GulmiSoft

Folder Options Missing

2012-01-03T01:40:00.000-08:00

Many of us sometimes find the folder options missing in windows explorer.

Here's the solution-->

Open Run and then type "gpedit.msc".

Now goto User Configuration > Administrative templates > Windows Component > Windows Explorer.

Click on Windows Explorer you will find the 3rd option on the right side of screen "Removes the Folder Option menu item from the Tools menu"

Just check it, if it is not configured then change it to enable by double clicking on it and after applying again set it to not configured.

How Linux boots

2011-09-06T20:25:00.000-07:00

How Linux boots

As it turns out, there isn't much to the boot process:

1. A boot loader finds the kernel image on the disk, loads it into memory, and starts it.

2. The kernel initializes the devices and its drivers.

3. The kernel mounts the root filesystem.

4. The kernel starts a program called init.

5. init sets the rest of the processes in motion.

6. The last processes that init starts as part of the boot sequence allow you to log in.

Identifying each stage of the boot process is invaluable in fixing boot problems and understanding the system as a whole. To start, zero in on the boot loader, which is the initial screen or prompt you get after the computer does its power-on self-test, asking which operating system to run. After you make a choice, the boot loader runs the Linux kernel, handing control of the system to the kernel.

There is a detailed discussion of the kernel elsewhere in this book from which this article is excerpted. This article covers the kernel initialization stage, the stage when the kernel prints a bunch of messages about the hardware present on the system. The kernel starts init just after it displays a message proclaiming that the kernel has mounted the root filesystem:

VFS: Mounted root (ext2 filesystem) readonly.

Soon after, you will see a message about init starting, followed by system service startup messages, and finally you get a login prompt of some sort.

NOTE On Red Hat Linux, the init note is especially obvious, because it "welcomes" you to "Red Hat Linux." All messages thereafter show success or failure in brackets at the right-hand side of the screen.

Most of this chapter deals with init, because it is the part of the boot sequence where you have the most control.

init

There is nothing special about init. It is a program just like any other on the Linux system, and you'll find it in /sbin along with other system binaries. The main purpose of init is to start and stop other programs in a particular sequence. All you have to know is how this sequence works.

There are a few different variations, but most Linux distributions use the System V style discussed here. Some distributions use a simpler version that resembles the BSD init, but you are unlikely to encounter this.

Runlevels

At any given time on a Linux system, a certain base set of processes is running. This state of the machine is called its runlevel, and it is denoted with a number from 0 through 6. The system spends most of its time in a single runlevel. However, when you shut the machine down, init switches to a different runlevel in order to terminate the system services in an orderly fashion and to tell the kernel to stop. Yet another runlevel is for single-user mode, discussed later.

The easiest way to get a handle on runlevels is to examine the init configuration file, /etc/inittab. Look for a line like the following:

id:5:initdefault:

This line means that the default runlevel on the system is 5. All lines in the inittab file take this form, with four fields separated by colons occurring in the following order:

# A unique identifier (a short string, such as id in the preceding example)

# The applicable runlevel number(s)

# The action that init should take (in the preceding example, the action is to set the default runlevel to 5)

# A command to execute (optional)

There is no command to execute in the preceding initdefault example because a command doesn't make sense in the context of setting the default runlevel. Look a little further down in inittab, until you see a line like this:

l5:5:wait:/etc/rc.d/rc 5

This line triggers most of the system configuration and services through the rc*.d and init.d directories. You can see that init is set to execute a command called /etc/rc.d/rc 5 when in runlevel 5. The wait action tells when and how init runs the command: run rc 5 once when entering runlevel 5, and then wait for this command to finish before doing anything else.

There are several different actions in addition to initdefault and wait, especially pertaining to power management, and the inittab(5) manual page tells you all about them. The ones that you're most likely to encounter are explained in the following sections.

respawn

The respawn action causes init to run the command that follows, and if the command finishes executing, to run it again. You're likely to see something similar to this line in your inittab file:

1:2345:respawn:/sbin/mingetty tty1

The getty programs provide login prompts. The preceding line is for the first virtual console (/dev/tty1), the one you see when you press ALT-F1 or CONTROL-ALT-F1. The respawn action brings the login prompt back after you log out.

ctrlaltdel

The ctrlaltdel action controls what the system does when you press CONTROL-ALT-DELETE on a virtual console. On most systems, this is some sort of reboot command using the shutdown command.

sysinit

The sysinit action is the very first thing that init should run when it starts up, before entering any runlevels.

How processes in runlevels start

You are now ready to learn how init starts the system services, just before it lets you log in. Recall this inittab line from earlier:

l5:5:wait:/etc/rc.d/rc 5

This small line triggers many other programs. rc stands for run commands, and you will hear people refer to the commands as scripts, programs, or services. So, where are these commands, anyway?

For runlevel 5, in this example, the commands are probably either in /etc/rc.d/rc5.d or /etc/rc5.d. Runlevel 1 uses rc1.d, runlevel 2 uses rc2.d, and so on. You might find the following items in the rc5.d directory:

S10sysklogd S20ppp S99gpm

S12kerneld S25netstd_nfs S99httpd

S15netstd_init S30netstd_misc S99rmnologin

S18netbase S45pcmcia S99sshd

S20acct S89atd

S20logoutd S89cron

The rc 5 command starts programs in this runlevel directory by running the following commands:

S10sysklogd start

S12kerneld start

S15netstd_init start

S18netbase start

...

S99sshd start

Notice the start argument in each command. The S in a command name means that the command should run in start mode, and the number (00 through 99) determines where in the sequence rc starts the command.

The rc*.d commands are usually shell scripts that start programs in /sbin or /usr/sbin. Normally, you can figure out what one of the commands actually does by looking at the script with less or another pager program.

You can start one of these services by hand. For example, if you want to start the httpd Web server program manually, run S99httpd start. Similarly, if you ever need to kill one of the services when the machine is on, you can run the command in the rc*.d directory with the stop argument (S99httpd stop, for instance).

Some rc*.d directories contain commands that start with K (for "kill," or stop mode). In this case, rc runs the command with the stop argument instead of start. You are most likely to encounter K commands in runlevels that shut the system down.

Adding and removing services

If you want to add, delete, or modify services in the rc*.d directories, you need to take a closer look at the files inside. A long listing reveals a structure like this:

lrwxrwxrwx . . . S10sysklogd -> ../init.d/sysklogd

lrwxrwxrwx . . . S12kerneld -> ../init.d/kerneld

lrwxrwxrwx . . . S15netstd_init -> ../init.d/netstd_init

lrwxrwxrwx . . . S18netbase -> ../init.d/netbase

...

The commands in an rc*.d directory are actually symbolic links to files in an init.d directory, usually in /etc or /etc/rc.d. Linux distributions contain these links so that they can use the same startup scripts for all runlevels. This convention is by no means a requirement, but it often makes organization a little easier.

To prevent one of the commands in the init.d directory from running in a particular runlevel, you might think of removing the symbolic link in the appropriate rc*.d directory. This does work, but if you make a mistake and ever need to put the link back in place, you might have trouble remembering the exact name of the link. Therefore, you shouldn't remove links in the rc*.d directories, but rather, add an underscore (_) to the beginning of the link name like this:

mv S99httpd _S99httpd

At boot time, rc ignores _S99httpd because it doesn't start with S or K. Furthermore, the original name is still obvious, and you have quick access to the command if you're in a pinch and need to start it by hand.

To add a service, you must create a script like the others in the init.d directory and then make a symbolic link in the correct rc*.d directory. The easiest way to write a script is to examine the scripts already in init.d, make a copy of one that you understand, and modify the copy.

When adding a service, make sure that you choose an appropriate place in the boot sequence to start the service. If the service starts too soon, it may not work, due to a dependency on some other service. For non-essential services, most systems administrators prefer numbers in the 90s, after most of the services that came with the system.

Linux distributions usually come with a command to enable and disable services in the rc*.d directories. For example, in Debian, the command is update-rc.d, and in Red Hat Linux, the command is chkconfig. Graphical user interfaces are also available. Using these programs helps keep the startup directories consistent and helps with upgrades.

HINT: One of the most common Linux installation problems is an improperly configured XFree86 server that flicks on and off, making the system unusable on console. To stop this behavior, boot into single-user mode and alter your runlevel or runlevel services. Look for something containing xdm, gdm, or kdm in your rc*.d directories, or your /etc/inittab.

Controlling init

Occasionally, you need to give init a little kick to tell it to switch runlevels, to re-read the inittab file, or just to shut down the system. Because init is always the first process on a system, its process ID is always 1.

You can control init with telinit. For example, if you want to switch to runlevel 3, use this command:

telinit 3

When switching runlevels, init tries to kill off any processes that aren't in the inittab file for the new runlevel. Therefore, you should be careful about changing runlevels.

When you need to add or remove respawning jobs or make any other change to the inittab file, you must tell init about the change and cause it to re-read the file. Some people use kill -HUP 1 to tell init to do this. This traditional method works on most versions of Unix, as long as you type it correctly. However, you can also run this telinit command:

telinit q

You can also use telinit s to switch to single-user mode.

Shutting down

init also controls how the system shuts down and reboots. The proper way to shut down a Linux machine is to use the shutdown command.

There are two basic ways to use shutdown. If you halt the system, it shuts the machine down and keeps it down. To make the machine halt immediately, use this command:

shutdown -h now

On most modern machines with reasonably recent versions of Linux, a halt cuts the power to the machine. You can also reboot the machine. For a reboot, use -r instead of -h.

The shutdown process takes several seconds. You should never reset or power off a machine during this stage.

In the preceding example, now is the time to shut down. This argument is mandatory, but there are many ways of specifying it. If you want the machine to go down sometime in the future, one way is to use +n, where n is the number of minutes shutdown should wait before doing its work. For other options, look at the shutdown(8) manual page.

To make the system reboot in 10 minutes, run this command:

shutdown -r +10

On Linux, shutdown notifies anyone logged on that the machine is going down, but it does little real work. If you specify a time other than now, shutdown creates a file called /etc/nologin. When this file is present, the system prohibits logins by anyone except the superuser.

When system shutdown time finally arrives, shutdown tells init to switch to runlevel 0 for a halt and runlevel 6 for a reboot. When init enters runlevel 0 or 6, all of the following takes place, which you can verify by looking at the scripts inside rc0.d and rc6.d:

1. init kills every process that it can (as it would when switching to any other runlevel).

# The initial rc0.d/rc6.d commands run, locking system files into place and making other preparations for shutdown.

# The next rc0.d/rc6.d commands unmount all filesystems other than the root.

# Further rc0.d/rc6.d commands remount the root filesystem read-only.

# Still more rc0.d/rc6.d commands write all buffered data out to the filesystem with the sync program.

# The final rc0.d/rc6.d commands tell the kernel to reboot or stop with the reboot, halt, or poweroff program.

The reboot and halt programs behave differently for each runlevel, potentially causing confusion. By default, these programs call shutdown with the -r or -h options, but if the system is already at the halt or reboot runlevel, the programs tell the kernel to shut itself off immediately. If you really want to shut your machine down in a hurry (disregarding any possible damage from a disorderly shutdown), use the -f option.

Pirates of the Caribbean on Stranger Tides 2011

2011-08-23T23:36:00.000-07:00

Pirates of the Caribbean on Stranger Tides 2011 को साहसिक कल्पनिक फिल्म हो, अनि यो श्रृंखला समुद्री डाकू हरुको चौथौ भाग हो, तीन फिल्म को निर्देशन गरिसकेका Gore Verbinski ले यो फिल्म पनि आफैले निर्देशन गरेका छन, Jerry Bruckheimer निर्माता को रूप मा सेवा गरेका छन .

डाउनलोड गर्नुहोस :

Pirates.of.the.Caribbean.On.Stranger.Tides.2011.TS.XViD.AC3-SCR0N.rar

Transformers 3

2011-07-21T23:44:00.000-07:00

Transformers: Dark of the Moon is a 2011 American science fiction-action film. It is the third film of the live-action Transformers film series, directed by Michael Bay and produced by Steven Spielberg. It is the sequel to Transformers and Transformers: Revenge of the Fallen and was released on June 29, 2011.The film is presented in regular 2D, Real D 3D and IMAX 3D,

DOWNLOAD : Size [400 m.b)

http://www.fileserve.com/file/QRxmfZP/Transformers.Dark.Of.The.Moon.2011.New.TS.ArabSeeD.DooSH.mkv

http://www.filesonic.com/file/1446908304/Transformers.Dark.Of.The.Moon.2011.New.TS.ArabSeeD.DooSH.mkv

Make A Autorun File For Ur Cd

2011-07-12T04:47:00.000-07:00

If you wanna make a autorun file for that CD you are ready to burn just read this...

1) You open notepad

2) now you write: [autorun]

OPEN=INSTALL\Setup_filename.EXE

ICON=INSTALL\Setup_filename.EXE

Now save it but not as a .txt file but as a .inf file.

But remember! The "Setup_filename.EXE" MUST be replaced with

the name of the setup file.

And you also need to rember that it is not all of the setup files there are

called '.exe but some are called '.msi

3) Now burn your CD with the autorun .inf file included.

4) Now set the CD in you CD drive and wait for the autorun to begin or

if nothing happens just double-click on the CD drive in "This Computer"

How to Disable The Send Error Report, to Microsoft

2011-07-05T22:09:00.000-07:00

To disable the stupid feature in WinXP which tries to send a report to Microsoft every time a program crashes you will have to do this:

*************************************************************************

Open Control Panel

Click on Performance and Maintenance.

Click on System.

Then click on the advanced tab

Click on the error reporting button on the bottom of the windows.

Select Disable error reporting.

Click OK

User's guide to avoiding virus infections

2011-06-28T21:57:00.000-07:00

User's guide to avoiding virus infections

Keeping an eye out for viruses

Computer viruses are everywhere! This guide will show you how to stay alert and how to avoid getting infections on your computer. Having an updated virus scanner is only a small part of this, there are many ways that you can prevent having viruses other than a virus scanner, as it will not always save you.

Types of viruses

There are many type of viruses. Typical viruses are simply programs or scripts that will do various damage to your computer, such as corrupting files, copying itself into files, slowly deleting all your hard drive etc. This depends on the virus. Most viruses also mail themselves to other people in the address book. This way they spread really fast and appear at others' inboxes as too many people still fall for these. Most viruses will try to convince you to open the attachment, but I have never got one that tricked me. In fact, I found myself emailing people just to make sure they really did send me something. It does not hurt to be safe.

Worms

Worms are different type of viruses, but the same idea, but they are usually designed to copy themselves a lot over a network and usually try to eat up as much bandwidth as possible by sending commands to servers to try to get in. The code red worm is a good example of this. This worm breaks in a security hole in Microsoft IIS (Internet Information Server) in which is a badly coded http server that, despite the security risks, a lot of people use it. When the worm successfully gets in, it will try to go into other servers from there. When IceTeks was run on a dedicated server at my house, there was about 10 or so attempts per day, but because we ran Apache, the attempts did not do anything but waste bandwidth and not much as I had it fixed a special way. Some worms such as the SQL slammer will simply send themselves over and over so many times that they will clog up networks, and sometimes all of the internet. Worms usually affect servers more than home users, but again, this depends on what worm it is. It is suspected that most worms are efforts from the RIAA to try to stop piracy, so they try to clog up networks that could contain files. Unfortunately, the RIAA have the authority to do these damages and even if caught, nothing can be done.

Trojans

Trojans are another type of virus. They are simply like a server in which enables hackers to get into and control the computer. A trojan such as Subseven can enable a hacker to do various things such as control the mouse, eject the cd-rom drive, delete/download/upload files and much more.

MBR virus

Boot sector viruses are another type, they are similar to file viruses, but instead they go in the boot sector and can cause serious damage when the computer is booted, some can easily format your drive simply by booting your computer. These are hard to remove.

Most viruses have various characteristics. For example, a worm can also be a trojan and also infect the boot sector. It all depends on how the virus is written and what it is designed to do. That's why there are not really strong structured categories, as they can easily mix one in the other.

Know the potentially dangerous files

Like any other files, viruses must be opened in order to do something. Most viruses come through e-mail as an attachment. Some will make it look like it's someone you know, and it will try to convince you to open an attachment. Never open attachments at any cost! Some viruses will infect files in programs, so opening a program will actually open the virus, maybe the same one, or another part of it.

All files have what is called an extension; This is the 3 last letters after the last period. For example, setup.exe has a file extension of .exe.

Extensions to watch out for are .exe .com .bat .scr .pif .vbs and others, but these are the most seen. .exe .com .bat .pif and .scr are valid extensions for executables. A virus writer will simply rename it to one of these and it will work the same way. .pif is a shortcut to an ms-dos program and will have the ms dos icon, but will still execute whatever code is in it, so an .exe can be renamed to .pif and be run the same way. .bat is a batch file, which can contain instructions to do various file activities, but again, a .exe can be renamed to .bat and it will execute it! .vbs is a visual basic script. For some reason, Microsoft provides this scripting language along with the scripting host to make it more convenient to design and write viruses quickly and easily, I've never seen another use for this scripting language other than for writing viruses. There are programs that are written with that language, but it is compiled into an exe. Exe is the usual extension for programs, you would not have a software CD install a bunch of vbs files all over!

Bottom line is, if you don't know what a file is just don't open it. Some viruses will sometimes be named a way as to mask the real file extension to make it look like a harmless file such as a image file. This is easily noticed, but can still be missed. Simply don't open unexpected files.

If you get something that appears like something legit, just ask the person it came from if they sent it. Most viruses use a friend's address to make it look like it comes from them. The virus does this by using the person's address when sending itself to the address book contacts.

Downloads

Email is not the only way to get viruses; P2P (file sharing programs such as kazaa, winmx, direct connect etc) is also another way to get viruses.

When downloading programs, the main thing to watch out for is the file size. If you are downloading a program that you expect to be rather large such as a game, don't grab a file that is 10KB, since it's most likely a virus. However, I've been caught with a virus even with large files, so file size is not the only thing to watch, as an exe is still valid even if junk is added at the end, so a 64KB virus will still function even if it is turned into 650MB.

Icons are something to look for too, fortunately, virus writers don't take time to put icons. If your download should be a setup file, you should see the icon of a setup file. If it's just the blank icon that typical plain or corrupted exes have, don't open it.

Another thing to do, which should be obvious, is to scan the file for viruses using updated virus definitions. But don't rely on only your virus scanner, as they are not perfect, and if the virus has not been reported to them yet, they won't know to create a definition for it!

Changing settings to stay safe

If you do open a virus, you want to avoid it going to all your friends. The simplest thing to do is to NOT use the windows address book. It is easy for viruses to get through and Microsoft is not doing anything about it. Just don't use it. Put them in spreadsheet or even better write them down somewhere. Don't use the address book.

Another "feature" to avoid is the auto preview. Some viruses can attempt to open themselves just by opening the email. There are security holes in Microsoft mail programs that allow this. In Microsoft Outlook, click on the view menu and remove auto preview. You need to do this for every folder, but the inbox is most important. In Outlook Express, click on the view menu and go to layout. In the dialog box, you will see a check box for show preview pane. Uncheck it and click ok.

Another thing you should change, especially if you download a lot, is the option that allows you to view the file extension. In Win98, go in any folder, click on view then folder options and choose the view tab and where it says hide file extension for known types, uncheck it. In win2k, it is the same process, but instead, go in the control panel and open the folder options icon.

Avoiding server worms

Some viruses, mostly worms, can exploit through servers and affect other servers from servers that have been infected. A good example is the SQL slammer. This was a worm that affected SQL servers run by Microsoft IIS and Microsoft SQL Server. Once the worm gets in, that particular server starts trying to find more exploitable driving internet connections to a halt in the process. Servers running Apache were unaffected by that, except for the many hits to try to get in. IceTeks received about 100 hits per day when it was run on a dedicated home server. Most hits came from major ISPs and other big websites that had no clue they were still affected.

The simple solution to avoid these types of viruses is to NOT use Microsoft based server software for your server, especially if it is a public server. The operating system is also crucial, but the actual server software is much more. Apache, which is free, is much more secure than Microsoft based server programs such as IIS. IIS may be easier to understand and administer, but it saves a lot of hassle to learn how to use Apache. IIS has a large number of vulnerabilities, such as the ability to gain access to cmd.exe and basically delete the whole drive by doing a ../ request in the address bar. These don't require viruses, but simply commands, but there are worms written to automatically make these commands. The code red does this.

Removing a virus

The best way to do this is to do a clean install. However, depending on how bad the virus is, a simple clean install won't remove it. So to be extra sure, you'll want to do a low level format. This is especially true of you got a boot sector virus, as even repartitioning and formatting won't quite remove it, but sometimes you can get away with an fdisk /mbr, but not all the time. here are various removal tools for viruses, it is good to use them and see if they work, but proceeding with the clean install is recommended. You never know if the virus is completely removed by deleting files you suspect are infected. Some viruses such as the Bugbear will close anti virus programs and other programs to make it hard and annoying to figure out what to do. A clean install is the best way to ensure that it's gone for good.

Viruses are out there, don't be one of the many infected ones! Stay alert and stay safe! Don't open unexpected files, regularly update your virus definitions and scan downloaded files!

I hope this article was useful for you!

How to fix Windows Installer problem

2011-06-25T00:14:00.000-07:00

Do you experience this kind of problem whenever you attemp to install an application in windows box (2k, xp)?

"The Windows Installer service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."

The ms website knowledge article 324516 gives 2 methods as a way of fixing this problem, but you might be very lucky if any of the 2 fixes the problem, alot of guys end up formating their systems and doing fresh windows installations or try wired ways of fixing it.

Well, the solution is very easy:

1. right click your root windows installation drive i.e drive where you installed windows
2. click properties at the bottom
3. select security tab
4. click Add and scroll down to SYSTEM account click add and click OK.
5. allow Full control permission and click Apply and then OK.

This should solve your problem with windows installer.

Excel 2010 Tips & Tricks

2011-06-18T01:59:00.000-07:00

Build robust Excel 2010 apps quickly and efficiently known as "Mr. Spreadsheet," John Walkenbach's name is synonymous with excellence in computer books that explain the complexities of various topics. With this collection of favorite Excel tips and tricks, you get a unique look at ways to make Excel 2010 more efficient than you ever imagined.

Download:

http://www.mediafire.com/?dx3le0qhqtmrb6n

Password: gulmisoft

E-Books for Photoshop

2011-06-16T05:50:00.000-07:00

E-Books for Photoshop

~~Download:~~

PHOTOSHOP CS5 ONE ON ONE EBOOK BY DEKE McClelland
ADVANCED PHOTOSHOP TECHNIQUES
PHOTOSHOP LAB COLOR

PHOTOSHOP CS4 LAYERS

PHOTOSHOP CS4 STUDIO TECHNIQUES

PHOTOSHOP CS5 ALL IN ONE FOR DUMMIES

PHOTOSHOP CS5 BIBLE

PHOTOSHOP CS5 ON DEMAND

PHOTOSHOP TOP 100 SIMPLIFIED

THE PHOTOSHOP CS5 POCKET GUIDE

PHOTOSHOP CS5

X-Men: First Class

2011-06-15T02:07:00.000-07:00

X-Men: First Class is a 2011 American superhero film directed by Matthew Vaughn. Based on the characters appearing in Marvel Comics, The film is set primarily in 1962 during the Cuban Missile Crisis and focuses on the relationship between Professor X and Magneto and the origin of their groups, the X-Men and the Brotherhood of Mutants. The film stars James McAvoy as Professor X and Michael Fassbinder as Magneto. Other cast members include Kevin Bacon, January Jones, Rose Byrne, Jennifer Lawrence, Zoë Kravitz, Nicholas Hoult and Lucas Till. The film was mostly shot in England and parts of the United States.

Cast:

James McAvoy as Professor Charles Xavier / Professor X

Michael Fassbinder as Erik Lehnsherr / Magneto

Kevin Bacon as Sebastian Shaw

Jennifer Lawrence as Raven / Mystique

January Jones as Emma Frost / White Queen

Rose Byrne as Dr. Moira MacTaggert

Nicholas Hoult as Dr. Henry "Hank" McCoy

Oliver Platt as The Man in Black

Ray Wise as the United States Secretary of State

Download:

http://www.filesonic.com/file/1223607921
http://www.filesonic.com/file/1224040431
or
http://www.fileserve.com/file/E3whWyv
http://www.fileserve.com/file/gkRFBqQ

Free Anti-Virus & Removal

2011-06-13T22:38:00.000-07:00

Free Anti-Virus & Removal

Clean An Infected Computer Using Free Anti-Virus & Virus Removal Programs!

Google Body

2011-06-10T22:05:00.000-07:00

Google Body is a web application that presents 3D anatomical models of the human body. Several layers from muscle tissues down to blood vessels can be made transparent to allow better study of individual body parts. Click Here

First, make sure you have installed Google Chrome 10, Mozilla Firefox 4, or another Web browser that supports WebGL. Note that iPad, iPhone, and other mobile devices are generally not yet supported.

Great Google Secrets

2011-06-09T06:43:00.000-07:00

But most people don't use it to its best advantage. Do you just plug in a keyword or two and hope for the best? That may be the quickest way to search, but with more than 3 billion pages in Google's index, it's still a struggle to pare results to a manageable number.

But Google is an remarkably powerful tool that can ease and enhance your Internet exploration. Google's search options go beyond simple keywords, the Web, and even its own programmers. Let's look at some of Google's lesser-known options.

Syntax Search Tricks

Using a special syntax is a way to tell Google that you want to restrict your searches to certain elements or characteristics of Web pages. Google has a fairly complete list of its syntax elements at

www.google.com/help/operators.html

. Here are some advanced operators that can help narrow down your search results.

Intitle: at the beginning of a query word or phrase (intitle:"Three Blind Mice") restricts your search results to just the titles of Web pages.

Intext: does the opposite of intitle:, searching only the body text, ignoring titles, links, and so forth. Intext: is perfect when what you're searching for might commonly appear in URLs. If you're looking for the term HTML, for example, and you don't want to get results such as

www.mysite.com/index.html

, you can enter intext:html.

Link: lets you see which pages are linking to your Web page or to another page you're interested in. For example, try typing in

link:http://www.pcmag.com

Try using site: (which restricts results to top-level domains) with intitle: to find certain types of pages. For example, get scholarly pages about Mark Twain by searching for intitle:"Mark Twain"site:edu. Experiment with mixing various elements; you'll develop several strategies for finding the stuff you want more effectively. The site: command is very helpful as an alternative to the mediocre search engines built into many sites.

Swiss Army Google

Google has a number of services that can help you accomplish tasks you may never have thought to use Google for. For example, the new calculator feature

(www.google.com/help/features.html#calculator)

lets you do both math and a variety of conversions from the search box. For extra fun, try the query "Answer to life the universe and everything."

Let Google help you figure out whether you've got the right spelling—and the right word—for your search. Enter a misspelled word or phrase into the query box (try "thre blund mise") and Google may suggest a proper spelling. This doesn't always succeed; it works best when the word you're searching for can be found in a dictionary. Once you search for a properly spelled word, look at the results page, which repeats your query. (If you're searching for "three blind mice," underneath the search window will appear a statement such as Searched the web for "three blind mice.") You'll discover that you can click on each word in your search phrase and get a definition from a dictionary.

Suppose you want to contact someone and don't have his phone number handy. Google can help you with that, too. Just enter a name, city, and state. (The city is optional, but you must enter a state.) If a phone number matches the listing, you'll see it at the top of the search results along with a map link to the address. If you'd rather restrict your results, use rphonebook: for residential listings or bphonebook: for business listings. If you'd rather use a search form for business phone listings, try Yellow Search

(www.buzztoolbox.com/google/yellowsearch.shtml).

Extended Googling

Google offers several services that give you a head start in focusing your search. Google Groups

(http://groups.google.com)

indexes literally millions of messages from decades of discussion on Usenet. Google even helps you with your shopping via two tools: Froogle

CODE

(http://froogle.google.com),

which indexes products from online stores, and Google Catalogs

CODE

(http://catalogs.google.com),

which features products from more 6,000 paper catalogs in a searchable index. And this only scratches the surface. You can get a complete list of Google's tools and services at

www.google.com/options/index.html

You're probably used to using Google in your browser. But have you ever thought of using Google outside your browser?

Google Alert

(www.googlealert.com)

monitors your search terms and e-mails you information about new additions to Google's Web index. (Google Alert is not affiliated with Google; it uses Google's Web services API to perform its searches.) If you're more interested in news stories than general Web content, check out the beta version of Google News Alerts

(www.google.com/newsalerts).

This service (which is affiliated with Google) will monitor up to 50 news queries per e-mail address and send you information about news stories that match your query. (Hint: Use the intitle: and source: syntax elements with Google News to limit the number of alerts you get.)

Google on the telephone? Yup. This service is brought to you by the folks at Google Labs

(http://labs.google.com),

a place for experimental Google ideas and features (which may come and go, so what's there at this writing might not be there when you decide to check it out). With Google Voice Search

(http://labs1.google.com/gvs.html),

you dial the Voice Search phone number, speak your keywords, and then click on the indicated link. Every time you say a new search term, the results page will refresh with your new query (you must have JavaScript enabled for this to work). Remember, this service is still in an experimental phase, so don't expect 100 percent success.

In 2002, Google released the Google API (application programming interface), a way for programmers to access Google's search engine results without violating the Google Terms of Service. A lot of people have created useful (and occasionally not-so-useful but interesting) applications not available from Google itself, such as Google Alert. For many applications, you'll need an API key, which is available free from

CODE

www.google.com/apis

. See the figures for two more examples, and visit

www.pcmag.com/solutions

for more.

Thanks to its many different search properties, Google goes far beyond a regular search engine. Give the tricks in this article a try. You'll be amazed at how many different ways Google can improve your Internet searching.

Online Extra: More Google Tips

Here are a few more clever ways to tweak your Google searches.

Search Within a Timeframe

Daterange: (start date–end date). You can restrict your searches to pages that were indexed within a certain time period. Daterange: searches by when Google indexed a page, not when the page itself was created. This operator can help you ensure that results will have fresh content (by using recent dates), or you can use it to avoid a topic's current-news blizzard and concentrate only on older results. Daterange: is actually more useful if you go elsewhere to take advantage of it, because daterange: requires Julian dates, not standard Gregorian dates. You can find converters on the Web (such as

CODE

http://aa.usno.navy.mil/data/docs/JulianDate.html

excl.gif No Active Links, Read the Rules - Edit by Ninja excl.gif

), but an easier way is to do a Google daterange: search by filling in a form at

www.researchbuzz.com/toolbox/goofresh.shtml or www.faganfinder.com/engines/google.shtml

. If one special syntax element is good, two must be better, right? Sometimes. Though some operators can't be mixed (you can't use the link: operator with anything else) many can be, quickly narrowing your results to a less overwhelming number.

More Google API Applications

Staggernation.com offers three tools based on the Google API. The Google API Web Search by Host (GAWSH) lists the Web hosts of the results for a given query

(www.staggernation.com/gawsh/).

When you click on the triangle next to each host, you get a list of results for that host. The Google API Relation Browsing Outliner (GARBO) is a little more complicated: You enter a URL and choose whether you want pages that related to the URL or linked to the URL

(www.staggernation.com/garbo/).

Click on the triangle next to an URL to get a list of pages linked or related to that particular URL. CapeMail is an e-mail search application that allows you to send an e-mail to google@capeclear.com with the text of your query in the subject line and get the first ten results for that query back. Maybe it's not something you'd do every day, but if your cell phone does e-mail and doesn't do Web browsing, this is a very handy address to know.

Hide Any Drive

2011-06-08T05:34:00.000-07:00

This would Quite seems funny. If you do hide your drive in windows with out software, but this is possible . you come right place. Most of you must have wondered if there exists a way without using software to Hide A Drive completely so that it cannot be viewed or accessed without unlocking it. Well for those who have and who haven't yet, here is a easiest method on How To Hide Any Drive In Just 3 Steps.

Here we go, follow these 3 simple steps: For Window XP,

Step.1

Go To Start --> Run or use Win+R keys and type "cmd" and press Ok.

Step.2

This will open Command Prompt for you. Now type "diskpart" and press Enter:

Once in Diskpart type "list volume" and press Enter:

This will list all the partitions in ur system.

Enter The Following Command

"select volume 10".

Remember to change 10 with the volume number of your partition you want to hide and press Enter:

Step.3

Now as in my example I am hiding drive G: so my last command is "remove letter G" and then press Enter:

All done. Now open your computer and see that drive is made hidden. Now to make a drive Unhidden

Follow first 2 steps as such but in step 3 instead of remove letter G use "assign letter G"

How to Protect an Email Account from SPAM

2011-06-07T06:12:00.000-07:00

Most of us get SPAM every day. Some of us get more and some little. Even a newly created email account will begin to receive spam just after a few days of it’s creation. Many times we wonder where these spam come from and why? But this question remains unanswered within ourselves. So in this post I will try my best to give every possible information about the spam and will also tell you about how to combat spam.

What is SPAM?

Spam is the abuse of electronic messaging systems (including most broadcast media, digital delivery systems) to send unsolicited bulk messages indiscriminately. Most widely recognized form of spam is email spam.

Where do these SPAM come from?

These spam come only from spammers and never from a legitimate user or a company. These spammers send a single email to hundreds (some times thousands or millions) of email addresses at a time. They either send it manually or use spambots to automate the process of spamming.

Why do spammers SPAM?

The main goal of spammers is to send the spam (unsolicited bulk messages) to as many people as possible in order to make profit. For example, John builds a small website to sell an ebook which gives information about weight loss. In order to make sales he needs publicity for his website. Instead of spending money on advertising, John decides to create an email which contains information about his site along with it’s link and send this email to say 100 email addresses in his contact list. If 1 person out of hundred buy this book john gets $10. What if he sends this email to 1000s of email addresses. He gets $100. Imagine, if he sends this email to 1 Million email addresses he gets $100000.

Now I hope you understood the idea behind spamming. So in order to make money, spammers send their advertising emails to as many people as possible without respecting the recipient’s privacy.

From where do SPAMmers get my email address?

On the Internet there exists many sites who collect the email IDs of people and sell them to spammers in bulk. Most often, people sign up for monthly newsletters and take up surveys. This is the time where these scam sites get their email addresses. Also many spammers collect email addresses by using spambots. These spambots collect email addresses from the Internet in order to build mailing lists. Such spambots are web crawlers that can gather email addresses from Web sites, newsgroups, forums, special-interest group (SIG) postings, and chat-room conversations.

Spammers also use the trick of creating Hoax Emails for gathering a huge list of email IDs. For example, a spammer sends a hoax email which says “Forward this Message to Help Severely Burned Child”. This email claims that 11 cents will be donated to the child’s family every time the message is sent to others. Most of the people believe this and start forwarding this hoax email to all of the IDs in their contact list. In this way the email spreads rapidly and eventually when it reaches the creator (spammer), the spammer gets a huge list of valid email addresses in the email header. When you get these kind of hoax emails, you can see for yourself in the email header which contains a huge list of email addresses of all those people to whom the email is being forwarded to. This is one of the effective methods used by spammers to gather email addresses.

Is SPAMming legal?

Spamming is completely illegal. Yet it is really difficult to stop spammers from spamming since they keep moving from one hosting company to another after getting banned. This makes it practically impossible to catch spammers and prosecute them.

How to protect my email account from getting SPAMmed?

The following methods can be used to combat email spam.

1. Use spam filters for your email account. If you’re using email services like Gmail, Yahoo, Hotmail etc. then spam filters are used by defaut. Each spam filter has it’s algorithm to detect spam emails and will automatically move them to SPAM folder. This keeps your inbox free from spam. However some spam emails become successful to make their way into the inbox by successfully bypassing the filters.

2. Do not post your email address in public forums, user comments and chat-rooms. Give your email address only to trustworthy websites while signing up for newsletters.

3. While taking up online surveys and filling up feedback forms, it is better not to give your personal email address. Instead singup for a dummy email account and use this for surveys and feedback forms.

4. While posting your contact email address on your website use this format: emailaddress [at] yoursite.com instead of emailaddress@yoursite.com. This protects your email address from being indexed by spambots.

5. Do not respond to hoax messages. When you receive a hoax email, avoid forwarding it to your friends. Examples of hoax messages can be found at www.hoax-slayer.com. If you really want to forward it to your friends, make sure that you use “Bcc” (blind certified copy) option to send the email. This will hide all the email IDs to which the mail is forwarded to.

I hope this helps. Pass your suggestions and feedback via comments.

Priest (2011)

2011-06-04T06:15:00.000-07:00

Priest is a 2011 American supernatural action film starring Paul Bettany as the title character. The film, directed by Scott Stewart, is based on the Korean comic of the same name. In an alternate world, humanity and vampires have warred for centuries. After the last Vampire War, the veteran Warrior Priest (Bettany) lives in obscurity with other humans inside one of the Church's walled cities. When the Priest's niece (Lily Collins) is kidnapped by vampires, the Priest breaks his vows to hunt them down. He is accompanied by the niece's boyfriend (Cam Gigandet), who is a wasteland sheriff, and a former Warrior Priestess.

Download
(FileSonic):
http://www.filesonic.com/file/1124679051/Priest.2011.R5.V2.LINE.XviD.Feel-Free.part1.rar
http://www.filesonic.com/file/1124682741/Priest.2011.R5.V2.LINE.XviD.Feel-Free.part2.rar
http://www.filesonic.com/file/1124679111/Priest.2011.R5.V2.LINE.XviD.Feel-Free.part3.rar

Make Your PC Faster, Guarnteed

2011-06-03T06:41:00.000-07:00

Make Your PC Faster, Guaranteed..

1. First, run a scandisk or checkdisk. Let Windows fix any errors.

2. Run a disk cleanup utility...this will flush your temporary internet folder, trash can, temp system files, etc.

3. Delete any garbage files or data...if possible, run a Duplicate File Finder program.

4. Run Defrag on all partitions (NOTE: run this after you have deleted all trash and excess files!)

5. Run a registry cleaner utility and delete or get rid of any orphaned entries in that registry.

6. Check your exisiting swap file for it's size and location (*will explain location later in the post). If you have alot of ram (i.e. 1 gig and over) set this swap file to something small, like 250 mb. The reason is that this will force Windows to load more into memory, resulting in faster performance (note: some games and applications actually require a certain sized swap file so check your applications performance after making a size adjustment for any error messages.)

7. Under XP, you can tell Windows to use Classic Style on your desktop, - this will remove the neat single click and internet-style desktop but for lower end systems this will improve performance in other areas, such as gaming and multi-tasking.

8. Run msconfig and under startup and only keep the programs that are essential to load in the tray icon (and hence stay resident in memory). Uncheck anything else non-essential, like an ATI or Nvidia control panel, Quicktime utility, Real Audio, etc.

9. Upgrade drivers! Check for the latest BIOS, video, motherboard, sound, etc drivers from the manufacturers. Alot of my friends had chipsets on their motherboard that had advanced disk management capabilities or AGP port settings but the drivers weren't loaded for them so they were never being used. A simple upgrade realized a noticeable difference. For instance, they didn't have the latest driver for their AGP port so it was set to 1x, instead of being used at 4x!

10. (OK, so this won't speed up your PC but it could save you alot of time and trouble later on!) After making all these improvements, make a working backup! I use Ghost, but for XP users you can also use System Restore...

-FOR ADVANCED USERS-

1. Take a look under the hood (for IDE owners). How are your IDE devices configured? If you have more than 1 hard drive, put the master hard drive on the primary IDE channel and the secondary hard drive on the secondary IDE channel (most motherboards have two IDE channels).

2. Place all CDROM drives, DVD readers etc. on the secondary IDE channel (or SCSI bus, etc). This will reduce I/O contention with your master hard drive which should have your OS and apps installed...

3. Remember when I mentioned the location of the swap file? OK, if you have 2 hard drives and you have one on the primary IDE channel and the other on the secondary IDE channel, move the swap file to a partition ON THE SECOND hard drive (on the secondary IDE channel). This will greatly improve system performance as the PC can write to the swap file while loading and running OS and system commands without I/O contention on the primary IDE channel!

4. Take a look under the hood (for SCSI owners) What kind of SCSI do you have? If it's the newer Ultra 160/320 etc cards then guess what? Any devices placed on the same bus will automatically default to the slowest drive on the chain...this means that if you have say, an Ultra 160 SCSI card, and it has an Ultra 160 drive (capable of transferring 160 mb/sec) on the same chain as a SCSI cdrom drive (capable of only 40 mb/sec) then the whole bus slows down to the 40 mb/sec speed...use different chains for the slower devices and maximize those hard drives!

5. Run a utility like WCPUID and check the settings...is your CPU/front speed bus/AGP port running as fast as they should be? If not, check your drivers and BIOS configuration options. Also, are all of your chipset features enabled? If not, then enable them! (usually done in your BIOS!)

6. Dig in to the BIOS...check settings like boot order, for example...is it checking the floppy first? Change this! Select your order to reflect the hard drive first, then CD, then floppy for a noticeable boot time improvement. Also disable any non-used on board peripherals...for instance, - does your motherboard come with an on-board NIC card? Guess what, if you don't use that NIC card and it is enabled it will eat up valuable CPU cycles and can be detrimental to your systems' performance. DISABLE THAT MUTHA! Also, see if you can play with memory timing and CPU clock frequencies (NOTE! This is for expert users only!) Set these timings to "Aggressive" and see what happens in your games and apps...Also, check to see what your video aperature is set to. If you have a video card with 128 megs of on-baord memory, your aperature should be set to this amount too. Read the BIOS owner manual for further non-general performance tricks or improvements! Do you have the latest BIOS firmware version?

7. Under hardware properties, check to see that everything is working properly, and fix any hardware contention issues. You'll see the dreaded yellow exclamation point (!) beside any hardware componenet that is not working correctly.

8. Evaluate the potential for system/hardware upgrades...usually, the best bang for the buck is adding memory so buy all that you can afford (don't go much above 512 megs for Win 98 or ME). If you have a motherboard with an 8x - capable AGP port but you are using an older 4x video card, consider upgrading to an 8x card. You get the idea here...

9. Quit using software pigs like Norton system utilities, etc. These place files everywhere and can be a real system resource hog on lower end PCs.

10. Did I mention to make a good backup? Do it now! Also, while you're at it, run a good virus program with the latest definitions.

There are more options to make your system faster, such as overclocking, etc. but (just about) everything I've mentioned in this tech post costs you nothing and will result in faster system performance! Good luck and if you have any questions on how to do anything mentioned here, ask a knowledgeable friend or consult a book, - don't mess up something trying to do something you are not sure of!

Good luck and I'd like to dedicate this post to all of Worldwide which has given me so much! You're all great.

FireFox Speed Tweaks

2011-06-03T06:40:00.000-07:00

FireFox Speed Tweaks

Yes, firefox is already pretty damn fast but did you know that you can tweak it and improve the speed even more?

That's the beauty of this program being open source.

Here's what you do:

In the URL bar, type “about:config” (type without quota) and press enter. This will bring up the configuration “menu” where you can change the parameters of Firefox.

Note that these are what I’ve found to REALLY speed up my Firefox significantly - and these settings seem to be common among everybody else as well. But these settings are optimized for broadband connections - I mean with as much concurrent requests we’re going to open up with pipelining… lol… you’d better have a big connection.

Double Click on the following settings and put in the numbers below - for the true / false Booleans - they’ll change when you double click.

Code:

browser.tabs.showSingleWindowModePrefs – true

network.http.max-connections – 48

network.http.max-connections-per-server – 16

network.http.max-persistent-connections-per-proxy – 8

network.http.max-persistent-connections-per-server – 4

network.http.pipelining – true

network.http.pipelining.maxrequests – 100

network.http.proxy.pipelining – true

network.http.request.timeout – 300

One more thing… Right-click somewhere on that screen and add a NEW > Integer. Name it “nglayout.initialpaint.delay” (type without quota) and set its value to “0” (type without quota). This value is the amount of time the browser waits before it acts on information it receives. Since you’re broadband - it shouldn’t have to wait.

Now you should notice you’re loading pages MUCH faster now!

Cracking Zip Password Files

2011-06-03T06:39:00.002-07:00

Tut On Cracking Zip Password Files..

What is FZC? FZC is a program that cracks zip files (zip is a method of compressing multiple files into one smaller file) that are password-protected
(which means you're gonna need a password to open the zip file and extract files out of it). You can get it anywhere - just use a search engine such as altavista.com.
FZC uses multiple methods of cracking - bruteforce (guessing passwords systematically until the program gets it) or wordlist attacks (otherwise known as dictionary attacks.
Instead of just guessing passwords systematically, the program takes passwords out of a "wordlist", which is a text file that contains possible passwords. You can get lots
of wordlists at www.theargon.com.).
FZC can be used in order to achieve two different goals: you can either use it to recover a lost zip password which you used to remember but somehow forgot, or to crack
zip passwords which you're not supposed to have. So like every tool, this one can be used for good and for evil.
The first thing I want to say is that reading this tutorial... is the easy way to learn how to use this program, but after reading this part of how to use the FZC you should
go and check the texts that come with that program and read them all. You are also going to see the phrase "check name.txt" often in this text. These files should be in FZC's directory.
They contain more information about FZC.
FZC is a good password recovery tool, because it's very fast and also support resuming so you don't have to keep the computer turned on until you get the password,
like it used to be some years ago with older cracking programs. You would probably always get the password unless the password is longer than 32 chars (a char is a character,
which can be anything - a number, a lowercase or undercase letter or a symbol such as ! or &) because 32 chars is the maximum value that FZC will accept, but it doesn't really matter,
because in order to bruteforce a password with 32 chars you'll need to be at least immortal..heehhe.. to see the time that FZC takes with bruteforce just open the Bforce.txt file,
which contains such information.
FZC supports brute-force attacks, as well as wordlist attacks. While brute-force attacks don't require you to have anything, wordlist attacks require you to have wordlists,
which you can get from www.theargon.com. There are wordlists in various languages, various topics or just miscellaneous wordlists. The bigger the wordlist is,
the more chances you have to crack the password.
Now that you have a good wordlist, just get FZC working on the locked zip file, grab a drink, lie down and wait... and wait... and wait...and have good thoughts
like "In wordlist mode I'm gonna get the password in minutes" or something like this... you start doing all this and remember "Hey this guy started with all this bullshit
and didn't say how I can start a wordlist attack!..." So please wait just a little more, read this tutorial 'till the end and you can do all this "bullshit".

We need to keep in mind that are some people might choose some really weird passwords (for example: 'e8t7@$^%*gfh), which are harder to crack and are certainly impossible
to crack (unless you have some weird wordlist). If you have a bad luck and you got such a file, having a 200MB list won't help you anymore. Instead, you'll have to use a
different type of attack. If you are a person that gives up at the first sign of failure, stop being like that or you won't get anywhere. What you need to do in such a situation
is to put aside your sweet xxx MB's list and start using the Brute Force attack.
If you have some sort of a really fast and new computer and you're afraid that you won't be able to use your computer's power to the fullest because the zip cracker doesn't
support this kind of technology, it's your lucky day! FZC has multiple settings for all sorts of hardware, and will automatically select the best method.

Now that we've gone through all the theoretical stuff, let's get to the actual commands.
--------------------------------------------------------------------------------
Bruteforce
--------------------------------------------------------------------------------
The command line you'll need to use for using brute force is:

fzc -mb -nzFile.zip -lChr Lenght -cType of chars

Now if you read the bforce.txt that comes with fzc you'll find the description of how works Chr Lenght and the Type of chars, but hey, I'm gonna explain this too. Why not, right?... (but remember look at the bforce.txt too)

For Chr Lenght you can use 4 kind of switches...

-> You can use range -> 4-6 :it would brute force from 4 Chr passwors to 6 chr passwords
-> You can use just one lenght -> 5 :it would just brute force using passwords with 5 chars
-> You can use also the all number -> 0 :it would start brute forcing from passwords with lenght 0 to lenght 32, even if you are crazy i don't think that you would do this.... if you are thinking in doing this get a live...
-> You can use the + sign with a number -> 3+ :in this case it would brute force from passwords with lenght 3 to passwords with 32 chars of lenght, almost like the last option...

For the Type of chars we have 5 switches they are:

-> a for using lowercase letters
-> A for using uppercase letters
-> ! for using simbols (check the Bforce.txt if you want to see what simbols)
-> s for using space
-> 1 for using numbers

Example:
If you want to find a password with lowercase and numbers by brute force you would just do something like:

fzc -mb -nzTest.zip -l4-7 -ca1

This would try all combinations from passwords with 4 chars of lenght till 7 chars, but just using numbers and lowercase.

*****
hint
*****

You should never start the first brute force attack to a file using all the chars switches, first just try lowercase, then uppercase, then uppercase with number then lowercase with numbers, just do like this because you can get lucky and find the password much faster, if this doesn't work just prepare your brain and start with a brute force that would take a lot of time. With a combination like lowercase, uppercase, special chars and numbers.

--------------------------------------------------------------------------------
Wordlis
--------------------------------------------------------------------------------

Like I said in the bottom and like you should be thinking now, the wordlist is the most powerfull mode in this program. Using this mode, you can choose between 3 modes, where each one do some changes to the text that is in the wordlist, I'm not going to say what each mode does to the words, for knowing that just check the file wlist.txt, the only thing I'm going to tell you is that the best mode to get passwords is mode 3, but it takes longer time too.
To start a wordlist attak you'll do something like.

fzc -mwMode number -nzFile.zip -nwWordlist

Where:

Mode number is 1, 2 or 3 just check wlist.txt to see the changes in each mode.
File.zip is the filename and Wordlist is the name of the wordlist that you want to use. Remember that if the file or the wordlist isn't in the same directory of FZC you'll need to give the all path.

You can add other switches to that line like -fLine where you define in which line will FZC start reading, and the -lChar Length where it will just be read the words in that char length, the switche works like in bruteforce mode.
So if you something like

fzc -mw1 -nztest.zip -nwMywordlist.txt -f50 -l9+

FZC would just start reading at line 50 and would just read with length >= to 9.

Example:

If you want to crack a file called myfile.zip using the "theargonlistserver1.txt" wordlist, selecting mode 3, and you wanted FZC to start reading at line 50 you would do:

fzc -mw3 -nzmyfile.zip -nwtheargonlistserver1.txt -f50

--------------------------------------------------------------------------------
Resuming
--------------------------------------------------------------------------------

Other good feature in FZC is that FZC supports resuming. If you need to shutdown your computer and FZC is running you just need to press the ESC key, and fzc will stop. Now if you are using a brute force attack the current status will be saved in a file called resume.fzc but if you are using a wordlist it will say to you in what line it ended (you can find the line in the file fzc.log too).
To resume the bruteforce attack you just need to do:

fzc -mr

And the bruteforce attack will start from the place where it stopped when you pressed the ESC key.
But if you want to resume a wordlist attack you'll need to start a new wordlist attack, saying where it's gonna start. So if you ended the attack to the file.zip in line 100 using wordlist.txt in mode 3 to resume you'll type

fzc -mw3 -nzfile.zip -nwwordlist.txt -f100

Doing this FZC would start in line 100, since the others 99 lines where already checked in an earlier FZC session.

Well, it looks like I covered most of what you need to know. I certainly hope it helped you... don't forget to read the files that come with the program

Delete An "undeletable" File

2011-06-03T06:39:00.001-07:00

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL <filename> where <filename> is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.

Or you can try this

Open Notepad.exe

Click File-->Save As-->

locate the folder where ur undeletable file is

Choose 'All files' from the file type box

click once on the file u wanna delete so its name appears in the 'filename' box

put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)

click save,

It should ask u to overwrite the existing file, choose yes and u can delete it as normal

Here's a manual way of doing it. I'll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)

5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1

6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.

7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

Kung Fu Panda 2

2011-06-03T06:39:00.000-07:00

Kung Fu Panda 2

Kung Fu Panda 2 is a American 3D 2011 computer-animated action comedy film and the sequel to the 2008 film Kung Fu Panda. The cast of the original film reprised their voice roles. The film was released on May 26, 2011 in Real D 3D and Digital 3D.

Cast :

* Jack Black as Po, a Giant Panda

* Angelina Jolie as Tigress, a South China Tiger

* Dustin Hoffman as Master Shifu, a Red Panda

* Jackie Chan as Monkey, a Golden Langur

* Lucy Liu as Viper, a Green Tree Viper

* Seth Rogen as Mantis, a Chinese Mantis

* David Cross as Crane, a Red-crowned Crane

* James Hong as Mr. Ping, a Goose

* Jean-Claude Van Damme as Master Croc, a Chinese Alligator

* Victor Garber as Master Thundering Rhino, a Javan Rhinoceros

* Michelle Yeoh as The Soothsayer, a Goat

* Dennis Haysbert as Master Storming Ox, an Ox

* Gary Oldman as Lord Shen, an albino Indian Peafowl

* Danny McBride as Wolf Boss, a Grey Wolf

* Paul Mazursky as Musician Bunny

Download From MediaFire:
http://www.mediafire.com/?lk9d72axb78mb3y
http://www.mediafire.com/?4trutaxf6heku23
http://www.mediafire.com/?dd965yvun9r14aj
http://www.mediafire.com/?35ftlyrv3z4c0xx

Download From Davvas:
http://davvas.com/c0xf9g1lkik5
http://davvas.com/pyffgjos3i97
http://davvas.com/rmhciswtu48o

Password: icinema3satu.com

Boot Winxp Fast

2011-06-03T06:38:00.001-07:00

Boot Winxp Fast
Follow the following steps

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\

2. From the Start menu, select "Run..." & type "gpedit.msc".

3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.

4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".

5. Click "OK", "Apply" & "OK" once again to exit.

6. From the Start menu, select "Run..." & type "devmgmt.msc".

7. Double click on "IDE ATA/ATAPI controllers"

8. Right click on "Primary IDE Channel" and select "Properties".

9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".

10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.

11. Reboot your computer.

Notepad बाट Folder कसरी Lock गर्ने

2011-06-03T06:38:00.000-07:00

Notepad बाट Folder कसरी Lock गर्ने

तपाई को मुल्यवान डाटा हरु सुरछित संग राख्न को लागी अनेक किसिम का सॉफ्टवेर हरु डाउनलोड गर्नु हूनछ . तर बिन Software को मदत बाट तपाई को फोल्डर कसरी Lock गर्ने भन्ने बारेमा एउटा सानो Script हेरौ.

पहिला Notepad ओपन गर्नुहोस तेसपछि तल दिएको Script Type गर्नुहोस.

ren nepal nepal.{21EC2020-3AEA-1069-A2DD-08002B30309D}

नेपाल भएको ठाऊमा तपाई को फोल्डर नाम दिनुहोस, तेसपछि Lock .bat नाम दिएर सेव गर्नुहोस.

फेरी अर्को Notepad ओपन गरी तल दिएको Script टाइप गर्नुहोस.

ren nepal.{21EC2020-3AEA-1069-A2DD-08002B30309D} nepal

नेपाल भएको ठाऊमा आफ्नो फोल्डर को नाम लेख्नुहोस, तेसपछि key .bat नाम दिएर सेव गर्नुहोस.

मुक्य कुरा : जब तपाईको फोल्डर Lock गर्न चाहानु हुन्छ त्येस समय मा फोल्डर र Lock फाइल एकै ठाऊमा हुनुपर्छ.

Unlock गर्न चाहानु हुन्छ भने Key file पानी एकै ठाऊमा हुनुपर्छ .
lock को लगी lock फाइल लाई Double क्लिक गर्नुहोस. unlock को लगी key फाइल लाई Double क्लिक गर्नुहोस.
तपाई को फोल्डर lock गरीसके पछि Key फाइल लाई कुनै सुरछित ठाऊमा राख्नु होस. जसले अरु कसैले तपाई को फोल्डर ओपन गर्न नसकुन जस बाट तपाई को फोल्डर सुरछित हुनेछ .

Adobe CS5 Portable Complete Edition 2011

2011-06-03T06:37:00.001-07:00

This is a collection of Portable Adobe CS5 apps. I did not create any of these myself, but did notice there are not many available around so figured I'd post them. All of the apps work for me on Win7 Ultimate 64bit .

The contains::

Portable Adobe Fireworks CS5 Final 11.0.0.484
Portable Adobe Flash Catalyst CS5 1.0.1.2
Portable Adobe Illustrator CS5 v15.0.0http://appzpro.softarchive.net/addnews/
Portable Adobe InDesign CS5 Final 7.0.0.355
Portable Adobe Photoshop CS5 12.0
Portable Adobe Soundbooth CS5 v3.0
Portable Adobe Dreamweaver CS5 11.0.4909

Download ::

Mirror (Filesonic)
http://www.filesonic.com/file/1041364104/Adobe_CS5-Portable.part1__AppzPro.softarchive.net.rar
http://www.filesonic.com/file/1041364124/Adobe_CS5-Portable.part2__AppzPro.softarchive.net.rar
http://www.filesonic.com/file/1041377294/Adobe_CS5-Portable.part3__AppzPro.softarchive.net.rar
http://www.filesonic.com/file/1041364094/Adobe_CS5-Portable.part4__AppzPro.softarchive.net.rar

Mirror (FileServe)
http://www.fileserve.com/file/7kvvaHd
http://www.fileserve.com/file/NvW5hnS
http://www.fileserve.com/file/pxDBZAG
http://www.fileserve.com/file/8YQkZeE