Kalimantan, Awang Faroek Ishak jap Governors ar considering limiting the annual coal production to a hundred and fifty million metric tons to preserve resources and spur development of different energy.

If we have a tendency to hold a colossal production, they'll decrease additional quickly, "said Ishak, bearing on the province's coal reserves. Limitations of "intends to increase the lifetime of the mine and that we will use new and renewable energy," he said.

The province, the country's prime coal producer, is predicted to provide a hundred and eighty million plenty of coal to the ability plant this year, Isaac, told reporters at the Conference in Balikpapan Kalimantan Coal nowadays.

Indonesia, the world's largest businessperson of thermal coal and manufacturer resources embrace Tin, nickel and mineral, is making an attempt to manage the assembly of mines that aim to limit the environmental harm within the Southeast Asia's largest economy. The country illegal the export of some mineral-ore began in might, 2 years before schedule, when exports surged.

FOB Kalimantan coal prices

2013-04-03T08:31:00.000-07:00

Platts assesses daily 90-day value FOB five,900 GAR island kcal/kg at $ seventy.35/mt, up thirty seven cents on the day and FOB island five,000 GAR kcal/kg at $ fifty four.85/mt, up thirty five cents. Platts conjointly assess coal value FOB four,200 daily island kcal/kg GAR to load within the next forty five days 7-14 August-21 September, at $ corner/mt, up twenty cents.
FOB island market statement
Thermal coal costs travel higher Dutch East Indies Monday as trade sources say India and China ar shopping for flowers for Oct was slightly improved, though shoppers continuing to own the superiority within the value.

Kalimantan Steam Coal Producers

2013-04-03T08:26:00.003-07:00

Kalimantan Steam Coal Producers , South kalimantan steam coal and east kalimantan steam coal supply. Kalimantan Steam Coal coal concession are available for Joint operation, joint ventures , coal mine take over , acquisition and coal contract production for :

ADB 6300 - 6100, ADB 7000 up, ADB 5800 - 5600, Very Limited Cooking Coal Area We welcome Investors from Indonesia, Singapore, China , India , United Kingdom , United States , Australia, UEA , Kuwait, Turkey and all over the world. Invest in our project , let's your company growing fast by partnering coal mines business in Indonesia with Kalimantan Steam Coal.

Big coal machine

2012-07-14T07:46:00.000-07:00

Very simple to undermine coal. and through the previous couple of weeks, the news has been dangerous. a number of days before Christmas, at an influence plant operated by the Tennessee Valley Authority, the parent pool massive fail. in order that spills flooded concerning three hundred acres with coal ash contaminated with numerous significant metals as well as arsenic, lead, barium, chromium, and manganese. On November twenty nine, James Hansen, the NASA scientist who's high profile is closely associated with former U.S. vp Al Gore on international warming problems, sending an open letter to U.S. President-elect Barack Obama and his wife, Michelle, where he named a coal-fired power plants "death factory." While there's no doubt that different energy thereforeurces-particularly nuclear and natural gas – will offer an outsized variety of power plants and do so with way fewer carbon dioxide emissions and pollutants from coal, the matter remains one in every of scale. (Renewables are fine, however they can not offer power load-base and an outsized quantity of power required within the close to future.) however there are necessary money, structural and political constraints on various to coal. and people obstacles takes us back to a well-known question: if it's not coal, then what?

Komatsu Construction and mining equipment

2011-11-09T01:28:00.000-08:00

With several years of experience to their profile, the company has spread its wings around the globe so plenty of countries making extensive delivery and maintenance of the equipment they are simple for any client irrespective of their location. Let's have a look at a glimpse of a quantity of the equipment that circulated in various sectors of Komatsu boasts

Komatsu mining equipment company is a world leader in construction and mining equipment manufacturing. The company has played a major role in the design and manufacture of mining field large and his construction equipment with clients around the globe. After it was founded in 1921, the company has a massive selection of industrial, construction and mining machines for different types of suites of the situation. In addition to the engine, the company also has interests in other areas such as logistics, electronics, and other solutions-based operations. It's the virtue of odd quality and reliability that saw the company's products meet high safety standards thinking about the nature and the circumstances in which the equipment is used.

Construction and mining equipment

Komatsu has an array of equipment for the credit. List of construction equipment and mining are diverse including large tremendous machine able to extensive mining operations as well as simple mini units suitable for use in urban areas or in areas with limited or restricted space. This equipment comes with assorted attachments which when combined with tools to make it perform tasks as varied as all clients need to do is to replace the annex with a match depends on the nature of the job at hand.

Compact Equipment

In this sector, Komatsu introduces major utilities products. The first includes the plenty of various mini excavators and compact excavator parts counters that are useful when performing a limited area of digging in. Another major innovation in this section is a backhoe loader loader and double as an excavator. For clients who need to pick up cargo, Komatsu has a way out for you in the type of skid steer loaders. This machine is best suited for snow cleaning, farming, and loading cargo.

Forest machine

Komatsu has a series of machines that are designed for use in the forest for the purpose of mechanized logging and forwarder. In this section are also harvesting combines and other lies combi-machines and machinery traced among others.

Engines for use in factories such as forklift trucks and a immense press machine is also part of a variety of Komatsu equipment. With the new know-how of forklift trucks which come in both edges of the engine-powered and battery-powered option. The company can boast of plenty of. In the automobile manufacturing industry, giving great emphasis Komatsu as reliable as that used in the formation of the hoods and doors.

Caterpillar Inc the world's largest maker of construction and mining equipment

2011-05-31T21:28:00.000-07:00

Caterpillar posted a loss of $ 112 million or 19 cents per share, in the quarter ended in March, including the cost of the quarter for LAYOFFS of $, 558.000.000 or 58 cents per share. During the same period a year earlier, the company earned $ 922.000.000, or $ 1.45 per share.
Excluding one-time items, the Caterpillar will earn 39 cents per share, easily beating expectations with Wall Street. Analysts, on average, expect a profit of 4 cents per share on revenue of $ 8540000000, according to a survey by Thomson Reuters.
Caterpillar, a component of the Dow Jones Industrial Average, says earnings quarter down 22 percent to $ 9220000000.
This also reduces the company's projections. Now expects a profit of about $ 1.25 per share on revenues of about $ 35 billion, down from earlier projections of $ 2.50 per share on revenue of $ 40 billion. Observers predicted a profit of $ 1.77 per share on revenue of $ 39040000000.
During the quarter, stocks Caterpillar down about 37 percent, the lowest point to the quick immersion-$ 21,71 per share-in about six years.

Acquire Mining Ops From Rowan BY Joy Global

2011-05-31T21:08:00.000-07:00

Joy Global Inc (JOYG) do a definitive agreement to buy mining equipment maker LeTourneau Technologies Inc. of Rowan Cos (RDC) for $ 1.1 billion, a deal which allows to enter the market of mining and oil and gas.

S Caterpillar Inc. (CAT) $ 7600000000 deal for Bucyrus International Inc. (BUCY) late last year left the Pure Joy Global as playing only rest in the market-the surface and underground-mining equipment. The company has seen orders improvement on last quarter due to high prices of commodities such as copper and coal mine operator triggers to revive the project expansion and plans for the location of new mines stored at the end of 2008 when demand and prices collapsed.

Covenant to LeTourneau provides access to two segments of the business and its products-mining drilling. Mining products manufacturing business big wheel loader for surface mining, while product design business offshore drilling jackup drilling rig and its components to the rig.

LeTourneau recorded revenues of $ 815.000.000 in calendar 2010 and profit adjusted for $ 105 million. Joy Global expects the deal to add revenue on fiscal year 2011 and see the synergies of approximately $ 40 million in 2013.

Rowan, meanwhile, has reaffirmed its plans to sell or spin off activities LeTourneau manufacturing when the requirement to be good. Rowan first quarter profit down 50% due in part to the delivery is delayed on a one time cost LeTourneau in the business of offshore drilling.

Joy Global closed Friday at $ 87,48, while Rowan was at $ 38,04. Both active premarket. They were up 0.8% and 9%, respectively, throughout this year.

Coal Follow Oil Curve

2011-03-05T05:23:00.000-08:00

Patzek's study uses a version of a method developed by the legendary father of “peak oil” theory, Marion King Hubbert, to analyze coal reserves. Hubbert, at the time a Shell Oil petroleum geologist, used prior production history to correctly predict 15 years in advance that U.S. oil production would peak in the early 1970s.

Hubbert's method, a controversial one, assumes that production follows a bell-shaped curve over time.

When there are many different oil wells or coal mines operating independently, the sum of all their production tends to follow such a bell curve over time—starting off small, rising to a peak, and then dropping again as the resources are depleted.

Oil in the United States has followed this pattern, as has coal in the United Kingdom.

Patzek's study, “A global coal production forecast with multi-Hubbert cycle analysis,” modifies Hubbert's method to allow for several bell curves, to reflect the development of coal mines in different parts of the world and the use of different technologies.

Patzek's study is not the only one to conclude that the reserve estimates are often too high. In recent years, chemical engineers at Newcastle University in Australia, the electrical engineer David Rutledge at the California Institute of Technology, and a German nonprofit called Energy Watch Group all have estimated that coal production would most likely peak in the next couple of decades.

One of the most important questions involving the peak coal studies is what they mean for climate change policy. Patzek’s study notes that its projections would mean that carbon emissions from global coal production would decline by 50 percent by 2050. That’s significantly below most of the carbon emissions scenarios produced by the Nobel Prize-winning Intergovernmental Panel on Climate Change. Patzek’s paper opens with a swipe at the IPCC scenarios, saying they are “based on economic and policy considerations that appear to be unconstrained by geophysics.”

But the paper concludes with an appeal that climate action advocates could only applaud—a plea for using less energy and more efficient electricity generation.

“The global community should be devoting its attention to conservation and increasing efficiency of electrical power generation from coal,” the paper said. “Immediate upgrades of the existing electrical coal-fired power stations to new, ultra supercritical steam turbines that deliver [greater efficiency than current power plants] are urgently needed.”

The paper underscores the different drivers behind the push for a new path forward on energy—the call is much the same, whether the worry is too much coal or too little.

Mountaintop coal mining

2011-03-05T05:14:00.000-08:00

Mountaintop coal mining -- dubbed "mountaintop removal" by opponents -- scrapes away vegetation and topsoil, then blasts exposed rock to uncover coal seams. Leftover dirt, rock and vegetation is dumped into adjacent valleys. The practice is most heavily used in West Virginia and eastern Kentucky.

Surface mining in the Appalachian Mountains accounts for about 11 percent of U.S. coal production annually and directly employs 31,000 in the region, where another 120,000 jobs depend on it, according to industry estimates.

Miner’s Code of Signals

2010-10-06T06:34:00.000-07:00

In order to haul men and ore up and down the mineshafts safely, the hoister, or man in charge of raising and lowering the buckets and cages, had to be able to communicate with the miners below. For that purpose, a signal code using bells was adopted in each mine. Because the signal system was one of the many mining practices that came to the States from Cornwall, the codes used by the different mines were basically the same. To ensure uniformity, however, each state eventually adopted a Code of Signals in its mining regulations. The Code of Signals shown here is for the state of Colorado.

The leading mining equipment manufacturing company

2010-07-15T23:15:00.000-07:00

The leading mining equipment manufacturing company in 1998 was the Milwaukee-based Harnischfeger Industries. Harnischfeger's operations included P&H MinePro Services, which produced above-ground mining equipment and Joy Mining Machinery, which focused on below-ground equipment, as well as a pulp and papermaking machinery division. With its mining equipment sales for 1998 topping $1.2 billion, Harnischfeger controlled about 70 percent of the total market. Despite its considerable size, though, Harnischfeger had fallen on hard times. Like others in the industry, it struggled to overcome disappearing markets in Asia and Russia. Moreover, the company sought to diversify in the late 1990s, which left it dangerously overextended. Harnischfeger cut 20 percent of its work force in August of 1998. In 1999, the company was forced to enter Chapter 11 restructuring proceedings. Other key players in the industry included Texas-based Letourneau, Inc., Bucyrus International, and Svedala Industries, Inc., which manufactured mineral processing equipment, grinding mills and crushers.

Mt Arthur Coal is currently undergoing an expansion

2010-05-16T23:50:00.000-07:00

Mt Arthur Coal is currently undergoing an expansion from 15 to 20 million tonnes of coal per annum. The deposit offers the challenge of operating in a multi-seam, steeply dipping environment. Ongoing expansion in a complex environment offers outstanding candidates the ability to develop professionally in a variety of roles.

Reporting directly to Manager Shovels, your responsibilities in regard to the fleet of three P&H 4100 electric rope shovels will include designing and reviewing mining plans and activities with an eye to optimising mining efficiency, and shovel productivity.

You will also maintain history for each strip and seam pass, quantities and production rates versus actual, culminating in weekly and monthly reports as well as undertaking supervisory work as directed. Regular field visits to ensure our high quality standards and all relevant industry procedures are being followed will also be required.

The successful applicant will demonstrate sound production knowledge and operational awareness and hold a current Driver’s License.

Professional qualifications in Civil Engineering, Surveying or Mining Engineering and a NSW Coal Mine Open Cut Examiners Certificate of Competency would be highly regarded.

Supply Grinding Equipment to Kinross Gold

2010-03-27T05:12:00.000-07:00

Metso Kinross Gold Corporation in its Morro for Paracatu in Brazil's capital BrasÃlia 230km located in the South in Ouro my, perfect ball factory and related equipment and services. Delivery 2010 in June will be completed by.
Order 3 ball factory. Supply of Metso's range also plant Jack cradle, spare parts, and sites erection supervision services. Metso already this grinding circuit for one of the SAG factory and plant two balls.
Project Kinross ' total investment is approximately EUR 70 million. Kinross mine and projects in the United States, Brazil, Chile, Ecuador, the Russian and Canadian-based gold mining company. The company has approximately 5500 people worldwide. Kinross Toronto and New York Stock Exchange is listed in.

Hydraulic hoses and fittings

2010-02-08T06:14:00.000-08:00

Hydraulic hoses and fittings. An extensive range of hoses, couplings, adapters and accessories to suit most applications is also available. This range includes industrial hoses, we provide an extensive range of rubber and PVC hoses to suite automotive, chemical, petroleum and gas, air, water and materials handling as well as a range of sheet rubber products.

Additionally, we provide a wide range of hydrocracked mineral and synthetic oils for industry and heavy equipment. Drill Mining caters for all your requirements for oil, chemical and fluid containment and absorption.

Drill Mining Industry Pipe

2010-02-08T06:03:00.000-08:00

Size 80NB exercises include the mining industry offers a variety of steel threads of the case (NB 3in) to 200NB (8in NB). You can determine whether the pipe wall and heavy wall bright flush with the casing and our own thread.

Pipe used in the manufacture of thread-sensitive API (139.7 mm OD exception) and meet the requirements, is 6 m long, overall. 6 m in length to the shoulder to shoulder, you can make special arrangements for most sizes.

Exploration tenements

2009-11-13T01:39:00.000-08:00

Australian uranium explorer Toro Energy is set to acquire two additional prospective uranium exploration tenements in Western Australia, from Rhodes Resources, a subsidiary wholly owned by ASX-listed Liberty Resources.

Acquisition price of A $ 1-million will be satisfied through the issuance of five million ordinary shares of Liberty Toro, in a C $ 0.20 per share.

Toro said in a statement on Friday that the acquisition trail over Firestrike uranium discovery and potential extensions along strike in the near future about Toro's nearby Wiluna uranium project. It also took four of the uranium project is now marshalled by Toro in the growth strategy of uranium in Western Australia.

Liberty previously done two aircore drilling program at the Lake Street district. This resulted in a new calcrete hosted uranium discovery, now known as Firestrike.

Firestrike been defined in the corridors about 2.7 km and about 200 m wide, like other projects in the Toro district, occurred at very shallow depths, typically between 1 m and 5 m below the surface and with a thickness between 0, 5 m and 2 m.

Toro stated that after the acquisition is completed, which is expected around 18 November, the company will move to places included in the resource definition drilling program for the 2010 field season.

Additional drilling jobs needed to fully determine the mineralisation envelope, including sonic drilling to good geological control.

Uranium miners noted that the purpose is to determine the resources, prepared in accordance with ore reserves with the code committee, and as

Rotor Classifier KX600 mining tools

2009-10-17T00:40:00.000-07:00

Diameter Of Mill(m) Φ2.2
Speed Of Main Axes(r/min) 150-350
Capacity(t/h) 30-35
Fineness(80µm) 8%-10%
Motor Of Main Axes Type YCTL225-4B
Motor Of Main Axes Power(kw) 15
Motor Of Main Axes Adjust(r/min) 132-1320
Blower Type KXJF-No10C
Blower Speed(r/min) 1200
Blower Pressure(Pa) 2400
Blower Wind Content(㎡/h)

34996
Blower Moter Power(kw) 37

Mining Crawler Drill Rig

2009-08-18T07:48:00.000-07:00

* Custom Built Drill Rig for Mining - per customers specifications
* Mounted on HD
* 140 HP Cummins Turbo
* 4 Kawasaki Pumps
* Proportional Valves
* Remote Componsators
* 200 Gallon Hydraulic Resvoir
* 80 Gallon Fuel Tank
* 125/250 Two Speed Raineer Drill Head
* Two Cylinder Bean Injection Pump
* Moyno Water Pump
* Hydraulic Cooler
* 15% (Angle Up) and 8% (Angle Down) Mast Movement
* Note: The drill is set up to drill for a capacity of an 8" hole up to 1,500' ft estimated. It will run 8" inch odex. The dimensions of the machine, it estimated weight is about 28,000 lbs., 8' 6" wide at the widest point, 12' height, and 21' length.
* Note: This drill rig is sold, but we can custom manufacture more per customers specifications.
* FOB: NW Region, USA
* Price: Contract Manufactured to Customers Specifications

Offshore Safety Officer mining job

2009-07-13T02:03:00.000-07:00

Location: China
MODEC, Mitsui Ocean Development & Engineering Co., Ltd (MODEC) is a specialist in the field of engineering, procurement, construction and installation of floating production systems. Founded in 1968 in Tokyo, Japan, MODEC is now a world leader in the offshore oil & gas industry with key offices in Houston and Singapore, and regional offices spanning across South East Asia, South America, Europe and Africa.

Offshore Safety Officer (6 month contract)
(China, South Africa)

Responsibilities:
Advise and instruct yard on safe work practices and conditions
Conduct HSE Training
Monitor / inspect / audit to meet HSE standards and requirements
Prepare HSE reports for Project Manager
Lead in daily safety inspection
Follow up from HSE inspections

Requirements:
Minimum 5 years of relevant experience in Marine / Offshore / Commissioning
Must have excellent communication skills
Must be able to sail out and on board during tow from China to South Africa for 6 months period

Instrument Technician mining job

2009-07-13T02:02:00.000-07:00

Apply Deadline: 22 Jul 2009
Location: Batam, Indonesia
Premier is a leading FTSE 250 independent exploration and production company with gas and oil interests in the Middle East, Pakistan, the North Sea and West Africa. Within Asia we have offices and operations across Indonesia, Vietnam and Singapore.

After record operating results in 2008, the acquisition of “Oilexco North Sea Ltd” with extensive North Sea interests, long term gas supply contracts and circa US$800M of development funding in place, Premier's future outlook is very strong. For over a decade we have been acquiring new blocks, drilling wells, and delivering profitable oil and gas developments.

Operationally, Gajah Baru is currently in the final stages of the award process. This 7500 ton integrated platform will be bridge linked to a drilling platform, with product exported via a new 3.5 km pipeline to an existing trunk line. It will also act as the hub for developing several other fields over the next decade. In addition, ongoing developments in North Sumatra Block A will see three new gas fields coming on stream during 2011. Premier is also preparing for future development activities in the area as larger reserves have been identified. In Vietnam, construction work on a wellhead platform continues in Vung Tau, and discussions with potential FPSO providers are moving towards a final agreement.

Premier Oil now seeks experienced staff with strong upstream experience, good English skills and relevant qualifications. We welcome applications from Indonesian and Vietnamese staff working overseas. A market leading package is on offer to successful candidates commensurate with experience and qualifications. Please provide a comprehensive CV (English).

Instrument Technician (Test in Batam)
(Riau - Batam)

Requirements:
Candidate must possess at least a Diploma or Bachelor's Degree in Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
Majoring in Petroleum, Electrical, Mechanical, Instrumental or Chemical
Maximum 2 years experience, Fresh Graduates are welcome to apply
Minimum IPK 2.75
Required language(s): English.
Applicants should be Indonesian citizens or hold relevant residence status.
Fresh graduates/Entry level applicants are encouraged to apply.
Full-Time positions available.

For those eligible candidates the test will be held in Batam on August 7-8

" Only shortlisted candidates will be notified via phone/ email "

Please check your mail regularly !

Mining Engineer job

2009-07-13T02:00:00.000-07:00

equirements:

* Licensed Mining Engineer;
* Working knowledge in MS Office applications, Autocad/MapInfo software;
* Mining experience of at least two (2) years;
* Ability to write technical reports & conduct research on various projects;
* Willing to do field work (site visits, surveys);
* Preferably not over 35 years old.

Sheet Metal Production Machines

2009-07-13T01:59:00.000-07:00

Maxitec remains dedicated to only providing the highest quality equipment from the leading suppliers of the world. Their current range of machinery, consumables and software includes:

* Wila: Press brake tooling
* NTC: Laser cutting systems
* OEMB: Long length folders
* Trininty: Laser safety eyewear
* Prinzing: Duct working equipment
* Autopulit: Computerised polishing
* Schroeder: Folding machines and shears
* Metalix: cncKad programming software
* Versagage: Multiple function measuring device
* Gasparini: Press brakes and shears (guillotines)
* ACF: Automated corner forming eliminating welding
* Ophir: Laser CO2 optics including lenses and mirrors
* Mate: Punch press tooling and tool grinding machines
* Kuhlmeyer: Finishing, polishing and bevelling machines
* Steelmaster: Deburring, surface finishing and slag removal
* Jetcam: Advanced CNC CAD/CAM programming software
* DK Technologies: NCT3 in turret tapping tool for punch presses
* Rolleri: Press brake tooling to suit nearly all machine tooling types
* Esse A: Laser tips and nozzles, ceramics and cutting head accessories
* Autopol: Press brake offline programming software and bend simulator
* IMAC: Entry level punch press, notching and combination punch and plasma machines
* Inspecvision: Optical part inspection and scanning, ideal for quality control and reverse engineering
* Finn-Power: Turret punch presses, integrated shearing, laser, laser combination, bending and fully automated systems