lmcjipo's Blog

Blackberry Bold 9700 running BB OS 6.x

2012-01-29T00:00:00.002-05:00

When I purchased my Blackberry Bold 9700, it came with BB OS 5.x. I've been using BB OS 6.x on my Blackberry Bold 9700 for approximately 1 year after Research in Motion released it for the Blackberry Bold 9700.

My personal impressions of BB OS 6.x is that it is nice but I don't recommend it for the Bold 9700. If you have a choice between keeping your Bold 9700 running OS 5 or running it on OS 6, my personal feeling is that you should run it on OS 5.

OS 6 is a memory hog and with the limited amount of memory on the Bold 9700, after installing OS 6 on it, I can only install ~15 applications onto it whereas when my Bold 9700 was running OS 5, I had double the amount of applications without any major problems (or warning messages about running low on memory). OS 6 also seems to be optimized for a touchscreen which the Bold 9700 doesn't have. In my opinion, it is easier to navigate using a touchscreen with OS 6 (I've tested it with one of the touchscreen Blackberry devices and find OS 6 to be quite good on it).

My primary problem with OS 6 on my Bold 9700 is the amount of memory that it requires (which doesn't leave a lot of room for other applications). There is also an incompatibility between the current version of SlingPlayer for the Blackberry and OS 6 (according to Sling Media's website, it is compatible with OS 5 only). It is still possible to run SlingPlayer on my Bold 9700 running OS 6 but it is somewhat unstable. At times it will run and other times without any indications on what the problem is, it won't run. Even doing a battery pull at this point won't cause the program to run again.

It is possible to revert back to OS 5 after upgrading to OS 6. I haven't done so mainly because of the time involved in doing OS installs on the Blackberry (it can take a few hours).

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

CradlePoint MBR1000 Review

2012-01-22T00:00:00.000-05:00

After my old CradlePoint CTR-350 (reviewed in an earlier blog entry) abruptly stopped working after a few years, I started shopping for a new replacement router that would accept my USB data modem. Since I had a good experience with my CradlePoint CTR-350 (see my review of the CTR-350 *HERE*), I opted to take a look at the CradlePoint line of cellular wireless routers and came across the CradlePoint MBR-1000.

CradlePoint no longer sells the MBR1000 model so I managed to find one at an excellent price. I've been using the CradlePoint MBR-1000 for a few months now and I find that it works very well with both my USB data modems (Novatel Wireless MC950D & Nokia CS-18).

Like the CradlePoint CTR350, the MBR1000 router has the standard configurations that most wireless routers have. It also has a few configurations specific to cellphone carriers as well as some configurations that aren't part of most router configurations that I've seen. One of the features that both cellular routers have which is not cellular specific is it has the ability to scan the wifi channels in the area and use the wifi channel that will offer the least amount of interference. For example, if a nearby router is broadcasting/transmitting using channel 6, the CradlePoint MBR1000 router (as well as my old CTR350) can be configured so that it automatically won't pick the same channel of nearby routers. Using software, I've tested this and it does do this.

In addition, there are 4 ethernet ports on the router that can used by devices that only have an ethernet port and there is an additional 1 ethernet port which can be used for fail-over (internet backup) purposes. One of the features that the MBR1000 router has which the CTR350 doesn't is the ability to load balance between the "land based" internet provider and the cellular provider (or any of the other connections (USB port & Expresscard port for example). There are 2 USB ports on the MBR1000 which can be used to plug USB modems. There is also 1 Expresscard port.

In terms of the signal strength, I find it to be very good (much better than what I was getting with the CTR350). According to the specifications, the router's range is approximately 750 feet (compared with the 200 feet for the CTR350). The router has the standard security settings and supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK Encryption Protocols. Unlike the CTR350, the MBR1000 also supports the N standard.

I find the cellular router to be very good. It allows me to use my carrier's data network on my various WiFi devices. I'm also not limited to using only 1 connection with my cellular carrier's data network (which was a limitation with the USB cellular data modem). I've tested it with my WiFi Skypephone as well as my PDA and I've connected a few items to it at the same time. According to the specifications for this model, this cellular data router is capable of connecting up to 64 devices to the internet at the same time via WiFi and an "unlimited" number of devices via ethernet connection).

The company also updates their firmware on a regular basis, fixing bugs, adding features, and adding support for more cellular data devices.

Some of the things that I like about this cellular data router:

1) I find the range to be very good.

2) It is easy to configure (or as easy to configure as a regular wireless/wifi router).

3) It is able to change the wireless channel automatically when it powers on.

4) It can be configured to automatically enter your SIM or your device's security PIN.

5) Has some nice (non cellular carrier) features not available/found in regular consumer routers from D-Link, Linksys, etc.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

LG Smart TV Upgrader Box ST600 Review

2012-01-15T00:00:00.000-05:00

I've been using an LG Smart TV Upgrader ST600 box for a few months and decided to write a review on it. Since there are different programs/features accessible in different countries, my review will be based on the box being used in Canada.

This box upgrades an existing HD television to a "Smart TV" by allowing you to stream video through such services as YouTube, NetFlix, and Canadian National Film Board onto your HD television. In the US, you would be able to stream/access services such as Pandora (which isn't available in Canada). The Smart TV Upgrader box also allows for web browsing/surfing as well as streaming video, audio, and photos from your PC or associated network capable device (such as a NAS drive). There are some games available via the LG Apps Store.

In Canada, the online content includes NetFlix, YouTube, The National Film Board, Accuweather, Picasa, Ameba (Smart Kids TV), Tou.tv, Funspot, Karaoke Channel, Vtuner, NHL, MLB.tv, Viewster, I-play7u, Dailymotion, and Googlemaps.

The first thing that I did after plugging in the LG Smart TV Upgrader box and connecting it to my television is to update the firmware/software on it. As of this review, the firmware/software is ST 8.79.198.

The box connects to the network either using a standard network cable or using Wi-Fi. Setting up the box to use your home network's WiFi is very simple and I didn't have any issues connecting to two of my routers. I opted to connect to my network using a standard network cable since my television is in close proximity to one of my routers and I felt that the streaming would be better with wired over wireless. However, I did use the box over my wireless network and didn't experience any major issues.

The box uses a standard HDMI cable to connect to your HD television. If your television doesn't include an HDMI port, you are out of luck (unless you purchase or get some type of HDMI converter). The HDMI cable is not included with the unit and you will have to purchase one if you don't already have one. There is also a port for digital audio but I didn't use it.

There is also a USB port that supports external storage (playback) or a USB keyboard or USB mouse. I was able to use a USB keyboard that included a USB hub and then plugged my USB mouse into the USB port on the keyboard and didn't have any issues.

I use my LG Smart TV Upgrader box mainly for watching NetFlix, YouTube, National Film Board, and streaming online content from my PC. I will also use it quickly for Accuweather or to view some of my pictures on Picasa. The box supports almost every video file format that I tried (AVI, MP4, MKV, WMV, DivX). The only video format that I had which it didn't support was FLV. The streaming from my NAS drive and my PC was seamless. There was no buffering or stalling. I did notice that it does sometimes abruptly exits Picasa and goes back to the LG Smart TV Upgrader box's home screen. I've read reviews where some people have experienced problems streaming internal videos as well as external videos but I have not had the issues that these people have had. I'm not sure if it is because I'm using a different firmware version or whether it is because I'm using a wired network connection.

The other thing that I find that happens occasionally is that the Smart TV box will sometimes not be able to see my computer on the network using the included Nero Home software. Rebooting my computer normally will fix this or waiting/refreshing the connections list on the Smart TV box will also sometimes help fix this problem. My NAS drive is always seen by the Smart TV box without any major issues. The only issue that I have experienced with my NAS drive and the Smart TV box is viewing my JPG pictures. Occasionally some pictures for some reason are not viewable on the Smart TV box (even though they were taken from the same camera and in the same format). These same pictures are viewable on my PC without any issues.

In terms of the browsing experience, I find it to be a bit lacking. It is extremely slow and the support for more advanced websites which require either java or Flash is extremely limited. I rarely use my Smart TV box to browse the web.

Overall, I'm very satisfied with the LG Smart TV Upgrader box. It could be better but it does what I want without any major issues.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Glympse Application

2012-01-08T00:00:00.000-05:00

I've used Glympse on both my Blackberry Bold 9700, my iPhone 3GS, as well as my Samsung Nexus-S. The version that I'm currently using on my Blackberry Bold 9700 is v1.0.24. Because this program requires a data plan, I currently use it mainly on my Blackberry Bold 9700 unless I go to the US where I will use it in conjunction with my US data SIM either on my iPhone 3GS or my Samsung Nexus-S. On the Blackberry, the map that Glympse uses to show locations is Bing maps whereas on the iOS platform (since it not only works with iPhones but with iPads as well) and the AndroidOS platform, Glympse uses GoogleMaps.

Even though my review is pertaining mainly to my use of Glympse on my Blackberry Bold 9700, there are only minor differences between the different phone versions so my review/comments are pertinent to the other Glympse versions on the other phone models as well.

Glympse is a free program (at the time of this blog entry) that allows you to share with anyone (via e-mail, SMS, Facebook, or Twitter) your location for a specified time frame. What is sent is a link to Glympse's website that will show your "real-time" (within a few seconds) location. The person receiving the link or who clicks on the link will see the route and your current real-time location. If they have Glympse installed on their smartphone (Android, Blackberry, or iPhone), they can enter the Glympse location code into their Glympse program and they will be able to see your real-time location for the duration that you've specified (up to a maximum of 4 hours). If the person doesn't have Glympse installed on his/her internet enabled smartphone, he/she can still see where you are but they will have to manually update/refresh their browser/map in order to know your current location.

Provided that the person with Glympse has a data connection on his/her phone, when the e-mail option is selected, the person whom the Glympse is sent to gets an e-mail from "Glympse Invite" (invite@glympse.com) with the subject: "Here's GlympseUserID's location, courtesy of Glympse". In the body of the e-mail message is a URL similar to: http://glympse.com/ABC-DEF. The "ABC-DEF" represents the Glympse location code and the recipient of the Glympse e-mail is only required to use this code if he/she has Glympse installed on his/her smartphone (and uses the option in the Glympse menu "View a Glympse". Otherwise, if the recipient is using a computer, he/she can click on the Glympse URL location link which will bring up a map showing the starting position of when the Glympse was actually sent as well as the route taken. When the animation ends, the final location of the arrow in the animation will be the sender's current location (provided that he/she is running Glympse in the background and the duration of the Glympse did not expire).

When sending a Glympse via SMS (text messaging), Glympse will send it using the owner's SMS so depending on the owner and the receiver's respective SMS plans, charges may be incurred by either or both parties.

What I like about this program is that if I'm running late or if I want to meet someone (and they have access to an internet connected PC or internet connected smartphone), they will be able to know where I am. Before my appointment/meeting, I would send them (or upload onto Facebook/Twitter) my Glympse. Using my Glympse location code (or Glympse link), they could then figure out where I am in relation to where they are and have an idea if I am running late or not without the need to contact me to see where I am.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Happy New Year

2012-01-01T00:00:00.000-05:00

I haven't posted in my blog in a long time. As one of my New Year's resolutions, I will try to regularly post on my blog with some tech/gadget reviews, some interesting programs/applications, and my thoughts on certain products/technologies. I hope that everyone enjoys New Year's Day and I wish everyone a happy, healthy, and prosperous 2012.

Kik Messenger - Cross Platform Messaging

2010-08-07T12:28:00.002-04:00

I've used Kik Messenger - Cross Platform Messaging on both my Blackberry Bold 9700 and my iPhone 3GS. The version that I've used on my Blackberry Bold 9700 is v1.4 (according to the numbering system on Blackberry's App World) and the version that I've used on my iPhone 3GS running iOS4 is v2.0

For me, it does everything that it says that it does. I'm able to send KikSMS to my friends who don't have/use Kik. I'm also able to KikChat with friends who do have/use Kik. The company also seems very responsive to suggestions and constructive criticisms.

The first reason is there is an issue with the KikContacts vs. the regular Contacts on the phone. If you make a mistake in the Contacts before you install Kik for the first time, the KikContacts will contain the incorrect information regardless of how many times you've corrected the phone's Contact and how many times you've deleted, rebooted the phone, and reinstalled Kik. I don't know how the KikContacts work but this leads me to believe either when you delete/uninstall Kik, not everything is uninstalled/deleted from the phone or the KikContacts are stored on Kik's server. When you then reinstall Kik (even after deleting it), if it detects the old KikContacts file on your phone, it will reuse it and just input the new contacts that you've added or if when you register your phone number, it will reimport the KikContact information on your phone from the Kik's server even when one of the KikContact information was incorrect.

In my opinion, there needs to be a way of either modifying the KikContact information directly on your phone or doing a "refresh" which will wipe out the existing KikContact list and refresh the KikContact list based on whatever is now/currently in your phone's Contacts.

The second reason is that if you've KikChatted with someone in the past, you will only be able to KikChat with that person using Kik. You will not be able to KikSMS that person even if that person changes phones and is no longer able to use Kik.

There are a few issues with the KikContact Listings. Currently one of the problems that exists is that anyone whom you've sent a KikSMS to in the past will appear only as a phone number without a name. This makes sending KikSMS more difficult since you have to remember the phone number of the person whom you want to send a KikSMS to.

Don't Lock My Freedom. The campaign to ban restrictive cell phone locks.

2010-06-19T02:28:00.000-04:00

Don't Lock My Freedom. The campaign to ban restrictive cell phone locks.

Personally, I'm hoping that this private member's bill passes. I live in Canada and generally I will either purchase an unlocked phone or after buying a phone from a carrier, I will get it unlocked.

Click on the above link to get more information about Bruce Hyer's private member's bill in Canada.

Sorry in the Delay for New Posts

2010-01-29T07:36:00.000-05:00

I haven't updated my blog in awhile. I'm sorry about that but I've been very busy and unfortunately, maintaining/updating my blog is on my low list of things to do.

I still will be posting my blog regarding my iPhone 3GS 32GB as well as some additional hardware but for the time being, I'm not sure when I will have the time to do this.

Happy New Year!!!

2010-01-01T18:07:00.000-05:00

I'm still nursing my cold but I will probably start updating my blog on a regular basis (at least 1 entry per week) starting next week.

HAPPY NEW YEAR!!!

Happy Holidays

2009-12-15T19:34:00.001-05:00

Some of my friends have been asking me why I haven't updated my blog in a few weeks or written about my iPhone 3GS.

Unfortunately, I've been busy with studies, work, and my personal life as well as nursing a cold so I haven't had a chance to finish or finalize my iPhone 3GS post enough so that I can post it.

I'll be blogging again regularly in January and I will publish my post on my iPhone 3GS. I'll also post some other reviews and my thoughts on hardware/software products.

I wish everyone Happy Holidays!

Blackberry Bold 9700 Review

2009-12-02T21:59:00.000-05:00

I've had my Rogers Blackberry Bold 9700 for a little under a month and it being my first Blackberry, I'm very impressed with it. My Blackberry Bold 9700 came with 5.0.0.321 but Rogers recently released 5.0.0.351 and even though I didn't experience any issues with 5.0.0.321, I updated to the newer version and still didn't experience any issues. If it makes any difference in terms of my review, my Blackberry Bold 9700 was manufactured in Mexico. There have been some negative comments about the build construction from the earlier Bold 9700s but I haven't had any issues with the construction and build quality of my 9700.

I've only been using it for under a month but what I like about it is the almost instantaneous e-mail reception as well as the chatting capabilities of the Blackberry service.

Since the 9700 has Wi-Fi, when it is configured to connect to an access point (or router), the 9700 will automatically connect to this network whenever it is within range. This saves you from using a lot of data from the carrier. The Blackberry also compresses data from e-mail, chatting, and browsing so data usage is already efficient on Blackberries when compared with other phones. With this automatic connection of previously configured wireless networks, it makes data usage even more efficient. There is one thing to note about the connection to wireless networks over the carrier's data network and that is that I've encountered 1 program that regardless of whether you're connected to a wireless network will always access data via the carrier's data network. Yes, I did check through the options of this program and there is nothing to indicate a preference for Wi-Fi or to manually select Wi-Fi in this program. I've also encountered another program where you are required to specify the data connection to use and there is no option to automatically toggle/use the carrier's data network when you aren't connected to a wireless network. This means that if you specify that the Blackberry should use the wireless network, the moment you aren't close enough to a previously configured wireless network, the program will not update. Also, if you specify that it should use BIS (Blackberry Internet Service), regardless of whether you are within proximity of a previously configured wireless network and your Blackberry connects to the wireless network, the program will continue to use the carrier's (BIS) data.

Since I haven't received my first bill/statement yet for this account (at the time of this blog entry), I'm not sure how much data I've used. Even though I do a lot of audio/video streaming, most of the time when I'm doing this, I'm connected to a wireless access point or router. I would be very surprised if I even used more than half of the 500MB that I have with Rogers Wireless (my Blackberry carrier).

I've played YouTube videos on my Bold 9700 and the videos are quite good in terms of video quality and sound quality over the carrier's data network (Rogers) as well as over a wireless network. I've also tried a few other video/audio programs like SlingPlayer Mobile for the Blackberry and I experienced similar results. The only thing with SlingPlayer Mobile for the Blackberry is that as of today, when attempting to download the SlingPlayer Mobile software from Sling Media's website using your Blackberry, their website indicates that the device is not supported. I found a link on Sling Media's website to download the software directly to my 9700 without the "phone compatibility check" and I couldn't get it to download when I manually entered the URL into my Blackberry browser. I had to click on the link from a website.

When using SlingPlayer Mobile for Blackberry 1.0.0.11, I find that the program reacts very slowly to remote control commands regardless of whether you're using a wireless network or the carrier's data network. However, the audio/video quality is excellent on the device.

What I don't like about the Blackberry Bold 9700 is that I find the keys to be a bit cramped when I compare it with the keys on the Palm Treos that I've used (600, 650, and 680). This makes it a bit difficult more difficult to type a text with the Blackberry Bold 9700 than with the old Treo line of phones from Palm.

Another thing about the Blackberry Bold 9700 is that I like the fact that it uses a standard USB cable (unlike Apple's proprietary USB cable) to not only synchronize the device but it also charges the phone as well. However, I don't like that it is a microUSB cable instead of a miniUSB cable (because I have a lot of miniUSB cables).

I do like the trackpad on the Blackberry Bold 9700. You can control the sensitivity of the trackpad via the options so if you find it too sensitive or not sensitive enough, you can adjust the horizontal sensitivity and/or the vertical sensitivity.

On the Rogers Blackberry Bold 9700, a 2GB microSD memory card is included. I found the memory card actually inserted into my phone when I purchased it. Since it was a new activation, the store had opened up my box and inserted the SIM card into the phone in order to make sure that everything worked. The instructions for removing the memory card from the 9700 is not very detailed but in order to remove it, you must push the microSD memory card into the unit (similar to removing SD cards from some laptops/netbooks) and it will eject enough for you to be able to remove it.

I find the Wi-Fi reception strength of the Blackberry Bold 9700 to be good (better than on my iPhone 3GS). For example, while in my bedroom, my iPhone 3GS struggles to access my router's wireless signal while my 9700 accesses my router's wireless signal without any issues. The Bold 9700 handles hidden SSIDs as well as various encryption schemes. I haven't experienced any issues configuring my 9700 to connect to any wireless network where I had the necessary security credentials.

One of the first things I did after verifying for a few days that my Blackberry 9700 worked without any issues is that I unlocked it via the subsidy unlock code. After purchasing the code, it was quite easy to unlock the Rogers Blackberry Bold 9700.

In terms of the voice quality of the phone, I tested it out briefly with my Rogers prepaid SIM (since the SIM that is in my Bold 9700 is only a BIS data only account). I find the sound quality to be comparable to other cellphones that I've used. However, I would say that people have commented that the sound quality when they are speaking to me is better than when I am using my Treo 680.

I find Facebook for Blackberry (which Rogers includes as part of their default configuration) to be somewhat sluggish when I compare it to Facebook for the iPhone. This isn't really a big deal but I thought that I would mention it. The browsing experience is also better on the iPhone than it is on the Blackberry but this is not to say that the Blackberry browsing experience is bad (which I don't think it is), I just find the iPhone browsing experience to be better.

Something else that I found unusual regarding the Rogers branded Blackberry Bold 9700 is that regular MP3 files (and full length MP3 files) can be used as ringtones. With most of the other Rogers branded phones that I've used (various Nokia phones and various Sony-Ericsson phones), Rogers restricted the phone's ability to use MP3 files as ringtones.

I'm not sure what else I can write after only having used a Blackberry for slightly under 1 month (with the Blackberry Bold 9700 being my first Blackberry device) so I will end this blog entry at this point.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Rogers Wireless Pay As You Go Prepaid Review

2009-11-30T19:22:00.000-05:00

I've been using a Rogers Wireless Prepaid (Pay As You Go) phone for a little over 1 year and I thought that I would write my experience is in regards to Rogers prepaid and some things to look out for.

Rogers Wireless is a Canadian GSM carrier. They offer both postpaid plans and prepaid plans. After doing some comparison shopping for prepaid phones, I went with Rogers Wireless based on 3 things that were important to me. Since I live in a major Canadian city, all the major carriers that offered prepaid services had relatively the same reception so this wasn't a major concern of mine. The things that I was interested in was a long expiry date for a relatively low airtime purchase, a low monthly fee, and if possible various plan options (SMS, data, etc.). If possible, I was looking for a GSM company since I had already had a few GSM phones so I didn't need or want to purchase a new phone. I was also looking at a low upfront cost.

At the time of my prepaid purchase, there was only 1 main Canadian GSM company (Rogers). Fido which used to be a different company was purchased by Rogers. The other companies that I looked at were MVNOs which used the Rogers network. The MVNOs that I looked at were Petro-Canada Mobility and 7-11 Wireless.

The first MVNO that I removed from my list of consideration was 7-11 Wireless because it was somewhat difficult to purchase a phone as well as airtime in the province of Quebec. I could purchase the phone in Ontario and use it in Quebec but I thought that the hassle of doing that as well as the hassle of purchasing airtime wasn't worth it.

Petro-Canada Mobility was the next company to be removed from my list. The reason for this is that even though the expiry date policy was good (or at least it used to be good about 2 years ago), the monthly charge was higher than Rogers & Fido. Petro-Canada Mobility also charged for incoming SMS which both Rogers & Fido did not do at that time. Petro-Canada also didn't offer data or text packages.

My choice was between Rogers and Fido. Since I already had a monthly plan with Fido, I wanted to go with them because Fido offered Fido dollars. However, after looking at the options as well as the expiry date policies between Rogers and Fido, I opted to go with Rogers because even though Fido offered a lower per minute rate, for longer calls in the day, Rogers rate decreased. Something else that Rogers offered and Fido didn't offer anything comparable was that incoming Rogers prepaid calls are free. The final thing that I liked about Rogers prepaid over Fido prepaid was that Rogers prepaid had a lower yearly fee for maintaining the airtime. With Fido, it would cost a minimum of $120 for 1 year. With Rogers, it would only cost $100 for 1 year. Using a workaround, with Rogers, it was also possible to maintain a prepaid account with only $26 per year.

Since I wasn't interested in paying a daily fee for days that I wouldn't use the phone, I didn't consider any of the Rogers prepaid plans that offered this. Based on my calling patterns, I picked the "All Day Plan." The "All Day Plan" offers a rate of $0.25 per minute for the first 5 minutes in the day and then the rate drops down to $0.15 per minute for the rest of the day.

Rogers charges a $0.50 per month as a 911 fee.

Even though they include voice mail for free, when people leave messages in your voice mail box, you are charged per minute rates for this. Also, when you listen to these messages regardless of whether you use your Rogers prepaid cellphone or a landline phone, you will be charged per minute rates for doing this. One last thing is that even if someone doesn't leave you a voice mail message but they get transferred to your voice mail box, you will be charged 1 minute of airtime for this. Because I didn't like this, I opted to deactivate my voice mail box (you can do this online or by speaking with a Rogers prepaid CSR).

One other thing that Rogers prepaid does is that they display your name on the caller ID information when you call someone and if the recipient's phone (landline or cellphone) supports name display. For me, I didn't like this and I managed to get a Rogers CSR to remove my name while continuing to display my phone number when I called someone.

Rogers offers something called "Auto Saver" for their prepaid plans. "Auto Saver" is basically a pre-authorized monthly airtime purchase plan. By signing up with a credit card for pre-authorized airtime purchases of $20 or more, customers benefit from 20% off the regular airtime rates.

Rogers currently charges for incoming SMS as long as you don't have a text package. If you do have a text package, all incoming SMS is free.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Unlocking GSM cellphone and Manufacturer's Warranty

2009-11-27T20:20:00.002-05:00

I often get see questions on some of the cellphone and electronic forums that I frequent about unlocking GSM cellphones and the warranty status of doing this. Although I don't believe that this is likely, the unlocking laws in other countries might be different and what my current blog entry discusses in my experience in Canada with unlocking a phone and warranty status that I've received or didn't receive after the unlocking process.

First of all, for those people not familiar with what I mean by unlocking GSM cellphones, I have to explain that a lot of GSM carriers or carriers that use SIM cards (in the case with HSPA carriers) do with their cellphones. They apply what is called a subsidy lock onto the phone so that no SIM card other than SIM cards authorized by the carrier can be inserted and used in the phone. Placing another carrier's SIM card into a subsidy locked phone will generally cause the phone or device to display an "Invalid SIM:" or "Wrong SIM" message. On certain phones, you will be prompted for a subsidy unlock code.

Carriers lock the phone because generally they give a discount for the phone and they don't want consumers to use a competitor's SIM card in a phone that they've sold you. Another reason that carriers subsidy lock the phone is because when consumers travel internationally with their cellphones, they want consumers to pay roaming and long distance charges which are often quite high.

There are basically three ways to unlock most GSM cellphones. The first way involves entering the subsidy unlock code into the phone. The second way involves using customized/hacked firmware on the phone which tricks the phone into thinking that it is unlocked. The third way involves using a SIM insert/attachment in your phone. I've seen a fourth method illustrated on some websites for certain phones that would involve hardware modifications to the phone which would definitely void the manufacturer's warranty since it involves opening up the phone so I won't discuss this method of unlocking cellphones since it definitely voids the warranty.

The subsidy unlock code is a unique code that is specific for the phone (i.e. based on the IMEI number of the phone). This means that the subsidy unlock codes for one phone won't be the same for a different phone (since the IMEI numbers are different for the phones) even if the manufacturer, make, and model are the same. The method of going into the subsidy unlock code entry screen is different for the different manufacturers. Unlocking your cellphone via subsidy unlock code does not cause you to lose the warranty. I'll write more on this later in this blog entry. It is the preferred method for unlocking a phone since when the manufacturer/carrier releases an updated authorized firmware to correct specific problems to the phone or give the phone additional features, your phone will remain unlock if you apply their new firmware.

The customized/hacked firmware method to unlock your phone involves uploading customized firmware on the phone that was not approved/authorized by the manufacturer of the phone. This customized firmware tricks your phone into thinking that it is unlocked or it makes the phone not check the SIM to see if the SIM card matches the carrier. Because you are installing non-authorized software on the phone in order to trick your phone into thinking that it is unlocked, your phone warranty can be void. Another issue with this method of unlocking is that if the manufacturer/carrier releases an updated authorized firmware that fixes specific problems in the older firmware or gives additional features, if you decide to install this authorized firmware on your phone, your phone will re-lock to the original carrier.

The SIM insert/attachment method for unlocking the phone requires that you place your SIM card on top of a thin SIM-like device before inserting it into the phone. It tricks your phone into thinking that it is unlocked or that the SIM card matches the carrier for that phone. Some SIM insert/attachments require that you cut the SIM card and because you must place both the SIM and the SIM insert/attachment into the phone's SIM slot, it can possibly cause damage to the phone's SIM card reader which won't be covered under your phone's warranty. I don't see this happening unless you really have to force the SIM and the SIM insert/attachment into the phone's SIM slot. Using this method to unlock a phone also adds additional thickness to the "SIM" and depending on the phone can make removing the SIM difficult. These SIM insert/attachments have another limitation in that they don't work with all phones nor will they work with all SIM cards. The good thing about these inserts is that generally your phone's warranty is still valid. The negative thing about these inserts is that they may be rendered inactive when/if you update your phone's firmware or if you change your SIM card to a different revision of the carrier's SIM card.

Why does using the subsidy unlock method not void the warranty? The reason for this is that the manufacturer placed this into the phone (and not some hacker) and the phone's native/default firmware was written to accept the subsidy unlock code. Also, in lot of countries around the world, certain carriers will provide the subsidy unlock code if certain conditions are met. These conditions range from fulfilling the length of the contract, travelling abroad for a prolong period of time, purchasing a phone at the unsubsidized price, or just paying the carrier to unlock it. Unfortunately, currently in Canada, there is no condition that warrants the carrier giving or selling the subsidy unlock code to you or unlocking your phone. Certain carriers will unlock the phone for you at a cost but as of today, this is an exception and not a rule.

The subsidy unlock code can be purchased from various retailers/sellers that specialize in unlocking phones. The price of the subsidy unlock code varies between sellers and varies between phones but I've seen them being sold for as low as $1 and for as high as $100. Certain carriers will also "double-lock" their phones so that you will need 2 codes to enter in order to fully unlock the phone.

If you don't know the subsidy unlock code number for your particular SIM based phone, if you try to randomly enter numbers or enter a subsidy code for another IMEI, the only negative impact that can happen is that your phone will permanently lock to the carrier and you will not be able to use the IMEI subsidy code unlock method to unlock your phone in the future. The number of times that an incorrect code can be entered varies between manufacturers and phone models but once this limit is reached, your phone will be permanently locked to the carrier. This is the only "damage" that can occur if you unlock your phone via the subsidy code method.

Some customer service representatives or salespeople for Canadian carriers will say that unlocking a cellphone will void your warranty but because it is just entering a code into a phone without modifying the underlying manufacturer's software/firmware on the phone, it can't void the warranty. More importantly, another reason why it can't void the warranty is because certain carriers (in other parts of the world) will unlock the phone for the consumer under certain conditions. It would be similar to Microsoft saying that the Xbox warranty is void because you happened to push certain buttons on the gamepad/joystick in a certain sequence or a cordless phone manufacturer to say that the warranty was void because you happened to dial a specific number.

With the customized/hacked firmware approach to unlocking phones, the manufacturer as well as the carrier will often times consider that the warranty is void since the software is not authorized/official. If the original firmware can't be placed back onto the phone prior to the warranty request a lot of carriers will not process the warranty request to the manufacturer. The manufacturer will also consider that the warranty is void since the software/firmware on the phone is not the same firmware that they produced for the phone (or gave to the carrier).

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Netgear SPH200D Dual-mode Cordless Phone with Skype Review

2009-11-25T20:19:00.000-05:00

When I subscribed to the unlimited North American Skype Plan, I purchased this phone. At the time, I already had the Belkin Wi-Fi Skype phone but because the Belkin device relies on Wi-Fi and I wasn't overly satisfied with the sound quality with the device, I thought that a cordless phone as opposed to one using Wi-Fi would be better.

I believe that at the time that I'm writing this review, Belkin has discontinued this product but I've seen this product for sale occasionally on Ebay.

As you can see from the picture, there are essentially 3 components to this product. The first component is the transmitter unit. It is here that you would have to plug in your regular phone line as well as your RJ-45 network cable from your router. The second component is the handset which is used to make/receive calls. The third component is the handset charging cradle.

One of the things that I like about this product is that the handset is powered by two AAA NiMH batteries so they are easy to replace if necessary.

When someone calls you via Skype, the phone will automatically ring. If someone calls you on your phone number, the phone will also automatically ring. It does all of this transparently/automatically. When you want to place a call, you can have it either automatically use your phone line or Skype or you can have it ask you before each call.

With this device, you can make Skype to Skype calls (these over-the-Internet calls are free), SkypeIn/SkypeOut calls (used to make or receive regular phone calls over the internet at Skype's low per minute rates), and traditional phone calls (it functions as a regular phone through the use of a "landline".)

Now, the most important question is... how is the reception? I find that the reception to be like any other cordless phone for regular phone calls. For Skype calls, I find the call quality to be better than the Belkin Wi-Fi Skype phone but it is nowhere as good as a regular phone call and can't be mistaken as a regular phone call.

Similar to the Belkin Wi-Fi Skype phone, the Skype contact list appears on the display and you can add/delete someone from your Skype contact list directly using the handset. Once added/deleted, these changes are made to your account's contact list so when you use Skype on a PC or another Skype device, the addition/deletion will also be reflected there.

This device supports up to 4 handsets where the additional handsets are sold separately. If you ever lose/misplace one of the handsets (and the handset still has power), there is a paging function on the top of the transmitting unit that you can press. Once pressed, it will page all the handsets that are "married" to the transmitting unit and that are within range and they will all ring.

The cordless phone technology for the Netgear Dual-mode Cordless Phone uses DECT 6.0 (Digital Enhanced Cordless Telecommunications) and broadcasts in the 1.8/1.9 GHz band which according to the documentation should avoid interfering with Wi-Fi networks as well as offering long range and clear voice quality. Based on my usage, I found that cordless call quality (using the regular phone line) to be on par with other cordless phones that I've used in the past.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Palm TX (Palm T|X) Review

2009-11-23T19:07:00.000-05:00

I've had my Palm TX (or Palm T|X) for about 2 years and I thought that I would write a review on it since it can still be purchased from some retailers, some private sellers, as well as on eBay.

I've been a PalmOS user for about 8 years. As part of my job approximately 9 years ago, I was given a Palm III for my personal/work use. After having it for approximately 1 year, I was asked to return it to the department when I transferred to a different department within the same company. In the 1 year that I was using my Palm III, I was relying on it heavily for appointments, contacts, etc.. I had also purchased some 3rd party programs and found that since I relied heavily on a PalmOS device, I purchased a Handspring Visor Deluxe. After about 2 years, using the Handspring Visor Deluxe, I upgraded to the Handspring Visor Prism and later purchase a VisorPhone handspring attachment for the Prism. When my Visor Prism got somewhat physically/cosmetically damaged), I purchased a Handspring Treo 600. I later sold the Handspring Treo 600 and upgraded to a Palm Treo 650 (Palm had since purchased Handspring). After getting the Treo 650, I found that I did not have a lot of RAM on the device for 3rd party applications so when I saw the Palm TX on special, I purchased it in order to use with my Palm GPS bluetooth module and TomTom Navigator software.

The Palm TX has bluetooth, Wi-Fi, and has a 320 x 480 screen resolution screen capable of approximately 64,000 colours.. It also has approximately 128MB of non-volatile flash memory where 100 MB of actual storage capacity. It has an SD slot which supports SD cards up to 2 GB (does not support SDHC cards). It runs the PalmOS v 5.4.9. For those of you interested in whether the Palm TX supports non-SSID broadcasting Wi-Fi access points, it does. Because of the enhanced/large screen resolution for a PalmOS device, I find the PDA to be somewhat large.

I occasionally will use my Palm TX for web browsing, RSS reading, and Slingbox viewing since even though it is possible for me to do these things with my Palm Treo 650 or my Palm Treo 680, generally, the GSM SIM card that I put in these smartphones don't have access to the carrier's data network and I don't really like swapping SIM cards. I also have access to Wi-Fi access points at home and at work. I will also use my Palm TX occasionally to watch videos (using a 3rd party program called Kinoma Player) and listen to MP3 (using the included pTunes). Since I have a few dictionaries (including some translation dictionaries) installed on it, I will sometimes use my Palm TX to look up words.

In terms of the construction of the Palm TX, I find that it is constructed very well. My only complaint about it (or at least mine) is that the on/off button on the upper right corner of the device seems a bit difficult to turn on or off. The button is slightly recessed and sometimes when I press the button, my Palm TX does not turn on or turn off. Because of this, when I want to turn on my Palm TX, I will generally use one of the 4 shortcut buttons on it.

For those of you interested in my experience with using the Palm TX and SlingPlayer Mobile for the PalmOS, I find that it works quite well. The only thing is that after a few minutes of viewing, the audio and video will go out of synch. This can be temporarily fixed by disconnecting from the Slingbox, waiting a few seconds, and then reconnecting to the same Slingbox again.

If you have any questions/comments regarding my comments/review on the Palm TX (Palm T|X), please don't hesitate to leave a comment in the comments section.

A few days off from blogging...

2009-11-18T21:10:00.000-05:00

I've recently been playing around with an iPhone 3GS 32GB and a Blackberry Bold 9700 so unfortunately, I won't be making my next blog entry before Sunday November 22 when I hope to write about one of the above two items or pick another item that I've already evaluated (or I've already been using).

I'll probably be writing a few blog entries on each of the above 2 products since there is so much to write about both products.

Belkin Wi-Fi Phone for Skype Review

2009-11-16T20:54:00.000-05:00

A few years ago, when their was a sale, I purchased a Belkin Wi-Fi phone for Skype (F1PP000GN-SK) when I was subscribed to Skype's unlimited North American plan. I was looking for a way of making calls without needing my computer to be on. Even when my computer was on, I did not want to always be running Skype in the background. This phone seemed like a good idea.

In terms of the physical construction of the phone, I find that it is okay (not great... just okay). The keys don't seem to be that great and sometimes the phone will not detect that a key has been pressed.

This phone supports WPA (as well as the weaker WEP) and is also capable of connecting to wireless routers that aren't broadcasting their SSIDs. The phone supports the B & G wireless standards. Connecting to the Skype service is fairly straight forward. Once connected, the phone automatically displays the time (you have to configure the settings and manually adjust/change the time/date based on your time zone), your Skype balance, as well as your online status. Using the joystick pad on the phone, you can navigate through the menu system. Your Skype contacts' availability status will be displayed when you access the "Contacts" menu.

The phone is rechargeable and it recharges via a standard USB cable. According to the documentation, the battery is the same rechargeable lithium ion battery for digital cameras/camcorders made by Fujifilm, Pentax, and Panasonic. I haven't had to replace the battery so I'm not sure how easy it is to find the battery (NP-60).

In terms of sound quality, I find that the Belkin Wi-Fi phone for Skype does a sub par job. I find the sound to be very low when speaking to someone and my Skype contacts have informed me that there are sometimes gaps in the sound. They have also informed me that sometimes the sound level is very low.

Another negative thing about the Belkin Wi-Fi phone is that if someone decides to text chat with you because they see your status on Skype is "Available/Online", you won't get the text message. You will also not be able to reply to their text message on the phone.

I have used the Belkin Wi-Fi phone both to contact Skype users and I've also used it to make regular phone calls. The sound quality is similar in both cases. The sound quality would get better when I approached my wireless router but it would never be what I would consider great.

If you have any questions/comments regarding my review on the Belkin Wi-Fi Phone for Skype, please don't hesitate to leave a comment in the comments section.

Registering a new Red Pocket Mobile Prepaid SIM

2009-11-14T15:42:00.000-05:00

A few people asked me about my primary US SIM card so I thought that I would write another blog entry on Red Pocket Mobile but this time, I would concentrate on the purchasing & activation process.

As I mentioned in my first Red Pocket Mobile SIM blog entry, I purchased my Red Pocket Mobile SIM on Ebay. I later purchased a replacement SIM directly from the company in the US since I could no longer locate a seller on Ebay selling it. Both came from the US and both took roughly the same amount of time for it to arrive to me in Canada (~ 1 week). The one from the Ebay seller sent it via regular USPS (United States Postal Service) in a regular business sized envelope whereas the one which came directly from Red Pocket Mobile was also sent via USPS but the company used a more expensive USPS option of sending it. I don't remember what USPS option Red Pocket Mobile used to send their SIM card to me but it was in a big USPS international envelope. It took approximately 1 week for me to receive the SIM card directly from the company (shipped from California to the province of Quebec). From the private Ebay seller (located in New Jersey), it also took approximately 1 week for me to receive the Red Pocket Mobile SIM card.

You can also purchase the Red Pocket Mobile SIM card (as well as airtime) in some cities. I've seen it being sold in New York City (in Chinatown) but I don't recall the name of the business establishment.

The first thing to do before considering purchasing the Red Pocket Mobile SIM card or any carrier's phone service for that matter (either through a private seller or directly through the company) is to make sure that there is coverage in the area that you will be visiting (or in the area where you live).

As mentioned in my first blog post on Red Pocket Mobile, Red Pocket Mobile is an AT&T MVNO and they use the native AT&T GoPhone (Prepaid) network. Their coverage map is located *HERE* and you will have to make sure that you select "GoPhone" underneath the "Coverage Type" and in the "GoPhone Coverage Legend," you will have to make sure that "Pay As You Go" is selected.

As you can see, their US coverage is limited but if you will be using their SIM card within their coverage zone, Red Pocket Mobile is an option that I think deserves consideration especially for people who are from one of the places where Red Pocket Mobile only charges local rates to call (or if you plan on calling one or more of these places a lot). These places are Canada, the US, China, Hong Kong, and Singapore. Red Pocket Mobile also charges local rates to call Taiwan but this only applies to Taiwanese landlines. Calling Taiwanese cellphone numbers costs a premium. Red Pocket Mobile recently added a few other places where calling these places, local calling rates apply. These new places are 3 Mexican cities (Monterrey, Mexico City, and Guadalajara) and South Korea. Calling a South Korean phone number and paying the local rate appears to only work for landlines.

After receiving the SIM card, I activated my Red Pocket Mobile SIM card by going to their website. I filled in Red Pocket Mobile's online activation form and within an hour, I received my Red Pocket Mobile phone number as well as my PIN. The PIN is required to log onto Red Pocket Mobile's website (gives you access to the outgoing calls made to non-US phone numbers).

Since I live in Canada and I obviously didn't have a zip code, I used the hotel's zip code for the zip code field. There are only 3 mandatory fields on the form. The zip code is used to give you your Red Pocket Mobile phone number. The hotel that I was staying at was in Las Vegas so I received a phone number in the 702 area code. The only importance in the area code is how much it will cost people to reach you at the area code. With your Red Pocket Mobile phone/SIM, it costs you the same amount whether you have a Las Vegas area code and you call someone in New York City or whether you call someone in Las Vegas with your Las Vegas area code. As long as you have Red Pocket Mobile coverage, it will cost the same regardless of where you're physically located in the US when you make/receive the call to these places. The SIM ID# field is important since the company needs this in order to activate the particular SIM card. Finally, the e-mail address field is important since this is where you will receive the information (i.e. your newly created Red Pocket Mobile phone number, etc.) I didn't complete any of the other entries before submitting the form and it didn't cause any issues with my account.

When I purchase my Red Pocket Mobile SIM card, the company offered $10 initial airtime upon activation. I'm not sure if they still do this but it is my guess that it is still done.

After your Red Pocket Mobile SIM is activated, if you are in an area that Red Pocket Mobile has coverage, you should activate your voice mail. To do this, you will have to insert your Red Pocket Mobile SIM card into your unlocked GSM phone and call your Red Pocket Mobile phone number. From what I remember, the entire process takes less than 3 minutes so will cost around $0.45 in order to set it up. You cannot activate your voice mail if you do not have coverage since the system requires that you use your cellphone in order to activate it. Once your voice mail is activated, you can access it by calling your Red Pocket Mobile phone number from any phone.

After activating my Red Pocket Mobile SIM, since I thought that $10 worth of airtime wasn't sufficient for my needs, I purchased airtime via the company's website. I picked the option for them to e-mail me my ePIN refill code and I paid using PayPal. Once I received the code, because I was still in Canada, I couldn't enter this code directly into my phone because I didn't have Red Pocket Mobile coverage so I went to their website and submitted the refill ePIN code. The link to do do this is *HERE*. If I was already in the US and if I had Red Pocket Mobile coverage, the refill ePIN can also be entered directly on the handset.

If you are in an area that offers Red Pocket Mobile coverage, you can also check your airtime balance by calling *777#. If you're in an area without Red Pocket Mobile coverage, you can get your balance by calling their North American toll free number 1-888-993-3888 or by sending them an e-mail at cs@redpocketmobile.com. During regular business hours (Pacific Time), I find that e-mails are generally responded to within a few hours.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Installing Windows XP on ASUS Eee PC 701SD

2009-11-12T18:46:00.000-05:00

As mentioned in my earlier blog on the ASUS Eee PC 701SD, I would install Windows XP onto it since a few of the programs that I wanted to use (actually it was mainly 1 program) would not work under Linux. One of the functions that I wanted for this netbook was to be able to connect to my Slingbox. Installing Windows XP onto it was the easiest solution since Sling Media has SlingPlayer for Windows. During my research, I did find some instructions on how to get SlingPlayer to work under Linux but with the other Windows programs that I wanted to run, the easiest solution would be to install Windows XP onto it.

The first thing that I did even when I was running the preinstalled & customized Xandros Linux was that I upgraded the memory from 512MB to 2GB. The next thing that I did was to download all the Windows XP drivers from the ASUS support website. I also downloaded/updated the firmware on the ASUS Eee PC 701SD.

There are ways to install Windows XP using a USB memory stick but since I had my Windows XP Home DVD and I also had a portable DVD/CD drive (see my review on this *HERE*), I opted to do it the easy way and just install Windows XP from DVD. I connected my portable DVD drive to one of the available USB ports on the netbook and booted it. I then selected the option of deleting the existing partitions and used the entire 8GB SSD drive for the installation of Windows XP.

Windows XP installed without any issues. After the netbook rebooted, I ran each of the executable files from each of the driver files (since my Windows XP DVD did not have all the necessary drivers). After each driver installation, I rebooted the netbook. At the end, I had installed all the drivers and they all seemed to work.

During the installation of Windows XP because the netbook had 2GB of RAM, the virtual memory paging file was automatically set to 3GB (1.5 times the amount of RAM on the netbook). This left me with less than half of the 8GB SSD drive for my other applications. Before installing the other applications, I reduced the virtual memory paging file size to 2GB. I also went through the Windows Update process until the netbook was up to date with all the Microsoft security patches. I also downloaded Microsoft's Security Essentials (Microsoft's free antivirus/anti-spyware program) which is not part programs listed in the Windows Update screen.

After doing this, I installed the standard programs that I normally install (Adobe Acrobat Reader, Adobe Flash Player, Mozilla Firefox, TrueCrypt, OpenOffice, Axcrypt, Google Chrome, and SlingPlayer for Windows). The important thing about installing these programs is to install them one at a time since I found that with less than 8GB to "play with," I also had to compress the hard drive.

In terms of the speed of the ASUS Eee PC 701SD, I found that it was very slow. I know that because of the hard disk encryption and the compression of the hard disk as well, this slows down the netbook but the netbook is almost unusable. The netbook would pause/buffer often during YouTube video viewing and the light showing SSD activity would almost be constantly on.

Surprisingly, SlingPlayer for Windows viewing is very good (better than YouTube video viewing). It does pause occasionally but not as often as it does during YouTube video viewing even when the netbook is accessing the Slingbox via the internet as opposed to the internal network.

With Windows XP installed, I did not experience the same problem with wireless access which leads me to think that my earlier problem is not a hardware problem but a driver issue.

I find that this netbook is usable for a light user but for heavy users, I would not recommend it. It is slow enough (even with a memory upgrade from 512MB to 2GB) that most people would find it annoying.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Aluratek's eSATA USB 2.0 2.5” / 3.5” SATA Hard Drive Docking Enclosure Hub - AHDDS100F Review

2009-11-10T07:50:00.000-05:00

I purchased Aluratek's eSATA USB 2.0 2.5” / 3.5” SATA Hard Drive Docking Enclosure Hub when it went on sale since after using a similar type device but without a USB hub (from a different manufacturer) at work, I found such a device to be practical. It is plug and play as well as being hot swappable. The docking enclosure easily turns any bare standalone 2.5" or 3.5" SATA hard drive into an external hard drive.

Aluratek makes 2 models of SATA hard drive docking enclosures. They make one with a USB hub as well as one without a USB hub. The one that was on sale (and I purchased) had the USB hub (4 powered USB ports where 3 of the USB ports had connectivity to the attached computer and the remaining 1 USB port could be used only for charging a USB device). I find the added USB hub to be practical since my Acer Aspire One has 3 USB ports (where of the ports is generally being used for the cooling mat).

In order to use this device, you just push a SATA 2.5" or 3.5" hard drive into the slot on the top and turn on the device (there is an on/off switch). The hard drive docking enclosure must be connected either via USB cable to the computer or via an eSATA cable to the computer. After a few seconds, Windows will detect the hard drive and you should be able to access the data. I mention "should" because with the SATA drive that I stored some files on (using the SATA drive docking enclosure from work), the Aluratek docking enclosure was able to detect the drive but it could not mount the encrypted drive. This might of had something to do with the fact that the drive was encrypted with a different docking enclosure from a different manufacturer.

I tested a non-encrypted SATA hard drive from a different system and my netbook didn't have any issues reading it when I inserted it into the docking enclosure. I find the data transfer speed to be as fast as any other USB 2.0 hard drive enclosure. According to the company specifications, it is backward compatible with USB 1.1 specifications although I have not tried it on a USB 1.1 port.

The unit is not heavy-duty (seems to be of cheap construction) but it gets the job done. I have no problems people purchasing such a device when it is on sale.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Aluratek's USB 2.0 External Slim Multi-Format 8X DVD Reader/Writer with Software Review

2009-11-08T11:36:00.002-05:00

I purchased Aluratek's external slim multi-format DVD reader/writer a few months ago when it was on sale.

It is USB powered and requires 2 free USB ports (must be powered ports so if you plug it into a USB hub, the USB hub must be powered by something other than your computer's USB port) on your computer, netbook, or laptop in order to work. The device will not work properly/efficiently in non-powered USB hubs.

I purchased this device mainly to install some software and/or watch DVD movies on my Acer Aspire One. I have not tried this device with the ASUS Eee PC 701SD except to use it in order to install Windows XP Home on the Eee PC. My feeling about using it on the ASUS Eee PC 701 SD is that this netbook is very slow and I wouldn't trust it to burn DVDs since I expect that there will be a lot CD/DVD "coasters" as a result of using this netbook to burn CD/DVD.

According to the specifications, this external DVD reader/burner:

Supports DVD R / RW / RAM discs, and CD-R / RW discs
Fast and easy burning and copying of CDs and DVDs
Writing Speed: 8X DVD+R, 8X DVD+RW, 6X DVD+R DL (Dual Layer), 8X DVD-R, 6X DVD-RW, 6X DVD-R DL (Dual Layer), 5X DVD-RAM, 24X CD-R, and 24X CD-RW
Tray loading drive for easy access to media
USB 2.0 bus powered, No external power adapter needed
Plug-n-Play, No driver needed

I have not tried it with all the formats but for the DVD-R that I did burn, there wasn't any problems. It was also able to read the CD-R and DVD-R burnt from my home PC without any issues.

I only have 2 complaints about this drive. My first complaint about this drive is that (at least with the one that I purchased), it seems to be of cheap construction. In fact, on my unit, the screws were not securely screwed into the unit. I had to do this myself. My second complaint about this drive is that the tray will sometimes be "jammed" when you press the eject button. My feeling as to why this happens is because the tray is at a very slight angle. When the drive becomes "jammed", it requires moving the tray slightly with either a fingernail or a thin small object like a paper clip or small screwdriver. If you do this, the spring will eject the tray.

My personal feeling about this drive is that it is okay but I would only purchase it when/if it goes is on sale because of what I perceive as being "cheap" construction. Even with the "cheap" construction/workmanship, it does get the job done with the things that I used it for. I like the size of it and the fact that it is USB powered (even if it requires 2 USB POWERED ports on the computer/laptop/netbook/hub).

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

APC Back-UPS ES 750 Review

2009-11-06T17:58:00.000-05:00

I've been using the APC Back-UPS ES 750 for a few months now so I thought that I would write a review on it. UPS for those of you who are unaware is an acronym for uninterrupted power supply. It is basically a backup power supply in case there isn't any electricy.

The unit comes with 10 outlets (5 having surge protection and 5 having battery backup capabilities). The output power capability is 450 Watts / 750 VA. The company's manufacturer's code is BE750G-CN (which is the Canadian version of the Back-UPS ES 750). Included with the UPS is the user replaceable battery, a USB cable, manual, and CD software.

When I got my UPS, the battery was inside it but the battery terminals weren't connected to the cables. I didn't notice this even though the instructions mentioned this fact (I'm not the type of person who generally reads the manual before using electronic equipment). Once I attached the battery terminals to the cables, everything was working properly.

After plugging the UPS into the AC outlet and plugging my computer and its accessories to the proper outlet on the UPS depending on whether I just wanted surge protection (printer, speakers, desk lamp, etc.) or whether I wanted battery backup (computer, monitor, router, cable modem, etc.).

Three of the surge protection outlets are controlled by one of the battery backup outlets. By this, I mean that if the UPS detects that the item connected to the battery backup outlet is drawing power, these 3 surge protection outlets will have power. I decided to connect my monitor to this special "master" battery backup outlet and connect my speakers and printer to two of the surge protection outlets which were being controlled by the master. This way, when I turned off my monitor (but left my computer running), my speakers would automatically power off (likewise with my printer). When my monitor went into power save mode, these items would also power off.

I connected the USB cable from the UPS to one of the USB ports on my computer and installed the PowerChute Personal Edition software. Even though the UPS came with the software on CD, I decided to download it from the company's website since the version on company's websites are usually more recent than the version shipped with the actual product.

The main purpose of the software is that in the event of a power failure, it allows your computer to automatically shut itself down. However, this isn't really accurate. The software actually doesn't shut down but it provides unattended hibernation. The difference between hibernation and shut down is that with hibernation, the computer is suppose to return to the same state when power is restored. This means that any programs that are running or any documents which are open will remain open and you won't lose your work. With shut down, the computer exits all programs and shuts down the computer so that the next time the computer is powered on, it has to go through the entire booting sequence again. In most cases, hibernation is preferable for UPS systems but personally because hibernation doesn't seem to work properly on my PC when I have a VMware session running, I prefer that the system shut down when there is a power failure. The APC Back-UPS ES 750 only allows for hibernation.

The software has a variety of settings and self tests. It will approximate the run-time of the equipment on battery power based on the battery charge. For example, currently the software estimates that because the UPS is supplying 157 Watts of power (it gets this information via the USB cable), in the event of a power failure, the battery will last approximately 10 minutes. The UPS also has an audible alarm that sounds if the UPS is on battery power. This is user configurable so that in the event of a power failure, if you (like me), don't want the alarm to beep between 22:00 and 9:00, you can configure the UPS via the software so that it doesn't beep during those times.

Even though the battery is replaceable, because of the cost of a new battery (compared with the cost of a new UPS) as well as trying to find a reliable Canadian retailer who sells the battery, I'm not sure if many people living outside the US would replace the battery in 3-5 years when the battery probably needs replacing.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

CradlePoint CTR350 router (cellular data router) Review

2009-11-04T08:30:00.001-05:00

I was shopping for a router that would accept my USB data modem and I came across a company called CradlePoint. I found a Canadian retailer that sold a few of the CradlePoint models and I opted to get the CTR350 model based solely on the price and the size.

I've been using the CradlePoint CTR350 for a few months now and I find that it works very well with my USB data modem (Novatel Wireless MC950D).

The CradlePoint CTR350 router has the standard configurations that most wireless routers have. It also has a few configurations specific to cellphone carriers as well as some configurations that aren't part of most router configurations that I've seen. In addition, there is an ethernet port on the router that can either be used for fail-over (internet backup) purposes or it can be used as an internet connection for a device that doesn't have wifi capabilities. One of the features that it has which is not cellular specific is it has the ability to scan the wifi channels in the area and use the wifi channel that will offer the least amount of interference. For example, if a nearby router is broadcasting/transmitting using channel 6, the CradlePoint CTR350 router can be configured so that it automatically won't pick the same channel of nearby routers. Using software, I've tested this and it does do this.

In terms of the signal strength, I find it to be quite good and generally I'm within a few meters of the router when I'm accessing it. According to the specifications, the router's range is approximately 200 feet. The router has the standard security settings and supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK Encryption Protocols.

I find the cellular router to be very good. It allows me to use my carrier's data network on my various wifi devices. I'm also not limited to using only 1 connection with my cellular carrier's data network (which was a limitation with the USB cellular data modem). I've tested it with my WiFi Skypephone as well as my PDA and I've connected a few items to it at the same time. According to the specifications for this model, this cellular data router is capable of connecting up to 16 devices to the internet at the same time.

The company also updates their firmware on a regular basis, fixing bugs, adding features, and adding support for more cellular data devices.

Some of the things that I like about this cellular data router:

1) It is small.

2) It is easy to configure (or as easy to configure as a regular wireless/wifi router).

3) It is able to change the wireless channel automatically when it powers on.

4) It can be configured to automatically enter your SIM or your device's security PIN.

5) Has some nice (non cellular carrier) features not available/found in regular consumer routers from D-Link, Linksys, etc.

The only thing that I find missing/lacking from this device is it should either be USB powered (which probably isn't doable since the unit requires more than the 5V that can be supplied via USB) or be battery powered (rechargeable). It requires AC power which limits its portability since if for example, I wanted to use it, I would have to make sure that I was able to plug it into an AC outlet which depending on the location is sometimes impossible/difficult. Actually, Cradlepoint does have a portable cellular data router that is battery powered (rechargeable but unfortunately I couldn't find it at any reliable Canadian online retailers which is one of the reasons why I opted to purchase this model.

One other thing about this router is that the range is limited compared to all the home routers that I have used. This router for example would probably not work between floors unless the person accessing it was directly above/below the router's physical location (and obviously depending on the material of the ceiling/floor). The limited range is probably to be expected given the small size and the lack of external WiFi antennas. I would say that the range is better than what you can get with turning on the "personal WiFi hotspot" on some more recent cellphones but by no means does it compare to what you can get with a regular home wireless router with antenna. You can probably extend the range by connecting an external router to the available ethernet port and then configuring that external router as an access point but I did not try this.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

Novatel Wireless MC950D 7.2 USB Modem – HSDPA/HSUPA/UMTS Networks Review

2009-11-02T18:08:00.003-05:00

When I purchased my Acer 8.9" netbook, I wanted to also purchase a USB data modem that would enable my netbook to be truly portable and allow me to access the internet from almost anywhere regardless of whether there was a wifi hotspot available.

Since I had a very large data plan from my cellular service provider that with my phone was next to impossible to use over 2GB and my cellular service provider was offering a locked version of the Novatel Wireless MC950D, I opted to purchase it using my carrier's hardware upgrade system. Even though the device would be locked, I didn't have any immediate plans on using another carrier's SIM card in it.

Included in the box is an installation CD (which contains the Mac installation instructions, user guides, and quick start guide), the cellular carrier's welcome kit (which includes some information about the carrier as well as a new SIM card), a USB extension cable, and a hook holder for the device which is meant to hold the device onto a LCD monitor.

Since my netbook was running Windows XP, installation of the USB data modem was quick and easy. I slid my SIM card into the USB modem and inserted it into one of my netbook's USB ports. My netbook instantly recognized the USB data modem and the Windows installation software automatically launched from the USB stick.

After the installation finished, I rebooted the netbook. When I logged into my netbook, the Novatel Wireless connection software launched and I was prompted for the security PIN for my SIM card (since my SIM card had the security PIN enabled). After entering my SIM's security PIN, the USB data modem flashed for a few seconds before connecting to my carrier's data network. I went to speedtest.net to test the speed that I was getting with the device and I was getting more than 4 Mbits/second download and more than 750kbits/second upload. I was very satisfied with the speed that I was getting with the device (and I'm still very satisfied with the speed that I'm getting with the device).

Currently, the speed that I'm getting from this device on Rogers' wireless network according to speedtest.net is:

My current pingtest.net result is:

With the speed that I'm able to get most of the time, I don't experience any issues with watching YouTube videos or accessing my Slingbox. I've also tried to use VoIP using my carrier's data network and because of the high latency, conversations sometimes get annoying (imagine two people talking at the same time since there is a delay/pause and each person doesn't know the other person is speaking). My feeling is that this has more to do with my carrier's network and less to do with the Novatel Wireless MC950D USB modem but I thought that I would still mention it.

The only negative comment that I have about the Novatel Wireless MC950D is that it gets hot very fast. However, I've kept it plugged into my netbook's USB port for over 24 hours and never had any issues so there shouldn't be any problems. Since the device sticks out of the USB port, it can be damaged easily (or the USB port that it is connected to can get damaged). However, the device does come with a USB extension cord as well as a monitor clip holder for the device so it can easily be placed in a safer place.

One of the benefits of this device is that where-ever I go within my carrier's data coverage area, I have access to the internet on my netbook. When I was staying at a Canadian hotel and the hotel was charging me approximately $15/day for internet access, I plugged the MC950D into my netbook's USB port and I had internet access (and it didn't cost me anything extra). The internet speed in the other Canadian cities is largely dependent on the city but in the Canadian cities that I've visited, I found the internet speed to be acceptable. Often times even when the hotel is giving internet access for free, I find that I'm able to get faster speeds using Rogers' data network and this USB data modem.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.

DID (Direct Inward Dialing) Phone Number

2009-10-31T19:02:00.002-04:00

Some people asked me about my telephone service/features and one of the pay services that I use in order to get a DID (direct inward dialing) phone number is from VoIP.ms.

VoIP.ms offers a lot of features and it would be too long for me to go into all the features so you can check out their website.

I only use their service in order to get a phone number to use as a forwarding number. I find their rates very reasonable for this. When I travel to the US with one of my US prepaid cellphones, I will purchase a local Montreal phone number from them so that my friends/family does not have to pay long distance in order to reach me. I set this Montreal number to forward all calls (or only certain calls) to my prepaid US cellphone. I also use them in order to obtain a Canadian (Montreal) number to forward to my Google Voice number.

I've also done this with a toll free number (purchasing a toll free number) from this website but I found that based on the call volume that I was receiving and the extra costs of a toll free number as well as the fact that when I travel to the US over 95% of the people whom I want to be able to reach me for free at located within the Montreal local calling area, in my case, it was not practical.

In order to use the VoIP.ms services, you will obviously have to register on their website. After registering, you will see all the features and prices. Prior to registering, you are only given a brief cost structure for most of their more popular services. Once you've registered, if you want to purchase a phone number or any pay service, you will have to have a positive balance on your account. The company accepts PayPal, credit cards from certain countries, wire transfer, etc. as a means of payment. The minimum payment is $25 via PayPal.

In terms of the price plans for DID phone numbers, there is an unlimited monthly plan and a pay per use monthly plan. Initially, I opted for the unlimited monthly plan but then later opted for the pay per use monthly plan.

Using VoIP.ms, you can also set up your unlocked VoIP router and get phone service similar to what you would get with the locked Vonage router. I haven't tried this myself but it does look like something that I might eventually try in the future. If I do, I will write a blog entry for it ;-)

Something else that you can do with VoIP.ms is that you can use their service in order to install/configure your own Asterisk server. I haven't done this either but I know someone who has implemented this and it is definitely an interesting project that I might attempt as well.

If you have any questions/comments regarding this blog entry, please don't hesitate to leave a comment in the comments section.