Alpona Graphics

OIL EXPLORATION the new trend

2011-06-09T08:28:00.000-07:00

OIL EXPLORATION. In the early days of petroleum prospecting in Texas most oil finds were the result of digging or drilling near known oil and gas seeps, as Lyne T. Barret did in 1866 at Oil Spring in Nacogdoches County, or of accidental finds while drilling for water, as with George Dullnig's 1886 strike in Bexar County or the discovery of oil in Corsicana in 1894. Because of abundant seeps, guesswork and good luck were sufficient for finding oil. Most prominent salines and salt domes had been recorded by the 1890 Geological Survey of Texas but did not necessarily become the focal point of oil exploration due to numerous unexploited seeps. Amateurs in geology, such as Pattillo Higgins, used geological hunches and knowledge of existing seeps to promote drilling for oil at Spindletop in 1901. At Batson in 1903, the Paraffin Oil Company, another group of amateurs, founded their venture on petroleum residue in soil samples collected from near a gas spring. This was the first time that "paraffin dirt" was used in prospecting for oil. Despite these finds, oil companies generally held the use of geology in low regard prior to the 1920s, when geophysical methods of exploration that enhanced the oil prospector's knowledge of subterranean strata began demonstrating an advantage for finding oil. Tools used by oil and gas explorers were fairly basic and depended on fundamental variables in the earth's physical condition: gravity change, magnetic field change, time change, and electrical resistance.
The torsion balance was one of the earliest geophysical instruments used in the exploration for salt domes along the Texas Gulf Coast. The most common torsion balance employed in the early hunt for oil in Texas was designed by Baron von Eoetvoes in Hungary and was not available until after World War I for commercial use. Eoetvoes's torsion balance and instruments like it made use of the earth's gravitational field and the way the field varied according to differences in mass distribution near the earth's surface. Because the density of rocks varies, the gravitational force they exert necessarily varies. If very light rocks are found close to the surface, the gravitational force they exert will be less than those of very heavy rocks. With this in mind, geophysicists attempted to locate salt domes, which would be associated with minimum gravity, by using the torsion balance instrument. The first salt dome and oil-bearing structure that was discovered by any geophysical means was the Nash dome in Brazoria County in the spring of 1924, located with the use of the torsion balance. The pendulum method, another variation of the gravity method, also contributed to the discovery of oil in Texas. This method relied on the period of a pendulum's oscillation adjusted by variations in gravity due to changes in altitude and latitude. E. A. Eckhardt and R. D. Wycoff designed a new pendulum instrument in 1930 that led to the discovery of the Cleveland oilfield in Liberty County, the Tomball gravity anomaly, and a clear picture of the Conroe dome. The pendulum method was superseded by the gravity meter. Advances in gravity instrument technology afforded geophysicists better equipment with which to make more accurate determinations. The most common gravitational instrument in use today is the gravity meter or gravimeter, which measures variations in the earth's gravitational field by the gravitational pull on a mass balanced against some form of elastic force. Gravimeters were built as early as 1899 but did not prove effective until the mid-1930s when O. H. Truman used one to find the Tom O'Connor field in South Texas for the Humble Oil and Refining Company in 1934. Ship-borne gravity meters played a valuable role in marine exploration, and air-borne gravity meters received attention in research.
A second method of exploration is the Magnetic method. Most oil occurs in sedimentary rocks that are nonmagnetic. Igneous and metamorphic rock rarely contain oil and are highly magnetized. By conducting a magnetic survey over a given area, a prospector can determine where oil-bearing sedimentary rock is more likely to be found. Two types of magnetic instruments are used to measure the slight difference in magnetism in rocks, the field balance and the airborne magnetometer. The field balance is used on the earth's surface to measure magnetism in specific locations. The airborne magnetometer is used to measure the magnitude of the earth's total magnetic field over a large area. A magnetometer was used to define the serpentine plug on which the Yoast field in Bastrop County was discovered in 1927. A third method of exploration is the seismic method. The central physical property upon which seismic prospecting is established is the variation in speed of the transmission of elastic earth waves or sound waves through different geological structures measured by time. There are two principle seismic methods: refraction and reflection. Refraction prospecting consists of elastic earth waves, initiated by some concussive force, traveling down to a dense or high velocity bed, then being carried along that bed until they are rerefracted up to seismic detector locations on the surface some distance from the shot point. What is recorded is the time required for the sound wave to reach each detector location from the shot point. The speed of transmission of the waves through different geological structures is proportional to the density or compactness of the formation. Unconsolidated formations such as sands and shales transmit waves with a low velocity, weak sandstones and limestones with higher speeds, and massive crystalline rocks such as limestones, rock salt, schists, and various igneous rocks with very high speeds. The refraction method aided petroleum explorers in locating salt domes that transmitted elastic earth waves at high rates of speed. During World War I Ludger Mintrop, a German scientist, utilized a portable seismograph that he invented in order to locate Allied artillery firing positions. By setting up three seismographs opposite Allied guns, triangulations could be made from the instruments to the gun's firing position with adjustments in calculations for the variation of sound waves traveling through different types of geological formations. After the war Mintrop reversed the process. By measuring the distance from an explosion to the seismograph, Mintrop found that he could estimate subsurface geological formations based on the time it took the elastic earth wave to travel from the shot point, through a formation, to seismic detectors located about two miles distant. Variations in time were used to confirm the existence of salt domes that transmitted the elastic earth waves at higher rates of speed. On December 7, 1919, Mintrop filed for a German patent on his refraction profiling seismic method, but the patent was not confirmed until 1927 after Mintrop had already received a United States patent for it. Mintrop's instrument prompted the founding in April 1921 of Seismos Gesellschaft, which did seismic prospecting in East Texas and the Texas Gulf Coast from 1923 to 1925. Because of difficulty in determining breaks in the velocity of sound waves between different layers along the Gulf Coast, it was difficult to determine the depth of the layers. The maximum effective depth of refraction surveying by Seismos's crews was 2,500 feet. A fan pattern of deploying seismographs from the shot point was adopted and ultimately responsible for much of the success of the refraction method in finding salt domes. A Mintrop crew, employed by Gulf Oil, was responsible for the first seismic discovery of a salt dome along the Texas coast using the refraction method at the Orchard dome in Fort Bend County in 1924. This find may very well have been the first seismic discovery of a salt dome that produced oil in the world. Seismos dominated commercial work with the refraction method through 1925. Companies who were most active in refraction shooting in and around Texas from 1924–29 were Gulf, Humble, Roxana (Shell), and Pure and Louisiana Land and Exploration Company. Seismos and the Geophysical Research Corporation did most of the work for these companies except Humble and Shell. Other consulting companies included Petty Geophysical Engineering Company, Burton, McCollum and Frank Rieber. Advances in research during this time led to the development and commercial implementation of another seismic method. The reflection method of seismic exploration is based on the echo of sound waves off layers of varying density rock, which are reflected at a high angle back to the surface. The Geophysical Research Corporation began experimenting with the seismic reflection method in 1926 and by 1929 had seismic crews employing the method commercially throughout West Texas and the Gulf Coast. In 1931 Petty Geophysical Engineering Company of San Antonio invented and implemented the reverse profile method of reflection shooting that became the standard method of shooting throughout the industry. Now most seismologists, instead of using dynamite to make shock waves, use a machine called a thumper to produce elastic shock waves.
A final method of exploration is the study of stratigraphy. Stratigraphic exploration consists of establishing correlations between wells, matching fossils, strata, rock hardness or softness, and electrical and radioactivity data to determine the origin, composition, distribution, and succession of rock strata. Sample logs, driller's logs, time logs, electrical logs, radioactivity logs, and acoustic logs help geologists predict where oil bearing strata occur. Sample logs, compiled from well cuttings and cores, are used to identify key beds and lithologic sequences. A core is a narrow column of rock that is taken from the top to the bottom of a well and shows rock in sequential order as it appears in the ground. Core samples also provide information on porosity, permeability, and saturation of rock in the well. Cuttings are not a continuous record like core samples, but provide a means for identifying sections within larger thick layers through fossil and mineral deposits. The driller's log provides basic information to the stratigrapher concerning depth, type of rock, density, fluids, and other miscellaneous data. The driller's log keeps track of the time required to drill through various strata and the recognition of key beds he drills through. This data is correlated with other information to enhance the chance of finding oil. Early electrical methods of exploration in the 1920s tested electrical resistivity and electro-magnetic potential but proved to be more successful at locating metallic ores than oil and gas. Oil and gas have conductivity properties that differ from water, which conducts electricity more readily. Occurrences of oil and gas can be located by this difference in resistance. The most useful application of electric testing has been in the development and impact of well logging. Schlumberger electric well logging is now standard in the industry. These logs record the conductivity of interstitial water in rock, the movement of drilling mud into porous strata, and the movement of formation water into the well bore. Radioactivity Logs, which record both gamma-ray and neutron values, have been in use productively since 1941. Because radioactivity can be measured with precision it can be used to identify different layers within beds. Radioactivity logs give an indication of the type of rocks and fluids contained in those rocks. Acoustic or sonic logs are used to measure the porosity of a formation. This tool measures the speed at which an acoustic or sonic impulse is carried through a specified length of rock. The speed of sound through the rock gives an indication of the porosity and can be helpful in locating reservoirs. Maps, including contour, isopach, cross sections, and three dimensional computer images, also aid the petroleum explorer in locating oil and gas. Contour maps give details of subsurface structural features enabling geologists to visualize three dimensional structures. Contour maps include information about porosity, permeability, and structural arrangements such as faults, pinch-outs, salt domes, and old shorelines. Isopatch maps show variations in thickness of a given subsurface formation and are used in calculating the size of reservoirs and secondary recovery operations. A cross section map is a diagram of an imaginary vertical cut along a straight line that reveals subterranean features of a given area much like looking at a road cut. Three dimensional computer maps construct images of subterranean strata as deep as thirty miles.

BIBLIOGRAPHY:

Geophysical Case Histories (2 vols., Tulsa, Oklahoma: Society of Exploration Geophysicists, 1948, 1956). Mildred Gerding, ed., Fundamentals of Petroleum (Petroleum Extension Service, University of Texas at Austin, 1979). Edgar Wesley Owen, Trek of the Oil Finders: A History of Exploration for Petroleum (Tulsa: American Association for Petroleum Geologists, 1975). Olive Scott Petty, Seismic Reflections: Recollections of the Formative Years of the Geophysical Exploration Industry (Houston: Geosource, 1976). Charles Albert Warner, Texas Oil and Gas Since 1543 (Houston: Gulf, 1939).

Megan Fox 'had a hard time accepting' sex symbol status from 'Transformers'

2011-06-04T09:12:00.000-07:00

Megan Fox has often been referred to as the hottest girl in the world. But according to Shia LaBeouf, even her sex symbol status could not have prepared her for "Transformers" director Michael Bay's unique style of filmmaking.

"Megan developed this Spice Girl strength, this woman-empowerment [stuff] that made her feel awkward about her involvement with Michael, who some people think is a very lascivious filmmaker, the way he films women," LaBeouf, 24, told the Los Angeles Times.

"Mike films women in a way that appeals to a 16-year-old sexuality. It's summer. It's Michael's style. And I think [Fox] never got comfortable with it," he continued. "This is a girl who was taken from complete obscurity and placed in a sex-driven role in front of the whole world and told she was the sexiest woman in America. And she had a hard time accepting it."

As a result, Fox, who played Mikaela Banes in the first two installments of the "Transformers" franchise, was replaced by 24-year-old model Rosie Huntington-Whiteley.
Original Story

Sony Probing claim hackers stole user data

2011-06-03T11:38:00.000-07:00

Sony has been hit by a second massive data breach, hackers claim, another potential embarrassment for a company that is struggling to restore its image following the loss of millions of credit card numbers through its PlayStation Network.
The hackers, who call themselves LulzSec, said they pulled off what they described as an elementary attack to highlight Sony's "disgraceful" security.
"Every bit of data we took wasn't encrypted. Sony stored over 1,000,000 passwords of its customers in plaintext, which means it's just a matter of taking it," LulzSec said in a statement. "They were asking for it."
Sony Pictures, a subsidiary of Sony Corporation of America, said Thursday it is aware of the LulzSec statement.
"We are looking into these claims," said Jim Kennedy, executive vice president of global communications for Sony Pictures Entertainment.

The data — which includes passwords, email addresses, phone numbers, home addresses, dates of birth — was posted to the LulzSec website and appeared to be at least partially genuine.
The Associated Press called a number listed by LulzSec as belonging to 84-year-old Mary Tanning, a resident of Minnesota. Tanning picked up the phone, and confirmed the rest of the details listed by LulzSec — including her password, which she said she was changing.
"I don't panic," she told the AP, explaining that she was very seldom online and wasn't wealthy. "There's nothing that they can pick out of me," she joked.
Several other people contacted by the AP confirmed that their passwords had been published online. Many were angry and distressed.
"If this is so, I'm very upset," said Elizabeth Smith, from Tucson, Arizona. "I'm very disappointed that Sony would not protect things like that."
Like several others contacted by the AP, Smith said she often entered online sweepstakes — including ones she described as being affiliated with Sony. Neither she nor anyone else reached over the phone said they'd heard from the company about the apparent breach.
Sony Corp. is already is facing questions over why it did not inform consumers more quickly after a massive cyber-attack in April targeted credit card information through its PlayStation Network and Sony Online Entertainment network, compromising more than 100 million user accounts.
At the time, experts warned the attack emboldened hackers and made them more willing to pursue sensitive information.
It is unclear who the members of LulzSec are, or where they're based. The group didn't immediately reply to emails sent to their website's administrative and technical accounts or to a Twitter message posted to the Web late Thursday.
The group's website -- which has a pared-down, 1990s look -- was only registered on Wednesday, according to an Internet records search. The site's registrant is listed as being based in the Bahamas.
LulzSec recently claimed responsibility for hacking the website of the PBS television network to post a fake story in protest of a recent "Frontline" investigative news program on WikiLeaks.
For the past two days, the group has been mocking Sony via Twitter and alluding to a hacking operation.
Posts on the microblogging site through an account linked to the group at times chastise "silly Sony" and "You Sony morons," saying "everything we have will be published in multiple ways to ensure maximum embarrassment and exposure for (Sony) and their security flaws."
Credit for this article

Reserve web address by registering domain name is important.

2011-04-23T09:24:00.000-07:00

Many people who do business online, are often found spending huge amounts simply to register a web address and reserve domain name of their choice. The question that appears is that is it so important to reserve domain names than spending on the SEO and traffic of the website?
Reserve Domain Name: Why is it Important
Sometimes, it becomes important to make your brand name appear on the internet exactly as you have it in the market. e.g., if Reebok makes an Internet appearance with a web address as goodshoes.org, it will be very difficult for a potential customer to get accustomed to Reebok on the internet. This is where one feels the need to reserve domain name for the online promotion of an existing business.
What is a Web Address
A web address in internet friendly terms may be referred as a domain name. A domain name is the address that has to be typed into the address bar of the web browser to reach a particular website. e.g., to open Suite101 in your web browser, you need to type in the domain name 'suite101.com' in the address bar.

As can be seen, there are two parts of a domain name separated by a period. The latter part or the '.com' in the above example reflects what is the type of the website. A .com reflects a commercial website, .info reflects an informative website, .biz reflects a business website and .org reflects a website representing an organization. This part of the domain name is called the top level domain name.
The other part of the domain name is the actual web address that we have been talking about. It is the name that has to be registered. This part is called the second level domain name and in the example above, the second level domain name is suite101.
How to Choose a Good Web Address
Choosing a web address is easy if there already is a business doing well with a brand name of its own. The first part of choosing a web address is deciding the type of the website. Choose a top level domain name according to the type of the website. A purely business website may loose a lot of significance if it has .info as the top level domain name.
The second part is difficult. One may choose the best possible name as the second level domain name, only to realize that it has already been taken up. In such case, try to stick as close to the name of your choice. This is where it becomes important to reserve a domain name matching the business you are promoting.
To check whether a domain name has already been registered or not, type the name in the browser and wait for the page to be loaded. if a website loads into the browser, the name has already been registered but if an error comes such as 'server not responding' or 'page not found', the name may still be available. The next step is to find a domain registrar.
How to Register Web Address With a Domain Registrar
This is the final step that needs to be done to reserve domain name. Once ready with the web address of choice, go to any domain name registrar that is accredited by ICANN (Internet Corporation for Assigned Names and Numbers). Most registrars give the option of searching whether a domain name is available for purchase or not. Once again check and confirm and once it is clear that the name is available, pay the amount and reserve the domain name . Most registrars take $10 to $30 for domain name registrations. Again, the cost may vary according to the importance of the selected domain name.

How to fail making money at online

2011-01-07T10:30:00.000-08:00

Did the title of this post make you look twice? I hope so…

For every successful online entrepreneur, many have completely failed. In order to become one of those success stories you need to understand why it happens.

A good way to do that is by taking a look at how people fail miserably at making money online. It may seem like a backward approach, but if we look at what you shouldn’t do, then you will be headed in the right direction toward what you should do to succeed in your online venture.

So, in this post, I will take a look at what you should avoid when starting up an online business. This guide will be a great reference to reflect back upon as you journey forward with your online moneymaking adventure. If you always use this as a reference, then you will avoid making these terrible mistakes that will eventually lead to bad endings for businesspersons.

Trying To Get Rich Quick

You can’t jump into any online business venture with the idea that you will wake up the next day a millionaire. Regardless if you’ve created the most innovative information product out there, or your blog is the blog that kills all other blogs, you can’t expect that you will instantly gain fame and fortune.

Like anything worth pursuing, making money online comes with a lot of trial and error. You have to be willing to fail (and fail often) in order to achieve true success.

Don’t lose hope if you try something out and it doesn’t work. I guarantee most, if not all, of the successful online business owners had a lot of “firsts” flop. It’s all part of the learning process.

Come into your new business with the mindset that you will succeed, but it’s going to take some time. You will invest tons of hours, lots of sweat, and even a few tears; but it will all come together for you.

Forgetting You’re Running a Business

Sadly, this happens more often than not. Many people pursuing online businesses forget to treat it like a business. This is especially prevalent among bloggers. Once you start treating your venture like a business, you will start to see more success.
Running a blog, website, or any other online business requires the following:

Time: Yes, you will read tons of literature out there with people claiming they make thousands of dollars by only working 4 hours a week.

This may very well be true, but it didn’t start out that way. You have to be willing to put in lots of hours if you want to get to that level. When you initially start out, you will likely put in a full 40 hours a week.

Some people literally work 100 hours a week in those first couple of months. It all depends on how fast you want to make things happen.

Money: Okay, so starting an online business doesn’t require as much as it would to start something brick and mortar. But, you still need to be willing to put up some cash.

You will need at the least a web hosting service, web design, a domain name, and an emailing service. You can get all of these things for a few hundred dollars, so you aren’t going to break the bank, hopefully.

Labor: You can’t just sit around waiting for something big to happen. You are going to have to put forth the effort and create your own success. Take action and go after what you want. That is the only way you will achieve your goals.

Learning The Wrong Way

Many people fail because they go out there and soak up any information they can get; and it ends up being the wrong information. If you go out and survey in the streets, you will get all sorts of information thrown at you.

It’s important to really learn the basics behind your business. If you are a blogger, read what the foremost authorities on blogging have written. Don’t go ask your son’s best friend who runs a blog on World of Warcraft.

If you want to sell your crafts online, find a community of those who successfully do so. The biggest advice I can give you is learn from the best in your niche. Sure, there are tons of experts out there with great information, but if it has nothing to do with your area, then it is likely only going to confuse you.

Learn your niche, get to know your market, and find the right community to help you build your business. Shut out all of the information that doesn’t pertain to you. The more garbage you ingest, the more likely you are to just give up.

Waiting For Things To Happen

I expressed this earlier, but I think it is so important that I need to stress it again. Never sit around and wait for things to happen for you. Lazy people rarely ever succeed.

Take action and spend at least 5 hours a day learning your new business. Study as much as you can about your market and niche. Write content everyday. Come up with new product ideas weekly.

It is important to constantly evolve your business if you want to make money online. The Internet is growing faster than we can keep up. If you miss a beat, you may kill your business. Stick with it, and success will come your way.

Did you enjoy this post? If so, please click the “like” icon below, or even better leave a comment about what you liked about it.

And if you want to read lots more, we’ve got a huge bundle of reports waiting for you if you let us send them to you, just sign up over to your right, where it says “Download 34 Free IM Reports”.

How to Embeded Google Adsense code anywhere in your blogger

2010-12-11T00:16:00.000-08:00

Have you ever tried to insert javascript ad code directly into your Blogger Template and it just wouldn’t work? Ok, everyone in the room can put their hands down now. This has always been a huge problem for blog authors using Google Blogger looking to monetize their site since almost all ad code contains javascript.
So why is this so darn difficult to do? The problem in the past was that Blogger users wanted more control over where and how frequently their block of ad code (usually AdSense) appeared. The Blogger Team listened to their customers and created an easy to use feature that allows you to setup AdSense in your individual posts with a simple checkbox selection.
Typical Blogger Error Masage :
That’s great for most people but the places where you can insert widgets are rather limited and not as flexible as you’d like. So what if you want to put AdSense, AdBrite, Chitika or any other sort of javascript-related code elsewhere on your blog without having to use a widget? The answer in the past would be, “It’s just not easy”.
You would paste the Google AdSense, AdBrite, Chitika or any other javascript ad code into your xml Blogger template only do get an error like:
“Your template could not be parsed as it is not well-formed. Please make sure all XML elements are closed properly. XML error message: The processing instruction target matching “[xX][mM][lL]” is not allowed.”
or another really cryptic error message like:
“Your template could not be parsed as it is not well-formed. Please make sure all XML elements are closed properly. XML error message: The content of elements must consist of well-formed character data or markup.“.
In fact, more recently the Blogger xml parser seems to allow javascript code in your template without displaying an error message at all. You think all is well only to discover when you view your blog that nothing actually gets displayed

Full Story : Click Here
Blogger Adsense Code Converter : Click Here

Why you must own a Blog for your business

2010-10-29T13:00:00.000-07:00

A Blog is basically an online journal wherein you can digitally pen down your thoughts, ideas, opinions and practically anything that you want people to read. Blogs come in different styles, formats, and settings, depending on the preference of the user. Many blogging sites, offer built in features such as hyperlink, straight texts, pictures etc. Some blogging sites, even allow you to put video and mp3′s on your Blogs.
Instead of writing texts, some Bloggers choose to make their Blogs more audio friendly, by using spoken word entries. This is called audio blogging.
Basically a Blog contains these features:
*Title – which allows you to label your post
*Body – this is the content of your post
*Trackback – other sites can be linked back to your blog
*Permanent link – every article that you write has a URL
*Comments – this allow readers to post comments on your blog.

One of the advantages of Blogging, is that it is made of only a few templates. Unlike, other websites that is made up of numerous individual pages. This make it easier for Blog users to create new pages, because it already has a fix setting that include: slots for title, body of the post, category, etc.
This is especially useful for first time users, since they can start blogging right away. They can choose from a number of templates that blogging websites provide.
Anyone who wants to start a Blog can do so by becoming a member of a blogging website of their choice. Once they’ve become members, they automatically become a part of that particular blogging community. They can browse through other Bloggers pages, and link them back to their own blogs. They can also make comments on other members’ Blogs.
Blogging is not just limited to personal usage. There are a lot of Blogs that follow a theme such as: sports, politics, philosophy, social commentary, etc. These Blogs espouse on their specific themes. This way blogging becomes a medium in which people can share their knowledge and opinions about a variety of themes and topics.
Some Bloggers even use their Blogs as a means to advertise. Some authors advertise their books on their Blogs. While other Bloggers, use their Blogs to shed light to currents issues, events, news and catastrophes.
Nowadays in education, blogs also play an important part. Professors use blogging to document the lessons that they have discussed and taught. This way, students who who have missed classes, can easily catch up with their assignments.
A lot of entrepreneurs benefit from blogging by promoting their businesses on their Blogs, with millions and millions of people logging onto the net everyday, blogging has become a lucrative move. Some Bloggers who run online businesses promote their merchandise online. While others profit through advertisement.
But by far, the most popular Blog type is the one that takes the form of a personal journal. This is the kind that is usually used by first time Bloggers. Individuals who want to document the daily struggle of their everyday lives, poems, rants, opinions, find that blogging offers them a medium in which to express themselves.
Bloggers usually communicate within themselves. This is one of the appeals of blogging. It creates a community of people sharing their ideas, thoughts, and comments with each other.
Blogs varying in topics, themes, and set-ups, can be found in Blog directories. First time users who want to get an idea of what the blogging world is all about can browse through a number of Blogs using these directories. This way they’d get an idea of what these blogging communities are like.
Blogging is popular all over the world. Blog is short for the term weblog. There are no rules when it comes to blogging. Bloggers have the freedom to express themselves how ever way they want, and the best thing about blogging, is that most blogging sites are free.
There are numerous blogging websites to choose from in the net. This give first time users the option of joining a blogging community that appeals to their interests.
Just search any blogging directory and you’d get a listing of a lot of blogging sites that are available on the net. It’s easy to search a blogging directory, because it is organized according to category. This way you would get exactly what you are after. Blogging is really for everyone. It is fun, simple and easy.

Making Money Through Affiliate Program Software

2010-10-29T12:44:00.000-07:00

Fast becoming one of the largest ways to make money online, affiliate programs have become quite the craze all over the world, spawning dozens of affiliate software programs to help you market your product or software.
If you are the owner of an online internet-based business, you will probably be aware of affiliate program software. In fact, you are likely to have heard about affiliate program software even if you are not an ardent Internet user. Affiliate marketing helps both the merchant as well as the affiliate grow together. The affiliate provides the merchant with sales links and leads, along with more affiliates, making the sales network grow over time. A majority of merchants use affiliate program software to help them manage their affiliate programs efficiently.
Of course, the Internet has its own share of scams and bogus affiliate deals, there are still a large number of successful affiliate programs offering you the chance to make money online using their affiliate program software. Whenever you come across a good affiliate program software, ensure that you have gone through the finer details and marketing plan before you decide to invest in such an affiliate program.

Affiliate programs also work when a website ties up with another high-traffic site (generally) to help each other market and/or sell each other’s products using banners and links that are placed on their respective websites. Essentially, a website endorses a merchant’s site and does their advertising as well. They charge for the advertising, of course, but these links generate sales commissions for the affiliate from the sales they can generate for the merchant from these activities. Affiliate program software helps track all this automatically and ensures that you know what commissions you are receiving or paying out (as the case may be), allowing you to manage your affiliates or programs properly. So, anyone who has one or more high-traffic websites stands to benefit from this opportunity.
It works well for the merchant too. Being associated with high-traffic sites allows your products and services to be made visible by millions of people, and helps you generate traffic to your site and more sales as well.
Affiliate program software is fast becoming a necessary tool to track your affiliate sales and commissions efficiently. They give you statistics to help you to know what your current affiliate position is.