SubTechSupport

Increase Broad Band Speed

2010-09-16T18:03:00.002+05:00

This is for broad band connections, though it might work for dial up.

• Make sure your logged on as actually "Administrator".
• Start->Run->type gpedit.msc
• Expand the "Local Computer Policy" branch.
• Expand the "Administrative Templates" branch.
• Expand the "Network Branch".
• Highlight the "QoS Packet Scheduler" in left window.
• In right window double-click the "Limit Reserve able Bandwidth" setting.
• On setting tab check the "Enabled" item.
• Where it says "Bandwidth limit %" change it to read 0.

Effect is immediate on some systems, some need to re-boot. This is more of a "counter what XP does" thing. In other words, programs can request up to 20% of the bandwidth be reserved for them, even with QoS disabled.

Create a Hidden User Account

2010-09-09T04:07:00.002+05:00

This trick allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.

[Start] [Run] [Regedit]
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Type Name of Account to be Hidden]
Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
Exit Registry / Reboot

Increase Menu Display Speed

2010-09-09T04:05:00.003+05:00

When you click on the Start Menu there is some delay to display the contents , just for no reason. Effects are pretty though. The default speed can be adjusted with a quick registry entry.

The default value is 400. Set it to 0 and the delay is gone. If you are not able to adjust pick a number that suits your style and make the change.

[Start]>[Run]>[Regedit]
Go to HKEY_CURRENT_USER\Control Panel\Desktop
Modify/Create String value of Data type REG_SZ Named [MenuShowDelay]
Value Data: [Default = 400 / Adjust to Preference]
Exit Registry / Reboot

How to Remove RVHOST.EXE malware?

2010-09-01T04:15:00.002+05:00

Follow these steps to completely remove this worm:

1-Start>RUN

2-Write CMD

3-In CMD,write "Taskkill /T /IM "RVHOST.EXE"

Open a Notepad Start & go to;RUn

4-Write "NOtepad"

5-in notepad paste these lines below

On Error Resume Next

Set shl = CreateObject("WScript.Shell")

Set fso = CreateObject("scripting.FileSystemObject")

shl.RegDelete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"

shl.RegDelete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableTaskMgr"shl.RegDelete

6- Save the notepad as "Enable.VBS" and the change the file type to "All"

7-Double click "Enable.VBS"

8-Now Start>Run. Write "Regedit" in it and press enter

9- Do the following changes in Registy

In the left panel, double-click the following:

HKEY_CURRENT_USER>Software>Microsoft>

Windows>CurrentVersion>Run

In the right panel, locate and delete the entry:

Yahoo Messengger = "%System%\RVHOST.exe"

(Note: %System% is the Windows system folder, which is usually C:\Windows\System on Windows 98 and ME, C:\WINNT\System32 on Windows NT and 2000, and C:\Windows\System32 on Windows XP and Server 2003.)-->

Removing Other Entry from the Registry

Still in Registry Editor, in the left panel, double-click the following:

HKEY_CURRENT_USER>Software>Microsoft>Windows>CurrentVersion>Policies>Explorer

In the right panel, locate and delete the entry:

NofolderOptions = "1"

Restoring Modified Entries from the Registry

Still in Registry Editor, in the left panel, double-click the following:

HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows NT>CurrentVersion>Winlogon

In the right panel, locate the entry:

Shell = "Explorer.exe RVHOST.exe"

Right-click on the value name and choose Modify. Change the value data of this entry to: "Explorer.exe"

In the right panel, double-click the following:

HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>Schedule

In the right panel, locate the entry:

NextAtJobId = "2"

Right-click on the value name and choose Modify. Change the value data of this entry to: "1"

Close Registry Editor.

Deleting the Malware File(s)

Right-click Start then click Search... or Find..., depending on the version of

Windows you are running.

In the Named input box, type:

AT1.JOB

In the Look In drop-down list, select My Computer, and then press Enter.

Once located, select the file then press SHIFT+DELETE.

Note: AT1.JOB is a Scheduled Task so you can find this in C:\WINDOWS

HTC Spark Win Phone 7 Handset Has Sliding Speaker

2010-08-27T22:35:00.004+05:00

The device is apparently going to run Windows Phone 7 and we have a short list of specs and features for you:

• 1GHz Qualcomm 8250 processor
• 512MB of ROM
• 512MB of RAM
• 3.7-inch touch screen display
• WVGA 480 x 800 resolution
• 1350mAh battery
• 5-megapixel camera with auto-focus (and probably video recording)
• EDGE / GPRS / GSM support
• UMTS HSUPA/HSDPA support
• 7 hardware buttons (Back Key, Start Key, Volume Up/Down, Reset Button, Send Key, End/Power Button)
• Proximity Sensor, G-Sensor, Light Sensor

TO HIDE HARD DISKS

2010-08-26T22:36:00.005+05:00

To START

Go to start menu
Click on run
Write "regedit"

ON LEFT PAN

Open HKEY_CURRENT_USER
Open software
Open Microsoft
Open windows
Open current version
Open policies
Open Explorer

ON RIGHT PAN

Right click
New
Dword value
Name the value as {"NoDrives"}
Then right click on the value
Click on modify

FOR HIDING ALL PARTITIONS

Check hexadecimal base
Enter value data {"3fffff"}

FOR HIDING SINGLE PARTITION

Check hexadecimal base
Enter value data for

For Drive Latter	Value Data {Hexadecimal Base}
A	1
B	2
C	4
D	8
E	12
F	16
G	20
H	24
For next drive latter	Add 4 in 24 or so on

HIDE FOLDERS USING DOS

2010-08-26T22:30:00.004+05:00

You Can Hide Your Folder through Dos

To Hide Folder:

Open DOS and type

"attrib +h +s +r <file name/ folder name >"

To Unhide Folder:

Open DOS and type

"attrib -h +s +r <file name/ folder name >"
or
"attrib -h -s -r <file name/ folder name >"

But you had to remember file/folder name otherwise it may be a problem to see such folder without dos.

To locate such folders go to tools then folders option and then view unmarked hidden protected operating system files and show the hidden files

Print Spooler Service

2010-08-26T00:32:00.004+05:00

You get the following error when you try to install a Printer in Windows.

"Operation could not be completed. The print spooler service is not running."

Press Window key + R to open the Run dialog Start and type services.msc and click OK.
Double-click the Printer Spooler service, and then change the start up type to Automatic. This sets the Spooler service to start automatically when you restart the computer. Click OK.
Restart the computer and try to install the printer again.

If that doesn't work, the problem could be related to corrupted printer drivers that are installed on the computer. Try uninstalling all printer software from the computer and start from scratch. This may include PDF writer or faxing software as well. Anything listed in the Control Panel under Printers & Faxes I would do away with. If there is any software installed for other printers in Add/Remove Programs I would uninstall it all. Clean out everything possible that might be hanging the Printer Spooler service. Obtain updated software from your printer manufacturers and reinstall only the items you need.