Knowledge Sharing

Jammu and Kashmir Pollution Control Board NOC

2022-07-19T22:14:00.000-07:00

Jammu and Kashmir Pollution Control Board is a statutory body established under the Jammu and Kashmir Municipal Areas (Protection of Environment) Act, 1992.

The main functions of the Board are to regulate pollution caused by industrial activities, construction, mining, domestic wastes etc., in all the municipal areas of Jammu & Kashmir State.

Jammu and Kashmir Pollution Control Board (JKPCB)

The Jammu and Kashmir Pollution Control Board (JKPCB) has issued a NOC for setting up a small unit for manufacturing of solid waste management and treatment plants.

The JKPCB has been entrusted with the task of ‘development and implementation of Solid Waste Management (SWM) in the state, according to the order. SWM is one of the key components of integrated solid waste management (ISWM). The order said that “the proposal has been approved by all concerned departments and empowered officers have been designated as per their respective posts”.

Objectives of J&K Pollution Control Board

To prevent pollution of air, water, land and another environment
To control pollution by wastewater and solid waste
To control discharge of sewage into rivers, lakes, canals etc
To control discharge of industrial effluents into rivers, lakes etc
To provide proper treatment to garbage before disposing it in a safe way
To provide proper treatment to industrial effluents before discharging them into rivers, lakes etc.

How to Obtain Jammu Kashmir Pollution Control Board NOC

If you are planning to travel from jammu kashmir to any other state of india or outside, then it is mandatory that you obtain a no-objection certificate noc from the pollution control board. This noc will allow you to enter into the state of Jammu and Kashmir.

The process of obtaining a noc is quite simple, but there are some points that one should keep in mind while applying for this.

One can apply for a no objection certificate on their own or through an agent. In case, one wants to apply for a no objection certificate on their own, they have to submit their application form along with all required documents and documents related with their trip.

If one wants to apply through an agent, then they have to pay the required fee before sending their application form. After paying the fee one has to send all required documents along with application form along with all required documents related with their trip along with passport size photographs. The agent will then send back your application form along with all required documents along with passport size photographs after which you will receive your NOC.

Document required for jammu Kashmir Pollution Control Board NOC

Annexure to NOC application
Site plan and the details of forest, human settlement, road, railway etc. within the radius of 2.0 Km.
Plant layout plan, showing stack, drains, green-belts, solid waste-disposal space and details of pollution control space etc.
Registration of Industries department/J&K Govt./Govt. of India
Details of manufacturing process and flow sheet.
Industrial Project Report.

Sebi Alternative Investment Fund : Categories and Documents

2022-05-09T02:53:00.004-07:00

Alternative Investment Funds (AIFs) In India

The Sebi Alternative Investment Fund (AIF) is a fund that can be launched by an Alternative Investment Fund Manager (AIFM) to raise capital from investors. The fund will invest in other funds, which are registered with SEBI. These include hedge funds, private equity, and venture capital funds.

The AIF can be set up by any person who has been granted registration by SEBI as an AIFM. SEBI has issued a notification on the guidelines for setting up an AIF and norms for investing in it. An AIFM is required to obtain prior approval from SEBI before launching an AIF.

Categories Of Alternate Investment Fund

The investment objective of an AIF is to generate returns primarily through investments in other alternative investment funds that invest in emerging markets such as private equity, hedge funds, and venture capital funds.

Category I AIF: The Category I AIF is a Collective Investment Scheme (CIS) that is registered with SEBI and can be marketed in India. It is subject to the provisions of the Securities and Exchange Board of India Act, 1992, as amended from time to time (SEBI Act), and other relevant laws. The Category I AIFs are similar to mutual funds in the sense that they offer investors an opportunity to pool money together into a fund that invests in securities. However, unlike mutual funds, they are not listed on any stock exchange. They are generally structured as closed-ended schemes where subscriptions are made at fixed intervals and redemptions are also done at pre-determined intervals.

Category II AIF: The Category II AIF is registered with SEBI but its units cannot be marketed in India. This category of investment funds is usually set up for foreign investors who look at India as an emerging market for investment purposes. The Category II AIFs are usually structured as open-ended schemes where subscriptions and redemptions may be made at any time during their tenure.

Category III AIF: The Category III AIF is a CIS that has been registered with SEBI but no units can be marketed in India. Category III AIFs are not permitted to market their products directly to retail investors. However, they may be marketed indirectly through distributors or advisers registered with SEBI (Securities & Exchange Board of India).

Documents Required For Alternate Investment Fund Registration:

Application Form: The application form for registration of an AIF has to be submitted online through SEBI's website www.sebi.gov.in. The applicant must complete all columns of the Application Form and upload the required documents (listed below).
A copy of Memorandum & Articles of Association of the company or LLP/LLP, where AIF is proposed to be incorporated
A copy of Certificate of Incorporation or Registration of Company/LLP duly certified by Registrar of Companies/Partnership State/Chambers of Commerce & Industry/Federation or similar authorities in case no such certificate is available with the applicant
A copy of the resolution passed by the Board approving registration of AIF, certified by Secretary and Managing Director or Founder Member(s)/Partner(s) along with their signatures duly attested by Commissioner for Oaths

Follow on

Alternative Investment Funds Registration

2021-12-24T02:49:00.003-08:00

Alternative investment funds are managed by professional investors, and there may be a commission charged on the sale of units, which will vary from fund to fund. Alternative investment funds can invest in any type of asset class, such as shares, bonds, money market instruments, and property.

What are the types of Alternative Investment Funds in India?

Category I AIF:

SME Funds
Social Venture Capital Funds
Infrastructure funds
Venture Capital Funds
Angel Funds

Category II AIF

Private Equity (PE) Funds
Real estate Funds
Funds for distressed assets
Debt Funds
Funds of Funds

Category III AIF

Hedge Funds
Private Investment in Public Equity Funds (PIPE)

How to become An Alternative Investment Fund (AIF)

The applicant for registration as an Alternative Investment Fund under the SEBI (Alternative Investment Funds) Regulations, 2012 should submit an application to SEBI in Form A, along with other essential documents.
Within 21 working days of receiving the application, the applicant will receive a response from SEBI. The length of time it takes to register, on the other hand, is determined by how quickly the applicant meets the requirements.
The applicant is advised to review the SEBI (Alternative Investment Funds) Regulations, 2012 for qualifying requirements and other information that may help in the registration process.
In the covering letter, the candidate must mention whether or not:

It is a Venture Capital Fund registered with SEBI. If so, give specifics.
Undertaking the activities of an AIF prior to such application. If so, give specifics.
It is filing an application to register a new fund.

The applicant will submit the following as part of the registration process:

Form A, duly filled out, numbered, signed, and stamped.
Rs. 1,00,000/- in application fees, payable in Mumbai by bank draft in favor of "The Securities and Exchange Board of India."

The applicant must also submit an online application in accordance with SEBI's requirements, which are updated from time to time.

Certificate of Registration is issued.

When considering whether or not to issue registration, SEBI will consider the standards established through the Regulations. If SEBI is satisfied that the applicant meets the Regulations' requirements, the application will be approved and the applicant will be notified.
Upon receiving approval from SEBI, the applicant must pay a registration fee of Rs. 5,00,000/- (if the applicant is not a Venture Capital Fund) or a re-registration fee of Rs. 1,00,000/- (if the applicant is a Venture Capital Fund) to SEBI by bank draught in favor of "The Securities and Exchange Board of India," payable at Mumbai.
SEBI will issue the applicant a certificate of registration as an Alternative Investment Fund after confirmation of the registration/re-registration fees.

Vehicle Scrapping Business in India

2021-12-16T03:38:00.005-08:00

Scrapping is a very lucrative business where you can make a lot of money by scrapping junk vehicles. Vehicle Scrapping Business in India is a very new and profitable business opportunity. In India, the rules are a bit different from the rest of the world, but the business is still the same. You can either deal directly with an auto dismantler or buy vehicles from auto dealers.

Current Scrapping Situation in India

In our country, the vehicle scrapping business has been growing day by day. There are many dealers who are dealing with Vehicle Scrap Dealers in India and earning huge profits from them. They buy all kinds of scrapable vehicles for recycling purposes and earn huge profits from it. There are many benefits that can be taken from the vehicle scrapping business like low investment, good profit margin.

Scrapping Business in India

Vehicle Scraping is a booming business in India. If you have a space for vehicle storage and a place to cut metals, you can start your own Vehicle Recycling Business but you have to apply for licenses and permits from the pollution authority. You can earn a good profit by selling these in the market.

Success Tip

The real success in this business depends on the quality of the vehicle scrap material which is used. Quality checks are very important while calculating the price of scrap metal. There should be no rust, scratches, or any other damages on them. The end buyer will ask for the weight certificate as well as the quality certificate before buying them.

If you want to recycle waste vehicles, it's not enough if you just have space for storage and a place to cut metals. It is better to find an investor to invest in your business idea and find a consultant to guide you to legal advice related to permission and permit, license so that you can expand your business easily and make more profit out of it.

Pradhan Mantri Gramin Awas Yojana

Insurance Company License with corpseed

2021-12-15T03:36:00.002-08:00

If you want to start your own insurance company, then you need to obtain an insurance company license. This article will teach you how to obtain an insurance company license. Insurance Companies are licensed by the Insurance Regulatory and Development Authority of India (IRDAI), Ministry of Finance, Government of India. The Department of Insurance is a regulatory agency that regulates the insurance industry and public insurance.

Criteria for Getting an Insurance Company License

Any company that falls into the defined category of businesses
Any company that has been approved by the IRDAI.
Any Limited Liability Partnership (LLP) formed under the LLP Act of 2008.
The company's net worth should be at least Rs.10 lakh.
When it comes to LLP registration, the registered name must include the words "insurance marketing firm."

How to Get a License for an Insurance Company

To begin the process, the individual who wants to start an insurance company must first fill out Form IRDA/R1 and submit it along with the required documents, which include:

The company's certificate of incorporation (Companies Act 2013).
Copies of the charter documents that have been certified (Memorandum of Association and Articles of Association).
A five-year business plan that has received the Board of Directors' approval.
All of the directors' information was verified, including their names, addresses, and occupations.
A certified copy of the paperwork detailing the Indian promoters' and international investors' shareholding agreement.
Certified copy of the Indian promoters' and foreign investors' annual reports for the previous five years.

Registration Refusal for Insurance Registration

The applicant's application for insurance registration may be denied for the following reasons:
Incomplete or incorrect information;
Information is not provided promptly; there is a delay in giving information.
Non-compliance with capital requirements;
Management's improper behavior;
Any other matter that the Authority deems appropriate.

Connect with Corpseed to Insurance Company License

Provide all relevant documentation for Insurance Company License. We will assign a professional Consultant who is experienced in managing the Insurance Company License process with IRDA. Our Insurance liaison expert will discuss with you and guide you through the entire process of obtaining an Insurance Company License for your business. Our professional consultant will draft the application and submit it to the IRDA then we will send your license via mail or courier or you can directly call us at +917558640644 to know more.

Read Also:

Solid Waste Management And Recycling Plant Setup: Importance, Process, and Benefits

2021-12-13T03:27:00.006-08:00

As we all know that solid waste management is a complex process in this era, and as we tried to recycle as much as possible it can reduce the amount of waste in a community and make it a cleaner place to live. The main objective of a solid waste management system is to divert waste from landfills. This is accomplished through source reduction (reducing the amount of waste generated), recycling, composting, or other methods. Solid Waste Management Recycling Plant Setup is a cost-effective and eco-friendly way to deal with solid waste.

Solid Waste Management And Recycling Plant Setup

Solid waste management is a broad term for the storage, collection, transport, processing, and disposal of solid wastes. It includes municipal solid waste management (MSW), industrial solid waste management, and medical waste management. The types of solid waste generated include municipal trash, construction and demolition debris, mining residue, and other forms of urban and industrial waste. Waste handling and disposal are seen as a major environmental concern due to their negative effects on the ecosystem through the land, water pollution, and air pollution.

Solid Waste Management Recycling Plant Setup Process

In the treatment of solid waste, mechanical processing is the physical, chemical, and biological reduction of waste by means of machinery. Solid waste processing includes a variety of methods to reduce the volume or hazardous nature of the waste, and prepare it for recycling or disposal. Waste processing is used to both recycle useful material and destroy or remove undesirable components. Methods include:

Mechanical separation - Physical separation
Shredding - Grinding
Sizing - Separating into different materials based on size
Sorting - Separating into different materials based on characteristics such as color or density
Grinding - Mixing with water to separate out organic materials, using air to extract fibers
Flotation - Mixing with water to separate out organic materials, using air to extract fibers
Magnetism - Separation based on distinctive magnetic properties in metal objects

Why it is important to manage Solid Waste?

It is important to manage Solid Waste because it affects the environment. Solid Waste has a major impact on our health and safety and also has an effect on the economy. Solid Waste is any material discarded from a particular area, that does not decompose within a short period of time, such as garbage, trash, junk, solid or semisolid waste material. Solid waste can be considered to be non-biodegradable material, which remains intact after passing through the digestive system of animals and/or the biochemical processes of plants.

Investment in solid waste management has three main benefits:

Cost savings - Reduction of unnecessary costs associated with landfills
Benefits to public health - Reduction of the risk of disease transmission from uncontrolled wastes, resulting in improving public health.
Reduces environmental impact - Control over pollutants reduces the harmful effects on the local environment caused by poorly managed wastes.

Pollution Control Board NOC From State

2021-12-11T03:15:00.004-08:00

A Pollution Control Board NOC is a certificate that is required in India to register your company. The same will be given by the Pollution Control Board which are various locations in the country so you have to check with them about the issuance of certificates for registering your firm or industry.

What is the role of the Pollution Control Board?

In India, the Central Pollution Control Board (CPCB) is a pollution monitoring agency under the Ministry of Environment & Forests. It is responsible for monitoring and assessment of pollution in India and also keeping a check on industrial emissions throughout the country. It acts as the national authority for the implementation of various international conventions on the protection of the environment. People have the notion that the pollution control board is responsible only for monitoring air and water pollution levels. This is not true. The pollution control board oversees the entire gamut of environmental issues including noise control, solid waste management, and even wildlife protection. The board has been actively working towards creating a sustainable environment for years now and has taken many steps to make this possible.

How to obtain the necessary NOC from Pollution Control Board?

Obtaining the necessary No Objection Certificate (NOC) from Pollution Control Board is a compulsory step when you are starting your factory. This procedure is completed when the factory authorities, submit necessary information and documents to their local pollution control board. There are two ways to get a NOC from the State Pollution Control Board. One is to get it from the concerned department of the state government. The other is to get it from Corpseed, corpseed is the legal advisory company. Both these give NoCs for setting up any industry in India.

The no-objection certificate (NOC) is necessary for setting up industries that may have an adverse impact on the environment and public health. For example, if your business idea requires you to set up a factory, then you'll need a NOC from the Pollution Control Board (PCB) under the Ministry of Environment and Forests.

There are two sorts of consent that business owners must obtain:

Consent to Establish (CTE): According to the Pollution Act, this is the first level of approval necessary by the Pollution Department in order to establish a business unit while taking into account all levels of pollution (water, AIR, and noise). In order to minimize any loss of money owing to a lack of expertise, the corpseed team assisted with the initial guidelines.
Consent to Operate (CTO): This is the second level of approval necessary from the pollution department to ensure that the business unit does not pollute the environment (water, air, or noise) while operating.

Why do we Need a Pollution Control Board?

It is important to obtain the necessary NOC before starting a business, as it protects you against liability and acts as proof that you have obtained all necessary approvals from the authorities concerned. The necessary NOC from Pollution Control Board should be issued only after the application has been approved by PCB.

The pollution control board NOC comes with certain benefits which include:

Certainty of compliance: One major benefit of having a pollution control board NOC is that it provides certainty of compliance to businesses. It means that you can be compliant with all environmental regulations
The legal And regulatory framework of your business
Help in the Development

The Role of Corpseed

"We help industries to get NOCs, CTO, CTE. We also help them obtain environmental clearance (EC), permission for the effluent treatment plant, complete recycling plant setup, and hazardous waste handling."

Apply for NOC From State Pollution Control Board with Corpseed- Certificate

2021-12-11T01:33:00.001-08:00

Are you interested in pollution Board NOC? Looking for ways to start industry in India? Or interested in opening a new business? If the answer is "yes", then you've found your solution! Team corpseed will help you to get NOC from the pollution control board. In order to manufacture their products, many companies need to seek licenses, clearance or NOC from various government authorities. As per information available publicly, Pollution Control Board is a Government Organization in India, India responsible for enforcing pollution control laws, regulation polluting industrial units, and adopting cleanup measures, NOC for plant setup.

Various functions of the central pollution control board are:

Controlling the air quality
Pollution and water quality
Programs for the city
Municipal solid waste rules
Environmental data statistics
Rules and regulations for Noise Pollution

What is Pollution Control Board NOC Process?

The process of applying for NOC from the Pollution Control Board is interesting and effective to avoid legal issues for industries. This Pollution Control Board NOC Process includes three steps which are application, checking, and granting of the permit.

Without NOCs it is not possible to legally operate any industry or set of industries in any city or district in India. A Pollution Control Board (PCB) issues the NOC under the Prevention and Control of Pollution Act, 1981. The PCB gives a NOC after studying various aspects and ensuring that conditions specified by them are complied with by an applicant for the grant of a NOC. This document is valid for a period of one year which can be renewed from time to time, dependent on compliance. These standards are notified to all the State Pollution Control Boards and Central Pollution Control Boards.

On their individual websites, applicants must fill out specific state pollution control board application forms. For your convenience, we've listed some of the most important state pollution control boards below.

https://tnpcb.gov.in/ Tamil Nadu Pollution Control Board
https://kspcb.gov.in/XGNE.html is the login page for the Karnataka State Pollution Control Board.
https://hppcb.nic.in/hpspcb (Himachal Pradesh State Pollution Control Board)
Maharashtra Pollution Control Board at https://www.mpcb.gov.in/node
https://www.dpcc.delhigovt.nic.in/ is the website of the Delhi Pollution Control Committee.

What are the types of NOC?

The required pollution control board requires one of two types of clearance:

Consent to Establish: The CTE stands for Consent to Establish. This type of permission is required from the authorities in order to start or run a manufacturing unit.
Consent to Operate: The consent to operate is the second type of consent (CTO). This permission would be required in order to verify that the industry adheres to operating requirements. This type of permission is required in every industry.

Under the NOC Pollution Control Board, which industries are required to have CTO/CTE?

The NOC Pollution Control Board requires CTO/CTE in the following industries:

Industries that make things like manufacture
Sectors and Institutions in the Health-Care Industry
Industries in E-Waste Management-Related Sectors
Industries that deal with solid waste
Hazardous Waste Management Industries
Entities of battery waste management
Entities that deal with plastic waste
Industries involved in the management of bio-medical waste.

Category Industries which is regulated by the Pollution Control Board

Different businesses have been categorized by the Central Environmental Protection Board and pollution control authorities depending on the proportion of pollution they produce. This categorization would fall under the Water (Prevention and Control of Pollution) Act of 1974 and the Air (Prevention and Control of Pollution) Act of 1981, respectively.

The List of Industries Categories under the pollution control board is As Follows:

White Category
Red Category
Orange Category
Green Category

Connect with the team corpseed to discuss specific requirements for your business at 7558640644

Vipan Thakur

NOC From Uttar Pradesh Pollution Control Board NOC | CTE| CTO| Certificate| License| Registration

2021-07-23T04:48:00.007-07:00

In this article, we'll discuss the Pollution Board NOC, documentation, and procedure. It is important to have a Pollution Board NOC if you plan on starting any business, construction, or industrial project in Uttar Pradesh. A Pollution Board NOC should be secured before you start construction, business on your property. There are various steps to follow that will help you get the appropriate permissions for your business and ensure that it is legal as well. Read on to find out more about how to get a pollution board NOC or UPPCB certificate in Uttar Pradesh.

Procedure to Get NOC from State Pollution Control Board

Before starting or establishing an industrial business in India, it is important to not only register the business with the appropriate authorities, but also to obtain a license from that authority to ensure that the enterprise being developed does not harm living beings or the environment. Non Objection Certificate, or (NOC from UP Pollution Board), that clearly declares that the firm being established has no intention of harming the environment or harming human life.

It is important to follow the proper method and application drafted in the proper format and include all necessary documentation. Furthermore, the applicant registration fees also.

The business is then visited in person by authority employees who audit the site for working conditions and then after approval given by the Pollution Control board.

UPPCB Consent Certificate

A UPPCB Consent Certificate is a document that must be obtained for any project that requires UPPCB approval. It includes your agreement for the regulatory agency to monitor the progress of your project and ensure that it follows all regulations.

If you want to do any development, waste management, or demolition work in an area governed by the UPPCB, you'll need this certificate. It's also possible to get it if you're applying for a license or permission from the same organization.

UPPCB Consent Certificate (Uttar Pradesh Pollution Control Board): Who Needs It?

Businesses that manufacture products
Health-Care Organization
Traders
Organizations in responsibility of e-waste management
Organizations in responsible of solid waste management
Agencies in Responsibility of Hazardous Waste Management
Organization in responsibility of battery waste management Battery
Entities in Responsible of Plastic Waste Management
Organization in care of biomedical waste management

What Documents Are Necessary to Obtain Establishment Consent?

The following documents must be filed alongside the structures:

Pan card
Aadhaar card with a valid mobile phone number
A cover letter describing the type of industry and activities that the company expects to engage in. The letter must include all necessary information about the product or services that the company will produce.
Copy of a sale transaction or a lease deed.
If it is an organization, the moa and aoa must be provided, or a copy of the partnership deed must be provided if it is a partnership company.
The business's site plan and design plan.
Within two kilometers of the business, a schematic map shows roadways, forest areas, rural fields, neighborhoods, and other relevant zones.
Complete details of each item to be produced via the company's production process.
A copy of the land use certificate, as well as any land use change certificates.
A chartered accountant verifies the auditor's certification.
Detailed information on the wastewater and subsurface water balances
A copy of the fee for consent
Municipality/local body water connection certificate, copy of groundwater report
Proposal for a sewage treatment plant (stp) including all of the nuances of the treatment technique to be used and the way of waste removal by various units of the units.
If your business sells food, you'll need an fssai certificate.
Procedures to follow if hazardous substances are used, as well as data on material safety
Environmental clearance certificate.
Valid import permission from the state pollution control board, as well as a signed undertaking from the buyer (only for import application)
Agreement on biomedical waste (only for clinics and hospitals)
Certificate from the medical council (only for clinics and hospitals

Click to know Wikidata of Corpseed

FSSAI Registration Under Food Safety Compliance System (FoSCoS): Guidelines

2021-05-01T06:25:00.009-07:00

The Food Safety and Standards Authority of India (FSSAI) was established under the Food Safety and Standards Act, 2006, which consolidated a number of acts and orders that had previously dealt with food-related issues in various Ministries and Departments. The Food Safety and Standards Authority of India (FSSAI) was constituted to establish science-based standards for articles of food and to regulate their manufacture, storage, distribution, sale, and import in order to ensure the availability of safe and wholesome food for human consumption.

Why is it Necessary to Register FSSAI?

Any FSSAI Registration or License must be compulsory to each food business operator involved in the manufacture, processing, storage and distribution of food Products. FSSAI Registration is not FSSAI License in that FBO should obtain the necessary registration or licence in accordance with its size and nature.

The registration is 14-digit or the licence number is printed on all food packs. The registration number of 14 digits gives details about the assembly status of the producer. This process of registration seeks to increase the accountability for food products to the FBO in order to preserve their quality. Regulation and regulations for licencing and registration are set by the Food Safety and Standards (Food Business Licensing and Registration) Regulations, 2011.

Procedure for Obtaining FSSAI Registration

A passport photo and photo ID are the common documents required for basic registration.

The following additional documents are required for state and fssai central license apply:

A completed and signed Form B
Address proof
List of food categories and products
Water test report
Import Export Code
NOC from municipality
Incorporation certificate
List of directors/partners
Layout plan of the proposed location
List of equipment
MOA and AOA

For Basic Registration:

PAN of the proprietor /Directors/ Company
Passport size picture of proprietor /Directors
Declaration
Certificate of Incorporation / Partnership Deed / MOA & AOA
Address proof of proprietor /Directors ( Aadhar, Passport, Voter Card, DL etc)

The Advantages of Obtaining an FSSAI Food License

Licensing will provide legal benefits to a food business, as well as help it create goodwill, ensure food protection, raise customer awareness, and expand. It also helps in the regulation, production, storage, distribution, and sale of imported foods.

FSSAI License Renewal

The FSSAI license is required for the start-up of the food business, as well as the renewal of the license. The license is valid for one year or five years and must be renewed 30 days prior to the expiration of the current license. FSSAI has started an online application portal called the Food Licensing and Registration System (FLRS) that allows businesses to apply for licenses via the website but now the website change into Food Safety Compliance System (FoSCoS).

Plastic Recycling In India and Challenges

2021-04-10T01:29:00.005-07:00

Plastic pollution has become an increasingly serious issue in India over the years. With an increasing dependency on plastic, the practice of discarding plastic in a careless manner has become commonplace. Several waste to wealth mechanisms have been implemented over the years to recycle and reuse plastic in novel ways. Converting plastic waste to fuel and making it available for both domestic and industrial purposes is one such pattern. Given India's massive daily production of over 15,000 tonnes of plastic, the potential for conversion to fuel is vast, assuming adequate infrastructure is available.

Plastic to fuel conversion has already been successfully applied in countries such as Japan, Germany, and the United States. These three have also been active in turning conversion processes into viable business models. Though India has a long way to go in terms of adopting plastic as a business model, progress is being made in the conversion of plastic to usable fuel.

Challenges of Plastic Recycling

Waste Collections /Unauthorized Waste collectors

1. Non-segregated recycling contaminates clean waste

2. Geographic spread of waste generally requires a large number of workers for collection and transportation

3. Unorganized collection/rag picking, which puts one's health at risk

4. Disposal without discrimination, resulting in pollution of soil and field Water is a natural substance.

Other Uses of Plastic Waste

1. Illegal burning of untreated plastics, resulting in toxic gas emissions and severe health consequences.

2. An unorganized and uncontrolled supply chain.

3. Illegal recyclers use dangerous technologies due to a lack of expertise.

Appropriate Technology for conversion

1. The nation needs proven and developed technology.

2. Low economic size, resulting in non-viability.

3. Low volume of plastics and geographically dispersed.

Stable End product Quality related

1. An inconsistency in the waste mix (Inputs)

2. The probability of end-product quality variability, leading to a loss of trust and non-acceptance by end users.

3. The dangers of reverse engineering

Government Policies & Assistance

1. A lack of enforcement of other prohibited uses of plastic waste.

2. Making the informal collection process more formal.

3. There are no incentive programmes in place to encourage the recycling of plastics and the use of recycled fuel.

Marketing & Market Competition

1. The customer's lack of faith in the product's reliable quality

2. The lack of proven evidence on its full proof end use

3. Cost-effectiveness in comparison to conventional fuel

4. Competing with other waste plastic uses

5. Diesel / Electricity Subsidies

Human Psychology / Acceptance

1. Consumer rejection / non-acceptance as a waste product

2. Lack of confidence

3. Fears about equipment or engine damage if recycled diesel is used.

Objective for Recycling

Resource recovery and recycling plants will help to ensure environmental sustainability.
Demonstrate a regionally coordinated approach to recycling, recovery, and safe disposal principles.
Serve as a role model for others to follow in terms of multiplication.
Demonstrate recycling strategies and processes like plastic recycling to fuel plant setup and proper recycling setups.
Serve as a platform for environmental education and public awareness.
Recycling education

How is hazardous waste treated?

2021-04-09T05:29:00.003-07:00

Special types of thermal equipment are used to burn waste in either solid, liquid, or sludge form. The fluidized bed incinerator, the MHF, the revolving oven as well as the liquid injection incinerator, are included in these systems. The potential for air pollution is one concern posed by hazardous waste incineration.

One method used to treat hazardous waste biologically is called landfarming.

In this technique, the waste is carefully mixed with the surface soil on an appropriate land area. Microbes that can metabolize the waste can be added along with nutrients.

Learn more about hazardous waste recycling methods and plant setup guidelines.

The Environment effect of Plastic Waste?

2021-04-09T03:22:00.003-07:00

What is EPR (extended producer responsibility)?

2021-04-06T22:58:00.007-07:00

Extended producer responsibility (EPR) is a waste management technique that involves adding all of the environmental costs associated with a product over its life cycle to the market price of that product. EPR uses financial incentives to motivate manufacturers to design environmentally sustainable goods by keeping them accountable for the costs of end-of-life management.

Reuse, buyback, or recycling programmes are both examples of EPR. The producer can also opt to assign this duty to a third party, known as a producer responsibility organisation (PRO), which is paid by the producer to handle used products. In this way, EPR transfers waste management responsibility from the government to the private sector, requiring manufacturers, importers, and/or sellers to include waste management costs in their commodity prices and ensuring that their goods are handled safely.

In response to the growing problem of excessive waste, a number of countries have implemented waste management policies that require manufacturers to either take back their goods from end consumers at the end of their useful lives, or to partially fund a collection and recycling infrastructure. These policies were implemented due to a shortage of collection facilities for some items containing hazardous goods, or the high costs of delivering certain collection systems to local governments. These take-back laws' primary aims are to collaborate with the private sector to ensure that all waste is handled in a manner that protects public health and the environment.

Advantages of Extended producer responsibility (EPR)

One of the advantages of EPR is that as the policy puts pressure on countries that export E-waste, it becomes more and more successful. The regulation of E-waste forces infrastructure to either deal with the waste or introduce new ways for producers to create goods. When more countries implement these policies, it becomes more difficult for others to ignore the problems.

Implementation

EPR has been applied in a number of ways, which can be categorised into three categories:

Mandatory
Negotiated
Voluntary

EPR allows producers to establish market demands for the reuse, buy-back, or recycling of their products at the end of their useful lives. O n the other hand, The informal recycling economy poses a major challenge to the quality of recycled materials and the traceability of buy-back transactions. Plastics are a form of material that can be For improvement, the recycling supply chain's quality assurance mechanism is being strengthened. Our team will help you to get extended producer responsibility authorization, just connect with team corpseed or call us @ +91-7558-640-644

How to Start Solid Waste Management Recycling Plant?

2021-04-05T22:57:00.002-07:00

Waste management is a concern that should be addressed critically. Waste management should include waste formation, collection, processing, and removal, as well as resources, environmental security, source protection, increased efficiency, and overall jobs, according to the system approach. A waste management system should address the elimination of waste from the human environment as well as the protection and improvement of human health.

Wastes and waste management have become a neglected problem for years, and it is time that we consider the negative impact on natural ecosystems. Waste has risen as a result of population growth, technological advancement, industrialization, and urbanization, both of which are increasingly growing and evolving consumption patterns; it has also become an important concern for the environment and human health in recent years.

Solid Waste Management

The preservation of the environment and the population's wellbeing are the most critical aspects of solid waste management. Almost every city in the country is challenged by solid waste issues. Solid waste management is an important part of raising public consciousness about sanitation and public health. Refuse and waste can pollute the air and water. Spoiled garbage is also known to contain poisonous gases that mix with the air, causing contamination and respiratory problems in humans.

In order to efficiently handle waste in a solid waste recycling plant setup, a number of processes are needed. Collection, transport, treatment, recycling, and disposal.

Required Documents for Authorization

Aadhar Card Authorized Signatory
Pan Card with Authorized Signatory
The bill of Electricity
Flowchart of the Process
Ownership proof/lease deed/sale deed
CIN
MOA is a term that refers to
Plan of action
GST GST Certificate Board
Declaration of Approved Signatory
Factory License/ Trade License

The waste management industry has its own set of problems. Understanding these foundations is important for the entrepreneur to build a strong base.

The Financial Investment Required For Establishment
The Business Select A Field In The Waste Management sector
Conduct a Business Research
Conduct a Business Research
Prepare a business plan.

How does a electronic recycling business make money?

2021-04-05T05:52:00.004-07:00

As the amount of e-waste continues to rise, the electronics recycling industry is becoming more significant, paving the way for its expansion. Because of the enormous increase in consumer electronics, there is an ever-increasing amount of end-of-life electronics that must be recycled. This material is more than trash; it can be a health and environmental risk.

How does an electronic recycling business make money?

They earn revenue by selling recyclable materials to processors. They collect electronic waste and sell it to clients who will repurpose the products in the manufacturing process.

According to the report, 5 tonnes of e-waste (roughly 183 computers) generates a huge profit of Rs 1,78,308. The math is straightforward: The cumulative value of the recoverable materials from 183 computers would be Rs 2,88,108, based on a conservative estimation of the materials recovered. 183 computers (from different market sources) cost approximately 183x600 (including logistics) = Rs 1,09800. This equates to a gross margin of Rs 1,78,308 for the recycler.

First, know about E-waste Mining

E-waste mining is a method of extracting precious resources such as gold, copper, iron, and plastic from the circuitry of computers and cellphones using methods similar to those used by miners to process metal ores.

Recycling E-Waste Has Its Benefits

Recycling e-waste would not only help to remove waste, but it will also help to reduce emissions levels.

Steps to Starting an E-Waste Recycling Business

Make a plan for how you'll start your business: This is the first and most critical step, as you must ensure that you are completely knowledgeable about the various types of businesses that you may start. You may also choose whether you want to co-own the business in a partnership, run it independently, or operate through a limited liability company (LLC). Only then would you be able to receive a license.
Separation of Useful and Non-Useful E-Waste: You'll need to find a strategy for identifying between waste that can be recycled and waste that can be refurbished into useful items. Most significantly, you get to choose where your usable waste will be disposed of. As a result, before thinking about expanding, you may want to start with something that you can easily contribute to with the resources at your disposal. You will then extend your list of recyclables in the near future based on your strengths.
Obtain the Required Licenses: It is impossible to substitute getting a proper credential. As a result, make sure you've followed all of the rules and regulations that apply to the state where your company or plant is based (to avoid breaking any laws).
Obtain the Necessary Resources: You'll need to figure out where you'll get the money you'll need to get started, and whether you'll buy or lease the equipment you'll need. Remember that proper recycling necessitates the use of the appropriate equipment to complete the task in a timely and effective manner.
Choose the Best Location for Your Recycling business: When choosing a site(industrial location), you must consider a variety of factors, including public access for dropping off recyclable materials and picking them up on a regular basis before transporting them to a recycling facility. Depending on the situation, you may want to rent a small stall or a warehouse.

Plastic Waste Recycling Business in India

2021-03-03T03:48:00.001-08:00

Plastic is a common product that is now used by almost everyone on the planet. Because of its lightweight and compact nature, plastic is used in a number of applications. The amount of maintenance needed is small. Packs, bottles, containers, and food packets are all popular plastic products. A plastic is any of a large and diverse group of materials that contain carbon, oxygen, hydrogen, nitrogen, and other organic and inorganic elements as basic ingredients. Though solid in its finished state, it has been or can be flow-formed into various shapes at some point during its manufacture—usually by the application of heat and pressure singly or in combination. They play a major role in the economies of all developed nations. Plastic, while being a very useful material that is versatile, durable, and rigid, becomes waste after use and pollutes the environment.

Recycling is used to protect the environment while also maximizing the use of plastic. The process of reprocessing used scrap and waste plastic into new plastic material is known as plastic recycling. Recycling old plastic products saves 20 percent to 40 percent of the energy needed to produce new plastic products. Plastics come with a plastic identification code that helps with recycling by recognizing the various polymers used in the production of plastic.

Starting a Plastic Recycling Business

Starting a plastic waste recycling business is not for the faint of heart. You can only consider starting this business if you have the requisite experience. What you should know about the plastic recycling industry is that it includes the processing, sorting, and recycling of plastic waste.

Opening a plastic recycling business allows you to be actively involved in the process, from gathering scraps to selling them to a consolidator for processing. It is one of the most serious businesses, needing a large amount of investment.

The best part is that, considering the market for "green businesses," it is thought to be a very profitable business. It's vital that you start working as soon as you have the requisite plastic recycling machines. The thermoplastics, which soften quickly when heated, are easily recyclable plastics. Thermosetting plastics, on the other hand, are not ideal for heating because they harden when heated. So, when you first start out, you'll be primarily concerned with thermoplastics. Heating caused the material to harden. So, when you first start out, you'll be primarily concerned with thermoplastics.

Machinery needed for recycling

Since it is a large company, you need a lot of machinery to keep things going smoothly. Various types of machinery will also be required for each step of recycling. These may include-Bale Breaker, Metal Detectors and Separators, Shredders and Granulators, Pre-Washing Systems, Rinse Dryers, and many other types of machinery. So now you can know that it's not going to be easy for you, and you're supposed to have big capital before you get into this business.

The Business should be licensed.

Plastic recycling startup business registration and An NOC certificate from the pollution board is required for businesses such as recycling plastic.

Benefits of Plastic Recycling

It would assist in the reduction of greenhouse gas emissions and, as a result, energy savings. It contributes to the conservation of oil and gas. It will also provide a livelihood to a large number of people. To begin your business, you must first decide who will supply you with the scrap plastic that you will recycle. You should also be aware of the plastic's thickness, whether it will be wet or dry, and the form of thermoplastic they will supply. Often, mention the rates that they will charge for the same ahead of time. It is important that the location for establishing the business be remote and not in a city with a large population. It is expected to have access to the water treatment system. You'll be operating around a lot of dirt, so you and your staff can take care to avoid catching any big diseases.

Manage your plastic waste into a valuable product

2021-03-01T04:02:00.001-08:00

Plastics themselves aren't a problem; it's their management that has proved difficult. Land-based activities harm the environment, especially marine life. Every day, India's urban areas produce about 26,000 tons of plastic. Plastic waste accounts for 6.92 percent of urban solid waste, according to the Central Pollution Control Board.

The Plastic Waste Management Rules of 2016 state that urban local bodies (ULBs) should prohibit the use of less than 50 micron thick plastic bags and that recycled plastics should not be used to package food, drinks, or any other eatables. Local governments must also have a separate collection, storage, and recycling of the plastic waste in their jurisdictions, according to the rules.

What can we make from Plastic?

1. Recycling is one thing that we can all do to help protect and improve the environment. A plastic bottle today could hold juice, water, or soda... But, after you've used it, what will it become?

Let's look at some common plastics and what they can become.

Plastic Milk Jugs and Other Containers, Milk, shampoo, laundry detergent, and household cleaner’s bottles and containers are lightweight and tough, but they're usually made of a different type of plastic than beverage bottles.

What are the possibilities for them? They can be recycled into new bottles and containers, plastic lumber, picnic tables, lawn furniture, and playground equipment, among other things.

2. Packs and wraps made of plastic we take our groceries home in plastic bags. They ensure the freshness of our bread and other foods. They even let us take goldfish from the pet store home with us. Thousands of supermarket and discount stores, like most Target, Walmart, Lowes, Safeway, and others, now embrace these bags for recycling. Also, many of the plastic wraps that cover the products we purchase (including bubble wrap!) can be recycled at many of these sites.

What are the options for them? Plastic bags and wraps can be recycled to produce plastic lumber, which is used to make park benches, garden decks and fences, and even playground equipment.

3. Bottles, Soft drinks, juice, and water bottles are a convenient way to quench thirst...

What are the options for them? T-shirts, sweaters, fleece coats, insulation for jackets and sleeping bags, carpeting, and more bottles can all be made from recycled plastic bottles.

To make enough plastic fiber to make a cool new t-shirt, it takes about ten bottles.

A sweater is made up of 63 bottles.

It only takes 14 bottles to make enough fiberfill (insulation) for a ski jacket. And 114 bottles to fill a sleeping bag with adequate insulation (fiberfill). In the United States, nearly 29.3% of plastic bottles are recycled. We can do much better if everyone joins in.

4. Caps for bottles, Plastic caps on bottles keep the soda fizzy while also keeping bugs and debris out. Even though the caps are made of a different form of plastic than the bottles, you can replace them before tossing them in the recycling bin.

What are the options for them? Bottle caps may be recycled into car batteries, garden rakes, storage bins, and reusable bags, shopping bags, yarn, ropes, brooms, and more bottle caps.

5. Packaging made of foam More than 95% of the air in plastic foam packaging is air! It covers and cushions your television and video game console as they fly from the factory to the store to your house.

What is it capable of becoming? Innovative recycling projects may transform foam packaging into plastic items like insulation, photo frames, and home building materials as well as some packaging made of foam.

Therefore if we adopted all these recycling techniques then it will be very easy to make our environment clean, and we can also come up with a new solution for plastic recycling.