windows, internet, pc, mobile, gadget, tips and tricks. Full mp3 download.

How to avoid android heating problem.

noreply@blogger.com (kashif) — Thu, 03 Nov 2011 10:57:00 +0000

We are becoming more and more dependent on our smartphones and tablets, as they seem to become an universal device that you can use to access the information that is so important nowadays. This isn’t a bad thing, but when you depend so much on a single piece, you have to be responsible with it, to take care of it. That’s why when your Android smartphone or tablet heats up, you start to worry and ask different questions: * what have I done? * should I buy another phone? * does Android suck? * what’s causing the heating? * what can I do to prevent my device from heating? 1. What’s Causing The Over-Heating? Yes, I know, when you invest around $500 in your digital buddy, it’s quite hard to “let it go” just because you have over-heating problems. But, don’t worry, with moderate use and some steps that you must take, you will avoid ditching your Android and will continue using, at least until another tech beauty catch your eyes. Small Size The most simple explanation would be the small size and lack of ventilation. Our desktop PC’s, laptops, printers, TV’s also have heating issues but they are well ventilated, so that the plastic and the metal pieces are being cooled down. How do we use our smartphones and where do we keep them? That’s right, in our warm palms. Some of use use the tablet on solid surfaces, but that doesn’t help too much, as, obviously, it doesn’t leave space for the handset to “breathe”. Excessive Gaming This is another thing that manufacturers should have in mind and maybe they will be able to deploy a small cooling fan inside our smart, yet hot devices. Why does it heat up that fast when you’re playing games? Because you’re soliciting the “mother board” of the smartphone or tablet and it pushes electronic inputs at a much faster rate than when you write a message, for example. Playing a game requires a lot of resources from your phone and it represents the most obvious cause for overheating. Continuous Online Browsing Probably the second most consuming process is the online browsing. First of all, the smartphone or the Android tablet requires either GSM, EDGE, Wi-Fi or 3G connection (4G where applicable, as it is much faster than 3G) to display online content. So it’s a double effort for your smartphone/tablet: first of all it has to support the wireless data transfer, then it has to make use of the video resources available to display the information that you need. And let’s be honest, it can be quite fun to watch funny YouTube videos on your gizmo, right? Old Battery and Inappropriate Use of it You’d think that your Android battery is a part of your gadget, that it doesn’t represent a separate part? Well, think again. Almost all manufacturers buy the batteries and incorporate them inside but they forget to mention that you need to replace them, as their life cycle varies from 300 to 500 charging cycles. You don’t have to count how many times your recharge your smartphone, but if you drain the battery in 1-2 days, then you should change your battery once in 1-2 years. It’s a good investment and should increase its life and decrease the level of heating, as well. Don’t listen to the manufacturers, they will always boast with good battery life, but chances are that after less than one your, you will become frustrated with it. Also, it’s a vicious circle with battery and high temperature. When your Android smartphone or tablet is hot, then it will drain your battery much faster as it will make then ion movement much faster. Also, try and avoid full discharges and don’t recharge only when your Android gizmo has already gone dead. Partial, quicker recharge series are better for the health of your batteries and it will also save you of the stress. Stressing Your Gadget While it Recharges There are some of use who are so in love with their digital friends that they can’t leave them be not even when they are “feeding”. Instead of leaving your Android buddy rest in its recharging dock, you are poking him and asking for more fun. You will see how fast it will warm up if you will not let it recharge. 2. How to Avoid the Over-Heating First of all, you need to be careful about all the above enlisted points and avoid repeating the same mistakes thousands do. That’s why you need to: * Reduce your gaming obssessions * Moderate your online browsing sessions * Take care of your battery and leave your Android pal recharge in piece. Disable Unwanted Functions A few weeks after I bought my Android smartphone, it had all sorts of functions enabled that drained its battery and, obviously, made it over-heat. I strongly recommend that you disable vibrations if you don’t need them; don’t use an “expensive”, moving wallpaper as it use your gadget’s operating memory maybe when you don’t even need it. Be sure to check your Wi-Fi or Bluetooth connections, don’t leave them enabled if you don’t need them as your terminal will keep searching for new networks or other buddies to connect with. Just Turn it Off Have you ever tried to turn your phone off during the day? Or you leave him “awake” even in the night hours? It may sound crazy, but when you don’t need your phone to be on, why don’t you shut it down? There are many people out there who find it hard to shut down their computers, which makes them addicts. But, learn to separate your life from technology and use it only when you really need it. When you sleep, turn it off. When you are in a business meeting, turn it off. It will keep your techno friend “fresh” and ready for work when you need it. Don’t Throw Your Gizmo Everywhere Some of us take their gadgets right before stepping into shower or even after waking up. A few days after you just bought your beauty, you will be careful with it, but after you get acquainted and you get to know all its dirty secrets, it can “bore” you. So, you will leave it around the house, or, even worse, forget it in your car and let it burn under bashing sunlight. What happens if you leave it near another electronic piece? It can magnetize, and, with time, contribute to the over-heating. So, be careful and don’t lose your Android tablet or smartphone in your house, car or yard. Clean Your Smartphone/Tablet No, you don’t have to wash it, but cleaning the battery contacts and puffing it for dust will surely be a great help for it. Dust can infiltrate inside your device through the microphone fan and even infiltrate using the recharging orifice. If you are not sure how to open your Android smartphone or tablet and to pack it back, then run to a phone service nearby and ask them to clean it up. Get A Better One And Upgrade While not everybody can afford buying a new Android smartphone or slate, this will surely help in your over-heating issues. It seems that battery life is being extend year after year, although there are no real plans yet for a real big life cycle and over-heating free pieces. Newer devices have improved operating system and are more optimized which should make them more appropriate for use, thus, cooler and more pleasant in your hand.

Windows 8 Boost Performance

noreply@blogger.com (kashif) — Thu, 22 Sep 2011 11:10:00 +0000

Your PC with Windows 8 will able to boot up within twinkling of eyes. Microsoft focused on optimizing the startup of Windows PCs will continue with Windows 8. According to leaked information Windows 7 customers are undoubtedly already well aware of the fact that the Redmond company has fine-tuned their operating system to boot and shut down as fast as possible. Obviously, the software giant needs to deliver even better startup and shut down performance with Windows 8. Windows 8 PCs will turn on fast, nearly instant in some cases, and are ready to work without any long or unexpected delays. When customers want to check email, sport scores, or play media they love to reach for their PCs because they can get what they want quickly. Microsoft also revealed a few areas that are under consideration, including “Faster On from 0 Watts; Instant Sleep resume performance for mobile PCs; rationalize the user experience for the various on / off states; tools and telemetry for ecosystem optimization; performance tracking, diagnostics and configuration options for enthusiast users.” One important new aspect of Windows 8’s evolution will apparently be the combination of Logoff and Hibernate. The software giant is looking to marry the two Off states for Windows 8 to deliver the fastest possible resume time from 0 Watts. According to leaked note, you will see the following enhancements for Windows 8: multiple, small performance enhancements resulting in a large cumulative impact; remove, reduce, delay – e.g., Windows 7 “Trigger-Start” services; exploit parallelism whenever possible; set hard time caps on the shutdown path; boot layout prefetcher; (Win8) ReadyBoost cache persistent across boot; leverages Hibernate technology to cache most of the core system. We can sure that Microsoft very serious for all over performance of Windows 8 and hopefully we'll see much better windows after huge success of Windows 7.

WIN 7 god mode- 39 shortcuts for win7 and vista.

noreply@blogger.com (kashif) — Thu, 22 Sep 2011 10:58:00 +0000

Here we discuss about a new Windows 7 trick called God Mode. Of course, its not as phenomenal as it sounds. In fact it isn’t even new. Its just to create a folder (rather a shortcut) containing an exhaustive list of Windows 7 options. The trick itself is extremely simple and all the user needs to do is create a folder named “GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}“. The shortcut is basically a globally unique identifier (GUID) which points to the Control Panel. The first potion of the key (i.e. portion before the period) is totally inconsequential. In fact “Test.{ED7BA470-8E54-465E-825C-99712043E01C}” would work just as well (but obviously Windows 7 Test Mode doesn’t sound as juicy as Windows 7 God Mode). Windows Vista (32 bit only) users can achieve something similar by creating a folder named “Master Control.{ED7BA470-8E54-465E-825C-99712043E01C}“. This trick was discovered by Ramesh Kumar and is popularly called the Master Control Panel. Windows Guru Ed Bott has now come up with a large list of useful GUID shortcuts for Windows Vista and Windows 7. GUID for Windows 7 and Vista: AutoPlay: {9C60DE1E-E5FC-40f4-A487-460851A8D915} Computer Folder: {20D04FE0-3AEA-1069-A2D8-08002B30309D} Default Programs: {17cd9488-1228-4b2f-88ce-4298e93e0966} Get Programs: {15eae92e-f17a-4431-9f28-805e482dafd4} Performance Information and Tools: {78F3955E-3B90-4184-BD14-5397C15F1EFC} Personalization: {ED834ED6-4B5A-4bfe-8F11-A626DCB6A921} System: {BB06C0E4-D293-4f75-8A90-CB05B6477EEE} Windows Update: {36eef7db-88ad-4e81-ad49-0e313f0c35f8} GUID Only for Wndows 7: Action Center: {BB64F8A7-BEE7-4E1A-AB8D-7D8273F7FDB6} Backup and Restore: {B98A2BEA-7D42-4558-8BD1-832F41BAC6FD} Biometric Devices: {0142e4d0-fb7a-11dc-ba4a-000ffe7ab428} Display: {C555438B-3C23-4769-A71F-B6D3D9B6053A} Recovery: {9FE63AFD-59CF-4419-9775-ABCC3849F861} Speech Recognition: {58E3C745-D971-4081-9034-86E34B30836A} Troubleshooting: {C58C4893-3BE0-4B45-ABB5-A63E4B8C8651} Plz note that you need to create a new folder and name it according to the format “FolderName.GUID“. While, these shortcuts won’t provide any new functionality, using them you can create your own version of Control Panel containing the most frequently used options.

Baidu is on with Quishi OS.

noreply@blogger.com (kashif) — Wed, 21 Sep 2011 07:44:00 +0000

The popular search engine in China Baidu is said to be working on a smartphone operating system. Quishi mobile OS by Baidu will be copied from Google’s Android OS which is very popular these days and that’s the main reason why Baidu choose Android. Android is based on Linux, which is completely open source and free to anyone who wants to make their own version to distribute. The Quishi operating system will be full featured smartphone OS not just a basic OS with theme and file manager like some other basic Chinese OSs. Though Baidu hasn’t officially announced the operating system but according to news sources Baidu is to be working on their own version of Android and the operating system is rumored to be called Quishi. We can’t say how legal is it for them to copy Android OS but company might have to face legal threats from Google. Baidu want that the Quishi operating system will be an alternative to Android in China and its designed specifically for the Chinese users. China already have lots of alternative market app which providing lots of China only and other pirated application to Android users. And this move by popular search engine in China surely bring a tough competition for Google in China.

Nokia 500 Best ever creation from Nokia.

noreply@blogger.com (kashif) — Thu, 15 Sep 2011 10:16:00 +0000

Nokia 500 Mobile Phone Technical Specifications:

* GSM/EDGE 850/900/1800/1900 MHz
* 3G/HSDPA/HSPA
* Capacitive Touchscreen Display
* 5 Megapixel Camera with Digital Zoom and Autofocus
* Memory Card up to 32 GB
* Symbian Anna OS
* Wireless LAN 802.11 b/g
* Bluetooth
* 3.5mm Headphone Jack
* Stereo FM Radio with RDS
Nokia has today officially announced Nokia 500. The Nokia 500 is an entry level touch screen smartphone that has Nokia’s fastest processor to date, a 5MP camera, a great music and entertainment experience and preloaded with Maps and turn by turn navigation, the Nokia 500 extends Nokia’s portfolio into the entry-level smartphone market without sacrificing quality. Also it comes with the latest Symbian, the Anna and it has a fastest Web Browser and is also 3G enabled.
Nokia 500 Key Features
1 GHz processor and WLAN for fast access to free applications and entertainment.
-Download free applications from Ovi Store
-Enjoy full web browsing with pinch zooming
-Play your favorite tunes from your music carousel
-
Make it your own with changeable covers and multiple home screens
-Express your individuality with colorful, interchangeable back covers
-Personalize your multiple home screens with your favorite applications, themes and pictures

Get your friends’ updates straight to your home screen
-Chat with friends instantly on What’s App and other popular chat clients
-Share your status and get friends’ social networks updates directly to your home screen
-Check your emails on the move

Connectivity
-WLAN 802.11 b/g
-HSDPA up to 14.4 Mbps, HSUPA up to 5.8 Mbps
-Bluetooth 2.1
-A-GPS
-Micro-USB connector and charging
-3.5 mm Nokia audio connector

Technical Profile
-System: WCDMA 850/900/1700/1900/2100GSM/EDGE 850/900/1800/1900
-OS: Symbian Anna
-Dimensions: 111.3 x 53.8 x 14.1 mm (L x W x T)
-Weight: 93 g
-Display: 3.2 inch nHD capacitive touch, 640×360 pixels, widescreen 16:9, 16M colors
-Memory: Internal user memory 2 GB (eMMC), support up to 32 GB micro-SD card

Operating times
-Talk time: (GSM/WCDMA) Up to 7 h/ up to 5 h
-Standby time: (GSM/WCDMA) Up to 500 h/ up to 455 h
-Music playback: Up to 35 h
-Video playback: Up to 5.3 h

Additional Features
-Symbian Anna for faster browsing and enhanced touch user interface including portrait QWERTY keyboard and split-screen messaging
-5 MP camera, video capture
-Ovi Maps with free global drive and walk navigation, Here and Now, and Gig Finder (Please check for availability in your country) to find great events near you
-Ovi Store for apps and other entertainment content
-Music player, stereo FM radio, thousands of free internet radio stations
-Easy access to WLAN through home screen widget

Nokia Standard Sales Package Includes
-Nokia 500 handset
-Nokia Battery BL-4U, 1110 mAh
-Nokia Charger AC-8 or AC-15
-Nokia Headset WH-102
-Connectivity Cable CA-101D
-2 additional battery covers

Nokia Original Accessories
-Nokia Bluetooth Stereo Headset BH-505
-Nokia Mini Speaker MD-11
-Nokia 32 GB microSD Card

Colors
-Black (available from Q3 2011)
-White (available from Q4 2011)
-Battery covers: black, orange, khaki, purple, coral red, azure blue (green, pink, silver dark available from Q4 2011)

The new Nokia 500 Price in India is expected to be around Rs. 9,500

Make your Windows genuine with registry trick 100%

noreply@blogger.com (kashif) — Fri, 29 Oct 2010 13:10:00 +0000

1.Goto "start"

2.Run-type in "regedit"

3.Goto "local-machine-software-microsoft-window s nt-current version-
wpaevents"

4.choose "oobe timer" in the rights panel

5.in the window,delete all the things.

6.close regedit

7.goto start-run-type in "%systemroot%\system32\oobe\msoobe.exe /a"

8.choose the second option "use phone to activate"

9.click "change product key"

10.type in the serial:thmpv-77d6f-94376-8hgkg-vrdrq

11.click "update"

12.click"remember later"

13.after that restart the computer

14.after restart goto start-run-type in "%systemroot%\system32
\oobe\msoobe.exe /a"

15.it should come up with a message"windows activated"-finished!

How to make nokia s40 phone multitasking, minimize apps.

noreply@blogger.com (kashif) — Sat, 17 Apr 2010 11:25:00 +0000

Its been a dream for every s40 users to minimize java applications in their handset, especially for gprs users who need to be online in chat clients while surfing the net and so on.. But due to the inbuild abnormality in the architecture of the phone we are unable to do so..I also searched the www for a working trick to minimize apps in s40 and after a long research it ended up with a website which allows its registered users to create project by uploading reqired applications and combining them together to form a common application in which we can minimize and switch between selected applications.

This facilitates the mob users to switch in b/w the applications pre-selected.
www.multime.org
How to work with multime:
1. Register at the site and login
2. Add your midlets by selecting the my midlets from the rear lefthand side of the resultant window(you can either select apps from your system or from an external source by clicking add by link option)
3. After uploading the required midlets, come back to the my projects and create a new project there.
4. Click on the Add midlets button and check the required apps there
5. Select build to compile them and get the output jar file ready to download
6. After downloading the application, as you launch it, there will be many midlets you added in ur project, and you could use application individually, and all running simultaneously.
7. By default you could minimize application by long pressing * which could be changed
8. To change the key, minimize all apps then press options, here again select options and in default you will find key 42. Press assign and press your desired key for minimizing. Below it, select the key press time in milliseconds.
9. Press options and ok.
10. NjoY !!
Hope you like it.

Free gprs in airtel live.

noreply@blogger.com (kashif) — Tue, 13 Apr 2010 13:03:00 +0000

All these tricks will work on default airtelfun.com access point.
Make only one connection.
Access point.airtelfun.com
100.1.200.99
8080
First of all go back to previous date of 2006 then open service browser and click on https://flyproxy bookmark in the night at about 10,11,12 pm. The browser will start making connection if it opens then it is good if it doesnt open and shows web connection time out or any other error then dont disconnect, let it be connected for whole night and do not close the service browser let it remain open. Now wake up early in the morning at about 4.5.6 am and open opera mini and click on yahoo answers in.answers.yahoo.com bookmark it will show you to change date then change the date then once again click on yahoo answer bookmark it should open. If it doesnt then click on several times at the bookmark one time it will open.
////////////////////////
Another best method is that you dont need to change the date just use it in current date. There would be only one access point airtelfun. first open the service browser and click on flyproxy bookmark. Let flyproxy open, if it doesnt disconnect the connection click once again on flyproxy repeat this method until flyproxy opens. If it shows time out or any other error then no prob Let it be connected for about 5 hours. Till then do not open any other site.Then open opera mini and click on yahoo answers bookmark. It should open if it doesnt close opera click once again on answers bookmark until yahoo page opens.

Make windows 7 xp usb pen drive bootable.

noreply@blogger.com (kashif) — Sat, 27 Mar 2010 12:16:00 +0000

Many of us are so lazy these days that we do n't want to use optical media for any purpose. Now, even Mini laptops do n't include DVD +RW drive in them. My friend having a similar problem came to me, he was not having any optical media drive in hp Mini laptop. So, he asked me about how could he be able to load Windows 7 or Vista into it, and the answer is by creating a bootable usb pen drive. It is very simple to create a bootable USB drive for Windows 7.

Here is the whole guide to create Windows 7 USB installation.
Preparing the USB drive
Get a 4GB or more capacity of USB pen drive, SD/MMC card might also work (not tested by me).
Format the pen drive in NTFS file system and copy all the data of Windows Installation DVD into USB drive.
Click on start and click Run... Type cmd and press enter. Run cmd as administartor.
Now open the USB drive, for example J: drive is my USB drive, I'll type J: and press enter.
Type-
cd boot
bootsect /nt60 J: /force
This will make your pen drive as bootable media, adn you can install Windows, as usual from like from DVD installation.

Google tricks. In im feeling lucky.

noreply@blogger.com (kashif) — Fri, 05 Mar 2010 17:10:00 +0000

Have you ever wondered what the "I'm Feeling Lucky" button does on google? I'm not sure if this is the main reason for it, but here are some things you can do with it. Enter the following stuff into the search box on google and press the "I'm feeling lucky" button.
Google leet
Google goth
Elgoog - Flips
Gahooyoogle
Google easter
Google 1337
Google Loco
Google Goth
Google BSD
Google Linux
Google Easter Egg
Google Mirror
Google Fudd
xx-piglatin
Google mozilla
Google gizoogle
xx-klingon
Google ewmew
Google bearshare
This is not enough?????? then this one is for you...
inurl:/view/index.shtml Enter and hit i'm feeling lucky...
and you could use some of the secret cameras whole over the world...!!!!!!

still not enough????
Type in goglogo and hit i'm feeling lucky...!!!
Type in your name or something and hit enter..you will be taken to the custom Google page...
Set this as your homepage and enjoy customized Google home page 4ever..

Protect your email account from hackers.

noreply@blogger.com (kashif) — Sat, 27 Feb 2010 13:48:00 +0000

Do you suspect that your email account is under attack? Do you want to maintain total security of your email account and make it 100% hack proof? Well, Some times our email account might have got hacked and we may not be aware of that. We may believe that our email account is safe, but in reality our private and confidential information may be falling into the hands of a third person.
Here are some signs of unauthorized activity on an email account.
1. Your new emails are marked as Read even if you've not read them.
2. Your emails are moved to Trash or even permanently deleted without your notice.
3. Your emails are being forwarded to a third party email address (check your settings->forwarding).
4. Your secondary email address is changed.
If you come across any of the above activities on your email account, then it is a clear indication that your email account is hacked.
Additional Security Features in Gmail to ensure the Safety of your Account
Gmail provides an additional security feature to protect your email account through the means of IP address logging. That is, Gmail records your IP address every time you login to your Gmail account. So, if a third party gets access to your account then even his/her IP is also recorded. To see a list of recorded IP address, scroll down to the bottom of your Gmail account and you'll see

that Gmail shows the IP address of last login (last account activity). You can click on Details to see the IP address of your last 5 activities. If you find that the IP listed in the logs doesn't belong to you, then you can suspect unauthorized activity.
Steps to be carried out to stop unauthorized activity on your email account
If you feel/suspect that your account is hacked then you must immediately take the actions mentioned below
1. Change your Password
2. Change your security question.
2. Remove any third party email address (if any) to which your account is set to forward emails.
3. Make sure that you can access the email account of your secondary email address.
4. Also change you secondary email password and security question.
This ensures that your account is safe from future attacks. But I strongly recommend that you read the following post to protect your email account from being hacked.

Download from major filehosting site as premium user.

noreply@blogger.com (kashif) — Fri, 19 Feb 2010 10:10:00 +0000

The download sites like rapidshare, Megaupload, 4shared etc..provide huge files to download that the premium users have uploaded. We can usually download from these sites in two ways..as a Premium user and a Free user..many prefer Free user mode of downloading..but this free user mode is sometimes irritating and we have to wait a huge lot of time to access the download..and when it gets started..they may get broken if your internet connection is no so stable.

Getting a premium account is the right option..but we have to pay money monthly or yearly..
But here I provide a site that provides users with premium type downloading...these sites are...[you have to check in each site if premium slots are available..and enjoy downloading...]
GOTO: WWW.RAPID8.COM
How do I use? (Instructions) :
1) Put a Valid URL/link in the Blue Box on the main/home page
2) Click 'Download'
3) Wait for the download to process.
4) Click 'Begin your download' when it shows
(It might takes some time for the download to appear.
If there's problem, click again.)
5) You should be downloading the file now. Read below for more helps.
Note: Hold "Alt" on your keyboard whick cliking "Begin Download" to bypass IDM to use default FF/IE Downloader
This site supported are listed below:
rapidshare.com
megaupload.com
megashares.com
easy-share.com
megavideo.com
megaporn.com
hotfile.com
netload.in
uploading.com
uploaded.to

Protect your pc from latest internet explorer security hole.

noreply@blogger.com (kashif) — Sun, 07 Feb 2010 13:42:00 +0000

Sure seems like you hear the words "IE Security Hole" a lot, doesn't it? Now there's yet another security hole, and a malicious website could use it to get access to your files-it's not a good thing, but here's some quick tips to protect yourself.
Make Sure You Have Protected Mode Enabled
As with most IE security holes, if you're running Windows 7 or Vista, you should enable Protected Mode, which runs Internet Explorer in something similar to a sandbox-basically it protects you from malicious web pages a little more (though not completely).
Just head into the Internet Options -> Security tab, and click the checkbox.
Set ActiveX Controls to Always Prompt (or Disable Them)
If you just drag the slider in the screenshot above to High, you'll have disabled ActiveX Controls from automatically running.

The unfortunate side effect of this is that you'll be prompted more often when visiting sites that use ActiveX Controls. Microsoft recommends that you add sites that you really trust to your Trusted Sites list... you'll probably have to uncheck that "Require https" checkbox at the bottom though.
To add a site to your Trusted Sites, click the Trusted Sites icon shown in the image above, and then click the Sites button, type in the website URL, and click the Add buttons. Clearly trust is a hard thing to earn...
Extra: Disable Unnecessary Plugins
Open up Tools -> Manage Add-ons from your IE menu, and then change the drop-down for "Show" to say "All add-ons". This will then show you a list of all the current add-ons that are enabled, so we can start disabling stuff.At this point you'll have a massive list of add-ons, and you can start disabling them by clicking on them, and then clicking Disable. Important to note: Adobe Reader seems to have one security hole after another, and if you don't really need Java you should get rid of it.
Use Microsoft FixIt to Solve the Problem
One of the best things that Microsoft has come out with in the recent past is the "Fix it" feature on their support site-for many problems, you can simply launch a Microsoft-created utility that will solve your problem right there.
In this case, you can use Fix it to enable Network Protocol Lockdown. Just click the image below to head to the Microsoft site:
Use Microsoft Fix it to solve the Latest Security Hole.
Read more information about the Latest Security Hole (as of February 4th, 2010)

"ctrl+c" think once again if you are surfing internet.

noreply@blogger.com (kashif) — Thu, 28 Jan 2010 16:55:00 +0000

We do copy various data by ctrl+c for pasting elsewhere. This copied data is stored in clipboard and is accessible from the net by a combination of Javascripts and ASP.
Just try this:
1) Copy any text by 'ctrl+c'
2) Click the Link: http://www.sourcecodesworld.com/special/clipboard.asp
You will see the text you copied on the Screen which was accessed by this web page. (Check it out !!)
Do not keep sensitive data (like passwords, creditcard numbers, PIN etc.) in the clipboard while surfing the web. It is extremely easy to extract the text stored in the clipboard to steal your sensitive information.
Be cautious...
To avoid Clipboard Hack Problem, do the following:
1) In Internet Explorer, Go to Tools -> Internet options -> Security
2) Press Custom level.
3) In the security settings, select disable under Allow paste operations via script and click on 'OK. (Now the contents of your clipboard are safe.) protect yourself.

Some common ftp error codes and its meaning.

noreply@blogger.com (kashif) — Fri, 22 Jan 2010 17:42:00 +0000

110 : Restart marker reply. In this case, the text is exact and not left to the particular implementation; it must read: MARK yyyy = mmmm where yyyy is User-process data stream marker, and mmmm server's equivalent marker (note the spaces between markers and "=").
120 : Service ready in nnn minutes.
125: Data connection already open; transfer starting.
150: File status okay; about to open data connection.
200: Command okay.
202: Command not implemented, superfluous at this site.
211: System status, or system help reply.
212 irectory status.
213 : File status.
214 : Help message.On how to use the server or the meaning of a particular non-standard command. This reply is useful only to the human user.
215 : NAME system type. Where NAME is an official system name from the list in the Assigned Numbers document.
220 : Service ready for new user.
221 : Service closing control connection.
225 : Data connection open; no transfer in progress.

226 : Closing data connection. Requested file action successful (for example, file transfer or file abort).
227 : Entering Passive Mode (h1,h2,h3,h4,p1,p2).
230 : User logged in, proceed. Logged out if appropriate.
250 : Requested file action okay, completed.
257 : "PATHNAME" created.
331 : User name okay, need password.
332 : Need account for login.
350 : Requested file action pending further information
421 : Service not available, closing control connection.This may be a reply to any command if the service knows it must shut down.
425 : Can't open data connection.
426 : Connection closed; transfer aborted.
450 : Requested file action not taken.
451 : Requested action aborted. Local error in processing.
452 : Requested action not taken. Insufficient storage space in system.File unavailable (e.g., file busy).
500 : Syntax error, command unrecognized. This may include errors such as command line too long.
501 : Syntax error in parameters or arguments.
502 : Command not implemented.
503 : Bad sequence of commands.
504 : Command not implemented for that parameter.
530 : Not logged in.
532 : Need account for storing files.
550 : Requested action not taken. File unavailable (e.g., file not found, no access).
551 : Requested action aborted. Page type unknown.
552 : Requested file action aborted. Exceeded storage allocation (for current directory or dataset).
553 : Requested action not taken. File name not allowed.

How to prevent blue screen of death, blue screen problem, BSOD

noreply@blogger.com (kashif) — Mon, 04 Jan 2010 11:12:00 +0000

Have you ever encountered that your computer is freezing up even sometimes falls into blue screen? This must be the last thing of computer problems for all the users to see. As a matter of fact, the best methods to fix blue screen problem is to prevent it in advance rather than figure it out when it happens.
This is what I want to share with you in this article-how to prevent blue screen problems in advance. Here are some tips to do that based on my own experience.
1. You should back up importance registry files manually at proper intervals. In this way, computer will not be in a mess if system goes wrong but there are not alternative backup files at hand.

2. You should avoid closing down computer abnormally in order to lessen the number of lost files, such as Dynamic Library Links files which is quite important for smooth computer running.
3. For common users, if computer is running normally, it is unnecessary to upgrade graphic card and BIOS and driver programs of main board. You may not know that too much upgrading can harm system performance as well.
4. You should check and optimize system files regularly. You can click "Start" - "All Programs" - "Accessories" -"Command Prompt" and then type "sfc" so as to check lost files and proofread versions.
5. And you had better not install useless software as possible as you can. If you are not skillful enough, you should not uninstall or delete programs manually so as to reduce the number of illegal alternative files.
6. To be honestly, if you do not have large RAM and administrative programs, it is safe for you not to run large programs at the same time. What is more, if you find system is creaking when listening to MP3, the problems are caused likely by low memory.

Dangerous file extension which could infect your pc.

noreply@blogger.com (kashif) — Mon, 04 Jan 2010 09:18:00 +0000

Files arrive on computers several different ways. Some are loaded as part of a software installation; others are transferred onto the computer over a network or from a removable storage device; other files are downloaded from the Internet (with or without the user's knowledge); and other files arrive as email attachments. When a file arrives on your computer, how it arrived provides you with a clue as to its safety.
For example, if you transferred some work documents from your desktop to your laptop via a USB stick, you can be reasonably assured that the files are not dangerous. Likewise, if you transfer photo files from your digital camera to your hard drive, those files are most likely safe. On the other hand, if an email with an attachment arrives from a stranger, the file's safety should be immediately questioned. In fact, if an unsolicited file comes from a stranger, it's most likely some form of malware and should be removed, preferably by your antivirus program. If you must manually delete it, delete the entire email message, making sure not to open the attachment.

Your next clue as to a file's potential for danger is its file extension. Certain file extensions are more notorious than others, especially executable file extensions such as.exe,.bat, or.com. When an executable file is clicked, an application runs. This application could be either innocent or dangerous. Again, consider the source before taking any action. Did an.exe file arrive from a trusted source? For instance, is it a software setup file that you downloaded from a site such as Microsoft.com? If so, then it's likely safe. If the.exe file randomly arrived, it may be dangerous.
If you notice a file with the.com file extension, be especially careful. Not only is the.com file extension an executable, MS-DOS application file, it is also deceptive thanks to the use of ".com" in URLs. You may think that a file with the.com file extension is a link to a Web site, but it's not, so use extreme care before clicking.
Another sign that a file might be dangerous is when the file has a double file extension such as filename.gif.exe. These file extensions are named with double extensions to trick users into thinking that they are safe. For example, if your computer isn't set to display file extensions, the file with the double extension will look legitimate. In our example, filename.gif.exe would appear as filename.gif. In general,.gif files are safe to open, so a savvy computer user wouldn't see the dangerous.exe extension and have a false sense of security when seeing the relatively safe.gif extension.
Because a file's extension does provide you with clues, it's smart to set up your computer to display file extensions. This is done in the Control Panel's Folder Options. In Windows 7 and Windows Vista, go to Start and type Folder Options into the Search bar and then click on the Folder Options link once it appears. Next, click on the View tab and then remove the checkmark next to "Hide extensions for known file types."
A final consideration when opening newly arrived files is whether you are expecting the file or not, regardless of its file extension or who sent it. For example, it's not uncommon for malware to overtake a computer's email system and send viruses on behalf of the computer's owner. While you may trust your family members and coworkers not to send you infected files, you can't always be sure that your contacts' computers haven't been commandeered by malware. If your boss lets you know that he'll be sending you a report and then an email arrives with a file named "salesreport.exe," then it's likely safe to open because you are expecting it. On the other hand, if out of the blue an unexpected email arrives from your boss with an attachment named "funnymovie.com," you'd be wise to ask your boss what the file is for before opening it.
Dangerous files will arrive on your computer. Whether your computer gets infected or not often starts with you making smart decisions on how to handle these files.

Detect hacker attack in your machine.

noreply@blogger.com (kashif) — Wed, 30 Dec 2009 06:03:00 +0000

Most computer vulnerabilities can be exploited in a variety of ways. Hacker attacks may use a single specific exploit, several exploits at the same time, a misconfiguration in one of the system components or even a backdoor from an earlier attack. Due to this, detecting hacker attacks is not an easy task, especially for an inexperienced user. This article gives a few basic guidelines to help you figure out either if your machine is under attack or if the security of your system has been compromised. Keep in mind just like with viruses, there is no 100% guarantee you will detect a hacker attack this way. However, there's a good chance that if your system has been hacked, it will display one or more of the following behaviours.

Windows machines:
Suspiciously high outgoing network traffic. If you are on a dial-up account or using ADSL and notice an unusually high volume of outgoing network (traffic especially when you computer is idle or not necessarily uploading data), then it is possible that your computer has been compromised. Your computer may be being used either to send spam or by a network worm which is replicating and sending copies of itself. For cable connections, this is less relevant - it is quite common to have the same amount of outgoing traffic as incoming traffic even if you are doing nothing more than browsing sites or downloading data from the Internet.
Increased disk activity or suspicious looking files in the root directories of any drives. After hacking into a system, many hackers run a massive scan for any interesting documents or files containing passwords or logins for bank or epayment accounts such as PayPal. Similarly, some worms search the disk for files containing email addresses to use for propagation. If you notice major disk activity even when the system is idle in conjunction with suspiciously named files in common folders, this may be an indication of a system hack or malware infection.
Large number of packets which come from a single address being stopped by a personal firewall. After locating a target (eg. a company's IP range or a pool of home cable users) hackers usually run automated probing tools which try to use various exploits to break into the system. If you run a personal firewall (a fundamental element in protecting against hacker attacks) and notice an unusually high number of stopped packets coming from the same address then this is a good indication that your machine is under attack. The good news is that if your personal firewall is reporting these attacks, you are probably safe. However, depending on how many services you expose to the Internet, the personal firewall may fail to protect you against an attack directed at a specific FTP service running on your system which has been made accessible to all. In this case, the solution is to block the offending IP temporarily until the connection attempts stop. Many personal firewalls and IDSs have such a feature built in.
Your resident antivirus suddenly starts reporting that backdoors or trojans have been detected, even if you have not done anything out of the ordinary. Although hacker attacks can be complex and innovative, many rely on known trojans or backdoors to gain full access to a compromised system. If the resident component of your antivirus is detecting and reporting such malware, this may be an indication that your system can be accessed from outside.
Unix machines:
Suspiciously named files in the /tmp folder. Many exploits in the Unix world rely on creating temporary files in the /tmp standard folder which are not always deleted after the system hack. The same is true for some worms known to infect Unix systems; they recompile themselves in the /tmp folder and use it as 'home'.
Modified system binaries such as 'login', 'telnet', 'ftp', 'finger' or more complex daemons, 'sshd', 'ftpd' and the like. After breaking into a system, a hacker usually attempts to secure access by planting a backdoor in one of the daemons with direct access from the Internet, or by modifying standard system utilities which are used to connect to other systems. The modified binaries are usually part of a rootkit and generally, are 'stealthed' against direct simple inspection. In all cases, it is a good idea to maintain a database of checksums for every system utility and periodically verify them with the system offline, in single user mode.
Modified /etc/passwd, /etc/shadow, or other system files in the /etc folder. Sometimes hacker attacks may add a new user in /etc/passwd which can be remotely logged in a later date. Look for any suspicious usernames in the password file and monitor all additions, especially on a multi-user system.
Suspicious services added to /etc/services. Opening a backdoor in a Unix system is sometimes a matter of adding two text lines. This is accomplished by modifying /etc/services as well as /etc/ined.conf. Closely monitor these two files for any additions which may indicate a backdoor bound to an unused or suspicious port.

List of MS-DOS Commands.useful for hackers and ethical hackers.

noreply@blogger.com (kashif) — Tue, 22 Dec 2009 18:05:00 +0000

There's no replacement for the *nix shell for network based computing tasks, but Microsoft still has its roots deep. For those who find working via the GUI meclancholy, here's a list of DOS commands you might want to try out on your Windows machine. This can be useful for hackers, or anyone interested in churning out more information from the network.
ADDUSERS Helps Add or list users to/from a CSV file
ARP Address Resolution Protocol
ASSOC Change file extension associations
ASSOCIAT One step file association
AT Schedule a command to run at a later time
ATTRIB Change file attributesBOOTCFG Edit Windows boot settings
BROWSTAT Get domain, browser and PDC info CACLS Change file permissions
CALL Call one batch program from another
CD Change Directory - move to a specific Folder
CHANGE Change Terminal Server Session properties
CHKDSK Check Disk - check and repair disk problems
CHKNTFS Check the NTFS file system
CHOICE Accept keyboard input to a batch file
CIPHER Encrypt or Decrypt files/folders *
CleanMgr Automated cleanup of Temp files, recycle bin
CLEARMEM Clear memory leaks
CLIP Copy STDIN to the Windows clipboard.
CLS Clear the screen
CLUSTER Windows Clustering
CMD Start a new CMD shell
COLOR Change colors of the CMD window
COMP Compare the contents of two files or sets of files
COMPACT Compress files or folders on an NTFS partition
COMPRESS Compress individual files on an NTFS partition
CON2PRT Connect or disconnect a Printer
CONVERT Convert a FAT drive to NTFS.
COPY Copy one or more files to another location
CSVDE Import or Export Active Directory data DATE Display or set the date
Dcomcnfg DCOM Configuration Utility
DEFRAG Defragment hard drive
DEL Delete one or more files
DELPROF Delete NT user profiles
DELTREE Delete a folder and all subfolders
DevCon Device Manager Command Line Utility
DIR Display a list of files and folders
DIRUSE Display disk usage
DISKCOMP Compare the contents of two floppy disks
DISKCOPY Copy the contents of one floppy disk to another
DNSSTAT DNS Statistics
DOSKEY Edit command line, recall commands, and create macros
DSADD Add user (computer, group..) to active directory
DSQUERY List items in active directory
DSMOD Modify user (computer, group..) in active directory ECHO Display message on screen
ENDLOCAL End localisation of environment changes in a batch file
ERASE Delete one or more files
EXIT Quit the CMD shell
EXPAND Uncompress files
EXTRACT Uncompress CAB filesFC Compare two files
FDISK Disk Format and partition
FIND Search for a text string in a file
FINDSTR Search for strings in files
FOR Loop command: all options Files, Directory, List
FORFILES Batch process multiple files
FORMAT Format a disk

FREEDISK Check free disk space (in bytes)
FSUTIL File and Volume utilities
FTP File Transfer Protocol
FTYPE Display or modify file types used in file extension associations GLOBAL Display membership of global groups
GOTO Direct a batch program to jump to a labelled line HELP Online Help
HFNETCHK Network Security Hotfix Checker IF Conditionally perform a command
IFMEMBER Is the current user in an NT Workgroup
IPCONFIG Configure IP KILL Remove a program from memoryLABEL Edit a disk label
LOCAL Display membership of local groups
LOGEVENT Write text to the NT event viewer.
LOGOFF Log a user off
LOGTIME Log the date and time in a file MEM Display memory usage
MD Create new folders
MODE Configure a system device
MORE Display output, one screen at a time
MOUNTVOL Manage a volume mount point
MOVE Move files from one folder to another
MOVEUSER Move a user from one domain to another
MSG Send a message
MSIEXEC Microsoft Windows Installer
MSINFO Windows NT diagnostics
MSTSC Terminal Server Connection (Remote Desktop Protocol)
MUNGE Find and Replace text within file(s)
MV Copy in-use files NET Manage network resources
NETDOM Domain Manager
NETSH Configure network protocols
NETSVC Command-line Service Controller
NBTSTAT Display networking statistics (NetBIOS over TCP/IP)
NETSTAT Display networking statistics (TCP/IP)
NOW Display the current Date and Time
NSLOOKUP Name server lookup
NTBACKUP Backup folders to tape
NTRIGHTS Edit user account rights PATH Display or set a search path for executable files
PATHPING Trace route plus network latency and packet loss
PAUSE Suspend processing of a batch file and display a message
PERMS Show permissions for a user
PERFMON Performance Monitor
PING Test a network connection
POPD Restore the previous value of the current directory saved by PUSHD
PORTQRY Display the status of ports and services
PRINT Print a text file
PRNCNFG Display, configure or rename a printer
PRNMNGR Add, delete, list printers set the default printer
PROMPT Change the command prompt
PsExec Execute process remotely
PsFile Show files opened remotely
PsGetSid Display the SID of a computer or a user
PsInfo List information about a system
PsKill Kill processes by name or process ID
PsList List detailed information about processes
PsLoggedOn Who's logged on (locally or via resource sharing)
PsLogList Event log records
PsPasswd Change account password
PsService View and control services
PsShutdown Shutdown or reboot a computer
PsSuspend Suspend processes
PUSHD Save and then change the current directory QGREP Search file(s) for lines that match a given pattern. RASDIAL Manage RAS connections
RASPHONE Manage RAS connections
RECOVER Recover a damaged file from a defective disk.
REG Read, Set or Delete registry keys and values
REGEDIT Import or export registry settings
REGSVR32 Register or unregister a DLL
REGINI Change Registry Permissions
REM Record comments (remarks) in a batch file
REN Rename a file or files.
REPLACE Replace or update one file with another
RD Delete folder(s)
RDISK Create a Recovery Disk
RMTSHARE Share a folder or a printer
ROBOCOPY Robust File and Folder Copy
ROUTE Manipulate network routing tables
RUNAS Execute a program under a different user account
RUNDLL32 Run a DLL command (add/remove print connections)SC Service Control
SCHTASKS Create or Edit Scheduled Tasks
SCLIST Display NT Services
ScriptIt Control GUI applications
SET Display, set, or remove environment variables
SETLOCAL Control the visibility of environment variables
SETX Set environment variables permanently
SHARE List or edit a file share or print share
SHIFT Shift the position of replaceable parameters in a batch file
SHORTCUT Create a windows shortcut (.LNK file)
SHOWGRPS List the NT Workgroups a user has joined
SHOWMBRS List the Users who are members of a Workgroup
SHUTDOWN Shutdown the computer
SLEEP Wait for x seconds
SOON Schedule a command to run in the near future
SORT Sort input
START Start a separate window to run a specified program or command
SU Switch User
SUBINACL Edit file and folder Permissions, Ownership and Domain
SUBST Associate a path with a drive letter
SYSTEMINFO List system configuration TASKLIST List running applications and services
TIME Display or set the system time
TIMEOUT Delay processing of a batch file
TITLE Set the window title for a CMD.EXE session
TOUCH Change file timestamps
TRACERT Trace route to a remote host
TREE Graphical display of folder structure
TYPE Display the contents of a text file USRSTAT List domain usernames and last login VER Display version information
VERIFY Verify that files have been saved
VOL Display a disk label WHERE Locate and display files in a directory tree
WHOAMI Output the current UserName and domain
WINDIFF Compare the contents of two files or sets of files
WINMSD Windows system diagnostics
WINMSDP Windows system diagnostics II
WMIC WMI Commands XCACLS Change file permissions
XCOPY Copy files and folders This list is not exhaustive. Most commands will work well, however please don't fume up as some of these might not work on your machine due to version dependencies

Do your cellphone being monitored by somebody. Check em out.

noreply@blogger.com (kashif) — Thu, 03 Dec 2009 18:04:00 +0000

It connects you to the world, but your cell phone could also be giving anyone from your boss to your wife a window into your every move. The same technology that lets you stay in touch on-the-go can now let others tap into your private world - without you ever even suspecting something is awry.
The new generation
Long gone are the days of simple wiretapping, when the worst your phone could do was let someone listen in to your conversations. The new generation of cell phone spyingtools provides a lot more power.
Eavesdropping is easy. All it takes is a two-minute software install and someone can record your calls and monitor your text messages. They can even set up systems to be automatically alerted when you dial a certain number, then instantly patched into your conversation. Anyone who can perform a basic internet search can find the tools and figure out how to do it in no time.
But the scarier stuff is what your phone can do when you aren't even using it. Let's start with your location.
Simple surveillance
You don't have to plant a CIA-style bug to conduct surveillance any more. A service called World Tracker lets you use data from cell phone towers and GPS systems to pinpoint anyone's exact whereabouts, any time - as long as they've got their phone on them.
All you have to do is log on to the web site and enter the target phone number. The site sends a single text message to the phone that requires one response for confirmation. Once the response is sent, you are locked in to their location and can track them step-by-step. The response is only required the first time the phone is contacted, so you can imagine how easily it could be handled without the phone's owner even knowing.
Once connected, the service shows you the exact location of the phone by the minute, conveniently pinpointed on a Google Map. So far, the service is only available in the UK, but the company has indicated plans to expand its service to other countries soon.
Advanced eavesdropping
So you've figured out where someone is, but now you want to know what they're actually doing. Turns out you can listen in, even if they aren't talking on their phone.
Dozens of programs are available that'll turn any cell phone into a high-tech, long-range listening device. And the scariest part? They run virtually undetectableto the average eye.
Take, for example, Flexispy. The service promises to let you "catch cheating wives or cheating husbands" and even "bug meeting rooms." Its tools use a phone's microphone to let you hear essentially any conversations within earshot. Once the program is installed, all you have to do is dial a number to tap into the phone's mic and hear everything going on. The phone won't even ring, and its owner will have no idea you are virtually there at his side.
Recover deleted text messages (SMS) and last dialed numbers from any SIM cards and smart cards
Did you know that with the help of a simple, inexpensive device, anyone with access to your phone could read your private text messages (SMS), even if you have deleted them previously? This device can even recover contacts and a good number or previously dialed numbers.

Legal loopholes
You might be asking how this could possibly be legal. Turns out, it isn't - at least, not in the ways we just described. Much like those fancy smoking devices designed "for tobacco use only," the software itself gets by because of a disclaimer saying it doesn't endorse any illegal use.
I did a little digging with our friends from Flexispy. You won't find it on the flashy front page, but buried a bit further in the site, the company says you're fine to use their program only "on a phone that you own, for protecting your children," or for purposes like "archiving data." It's a bit of a contrast from the bold suggestions of "uncover[ing] employee espionage," "catch[ing] cheating husbands," and "bug [ging] meeting rooms" that fill the company's materials. After a little more explanation, their answer as to the legality of the service ends with a broad statement: "Please consult a qualified lawyer in your country for the correct answer to this question."
Let me make it easier for you: Once you get into listening in to private conversations without either party's consent, you're treading rough water that could sweep you straight into jail. Whether it's an employee or a spouse on the receiving end of your mission, neither federal nor state privacy laws take violations lightly in America. Getting caught could cost you several years behind bars, among other serious penalties.
Detecting and protecting
Finding spyware on your phone isn't easy. There are dozens of bug detectors available from surveillance companies, but the only true fix is taking your phone to your provider and having them wipe it out altogether. That will restore the factory settings and clear out any hidden software that's running on your phone.
Security experts say there may be some subtle signs your phone is invaded:
You seem to have trouble shutting it off, or it stays lit up after you've powered down.
The phone sometimes lights up when you aren't making or receiving a call, or using any other function.
You regularly hear odd background noises or clicks when you're on the phone.
Unfortunately, there isn't much you can do to safeguard your cell just yet. I'm sure it's only a matter of time until we see McAfee-style programs to firewall your phone and keep intruders out. For now, though, the only sure-fire form of protection is to keep a close guard on your phone. Don't accept Bluetooth connections unless you know what they are. Most important, make sure no one has access to install something when you aren't watching. Otherwise, they may soon be watching you when you least expect it.

Some Useful windows 7 apps and services

noreply@blogger.com (kashif) — Thu, 19 Nov 2009 06:19:00 +0000

1.Troubleshoot problems
If some part of Windows 7 is behaving strangely, and you don't know why, then click Control Panel > Find and fix problems (or 'Troubleshooting') to access the new troubleshooting packs. These are simple wizards that will resolve common problems, check your settings, clean up your system and more.
2. Startup repair
If you've downloaded Windows 7 (and even if you haven't) it's a good idea to create a system repair disc straight away in case you run into problems booting the OS later on. Click Start > Maintenance > Create a System Repair Disc, and let Windows 7 build a bootable emergency disc. If the worst does happen then it could be the only way to get your PC running again.
3.Take control
Tired of the kids installing dubious software or running applications you'd rather they left alone? AppLocker is a new Windows 7 feature that ensures users can only run the programs you specify. Don't worry, that's easier to set up than it sounds: you can create a rule to allow everything signed by a particular publisher, so choose Microsoft, say, and that one rule will let you run all signed Microsoft applications. Launch GPEDIT.MSC and go to Computer Configuration > Windows Settings > Security Settings > Application Control Policies > AppLocker to get a feel for how this works.
4.Understanding System Restore
Using System Restore in previous versions of Windows has been something of a gamble. There's no way of telling which applications or drivers it might affect - you just have to try it and see.
Windows 7 is different. Right-click Computer, select Properties > System Protection > System Restore > Next, and choose the restore point you'd like to use. Click the new button to 'Scan for affected programs' and Windows will tell you which (if any) programs and drivers will be deleted or recovered by selecting this restore point.
5.Set the time zone
System administrators will appreciate the new command line tzutil.exe utility, which lets you set a PC's time zone from scripts. If you wanted to set a PC to Greenwich Mean Time, for instance, you'd use the command
tzutil /s "gmt standard time"
The command "tzutil /g" displays the current time zone, "tzutil /l" lists all possible time zones, and "tzutil /?" displays details on how the command works.
6.Activate XP mode
If you've old but important software that no longer runs under Windows 7, then you could try using XP Mode, a virtual copy of XP that runs in a window on your Windows 7 desktop. But there's a big potential problem, as XP Mode only works with systems that have hardware virtualisation (AMD-V or Intel VT) built-in and turned on. If you've a compatible CPU then this may just be a matter of enabling the option in your BIOS set-up program, however some high profile brands, including Sony Vaio, disable the setting for "security reasons". And that blocks XP Mode from working, too.
One solution has emerged, but it's a little risky, as essentially you'll have to alter a byte in your laptop firmware and hope this doesn't have any unexpected side-effects. Gulp. If you're feeling brave then take a look at the Feature Enable Blog for the details, but don't blame us if it goes wrong.
A safer approach might be to use VirtualBox, a virtualisation tool that doesn't insist on hardware support, but then you will need to find a licensed copy of XP (or whatever other Windows version your software requires) for its virtual machine.
7.Right-click everything
At first glance Windows 7 bears a striking resemblance to Vista, but there's an easy way to begin spotting the differences - just right-click things.
Right-click an empty part of the desktop, for instance, and you'll find a menu entry to set your screen resolution. No need to go browsing through the display settings any more.
Right-click the Explorer icon on the taskbar for speedy access to common system folders: Documents, Pictures, the Windows folder, and more.
And if you don't plan on using Internet Explorer then you probably won't want its icon permanently displayed on the taskbar. Right-click the icon, select 'Unpin this program from the taskbar', then go install Firefox, instead.

8. Desktop slideshow
Windows 7 comes with some very attractive new wallpapers, and it's not always easy to decide which one you like the best. So why not let choose a few, and let Windows display them all in a desktop slideshow? Right-click an empty part of the desktop, select Personalise > Desktop Background, then hold down Ctrl as you click on the images you like. Choose how often you'd like the images to be changed (anything from daily to once every 10 seconds), select Shuffle if you'd like the backgrounds to appear in a random order, then click Save Changes and enjoy the show.
9.Customise the log-on screen
Changing the Windows log-on screen used to involve some complicated and potentially dangerous hacks, but not any more - Windows 7 makes it easy.
First, browse to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\Background in REGEDIT, double-click the DWORD key called OEMBackground (not there? Create it) and set its value to 1.
Now find a background image you'd like to use. Make sure it's less than 256KB in size, and matches the aspect ratio of your screen as it'll be stretched to fit.
Next, copy that image into the %windir%\system32\oobe\info\backgrounds folder (create the info\backgrounds folders if they don't exist). Rename the image to backgroundDefault.jpg, reboot, and you should now have a custom log-on image.
Alternatively, use a free tweaking tool to handle everything for you. Logon Changer displays a preview so you can see how the log-on screen will look without rebooting, while the Logon Screen Rotator accepts multiple images and will display a different one every time you log on.
10.Remove taskbar buttons
One problem with the previous tip is the buttons will gobble up valuable taskbar real estate, but you can reduce the impact of this by removing their text captions. Launch REGEDIT, browse to HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics, add a string called MinWidth, set it to 54, and reboot to see the results.
11.Restore the Quick Launch Toolbar
If you're unhappy with the new taskbar, even after shrinking it, then it only takes a moment to restore the old Quick Launch Toolbar.
Right-click the taskbar, choose Toolbars > New Toolbar, type "%UserProfile%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch" (less the quotes) into the Folder box and click Select Folder.
Now right-click the taskbar, clear 'Lock the taskbar', and you should see the Quick Launch toolbar, probably to the right. Right-click its divider, clear Show Text and Show Title to minimise the space it takes up. Complete the job by right-clicking the bar and selecting View > Small Icons for the true retro look.
12.Disable smart window arrangement
Windows 7 features interesting new ways to intelligently arrange your windows, so that (for example) if you drag a window to the top of the screen then it will maximise. We like the new system, but if you find it distracting then it's easily disabled. Run REGEDIT, go to HKEY_CURRENT_USER\Control Panel\Desktop, set WindowArrangementActive to 0, reboot, and your windows will behave just as they always did.
13.Display your drives
Click Computer in Windows 7 and you might see a strange lack of drives, but don't panic, it's just Microsoft trying to be helpful: drives like memory card readers are no longer displayed if they're empty. We think it's an improvement, but if you disagree then it's easy to get your empty drives back. Launch Explorer, click Tools > Folder Options > View and clear 'Hide empty drives in the computer folder'.
14.Hiding the Windows Live Messenger icon
If you use Windows Live Messenger a lot, you'll have noticed that the icon now resides on the taskbar, where you can easily change status and quickly send an IM to someone. If you prefer to keep Windows Live Messenger in the system tray, where it's been for previous releases, just close Windows Live Messenger, edit the shortcut properties and set the application to run in Windows Vista compatibility mode.
15.Open folder in new process
By default Windows 7 opens folders in the same process. This saves system resources, but means one folder crash can bring down the entire shell. If your system seems unstable, or you're doing something in Explorer that regularly seems to causes crashes, then open Computer, hold down Shift, right-click on your drive and select Open in New Process. The folder will now be launched in a separate process, and so a crash is less likely to affect anything else.
16.Watch more videos
Windows Media Player 12 is a powerful program, but it still won't play all the audio and video files you'll find online. Fortunately the first freeware Windows 7 codecs package [shark007.net/win7codecs.html] has been released, and installing it could get your troublesome multimedia files playing again.
17.Restore your gadgets
Windows 7 has tightened up its security by refusing to run gadgets if UAC has been turned off, so limiting the damage malicious unsigned gadgets can do to your system. If you've disabled UAC, miss your gadgets and are happy to accept the security risk, though, there's an easy Registry way to get everything back to normal. Run REGEDIT, go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Sidebar\Settings, create a new DWORD value called AllowElevatedProcess and set it to 1. Your gadgets should start working again right away.
18.Minimise quickly with shake
If you have multiple windows open on your desktop and things are getting too cluttered, it used to be a time-consuming process to close them all down. In Windows 7 you can use the Aero Shake feature to minimise everything in seconds, using a cool mouse gesture. Grab the title bar of the window you wish to keep open and give it a shake, and rejoice in a clear desktop area.
19.Customise System Restore
There was very little you could do to configure System Restore in Vista, but Windows 7 improves the situation with a couple of useful setup options.
Click the Start orb, right-click Computer and select Properties > System Protection > Configure, and set the Max Usage value to a size that suits your needs (larger to hold more restore points, smaller to save disk space).
And if you don't need System Restore to save Windows settings then choose the "Only restore previous versions of files" option. Windows 7 won't back up your Registry, which means you'll squeeze more restore points and file backups into the available disk space. System Restore is much less likely to get an unbootable PC working again, though, so use this trick at your own risk.
20.Run As
Hold down Shift, right-click any program shortcut, and you'll see an option to run the program as a different user, handy if you're logged in to the kids' limited account and need to run something with higher privileges. This isn't really a new feature - Windows XP had a Run As option that did the same thing - but Microsoft stripped it out of Vista, so it's good to see it's had a change of heart.
21.Search privacy
By default Windows 7 will remember your PC search queries, and display the most recent examples when searching in Windows Explorer. If you're sharing a PC and don't want everyone to see your searches, then launch GPEDIT.MSC, go to User Configuration > Administrative Templates > Windows Components > Windows Explorer, double-click "Turn off display of recent search entries..." and click Enabled > OK.
22.Rearrange the system tray
With Windows 7 we finally see system tray icons behave in a similar way to everything else on the taskbar. So if you want to rearrange them, then go right ahead, just drag and drop them into the order you like. You can even move important icons outside of the tray, drop them onto the desktop, then put them back when you no longer need to keep an eye on them.
23.Extend your battery life
Windows 7 includes new power options that will help to improve your notebook's battery life. To see them, click Start, type Power Options and click the Power Options link, then click Change Plan Settings for your current plan and select Change Advanced Settings. Expand Multimedia Settings, for instance, and you'll see a new "playing video" setting that can be set to optimise power savings rather than performance. Browse through the other settings and ensure they're set up to suit your needs.
24.Write crash dump files
Windows 7 won't create memory.dmp crash files if you've less than 25GB of free hard drive space, annoying if you've installed the Windows debugging tools and want to diagnose your crashes. You can turn this feature off, though: browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl, create a new DWORD value called AlwaysKeepMemoryDump, set it to 1, and the crash dump file will now always be saved.
25.Find bottlenecks
From what we've seen so far Windows 7 is already performing better than Vista, but if your PC seems sluggish then it's now much easier to uncover the bottleneck. Click Start, type RESMON and press Enter to launch the Resource Monitor, then click the CPU, Memory, Disk or Network tabs. Windows 7 will immediately show which processes are hogging the most system resources.
The CPU view is particularly useful, and provides something like a more powerful version of Task Manager. If a program has locked up, for example, then right-click its name in the list and select Analyze Process. Windows will then try to tell you why it's hanging - the program might be waiting for another process, perhaps - which could give you the information you need to fix the problem.
26.Faster program launches
If you've launched one instance of a program but want to start another, then don't work your way back through the Start menu. It's much quicker to just hold down Shift and click on the program's icon (or middle-click it), and Windows 7 will start a new instance for you.
27.Load IE faster
Some Internet Explorer add-ons can take a while to start, dragging down the browser's performance, but at least IE8 can now point a finger at the worst resource hogs. Click Tools > Manage Add-ons, check the Load Time in the right-hand column, and you'll immediately see which browser extensions are slowing you down.
28.An Alt+Tab alternative
You want to access one of the five Explorer windows you have open, but there are so many other programs running that Alt+Tab makes it hard to pick out what you need. The solution? Hold down the Ctrl key while you click on the Explorer icon. Windows 7 will then cycle through the Explorer windows only, a much quicker way to locate the right one. And of course this works with any application that has multiple windows open.
29.Block annoying alerts
Just like Vista, Windows 7 will display a suitably stern warning if it thinks your antivirus, firewall or other security settings are incorrect.
But unlike Vista, if you disagree then you can now turn off alerts on individual topics. If you no longer want to see warnings just because you've dared to turn off the Windows firewall, say, then click Control Panel > System and Security > Action Centre > Change Action Centre settings, clear the Network Firewall box and click OK.
30.Parallel defrags
The standard Windows 7 defragger offers a little more control than we saw in Vista, and the command line version also has some interesting new features. The /r switch will defrag multiple drives in parallel, for instance (they'll obviously need to be physically separate drives for this to be useful). The /h switch runs the defrag at a higher than normal priority, and the /u switch provides regular progress reports so you can see exactly what's going on. Enter the command
defrag /c /h /u /r
in a command window to speedily defrag a system with multiple drives, or enter defrag /? to view the new options for yourself.
31.Fix Explorer
The Windows 7 Explorer has a couple of potential annoyances. Launching Computer will no longer display system folders like Control Panel or Recycle Bin, for instance. And if you're drilling down through a complicated folder structure in the right-hand pane of Explorer, the left-hand tree won't always expand to follow what you're doing, which can make it more difficult to see exactly where you are. Fortunately there's a quick fix: click Organize > Folder and Search Options, check "Show all folders" and "Automatically expand to current folder", and click OK.
32.Disable hibernation
By default Windows 7 will permanently consume a chunk of your hard drive with its hibernation file, but if you never use sleep, and always turn your PC off, then this will never actually be used. To disable hibernation and recover a little hard drive space, launch REGEDIT, browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power, then set both HibernateEnabled and HiberFileSizePerfect to zero.
If you know anything more about win7 then please comment.

Useful and unknown windows 7 keyboard shortcut

noreply@blogger.com (kashif) — Thu, 19 Nov 2009 05:46:00 +0000

Here is a list of some useful and unknown Keyboard Shortcuts for Windows 7
Key strokes used from Desktop
1. Windows Key + Tab = Aero (Switch windows using tab key)

2. Windows Key + F = Search (to search or find)

3. Windows Key + R = Run (to use Run box)

4. Windows Key + E = Explorer (Launches Explorer)

5. Windows Key + L = Lock (Locks the Computer)

6. Windows Key + X = Mobility Center

7. Windows Key + P = Projector

8. Windows Key + S = Launches the OneNote Screen Clipping Tool (yes it requires Office One Note)

9. Windows Key + D = Show and Hide Desktop

10. Windows Key + T = Cycle Super Taskbar Items

11. Windows Key + M = Minimize All Windows

12. Windows Key + Up = Maximize the opened Window

13. Windows Key + Down = Minimize the opened Window

14. Windows Key + Left = Tile Current Window to the Left

15. Windows Key + Right = Tile Current Windows to the Right

16. Windows Key + = = Magnifier

17. Windows Key + # = Quicklaunch

18. Ctrl + Alt + E = My Computer

19. Windows Key + 1 = Launches first application on taskbar (2 launches second, 3 launches third and so on)

Key strokes used from Explorer
1. Alt + Up = Go up one level

2. Alt + Left = Back

3. Alt + Right = Forward

How to Install windows xp on SATA hdd drive

noreply@blogger.com (kashif) — Thu, 12 Nov 2009 07:59:00 +0000

One of the most popular topics among us is installing Windows XP on your new Windows Vista computer – sometimes for compatibility reasons, but also because a lot of people just don’t like Vista very much.
The problem that people keep running into left and right is getting to the point where XP starts to install and getting the message “Setup did not find any hard disk drives installed in your computer”. This error happens because your new computer has a storage controller that isn’t supported natively in XP, usually an SATA (Serial ATA) controller.
If you don’t have a floppy drive in your computer (who does anymore), then you’ll need to use a process called slip-streaming to integrate the storage drivers into your XP installation CD.
It should go without saying that this is an advanced topic, so proceed with caution.
Creating a Custom XP Install
We’ll use a software called Nlite to create a new XP install cd, so you’ll first need to download and install it. Once it starts up, you’ll be prompted for your Windows installation, so you’ll want to click the Browse button.
First you’ll be prompted for the “Windows installation”, which really means your XP install CD. Find it and select the root of the installation, and then click OK to go to the next dialog.
Next you’ll be prompted on where you want to save the temporary files used during the slip-streaming process. I chose to create a new directory and called it XPISO, but you can put it wherever you’d like. I just recommend to use a new directory.
nLite will copy all the necessary files off the XP installation and into the temporary folder. When it’s done, you’ll see all the information on which version it is.
Hit the next button until you come to this screen, where you can select what options you want. Select “Drivers” and then “Bootable ISO”.
Side note: You can select any of the other options if you’d like. nLite will let you bundle updates, set tweaks or automatically remove components from the installation, but that all goes beyond the scope of this article.
Hit the next button until you get to the screen for selecting drivers. If you click the Insert button, you can choose between adding a single driver or adding a folder of drivers. Since we’ll just be loading a single driver, you can choose that option.
Browse to the directory where you extracted the driver files, and then select Open. Note that it doesn’t really matter which of the *.inf files you choose, because it will select all files in the folder anyway.
nLite will prompt you to select your driver. If you don’t know which exact one it is, you can either use Device Manager in Vista to find the exact model, or you can just select all of them. Just be careful not to select a 64-bit driver if you are using 32-bit, or the wrong OS version.
I would recommend including both Storage and Network drivers, as those are the most common drivers that are missing in XP.
Once you proceed to the next screen, now we can finally finish the process. You can choose to directly burn the cd here, or you can select Create Image to create an ISO file that you can burn to a CD using whatever burning tool you have.
Note: If you chose to create an ISO, make sure to use the “Make ISO” button before you click Next.
At this point you can burn the ISO image to a CD, and then start your XP installation process.

Finding Drivers for XP
The best place to search for drivers for your hardware is at the manufacturer’s support website. The only problem is that almost every manufacturer seems to distribute their drivers in floppy disk image form, even though the computer they are for doesn’t have a floppy drive. Guess nobody has alerted them to get with the program.
We can still extract the drivers using an application called WinImage.
I downloaded and ran the executable, which extracted a file called f6flpy32.exe into a temporary directory. Don’t bother trying to run this one, because it’ll just prompt you for a floppy drive.
So how to get the drivers out of this file? There are a few options that you can try, depending on how the manufacturer packed the files.

You can use Winimage to extract them, which is a shareware software, but you can use it during the trial period for free.
You can try and use WinRar to extract the file. In many instances this will extract a *.flp file, which you can mount in a VMware virtual machine or potentially with some ISO mounting software.
Some drivers will allow you to automatically extract into a directory. You’ll have to try it and see what happens.
Other methods? If you’ve got other ideas, leave them in the comments and I’ll add them to this list.Start WinImage and then open the file, and you should see the contents. Just extract them to a folder, preferably with a useful name so you can remember it later.Good luck with your installation.
Download Nlite
Download Winimage

Windows xp error codes

noreply@blogger.com (kashif) — Thu, 15 Oct 2009 13:31:00 +0000

Code Error Message
0 The operation completed successfully.
1 Incorrect function.
2 The system cannot find the file specified.
3 The system cannot find the path specified.
4 The system cannot open the file.
5 Access is denied.
6 The handle is invalid.
7 The storage control blocks were destroyed.
8 Not enough storage is available to process this command.
9 The storage control block address is invalid.
10 The environment is incorrect.
11 An attempt was made to load a program with an incorrect format.
12 The access code is invalid.
13 The data is invalid.
14 Not enough storage is available to complete this operation.
15 The system cannot find the drive specified.
16 The directory cannot be removed.
17 The system cannot move the file to a different disk drive.
18 There are no more files.
19 The media is write protected.
20 The system cannot find the device specified.
21 The device is not ready.
22 The device does not recognize the command.
23 Data error (cyclic redundancy check).
24 The program issued a command but the command length is incorrect.
25 The drive cannot locate a specific area or track on the disk.
26 The specified disk or diskette cannot be accessed.
27 The drive cannot find the sector requested.
28 The printer is out of paper.
29 The system cannot write to the specified device.
30 The system cannot read from the specified device.
31 A device attached to the system is not functioning.
32 The process cannot access the file because it is being used by another process.
33 The process cannot access the file because another process has locked a portion of the file.
36 Too many files opened for sharing.
38 Reached the end of the file.
39 The disk is full.
50 The request is not supported.
51 Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
52 You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again.
53 The network path was not found.
54 The network is busy.
55 The specified network resource or device is no longer available.
56 The network BIOS command limit has been reached.
57 A network adapter hardware error occurred.
58 The specified server cannot perform the requested operation.
59 An unexpected network error occurred.
60 The remote adapter is not compatible.
61 The printer queue is full.

62 Space to store the file waiting to be printed is not available on the server.
63 Your file waiting to be printed was deleted.
64 The specified network name is no longer available.
65 Network access is denied.
66 The network resource type is not correct.
67 The network name cannot be found.
68 The name limit for the local computer network adapter card was exceeded.
69 The network BIOS session limit was exceeded.
70 The remote server has been paused or is in the process of being started.
71 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
72 The specified printer or disk device has been paused.
80 The file exists.
82 The directory or file cannot be created.
83 Fail on INT 24.
84 Storage to process this request is not available.
85 The local device name is already in use.
86 The specified network password is not correct.
87 The parameter is incorrect.
88 A write fault occurred on the network.
89 The system cannot start another process at this time.
100 Cannot create another system semaphore.
101 The exclusive semaphore is owned by another process.
102 The semaphore is set and cannot be closed.
103 The semaphore cannot be set again.
104 Cannot request exclusive semaphores at interrupt time.
105 The previous ownership of this semaphore has ended.
107 The program stopped because an alternate diskette was not inserted.
108 The disk is in use or locked by another process.
109 The pipe has been ended.
110 The system cannot open the device or file specified.
111 The file name is too long.
112 There is not enough space on the disk.
113 No more internal file identifiers available.
114 The target internal file identifier is incorrect.
117 The IOCTL call made by the application program is not correct.
118 The verify-on-write switch parameter value is not correct.
119 The system does not support the command requested.
120 This function is not supported on this system.
121 The semaphore timeout period has expired.
122 The data area passed to a system call is too small.
123 The filename, directory name, or volume label syntax is incorrect.
124 The system call level is not correct.
125 The disk has no volume label.
126 The specified module could not be found.
127 The specified procedure could not be found.
128 There are no child processes to wait for.
130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
131 An attempt was made to move the file pointer before the beginning of the file.
132 The file pointer cannot be set on the specified device or file.
133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
136 The system tried to delete the JOIN of a drive that is not joined.
137 The system tried to delete the substitution of a drive that is not substituted.
138 The system tried to join a drive to a directory on a joined drive.
139 The system tried to substitute a drive to a directory on a substituted drive.
140 The system tried to join a drive to a directory on a substituted drive.
141 The system tried to SUBST a drive to a directory on a joined drive.
142 The system cannot perform a JOIN or SUBST at this time.
143 The system cannot join or substitute a drive to or for a directory on the same drive.
144 The directory is not a subdirectory of the root directory.
145 The directory is not empty.
146 The path specified is being used in a substitute.
147 Not enough resources are available to process this command.
148 The path specified cannot be used at this time.
149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
150 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
151 The number of specified semaphore events for DosMuxSemWait is not correct.
152 DosMuxSemWait did not execute; too many semaphores are already set.
153 The DosMuxSemWait list is not correct.
154 The volume label you entered exceeds the label character limit of the target file system.
155 Cannot create another thread.
156 The recipient process has refused the signal.
157 The segment is already discarded and cannot be locked.
158 The segment is already unlocked.
159 The address for the thread ID is not correct.
160 One or more arguments are not correct.
161 The specified path is invalid.
162 A signal is already pending.
164 No more threads can be created in the system.
167 Unable to lock a region of a file.
170 The requested resource is in use.
173 A lock request was not outstanding for the supplied cancel region.
174 The file system does not support atomic changes to the lock type.
180 The system detected a segment number that was not correct.
183 Cannot create a file when that file already exists.
186 The flag passed is not correct.
187 The specified system semaphore name was not found.
196 The operating system cannot run this application program.
197 The operating system is not presently configured to run this application.
199 The operating system cannot run this application program.
200 The code segment cannot be greater than or equal to 64K.
203 The system could not find the environment option that was entered.
205 No process in the command subtree has a signal handler.
206 The filename or extension is too long.
207 The ring 2 stack is in use.
208 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
209 The signal being posted is not correct.
210 The signal handler cannot be set.
212 The segment is locked and cannot be reallocated.
214 Too many dynamic-link modules are attached to this program or dynamic-link module.
215 Cannot nest calls to LoadModule.
230 The pipe state is invalid.
231 All pipe instances are busy.
232 The pipe is being closed.
233 No process is on the other end of the pipe.
234 More data is available.
240 The session was canceled.
254 The specified extended attribute name was invalid.
255 The extended attributes are inconsistent.
258 The wait operation timed out.
259 No more data is available.
266 The copy functions cannot be used.
267 The directory name is invalid.
275 The extended attributes did not fit in the buffer.
276 The extended attribute file on the mounted file system is corrupt.
277 The extended attribute table file is full.
278 The specified extended attribute handle is invalid.
282 The mounted file system does not support extended attributes.
288 Attempt to release mutex not owned by caller.
298 Too many posts were made to a semaphore.
299 Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
300 The oplock request is denied.
301 An invalid oplock acknowledgment was received by the system.
302 The volume is too fragmented to complete this operation.
303 The file cannot be opened because it is in the process of being deleted.
487 Attempt to access invalid address.
534 Arithmetic result exceeded 32 bits.
535 There is a process on other end of the pipe.
536 Waiting for a process to open the other end of the pipe.
994 Access to the extended attribute was denied.
995 The I/O operation has been aborted because of either a thread exit or an application request.
996 Overlapped I/O event is not in a signaled state.
997 Overlapped I/O operation is in progress.
998 Invalid access to memory location.
999 Error performing inpage operation.
1001 Recursion too deep; the stack overflowed.
1002 The window cannot act on the sent message.
1003 Cannot complete this function.
1004 Invalid flags.
1005 The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
1006 The volume for a file has been externally altered so that the opened file is no longer valid.
1007 The requested operation cannot be performed in full-screen mode.
1008 An attempt was made to reference a token that does not exist.
1009 The configuration registry database is corrupt.
1010 The configuration registry key is invalid.
1011 The configuration registry key could not be opened.
1012 The configuration registry key could not be read.
1013 The configuration registry key could not be written.
1014 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
1015 The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
1016 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
1017 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
1018 Illegal operation attempted on a registry key that has been marked for deletion.
1019 System could not allocate the required space in a registry log.
1020 Cannot create a symbolic link in a registry key that already has subkeys or values.
1021 Cannot create a stable subkey under a volatile parent key.
1022 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
1051 A stop control has been sent to a service that other running services are dependent on.
1052 The requested control is not valid for this service.
1053 The service did not respond to the start or control request in a timely fashion.
1054 A thread could not be created for the service.
1055 The service database is locked.
1056 An instance of the service is already running.
1057 The account name is invalid or does not exist, or the password is invalid for the account name specified.
1058 The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
1059 Circular service dependency was specified.
1060 The specified service does not exist as an installed service.
1061 The service cannot accept control messages at this time.
1062 The service has not been started.
1063 The service process could not connect to the service controller.
1064 An exception occurred in the service when handling the control request.
1065 The database specified does not exist.
1066 The service has returned a service-specific error code.
1067 The process terminated unexpectedly.
1068 The dependency service or group failed to start.
1069 The service did not start due to a logon failure.
1070 After starting, the service hung in a start-pending state.
1071 The specified service database lock is invalid.
1072 The specified service has been marked for deletion.
1073 The specified service already exists.
1074 The system is currently running with the last-known-good configuration.
1075 The dependency service does not exist or has been marked for deletion.
1076 The current boot has already been accepted for use as the last-known-good control set.
1077 No attempts to start the service have been made since the last boot.
1078 The name is already in use as either a service name or a service display name.
1079 The account specified for this service is different from the account specified for other services running in the same process.
1080 Failure actions can only be set for Win32 services, not for drivers.
1081 This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
1082 No recovery program has been configured for this service.
1083 The executable program that this service is configured to run in does not implement the service.
1084 This service cannot be started in Safe Mode
1100 The physical end of the tape has been reached.
1101 A tape access reached a filemark.
1102 The beginning of the tape or a partition was encountered.
1103 A tape access reached the end of a set of files.
1104 No more data is on the tape.
1105 Tape could not be partitioned.
1106 When accessing a new tape of a multivolume partition, the current block size is incorrect.
1107 Tape partition information could not be found when loading a tape.
1108 Unable to lock the media eject mechanism.
1109 Unable to unload the media.
1110 The media in the drive may have changed.
1111 The I/O bus was reset.
1112 No media in drive.
1113 No mapping for the Unicode character exists in the target multi-byte code page.
1114 A dynamic link library (DLL) initialization routine failed.
1115 A system shutdown is in progress.
1116 Unable to abort the system shutdown because no shutdown was in progress.
1117 The request could not be performed because of an I/O device error.
1118 No serial device was successfully initialized. The serial driver will unload.
1119 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
1120 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121 A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122 No ID address mark was found on the floppy disk.
1123 Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
1124 The floppy disk controller reported an error that is not recognized by the floppy disk driver.
1125 The floppy disk controller returned inconsistent results in its registers.
1126 While accessing the hard disk, a recalibrate operation failed, even after retries.
1127 While accessing the hard disk, a disk operation failed even after retries.
1128 While accessing the hard disk, a disk controller reset was needed, but even that failed.
1129 Physical end of tape encountered.
1130 Not enough server storage is available to process this command.
1131 A potential deadlock condition has been detected.
1132 The base address or the file offset specified does not have the proper alignment.
1140 An attempt to change the system power state was vetoed by another application or driver.
1141 The system BIOS failed an attempt to change the system power state.
1142 An attempt was made to create more links on a file than the file system supports.
1150 The specified program requires a newer version of Windows.
1151 The specified program is not a Windows or MS-DOS program.
1152 Cannot start more than one instance of the specified program.
1153 The specified program was written for an earlier version of Windows.
1154 One of the library files needed to run this application is damaged.
1155 No application is associated with the specified file for this operation.
1156 An error occurred in sending the command to the application.
1157 One of the library files needed to run this application cannot be found.
1158 The current process has used all of its system allowance of handles for Window Manager objects.
1159 The message can be used only with synchronous operations.
1160 The indicated source element has no media.
1161 The indicated destination element already contains media.
1162 The indicated element does not exist.
1163 The indicated element is part of a magazine that is not present.
1164 The indicated device requires reinitialization due to hardware errors.
1165 The device has indicated that cleaning is required before further operations are attempted.
1166 The device has indicated that its door is open.
1167 The device is not connected.
1168 Element not found.
1169 There was no match for the specified key in the index.
1170 The property set specified does not exist on the object.
1171 The point passed to GetMouseMovePoints is not in the buffer.
1172 The tracking (workstation) service is not running.
1173 The Volume ID could not be found.
1175 Unable to remove the file to be replaced.
1176 Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
1177 Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
1178 The volume change journal is being deleted.
1179 The volume change journal is not active.
1180 A file was found, but it may not be the correct file.
1181 The journal entry has been deleted from the journal.
1200 The specified device name is invalid.
1201 The device is not currently connected but it is a remembered connection.
1202 The local device name has a remembered connection to another network resource.
1203 No network provider accepted the given network path.
1204 The specified network provider name is invalid.
1205 Unable to open the network connection profile.
1206 The network connection profile is corrupted.
1207 Cannot enumerate a noncontainer.
1208 An extended error has occurred.
1209 The format of the specified group name is invalid.
1210 The format of the specified computer name is invalid.
1211 The format of the specified event name is invalid.
1212 The format of the specified domain name is invalid.
1213 The format of the specified service name is invalid.
1214 The format of the specified network name is invalid.
1215 The format of the specified share name is invalid.
1216 The format of the specified password is invalid.
1217 The format of the specified message name is invalid.
1218 The format of the specified message destination is invalid.
1219 Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again..
1220 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
1221 The workgroup or domain name is already in use by another computer on the network.
1222 The network is not present or not started.
1223 The operation was canceled by the user.
1224 The requested operation cannot be performed on a file with a user-mapped section open.
1225 The remote system refused the network connection.
1226 The network connection was gracefully closed.
1227 The network transport endpoint already has an address associated with it.
1228 An address has not yet been associated with the network endpoint.
1229 An operation was attempted on a nonexistent network connection.
1230 An invalid operation was attempted on an active network connection.
1231 The network location cannot be reached. For information about network troubleshooting, see Windows Help.
1232 The network location cannot be reached. For information about network troubleshooting, see Windows Help.
1233 The network location cannot be reached. For information about network troubleshooting, see Windows Help.
1234 No service is operating at the destination network endpoint on the remote system.
1235 The request was aborted.
1236 The network connection was aborted by the local system.
1237 The operation could not be completed. A retry should be performed.
1238 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
1239 Attempting to log in during an unauthorized time of day for this account.
1240 The account is not authorized to log in from this station.
1241 The network address could not be used for the operation requested.
1242 The service is already registered.
1243 The specified service does not exist.
1244 The operation being requested was not performed because the user has not been authenticated.
1245 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
1246 Continue with work in progress.
1247 An attempt was made to perform an initialization operation when initialization has already been completed.
1248 No more local devices.
1249 The specified site does not exist.
1250 A domain controller with the specified name already exists.
1251 This operation is supported only when you are connected to the server.
1252 The group policy framework should call the extension even if there are no changes.
1253 The specified user does not have a valid profile.
1254 This operation is not supported on a Microsoft Small Business Server
1255 The server machine is shutting down.
1256 The remote system is not available. For information about network troubleshooting, see Windows Help.
1257 The security identifier provided is not from an account domain.
1258 The security identifier provided does not have a domain component.
1259 AppHelp dialog canceled thus preventing the application from starting.
1260 Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator.
1261 A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
1262 The share is currently offline or does not exist.
1263 The kerberos protocol encountered an error while validating the KDC certificate during smartcard logon.
1264 The kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
1265 The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
1266 The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log.
1267 An untrusted certificate authority was detected While processing the smartcard certificate used for authentication. Please contact your system administrator.
1268 The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator.
1269 The smartcard certificate used for authentication was not trusted. Please contact your system administrator.
1270 The smartcard certificate used for authentication has expired. Please contact your system administrator.
1271 The machine is locked and can not be shut down without the force option.
1273 An application-defined callback gave invalid data when called.
1274 The group policy framework should call the extension in the synchronous foreground policy refresh.
1275 This driver has been blocked from loading
1276 A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image.
1300 Not all privileges referenced are assigned to the caller.
1301 Some mapping between account names and security IDs was not done.
1302 No system quota limits are specifically set for this account.
1303 No encryption key is available. A well-known encryption key was returned.
1304 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
1305 The revision level is unknown.
1306 Indicates two revision levels are incompatible.
1307 This security ID may not be assigned as the owner of this object.
1308 This security ID may not be assigned as the primary group of an object.
1309 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
1310 The group may not be disabled.
1311 There are currently no logon servers available to service the logon request.
1312 A specified logon session does not exist. It may already have been terminated.
1313 A specified privilege does not exist.
1314 A required privilege is not held by the client.
1315 The name provided is not a properly formed account name.
1316 The specified user already exists.
1317 The specified user does not exist.
1318 The specified group already exists.
1319 The specified group does not exist.
1320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
1321 The specified user account is not a member of the specified group account.
1322 The last remaining administration account cannot be disabled or deleted.
1323 Unable to update the password. The value provided as the current password is incorrect.
1324 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
1325 Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain.
1326 Logon failure: unknown user name or bad password.
1327 Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.
1328 Logon failure: account logon time restriction violation.
1329 Logon failure: user not allowed to log on to this computer.
1330 Logon failure: the specified account password has expired.
1331 Logon failure: account currently disabled.
1332 No mapping between account names and security IDs was done.
1333 Too many local user identifiers (LUIDs) were requested at one time.
1334 No more local user identifiers (LUIDs) are available.
1335 The subauthority part of a security ID is invalid for this particular use.
1336 The access control list (ACL) structure is invalid.
1337 The security ID structure is invalid.
1338 The security descriptor structure is invalid.
1340 The inherited access control list (ACL) or access control entry (ACE) could not be built.
1341 The server is currently disabled.
1342 The server is currently enabled.
1343 The value provided was an invalid value for an identifier authority.
1344 No more memory is available for security information updates.
1345 The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
1346 Either a required impersonation level was not provided, or the provided impersonation level is invalid.
1347 Cannot open an anonymous level security token.
1348 The validation information class requested was invalid.
1349 The type of the token is inappropriate for its attempted use.
1350 Unable to perform a security operation on an object that has no associated security.
1351 Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
1352 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
1353 The domain was in the wrong state to perform the security operation.
1354 This operation is only allowed for the Primary Domain Controller of the domain.
1355 The specified domain either does not exist or could not be contacted.
1356 The specified domain already exists.
1357 An attempt was made to exceed the limit on the number of domains per server.
1358 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
1359 An internal error occurred.
1360 Generic access types were contained in an access mask which should already be mapped to nongeneric types.
1361 A security descriptor is not in the right format (absolute or self-relative).
1362 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
1363 Cannot start a new logon session with an ID that is already in use.
1364 A specified authentication package is unknown.
1365 The logon session is not in a state that is consistent with the requested operation.
1366 The logon session ID is already in use.
1367 A logon request contained an invalid logon type value.
1368 Unable to impersonate using a named pipe until data has been read from that pipe.
1369 The transaction state of a registry subtree is incompatible with the requested operation.
1370 An internal security database corruption has been encountered.
1371 Cannot perform this operation on built-in accounts.
1372 Cannot perform this operation on this built-in special group.
1373 Cannot perform this operation on this built-in special user.
1374 The user cannot be removed from a group because the group is currently the user's primary group.
1375 The token is already in use as a primary token.
1376 The specified local group does not exist.
1377 The specified account name is not a member of the local group.
1378 The specified account name is already a member of the local group.
1379 The specified local group already exists.
1380 Logon failure: the user has not been granted the requested logon type at this computer.
1381 The maximum number of secrets that may be stored in a single system has been exceeded.
1382 The length of a secret exceeds the maximum length allowed.
1383 The local security authority database contains an internal inconsistency.
1384 During a logon attempt, the user's security context accumulated too many security IDs.
1385 Logon failure: the user has not been granted the requested logon type at this computer.
1386 A cross-encrypted password is necessary to change a user password.
1387 A member could not be added to or removed from the local group because the member does not exist.
1388 A new member could not be added to a local group because the member has the wrong account type.
1389 Too many security IDs have been specified.
1390 A cross-encrypted password is necessary to change this user password.
1391 Indicates an ACL contains no inheritable components.
1392 The file or directory is corrupted and unreadable.
1393 The disk structure is corrupted and unreadable.
1394 There is no user session key for the specified logon session.
1395 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
1396 Logon Failure: The target account name is incorrect.
1397 Mutual Authentication failed. The server's password is out of date at the domain controller.
1398 There is a time and/or date difference between the client and server.
1399 This operation can not be performed on the current domain.
1400 Invalid window handle.
1401 Invalid menu handle.
1402 Invalid cursor handle.
1403 Invalid accelerator table handle.
1404 Invalid hook handle.
1405 Invalid handle to a multiple-window position structure.
1406 Cannot create a top-level child window.
1407 Cannot find window class.
1408 Invalid window; it belongs to other thread.
1409 Hot key is already registered.
1410 Class already exists.
1411 Class does not exist.
1412 Class still has open windows.
1413 Invalid index.
1414 Invalid icon handle.
1415 Using private DIALOG window words.
1416 The list box identifier was not found.
1417 No wildcards were found.
1418 Thread does not have a clipboard open.
1419 Hot key is not registered.
1420 The window is not a valid dialog window.
1421 Control ID not found.
1422 Invalid message for a combo box because it does not have an edit control.
1423 The window is not a combo box.
1424 Height must be less than 256.
1425 Invalid device context (DC) handle.
1426 Invalid hook procedure type.
1427 Invalid hook procedure.
1428 Cannot set nonlocal hook without a module handle.
1429 This hook procedure can only be set globally.
1430 The journal hook procedure is already installed.
1431 The hook procedure is not installed.
1432 Invalid message for single-selection list box.
1433 LB_SETCOUNT sent to non-lazy list box.
1434 This list box does not support tab stops.
1435 Cannot destroy object created by another thread.
1436 Child windows cannot have menus.
1437 The window does not have a system menu.
1438 Invalid message box style.
1439 Invalid system-wide (SPI_*) parameter.
1440 Screen already locked.
1441 All handles to windows in a multiple-window position structure must have the same parent.
1442 The window is not a child window.
1443 Invalid GW_* command.
1444 Invalid thread identifier.
1445 Cannot process a message from a window that is not a multiple document interface (MDI) window.
1446 Popup menu already active.
1447 The window does not have scroll bars.
1448 Scroll bar range cannot be greater than MAXLONG.
1449 Cannot show or remove the window in the way specified.
1450 Insufficient system resources exist to complete the requested service.
1451 Insufficient system resources exist to complete the requested service.
1452 Insufficient system resources exist to complete the requested service.
1453 Insufficient quota to complete the requested service.
1454 Insufficient quota to complete the requested service.
1455 The paging file is too small for this operation to complete.
1456 A menu item was not found.
1457 Invalid keyboard layout handle.
1458 Hook type not allowed.
1459 This operation requires an interactive window station.
1460 This operation returned because the timeout period expired.
1461 Invalid monitor handle.
1500 The event log file is corrupted.
1501 No event log file could be opened, so the event logging service did not start.
1502 The event log file is full.
1503 The event log file has changed between read operations.
1601 The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
1602 User cancelled installation.
1603 Fatal error during installation.
1604 Installation suspended, incomplete.
1605 This action is only valid for products that are currently installed.
1606 Feature ID not registered.
1607 Component ID not registered.
1608 Unknown property.
1609 Handle is in an invalid state.
1610 The configuration data for this product is corrupt. Contact your support personnel.
1611 Component qualifier not present.
1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
1613 This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
1614 Product is uninstalled.
1615 SQL query syntax invalid or unsupported.
1616 Record field does not exist.
1617 The device has been removed.
1618 Another installation is already in progress. Complete that installation before proceeding with this install.
1619 This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.
1620 This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
1621 There was an error starting the Windows Installer service user interface. Contact your support personnel.
1622 Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
1623 The language of this installation package is not supported by your system.
1624 Error applying transforms. Verify that the specified transform paths are valid.
1625 This installation is forbidden by system policy. Contact your system administrator.
1626 Function could not be executed.
1627 Function failed during execution.
1628 Invalid or unknown table specified.
1629 Data supplied is of wrong type.
1630 Data of this type is not supported.
1631 The Windows Installer service failed to start. Contact your support personnel.
1632 The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
1633 This installation package is not supported by this processor type. Contact your product vendor.
1634 Component not used on this computer.
1635 This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
1636 This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package.
1637 This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
1638 Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.
1639 Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
1640 Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.
1641 The requested operation completed successfully. The system will be restarted so the changes can take effect.
1642 The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer an
1643 The patch package is not permitted by software restriction policy.
1644 One or more customizations are not permitted by software restriction policy.
1700 The string binding is invalid.
1701 The binding handle is not the correct type.
1702 The binding handle is invalid.
1703 The RPC protocol sequence is not supported.
1704 The RPC protocol sequence is invalid.
1705 The string universal unique identifier (UUID) is invalid.
1706 The endpoint format is invalid.
1707 The network address is invalid.
1708 No endpoint was found.
1709 The timeout value is invalid.
1710 The object universal unique identifier (UUID) was not found.
1711 The object universal unique identifier (UUID) has already been registered.
1712 The type universal unique identifier (UUID) has already been registered.
1713 The RPC server is already listening.
1714 No protocol sequences have been registered.
1715 The RPC server is not listening.
1716 The manager type is unknown.
1717 The interface is unknown.
1718 There are no bindings.
1719 There are no protocol sequences.
1720 The endpoint cannot be created.
1721 Not enough resources are available to complete this operation.
1722 The RPC server is unavailable.
1723 The RPC server is too busy to complete this operation.
1724 The network options are invalid.
1725 There are no remote procedure calls active on this thread.
1726 The remote procedure call failed.
1727 The remote procedure call failed and did not execute.
1728 A remote procedure call (RPC) protocol error occurred.
1730 The transfer syntax is not supported by the RPC server.
1732 The universal unique identifier (UUID) type is not supported.
1733 The tag is invalid.
1734 The array bounds are invalid.
1735 The binding does not contain an entry name.
1736 The name syntax is invalid.
1737 The name syntax is not supported.
1739 No network address is available to use to construct a universal unique identifier (UUID).
1740 The endpoint is a duplicate.
1741 The authentication type is unknown.
1742 The maximum number of calls is too small.
1743 The string is too long.
1744 The RPC protocol sequence was not found.
1745 The procedure number is out of range.
1746 The binding does not contain any authentication information.
1747 The authentication service is unknown.
1748 The authentication level is unknown.
1749 The security context is invalid.
1750 The authorization service is unknown.
1751 The entry is invalid.
1752 The server endpoint cannot perform the operation.
1753 There are no more endpoints available from the endpoint mapper.
1754 No interfaces have been exported.
1755 The entry name is incomplete.
1756 The version option is invalid.
1757 There are no more members.
1758 There is nothing to unexport.
1759 The interface was not found.
1760 The entry already exists.
1761 The entry is not found.
1762 The name service is unavailable.
1763 The network address family is invalid.
1764 The requested operation is not supported.
1765 No security context is available to allow impersonation.
1766 An internal error occurred in a remote procedure call (RPC).
1767 The RPC server attempted an integer division by zero.
1768 An addressing error occurred in the RPC server.
1769 A floating-point operation at the RPC server caused a division by zero.
1770 A floating-point underflow occurred at the RPC server.
1771 A floating-point overflow occurred at the RPC server.
1772 The list of RPC servers available for the binding of auto handles has been exhausted.
1773 Unable to open the character translation table file.
1774 The file containing the character translation table has fewer than 512 bytes.
1775 A null context handle was passed from the client to the host during a remote procedure call.
1777 The context handle changed during a remote procedure call.
1778 The binding handles passed to a remote procedure call do not match.
1779 The stub is unable to get the remote procedure call handle.
1780 A null reference pointer was passed to the stub.
1781 The enumeration value is out of range.
1782 The byte count is too small.
1783 The stub received bad data.
1784 The supplied user buffer is not valid for the requested operation.
1785 The disk media is not recognized. It may not be formatted.
1786 The workstation does not have a trust secret.
1787 The security database on the server does not have a computer account for this workstation trust relationship.
1788 The trust relationship between the primary domain and the trusted domain failed.
1789 The trust relationship between this workstation and the primary domain failed.
1790 The network logon failed.
1791 A remote procedure call is already in progress for this thread.
1792 An attempt was made to logon, but the network logon service was not started.
1793 The user's account has expired.
1794 The redirector is in use and cannot be unloaded.
1795 The specified printer driver is already installed.
1796 The specified port is unknown.
1797 The printer driver is unknown.
1798 The print processor is unknown.
1799 The specified separator file is invalid.
1800 The specified priority is invalid.
1801 The printer name is invalid.
1802 The printer already exists.
1803 The printer command is invalid.
1804 The specified datatype is invalid.
1805 The environment specified is invalid.
1806 There are no more bindings.
1807 The account used is an interdomain trust account. Use your global user account or local user account to access this server.
1808 The account used is a computer account. Use your global user account or local user account to access this server.
1809 The account used is a server trust account. Use your global user account or local user account to access this server.
1810 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
1811 The server is in use and cannot be unloaded.
1812 The specified image file did not contain a resource section.
1813 The specified resource type cannot be found in the image file.
1814 The specified resource name cannot be found in the image file.
1815 The specified resource language ID cannot be found in the image file.
1816 Not enough quota is available to process this command.
1817 No interfaces have been registered.
1818 The remote procedure call was cancelled.
1819 The binding handle does not contain all required information.
1820 A communications failure occurred during a remote procedure call.
1821 The requested authentication level is not supported.
1822 No principal name registered.
1823 The error specified is not a valid Windows RPC error code.
1824 A UUID that is valid only on this computer has been allocated.
1825 A security package specific error occurred.
1826 Thread is not canceled.
1827 Invalid operation on the encoding/decoding handle.
1828 Incompatible version of the serializing package.
1829 Incompatible version of the RPC stub.
1830 The RPC pipe object is invalid or corrupted.
1831 An invalid operation was attempted on an RPC pipe object.
1832 Unsupported RPC pipe version.
1898 The group member was not found.
1899 The endpoint mapper database entry could not be created.
1900 The object universal unique identifier (UUID) is the nil UUID.
1901 The specified time is invalid.
1902 The specified form name is invalid.
1903 The specified form size is invalid.
1904 The specified printer handle is already being waited on
1905 The specified printer has been deleted.
1906 The state of the printer is invalid.
1907 The user's password must be changed before logging on the first time.
1908 Could not find the domain controller for this domain.
1909 The referenced account is currently locked out and may not be logged on to.
1910 The object exporter specified was not found.
1911 The object specified was not found.
1912 The object resolver set specified was not found.
1913 Some data remains to be sent in the request buffer.
1914 Invalid asynchronous remote procedure call handle.
1915 Invalid asynchronous RPC call handle for this operation.
1916 The RPC pipe object has already been closed.
1917 The RPC call completed before all pipes were processed.
1918 No more data is available from the RPC pipe.
1919 No site name is available for this machine.
1920 The file can not be accessed by the system.
1921 The name of the file cannot be resolved by the system.
1922 The entry is not of the expected type.
1923 Not all object UUIDs could be exported to the specified entry.
1924 Interface could not be exported to the specified entry.
1925 The specified profile entry could not be added.
1926 The specified profile element could not be added.
1927 The specified profile element could not be removed.
1928 The group element could not be added.
1929 The group element could not be removed.
1930 The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
1931 The context has expired and can no longer be used.
2000 The pixel format is invalid.
2001 The specified driver is invalid.
2002 The window style or class attribute is invalid for this operation.
2003 The requested metafile operation is not supported.
2004 The requested transformation operation is not supported.
2005 The requested clipping operation is not supported.
2010 The specified color management module is invalid.
2011 The specified color profile is invalid.
2012 The specified tag was not found.
2013 A required tag is not present.
2014 The specified tag is already present.
2015 The specified color profile is not associated with any device.
2016 The specified color profile was not found.
2017 The specified color space is invalid.
2018 Image Color Management is not enabled.
2019 There was an error while deleting the color transform.
2020 The specified color transform is invalid.
2021 The specified transform does not match the bitmap's color space.
2022 The specified named color index is not present in the profile.
2102 The workstation driver is not installed.
2103 The server could not be located.
2104 An internal error occurred. The network cannot access a shared memory segment.
2105 A network resource shortage occurred .
2106 This operation is not supported on workstations.
2107 The device is not connected.
2108 The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.
2109 The network connection was made successfully using default credentials.
2114 The Server service is not started.
2115 The queue is empty.
2116 The device or directory does not exist.
2117 The operation is invalid on a redirected resource.
2118 The name has already been shared.
2119 The server is currently out of the requested resource.
2121 Requested addition of items exceeds the maximum allowed.
2122 The Peer service supports only two simultaneous users.
2123 The API return buffer is too small.
2127 A remote API error occurred.
2131 An error occurred when opening or reading the configuration file.
2136 A general network error occurred.
2137 The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service.
2138 The Workstation service has not been started.
2139 The requested information is not available.
2140 An internal Windows 2000 error occurred.
2141 The server is not configured for transactions.
2142 The requested API is not supported on the remote server.
2143 The event name is invalid.
2144 The computer name already exists on the network. Change it and restart the computer.
2146 The specified component could not be found in the configuration information.
2147 The specified parameter could not be found in the configuration information.
2149 A line in the configuration file is too long.
2150 The printer does not exist.
2151 The print job does not exist.
2152 The printer destination cannot be found.
2153 The printer destination already exists.
2154 The printer queue already exists.
2155 No more printers can be added.
2156 No more print jobs can be added.
2157 No more printer destinations can be added.
2158 This printer destination is idle and cannot accept control operations.
2159 This printer destination request contains an invalid control function.
2160 The print processor is not responding.
2161 The spooler is not running.
2162 This operation cannot be performed on the print destination in its current state.
2163 This operation cannot be performed on the printer queue in its current state.
2164 This operation cannot be performed on the print job in its current state.
2165 A spooler memory allocation failure occurred.
2166 The device driver does not exist.
2167 The data type is not supported by the print processor.
2168 The print processor is not installed.
2180 The service database is locked.
2181 The service table is full.
2182 The requested service has already been started.
2183 The service does not respond to control actions.
2184 The service has not been started.
2185 The service name is invalid.
2186 The service is not responding to the control function.
2187 The service control is busy.
2188 The configuration file contains an invalid service program name.
2189 The service could not be controlled in its present state.
2190 The service ended abnormally.
2191 The requested pause or stop is not valid for this service.
2192 The service control dispatcher could not find the service name in the dispatch table.
2193 The service control dispatcher pipe read failed.
2194 A thread for the new service could not be created.
2200 This workstation is already logged on to the local-area network.
2201 The workstation is not logged on to the local-area network.
2202 The specified username is invalid.
2203 The password parameter is invalid.
2204 The logon processor did not add the message alias.
2205 The logon processor did not add the message alias.
2206 The logoff processor did not delete the message alias.
2207 The logoff processor did not delete the message alias.
2209 Network logons are paused.
2210 A centralized logon-server conflict occurred.
2211 The server is configured without a valid user path.
2212 An error occurred while loading or running the logon script.
2214 The logon server was not specified. Your computer will be logged on as STANDALONE.
2215 The logon server could not be found.
2216 There is already a logon domain for this computer.
2217 The logon server could not validate the logon.
2219 The security database could not be found.
2220 The group name could not be found.
2221 The user name could not be found.
2222 The resource name could not be found.
2223 The group already exists.
2224 The account already exists.
2225 The resource permission list already exists.
2226 This operation is only allowed on the primary domain controller of the domain.
2227 The security database has not been started.
2228 There are too many names in the user accounts database.
2229 A disk I/O failure occurred.
2230 The limit of 64 entries per resource was exceeded.
2231 Deleting a user with a session is not allowed.
2232 The parent directory could not be located.
2233 Unable to add to the security database session cache segment.
2234 This operation is not allowed on this special group.
2235 This user is not cached in user accounts database session cache.
2236 The user already belongs to this group.
2237 The user does not belong to this group.
2238 This user account is undefined.
2239 This user account has expired.
2240 The user is not allowed to log on from this workstation.
2241 The user is not allowed to log on at this time.
2242 The password of this user has expired.
2243 The password of this user cannot change.
2244 This password cannot be used now.
2245 The password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements.
2246 The password of this user is too recent to change.
2247 The security database is corrupted.
2248 No updates are necessary to this replicant network/local security database.
2249 This replicant database is outdated; synchronization is required.
2250 This network connection does not exist.
2251 This asg_type is invalid.
2252 This device is currently being shared.
2270 The computer name could not be added as a message alias. The name may already exist on the network.
2271 The Messenger service is already started.
2272 The Messenger service failed to start.
2273 The message alias could not be found on the network.
2274 This message alias has already been forwarded.
2275 This message alias has been added but is still forwarded.
2276 This message alias already exists locally.
2277 The maximum number of added message aliases has been exceeded.
2278 The computer name could not be deleted.
2279 Messages cannot be forwarded back to the same workstation.
2280 An error occurred in the domain message processor.
2281 The message was sent, but the recipient has paused the Messenger service.
2282 The message was sent but not received.
2283 The message alias is currently in use. Try again later.
2284 The Messenger service has not been started.
2285 The name is not on the local computer.
2286 The forwarded message alias could not be found on the network.
2287 The message alias table on the remote station is full.
2288 Messages for this alias are not currently being forwarded.
2289 The broadcast message was truncated.
2294 This is an invalid device name.
2295 A write fault occurred.
2297 A duplicate message alias exists on the network.
2298 This message alias will be deleted later.
2299 The message alias was not successfully deleted from all networks.
2300 This operation is not supported on computers with multiple networks.
2310 This shared resource does not exist.
2311 This device is not shared.
2312 A session does not exist with that computer name.
2314 There is not an open file with that identification number.
2315 A failure occurred when executing a remote administration command.
2316 A failure occurred when opening a remote temporary file.
2317 The data returned from a remote administration command has been truncated to 64K.
2318 This device cannot be shared as both a spooled and a non-spooled resource.
2319 The information in the list of servers may be incorrect.
2320 The computer is not active in this domain.
2321 The share must be removed from the Distributed File System before it can be deleted.
2331 The operation is invalid for this device.
2332 This device cannot be shared.
2333 This device was not open.
2334 This device name list is invalid.
2335 The queue priority is invalid.
2337 There are no shared communication devices.
2338 The queue you specified does not exist.
2340 This list of devices is invalid.
2341 The requested device is invalid.
2342 This device is already in use by the spooler.
2343 This device is already in use as a communication device.
2351 This computer name is invalid.
2354 The string and prefix specified are too long.
2356 This path component is invalid.
2357 Could not determine the type of input.
2362 The buffer for types is not big enough.
2370 Profile files cannot exceed 64K.
2371 The start offset is out of range.
2372 The system cannot delete current connections to network resources.
2373 The system was unable to parse the command line in this file.
2374 An error occurred while loading the profile file.
2375 Errors occurred while saving the profile file. The profile was partially saved.
2378 This log file has changed between reads.
2380 The source path cannot be a directory.
2381 The source path is illegal.
2382 The destination path is illegal.
2383 The source and destination paths are on different servers.
2385 The Run server you requested is paused.
2389 An error occurred when communicating with a Run server.
2391 An error occurred when starting a background process.
2392 The shared resource you are connected to could not be found.
2400 The LAN adapter number is invalid.
2401 This network connection has files open or requests pending.
2402 Active connections still exist.
2403 This share name or password is invalid.
2404 The device is in use by an active process and cannot be disconnected.
2405 The drive letter is in use locally.
2430 The specified client is already registered for the specified event.
2431 The alert table is full.
2432 An invalid or nonexistent alert name was raised.
2433 The alert recipient is invalid.
2434 A user's session with this server has been deleted because the user's logon hours are no longer valid.
2440 The log file does not contain the requested record number.
2450 The user accounts database is not configured correctly.
2451 This operation is not permitted when the Netlogon service is running.
2452 This operation is not allowed on the last administrative account.
2453 Could not find domain controller for this domain.
2454 Could not set logon information for this user.
2455 The Netlogon service has not been started.
2456 Unable to add to the user accounts database.
2457 This server's clock is not synchronized with the primary domain controller's clock.
2458 A password mismatch has been detected.
2460 The server identification does not specify a valid server.
2461 The session identification does not specify a valid session.
2462 The connection identification does not specify a valid connection.
2463 There is no space for another entry in the table of available servers.
2464 The server has reached the maximum number of sessions it supports.
2465 The server has reached the maximum number of connections it supports.
2466 The server cannot open more files because it has reached its maximum number.
2467 There are no alternate servers registered on this server.
2470 Try down-level (remote admin protocol) version of API instead.
2480 The UPS driver could not be accessed by the UPS service.
2481 The UPS service is not configured correctly.
2482 The UPS service could not access the specified Comm Port.
2483 The UPS indicated a line fail or low battery situation. Service not started.
2484 The UPS service failed to perform a system shut down.
2500 The program below returned an MS-DOS error code:
2501 The program below needs more memory:
2502 The program below called an unsupported MS-DOS function:
2503 The workstation failed to boot.
2504 The file below is corrupt.
2505 No loader is specified in the boot-block definition file.
2506 NetBIOS returned an error: The NCB and SMB are dumped above.
2507 A disk I/O error occurred.
2508 Image parameter substitution failed.
2509 Too many image parameters cross disk sector boundaries.
2510 The image was not generated from an MS-DOS diskette formatted with /S.
2511 Remote boot will be restarted later.
2512 The call to the Remoteboot server failed.
2513 Cannot connect to the Remoteboot server.
2514 Cannot open image file on the Remoteboot server.
2515 Connecting to the Remoteboot server...
2516 Connecting to the Remoteboot server...
2517 Remote boot service was stopped; check the error log for the cause of the problem.
2518 Remote boot startup failed; check the error log for the cause of the problem.
2519 A second connection to a Remoteboot resource is not allowed.
2550 The browser service was configured with MaintainServerList=No.
2610 Service failed to start since none of the network adapters started with this service.
2611 Service failed to start due to bad startup information in the registry.
2612 Service failed to start because its database is absent or corrupt.
2613 Service failed to start because RPLFILES share is absent.
2614 Service failed to start because RPLUSER group is absent.
2615 Cannot enumerate service records.
2616 Workstation record information has been corrupted.
2617 Workstation record was not found.
2618 Workstation name is in use by some other workstation.
2619 Profile record information has been corrupted.
2620 Profile record was not found.
2621 Profile name is in use by some other profile.
2622 There are workstations using this profile.
2623 Configuration record information has been corrupted.
2624 Configuration record was not found.
2625 Adapter id record information has been corrupted.
2626 An internal service error has occurred.
2627 Vendor id record information has been corrupted.
2628 Boot block record information has been corrupted.
2629 The user account for this workstation record is missing.
2630 The RPLUSER local group could not be found.
2631 Boot block record was not found.
2632 Chosen profile is incompatible with this workstation.
2633 Chosen network adapter id is in use by some other workstation.
2634 There are profiles using this configuration.
2635 There are workstations, profiles or configurations using this boot block.
2636 Service failed to backup Remoteboot database.
2637 Adapter record was not found.
2638 Vendor record was not found.
2639 Vendor name is in use by some other vendor record.
2640 (boot name, vendor id) is in use by some other boot block record.
2641 Configuration name is in use by some other configuration.
2660 The internal database maintained by the DFS service is corrupt
2661 One of the records in the internal DFS database is corrupt
2662 There is no DFS name whose entry path matches the input Entry Path
2663 A root or link with the given name already exists
2664 The server share specified is already shared in the DFS
2665 The indicated server share does not support the indicated DFS namespace
2666 The operation is not valid on this portion of the namespace
2667 The operation is not valid on this portion of the namespace
2668 The operation is ambiguous because the link has multiple servers
2669 Unable to create a link
2670 The server is not DFS Aware
2671 The specified rename target path is invalid
2672 The specified DFS link is offline
2673 The specified server is not a server for this link
2674 A cycle in the DFS name was detected
2675 The operation is not supported on a server-based DFS
2676 This link is already supported by the specified server-share
2677 Can't remove the last server-share supporting this root or link
2678 The operation is not supported for an Inter-DFS link
2679 The internal state of the DFS Service has become inconsistent
2680 The DFS Service has been installed on the specified server
2681 The DFS data being reconciled is identical
2682 The DFS root cannot be deleted - Uninstall DFS if required
2683 A child or parent directory of the share is already in a DFS
2690 DFS internal error
2691 This machine is already joined to a domain.
2692 This machine is not currently joined to a domain.
2693 This machine is a domain controller and cannot be unjoined from a domain.
2694 The destination domain controller does not support creating machine accounts in OUs.
2695 The specified workgroup name is invalid.
2696 The specified computer name is incompatible with the default language used on the domain controller.
2697 The specified computer account could not be found.
2698 This version of Windows cannot be joined to a domain.
2999 This is the last error in NERR range.
3000 The specified print monitor is unknown.
3001 The specified printer driver is currently in use.
3002 The spool file was not found.
3003 A StartDocPrinter call was not issued.
3004 An AddJob call was not issued.
3005 The specified print processor has already been installed.
3006 The specified print monitor has already been installed.
3007 The specified print monitor does not have the required functions.
3008 The specified print monitor is currently in use.
3009 The requested operation is not allowed when there are jobs queued to the printer.
3010 The requested operation is successful. Changes will not be effective until the system is rebooted.
3011 The requested operation is successful. Changes will not be effective until the service is restarted.
3012 No printers were found.
3013 The printer driver is known to be unreliable.
3014 The printer driver is known to harm the system.
3023 There is a problem with a configuration of user specified shut down command file. The UPS service started anyway.
3029 Local security could not be started because the user accounts database (NET.ACC) was missing or corrupted, and no usable backup database was present. THE SYSTEM IS NOT SECURE.
3037 @I *LOGON HOURS
3039 Replicator limit for files in a directory has been exceeded.
3040 Replicator limit for tree depth has been exceeded.
3046 Cannot log on. User is currently logged on and argument TRYUSER is set to NO.
3052 The required parameter was not provided on the command line or in the configuration file.
3054 A request for resource could not be satisfied.
3055 A problem exists with the system configuration.
3056 A system error has occurred.
3057 An internal consistency error has occurred.
3058 The configuration file or the command line has an ambiguous option.
3059 The configuration file or the command line has a duplicate parameter.
3060 The service did not respond to control and was stopped with the DosKillProc function.
3061 An error occurred when attempting to run the service program.
3062 The sub-service failed to start.
3064 There is a problem with the file.
3070 memory
3071 disk space
3072 thread
3073 process
3074 Security Failure.
3075 Bad or missing LAN Manager root directory.
3076 The network software is not installed.
3077 The server is not started.
3078 The server cannot access the user accounts database (NET.ACC).
3079 Incompatible files are installed in the LANMAN tree.
3080 The LANMAN\LOGS directory is invalid.
3081 The domain specified could not be used.
3082 The computer name is being used as a message alias on another computer.
3083 The announcement of the server name failed.
3084 The user accounts database is not configured correctly.
3085 The server is not running with user-level security.
3087 The workstation is not configured properly.
3088 View your error log for details.
3089 Unable to write to this file.
3090 ADDPAK file is corrupted. Delete LANMAN\NETPROG\ADDPAK.SER and reapply all ADDPAKs.
3091 The LM386 server cannot be started because CACHE.EXE is not running.
3092 There is no account for this computer in the security database.
3093 This computer is not a member of the group SERVERS.
3094 The group SERVERS is not present in the local security database.
3095 This computer is configured as a member of a workgroup, not as a member of a domain. The Netlogon service does not need to run in this configuration.
3096 The primary Domain Controller for this domain could not be located.
3098 The service failed to authenticate with the primary domain controller.
3099 There is a problem with the security database creation date or serial number.
3100 The operation failed because a network software error occurred.
3102 The service failed to obtain a long-term lock on the segment for network control blocks (NCBs). The error code is the data.
3103 The service failed to release the long-term lock on the segment for network control blocks (NCBs). The error code is the data.
3106 An unexpected network control block (NCB) was received. The NCB is the data.
3107 The network is not started.
3108 A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed. The data shown is in this format: DWORD approx CS:IP of call to ioctl or fsctl WORD error code WORD ioctl or fsctl number
3111 An unexpected NetBIOS error occurred. The error code is the data.
3112 An illegal server message block (SMB) was received. The SMB is the data.
3114 Some entries in the error log were lost because of a buffer overflow.
3120 Initialization parameters controlling resource usage other than net buffers are sized so that too much memory is needed.
3121 The server cannot increase the size of a memory segment.
3124 The server failed to start. Either all three chdev parameters must be zero or all three must be nonzero.
3129 The server cannot update the AT schedule file. The file is corrupted.
3130 The server encountered an error when calling NetIMakeLMFileName. The error code is the data.
3132 Longterm lock of the server buffers failed. Check swap disk's free space and restart the system to start the server.
3140 The service has stopped due to repeated consecutive occurrences of a network control block (NCB) error. The last bad NCB follows in raw data.
3141 The Message server has stopped due to a lock on the Message server shared data segment.
3151 Unable to display message POPUP due to system VIO call error. The error code is the data.
3152 An illegal server message block (SMB) was received. The SMB is the data.
3160 The workstation information segment is bigger than 64K. The size follows, in DWORD format:
3161 The workstation was unable to get the name-number of the computer.
3162 The workstation could not initialize the Async NetBIOS Thread. The error code is the data.
3163 The workstation could not open the initial shared segment. The error code is the data.
3164 The workstation host table is full.
3165 A bad mailslot server message block (SMB) was received. The SMB is the data.
3166 The workstation encountered an error while trying to start the user accounts database. The error code is the data.
3167 The workstation encountered an error while responding to an SSI revalidation request. The function code and the error codes are the data.
3174 The server could not read the AT schedule file.
3175 The server found an invalid AT schedule record.
3176 The server could not find an AT schedule file so it created one.
3185 Local security could not be started because the user accounts database (NET.ACC) was missing or corrupted, and no usable backup database was present. THE SYSTEM IS NOT SECURE.
3204 The server could not create a thread. The THREADS parameter in the CONFIG.SYS file should be increased.
3213 Replicator limit for files in a directory has been exceeded.
3214 Replicator limit for tree depth has been exceeded.
3215 Unrecognized message received in mailslot.
3217 Cannot log on. User is currently logged on and argument TRYUSER is set to NO.
3230 A power failure was detected at the server.
3231 The UPS service performed server shut down.
3232 The UPS service did not complete execution of the user specified shut down command file.
3233 The UPS driver could not be opened. The error code is the data.
3234 Power has been restored.
3235 There is a problem with a configuration of user specified shut down command file.
3256 There was an unrecoverable error in the dynamic- link library of the service.
3257 The system returned an unexpected error code. The error code is the data.
3258 The fault-tolerance error log file, LANROOT\LOGS\FT.LOG, is more than 64K.
3259 The fault-tolerance error-log file, LANROOT\LOGS\FT.LOG, had the update in progress bit set upon opening, which means that the system crashed while working on the error log.
3301 Remote IPC
3302 Remote Admin
3303 Logon server share
3304 A network error occurred.
3400 There is not enough memory to start the Workstation service.
3401 An error occurred when reading the NETWORKS entry in the LANMAN.INI file.
3404 There are too many NETWORKS entries in the LANMAN.INI file.
3408 The program cannot be used with this operating system.
3409 The redirector is already installed.
3411 There was an error installing NETWKSTA.SYS. Press ENTER to continue.
3412 Resolver linkage problem.
3419 You have open files or devices, and a forced disconnection may cause you to lose data.
3420 Default Share for Internal Use
3421 Messenger Service
3500 The command completed successfully.
3501 You used an invalid option.
3503 The command contains an invalid number of arguments.
3504 The command completed with one or more errors.
3505 You used an option with an invalid value.
3510 A command was used with conflicting switches.
3512 The software requires a newer version of the operating system.
3513 More data is available than can be returned by Windows.
3515 This command can be used only on a Windows Domain Controller.
3516 This command cannot be used on a Windows Domain Controller.
3520 These Windows services are started:
3525 Stopping the Workstation service also stops the Server service.
3526 The workstation has open files.
3533 The service is starting or stopping. Please try again later.
3534 The service did not report an error.
3535 An error occurred controlling the device.
3660 These workstations have sessions on this server:
3661 These workstations have sessions with open files on this server:
3666 The message alias is forwarded.
3670 You have these remote connections:
3671 Continuing will cancel the connections.
3676 New connections will be remembered.
3677 New connections will not be remembered.
3678 An error occurred while saving your profile. The state of your remembered connections has not changed.
3679 An error occurred while reading your profile.
3682 No network services are started.
3683 There are no entries in the list.
3689 The Workstation service is already running. Windows will ignore command options for the workstation.
3694 The shared queue cannot be deleted while a print job is being spooled to the queue.
3710 An error occurred while opening the Help file.
3711 The Help file is empty.
3712 The Help file is corrupted.
3714 This operation is privileged on systems with earlier versions of the software.
3716 The device type is unknown.
3717 The log file has been corrupted.
3718 Program filenames must end with .EXE.
3719 A matching share could not be found so nothing was deleted.
3720 A bad value is in the units-per-week field of the user record.
3725 An error occurred when the share was deleted.
3726 The user name is invalid.
3727 The password is invalid.
3728 The passwords do not match.
3729 Your persistent connections were not all restored.
3730 This is not a valid computer name or domain name.
3732 Default permissions cannot be set for that resource.
3734 A valid password was not entered.
3735 A valid name was not entered.
3736 The resource named cannot be shared.
3737 The permissions string contains invalid permissions.
3738 You can only perform this operation on printers and communication devices.
3743 The server is not configured for remote administration.
3752 No users have sessions with this server.
3756 This is an invalid response.
3757 No valid response was provided.
3758 The destination list provided does not match the destination list of the printer queue.
3761 The time range specified ends before it starts.
3764 Time supplied is not exactly on the hour.
3765 12 and 24 hour time formats may not be mixed.
3767 An illegal date format has been supplied.
3768 An illegal day range has been supplied.
3769 An illegal time range has been supplied.
3770 Arguments to NET USER are invalid. Check the minimum password length and/or arguments supplied.
3771 The value for ENABLESCRIPT must be YES.
3773 An illegal country code has been supplied.
3774 The user was successfully created but could not be added to the USERS local group.
3775 The user context supplied is invalid.
3777 Sending files is no longer supported.
3778 You may not specify paths for ADMIN$ and IPC$ shares.
3784 Only disk shares can be marked as cacheable
3802 This schedule date is invalid.
3803 The LANMAN root directory is unavailable.
3804 The SCHED.LOG file could not be opened.
3805 The Server service has not been started.
3806 The AT job ID does not exist.
3807 The AT schedule file is corrupted.
3808 The delete failed due to a problem with the AT schedule file.
3809 The command line cannot exceed 259 characters.
3810 The AT schedule file could not be updated because the disk is full.
3812 The AT schedule file is invalid. Please delete the file and create a new one.
3813 The AT schedule file was deleted.
3814 The syntax of this command is: AT [id] [/DELETE] AT time [/EVERY:date | /NEXT:date] command The AT command schedules a program command to run at a later date and time on a server. It also displays the list of programs and commands scheduled to be run.
3815 The AT command has timed-out. Please try again later.
3816 The minimum password age for user accounts cannot be greater than the maximum password age.
3817 You have specified a value that is incompatible with servers with down-level software. Please specify a lower value.
3901 ****
3902 **** unexpected end of message ****
3905 Press ESC to exit
3906 ...
3912 Could not locate a time-server.
3915 The user's home directory could not be determined.
3916 The user's home directory has not been specified.
3920 There are no available drive letters left.
3936 This computer is not currently configured to use a specific SNTP server.
3953 The syntax is incorrect.
3960 You specified an invalid file number.
3961 You specified an invalid print job number.
3963 The user or group account specified cannot be found.
3965 The user was added but could not be enabled for File and Print Services for NetWare.
3966 File and Print Services for NetWare is not installed.
3967 Cannot set user properties for File and Print Services for NetWare.
3969 NetWare compatible logon
4000 WINS encountered an error while processing the command.
4001 The local WINS can not be deleted.
4002 The importation from the file failed.
4003 The backup failed. Was a full backup done before?
4004 The backup failed. Check the directory to which you are backing the database.
4005 The name does not exist in the WINS database.
4006 Replication with a nonconfigured partner is not allowed.
4100 The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
4200 The GUID passed was not recognized as valid by a WMI data provider.
4201 The instance name passed was not recognized as valid by a WMI data provider.
4202 The data item ID passed was not recognized as valid by a WMI data provider.
4203 The WMI request could not be completed and should be retried.
4204 The WMI data provider could not be located.
4205 The WMI data provider references an instance set that has not been registered.
4206 The WMI data block or event notification has already been enabled.
4207 The WMI data block is no longer available.
4208 The WMI data service is not available.
4209 The WMI data provider failed to carry out the request.
4210 The WMI MOF information is not valid.
4211 The WMI registration information is not valid.
4212 The WMI data block or event notification has already been disabled.
4213 The WMI data item or data block is read only.
4214 The WMI data item or data block could not be changed.
4300 The media identifier does not represent a valid medium.
4301 The library identifier does not represent a valid library.
4302 The media pool identifier does not represent a valid media pool.
4303 The drive and medium are not compatible or exist in different libraries.
4304 The medium currently exists in an offline library and must be online to perform this operation.
4305 The operation cannot be performed on an offline library.
4306 The library, drive, or media pool is empty.
4307 The library, drive, or media pool must be empty to perform this operation.
4308 No media is currently available in this media pool or library.
4309 A resource required for this operation is disabled.
4310 The media identifier does not represent a valid cleaner.
4311 The drive cannot be cleaned or does not support cleaning.
4312 The object identifier does not represent a valid object.
4313 Unable to read from or write to the database.
4314 The database is full.
4315 The medium is not compatible with the device or media pool.
4316 The resource required for this operation does not exist.
4317 The operation identifier is not valid.
4318 The media is not mounted or ready for use.
4319 The device is not ready for use.
4320 The operator or administrator has refused the request.
4321 The drive identifier does not represent a valid drive.
4322 Library is full. No slot is available for use.
4323 The transport cannot access the medium.
4324 Unable to load the medium into the drive.
4325 Unable to retrieve the drive status.
4326 Unable to retrieve the slot status.
4327 Unable to retrieve status about the transport.
4328 Cannot use the transport because it is already in use.
4329 Unable to open or close the inject/eject port.
4330 Unable to eject the medium because it is in a drive.
4331 A cleaner slot is already reserved.
4332 A cleaner slot is not reserved.
4333 The cleaner cartridge has performed the maximum number of drive cleanings.
4334 Unexpected on-medium identifier.
4335 The last remaining item in this group or resource cannot be deleted.
4336 The message provided exceeds the maximum size allowed for this parameter.
4337 The volume contains system or paging files.
4338 The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.
4339 This offline media cannot be mounted on this system since no enabled drives are present which can be used.
4340 A cleaner cartridge is present in the tape library.
4341 (Y/N) [N]
4342 Error
4343 OK
4344 Y
4345 N
4346 Any
4347 A
4348 P
4349 (not found)
4350 The remote storage service was not able to recall the file.
4351 The remote storage service is not operational at this time.
4352 The remote storage service encountered a media error.
4354 Please type the password:
4358 Type a password for the user:
4359 Type the password for the shared resource:
4360 Type your password:
4361 Retype the password to confirm:
4362 Type the user's old password:
4363 Type the user's new password:
4364 Type your new password:
4365 Type the Replicator service password:
4368 Type your user name:
4372 Print job detail
4378 The following running services can be controlled:
4379 Statistics are available for the following running services:
4381 The syntax of this command is:
4382 The options of this command are:
4383 Please enter the name of the Primary Domain Controller:
4385 Sunday
4386 Monday
4387 Tuesday
4388 Wednesday
4389 Thursday
4390 The file or directory is not a reparse point.
4391 The reparse point attribute cannot be set because it conflicts with an existing attribute.
4392 The data present in the reparse point buffer is invalid.
4393 The tag present in the reparse point buffer is invalid.
4394 There is a mismatch between the tag specified in the request and the tag present in the reparse point.
4395 W
4396 Th
4397 F
4398 S
4399 Sa
4401 Group name
4402 Comment
4403 Members
4406 Alias name
4407 Comment
4408 Members
4411 User name
4412 Full Name
4413 Comment
4414 User's comment
4415 Parameters
4416 Country code
4417 Privilege level
4418 Operator privileges
4419 Account active
4420 Account expires
4421 Password last set
4422 Password expires
4423 Password changeable
4424 Workstations allowed
4425 Maximum disk space
4426 Unlimited
4427 Local Group Memberships
4428 Domain controller
4429 Logon script
4430 Last logon
4431 Global Group memberships
4432 Logon hours allowed
4433 All
4434 None
4436 Home directory
4437 Password required
4438 User may change password
4439 User profile
4440 Locked
4450 Computer name
4451 User name
4452 Software version
4453 Workstation active on
4454 Windows NT root directory
4455 Workstation domain
4456 Logon domain
4457 Other domain(s)
4458 COM Open Timeout (sec)
4459 COM Send Count (byte)
4460 COM Send Timeout (msec)
4461 DOS session print time-out (sec)
4462 Maximum error log size (K)
4463 Maximum cache memory (K)
4464 Number of network buffers
4465 Number of character buffers
4466 Size of network buffers
4467 Size of character buffers
4468 Full Computer name
4469 Workstation Domain DNS Name
4470 Windows 2002
4481 Server Name
4482 Server Comment
4483 Send administrative alerts to
4484 Software version
4485 Peer Server
4486 Windows NT
4487 Server Level
4488 Windows NT Server
4489 Server is active on
4492 Server hidden
4500 Single Instance Storage is not available on this volume.
4506 Maximum Logged On Users
4507 Maximum concurrent administrators
4508 Maximum resources shared
4509 Maximum connections to resources
4510 Maximum open files on server
4511 Maximum open files per session
4512 Maximum file locks
4520 Idle session time (min)
4526 Share-level
4527 User-level
4530 Unlimited Server
4570 Force user logoff how long after time expires?:
4571 Lock out account after how many bad passwords?:
4572 Minimum password age (days):
4573 Maximum password age (days):
4574 Minimum password length:
4575 Length of password history maintained:
4576 Computer role:
4577 Primary Domain controller for workstation domain:
4578 Lockout threshold:
4579 Lockout duration (minutes):
4580 Lockout observation window (minutes):
4600 Statistics since
4601 Sessions accepted
4602 Sessions timed-out
4603 Sessions errored-out
4604 Kilobytes sent
4605 Kilobytes received
4606 Mean response time (msec)
4607 Network errors
4608 Files accessed
4609 Print jobs spooled
4610 System errors
4611 Password violations
4612 Permission violations
4613 Communication devices accessed
4614 Sessions started
4615 Sessions reconnected
4616 Sessions starts failed
4617 Sessions disconnected
4618 Network I/O's performed
4619 Files and pipes accessed
4620 Times buffers exhausted
4621 Big buffers
4622 Request buffers
4626 Connections made
4627 Connections failed
4630 Bytes received
4631 Server Message Blocks (SMBs) received
4632 Bytes transmitted
4633 Server Message Blocks (SMBs) transmitted
4634 Read operations
4635 Write operations
4636 Raw reads denied
4637 Raw writes denied
4638 Network errors
4639 Connections made
4640 Reconnections made
4641 Server disconnects
4642 Sessions started
4643 Hung sessions
4644 Failed sessions
4645 Failed operations
4646 Use count
4647 Failed use count
4655 The message name forwarding was successfully canceled.
4661 The password was changed successfully.
4664 The message was successfully sent to all users of the network.
4666 The message was successfully sent to all users of this server.
4696 Windows NT Server
4697 Windows NT Workstation
4698 MS-DOS Enhanced Workstation
4700 Server Name Remark
4702 (UNC)
4703 ...
4704 Domain
4706 Invalid network provider. Available networks are:
4710 Disk
4711 Print
4712 Comm
4713 IPC
4714 Status Local Remote Network
4715 OK
4716 Dormant
4717 Paused
4718 Disconnected
4719 Error
4720 Connecting
4721 Reconnecting
4722 Status
4723 Local name
4724 Remote name
4725 Resource type
4726 # Opens
4727 # Connections
4728 Unavailable
4730 Share name Resource Remark
4731 Share name
4732 Resource
4733 Spooled
4734 Permission
4735 Maximum users
4736 No limit
4737 Users
4739 Caching
4740 ID Path User name # Locks
4741 File ID
4742 Locks
4743 Permissions
4744 Share name
4745 Type
4746 Used as
4747 Comment
4750 Computer User name Client Type Opens Idle time
4751 Computer
4752 Sess time
4753 Idle time
4754 Share name Type # Opens
4755 Client type
4756 Guest logon
4770 Manual caching of documents
4771 Automatic caching of documents
4772 Automatic caching of programs and documents
4773 Caching disabled
4774 Automatic
4775 Manual
4776 Documents
4777 Programs
4778 None
4800 Name
4801 Forwarded to
4802 Forwarded to you from
4803 Users of this server
4804 Net Send has been interrupted by a Ctrl+Break from the user.
4810 Name Job # Size Status
4811 jobs
4812 Print
4813 Name
4814 Job #
4815 Size
4816 Status
4817 Separator file
4818 Comment
4819 Priority
4820 Print after
4821 Print until
4822 Print processor
4823 Additional info
4824 Parameters
4825 Print Devices
4826 Printer Active
4827 Printer held
4828 Printer error
4829 Printer being deleted
4830 Printer status unknown
4841 Job #
4842 Submitting user
4843 Notify
4844 Job data type
4845 Job parameters
4846 Waiting
4847 Held in queue
4848 Spooling
4849 Paused
4850 Offline
4851 Error
4852 Out of paper
4853 Intervention required
4854 Printing
4855 on
4862 Driver
4930 User name Type Date
4931 Lockout
4932 Service
4933 Server
4934 Server started
4935 Server paused
4936 Server continued
4937 Server stopped
4938 Session
4939 Logon Guest
4940 Logon User
4941 Logon Administrator
4942 Logoff normal
4943 Logon
4944 Logoff error
4945 Logoff auto-disconnect
4946 Logoff administrator-disconnect
4947 Logoff forced by logon restrictions
4948 Service
4957 Account
4964 Account system settings were modified
4965 Logon restriction
4966 Limit exceeded: UNKNOWN
4967 Limit exceeded: Logon hours
4968 Limit exceeded: Account expired
4969 Limit exceeded: Workstation ID invalid
4970 Limit exceeded: Account disabled
4971 Limit exceeded: Account deleted
4972 Share
4978 Bad password
4979 Administrator privilege required
4980 Access
4984 Access denied
4985 Unknown
4986 Other
4987 Duration:
4988 Duration: Not available
4989 Duration: Less than one second
4990 (none)
4994 Access ended
4995 Log on to network
4996 Logon denied
4997 Program Message Time
4999 Account unlocked by administrator
5000 Log off network
5001 The cluster resource cannot be moved to another group because other resources are dependent on it.
5002 The cluster resource dependency cannot be found.
5003 The cluster resource cannot be made dependent on the specified resource because it is already dependent.
5004 The cluster resource is not online.
5005 A cluster node is not available for this operation.
5006 The cluster resource is not available.
5007 The cluster resource could not be found.
5008 The cluster is being shut down.
5009 A cluster node cannot be evicted from the cluster unless the node is down or it is the last node.
5010 The object already exists.
5011 The object is already in the list.
5012 The cluster group is not available for any new requests.
5013 The cluster group could not be found.
5014 The operation could not be completed because the cluster group is not online.
5015 The cluster node is not the owner of the resource.
5016 The cluster node is not the owner of the group.
5017 The cluster resource could not be created in the specified resource monitor.
5018 The cluster resource could not be brought online by the resource monitor.
5019 The operation could not be completed because the cluster resource is online.
5020 The cluster resource could not be deleted or brought offline because it is the quorum resource.
5021 The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.
5022 The cluster software is shutting down.
5023 The group or resource is not in the correct state to perform the requested operation.
5024 The properties were stored but not all changes will take effect until the next time the resource is brought online.
5025 The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.
5026 The cluster resource could not be deleted since it is a core resource.
5027 The quorum resource failed to come online.
5028 The quorum log could not be created or mounted successfully.
5029 The cluster log is corrupt.
5030 The record could not be written to the cluster log since it exceeds the maximum size.
5031 The cluster log exceeds its maximum size.
5032 No checkpoint record was found in the cluster log.
5033 The minimum required disk space needed for logging is not available.
5034 The cluster node failed to take control of the quorum resource because the resource is owned by another active node.
5035 A cluster network is not available for this operation.
5036 A cluster node is not available for this operation.
5037 All cluster nodes must be running to perform this operation.
5038 A cluster resource failed.
5039 The cluster node is not valid.
5040 The cluster node already exists.
5041 A node is in the process of joining the cluster.
5042 The cluster node was not found.
5043 The cluster local node information was not found.
5044 The cluster network already exists.
5045 The cluster network was not found.
5046 The cluster network interface already exists.
5047 The cluster network interface was not found.
5048 The cluster request is not valid for this object.
5049 The cluster network provider is not valid.
5050 The cluster node is down.
5051 The cluster node is not reachable.
5052 The cluster node is not a member of the cluster.
5053 A cluster join operation is not in progress.
5054 The cluster network is not valid.
5055 Mar
5056 The cluster node is up.
5057 The cluster IP address is already in use.
5058 The cluster node is not paused.
5059 No cluster security context is available.
5060 The cluster network is not configured for internal cluster communication.
5061 The cluster node is already up.
5062 The cluster node is already down.
5063 The cluster network is already online.
5064 The cluster network is already offline.
5065 The cluster node is already a member of the cluster.
5066 The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.
5067 One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network.
5068 This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.
5069 The cluster quorum resource is not allowed to have any dependencies.
5070 The cluster node is paused.
5071 The cluster resource cannot be brought online. The owner node cannot run this resource.
5072 The cluster node is not ready to perform the requested operation.
5073 The cluster node is shutting down.
5074 The cluster join operation was aborted.
5075 The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.
5076 This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.
5077 The system configuration changed during the cluster join or form operation. The join or form operation was aborted.
5078 The specified resource type was not found.
5079 The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.
5080 The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.
5081 No authentication package could be registered with the RPC server.
5082 You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.
5083 The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.
5084 The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.
5085 A non locker code got a request to reserve the lock for making global updates.
5086 The quorum disk could not be located by the cluster service.
5087 The backed up cluster database is possibly corrupt.
5088 A DFS root already exists in this cluster node.
5089 An attempt to modify a resource property failed because it conflicts with another existing property.
5090 Spain
5091 Denmark
5092 Sweden
5093 Norway
5094 Germany
5095 Australia
5096 Japan
5097 Korea
5098 China (PRC)
5099 Taiwan
5100 Asia
5101 Portugal
5102 Finland
5103 Arabic
5104 Hebrew
5153 The UPS service is about to perform final shut down.
5170 The Workstation must be started with the NET START command.
5175 Remote IPC
5176 Remote Admin
5177 Default share
5291 Never
5292 Never
5293 Never
5295 NET.HLP
5296 NET.HLP
5300 The network control block (NCB) request completed successfully. The NCB is the data.
5301 Illegal network control block (NCB) buffer length on SEND DATAGRAM, SEND BROADCAST, ADAPTER STATUS, or SESSION STATUS. The NCB is the data.
5302 The data descriptor array specified in the network control block (NCB) is invalid. The NCB is the data.
5303 The command specified in the network control block (NCB) is illegal. The NCB is the data.
5304 The message correlator specified in the network control block (NCB) is invalid. The NCB is the data.
5305 A network control block (NCB) command timed-out. The session may have terminated abnormally. The NCB is the data.
5306 An incomplete network control block (NCB) message was received. The NCB is the data.
5307 The buffer address specified in the network control block (NCB) is illegal. The NCB is the data.
5308 The session number specified in the network control block (NCB) is not active. The NCB is the data.
5309 No resource was available in the network adapter. The network control block (NCB) request was refused. The NCB is the data.
5310 The session specified in the network control block (NCB) was closed. The NCB is the data.
5311 The network control block (NCB) command was canceled. The NCB is the data.
5312 The message segment specified in the network control block (NCB) is illogical. The NCB is the data.
5313 The name already exists in the local adapter name table. The network control block (NCB) request was refused. The NCB is the data.
5314 The network adapter name table is full. The network control block (NCB) request was refused. The NCB is the data.
5315 The network name has active sessions and is now de-registered. The network control block (NCB) command completed. The NCB is the data.
5316 A previously issued Receive Lookahead command is active for this session. The network control block (NCB) command was rejected. The NCB is the data.
5317 The local session table is full. The network control block (NCB) request was refused. The NCB is the data.
5318 A network control block (NCB) session open was rejected. No LISTEN is outstanding on the remote computer. The NCB is the data.
5319 The name number specified in the network control block (NCB) is illegal. The NCB is the data.
5320 The call name specified in the network control block (NCB) cannot be found or did not answer. The NCB is the data.
5321 The name specified in the network control block (NCB) was not found. Cannot put '*' or 00h in the NCB name. The NCB is the data.
5322 The name specified in the network control block (NCB) is in use on a remote adapter. The NCB is the data.
5323 The name specified in the network control block (NCB) has been deleted. The NCB is the data.
5324 The session specified in the network control block (NCB) ended abnormally. The NCB is the data.
5325 The network protocol has detected two or more identical names on the network. The network control block (NCB) is the data.
5326 An unexpected protocol packet was received. There may be an incompatible remote device. The network control block (NCB) is the data.
5333 The NetBIOS interface is busy. The network control block (NCB) request was refused. The NCB is the data.
5334 There are too many network control block (NCB) commands outstanding. The NCB request was refused. The NCB is the data.
5335 The adapter number specified in the network control block (NCB) is illegal. The NCB is the data.
5336 The network control block (NCB) command completed while a cancel was occurring. The NCB is the data.
5337 The name specified in the network control block (NCB) is reserved. The NCB is the data.
5338 The network control block (NCB) command is not valid to cancel. The NCB is the data.
5351 There are multiple network control block (NCB) requests for the same session. The NCB request was refused. The NCB is the data.
5352 There has been a network adapter error. The only NetBIOS command that may be issued is an NCB RESET. The network control block (NCB) is the data.
5354 The maximum number of applications was exceeded. The network control block (NCB) request was refused. The NCB is the data.
5356 The requested resources are not available. The network control block (NCB) request was refused. The NCB is the data.
5364 A system error has occurred. The network control block (NCB) request was refused. The NCB is the data.
5365 A ROM checksum failure has occurred. The network control block (NCB) request was refused. The NCB is the data.
5366 A RAM test failure has occurred. The network control block (NCB) request was refused. The NCB is the data.
5367 A digital loopback failure has occurred. The network control block (NCB) request was refused. The NCB is the data.
5368 An analog loopback failure has occurred. The network control block (NCB) request was refused. The NCB is the data.
5369 An interface failure has occurred. The network control block (NCB) request was refused. The NCB is the data.
5370 An unrecognized network control block (NCB) return code was received. The NCB is the data.
5380 A network adapter malfunction has occurred. The network control block (NCB) request was refused. The NCB is the data.
5381 The network control block (NCB) command is still pending. The NCB is the data.
5509 Windows 2000 could not be started as configured. A previous working configuration was used instead.
5600 Could not share the User or Script path.
5601 The password for this computer is not found in the local security database.
5602 An internal error occurred while accessing the computer's local or network security database.
5705 The change log cache maintained by the Netlogon service for database changes is corrupted. The Netlogon service is resetting the change log.
5728 Could not load any transport.
5739 This domain has more global groups than can be replicated to a LanMan BDC. Either delete some of your global groups or remove the LanMan BDCs from the domain.
5742 Service failed to retrieve messages needed to boot remote boot clients.
5743 Service experienced a severe error and can no longer provide remote boot for 3Com 3Start remote boot clients.
5744 Service experienced a severe system error and will shut itself down.
5760 Service experienced error evaluating RPL configurations.
5761 Service experienced error creating RPL profiles for all configurations.
5762 Service experienced error accessing registry.
5763 Service experienced error replacing possibly outdated RPLDISK.SYS.
5764 Service experienced error adding security accounts or setting file permissions. These accounts are the RPLUSER local group and the user accounts for the individual RPL workstations.
5765 Service failed to back up its database.
5766 Service failed to initialize from its database. The database may be missing or corrupted. Service will attempt restoring the database from the backup.
5767 Service failed to restore its database from the backup. Service will not start.
5768 Service successfully restored its database from the backup.
5769 Service failed to initialize from its restored database. Service will not start.
5771 The Remoteboot database was in NT 3.5 / NT 3.51 format and NT is attempting to convert it to NT 4.0 format. The JETCONV converter will write to the Application event log when it is finished.
5781 Dynamic registration or deregistration of one or more DNS records failed because no DNS servers are available.
5890 An operation was attempted that is incompatible with the current membership state of the node.
5891 The quorum resource does not contain the quorum log.
5892 The membership engine requested shutdown of the cluster service on this node.
5893 The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.
5894 A matching network for the specified IP address could not be found. Please also specify a subnet mask and a cluster network.
5895 The actual data type of the property did not match the expected data type of the property.
5896 The cluster node was evicted from the cluster successfully, but the node was not cleaned up. Extended status information explaining why the node was not cleaned up is available.
5897 Two or more parameter values specified for a resource's properties are in conflict.
5898 This computer cannot be made a member of a cluster.
5899 This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.
5900 A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster.
6000 The specified file could not be encrypted.
6001 The specified file could not be decrypted.
6002 The specified file is encrypted and the user does not have the ability to decrypt it.
6003 There is no valid encryption recovery policy configured for this system.
6004 The required encryption driver is not loaded for this system.
6005 The file was encrypted with a different encryption driver than is currently loaded.
6006 There are no EFS keys defined for the user.
6007 The specified file is not encrypted.
6008 The specified file is not in the defined EFS export format.
6009 The specified file is read only.
6010 The directory has been disabled for encryption.
6011 The server is not trusted for remote encryption operation.
6012 Recovery policy configured for this system contains invalid recovery certificate.
6013 The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.
6014 The disk partition does not support file encryption.
6015 This machine is disabled for file encryption.
6016 A newer system is required to decrypt this encrypted file.
6118 The list of servers for this workgroup is not currently available
6200 The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts.
7001 The specified session name is invalid.
7002 The specified protocol driver is invalid.
7003 The specified protocol driver was not found in the system path.
7004 The specified terminal connection driver was not found in the system path.
7005 A registry key for event logging could not be created for this session.
7006 A service with the same name already exists on the system.
7007 A close operation is pending on the session.
7008 There are no free output buffers available.
7009 The MODEM.INF file was not found.
7010 The modem name was not found in MODEM.INF.
7011 The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem.
7012 The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on.
7013 Carrier detect has failed or carrier has been dropped due to disconnect.
7014 Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.
7015 Busy signal detected at remote site on callback.
7016 Voice detected at remote site on callback.
7017 Transport driver error
7022 The specified session cannot be found.
7023 The specified session name is already in use.
7024 The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.
7025 An attempt has been made to connect to a session whose video mode is not supported by the current client.
7035 The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
7037 Your interactive logon privilege has been disabled. Please contact your administrator.
7038 The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.
7040 The client failed to respond to the server connect message.
7041 Disconnecting the console session is not supported.
7042 Reconnecting a disconnected session to the console is not supported.
7044 The request to control another session remotely was denied.
7045 The requested session access is denied.
7049 The specified terminal connection driver is invalid.
7050 The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on.
7051 The requested session is not configured to allow remote control.
7052 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a unique license number.
7053 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please contact your system administrator.
7054 The system has reached its licensed logon limit. Please try again later.
7055 The client you are using is not licensed to use this system. Your logon request is denied.
7056 The system license has expired. Your logon request is denied.
7057 Remote control could not be terminated because the specified session is not currently being remotely controlled.
7058 The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.
8001 The file replication service API was called incorrectly.
8002 The file replication service cannot be started.
8003 The file replication service cannot be stopped.
8004 The file replication service API terminated the request. The event log may have more information.
8005 The file replication service terminated the request. The event log may have more information.
8006 The file replication service cannot be contacted. The event log may have more information.
8007 The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information.
8008 The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information.
8009 The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information.
8010 The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information.
8011 The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information.
8012 The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information.
8013 The file replication service cannot populate the system volume because of an internal error. The event log may have more information.
8014 The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information.
8015 The file replication service cannot process the request. The system volume is busy with a previous request.
8016 The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information.
8017 The file replication service detected an invalid parameter.
8200 An error occurred while installing the directory service. For more information, see the event log.
8201 The directory service evaluated group memberships locally.
8202 The specified directory service attribute or value does not exist.
8203 The attribute syntax specified to the directory service is invalid.
8204 The attribute type specified to the directory service is not defined.
8205 The specified directory service attribute or value already exists.
8206 The directory service is busy.
8207 The directory service is unavailable.
8208 The directory service was unable to allocate a relative identifier.
8209 The directory service has exhausted the pool of relative identifiers.
8210 The requested operation could not be performed because the directory service is not the master for that type of operation.
8211 The directory service was unable to initialize the subsystem that allocates relative identifiers.
8212 The requested operation did not satisfy one or more constraints associated with the class of the object.
8213 The directory service can perform the requested operation only on a leaf object.
8214 The directory service cannot perform the requested operation on the RDN attribute of an object.
8215 The directory service detected an attempt to modify the object class of an object.
8216 The requested cross-domain move operation could not be performed.
8217 Unable to contact the global catalog server.
8218 The policy object is shared and can only be modified at the root.
8219 The policy object does not exist.
8220 The requested policy information is only in the directory service.
8221 A domain controller promotion is currently active.
8222 A domain controller promotion is not currently active
8224 An operations error occurred.
8225 A protocol error occurred.
8226 The time limit for this request was exceeded.
8227 The size limit for this request was exceeded.
8228 The administrative limit for this request was exceeded.
8229 The compare response was false.
8230 The compare response was true.
8231 The requested authentication method is not supported by the server.
8232 A more secure authentication method is required for this server.
8233 Inappropriate authentication.
8234 The authentication mechanism is unknown.
8235 A referral was returned from the server.
8236 The server does not support the requested critical extension.
8237 This request requires a secure connection.
8238 Inappropriate matching.
8239 A constraint violation occurred.
8240 There is no such object on the server.
8241 There is an alias problem.
8242 An invalid dn syntax has been specified.
8243 The object is a leaf object.
8244 There is an alias dereferencing problem.
8245 The server is unwilling to process the request.
8246 A loop has been detected.
8247 There is a naming violation.
8248 The result set is too large.
8249 The operation affects multiple DSAs
8250 The server is not operational.
8251 A local error has occurred.
8252 An encoding error has occurred.
8253 A decoding error has occurred.
8254 The search filter cannot be recognized.
8255 One or more parameters are illegal.
8256 The specified method is not supported.
8257 No results were returned.
8258 The specified control is not supported by the server.
8259 A referral loop was detected by the client.
8260 The preset referral limit was exceeded.
8261 The search requires a SORT control.
8262 The search results exceed the offset range specified.
8301 The root object must be the head of a naming context. The root object cannot have an instantiated parent.
8302 The add replica operation cannot be performed. The naming context must be writable in order to create the replica.
8303 A reference to an attribute that is not defined in the schema occurred.
8304 The maximum size of an object has been exceeded.
8305 An attempt was made to add an object to the directory with a name that is already in use.
8306 An attempt was made to add an object of a class that does not have an RDN defined in the schema.
8307 An attempt was made to add an object using an RDN that is not the RDN defined in the schema.
8308 None of the requested attributes were found on the objects.
8309 The user buffer is too small.
8310 The attribute specified in the operation is not present on the object.
8311 Illegal modify operation. Some aspect of the modification is not permitted.
8312 The specified object is too large.
8313 The specified instance type is not valid.
8314 The operation must be performed at a master DSA.
8315 The object class attribute must be specified.
8316 A required attribute is missing.
8317 An attempt was made to modify an object to include an attribute that is not legal for its class.
8318 The specified attribute is already present on the object.
8320 The specified attribute is not present, or has no values.
8321 Mutliple values were specified for an attribute that can have only one value.
8322 A value for the attribute was not in the acceptable range of values.
8323 The specified value already exists.
8324 The attribute cannot be removed because it is not present on the object.
8325 The attribute value cannot be removed because it is not present on the object.
8326 The specified root object cannot be a subref.
8327 Chaining is not permitted.
8328 Chained evaluation is not permitted.
8329 The operation could not be performed because the object's parent is either uninstantiated or deleted.
8330 Having a parent that is an alias is not permitted. Aliases are leaf objects.
8331 The object and parent must be of the same type, either both masters or both replicas.
8332 The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.
8333 Directory object not found.
8334 The aliased object is missing.
8335 The object name has bad syntax.
8336 It is not permitted for an alias to refer to another alias.
8337 The alias cannot be dereferenced.
8338 The operation is out of scope.
8339 The operation cannot continue because the object is in the process of being removed.
8340 The DSA object cannot be deleted.
8341 A directory service error has occurred.
8342 The operation can only be performed on an internal master DSA object.
8343 The object must be of class DSA.
8344 Insufficient access rights to perform the operation.
8345 The object cannot be added because the parent is not on the list of possible superiors.
8346 Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM).
8347 The name has too many parts.
8348 The name is too long.
8349 The name value is too long.
8350 The directory service encountered an error parsing a name.
8351 The directory service cannot get the attribute type for a name.
8352 The name does not identify an object; the name identifies a phantom.
8353 The security descriptor is too short.
8354 The security descriptor is invalid.
8355 Failed to create name for deleted object.
8356 The parent of a new subref must exist.
8357 The object must be a naming context.
8358 It is not permitted to add an attribute which is owned by the system.
8359 The class of the object must be structural; you cannot instantiate an abstract class.
8360 The schema object could not be found.
8361 A local object with this GUID (dead or alive) already exists.
8362 The operation cannot be performed on a back link.
8363 The cross reference for the specified naming context could not be found.
8364 The operation could not be performed because the directory service is shutting down.
8365 The directory service request is invalid.
8366 The role owner attribute could not be read.
8367 The requested FSMO operation failed. The current FSMO holder could not be contacted.
8368 Modification of a DN across a naming context is not permitted.
8369 The attribute cannot be modified because it is owned by the system.
8370 Only the replicator can perform this function.
8371 The specified class is not defined.
8372 The specified class is not a subclass.
8373 The name reference is invalid.
8374 A cross reference already exists.
8375 It is not permitted to delete a master cross reference.
8376 Subtree notifications are only supported on NC heads.
8377 Notification filter is too complex.
8378 Schema update failed: duplicate RDN.
8379 Schema update failed: duplicate OID.
8380 Schema update failed: duplicate MAPI identifier.
8381 Schema update failed: duplicate schema-id GUID.
8382 Schema update failed: duplicate LDAP display name.
8383 Schema update failed: range-lower less than range upper.
8384 Schema update failed: syntax mismatch.
8385 Schema deletion failed: attribute is used in must-contain.
8386 Schema deletion failed: attribute is used in may-contain.
8387 Schema update failed: attribute in may-contain does not exist.
8388 Schema update failed: attribute in must-contain does not exist.
8389 Schema update failed: class in aux-class list does not exist or is not an auxiliary class.
8390 Schema update failed: class in poss-superiors does not exist.
8391 Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules.
8392 Schema update failed: Rdn-Att-Id has wrong syntax.
8393 Schema deletion failed: class is used as auxiliary class.
8394 Schema deletion failed: class is used as sub class.
8395 Schema deletion failed: class is used as poss superior.
8396 Schema update failed in recalculating validation cache.
8397 The tree deletion is not finished. The request must be made again to continue deleting the tree.
8398 The requested delete operation could not be performed.
8399 Cannot read the governs class identifier for the schema record.
8400 The attribute schema has bad syntax.
8401 The attribute could not be cached.
8402 The class could not be cached.
8403 The attribute could not be removed from the cache.
8404 The class could not be removed from the cache.
8405 The distinguished name attribute could not be read.
8406 A required subref is missing.
8407 The instance type attribute could not be retrieved.
8408 An internal error has occurred.
8409 A database error has occurred.
8410 The attribute GOVERNSID is missing.
8411 An expected attribute is missing.
8412 The specified naming context is missing a cross reference.
8413 A security checking error has occurred.
8414 The schema is not loaded.
8415 Schema allocation failed. Please check if the machine is running low on memory.
8416 Failed to obtain the required syntax for the attribute schema.
8417 The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.
8418 The replication operation failed because of a schema mismatch between the servers involved.
8419 The DSA object could not be found.
8420 The naming context could not be found.
8421 The naming context could not be found in the cache.
8422 The child object could not be retrieved.
8423 The modification was not permitted for security reasons.
8424 The operation cannot replace the hidden record.
8425 The hierarchy file is invalid.
8426 The attempt to build the hierarchy table failed.
8427 The directory configuration parameter is missing from the registry.
8428 The attempt to count the address book indices failed.
8429 The allocation of the hierarchy table failed.
8430 The directory service encountered an internal failure.
8431 The directory service encountered an unknown failure.
8432 A root object requires a class of 'top'.
8433 This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.
8434 The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.
8435 The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.
8436 The replication operation failed.
8437 An invalid parameter was specified for this replication operation.
8438 The directory service is too busy to complete the replication operation at this time.
8439 The distinguished name specified for this replication operation is invalid.
8440 The naming context specified for this replication operation is invalid.
8441 The distinguished name specified for this replication operation already exists.
8442 The replication system encountered an internal error.
8443 The replication operation encountered a database inconsistency.
8444 The server specified for this replication operation could not be contacted.
8445 The replication operation encountered an object with an invalid instance type.
8446 The replication operation failed to allocate memory.
8447 The replication operation encountered an error with the mail system.
8448 The replication reference information for the target server already exists.
8449 The replication reference information for the target server does not exist.
8450 The naming context cannot be removed because it is replicated to another server.
8451 The replication operation encountered a database error.
8452 The naming context is in the process of being removed or is not replicated from the specified server.
8453 Replication access was denied.
8454 The requested operation is not supported by this version of the directory service.
8455 The replication remote procedure call was cancelled.
8456 The source server is currently rejecting replication requests.
8457 The destination server is currently rejecting replication requests.
8458 The replication operation failed due to a collision of object names.
8459 The replication source has been reinstalled.
8460 The replication operation failed because a required parent object is missing.
8461 The replication operation was preempted.
8462 The replication synchronization attempt was abandoned because of a lack of updates.
8463 The replication operation was terminated because the system is shutting down.
8464 The replication synchronization attempt failed as the destination partial attribute set is not a subset of source partial attribute set.
8465 The replication synchronization attempt failed because a master replica attempted to sync from a partial replica.
8466 The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.
8467 The version of the Active Directory schema of the source forest is not compatible with the version of Active Directory on this computer. You must upgrade the operating system on a domain controller in the source forest before this computer can be added a
8468 Schema update failed: An attribute with the same link identifier already exists.
8469 Name translation: Generic processing error.
8470 Name translation: Could not find the name or insufficient right to see name.
8471 Name translation: Input name mapped to more than one output name.
8472 Name translation: Input name found, but not the associated output format.
8473 Name translation: Unable to resolve completely, only the domain was found.
8474 Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire.
8475 Modification of a constructed att is not allowed.
8476 The OM-Object-Class specified is incorrect for an attribute with the specified syntax.
8477 The replication request has been posted; waiting for reply.
8478 The requested operation requires a directory service, and none was available.
8479 The LDAP display name of the class or attribute contains non-ASCII characters.
8480 The requested search operation is only supported for base searches.
8481 The search failed to retrieve attributes from the database.
8482 The schema update operation tried to add a backward link attribute that has no corresponding forward link.
8483 Source and destination of a cross-domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object.
8484 Source and destination of a cross-domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object.
8485 Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.
8486 Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.
8487 Destination of a cross-domain move is not authoritative for the destination naming context.
8488 Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object.
8489 Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.
8490 Another operation which requires exclusive access to the PDC FSMO is already in progress.
8491 A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.
8492 This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, eg: trust account or restricted RID, which prevent its move.
8493 Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry.
8494 A naming context head must be the immediate child of another naming context head, not of an interior node.
8495 The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global
8496 Destination domain must be in native mode.
8497 The operation can not be performed because the server does not have an infrastructure container in the domain of interest.
8498 Cross-domain move of non-empty account groups is not allowed.
8499 Cross-domain move of non-empty resource groups is not allowed.
8500 The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.
8501 Tree deletions starting at an object which has an NC head as a descendant are not allowed.
8502 The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use.
8503 The directory service failed to identify the list of objects to delete while attempting a tree deletion.
8505 Only an administrator can modify the membership list of an administrative group.
8506 Cannot change the primary group ID of a domain controller account.
8507 An attempt is made to modify the base schema.
8508 Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by addin
8509 Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner.
8510 An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.
8511 The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.
8512 The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.
8513 The specified group type is invalid.
8514 You cannot nest global groups in a mixed domain if the group is security-enabled.
8515 You cannot nest local groups in a mixed domain if the group is security-enabled.
8516 A global group cannot have a local group as a member.
8517 A global group cannot have a universal group as a member.
8518 A universal group cannot have a local group as a member.
8519 A global group cannot have a cross-domain member.
8520 A local group cannot have another cross domain local group as a member.
8521 A group with primary members cannot change to a security-disabled group.
8522 The schema cache load failed to convert the string default SD on a class-schema object.
8523 Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)
8524 The DSA operation is unable to proceed because of a DNS lookup failure.
8525 While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.
8526 The Security Descriptor attribute could not be read.
8527 The object requested was not found, but an object with that key was found.
8528 The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1
8529 Security Account Manager needs to get the boot password.
8530 Security Account Manager needs to get the boot key from floppy disk.
8531 Directory Service cannot start.
8532 Directory Services could not start.
8533 The connection between client and server requires packet privacy or better.
8534 The source domain may not be in the same forest as destination.
8535 The destination domain must be in the forest.
8536 The operation requires that destination domain auditing be enabled.
8537 The operation couldn't locate a DC for the source domain.
8538 The source object must be a group or user.
8539 The source object's SID already exists in destination forest.
8540 The source and destination object must be of the same type.
8542 Schema information could not be included in the replication request.
8543 The replication operation could not be completed due to a schema incompatibility.
8544 The replication operation could not be completed due to a previous schema incompatibility.
8545 The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.
8546 The requested domain could not be deleted because there exist domain controllers that still host this domain.
8547 The requested operation can be performed only on a global catalog server.
8548 A local group can only be a member of other local groups in the same domain.
8549 Foreign security principals cannot be members of universal groups.
8550 The attribute is not allowed to be replicated to the GC because of security reasons.
8551 The checkpoint with the PDC could not be taken because there too many modifications being processed currently.
8552 The operation requires that source domain auditing be enabled.
8553 Security principal objects can only be created inside domain naming contexts.
8554 A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format.
8555 A Filter was passed that uses constructed attributes.
8556 The unicodePwd attribute value must be enclosed in double quotes.
8557 Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
8558 For security reasons, the operation must be run on the destination DC.
8559 For security reasons, the source DC must be NT4SP4 or greater.
8560 Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed.
8563 This version of Windows is too old to support the current directory forest behavior. You must upgrade the operating system on this server before it can become a domain controller in this forest.
8564 This version of Windows is too old to support the current domain behavior. You must upgrade the operating system on this server before it can become a domain controller in this domain.
8565 This version of Windows no longer supports the behavior version in use in this directory forest. You must advance the forest behavior version before this server can become a domain controller in the forest.
8566 This version of Windows no longer supports the behavior version in use in this domain. You must advance the domain behavior version before this server can become a domain controller in the domain.
8567 The version of Windows is incompatible with the behavior version of the domain or forest.
8568 The behavior version cannot be increased to the requested value because Domain Controllers still exist with versions lower than the requested value.
8569 The behavior version value cannot be increased while the domain is still in mixed domain mode. You must first change the domain to native mode before increasing the behavior version.
8570 The sort order requested is not supported.
8571 Found an object with a non unique name.
8572 The machine account was created pre-NT4. The account needs to be recreated.
8573 The database is out of version store.
8574 Unable to continue operation because multiple conflicting controls were used.
8575 Unable to find a valid security descriptor reference domain for this partition.
8576 Schema update failed: The link identifier is reserved.
8577 Schema update failed: There are no link identifiers available.
8578 A account group can not have a universal group as a member.
8579 Rename or move operations on naming context heads or read-only objects are not allowed.
8580 Move operations on objects in the schema naming context are not allowed.
8581 A system flag has been set on the object and does not allow the object to be moved or renamed.
8582 This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.
8583 Unable to resolve completely, a referral to another forest is generated.
8584 The requested action is not supported on standard server.
8585 Could not access a partition of the Active Directory located on a remote server. Make sure at least one server is running for the partition in question.
8586 The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properl
8587 The thread limit for this request was exceeded.
8588 The Global catalog server is not in the closest site.
8589 The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.
8590 The Directory Service failed to enter single user mode.
8591 The Directory Service cannot parse the script because of a syntax error.
8592 The Directory Service cannot process the script because of an error.
8593 The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress).
8594 The directory service binding must be renegotiated due to a change in the server extensions information.
8595 Operation not allowed on a disabled cross ref.
8596 Schema update failed: No values for msDS-IntId are available.
8597 Schema update failed: Duplicate msDS-INtId. Retry the operation.
8598 Schema deletion failed: attribute is used in rDNAttID.
8599 The directory service failed to authorize the request.
8600 The Directory Service cannot process the script because it is invalid.
8601 The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data.
9001 DNS server unable to interpret format.
9002 DNS server failure.
9003 DNS name does not exist.
9004 DNS request not supported by name server.
9005 DNS operation refused.
9006 DNS name that ought not exist, does exist.
9007 DNS RR set that ought not exist, does exist.
9008 DNS RR set that ought to exist, does not exist.
9009 DNS server not authoritative for zone.
9010 DNS name in update or prereq is not in zone.
9016 DNS signature failed to verify.
9017 DNS bad key.
9018 DNS signature validity expired.
9501 No records found for given DNS query.
9502 Bad DNS packet.
9503 No DNS packet.
9504 DNS error, check rcode.
9505 Unsecured DNS packet.
9551 Invalid DNS type.
9552 Invalid IP address.
9553 Invalid property.
9554 Try DNS operation again later.
9555 Record for given name and type is not unique.
9556 DNS name does not comply with RFC specifications.
9557 DNS name is a fully-qualified DNS name.
9558 DNS name is dotted (multi-label).
9559 DNS name is a single-part name.
9560 DNS name contains an invalid character.
9561 DNS name is entirely numeric.
9562 The operation requested is not permitted on a DNS root server.
9601 DNS zone does not exist.
9602 DNS zone information not available.
9603 Invalid operation for DNS zone.
9604 Invalid DNS zone configuration.
9605 DNS zone has no start of authority (SOA) record.
9606 DNS zone has no Name Server (NS) record.
9607 DNS zone is locked.
9608 DNS zone creation failed.
9609 DNS zone already exists.
9610 DNS automatic zone already exists.
9611 Invalid DNS zone type.
9612 Secondary DNS zone requires master IP address.
9613 DNS zone not secondary.
9614 Need secondary IP address.
9615 WINS initialization failed.
9616 Need WINS servers.
9617 NBTSTAT initialization call failed.
9618 Invalid delete of start of authority (SOA)
9619 A conditional forwarding zone already exists for that name.
9620 This zone must be configured with one or more master DNS server IP addresses.
9621 The operation cannot be performed because this zone is shutdown.
9651 Primary DNS zone requires datafile.
9652 Invalid datafile name for DNS zone.
9653 Failed to open datafile for DNS zone.
9654 Failed to write datafile for DNS zone.
9655 Failure while reading datafile for DNS zone.
9701 DNS record does not exist.
9702 DNS record format error.
9703 Node creation failure in DNS.
9704 Unknown DNS record type.
9705 DNS record timed out.
9706 Name not in DNS zone.
9707 CNAME loop detected.
9708 Node is a CNAME DNS record.
9709 A CNAME record already exists for given name.
9710 Record only at DNS zone root.
9711 DNS record already exists.
9712 Secondary DNS zone data error.
9713 Could not create DNS cache data.
9714 DNS name does not exist.
9715 Could not create pointer (PTR) record.
9716 DNS domain was undeleted.
9717 The directory service is unavailable.
9718 DNS zone already exists in the directory service.
9719 DNS server not creating or reading the boot file for the directory service integrated DNS zone.
9751 DNS AXFR (zone transfer) complete.
9752 DNS zone transfer failed.
9753 Added local WINS server.
9801 Secure update call needs to continue update request.
9851 TCP/IP network protocol not installed.
9852 No DNS servers configured for local system.
9901 The specified directory partition does not exist.
9902 The specified directory partition already exists.
9903 The DS is not enlisted in the specified directory partition.
9904 The DS is already enlisted in the specified directory partition.
10004 A blocking operation was interrupted by a call to WSACancelBlockingCall.
10009 The file handle supplied is not valid.
10013 An attempt was made to access a socket in a way forbidden by its access permissions.
10014 The system detected an invalid pointer address in attempting to use a pointer argument in a call.
10022 An invalid argument was supplied.
10024 Too many open sockets.
10035 A non-blocking socket operation could not be completed immediately.
10036 A blocking operation is currently executing.
10037 An operation was attempted on a non-blocking socket that already had an operation in progress.
10038 An operation was attempted on something that is not a socket.
10039 A required address was omitted from an operation on a socket.
10040 A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.
10041 A protocol was specified in the socket function call that does not support the semantics of the socket type requested.
10042 An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
10043 The requested protocol has not been configured into the system, or no implementation for it exists.
10044 The support for the specified socket type does not exist in this address family.
10045 The attempted operation is not supported for the type of object referenced.
10046 The protocol family has not been configured into the system or no implementation for it exists.
10047 An address incompatible with the requested protocol was used.
10048 Only one usage of each socket address (protocol/network address/port) is normally permitted.
10049 The requested address is not valid in its context.
10050 A socket operation encountered a dead network.
10051 A socket operation was attempted to an unreachable network.
10052 The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
10053 An established connection was aborted by the software in your host machine.
10054 An existing connection was forcibly closed by the remote host.
10055 An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
10056 A connect request was made on an already connected socket.
10057 A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
10058 A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.
10059 Too many references to some kernel object.
10060 A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10061 No connection could be made because the target machine actively refused it.
10062 Cannot translate name.
10063 Name component or name was too long.
10064 A socket operation failed because the destination host was down.
10065 A socket operation was attempted to an unreachable host.
10066 Cannot remove a directory that is not empty.
10067 A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.
10068 Ran out of quota.
10069 Ran out of disk quota.
10070 File handle reference is no longer available.
10071 Item is not available locally.
10091 WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
10092 The Windows Sockets version requested is not supported.
10093 Either the application has not called WSAStartup, or WSAStartup failed.
10101 Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.
10102 No more results can be returned by WSALookupServiceNext.
10103 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
10104 The procedure call table is invalid.
10105 The requested service provider is invalid.
10106 The requested service provider could not be loaded or initialized.
10107 A system call that should never fail has failed.
10108 No such service is known. The service cannot be found in the specified name space.
10109 The specified class was not found.
10110 No more results can be returned by WSALookupServiceNext.
10111 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
10112 A database query failed because it was actively refused.

Some Useful run commands. Check em out

noreply@blogger.com (kashif) — Thu, 08 Oct 2009 10:56:00 +0000

Sometimes launching an application or opening any directory, files or folders in your computer with Run command is far easier than doing the same with a series of mouse clicks. Many people prefer to use Run commands more than a series of mouse clicks.

Here are some useful Run commands:
notepad: notepad
wordpad: wordpad, write
Microsoft Word: winword
Microsoft Excel: excel
Microsoft Powerpoint: powerpnt
Photoshop: photoshop
Illustrator: illustrator
Clipboard Viewer : clipbrd
Command Prompt : cmd
Component Services : dcomcnfg
Computer Management : compmgmt.msc
Date and Time Properties : timedate.cpl
DDE Shares : ddeshare
Windows Update Launches : wupdmgr
Windows System Security Tool : syskey
Calculator : calc
Certificate Manager : certmgr.msc
Character Map : charmap
Check Disk Utility : chkdsk
Accessibility Controls : access.cpl
Add Hardware Wizard : hdwwiz.cpl
Add/Remove Programs : appwiz.cpl
Administrative Tools : control admintools
Automatic Updates : wuaucpl.cpl
Bluetooth Transfer Wizard : fsquirt
Microsoft Chat : winchat
Minesweeper Game : winmine
Mouse Properties : control mouse
Mouse Properties : main.cpl
Network Connections : control netconnections
Network Connections : ncpa.cpl
Network Setup Wizard : netsetup.cpl
On Screen Keyboard : osk
Opens AC3 Filter (If Installed) : ac3filter.cpl
Password Properties : password.cpl
Performance Monitor : perfmon.msc
Performance Monitor : perfmon
Phone and Modem Options : telephon.cpl
Power Configuration : powercfg.cpl
Printers and Faxes : control printers
Printers Folder : printers
Private Character Editor : eudcedit
Quicktime (If Installed) : QuickTime.cpl
Regional Settings : intl.cpl

Registry Editor : regedit
Registry Editor : regedit32
Remote Desktop : mstsc
Removable Storage : ntmsmgr.msc
Removable Storage Operator Requests : ntmsoprq.msc
Resultant Set of Policy (XP Prof) : rsop.msc
Scanners and Cameras : sticpl.cpl
Scheduled Tasks : control schedtasks
Security Center : wscui.cpl
Services : services.msc
Shared Folders : fsmgmt.msc
Shuts Down Windows : shutdown
Sounds and Audio : mmsys.cpl
Spider Solitare Card Game : spider
SQL Client Configuration : cliconfg
System Configuration Editor : sysedit
System Configuration Utility : msconfig
System File Checker Utility (Scan Immediately) : sfc /scannow
System File Checker Utility (Scan Once At Next Boot) : sfc/scanonce
System File Checker Utility (Scan On Every Boot) : sfc /scanboot
System File Checker Utility (Return to Default Setting) : sfc/revert
System File Checker Utility (Purge File Cache) : sfc /purgecache
System File Checker Utility (Set Cache Size to size x) : sfc /cachesize=x
Device Manager : devmgmt.msc
Fonts : control fonts
Fonts Folder : fonts
Free Cell Card Game : freecell
Game Controllers : joy.cpl
Group Policy Editor (XP Prof) : gpedit.msc
Hearts Card Game : mshearts
Iexpress Wizard : iexpress
Indexing Service : ciadv.msc
Internet Properties : inetcpl.cpl
IP Configuration (Display Connection Configuration) : ipconfig /all
IP Configuration (Display DNS Cache Contents) : ipconfig/displaydns
IP Configuration (Delete DNS Cache Contents) : ipconfig /flushdns
IP Configuration (Release All Connections) : ipconfig /release
IP Configuration (Renew All Connections) : ipconfig /renew
IP Configuration (Refreshes DHCP & Re-Registers DNS) : ipconfig/registerdns
IP Configuration (Display DHCP Class ID) : ipconfig /showclassid
IP Configuration (Modifies DHCP Class ID) : ipconfig /setclassid
Java Control Panel (If Installed) : jpicpl32.cpl
Java Control Panel (If Installed) : javaws
Keyboard Properties : control keyboard
Local Security Settings : secpol.msc
Local Users and Groups : lusrmgr.msc
Windows XP Tour Wizard : tourstart