Internet Explorer Support

How To Modify Cache In Internet Explorer

2012-02-11T07:40:00.001-08:00

In computer science, a cache is a collection of data duplicating original values stored elsewhere or computed earlier, where the original data is expensive to fetch (owing to longer access time) or to compute, compared to the cost of reading the cache. In other words, a cache is a temporary storage area where frequently accessed data can be stored for rapid access. Once the data is stored in the cache, it can be used in the position by accessing the cached copy rather than re-fetching or re- computing the original data.

Your cache on your computer stores pages from this site in memory. When you request a page, your computer loads the page from memory and not the most recent copy from our web site. This can cause problems when viewing your account.

To modify your Cache so that your browser loads the most recent copy of a page, please read these steps carefully.
1. Click on Tools,
2. Click on Internet Options...,
3. Click on the General tab,
4. Under the Temporary Internet files section, click the Settings... button,
5. Click Every visit to the page,
6. Click the OK button,
7. Click the OK button in the Internet Options window,
8. Reload the page.

How To Troubleshoot Runtime Error in Internet Explorer

2012-02-10T08:47:00.000-08:00

Error message: Runtime Error!! Program: c:\Program Files\Internet Explorer\iexplorer.exe. This application has required the runtime to terminate in an unusual way.
You can cure this malfunction by knowing that it is caused by a conflict with a (possibly corrupted) installed Add-on. In each and every of my caller’s instance, it was the Google foolbar – so that’s the place to start your troubleshooting after this troubleshooting you can increase internet speed.
The quick-and-dirty solution is to go into Add/Remove Programs and uninstall/re-install the Google foolbar, but the way to be sure – or, if you’re getting this error and don’t have the Google toolbar – is to disable add ons one at a time until the problem goes away.

1) In IE, click on “Tools”, then select “Manage Add-ons”, and then “Enable or Disable Add-ons”, as shown above.
2) A list of installed Add-ons will appear. Start by looking for “Google foolbar Helper”. Select it, and then click on the “Disable” button.
3) Close, and restart Internet Explorer, and surf normally for a while. If you no longer get crashes and error messages, you’ve found the culprit. An uninstall/re-install is now in order (if you want to keep the toolbar, that is).
If you continue to get crashes, repeat the Steps and disable one more Add-on.. until you find the right one by process of elimination.

How to setup multiple home pages in IE

2012-02-03T07:58:00.000-08:00

Adding more than one site to your start up home pages in IE is also super easy! Basically, go to the site you want to add and then click on the down arrow next to the Home Page icon in IE that’s to the right hand side

When you click on that, you’ll get the option to change your current home page to the new page or to simply add this webpage to your home page tabs.

Obviously, choose the second option and now you’ll get multiple tabs appear when you start up Internet Explorer also!

Remember to be judicious with this feature as it can be very annoying since every time you click on the Home Page button, all of the sites you specified will open up in different tabs! I would suggest a maximum of 3, with 2 probably being the best. Enjoy!

How to Fix an Internet Explorer DNS Error

2012-02-02T07:16:00.000-08:00

Instructions:-

Open your Internet Explorer browser. It doesn't matter what page your browser opens to as long as it is open.
Click on the "Tools" option at the top of your Internet Explorer screen. Next, click on "Internet Options," followed by "Security Tab." In the Security Tab, click on the "Custom Level" tab located at the bottom of the screen.
Check the "Medium" security level drop down box once on the "Custom Level" screen. You will also need to browse through the options, find the setting "Access Data Across Domains" and put a check in that box to enable the feature. Finally choose the "Apply" option and the exist the program.
Close and reopen your Internet Explorer browser and try to navigate to a website. You should now be able to load pages. If it is still unable to load, try restarting your computer, as some changes don't always take effect immediately upon applying them

How To Fix Urlmon.dll Errors

2012-02-01T07:47:00.001-08:00

Purpose of Urlmon.dll
Urlmon.dll is an important file that is required by applications when they perform OLE (Object Linking and Embedding) operations.
Is it safe to remove urlmon.dll?
No, do not remove the urlmon.dll file. If you remove this file, applications, such as Internet Explorer that require OLE will not function properly.
Urlmon.dll causes Internet Explorer to shutdown on Windows XP computer
Issue
When using Internet Explorer on a Windows XP computer, the Internet Explorer closes and you get an error message that refers to the urlmon.dll file.
Recommended Solution
You may fix this problem by removing the security update KB942615. To do this, perform the following steps:

Click Start, click Control Panel, and then double-click Add or Remove Programs to open its corresponding window.
Select Security Update for Windows XP KB942615 and click Remove.
Restart your computer.

Note: If you find it difficult to ensure complete uninstallation using Add or Remove Programs, you may use a more efficient third-party tool, such as Perfect Uninstaller to perform the removal.
Urlmon.dll causes Internet Explorer 8 to shutdown on Windows Vista computer
Issue
While opening certain websites in Internet Explorer 8 on a Windows Vista computer, the Internet Explorer shuts down and an error message appears that points to urlmon.dll.
Recommended Solution
The above issue may resolve if you clear the restricted Websites list. To do this, perform the following steps:

Open Internet Explorer, navigate to the Tools menu and click Internet Options.
On the Security tab, click the Restricted Sites icon to highlight it, and then click the Sites button.
Select all Websites present in the list one by one and click the Remove button each time to remove the websites from the list.
After you have removed all the websites, click the Close button.
Next, click Apply and then click OK.

Urlmon.dll error in Windows XP when Windows starts
When you start your Windows XP computer, you receive the error listed below:
"STOP: c0000221 {Bad Image Checksum}
The image urlmon.dll is possibly corrupt. The header checksum does not match the computed checksum"
Recommended Solution
This error may occur if the copy of the urlmon.dll on your system is either corrupt or missing. To repair this urlmon.dll error, perform the following steps:

Insert the Windows XP installation CD in the CD-ROM and reboot your XP computer from the CD-ROM.
Press the R key to start Recovery Console, when Welcome to Setup screen appears.
Log in with administrative rights.
Next, type the following commands at the Command Prompt and press Enter after each command to run it -
cd C:\windows\system32
ren urlmon.dll urlmon.bak
expand F:\i386\urlmon.dll C:\Windows\system32
Next, type exit and press Enter to exit command prompt.
Finally reboot your computer.

How To Modify Cache In Internet Explorer

2012-01-31T06:50:00.001-08:00

How to Enable Cookies in Internet Explorer 8

2012-01-30T07:32:00.000-08:00

Cookies are pieces of information that are stored by your computer to remember aspects of your visit to our website. We use cookies to help us provide you with better service by personalizing your visit.

You will not be able to complete a purchase, or take advantage of certain features if your web browser is set to refuse cookies from our website.

Here are basic instructions for adjusting your browser to allow cookies. If the browser you use is not listed, please consult your documentation or online help files within your browser window.

If you are unsure of what browser version you have then open your browser, click on help, and click the "About" option.

Steps To Enable Cookies Internet Explorer 8.x

1. Click on the Tools-menu.
2. Select Internet Options in the menu - a new window opens.
3. Click on the Privacy tab near the top of the window.
4. Click on the Default button of the window.
5. Move the slider so that it is on one of the levels below Medium High (including Medium, Low, Accept All Cookies).
6. Save changes by clicking OK.
7. You should be able to add items to your shopping cart now.

How to Disable Flash Ads in Internet Explorer

2012-01-27T13:36:00.000-08:00

Flash ads in web pages can be annoying and can disrupt your browsing experience. Worse, Flash pop-up ads cannot be disabled by most pop-up blockers. Fortunately, Flash ads can be disabled by simply changing the settings in Internet Options. This method also disables all Flash-based games and videos from operating in Internet Explorer. However, the changes can be very quickly and easily reversed if you would like to access these web resources.

Instructions

Open Internet Explorer and click Tools > Internet Options.
Click the Programs tab. At the bottom of the dialogue box, click "Manage add-ons." In the Show field, click "Add-ons currently running in Internet Explorer."
Scroll down until you see "Shockwave Flash Object" and select the entry. Under Settings, click the radio button next to "Disable" to disable the ActiveX control in Internet Explorer. Don't delete the ActiveX control which operates Shockwave Flash Objects. Doing so will cause Internet Explorer to prompt you to install the Flash player every time you load a page which has Flash content. Also, you will have to download Flash and reinstall it to be able to use desirable Flash content in your web browser.
Click "OK." Click "OK" again to close Internet Options.
Close Internet Explorer and then restart the program. Navigate back to the website which had the Flash animated and pop-up ads. You should now be able to browse the site without these ads. Stationary HTML-based ads will still appear on the site.
Reenable the Shockwave Flash Object Add-on whenever you would like to enjoy a Flash-based game or video in Internet Explorer. To do this, click Tools > Internet Options and select the Programs tab. Click "Manage add-ons." In the menu next to "Show:" click "Downloaded ActiveX Controls (32 bit)." In the list marked "Disabled" click "Shockwave Flash Object." Click the radio button next to "Enable" and click "OK" twice to close Internet Options. Don't forget to disable it again when you're finished with your Flash game or video.

Source:-http://www.ehow.com/how_4465271_disable-flash-ads-internet-explorer.html

How to Block a Website in Internet Explorer

2012-01-27T13:32:00.000-08:00

Blocking websites in Internet Explorer comes in handy when children are surfing the Web on your computer. Block websites you don't want them to access, and rest assured when you are away from the computer when they are using it.

Instructions

Open Internet Explorer. Click on the "Tools" tab and select the "Internet Options" tab.
Click "Content" and select "Enable" found under the title "Content Advisor."
Disable the website. From the "Content Advisor," click on the "Approved Sites" tab and enter the URL of the website you wish to block. Click the "Never" tab and submit the change by adding a password you will be able to remember easily.

Source:-http://www.ehow.com/how_2178367_block-website-internet-explorer.html

How to Enable JavaScript in Internet Explorer

2012-01-27T08:04:00.000-08:00

Follow the steps below to enable JavaScript in Internet Explorer

Step 1

Access Internet Explorer by opening it up on your computer. If it isn't already installed, visit the Microsoft Web site to download the latest version (see Resources below).

Step 2

Go to 'Tools' on the task bar and click on it.

Step 3

Select the 'Internet Options' heading.

Step 4

Locate the tab labeled 'Advanced' and click on it.

Step 5

Scroll through the list of settings until you see the 'Java' category.

Step 6

Use your mouse to place a check in the box beside the only setting option under 'Java.' This setting option is 'Use JRE 1.5.0_05.'

Step 7

Click 'OK.'

Step 8

Re-start your computer. Your computer must be re-started in order for the change you just made to take effect.

How to Fix Corrupt Internet Explorer 8

2012-01-26T07:44:00.000-08:00

Internet Explorer 8 is a reliable Web browser created by Microsoft. However, it may experience stability problems or crashes because of damaged or corrupted files or incomplete registration information. Internet Explorer is an integrated part of the Windows operating system, and therefore you may need to update your operating system to resolve the problem. If updating does not resolve the problem, you may need to reset Internet Explorer to original factory settings, or uninstall and reinstall the browser.

Instructions

Install the Latest Windows Update

Go to the "Start" menu and "All Programs" in Vista and Windows 7. Look for "Windows Update." Click it. For XP users, go to the Microsoft Windows Update website (the link is in Resources).
Click "Install Updates"; in XP, click "Express Install," and then "Install."
Reboot the computer when updates have completed.

Reset Internet Explorer Browser Settings

Go to the Start menu. Go to "Control Panel." In Windows XP, click "Internet Options." In Vistaand Windows 7, click "Network and Sharing Center." Look in the left-hand pane, at the bottom, for a link that reads "Internet Options." Click it.
Click the "Advanced" tab in the dialog window that appears.
Click the "Reset" button under "Reset Internet Explorer Settings."
Read the warning. Click "Reset" in the confirmation window.
Restart Internet Explorer.

Uninstall Internet Explorer

Go to the Start menu. Go to "Control Panel."
Click "Add or Remove Programs" for Windows XP. In Vista, click "Programs"and"UninstaaProgram"; click "View Installed Updates" in the Tasks pane.In Windows 7, click "Programs" and "Uninstall a Program"; then click "Turn Windows Features On or Off."
Click "Windows Internet Explorer 8" in XP; click "Remove." In Vista, locate "Windows Internet Explorer 8" and double-click it. In the "Uninstall an Update" box, click "Yes."In Windows 7, locate "Internet Explorer 8," and clear the check in the box. At the confirmation window, click "Yes."
Follow the instructions in the uninstall wizard.
Reboot the computer.

Reinstall Internet Explorer

Go to the "Microsoft: Internet Explorer 8" link in Resources.
Click the "Download Now" link.
Follow the Internet Explorer 8 Install Wizard instructions.
Reboot your computer.

Source:-http://www.ehow.com/how_6022628_fix-corrupt-internet-explorer-8.html

How To Fix Script Errors In Internet Explorer ?

2012-01-25T10:41:00.000-08:00

Method 1: Disable script debugging

If the only sign of a problem is the error message, and Web sites are working, you can probably ignore the error. Also, if the problem only happens on one or two Web pages, it might be a problem with those pages. If you decide to ignore the errors, you can disable script debugging.

Note If this problem occurs on more than one or two sites, do not disable script debugging. Go to method 2 now.

To turn off the Scripting Debugger in Internet Explorer 6, follow these steps:
1. On the Tools menu, click Internet Options.
2. On the Advanced tab, click to select the Disable script debugging check box. and then click OK .

To turn off notification about every script error in Internet Explorer 7, follow these steps:

1. On the Tools menu, click Internet Options.

2. On the Advanced tab, click to clear the Display a notification about every script error check box, and then click OK.

Method 2: Test a Web page from another user account, another browser, and another computer:-

Use another user account, another browser, or another computer to view the Web pages that triggered a script error to determine whether the problem persists. If the script error persists, there may be a problem with the way the Web page is written. You can probably ignore the error and disable script debugging as described in method 1.

If the script error does not occur when you view the Web page from another user account, browser, or computer, the problem may be caused by files or by settings on your computer. Go to method 3 to continue to troubleshoot.

Method 3: Verify that Active Scripting, ActiveX, and Java are not being blocked by Internet Explorer:-

Active scripting, ActiveX, and Java are all involved in shaping the way information displays on a Web page. If these are blocked on your computer, it may disrupt the display of the Web page. Reset the Internet Explorer security settings to make sure these are not blocked. To do this, follow these steps:

1. Start Internet Explorer.
2. On the Tools menu, click Internet Options.
3. In the Internet Options dialog box, click the Security tab.
4. Click Default Level.
5. Click OK.

Note ActiveX controls and Java programs are turned off at the High security level in Internet Explorer.

Try to open a Web page where you previously received a scripting error. If you do not receive the error, the issue is resolved.

The Best Tips to Remove Runtime Error 153 Immediately

2012-01-24T08:01:00.000-08:00

Does runtime error 153 appear on your computer frequently? Are you searching for a perfect solution about how to remove run-time error 153? Well, just take it easy, you are not the only one who encounters such error issue. Fortunately, there there some easy steps you can take to remove runtime errors immediately.
Most of the run-time errors are always caused by problems in the Windows registry, where the runtime files are located. Specifically, runtime error 153 originates in the Office applications on your computer. You receive run-time error 153 when you automate Office applications. The whole error message must be: Run-time error '153': ActiveX component can't create object.

First step to remove runtime error 153 - Remove virus on your computer.
Are you sure your computer is free from virus? Some virus would destroy application files and he relevant registry to achieve their vicious purpose. The office applications can not be automated properly because of the virus hidden in your computer. Therefore, you should install a protection program to be the bodyguard for your PC. It is a nice way to remove run time error 153 effectively.
Second step to remove runtime error 153 - Re-register Office applications one by one.
You can try to re-register all of the Office applications on your PC. That can help you correct the wrong Windows registry of those applications in order to remove such runtime issue. For instance, to re-register Microsoft Office PowerPoint, you should click "Start"--"Run" and then type in C:Program Files/Microsoft Office/Office/PowerPoint.exe /regserver and press OK. Of course, if you are not familiar to edit and re-register the registry, you also can uninstall and download Office applications from the Internet then reinstall them again. However, I think that is really a time consuming way to remove runtime problems.
Third step to remove runtime error 153 - Scan and clean registry errors.
Frankly speaking, more than 85% run time errors are related to Windows registry errors including run-time error 153. Corrupted registry is one of the common causes of run-time errors. Therefore, it is highly recommended that you should clean registry errors regularly. A great registry repair tool can help you not only re-register Windows registry but also detect and fix registry errors professionally to speed up your computer.

Source:-http://www.hicow.com/windows-registry/run-time-computing/error-message-2249550.html

How to Fix Internet Explorer When It Is Opening Automatically

2012-01-23T10:26:00.000-08:00

Internet Explorer may begin opening windows automatically due to bad settings, damaged software or malware installed on your computer. If Internet Explorer is opening windows automatically, it may be difficult to reach other functions of your computer in an effort to repair the problem. Since there are various different causes for this problem, there are also a number of solutions.

Instructions:-

Disconnect your computer from your Internet connection. The easiest way to do this is simply to unplug the cable before starting the computer. If your Internet connection is wireless, disable your wireless card. Once your computer is disconnected, restart it. This may stop Internet Explorer from automatically opening windows on a temporary basis while you troubleshoot the problem.
Start your computer in Safe Mode if Internet Explorer is still opening windows that prevent you from troubleshooting. To start in Safe Mode, shut your computer off. Turn it on and immediately begin pressing the F8 key about once a second until you see a menu. Your mouse won't work, but your arrow keys will. Highlight "Safe Mode" and press Enter. Do not choose "Safe Mode with Networking."
Open the Control Panel. In Windows XP, you can reach the Control Panel by clicking "Start" and choosing "Control Panel." Open "Internet Options." On the "General" tab, click "Delete Cookies." Click "Delete Files" and choose to delete offline content. On the Security tab, click "Default Level" for your Internet zone. On the "Privacy" tab, click "Default." Check "Block pop-ups" and click "Settings." Click "Remove All" and "Close." On the "Programs" tab, click "Manage Add-ons." Disable any add-ons (if you find that an add-on has caused the problem, you may remove it and leave the other add-ons enabled). On the "Advanced" tab, check "Reuse windows for launching shortcuts." Click "OK."
Open "Security Center." Set "Firewall," "Automatic Updates" and "Virus Protection" to "On." Note whether your virus protection is up to date. Reconnect to the Internet and see if the problem persists.
Repair Internet Explorer if possible. The repair process may require either your original Windows installation disk or a copy of the Windows installation files on your hard drive. Most major computer manufacturers provide you with one or the other. Once you've completed the repair process, restart your computer and test to see if Internet Explorer no longer opens windows automatically.
In Windows Vista, open the Control Panel. Choose "Internet Options." On the "Advanced" tab, click "Reset." Click "OK." This option may also be available under Windows XP, depending on your version of Internet Explorer. If so, try it before using the separate instructions for repair under Windows XP.In Windows XP, click "Start" and choose "Run." Type in "sfc /scannow" without the quotes.Click OK. If you are prompted for your installation disk, provide it.

How to Make Internet Explorer 7 the Default Browser

2012-01-23T10:08:00.001-08:00

Set Internet Explorer 7 as your default browser via the browser

1. Open Internet Explorer 7.
2. Click on Tools then Internet Options from the Internet Explorer 7 toolbar.
3. Click on the Programs tab within the Internet Options window.
4. Click on the Make default button within the Default web browser section of the Programs tab.
5. Place a checkmark next to the Tell me if Internet Explorer is not the default web browser text if you want to be notified that another browser has been set as your default browser.
6. Click OK to save your changes.

Set Internet Explorer 7 as your default browser via the Control Panel in Windows XP

7. Click the Start button in the lower left of your screen.
8. Open your Control Panel.
9. Click on Internet Options.
10. Click on the Programs tab within the Internet Properties window.
11. Click on the Make default button within the Default web browser section of the Programs tab.
12. Place a checkmark next to the Tell me if Internet Explorer is not the default web browser text if you want to be notified that another browser has been set as your default browser.
13. Click OK to save your changes.

How To Easily Fix The Error 403 in internet explorer

2012-01-20T09:02:00.000-08:00

When browsing the internet, are you receiving an error 403 message? The error is usually displayed in your web browser and the message is self explanatory, the page you are trying to access is forbidden.

What causes the Error 403?

A third-party program: download accelerator, firewall or anti-virus is preventing you from connecting to a particular site.
A windows update site control, which is usually installed on your computer, may be corrupt or is missing.
The system host file may be missing or not properly configured.
Files needed for Internet Explorer to work may be damaged or missing.

How you can fix the error 403
1. Disable any recently installed programs. The programs I am referring to here are the programs mentioned above: accelerators, anti-virus and/or firewall. You may want to disable each one individually and test the page. If you disable all of them at once and it fixes the problem, you won’t be able to tell which one was causing the issue. But, by disabling each one and testing you may be able to narrow down the culprit program.

This can be done automatically by downloading the following tool: Perfect Uninstaller
2. Reset Host file to default. If you develop websites and are constantly updating this file, it’s possible that you added settings that is causing your current issue. A suggestion here is to reset the host to it’s original configuration. You may want to make a copy before reverting to the original settings. You may want to refer to these settings later or individually add them to the new host file. Follow this Microsoft article, http://support.microsoft.com/kb/972034 and click the Fix Me option. This will set the host file back to it’s default settings.
However, doing these 2 things may help, it isn’t a guaranteed way of fixing this error. To guarantee a fix, you’ll have to repair the reigstry. Here’s how to do it:
Repair your Registry. Some or the problems you experience with this error could be a result of damaged files needed for Internet Explorer to run properly. These files are typically found in the registry. PC Technicians may occasionally fix this manually by entering the registry and reconfiguring needed files. We don’t recommend this, especially if you don’t know your way around this area. Seasoned pros have been known to mess up this area, leaving a non-working computer.
The other option, the safer and more trusted method would be to run a system utility, called a registry cleaner. It is designed to hunt down corrupt or invalid files and run automatic repairs. This includes system files used by Internet Explorer. You will have less headaches since the file does the work for you and it saves you a ton of time.
Why don’t you take a look at this registry cleaning software? Visit: Registry Cleaner
I can’t stress this enough, but always make a copy of your registry. Backing up your registry can save you a ton of headaches, especially if you experience problems. It’s just a matter of reverting to the backup. Microsoft is always there to help. If you visit their site, they will have articles that walk you through creating a backup.
So, do you want to safely fix the 403 error on a safe and automatic way? Visit: Fix Error 403

Source:-www.pcerrorsfix.com/fix-error-403

How to Fix IE Error 153

2012-01-19T10:19:00.000-08:00

They're both worrisome and inconvenient - the downside of surfing on the web is having an IE error 153; you're not only unable to work when that happens, you're at a loss to know where to turn in order to fix it. If you are interested in a quick and highly effective way to resolve these annoying errors, be sure to check out the following.
Your browser is easily one of the most highly-used applications on your computer; you check out new webpages, launch assorted online programs, and games, applications, and information are always available to you. As you probably already understand, an exchange of information routinely occurs to and from ie and your computer's operating system; the particular place in windows which has the task of 'maintaining' this activity is the registry.
When there is a rupture in this registry part of windows, this is where you start having to deal with nuisances like an IE error 153, freezes, pop up errors and many other problems. This part of your windows manages all the software and hardware you install or deinstall; the all-too-common problem of incorrect or incomplete software installations can easily damage your registry. Then you have the dilemma of detecting what the actual trouble is and then being successful at locating that corrupted part and fix it. Well, just what is a person supposed to do? We can either take the do-it-yourself route or take the expensive route and call for help.
If you come upon an IE error 153 and intend to call in a pro - not so fast! That would be a waste - save that expense for something else; this is a case of a diy fix, even if you've never tried to work on your computer before. These days, it's an easy process to download a variety of programs designed to do a scan of your computer, finding and repairing the trouble spots with no effort on your part. The majority of these programs give the opportunity for free scans and repairs - again, for free - although this can be restricted. Don't get caught off guard - start using a registry repair tool right away - you can rid your computer of these inconvenient episodes in just a few minutes from now.

Source:-http://www.articlesbase.com/data-recovery-articles/ie-error-153-try-this-errors-fix-1167104.html

how to fix error 12029 internet explorer

2012-01-18T06:49:00.000-08:00

Windows Error 12029 is a common warning message that occurs when trying to connect to a website or while using an Office application. The warning seems so urgent, yet an Internet search to repair it leads to conflicting advice, causes and remedies. Some sites blame Trojans, malware and viruses for Error 12029 while others say the problem lies in corrupt registry files. These root causes certainly are possible, however their likelihood is rather low and they should therefore be considered last. There are other more manageable solutions to try first that don't involve downloading third party software to fix a problem that may not even exist.

Connect to another website using the same browser or application that caused the Error 12029 message. Successfully accessing another website using the same software indicates that the web server being used was unavailable at the time. Web servers occasionally go down when they exceed a maximum number of simultaneous connections. All you can do is wait and try again later.

Open a command line window to verify there is no TCP/IP Address problem. On the Desktop, click "Start," then "Run." In the box type "cmd." Next, type "ipconfig /all," and a list of connections appears. Check in the IP Address, DHCP and DNS Server headings that there is an address for each one, a number in the following format: 123.456.7.8, or some similar variation. If so, the problem does not lie with the IP Address and you may proceed to step three.However, to fix a missing IP Address, DHCP or DNS Server, type in the command line, "ipconfig /release," and then type "ipconfig /renew" for new addresses. If this still fails to assign new addresses, contact your Internet service provider.

Open a command line window to verify that you are not having a DNS Server problem. Click "Start," then "Run," and type in the box "cmd." Next, type "nslookup website.com," where website.com is the site you were trying to access when the 12029 error warning popped up. Any result of a nslookup that shows addresses in the following format is okay: 123.456.7.8, or some similar variation. Move to step four.However, if there are no addresses listed, type in the command line, "ipconfig /release," and then "ipconfig /renew" to refresh the address. Try the nslookup again, and if there is still a problem, contact your Internet service provider.

Verify that your firewall is not blocking the connection to the web server that your application is trying to access. On the Desktop, click "Start," then "Control Panel," and click on "Windows Firewall." Choose the Exceptions tab and go down the list to find the name of the program you have been using that caused Error 12029. Mark the check-box to add the program. If this still fails to correct the problem, continue to step five.

Run a complete virus scan to locate malware and a registry cleaner program to fix any corrupt registry files. These solutions are the last line of defense against an Error 12029 message. As you may now realize, starting with these measures can still end in failure without having fixed the above problems first. After running a virus scan, and registry cleaner, reboot your machine.

Source:-http://www.ehow.com/how_6859984_do-fix-12029-error_.html

How to fix error 12007 internet explorer

2012-01-17T07:38:00.000-08:00

Error 12007 is usually caused by a corrupt registry entry. The best thing you can do, to prevent your PC from getting more error messages or further registry corruption, is to fix this problem immediately, by following the easy instructions below. The potential risk, resulting from not repairing this error, could include system crashes, blue screens, and hardware failure.

Most errors are caused by poor maintenance of your pc. But no-fear, repairing and getting rid of Error 12007 can be just as simple as following these 4 steps below:

Download the Error 12007 Repair Tool

"This is a free download - You'll see a new window pop-up for confirmation."

Click "Save File" and follow the simple installation instructions.
Scan your computer with the Regcure application.
Click the "Fix Errors" button to repair Error 12007.

Source:-http://errornerds.com/error/?k=Error-12007

How to Fix Certificate errors in Internet explorer help

2012-01-17T07:30:00.000-08:00

If you experience certificate errors when you visit certain websites, then perhaps it is about time that you get some certificate errors in internet explorer help. Do not worry so much though. The task is pretty simple. As a matter of fact, you can easily do it on your own. Thus, you would not need to go through the hassle of seeking the help of a professional and shelling out a couple of bucks.
Basically, you encounter certificate errors when a certificate or the use of the certificate by the server appears to be problematic. And the warning that you see is primarily a way by which the Internet Explorer helps you to maintain the security of your personal information through giving you a heads up on certificate errors. This warning usually appears in the form of a blocking page.
Another reason for errors is the poor maintenance of your personal computer. Actually, this is the most common reason.

Do not worry though because there are a lot of ways by which you can get certificate errors in internet explorer help.
For one, you can try downloading the Certificate Errors Repair Tool. This is readily available and downloadable in the internet for free. Once you have finished the download, click the Save File button. Afterwards, just follow the series of prompts for the fast and easy installation process. When the installation is complete, you should then scan your computer using the application Regcure. And finally, repair the errors by clicking the Fix Errors button.
There are a lot of types of certificate errors in internet explorer. Their causes can also be varied. Thus, in the same manner, the way by which you will have them fixed will also be different for certain cases. But the best thing about this is that there is a lot of information that are readily available in the internet about this topic to help you out. Thus, it would be best if you do some research first so you can get and do the certificate errors in internet explorer help that you need yourself.

Source:-http://techicious.com/certificate-errors-in-internet-explorer-help/

How to fix certificate error in Internet Explorer 8

2012-01-16T13:50:00.000-08:00

Hello,
I just got my laptop fixed and now many of the sites that I always go to are saying that there are certificate errors or that the security certificate is expired or not yet valid, etc... Why is this happening or is there a setting that can change this?
The main reasons for Internet Explorer certificate errors are:
• The computer's date is set to a wrong value
• The Security Certificate has really expired
• The web-site is not trustable
The most common reason could be the computer’s wrong date. Because the security certificate is valid for a certain period of time. So if the time is incorrectly set on your computer, you may receive this security certificate error message when browsing sites. So the first thing you are supposed to do is to check the date on your computer. Usually, after setting the date correctly, you can access the sites normally. If not, the security certificate of the website may really have expired or the website is not trustable. So never put your important login ID or password on such pages if you see the Security certificate error.

Set the website as trustable one?

If you are sure the website is trustable, you can manually set it as a safe website on your Internet Explorer to view it successfully.
1. Select Tools->Internet Options.
2. Select Security->Trusted sites->Sites.
3. Confirm the URL matches, and click "Add" then "Close".
4. Close the "Internet Options" dialog box with either "OK" or "Cancel".
5. Refresh the current page
Then you can access the website now. If you don’t want to set it as a safe website, you also can remove it from the list of trusted sites from your Internet Explorer.

1 click to remove IE errors

If the solution above can't help, there may be IE errors in your system files. You can't find it by simply opening and checking system files. Using a PC system maintenance tool to perform this work will be more convenient and effective. If you still haven't a choice, Wondershare 1-Click PC Care can be nice option, which can do this job within 1 click. Download and install it on your computer, then it will automatically check all errors out and you only need to give one click on the "Fix Now" button. All problems go out of your computer.

Source:-http://www.wondershare.com/disk-utility/internet-explorer-certificate-error.html

How to Fix 404 Page Not Found Error

2012-01-16T13:38:00.001-08:00

The dreaded 404 message has been around for years. It comes in many flavors and is displayed differently depending on what browser you are using such as Internet Explorer, Firefox, Chrome, etc. When you are browsing the Internet you are going to different pages in your browser. Each page you visit, like www.google.com, for example is accessing some big computer called a web server that is in some big data center on this planet. When you attempt to access a web page that does not exist on that server, the server is designed to give a standard response that lets you and your browser know that the page does not exist. That is the 404 error. It does not mean that your computer is broken by any means. It just means that you are trying to get to a page that can not be found on that server. This means carefully look at the address you typed and make sure you did not accidentally mistype something. Or if you are using an old bookmark from a page that you may have liked a long time ago, then its very possible that the owner of the website may have taken that page down because he/she has updated their content.
Nowadays many websites (especially larger websites like amazon.com or google.com) tend to customize their 404 pages by giving you something a bit more descriptive to let you know why are getting the 404 message in the first place. For example at www.boxaid.com if you accidentally go to a page that no longer exists because we have updated our content, you will get a message telling you the page is not there and you will be automatically redirected to the home page in 3 seconds. Go ahead and try it if you like. Here is a page that does not exist on our web server, www.boxaid.com/idontexist.html, go ahead and click it to see what happens. Here are some other versions of the 404 error message below:
* “404 Error”
* “Page cannot be displayed”
* “Internet Explorer cannot display the webpage”
* “404: Not Found”
* “The page cannot be found”
* “Error 404: NOT FOUND”
* “HTTP 404 – File not found”
* “Not Found”
Resolution-Here are some other things to try when you get a 404 error
1. Retry the web page by clicking the refresh/reload button or trying the URL from the address bar again. The 404 Not Found error has been known to appear on occasion even if there is no real issue so a simple refresh will often load the page you were looking for.
2. Check for errors in the URL. Often times the 404 Not Found error appears because the URL was typed wrong or the link that was clicked on points to the wrong URL.
3. Move up one directory level at a time in the URL until you find something. For example, if www.w.com/a/b/c.htm gave you the 404 Not Found error, move up to www.w.com/a/b/. If you get nothing here, move up to www.w.com/a/. This should lead you toward what you’re looking for or at least confirm that it’s no longer available.
4. If you move all the way up to the website’s main page, try to run a search for the information you’re looking for. If a search function isn’t available, try finding your information by using links from this page to dig deeper into the site.
5. Test the page at www.downforeveryoneorjustme.com. Just enter the webpage in this online tool and it will tell you just that – if the site is down for everyone, or if the problem is on your end somewhere. If the page is up for everyone except for you then the problem is at your end. Try rebooting your cable modem or router and see if you can then get to the site. If you are getting a 404 message on every website you try to visit after you have rebooted your router then it’s possible you have a virus or a trojan. Check out our article on how to confirm if you do have a virus. If you suspect you do have a virus reach out to BoxAid for virus removal help if you are unable to remove the virus yourself.
6. Finally, if all else fails, you may want to attempt to contact the webmaster for information on where you might locate the page you’re looking for. The webmaster of most Internet sites can be reached via email at webmaster@website.com, replacing website.com with the actual website name.

Internet Explorer Support

How To Modify Cache In Internet Explorer

How To Troubleshoot Runtime Error in Internet Explorer

How to setup multiple home pages in IE

How to Fix an Internet Explorer DNS Error

Instructions:-

Using IE Settings:-

Open your Internet Explorer browser. It doesn't matter what page your browser opens to as long as it is open.

How To Fix Urlmon.dll Errors

How To Modify Cache In Internet Explorer

How to Enable Cookies in Internet Explorer 8

How to Disable Flash Ads in Internet Explorer

How to Block a Website in Internet Explorer

How to Enable JavaScript in Internet Explorer

How to Fix Corrupt Internet Explorer 8

How To Fix Script Errors In Internet Explorer ?

The Best Tips to Remove Runtime Error 153 Immediately

How to Fix Internet Explorer When It Is Opening Automatically

How to Make Internet Explorer 7 the Default Browser

How To Easily Fix The Error 403 in internet explorer

How to Fix IE Error 153

how to fix error 12029 internet explorer

How to fix error 12007 internet explorer

How to Fix Certificate errors in Internet explorer help

How to fix certificate error in Internet Explorer 8

Set the website as trustable one?

1 click to remove IE errors

How to Fix 404 Page Not Found Error