ColdFusion and Stuff

PART-III
Tutorial on REST: First REST Resource(cfc)

In first part we saw a simple example on REST to start off the things. So moving forward I will give another very simple example and will explain it.

helloWorld.cfc

Every component and every function acts as a REST resource(if you are publishing them).
A new attribute in cfcomponent 'restpath' OR 'rest' defines if a component can be published as a REST resource. Either of these should be present.
Attribute 'httpmethod' should be there in cffunction tag or cfcomponent tag. 'httpmethod' in cffunction tag overrides the one in cffcomponent tag. To publish/expose a function as resource, this attribute is necessary. Valid values for this are 'GET', 'POST', 'PUT', 'DELETE', 'OPTION', 'HEAD'.
Similar to 'httpmethod', 'restpath' can also be used in cffunction tag but it doesn't overrides the value of 'restpath' in cffcomponent tag , instead it appends to it. So if you want to call this function(resource), you need to give both the restpath's in URL. Check helloWorld.cfm's second http call for clearer picture
Keeping other things simple like 'access=remote'(required for REST/WEB services) and 'returntype=string', lets see how can we call this service.

Note: After writing a cfc(at-least one) in webroot, you need to register the folder(in which that REST cfc is present) as REST application, otherwise you will not be able to call any resource. Please check previous chapter for that.

helloWorld.cfm

Considering that you registered this application with name 'IIT', the URL to access first resource(function HelloWorld) will be: http://127.0.0.1:8500/rest/IIT/HelloWorld
So to access that resource all you need to do is, use cfhttp tag and call this URL. Keep in mind that method in cfhttp tag will match to the httpmethod present in function.
Similarly to call the second Resource in cfc(function HiWorld), the URL will be: http://127.0.0.1:8500/rest/IIT/HelloWorld/HiWorld
To call this from a cfm you need to call this URL using cfhttp tag with httpmethod as get.

how the URL works:

Breaking the URL for better understading

http://127.0.0.1:8500/ - protocol//ip:port/
rest/ - Compulsary string to call a REST resource. You can change this 'rest' string in server.xml and restart the server for changes to take effect.
Examples/ - Mapping name you give to register an application using Administrator or restInitApplication method(Check next example for this) .
HelloWorld/ - RestPath to call a resource. This was given as 'restpath' attribute in cfcomponent level.
HiWorld/ - If your function also has a restpath then after giving a restpath for your component you need to give restpath for function also to call that function.

Registering a REST application in ColdFusion10

2012-02-29T19:19:00.001+05:30

PART-II
Tutorial on REST: Registering a REST application

Regitsering a REST application

To access any REST resource you need to register an application either through admin or using restInitApplication().
Registering REST application is required because ColdFusion scans for all the REST resources present in directory you registered
It is also important for you to know that you CAN NOT repeat 'restpath' for one and more resources. That is why it is a better option to create multiple apps, so that you can repeat the restpath in different applications as per your need
You should also know that change in any resource(REST cfc) of your application will need a refresh in applcation. You can refresh from Administrator or using restInitApplication()

Using restInitApplication(): You can register as well as refresh an application using this method

This function takes three attributes: restInitApplication(dir_path, mapping_name, default)

dir_path: This is absolute path of the directory where you have plcaed your REST cfc.
mapping_name: This name can be anything. But keep in mind that this name will be used URL to call any of the resources in this application. Also note that this is an optional attribute. If this attribute is not present then ColdFusion will try to pick this name from Application.cfc(this.name) applicable to this directory.
default: You can get rid of the mapping_name in URL. To do so you can set any one of the application as default. I will discuss/explain this later with an example.

If there is no error thrown, means your application has been registered successfully, so its always better to catch the error using cfcatch block
If there is already an application registered with the mapping_name and the dir_path you gave, then this function will REFRESH already registered app.
But if you will try to register another directory with already registered mapping name, you will get an error

Using Administrator: You can also register an application using Administrator

Go to Admin -> DATA & Services -> REST services
Root Path: Browse the directory which you want to register as REST application
Service Mapping: Give the name of your mapping. This name will be used in URL to call any of the resource present in this application. This is optional. If not given, ColdFusion will try to search for name in Application.cfc(this.name) applicable to that directory.
default: You can get rid of the mapping_name in URL. To do so you can set any one of the application as default. I will discuss/explain this later with an example

Application outside webroot

You can also register a directory as REST application which is not present in your webroot
To do so you have to add a mapping for that directory in ColdFusion
Then you can register using the absolute path or also using that mapping instead of absolute path.

Default application:

If you really do not like to use the application mapping name(IIT - example from previous chapter) for you REST services, there is an option available to do that. But I will personally recommend that if you are publishing your REST services in production, then you should use application mapping name to avoid conflicts and for better management.

To get rid of application name, all you need to do is, make that application as default. There are two ways to do it.

Go to Administrator->REST Services page, edit that application, check the checkbox saying default and update it.
Use below given code if you do not like to go to Admin.

This will set your application as default and to call your resource you need to hit this URL - "http://localhost:8500/rest/restpath" where restpath is the restpath of your resource.

Few points to remember using default:

Default application is given last preference when you call some resource. Let's say you have a resource with restpath: "one/two" in your default application and you have a resource: "two" in your application named as "one".

So on calling this url: "http://127.0.0.1:8500/rest/one/two", resource with restpath: "two" will be served from application: "one". But if application: "one" is not present then resource "one/two" will be served from default application.
On calling this url: "http://127.0.0.1:8500/rest/one/" (notice a forward slash in the end of url), you will get resource not found, because there is no resource with restpath: "/" in application: "one".
On calling this url: "http://127.0.0.1:8500/rest/one", it will search for resource: "one" in default application because url doesn't has a forward-slash after "one".

There can only be one default application at a time.

Refresh Application:

Once you have registered your application, you might want to change few things in your resources and want to services to reflect the effect. But there is a small hindrance in that. The time you register an application, ColdFusion loads the resources present in that application in memory, so if you are making some changes in you application, you need to tell ColdFusion in some way to refresh the application so that it can reflect the changes.
To achieve this there is a concept of refreshing an application. This can be done in two ways. One is from Administrator-REST Services page you can refresh whichever application you want. But if you want to do it right away from you code, you can use restInitApplication() function.
The same function for registering an application is also used for refreshing an application. If you are calling this function for some application but that application is already registered, then it will refresh it. So the trick is very simple. If application is not registered then restInitApplication() will register it, whereas if it is registered already, then it will refresh it.
For refreshing a default application you need not pass the third attribute("default") but for registering you need to.

Please note that using this function is not recommended in Application.cfc, it might break things. You may use this function in any cfm.

Role of Application.cfc:

If you have Application.cfc in the directory you want to register, then there are few things you might want to know.

this.name - If application name is given in application.cfc, then while registering the application mapping name becomes optional. If you will not give application mapping name then your application will be registered using the name given in application.cfc
this.restsettings.skipcfcwitherror - This is a boolean attribute. Usually if there some compilation error in any of your REST enabled cfc, then while registering you will get an error and you application will not be registered. But if this attribute is true, then even if there are errors in some cfc's, the rest of the cfc's will be published and your application will be registered successfully. Please note that if this attribute is true and all the cfc's have error then error will be thrown that no rest resource found.
this.restsettings.cfclocation - you can give comma separated list of the directory path in this attribute. While registering or refreshing an application ColdFusion will search for all the rest enabled cfc's in these directories too. Please note that in this case, cfc's in current folder will not be considered. If you want to include present directory too, you need to give value something like this: this.restsettings.cfclocation = "/myfolder, ." (notice a dot after myfolder, to include present directory)

Update/Delete an application:

To update already registered application you can go to administrator or you can use same function restInitApplication(). Lets say there is an application with path as "/myfolder" and mapping name as "app1". Now if you call this function: restInitApplication("/myfolder", "app2"), your application registered with "app1" will get updated to "app2".
Though for registration/refreshing/updation same method was used but fortunately there is a separate method for deleting the REST application :) restDeleteApplication(absolute_path). You just need to pass the absolute path of the application registered to delete it.

That will be enough for registering/updating/refreshing the REST applications. I guess so ;)

Thanks,
Milan.

Tutorial on RESTful services in ColdFusion

2012-02-21T02:54:00.001+05:30

Tutorial on REST: Introduction

Much awaited ColdFusion10(Zeus) is out with many new, interesting and challenging features. And REST is one of them. So all the developers out there who wants to switch to REST services from SOAP based web services, get your hands on ColdFusion10 Public Beta now and start with REST right away.

This tutorial is like a roller-coaster ride for REST services in ColdFusion10, which will quickly get you started with simple basics and easy examples and also it will cover all the complex techniques of this feature.

Tutorial on REST: Contents

For now to get you started here are initial few Parts, will be updating more with time.

Thanks,

Milan.

Getting Started with REST in ColdFusion 10

2012-02-21T01:57:00.000+05:30

PART-I

Tutorial on REST: Getting Started:

Background: REST services are a kind of web services which use http protocol behind the scenes. Geeks familiar with SOAP based web services must be thinking, Is this really possible (if they don't already know about REST architecture yet)? Yes, REST services uses HTTP architecture to get the work done and same way ColdFusion10 has beautifully used its component(cfc) to publish the REST services and cfhttp tags to consume them. For more information on REST architecture please go through this link.

Note - for simpler understanding, throughout the tutorial I will consider that ColdFusion is installed at "C:\ColdFusion10\" with webroot at "C:\ColdFusion10\cfusion\wwwroot\" and is running on port "8500".

Publishing

After installing ColdFusion10 and setting the webroot(either through standalone or using webserver like IIS or Apache), first step required to setup REST is write a REST enabled cfc in some folder in webroot.
Create a directory named "restApp" in webroot of ColdFusion. You can name this directory whatever you want to as this is just for your reference.
Create a cfc named as "studentHandler.cfc". You can name this cfc as anything you want. Your REST service users will not use this name untill and unless you are mentioning "restpath" at component level in your cfc. I will come to this point later

Paste code given below in this studentHandler.cfc

For those who prefers to stay independent of Administrator

Just call this function from any cfm.

First argument to "restInitApplication" function is the absolute path where you have placed your REST component(studentHandler.cfc) and second argument is the name from which you will publish your REST application. You can give your relevant Organization name in second argument.
If you didn't got any error after running this funtion, it means your application is registered successfully. That's it, first REST application published.

For those who prefers to use ColdFusion Administrator page (http://127.0.0.1/8500/CFIDE/administrator/index.cfm)

After saving this file go to Administrator --> REST services page
In Path text box give the absolute path till directory "restApp". In this example it will be "C:\ColdFusion10\cfusion\wwwroot\restApp"
In mapping text box give some logical name for the REST application you going to create, let's say "IIT". You can give your relevant Organization name. This name will be used by users in the URL
Hit register, and there you go. First REST application published.

Behind the scenes/tricks:

(these are quick tricks to know, but will covered in later parts of tutorial)

When you hit 'restInitApplication()' function, ColdFusion registers your application. You can also see that application later on in Administrator REST Services page.
When you create a REST enabled component in your webroot and register that folder, ColdFusion consider that folder as one REST application.
As many resources(cfc or functions in cfc) as you want, can be created in one application but the only thing is that restpath for these resources should not conflict with each other.
Nested REST applications are not allowed.
You can keep your application outside webroot too. For this you need to add a mapping for a directory in Administrator and then you can register this directory using absolute path or mapping(the name with which you added a mapping), both will work.
Application names are case-INsensitive.
Calling restInitApplication() for already registered application actually REFRESH that application.
Calling restInitApplication() with different mapping name(second attribute) will update the registered application with absolute path(first argument), with new name.
If you want to skip giving application mapping name, you can use 'default' feature, you can set an application as default and while consuming you can call a resource without giving mapping name in URL. Keep checking this area for this point. I will write separate post for this.
While registering an application, if application mapping name is not given, then it picks the same in the directory's(one you are trying to register) Application.cfc(this.name).

Consuming

As you saw it was damn easy to publish a REST service but consuming is a lot Easier than that. All you need to do is hit this URL: http://127.0.0.1:8500/rest/IIT/student

I hope you got the response as "foo", because this is what we returned from studentHandler.cfc in function "getMethod".

How URL works:

http://127.0.0.1:8500/ - This is a equivalent to protocol://ip:port of your server in which the REST resource is present.
/rest/ - This string 'rest' in URL is necessary to tell ColdFusion that this is a REST call. You can change this 'rest' in server.xml
/IIT/ - this is the mapping_name from which you registered your REST application.
/student/ - This is the restpath of the resource you defined in studentHandler.cfc

Consuming in cfm:

For consuming REST services in cfm file you need to call the above URL using cfhttp tag.
Run the code given below.

Just take care that the method in cfhttp call should be 'get', as it has to match the 'httpmethod' given in cfc.

How this works

By looking at the URL, ColdFusion gets to know that this is a REST call and it also gets to know that for which application this call has been made because of the mapping name present in URL('IIT' in this example)
Once we know that which application it is, we can easily get to know that which resource(cfc) has been called, because a cfc has a restpath which has to be unique for every appliction and this restpath is also included in URL('student' in this example)
Once we get to know that which cfc has been called, we match the httpmethod of cffunction with the method of the request(cfhttp). In this example for both of them we mentioned 'GET'. So by calling a get request on this resource we hit the function whose httpmethod is 'get'.
Once we know which cffunction to call, its very easy to return the response.
There is also a possibility to have more than one function in same resource with different httpmethod, So it's quite possible that on calling same URL with get request you might hit one function whereas calling 'put' you might hit another. Details about this will be covered later.

Note:Application name(mapping name from which you registered your REST app) is case IN-sensitive.