ANDROID SOLUTIONS

Nokia device via Phoenix USB Dead Flashing Solution

noreply@blogger.com (Anonymous) — Tue, 20 Aug 2013 16:42:00 +0000

How to Flash your Nokia device via Phoenix USB Dead Flashing

Make sure your device has sufficient battery power. Dead USB Flashing works when your device is OFF but needs enough battery power when flashing is done and your device ready to reboot.

Before flashing make sure that the firmware files placed into path c:\Program Files\Nokia\Phoenix\Products\RM-*** RM folder number will correspond to the RM number of your device. ex: RM-596 is for Nokia N8.

Step 1. Connect your device via USB cable and make sure it's turnd OFF. Run Phoenix software select "NO CONNECTION" as connection type.

Step 2. Click file then select "Open Product" then a window will apper, select the device model and the corresponding product code of your device. To find your Product code - press *#0000# on your dialer while your device is on.

Step 3. Select "Firmware Update" option in "Flashing" menu & press "..." button on the top-right corner of the window to select the language pack/product code you want to use on your flashing. Click on the product code/language pack that you have selected and press OK button. It will now show the Product code you have selected. Tick the "Dead phone USB flashing".

Step 4. Click on "Refurbish". Then you'll get a pop-up window, follow the instruction. If it did not work, best option is to Disconnect the USB cable from your device. Press and Hold the Power button of your device for 5-8 seconds. Once it vibrates, release the power button and immediately connect the USB cable in your device. Then you should see the flashing starts.

Step 5. After some seconds of flashing, it will pause and prompts for the same instructions as above.

Step 6. When the update process finished , a window will apper "Firmware updating succeeded ". Your device will automatically restarts when flashing is done. After that, you can safely remove your USB cable from your device

Note:- In some cases, when using a CFW , it wont says "Firmware updating succeeded" but will just say "Flashing Completed". When that happens, the device screen will show "Test mode" or "Local mode" or "Nokia Logo". You can try turn off by holding the Power button for 5-8 seconds untill it reaches the multiple vibration. Then restart your device - most of time it works after that. But if not then you have to repeat the flashing process again.

GOODLUCK

If u need any help then contact me......

Samsung Galaxy s Duos (S7562) Advanced Rooting Method

noreply@blogger.com (Anonymous) — Tue, 20 Aug 2013 13:43:00 +0000

Samsung Galaxy s Duos (S7562) Advanced Rooting Method

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Check your device model ! Settings -> About device -> Model number. If your device is a totally different model, it will not work (may even brick) !!!

This method will root your phone and will give you CWM recovery.

Requirements :

1. ODIN

2. Samsung USB Drivers

3. USB cable

4. Galaxy S Duos Phone (S7562)

5. Rooting Files

Click here for download ODINClick here for download SAMSUNG USB DRIVER

Click here for download Rooting Files

CWM-Superuser-3.1.3.zip

CWM-SuperSU-v0.99.zip

recovery.tar

Run ODIN in your pc.

Now turn on USB Debugging in your galaxy s duos.

***To do this you will need to go to Settings > then Applications > then Development >and then finally USB Debugging.***

Now switch off your device & press VOLUME DOWN+HOME+POWER BUTTON until you see display light turn on.

Now u see a warning read or ignore it and press VOLUME UP key.

Now connect your android device to your pc via usb cable & u should see Odin detect (ID:Com:***).

*****If ODIN not detect your device then install Samsung USB Driver in your pc.*****

Now select Auto Reboot & F. Reset & click on (AP or PDA) and choose The Recovery.tar file.

**Remove the back Cover of your phone you must do that **

Now click on START in ODIN.

You should see a blue bar in Downloading mode in your Galaxy S Duos.

Wait until it done.

**When it done you can see your device auto reboot & when you see the samsung logo quick remove your battery**

Now remove the usb cable from your device and reinsert battery..

Now copy CWM_Superuser / CWM_SuperSU any one file in a microsd card.

Insert the microsd card in your device & press VOLUME DOWN+VOLUME UP+HOME+POWER until u see samsung logo.

When u see samsung logo then release the keys & you should see CWM_Recovery options.

Now choose **Install Zip from sdcard** and go to sdcard & choose CWM_Superuser / CWM_SuperSU any one file & click home button & click yes & wait until it done.

When done go back and choose **roboot system now**..

Once rebooted you should find CWM_Superuser / CWM_SuperSU any one in your app drawer.

Congratulations, you have fully rooted your Samsung Galaxy S Duos (I7562)!

Samsung Galaxy S Duos (S7562) Easy Rooting Methods

noreply@blogger.com (Anonymous) — Tue, 20 Aug 2013 11:15:00 +0000

HOW TO ROOT SAMSUNG S DUOS (S7562)

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Check your device model ! Settings -> About device -> Model number. If your device is a totally different model, it will not work (may even brick) !!!

There is two methods:-

Method 1: This is a easiest & secure method just using a software called :-> UnlockRoot Pro

Method 2: This method will root your phone and will give you CWM recovery.

Method 1:

Requirements :

1. UnlockRoot Pro/free
2. Samsung USB Drivers
3. USB cable
4. Galaxy S Duos Phone (S7562)

Now install UnlockRoot Pro/free & Samsung USB Driver in your pc..
Now turn on USB Debugging in your device

USB Debugging needs to be enabled on your Galaxy S Duos. To do this you will need to go to Settings > then Applications > then Development >and then finally USB Debugging.

Check the box next to USB Debugging

Now connect ur Phone with PC using USB cable.

Now open the "unlockroot.exe" in your desktop

Now u will see a dialog box that "do you want to add a battery saver app on ur phone" u can click on yes or no according to ur need, then u will be asked to "rooted successfully & reboot ur device".

click on "yes" & ur device will be automatically rebooted & u will see a new app [ SUPERSU in ur AppDrawer ]

Ur phone is rooted now... enjoy

I think this is the easiest method & secure method of rooting ur device

CLICK HERE FOR METHOD 2

Report if any problem or u need any help.....

PRESS SHARE IF U GOT UR PHONE ROOTED!

Samsung Galaxy S4 I9500 Easy Rooting Methods

noreply@blogger.com (Anonymous) — Mon, 19 Aug 2013 08:27:00 +0000

HOW TO ROOT SAMSUNG S4 (I9500)

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Check your device model ! Settings -> About device -> Model number. If your device is a totally different model, it will not work (may even brick) !!!

Step 1:

Switch off your Samsung Galaxy S4 (I9500) and press Volume Down, Center Home, and Power button together for about 5 seconds.

Step 2:

When you see the warning screen, let go of all buttons then hit the Volume Up button to enter ODIN Download mode.

Step 3:

Connect a micro-USB cable from your Samsung Galaxy S4 (I9500) to your computer.

Step 4:

Next, download CWM recovery for your Samsung Galaxy S4 (I9500).
Also download ODIN, Samsung USB Drivers, and SuperSU Zip files.

Step 5:

Unzip ODIN and run the odin3 v3.09.exe file by double-clicking on it.
Now double-click on the Samsung USB drivers .EXE file you downloaded and install drivers.
Now unplug/re-plug the micro-USB cable to your phone. You should see ID:COM detect your Device.

Step 6:

Now, click AP & (choose downloaded PDA file) or browse to the CWM recovery you downloaded for your Galaxy S4. (It’s a file ending in .tar)
Now Hit Start to begin Flash CWM Recovery to your phone.

This will flash a CUSTOM CWM Recovery to your Samsung Galaxy S4 and your phone will reboot automatically.
If you see “PASS!” that means everything went successfully..

Step 7:

Now, after your phone reboots, copy the SuperSU zip file to anywhere on your Samsung Galaxy S4.

Step 8:

Switch off your Samsung Galaxy S4 then press Volume Up, Center Home, and Power buttons together.

Step 9:

When you see the Samsung logo, keep holding down Volume Up and Center Home buttons but let go of the Power button.

Step 10:

Once in CWM Recovery, choose “install zip from sdcard” and hit the "Power button".

Step 11:

Choose “0/” directory and hit the "Power button".

Step 12:

Browse and find the SuperSU zip file you copied and hit the "Power button".

Step 13:

Choose “Yes” and hit the "Power button".

Step 14:

This will install su binaries and SuperSU superuser app on your phone. This essentially “roots” your Galaxy S4.

Step 15:

Now go back to main menu and choose “reboot system now”, then hit "Power button". Your Samsung Galaxy S4 will reboot.

Step 16:

Once rebooted, you should find SuperSU app in your app drawer.

Step 17:

Run the SuperSU app once and update the binaries.

Step 18:

You can verify you have full root by downloading and opening rooted app like Titanium Backup app.
You should see a Superuser request window pop-up!

Done

Congratulations, you have fully rooted your Samsung Galaxy S4 (I9500)!

Report if any problem or u need any help.....

PRESS SHARE IF U GOT UR PHONE ROOTED!

Samsung Galaxy Star (S5282) Easy Rooting Methods

noreply@blogger.com (Anonymous) — Sun, 18 Aug 2013 21:12:00 +0000

How to Root Samsung Galaxy Star (S5282)

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Before you can root, makesure you do all of the following:-

USB Debugging needs to be enabled on your Galaxy Star Duos. To do this you will need to go to Settings > then Applications > then Development >and then finally USB Debugging.

Check the box next to USB Debugging

Download the following file:

S5282_root_update.zip

KEEP IN SD CARD DIRECTLY NOT IN ANY FOLDER

then reboot ur device in recovery mode...

HOW?

HOLD - VOLUME UP + HOME BUTTON + POWER BUTTON Till u get in the recovery mode.

then using The VOLUME BUTTON scroll "up-down"

select - apply update.zip from sd card

scroll down using volume down - select S5282_root_update.zip file..

then select - YES

And done ur phone is rooted!!

Reboot ur phone.....

ANDROID SOLUTIONS

Nokia device via Phoenix USB Dead Flashing Solution

How to Flash your Nokia device via Phoenix USB Dead Flashing

Make sure your device has sufficient battery power. Dead USB Flashing works when your device is OFF but needs enough battery power when flashing is done and your device ready to reboot.

Before flashing make sure that the firmware files placed into path c:\Program Files\Nokia\Phoenix\Products\RM-*** RM folder number will correspond to the RM number of your device. ex: RM-596 is for Nokia N8.

Step 1. Connect your device via USB cable and make sure it's turnd OFF. Run Phoenix software select "NO CONNECTION" as connection type.

Step 2. Click file then select "Open Product" then a window will apper, select the device model and the corresponding product code of your device. To find your Product code - press *#0000# on your dialer while your device is on.

Step 5. After some seconds of flashing, it will pause and prompts for the same instructions as above.

Step 6. When the update process finished , a window will apper "Firmware updating succeeded ". Your device will automatically restarts when flashing is done. After that, you can safely remove your USB cable from your device

GOODLUCK

If u need any help then contact me......

Samsung Galaxy s Duos (S7562) Advanced Rooting Method

Samsung Galaxy s Duos (S7562) Advanced Rooting Method

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Samsung Galaxy S Duos (S7562) Easy Rooting Methods

HOW TO ROOT SAMSUNG S DUOS (S7562)

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

USB Debugging needs to be enabled on your Galaxy S Duos. To do this you will need to go to Settings > then Applications > then Development >and then finally USB Debugging.

*Check the box next to USB Debugging*

click on "yes" & ur device will be automatically rebooted & u will see a new app [ SUPERSU in ur AppDrawer ]

Ur phone is rooted now... enjoy

I think this is the easiest method & secure method of rooting ur device

CLICK HERE FOR METHOD 2

Report if any problem or u need any help..... PRESS SHARE IF U GOT UR PHONE ROOTED!

Samsung Galaxy S4 I9500 Easy Rooting Methods

HOW TO ROOT SAMSUNG S4 (I9500)

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Check your device model ! Settings -> About device -> Model number. If your device is a totally different model, it will not work (may even brick) !!!

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

Step 7:

Step 8:

Step 9:

Step 10:

Step 11:

Step 12:

Step 13:

Step 14:

Step 15:

Step 16:

Step 17:

Step 18:

Done

PRESS SHARE IF U GOT UR PHONE ROOTED!

Samsung Galaxy Star (S5282) Easy Rooting Methods

How to Root Samsung Galaxy Star (S5282)

Note - I am not responsible for any damage , brick , etc to your device - it is only for person who have done this earlier and who are curious to play with their phone. Rooting voids WARRANTY but U can always Unroot.....

So , those who want to root their device , go ahead and enjoy.....

Before you can root, makesure you do all of the following:-

USB Debugging needs to be enabled on your Galaxy Star Duos. To do this you will need to go to Settings > then Applications > then Development >and then finally USB Debugging.

*Check the box next to USB Debugging*

Download the following file:

S5282_root_update.zip

**KEEP IN SD CARD DIRECTLY NOT IN ANY FOLDER**

then reboot ur device in recovery mode...

HOW?

Report if any problem or u need any help..... PRESS SHARE IF U GOT UR PHONE ROOTED!

Check the box next to USB Debugging

Report if any problem or u need any help.....

PRESS SHARE IF U GOT UR PHONE ROOTED!

Check the box next to USB Debugging

KEEP IN SD CARD DIRECTLY NOT IN ANY FOLDER

Report if any problem or u need any help.....

PRESS SHARE IF U GOT UR PHONE ROOTED!