SOA, OSB, BPM , ADF @ krishnan Blog

Oracle Fusion MiddleWare 12.2.1 Silent installation

2018-01-24T23:05:00.000-08:00

Weblogic and Fusion Middleware infrastructure Link to Download :

If you want only plain weblogic install only fmw_12.2.1.3.0_wls.jar.

or weblogic with RCU and Fusion platform install fmw_12.2.1.3.0_infrastructure.jar

BPM add on installation Jar fmw_12.2.1.3.0_soa.jar

http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html

Command to install weblogic in silent mode

create rsp (Response File) : installWeblogic.rsp

Response File Version=1.0.0.0.0
[GENERIC]
ORACLE_HOME=D:\Krishna\Oracle12cSOA
INSTALL_TYPE=WebLogic Server
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
DECLINE_SECURITY_UPDATES=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
PROXY_HOST=
PROXY_PORT=
PROXY_USER=
PROXY_PWD=<SECURE VALUE>
COLLECTOR_SUPPORTHUB_URL=

>> java -d64 -jar fmw_12.2.1.3.0_wls.jar -silent -responseFile d:\Krishna\installWeblogic.rsp

Logs Below :

D:\Krishna\fmw_12.2.1.3.0_wls_Disk1_1of1>d:\Java\jdk1.8.0_60\bin\java -d64 -jar fmw_12.2.1.3.0_wls.j
ar -silent -responseFile d:\Krishna\installWeblogic.rsp
Launcher log file is C:\Users\ipmadmin\AppData\Local\Temp\OraInstall2018-01-25_12-23-22PM\launcher20
18-01-25_12-23-22PM.log.
Extracting the installer . . . . . . . Done
Checking if CPU speed is above 300 MHz.   Actual 2264    Passed
Checking swap space: must be greater than 512 MB    Passed
Checking if this platform requires a 64-bit JVM.   Actual 64    Passed (64-bit not required)
Checking temp space: must be greater than 300 MB.   Actual 7431 MB    Passed
Preparing to launch the Oracle Universal Installer from C:\Users\ipmadmin\AppData\Local\Temp\OraInst
all2018-01-25_12-23-22PM
Log: C:\Users\ipmadmin\AppData\Local\Temp\OraInstall2018-01-25_12-23-22PM\install2018-01-25_12-23-22
PM.log
Copyright (c) 1996, 2017, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Skipping Software Updates
Starting check : CertifiedVersions
Expected result: One of Windows 7, Windows Server 2012, Windows Server 2012 R2, Windows 8.1, Windows
10, Windows Server 2016
Actual Result: Windows Server 2012 R2 Datacenter
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.

Starting check : CheckJDKVersion
Problem: This JDK version was not certified at the time it was made generally available. It may have
been certified following general availability.
Recommendation: Check the Supported System Configurations Guide (http://www.oracle.com/technetwork/m
iddleware/ias/downloads/fusion-certification-100350.html) for further details. Press "Next" if you w
ish to continue.
Expected result: 1.8.0_131
Actual result: 1.8.0_60
Warning: Check:CheckJDKVersion completed with warnings.

Validations are enabled for this session.
Verifying data
Copying Files
Percent Complete : 10
Percent Complete : 20
Percent Complete : 30
Percent Complete : 40
Percent Complete : 50
Percent Complete : 60
Percent Complete : 70
Percent Complete : 80
Percent Complete : 90
Percent Complete : 100
The installation of Oracle Fusion Middleware 12c WebLogic Server and Coherence 12.2.1.3.0 completed
successfully.
Logs successfully copied to C:\Program Files\Oracle\Inventory\logs.

Command to install Fusion Middle infrastructure in silent mode

create rsp (Response File) : installFMI.rsp

Response File Version=1.0.0.0.0
[GENERIC]
ORACLE_HOME=D:\Krishna\Oracle12cSOA
INSTALL_TYPE=Fusion Middleware Infrastructure
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
DECLINE_SECURITY_UPDATES=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
PROXY_HOST=
PROXY_PORT=
PROXY_USER=
PROXY_PWD=<SECURE VALUE>
COLLECTOR_SUPPORTHUB_URL=

>> java -d64 -jar fmw_12.2.1.3.0_infrastructure.jar -silent -responseFile d:\Krishna\installFMI.rsp

Logs Below :

D:\Krishna\fmw_12.2.1.3.0_infrastructure_Disk1_1of1>d:\Java\jdk1.8.0_60\bin\java -d64 -jar fmw_12.2.
1.3.0_infrastructure.jar -silent -responseFile d:\Krishna\installFMI.rsp
Launcher log file is C:\Users\ipmadmin\AppData\Local\Temp\OraInstall2018-01-25_12-43-17PM\launcher20
18-01-25_12-43-17PM.log.
Extracting the installer . . . . . . . . . Done
Checking if CPU speed is above 300 MHz.   Actual 2264    Passed
Checking swap space: must be greater than 512 MB    Passed
Checking if this platform requires a 64-bit JVM.   Actual 64    Passed (64-bit not required)
Checking temp space: must be greater than 300 MB.   Actual 6661 MB    Passed
Preparing to launch the Oracle Universal Installer from C:\Users\ipmadmin\AppData\Local\Temp\OraInst
all2018-01-25_12-43-17PM
Log: C:\Users\ipmadmin\AppData\Local\Temp\OraInstall2018-01-25_12-43-17PM\install2018-01-25_12-43-17
PM.log
Copyright (c) 1996, 2017, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Skipping Software Updates
Starting check : CertifiedVersions
Expected result: One of Windows 7, Windows Server 2012, Windows Server 2012 R2, Windows 8.1, Windows
10, Windows Server 2016
Actual Result: Windows Server 2012 R2 Datacenter
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.

Starting check : CheckJDKVersion
Problem: This JDK version was not certified at the time it was made generally available. It may have
been certified following general availability.
Recommendation: Check the Supported System Configurations Guide (http://www.oracle.com/technetwork/m
iddleware/ias/downloads/fusion-certification-100350.html) for further details. Press "Next" if you w
ish to continue.
Expected result: 1.8.0_131
Actual result: 1.8.0_60
Warning: Check:CheckJDKVersion completed with warnings.

Validations are enabled for this session.
Verifying data
Copying Files
Percent Complete : 10
Percent Complete : 20
Percent Complete : 30
Percent Complete : 40
Percent Complete : 50
Percent Complete : 60
Percent Complete : 70
Percent Complete : 80
Percent Complete : 90
Percent Complete : 100
The installation of Oracle Fusion Middleware 12c Infrastructure 12.2.1.3.0 completed successfully.
Logs successfully copied to C:\Program Files\Oracle\Inventory\logs.

Command to install Fusion Middle infrastructure in silent mode

create rsp (Response File) : installSOA.rsp

Response File Version=1.0.0.0.0
[GENERIC]
ORACLE_HOME=D:\Krishna\Oracle12cSOA
INSTALL_TYPE=BPM
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
DECLINE_SECURITY_UPDATES=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
PROXY_HOST=
PROXY_PORT=
PROXY_USER=
PROXY_PWD=<SECURE VALUE>
COLLECTOR_SUPPORTHUB_URL=

>> java -d64 -jar fmw_12.2.1.3.0_soa.jar -silent -responseFile d:\Krishna\installSOA.rsp

Logs Below :

D:\Krishna\V886440-01> java -d64 -jar fmw_12.2.1.3.0_soa.jar -silent -responseFile d:\Krishna\installSOA.rsp
Launcher log file is C:\Users\ipmadmin\AppData\Local\Temp\OraInstall2018-01-25_02-50-26PM\launcher20
18-01-25_02-50-26PM.log.
Extracting the installer . . . . . . . . . . . . . . . . . . . . . . Done
Checking if CPU speed is above 300 MHz.   Actual 2264    Passed
Checking swap space: must be greater than 512 MB    Passed
Checking if this platform requires a 64-bit JVM.   Actual 64    Passed (64-bit not required)
Checking temp space: must be greater than 300 MB.   Actual 6536 MB    Passed
Preparing to launch the Oracle Universal Installer from C:\Users\ipmadmin\AppData\Local\Temp\OraInst
all2018-01-25_02-50-26PM
Log: C:\Users\ipmadmin\AppData\Local\Temp\OraInstall2018-01-25_02-50-26PM\install2018-01-25_02-50-26
PM.log
Copyright (c) 1996, 2017, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Skipping Software Updates
Starting check : CertifiedVersions
Expected result: One of Windows 7, Windows Server 2012, Windows Server 2012 R2, Windows 8.1, Windows
10, Windows Server 2016
Actual Result: Windows Server 2012 R2 Datacenter
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.

Starting check : CheckJDKVersion
Problem: This JDK version was not certified at the time it was made generally available. It may have
been certified following general availability.
Recommendation: Check the Supported System Configurations Guide (http://www.oracle.com/technetwork/m
iddleware/ias/downloads/fusion-certification-100350.html) for further details. Press "Next" if you w
ish to continue.
Expected result: 1.8.0_131
Actual result: 1.8.0_60
Warning: Check:CheckJDKVersion completed with warnings.

Validations are enabled for this session.
Verifying data
Copying Files
Percent Complete : 10
Percent Complete : 20
Percent Complete : 30
Percent Complete : 40
Percent Complete : 50
Percent Complete : 60
Percent Complete : 70
Percent Complete : 80
Percent Complete : 90
Percent Complete : 100
The installation of Oracle Fusion Middleware 12c SOA Suite and Business Process Management 12.2.1.3.
0 completed successfully.
Logs successfully copied to C:\Program Files\Oracle\Inventory\logs.

RCU Installation

Path to run RCU - $ORALCE_HOME\oracle_common\bin\rcu.sh or rcu.bat

RCUresponsefile.properties

#RCU Operation - createRepository, generateScript, dataLoad, dropRepository
operation=createRepository

#Enter the database connection details in the supported format. Database Connect String. This can be specified in the following format - For Oracle Database: host:port:SID OR host:port/service , For SQLServer, IBM DB2, MySQL and JavaDB Database: Server name/host:port:databaseName. For RAC database, specify VIP name or one of the Node name as Host name.For SCAN enabled RAC database, specify SCAN host as Host name.
connectString=localhost:1522:XE

#Database Type - [ORACLE|SQLSERVER|IBMDB2|EBR|MYSQL] - default is ORACLE
databaseType=ORACLE

#Database User
dbUser=SYS

#Database Role - sysdba or Normal
dbRole=SYSDBA

#This is applicable only for database type - EBR
#edition=

#Prefix to be used for the schema. This is optional for non-prefixable components.
schemaPrefix=DEV

#List of components separated by comma. Remove the components which are not needed.
componentList=STB,ESS,OPSS,SOAINFRA,UCSUMS,IAU,IAU_APPEND,IAU_VIEWER,MDS,WLS

#Specify whether dependent components of the given componentList have to be selected. true | false - default is false
#selectDependentsForComponents=false

#If below property is set to true, then all the schemas specified will be set to the same password.
useSamePasswordForAllSchemaUsers=true

#This allows user to skip cleanup on failure. yes | no. Default is no.
skipCleanupOnFailure=yes

#This allows user to skip dropping of table spaces during cleanup on failure. yes | no. Default is no.
skipTableSpaceDropOnFailure=yes

#Yes | No - default is Yes. This is applicable only for database type - SQLSERVER.
#unicodeSupport=no

#Location of ComponentInfo xml file - optional.
#compInfoXMLLocation=

#Location of Storage xml file - optional
#storageXMLLocation=

#Absolute path of Wallet directory. If wallet is not provided, passwords will be prompted.
#walletDir=

#true | false - default is false. RCU will create encrypted tablespace if TDE is enabled in the database.
#encryptTablespace=false

#true | false - default is false. RCU will create datafiles using Oracle-Managed Files (OMF) naming format if value set to true.
#honorOMF=false

#Tablespace name for the component, STB. Enable the property only if the tablespace is existing.
#STB.tablespace=DEV_STB

#Temporary tablespace name for the component, STB. Enable the property only if the tablespace is existing.
#STB.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, ESS. Enable the property only if the tablespace is existing.
#ESS.tablespace=DEV_ESS

#Temporary tablespace name for the component, ESS. Enable the property only if the tablespace is existing.
#ESS.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, OPSS. Enable the property only if the tablespace is existing.
#OPSS.tablespace=DEV_IAS_OPSS

#Temporary tablespace name for the component, OPSS. Enable the property only if the tablespace is existing.
#OPSS.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, SOAINFRA. Enable the property only if the tablespace is existing.
#SOAINFRA.tablespace=DEV_SOAINFRA

#Temporary tablespace name for the component, SOAINFRA. Enable the property only if the tablespace is existing.
#SOAINFRA.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, UCSUMS. Enable the property only if the tablespace is existing.
#UCSUMS.tablespace=DEV_IAS_UMS

#Temporary tablespace name for the component, UCSUMS. Enable the property only if the tablespace is existing.
#UCSUMS.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, IAU. Enable the property only if the tablespace is existing.
#IAU.tablespace=DEV_IAU

#Temporary tablespace name for the component, IAU. Enable the property only if the tablespace is existing.
#IAU.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, IAU_APPEND. Enable the property only if the tablespace is existing.
#IAU_APPEND.tablespace=DEV_IAU

#Temporary tablespace name for the component, IAU_APPEND. Enable the property only if the tablespace is existing.
#IAU_APPEND.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, IAU_VIEWER. Enable the property only if the tablespace is existing.
#IAU_VIEWER.tablespace=DEV_IAU

#Temporary tablespace name for the component, IAU_VIEWER. Enable the property only if the tablespace is existing.
#IAU_VIEWER.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, MDS. Enable the property only if the tablespace is existing.
#MDS.tablespace=DEV_MDS

#Temporary tablespace name for the component, MDS. Enable the property only if the tablespace is existing.
#MDS.tempTablespace=DEV_IAS_TEMP

#Tablespace name for the component, WLS. Enable the property only if the tablespace is existing.
#WLS.tablespace=DEV_WLS

#Temporary tablespace name for the component, WLS. Enable the property only if the tablespace is existing.
#WLS.tempTablespace=DEV_IAS_TEMP

#Variable required for component SOAINFRA. Database Profile
SOA_PROFILE_TYPE=SMALL

#Variable required for component SOAINFRA. Healthcare Integration
HEALTHCARE_INTEGRATION=NO

D:\ORACLE_HOME\oracle_common\bin>rcu -silent -responseFile d:\Krishna\rcuResponseFile.properties

LOGS below:

Enter the database password(User:SYS):
Processing command line ....
Repository Creation Utility - Checking Prerequisites
Checking Global Prerequisites
The selected database is an Oracle XE Edition database, which is not certified for use in an Oracle
Fusion Middleware production environment. For a list of certified databases, refer to the Supported
System Configurations information on the Oracle Technology Network.
Enter the schema password. This password will be used for all schema users of following components:S
TB,ESS,OPSS,SOAINFRA,UCSUMS,IAU,IAU_APPEND,IAU_VIEWER,MDS,WLS.
Repository Creation Utility - Checking Prerequisites
Checking Component Prerequisites
Repository Creation Utility - Creating Tablespaces
Validating and Creating Tablespaces
Repository Creation Utility - Create
Repository Create in progress.
Percent Complete: 17
Percent Complete: 17
Percent Complete: 18
Percent Complete: 19
Percent Complete: 20
Percent Complete: 20
Percent Complete: 20
Percent Complete: 28
Percent Complete: 28
Percent Complete: 36
Percent Complete: 36
Percent Complete: 36
Percent Complete: 43
Percent Complete: 43
Percent Complete: 51
Percent Complete: 51
Percent Complete: 51
Percent Complete: 58
Percent Complete: 58
Percent Complete: 59
Percent Complete: 59
Percent Complete: 60
Percent Complete: 60
Percent Complete: 68
Percent Complete: 68
Percent Complete: 68
Percent Complete: 69
Percent Complete: 70
Percent Complete: 71
Percent Complete: 71
Percent Complete: 75
Percent Complete: 75
Percent Complete: 76
Percent Complete: 77
Percent Complete: 79
Percent Complete: 81
Percent Complete: 81
Percent Complete: 81
Percent Complete: 85
Percent Complete: 85
Percent Complete: 88
Percent Complete: 88
ORA-00439: feature not enabled: Advanced replication
File:D:\Krishna\Oracle12cSOA\oracle_common\common\sql\iau\scripts\prepareAuditView.sql
Statement:CREATE MATERIALIZED VIEW LOG ON IAU_COMMON WITH ROWID

Percent Complete: 96
Percent Complete: 100
Repository Creation Utility: Create - Completion Summary
Database details:
-----------------------------
Host Name                                    : localhost
Port                                               : 1522
Service Name                               : XE
Connected As                               : SYS
Prefix for (prefixable) Schema Owners        : DEV
RCU Logfile                                  : C:\Users\AppData\Local\Temp\RCU2018-01-30_17
-08_1331036519\logs\rcu.log
RCU Checkpoint Object                        : C:\Users\AppData\Local\Temp\\RCU2018-01-30_1
7-08_1331036519\logs\RCUCheckpointObj
Component schemas created:
-----------------------------
Component                                    Status         Logfile
Common Infrastructure Services               Success        C:\Users\ipmadmin\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\stb.log
Oracle Enterprise Scheduler                  Success        No log created
Oracle Platform Security Services            Success        No log created
SOA Infrastructure                           Success        No log created
User Messaging Service                       Success        C:\Users\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\ucsums.log
Audit Services                               Success        C:\Users\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\iau.log
Audit Services Append                        Success        C:\Users\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\iau_append.log
Audit Services Viewer                        Success        C:\Users\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\iau_viewer.log
Metadata Services                            Success        C:\Users\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\mds.log
WebLogic Services                            Success        C:\Users\AppData\Local\Temp\RCU
2018-01-30_17-08_1331036519\logs\wls.log
Repository Creation Utility - Create : Operation Completed

Maven - Oracle SOA / BPM 12c - Configuration

2018-01-04T00:23:00.003-08:00

With the 12.1.3 release of Oracle Service Bus and Oracle SOA Suite we finally can build all our soa projects with Maven. And this time we can do it natively without calling a utility like configjar or ANT from Maven

Navigate to %MW_HOME%\oracle_common\plugins\maven\com\oracle\maven\oracle-maven-sync\12.1.3



Two files available

·      oracle-maven-sync-12.1.3.jar

·      oracle-maven-sync-12.1.3.pom

and use following commands to sync your local repository:

Check if maven works

mvn -v

You can also use the maven 3.0.5 version of JDeveloper 12.1.3 located at .../oracle_common/modules/org.apache.maven_3.0.5

install the maven sync plugin to the local repository

mvn install:install-file -DpomFile=oracle-maven-sync-12.1.3.pom -Dfile=oracle-maven-sync-12.1.3.jar -DoracleHome=/Users/Krishna/Oracle/Middleware12.1.3

Deploy all the libraries to the local mvn repository

mvn -X com.oracle.maven:oracle-maven-sync:push -DoracleHome=/Users/Krishna/Oracle/Middleware/Oracle_Home/

update your local archetype catalog

mvn archetype:crawl -Dcatalog=/Users/Krishna/.m2/archetype-catalog.xml

Generate SOA Application and project as shown below. This generates SOA application HelloWorld-soa-application with project HelloWorld-soa-project.

mvn archetype:generate -DarchetypeGroupId=com.oracle.soa.archetype -DarchetypeArtifactId=oracle-soa-application -DarchetypeVersion=12.1.3-0-0 -DgroupId=org.my.helloworld -DartifactId=HelloWorld-soa-application -DprojectName=HelloWorld-soa-project -Dversion=1.0-SNAPSHOT

Adding Header in BPM and BPEL - REST Service

2017-12-27T02:26:00.001-08:00

Adding Header in BPM and BPEL - REST Service

For setting headers in REST service no need of any entry in composite.xml. Only for SOAP service we have to make entry in composite.xml

Properties : rest.binding.http.<<Custom Header Name >>

Example : rest.binding.http.username

BPM Service setting header - Service Properties

BPM Service setting header - Message Headers

BPEL Service getting header - Receive activity in .BPEL

OPENLDAP configuration in Weblogic

2017-12-26T22:34:00.000-08:00

OPENLDAP configuration in Weblogic

Step 1: OpenLDAP Installation

Refer below URL for openLDAP installation

http://www.userbooster.de/en/support/featurearticles/openldapforwindowsinstallation

.aspx

Step 2 : Create two files under

C:\OpenLDAP\ldifdata

File One Name : FileOne.ldif

## DEFINE DIT ROOT/BASE/SUFFIX ####

## uses RFC 2377 format

## replace maxcrc and com as necessary below

## or for experimentation leave as is

## dcObject is an AUXILLIARY objectclass and MUST

## have a STRUCTURAL objectclass (organization in this case)

# this is an ENTRY sequence and is preceded by a BLANK line

dn: dc=maxcrc,dc=com dc: maxcrc

description: My wonderful company as much text as you want to place objectClass: dcObject

objectClass: organization o: Maxcrc, Inc.

## FIRST Level hierarchy - people

## uses mixed upper and lower case for objectclass

# this is an ENTRY sequence and is preceded by a BLANK line

dn: ou=people, dc=maxcrc,dc=com ou: people

description: All people in organisation objectclass: organizationalunit

## SECOND Level hierarchy

## ADD a single entry under FIRST (people) level

# this is an ENTRY sequence and is preceded by a BLANK line

# the ou: Human Resources is the department name

dn: cn=Robert Smith,ou=people,dc=maxcrc,dc=com objectclass: inetOrgPerson

cn: Robert Smith cn: Robert J Smith cn: bob smith

sn: smith uid: rjsmith userpassword: rJsmitH carlicense: HISCAR 123

homephone: 555-111-2222 mail: r.smith@example.com mail: rsmith@example.com mail: bob.smith@example.com description: swell guy

ou: Human Resources

Run following commands in cmd :

>>> C:\OpenLDAP\ClientTools

ldapmodify.exe -a -x -h localhost -p 389 -D "cn=manager,dc=maxcrc,dc=com" -f

**C:\OpenLDAP\ldifdata\FileOne.ldif -w secret

File Two Name : FileTwo.ldif

## SECOND Level hierarchy

## ADD a single entry under FIRST (people) level

# this is an ENTRY sequence and is preceded by a BLANK line

# the ou: Human Resources is the department name

dn: cn=krishna moorthi,ou=people,dc=maxcrc,dc=com objectclass: inetOrgPerson

cn: krishna moorthi cn: P krishna

cn: moorthi sn: kris

uid: krishna

userpassword: SomePassword carlicense: HISCAR 123 homephone: 5551112222

mail: panji.pratomo555@gmail.com mail: panji.pratomo555@mysamz.com mail: panji_pratomo555@yahoo.com description: football maniac

ou: SOA

Run following commands in cmd :

>>> C:\OpenLDAP\ClientTools

ldapmodify.exe -a -x -h localhost -p 389 -D "cn=manager,dc=maxcrc,dc=com" -f

C:\OpenLDAP\ldifdata\FileTwo.ldif -w secret

Step 3: Open Jxplorer ( LDAP Browser )

Now you can able to see user created in OpenLDAP. Enter following details :

Host Name :   ServerName ( Ex: localhost ) Port            :   389

Base DN    :    dc=maxcrc,dc=com

Level          :    Anonymous

Step 4 : Configure OpenLDAP in weblogic console**

weblogic console → Security Relams → MyRealms → providers → Authentication

Click New → Enter LDAP Name ( Ex : KrishnaLDAP )

Click KrishnaLDAP → change control flag to → Sufficient

Host Name     : localhost

Port                : 389

User base DN : ou=people, dc=maxcrc, dc=com

Note : Restart weblogic Server

Python simple and easy to learn

2017-04-19T22:48:00.000-07:00

Python simple and easy to learn

from math import pi

check_data=True
check_value = True
check_sample =True
letters="Hello Krishna"
numbers = [6,7,8]
if check_data:
print ("Hello World" " " "Moorthi")
if check_sample:
print ("Hello Moorthi")

if check_value == False:
print ("I am in False")
elif check_value == True:
print ("I am in \n True")
else:
print ("Checking")

for char in letters:
print (char)
total=0
for num in numbers:
total = total + num

print ("Total : ",total)
for test in numbers:
pass

def krishnaMethod():
""" Documentation """
print ("I am inside method ",min(numbers))

krishnaMethod()

def greet(*names, msg = "Good morning!"):
"""
This function greets to
the person with the
provided message.

If message is not provided,
it defaults to "Good
morning!"
"""
for name in names:
print("Hello",name + ', ' + msg)

greet("Kate","krishna","Moorthi")
greet("Bruce",msg="How do you do?")
print("Pi Value : ",pi)

while True:
try:
validnumber=int(input("Please eneter number :"))
break
except:
print("Invalid data")

Output:

Hello World  Moorthi
Hello Moorthi
I am in 
 True
H
e
l
l
o
 
K
r
i
s
h
n
a
Total :  6
Total :  13
Total :  21
I am inside method  6
Hello Kate, Good morning!
Hello krishna, Good morning!
Hello Moorthi, Good morning!
Hello Bruce, How do you do?
Pi Value :  3.141592653589793
Please eneter number : 3

Simple Python Program to Write and read xml file

2017-04-19T22:45:00.000-07:00

Simple Python Program to Write and read xml file
import os
import xml.dom.minidom

dirs = os.listdir()
ListofFileNames = []
for filename in dirs:
print ("List of files : ",filename)
ListofFileNames.append(filename)

print("Files Names : ",ListofFileNames)
print("Current Dir : ",os.getcwd())

filecomposite= open("Composite.xml","w+")
filecontent ='<note><to>Tove</to><from id="12345">Jani</from><heading>Reminder</heading><body>Don forget me this weekend!</body></note>'
filecomposite.write(filecontent)
filecomposite.close()

f=open("Composite.xml", "r")
if f.mode == 'r':
contents =f.read()
print (" File contents : ",contents)

def readxmltags():
doc = xml.dom.minidom.parse("Composite.xml")
elementValues = doc.getElementsByTagName("from")

for elementvalue in elementValues:
print("I am inside method - From element value : ",elementvalue.firstChild.data)
attributeValue = elementvalue.getAttribute("id")
print("Attribute values : ",attributeValue)
readxmltags()

Output :

List of files :  Composite.xml
List of files :  .bash_logout
List of files :  .profile
List of files :  .bashrc
List of files :  .pylint.d
List of files :  _test_runner.py
Files Names :  ['Composite.xml', '.bash_logout', '.profile', '.bashrc', '.pylint.d', '_test_runner.py']
Current Dir :  /home/runner
 File contents  :   <note><to>Tove</to><from id="12345">Jani</from><heading>Reminder</heading><body>Don forget me this weekend!</body></note>
I am inside method - From element value :  Jani
Attribute values :  12345

Connecting from Weblogic server to JBoss server using Bridges - JMS Bridge Destinations

2016-11-15T05:28:00.000-08:00

Connecting from Weblogic server to JBoss server using Bridges - JMS Bridge Destinations

List of required Jar Files Please in place server lib Folder

Base_Domain/lib

Click JMS Bridge Destinations

Create New and provide below information (Target System Jboss information)

Name: ATGJbossJMSDestination

Adapter JNDI Name: eis.jms.WLSConnectionFactoryJNDIXA

Connection URL: jnp://xyz:1099

Connection Factory JNDI Name: /ConnectionFactory

Destination JNDI Name: queue/OrderCreateTest ( Only for Testing Purpose )

Initial Connection Factor: org.jnp.interfaces.NamingContextFactory (This Property is very important)

Click Ok. ATGJbossJMSDestination created.

Source JMS Bridge Creation: (Weblogic Source System)

Name: ATGInputSrc

Adapter JNDI Name: eis.jms.WLSConnectionFactoryJNDIXA

Connection URL: t3://localhost:7001

Connection Factory JNDI Name: jms.ATGInput_CF

Destination JNDI Name: jms.ATGInput_Queue

Click ok.

ATGInputSrc created as shown above.

Create a New Bridge:

Select Source Destination (Weblogic)

Select Message Provider à weblogic Server 7.0 or higher

Select Target Bridge Destination: (JBoss)

Select Message Provider à Other JMS

Select Server Name: (Please chose always SOA_Server) in this example shown AdminServer

Bridge Creation Done :

Restart weblogic Server (Note: whenever changes made in source or target Bridge. Restart Server)

If you facing State as Inactive please check Target System (Jboss)

Correct Setting TO Push Message

State: Active

Description : Forwarding Message

Enabling JMS Server logs in Weblogic Server

2016-10-21T07:32:00.000-07:00

Enabling JMS Server logs in Weblogic Server

Default the JMS Server log available in below location

Enabling log message in Topic level. If "All Body" option choose then complete message will be logged in JMS server logs.

JMS Server Log file location

Sample JMS Server logs will body content

oracle/pii_security_policy - OWSM Policy

2016-10-21T07:28:00.000-07:00

oracle/pii_security_policy - OWSM Policy

Use of this policy to encrypt user data in server log files ( Example SSN number or Credit Card Number ). So additional data level security

Project structure :

Composite Structure :

Adding Policies in proxy service - PII

Edit PII property and add Xpath expression to the filed you want to encrypt

Output message Optional

CSF Key is required to encrypt the user data. Configure in Key store ( EM Console)

Pipeline structure

Body replaced to view in console output

EM Console adding security --> Credentials

Create map as "oracle.wsm.security" and create key as "pii-csf-key"

Provide username and password

Console Input and Output data

( Input "Krishna Moorthi" and in Output encrypted as below )

oracle/log_policy - Management - OWSM policy

2016-10-21T07:26:00.000-07:00

oracle/log_policy - Management - OWSM policy

Main purpose of the policy to view Incoming and Outgoing SOAP envelope of Proxy or Business service including soap header and body

Input and Output message

log_policy available in "owsm" folder path

This log file contain only incoming and outgoing message ( No other message will be printed )

Secure JMS module with authentication ( Username and password )

2016-10-21T07:09:00.003-07:00

Secure JMS module with authentication ( Username and password )

In real world providing security is important for JMS module . So the user have permission only able to Consume or produce message to Topic/ Queue

My JMS Module Name : WVOResHubModule I want to implement security for Topic . As of now Group policy to everyone can access Topic message. In order to provide access for certain users add security shown below

JMS Module --> Security -->Policies

Click Add Conditions --> Predicate List --> User

Add usernames : I added "weblogic" as username

Click add button

Now weblogic added in JMS module level . so all the Queues and topics below to this JMS module secured with username and password auth

Now the policy used by changed from "everyone" to "weblogic". So weblogic user have only permission to read and write message to Topic/ Queue

Adding Header in Service and Reference in BPEL 2.0 and BPEL 1.1 SOA - SOAP

2016-03-10T21:52:00.004-08:00

simple test case with soapUI which adds an username and a message as HTTP header to the service invocation. In a second testcase I will mock this service in soapUI and BPEL will invoke this service and set an extra HTTP header property.

SOAP - BPEL

First step is to add a property to the binding.ws element of the service in the composite.xml. Add a property with name oracle.webservices.http.headers and as value the HTTP headers you want to use in BPEL

<property name="oracle.webservices.http.headers">username,message</property>

Next step is to define some BPEL variables for those HTTP Headers

In the receive activity of the BPEL process we can use fromProperty to copy the HTTP header property value to the BPEL variable.

Do this in the BPEL source mode.

BPEL 2.0

BPEL 1.1

<receive>

<bpelx:outputProperty name="username" variable="usernameVar"/>

<bpelx:inputProperty name="message" variable="messageVar"/>

</receive>

Now you can use these variables in BPEL, I will use these vars in the return message.

Let's invoke the service from soapUI, we need to set the HTTP header properties with their values.

When we want to invoke a reference service and we also want to set some HTTP header properties.

We need also need to set the http.headers property on the binding.ws element on the reference in the composite.xml

<property name="oracle.webservices.http.headers">username,message,message2</property>

On the invoke of the reference service we need to use the toProperty and set the BPEL vars to these HTTP header properties.

BPEL 2.0

BPEL 1.1

<invoke>

<bpelx:inputProperty name="username" variable="usernameVar"/>

<bpelx:inputProperty name="message" variable="messageVar"/>
<bpelx:inputProperty name="message2" variable="messageVar2"/>

</invoke>

When we test it again in soapUI we can see the invoke request of the soapUI mockservice,
this contains the HTTP headers which we set in the BPEL process.

ExecutorService - Java - Parallel execution

2015-12-02T23:01:00.000-08:00

ExecutorService - Java - Parallel execution

import java.util.concurrent.ExecutorService;

import java.util.concurrent.Executors;

ExecutorService executor = Executors.newFixedThreadPool(2);

Runnable worker1 = new accumulator();
executor.execute(worker1);

Runnable worker2 = new claim();
executor.execute(worker2);

executor.shutdown();

// Wait until all threads are finish
while (!executor.isTerminated()) {

}

public class accumulator implements Runnable {
@Override
public void run() {
try {

} catch(Exception e){
e.printStackTrace();
}
}
}

public class claim implements Runnable {
@Override
public void run() {
try {

} catch(Exception e){
e.printStackTrace();
}

}
}

XREF Usage in SOA ( Select - xref:lookupXRef , Add - Update - xref:populateXRefRow )

2015-12-02T22:46:00.003-08:00

XRef Usage:

( Select,Add and Update)

Xref Table Name : CLR

Name : "InterfaceName" , "LastRunDate"

Select Xref :

Syntax :

xref:lookupXRef(xrefLocation as string, xrefReferenceColumnName as string,
xrefReferenceValue as string, xrefColumnName as string, needAnException as
boolean) as string

Example :

xref:lookupXRef("CLR.xref","InterfaceName","CLR022","LastRunDate",true())

Add - xref:populateXRefRow :

xref:populateXRefRow(xrefLocation as string, xrefReferenceColumnName as string,
 xrefReferenceValue as string, xrefColumnName as string, xrefValue as string, mode
 as string) as string

Parameters

xrefLocation: The cross reference table URI.
xrefReferenceColumnName: The name of the reference column.
xrefReferenceValue: The value corresponding to the reference column name.
xrefColumnName: The name of the column to be populated.
xrefValue: The value to be populated in the column.
mode: The mode in which the xref:populateXRefRow function populates the column. You can specify any of the following values: ADD, LINK, or UPDATE.

Example :

xref:populateXRefRow("CLR.xref","InterfaceName","CLR022","LastRunDate",xp20:format-dateTime(xp20:current-dateTime(),'[Y0001]-[M01]-[D01] [H01]:[m01]:[s01].[f001]'),"ADD")

Update :

xref:populateXRefRow("CLR.xref","InterfaceName","CLR022","LastRunDate",xp20:format-dateTime(xp20:current-dateTime(),'[Y0001]-[M01]-[D01] [H01]:[m01]:[s01].[f001]'),"UPDATE")

Common Used code for Dev

2015-12-02T05:43:00.000-08:00

DVM Syntax:

dvm:lookupValue("DVM Location ","Key","ValueName","Value","")

Example :
dvm:lookupValue("oramds:/apps/Hello/dvm/wave3/xyz.dvm","Key","compName","Value","")

Count Line for large file in Java: ( Fast Execution )

/**
* @param filePath
* @return
* @throws FileNotFoundException
* @throws IOException
*/
public int countLineNumbers(String filePath) throws FileNotFoundException,
IOException {

LineNumberReader lnr =
new LineNumberReader(new FileReader(new File(filePath)));
lnr.skip(Long.MAX_VALUE);
int lineCount = lnr.getLineNumber() + 1;
lnr.close();
return lineCount;
}

Move File and Copy File logic in Java:

public void moveWorkingFile(String sourceFile, String destinationPath) {
try {
File afile = new File(sourceFile);
afile.renameTo(new File(destinationPath));
} catch (Exception e) {
   throw ex;
}
}

import oracle.j2ee.ws.common.util.FileUtils;

public void copyWorkingFile(String sourceFile,
String destinationPath) throws Exception {
try {
FileUtils.copyFile(new File(sourceFile),
new File(destinationPath));
} catch (Exception ex) {
   throw ex;
}
}

StringTokenizer :

private HashMap<String, String> propertiesMap = new HashMap<String, String>();

strProps ( userName=xyz | password = abc | url = http)

private void loadCommonProperties(String strProps) throws Exception {

String strTempProps = "";
try {
StringTokenizer tok = new StringTokenizer(strProps, "|");
while (tok.hasMoreTokens()) {
strTempProps = tok.nextToken();
if (strTempProps.contains("=")) {
String[] strKeyVal = strTempProps.split("=");
if( strKeyVal.length < 2 ){
propertiesMap.put(strKeyVal[0], " ");
}else{
propertiesMap.put(strKeyVal[0], strKeyVal[1]);
}
}
}
} catch (Exception ex) {
throw ex;
}

}

Value get from Map

propertiesMap.get("userName");

Creating Connection in Java code from Data Source JNDI Name:

private Connection getJdbcConnection(String jdbcParams) throws SQLException,
NamingException,
ClassNotFoundException {
try {
String[] strParam = jdbcParams.split(",");

String serverUrl = strParam[0];
String jndi = strParam[1];
Properties prop = new Properties();
prop.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
prop.put(Context.PROVIDER_URL, serverUrl);

InitialContext ctx = new InitialContext(prop);

DataSource dataSource = (DataSource)ctx.lookup(jndi);
Connection objConn = dataSource.getConnection();
}catch(Exception ex){
throw ex;
}
return objConn;

}

Java code to Convert Unix File format to DOS File Format

Note : Below logic only works in Unix Flavor platform.

public static String convertUnixToDosFile(String sourceFile,String targetFile) {

try {

Runtime.getRuntime().exec("unix2dos " + sourceFile + " " + targetFile);

} catch (IOException e) {

e.printStackTrace();

}
return "true";
}

SingleTon Property very important if code deployed in Cluster Env

2015-12-02T05:13:00.000-08:00

SingleTon Property very important if code deployed in Cluster Env

<reference name="CopyMoveFileOperation" ui:wsdlLocation="CopyMoveFileOperation.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/file/CopyMoveFileOperation#wsdl.interface(CopyFile_ptt)"/>
<binding.jca config="CopyMoveFileOperation_file.jca">
<property name="singleton">true</property>
</binding.jca>
</reference>

IHelperBean Class - Predefined SOA Class to set JCA properties in Spring Component

2015-12-02T05:03:00.000-08:00

IHelperBean Class - Predefined SOA Class to set JCA properties in Spring Component

Most of the Business logic are not simple to achieve in SOA ( BPEL ) or BPM, to make process more faster and simple to maintain Spring approach can be use. Calling SOA adapter in Spring also simple.

Question ???

How to set JCA properties in Run Time with out hard coding properties in .JCA and I know how to use in BPEL , But how to set in Spring ????

IHelper Bean ( Note don't change any name for IHelper Bean)

Import Statement :
import oracle.soa.platform.component.spring.beans.IHeaderHelperBean;

private IHeaderHelperBean headerHelper;

Getters and Setters

public void setHeaderHelper(IHeaderHelperBean headerHelper) {
this.headerHelper = headerHelper;
}

public IHeaderHelperBean getHeaderHelper() {
return headerHelper;

}

Code Logic :

headerHelper.setHeaderProperty("jca.file.FileName", "TmpBPCL.txt");
headerHelper.setHeaderProperty("jca.file.Directory", filePath);

Spring.xml

<beans>

<bean class="com.bcbsri.spring.mapUtil.ClaimProcessor"

id="CLM030837IpEditsFileBean">

</bean>

</beans>

How to read GB file or more than 10 MB file using File Adapter - SOA - BPEL

2015-08-29T12:01:00.000-07:00

How to read GB file or more than 10 MB file using File Adapter - SOA - BPEL

Most of the time in SOA suite have a suitation to handle more than 10 MB of data to read. But SOA file adapter limitation only 10MB beyond that adapter will fail to read input data. Solution to read GB input file also using Chunk Read logic .

Create normal file adapter using - Sync Read option and modify the .jca file completely

.JCA File :

Chunk Size I defined 100 record / chunk

<adapter-config name="ReadFileChunk" adapter="File Adapter" wsdlLocation="ReadFileChunk.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">

<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="SynchReadFile_ptt" operation="synchReadFile">
<interaction-spec className="oracle.tip.adapter.file.outbound.ChunkedInteractionSpec">
<property name="DeleteFile" value="true"/>
<property name="PhysicalDirectory" value="D:\Out"/>
<property name="FileName" value="Krishna.txt."/>
<property name="ChunkSize" value="100"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>

BPEL Implementation :

Declare default value before while loop logic

LineNumber= "1"
ColumnNumber= "1"
IsEOF = "false"

<while name="While_ChunkLoop"
condition="bpws:getVariableData('VarChunkJcaProperties','/ns7:ChunkFileAdapterProp/ns7:IsEOF') ='false'">
<sequence name="SeqChunkLogic">
<invoke name="Invoke_ReadFileFromWorkingDir"
inputVariable="ReadFile_InputVariable"
outputVariable="ReadFile_OutputVariable"
partnerLink="ReadFileChunk" portType="ns8:SynchReadFile_ptt"
operation="synchReadFile" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="jca.file.FileName"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:file"/>
<bpelx:inputProperty name="jca.file.Directory"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:dir"/>
<bpelx:inputProperty name="jca.file.LineNumber"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:LineNumber"/>
<bpelx:inputProperty name="jca.file.ColumnNumber"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:ColumnNumber"/>
<bpelx:inputProperty name="jca.file.IsEOF"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:IsEOF"/>
<bpelx:outputProperty name="jca.file.LineNumber"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:LineNumber"/>
<bpelx:outputProperty name="jca.file.ColumnNumber"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:ColumnNumber"/>
<bpelx:outputProperty name="jca.file.IsEOF"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:IsEOF"/>
<bpelx:outputProperty name="jca.file.IsMessageRejected"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:returnIsMessageRejected"/>
<bpelx:outputProperty name="jca.file.RejectionReason"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:returnRejectionReason"/>
<bpelx:outputProperty name="jca.file.NoDataFound"
variable="VarChunkJcaProperties"
query="/ns7:ChunkFileAdapterProp/ns7:returnNoDataFound"/>
</invoke>

</while>

Spring Logic IHelper Bean :

chunkSize = 1000;
lineNumber = "1";
columnNumber = "1";
currentLineCount = 1;

while (currentLineCount <= totalLineCount - 1) {
currentLineCount = currentLineCount + chunkSize;

headerHelper.setHeaderProperty("jca.file.FileName",propertiesMap.get("IN_DENT_FILENM"));
headerHelper.setHeaderProperty("jca.file.Directory", filePath);
headerHelper.setHeaderProperty("jca.file.LineNumber", lineNumber);
headerHelper.setHeaderProperty("jca.file.ColumnNumber", columnNumber);

lineNumber = Integer.toString(Integer.parseInt(lineNumber) + chunkSize);
}

normalize-space() - Be Clear where to use in SOA

2015-08-29T11:41:00.000-07:00

normalize-space() - Be Clear where to use in SOA

normalize-space() - Performs remove unwanted spaces in a string . We know that but how it works internally.

Example : " Hai User Weclome you "

Input String contains spaces in the front , last and middle also. I want to remove spaces in front,middle and last.

Note : normalize space will remove extra spaces in between words also and put only one character space.

normalize-space(" Hai User Weclome you ") ;

Ouput : "Hai User Welcome you"

If you are looking for front and last to remove spaces use

oraext:right-trim(oreaxt:left-trim(" Hai User Weclome you "));

Output : "Hai User Weclome you"

xp20:format-dateTime - SOA- Custom format Date Time

2015-08-29T11:26:00.003-07:00

xp20:format-dateTime - SOA- Custom format Date Time

Middleware intreacts with mostly external system - Each system need some custom Date and Time format structure. Most of the time developers not remember Syntax .

Y001 - year
M01 - month
D01 - date
H01 - hour
m01 - minutes
s01 - seconds
f001 - millsec

Use Ready Made functions:

xp20:format-dateTime(xp20:current-dateTime(),'[Y0001][M01][D01]_[H01][m01][s01]')

Including MillSeconds :

xp20:format-dateTime(xp20:current-dateTime(),'[M01]/[D01]/[Y0001] [H01]:[m01]:[s01].[f001]')

Universal Time format with T :

xp20:format-dateTime(xp20:current-dateTime(),"[Y0001]-[M01]-[D01]T[H01]:[m01]:[s01].[f001]")

New Line Character in BPEL - SOA

2015-08-29T10:39:00.001-07:00

New Line Character in BPEL - SOA :

My Requirement to create new line between two words.

Example :

Input : Krishna Moorthi
Output : Krishna
Moorthi

create BPEL variable varNewLine and assign Values as "
"

Now use "Krishna"+ $varNewLine + "Moorthi".

:-) :-)

File / FTP Adapter SOA - COPY / MOVE / DELETE Operation

2015-08-29T09:11:00.001-07:00

File Adapter Move / Copy Operation :

File Adapter or FTP Adapter in 11g won't direct support in GUI mode.

In Some scenarios we need to perform move or copy from one folder to another folder. Following code will support

FileMove.jca

MOVE Operation

=================================================================

<adapter-config name="FileMove" adapter="File Adapter"
                wsdlLocation="FileMovet.wsdl"
                xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/FileAdapter"/>
    <endpoint-interaction portType="FileMove_ptt" operation="FileMove">
        <interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">
   <property name="TargetPhysicalDirectory" value="D:\Moorthi"/>
            <property name="TargetFileName" value="HelloWorldNew.txt"/>
            <property name="Type" value="DELETE"/>
        </interaction-spec>
    </endpoint-interaction>
</adapter-config>
=================================================================

Invoke Change in BPEL :

<invoke name="Invoke1" inputVariable="Invoke1_FileMove_InputVariable"
                outputVariable="Invoke1_FileMove_OutputVariable"
                partnerLink="FileAdptMoveTest" portType="ns1:FileMove_ptt"
                operation="FileMove" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="jca.file.SourceDirectory" variable="sourceDirectory"/>
<bpelx:inputProperty name="jca.file.SourceFileName" variable="sourceFileName"/>
<bpelx:inputProperty name="jca.file.TargetDirectory" variable="targetDirectory"/>
<bpelx:inputProperty name="jca.file.TargetFileName" variable="targetFileName"/>
</invoke>

control the speed of JMS Consumer

2014-08-25T22:33:00.000-07:00

There is an activation agent which can be used to control the speed at which the adapter posts messages to BPEL

in 11G the setting would be configured as a binding property in the composite.xml the corresponding (inbound) <service>, e.g.

<service name="Inbound">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/demo1#wsdl.interface(SampleInbound_PortType)"/>
<binding.jca config="Dequeue_jms.jca">
<property name="minimumDelayBetweenMessages">1000</property> ------ this is the property that is being implemented.
</binding.jca>
</service>

This setting ensures that there at least will be 1000 milliseconds delay between the two consecutive messages being posted to the BPEL process.

Note: this setting pertains only to BPEL, and only to one adapter polling thread. If multiple adapter polling threads (e.g. multiple JMS dequeuer threads) have been configured, this setting will control the speed of each thread, not the combined speed.

By implementing the above mentioned solution, I would like to highlight one point though, you need to keep in mind that the delay will happen all the time regardless of heavy or light load.

SOA 11g- Set Custom JMS Header properties In Mediator & BPEL

2014-08-25T22:30:00.001-07:00

In this post, I will show you how you can set custom JMS header properties in Mediator and BPEL components.

By Default a JMS message includes a number of header fields that contain information used to identify and route messages. The supported headers for an incoming message are:

Ø JMSCorrelationID
Ø   JMSDeliveryMode
Ø   JMSExpiration
Ø   JMSMessageID
Ø   JMSPriority
Ø   JMSRedelivered
Ø   JMSTimestamp
Ø   JMSType

But we can also set Custom properties.

Mediator: To set custom JMS header property in Mediator follows below steps.

Ø Open .mplan file and click on assign activity. Here we are defining new custom header property (city).
Ø To set city custom header property choose “jca.jms.JMSProperty” and append “.city” to it. You can assign any expression or hard-code this property value.

BPEL: To set custom JMS header property in BPEL follows below steps.
·         Go to *.bpel file, check the invoke code and add a new property called jca.jms.JMSProperty.city, for instance:

<invoke name="Invoke1" inputVariable="Invoke1_Produce_Message_InputVariable"
            partnerLink="Produce_Message" portType="ns1:Produce_Message_ptt"
            operation="Produce_Message" bpelx:invokeAsDetail="no">
              <bpelx:inputProperty name="jca.jms.JMSProperty.city" variable="cityVar"/>
</invoke>

Currently this property is equal to cityVar but you can also use expression to assign value to city property.

              <bpelx:inputProperty name="jca.jms.JMSProperty.city" expression="2"/>

Remember you will not find this property in header tab, you need to manually set this property in *.bpel file for specific invoke.

When you will run the composite, you will see custom JMS header property at admin console for that queue.

Message Selector Proprty in JMS :

I will show you how to set Message Selector property in JMS adapter to filter the incoming message based on custom JMS header property.We use Message Selector property when your messaging application needs to filter the messages it receives.

This field is also optional. It filters messages based on header and property information. The message selector rule is a Boolean expression. If the expression is true, then the message is consumed. If the expression is false, then the message is rejected.

For example, you can enter logic, such as: city in ( 'Mohali', 'Mumbai', 'Delhi')

I explained how to set custom JMS header property. In this post I will show you how to set Message Selector property in JMS adapter to filter the incoming message based on custom JMS header property.

We use Message Selector property when your messaging application needs to filter the messages it receives.

This field is also optional. It filters messages based on header and property information. The message selector rule is a Boolean expression. If the expression is true, then the message is consumed. If the expression is false, then the message is rejected.

For example, you can enter logic, such as:

· city in (‘Mohali’, 'Mumbai', 'Delhi')

· city=’Mohali’

To set the Message selector property, open JMS adapter configuration Wizard. Here you can set Message selector property as shown in below diagram.

- See more at: http://soawork.blogspot.de/2013/10/message-selector-property-jms-adapter.html#sthash.eBG71n2u.dpuf

Dynamically enable or disable items of ADF bound List (af:selectOneChoice) -Oracle ADF

2014-08-20T23:12:00.000-07:00

This tutorial is about a requirement of conditionally enabling/disabling items (values) of adf bound List (af:selectOneChoice) component
here i am taking reference of default HR Schema (Departments and Location table )

See the steps-

Create a Fusion Web Application and business components using both tables

Now create List of Values (Lov) on locationId of departments VO from Location VO

Set List Attribute to LocationId and for UI city will be shown

Now Drag Departments VO from Data Control on page as a form

Select LocationId list field and delete f:selectItems from it, now drag af:selectItem as child of af:selectOneChoice and surround it with af:forEach

Add tree binding of Location ViewObject to page bindings in order to populate list items using forEach

Now select af:forEach and set its property and variable name, as we have to iterate through Location VO for list items

Again select af:selectItem and set its value and label property using forEach variable's

Now run your application, and see that list box is ready with values

Now we have to disable its values as a condition basis, i have written an Expression on af:selectItem's disabled property

I have written condition for DepartmentId 100 and 110, see in source of page

<af:selectOneChoice value="#{bindings.LocationId.inputValue}" label="#{bindings.LocationId.label}"
                                        required="#{bindings.LocationId.hints.mandatory}"
                                        shortDesc="#{bindings.LocationId.hints.tooltip}" id="soc1"
                                        contentStyle="width:150px;color:red;">
                        <af:forEach items="#{bindings.Locations1.rangeSet}" var="list">
                            <af:selectItem label="#{list.City}" id="si1" value="#{list.LocationId}"
                                           disabled="#{ (bindings.DepartmentId.inputValue==100 and (list.LocationId==1000 || list.LocationId==1300)) || (bindings.DepartmentId.inputValue==110 and (list.LocationId==1500 || list.LocationId==1600 || list.LocationId==1700 || list.LocationId==1800 || list.LocationId==1900))}"/>
                        </af:forEach>
                    </af:selectOneChoice>

Now value given in Expression for Location Id will be disabled for given Department
Run your page and select DepartmentId 100 and 110 to see disabled list items