發哥的教學網誌

Centos幾個與hostname 與domain有關的檔案

2023-02-06T21:19:00.000-08:00

/etc/sysconfig/network

/etc/hosts

/etc/resolv.conf

特別必須注意的是/etc/hosts這個檔案的結構

/etc/resolv.conf這個檔案裡是標註網址查詢的伺服器

/etc/sysconfig/network定莪你主機名稱的地方

主機對外下戴資料與yum更新都出問題

2023-02-05T16:25:00.001-08:00

前些日子因為移機，伺服主機必須移到機房，而資訊人員說只能放置主機，不能含其他的配備，結果我原先都是以一個IP分享器連對外實體IP，而分享器之後再指向伺服主機的塔配方式，因而就無法操作了(原先一再因沒有domail name而無法將實體IP轉換為好記的網域名稱，後來因為用了可自動獲取網域名的IP分享器來促成架站的方式，也就因為又遇困難了。<--------IP分享器搭配指向伺服主機的另一個好處是防火牆的設定簡單易操作)。

而為了解決這些問題，只好實際再去申請一個domail name(網域名稱)指向我的實體IP，而主機的iptabels也只好認實設定了，而因為新的domail name，與我原先網站所指向的domail name不同，結果就造成了我必須更新整個網站與domail name有關的設定，而最初不清楚這方面的問題，結果導致我不論是用wegt 或yum要下載更新資料都因無法連新該主機(host)而出現連線被拒絕的問題(連寄信都有問題)，後來在問看鳥哥關於dns(網域)與host(主機)之間的關係之文章後，重新設定的/etc/hosts，與/etc/resolv.conf這兩個檔案之後，終於恢復了正常供能了。

linux尋找列出含有關鍵字串的檔案

2023-02-01T18:53:00.000-08:00

linux若要列出含有關鍵字串的檔案，可以使用 find 尋找指定的檔案後，再搭配 grep 指令與 -l 參數列出檔案名稱，篩選出含有關鍵字的檔案。

例如列出 /var/ 目錄之下，內容含有 test 這個關鍵字的 *.conf 設定檔，可以執行以下指令：

find /var/ -name "*.conf" -exec grep -l test {} \;

gallery2 在布景主內下加入google adsense 程式碼

2023-02-01T17:16:00.001-08:00

首先登入你的gallery2網站管理選到佈景主題

選擇你要改的佈景主題

這裡有一個現成的可下載安裝在你的伺服器裡(下載後要解壓縮)的佈景主題的目錄裡(例如：/var/www/html/gallery2//themes)。

然後用ssh 登入server(伺服器主機)，到gallery2的目錄裡，找到你要改的那個佈景主題，然後更改三個檔案，

分別將你的google AdSense 程式碼複製並貼到三個檔案的如下位置：

改成你的google AdSense 程式碼即可。

限制固定IP可以連線到webserver，當固定IP被換成另一組時，必須調整的內容有如下：

2019-09-10T23:02:00.000-07:00

1.首先是router的IP存取限制要調整
接著如你的服務有webmin、ssh、phpmyadmin、防火牆，
2.則你還必須先在server端本地登入，將ssh server 的/etc/hosts.allowserver 的/etc/hosts.allow加入更改你新的IP
3.再到clinet端登入ssh，編輯vi /etc/webmin/miniserv.conf，更改加入你新的IP
4.再登入webmin，的網頁伺服器裡的/預設伺服器/個別路徑選項/(phpmyadmin)/存取控制/限制進入\新增你的新IP。
或者編輯/etc/httpd/conf.d/phpMyAdmin.conf，新增你新的IP

如何從命令列登入取消qnap的兩階段認證功能

2016-12-17T21:54:00.004-08:00

Assuming you still have ssh access (as it's not two-factor protected) ... remove the secondSV.conf from the user profile in question in /mnt/HDA_ROOT/.config/.qos_config/users/[username]/
如若你要登入的帳號是admin則使用下列指令移除secondSV.conf
rm /mnt/HDA_ROOT/.config/.qos_config/users/admin/secondSV.conf

中正高中校內ftp網址

2016-10-07T06:07:00.003-07:00

203.72.62.124

acer pc school MAC

2016-09-26T21:30:00.001-07:00

EC-A8-6B-91-1F-04

我個人的學生名冊與成績資料庫更新方式

2016-09-09T02:58:00.001-07:00

我個人的學生名冊與成績資料庫更新方式

將舊的資料庫分別匯出為sql與OpenDocument Spreadsheet格式各一份，然後打開OpenDocument Spreadsheet檔，將新一年的學生資料加入，再將其匯入到mysql資料庫裡，這時會是一個所謂的工作表的資料表，再將該資料表裡的資料匯出為sql檔，而後將該sql檔裡的

所有新的人員資料複製，再將原第一次匯出的sql檔裡的人員資料取代，最後再存檔匯入資料庫裡即可！

使用 sed 工具在 Linux 環境下快速完成「搜尋取代」的任務

2016-03-01T05:30:00.001-08:00

在 Windows 有 grepWin 可快速執行多檔案的搜尋取代任務，而在 Linux 環境下就非 sed 莫屬了，為了能讓 sed 的功效達到極致，你還需要多瞭解 find 指令與 Regular expression 語法才能對你的搜尋取代任務更靈活的運用，以下是幾個常用的指令與說明。

學習 sed 的流程：

先練習單一檔案操作，並練習搜尋取代的語法 (不直接寫入檔案)
確認語法正確後，就可以套用 -i 選項參數可將搜尋取代的結果直接寫入該檔案
確認無誤後可搭配 find 指令進行多檔案批次搜尋取代 (功能強大、威力十足)

使用 sed 的範例：

1. 針對單一檔案進行搜尋取代 ( 針對每一行第一次出現的搜尋文字 ) ( 區分大小寫 )

sed -e 's/cpu/memory/' test.txt

備註 1：如上例 cpu 為搜尋字串，而 memory 為替代字串，而替代的結果會直接輸出在畫面上。
備註 2：此範例並沒有加上 -i 選項參數，所以替代的結果並不會寫入 test.txt 檔案。

2. 針對單一檔案進行搜尋取代 ( 針對每一行第一次出現的搜尋文字 ) ( 不區分大小寫 )

sed -e 's/cpu/memory/g' test.txt

3. 針對單一檔案進行搜尋取代 ( 針對每一行所有出現過的搜尋文字 ) ( 不區分大小寫 )

sed -e 's/cpu/memory/g' test.txt

4. 針對單一檔案進行搜尋取代 ( 針對每一行第一次出現的搜尋文字 ) ( 將搜尋取代的結果直接回寫檔案 )

sed -i -e 's/cpu/memory/g' test.txt

5. 利用 find 指令找到多個符合條件的檔案，並使用 sed 做搜尋取代的動作

find . -type f -exec sed -e 's/cpu/memory/g' '{}' \;

注意：使用 find 指令搭配 -exec 參數時，最後一個 \; 是非常重要的關鍵，一定要加上才能正常執行。

linux 配合find 刪除特定檔名的檔案方法

2016-02-25T18:04:00.001-08:00

find ./ -name "*.cache" -exec rm -rf {} \

以 mod_evasive 阻擋 D.o.S 攻擊

2016-02-24T17:49:00.000-08:00

在 CentOS 下有裝 EPEL 的話，使用 yum 安裝即可
$ yum install mod_evasive
編輯mod_evasive設定檔

$ vim /etc/httpd/conf.d/mod_evasive.conf

# 用來儲存黑名單的檔案大小
DOSHashTableSize 3097
# 同一個網址在 DOSPageInterval 內被同一個IP存取幾次時，要阻擋此IP
DOSPageCount 2
# 同一個IP在 DOSSiteInterval 存取了網站幾次時，要阻擋此IP
DOSSiteCount 50
DOSPageInterval 1
DOSSiteInterval 1
# 被加入阻擋名單的IP要被擋多久，預設為10秒
# 若被阻擋期間持續攻擊時，此時間會一直加上去，所以不用設很大
DOSBlockingPeriod 10

#用這個目錄來記錄log檔
DOSLogDir "/var/lock/mod_evasive"

# 設定白名單
DOSWhitelist 127.0.0.1
DOSWhitelist 192.168.*.*

建立可供 apache 寫入log的 mod_evasive 目錄

$ mkdir /var/lock/mod_evasive; chown apache /var/lock/mod_evasive

重載 apache
$ service httpd reload

安裝DoS Deflate 減輕 DDoS攻擊

2016-02-24T16:27:00.000-08:00

(D)DoS Deflate is a lightweight bash shell script designed to assist in the process of blocking a denial of service attack. It utilizes the command below to create a list of IP addresses connected to the server, along with their total number of connections.

netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n

How To Install (D)DoS Deflate :-

wget http://www.inetbase.com/scripts/ddos/install.sh
chmod 0700 install.sh
./install.sh

How To UnInstall (D)DoS Deflate :-

wget http://www.inetbase.com/scripts/ddos/uninstall.ddos
chmod 0700 uninstall.ddos
./uninstall.ddos

How To Edit Configuration File:-

vi /usr/local/ddos/ddos.conf

How To Check The Number Of Connected Ips:-

sh /usr/local/ddos/ddos.sh

How To Restart DDos Deflate:-

sh /usr/local/ddos/ddos.sh -c

更新ClamAv病毒碼！

2016-02-24T00:56:00.001-08:00

找到freshclam.conf，然後加入以下三行！
DNSDatabaseInfo current.cvd.clamav.net
DatabaseMirror clamav.stu.edu.tw
DatabaseMirror db.ac.clamav.net
DatabaseMirror database.clamav.net
使系統自動更新病毒碼
在crontab中加入
N * * * * /usr/local/bin/freshclam --quiet
其中的N值要在3~57中間，但不要用偶數值，因為很多工加台都設成偶數值了。

QNAP開機自動執行的方法

2016-02-23T19:34:00.002-08:00

Skills required

must be able to remote login via ssh or telnet (e.g. use SSH PuTTY)
must know how to edit files using nano, vi, or edit via SFTP (e.g. use WinSCP)

MTD-based method

autorun.sh is a script which will be executed on every startup of the TS-x09, TS-x19 and TS-x39. Editing this file allows you to start your own programs or overwrite config files with your own copies.

Manual edit of autorun.sh

Log into your QNAP device using SSH or Telnet, for instance by using Putty
Optional: install nano; use ipkg install nano & edit with nano instead of vi
Mount config ramblock by finding your specific model below:

TS-201:
Mount the config ramblock /dev/mtdblock4:
# mount -t ext2 /dev/mtdblock4 /tmp/config

1 bay: TS-109, TS-109P, TS-110, TS-119,
2 bay: TS-209, TS-209P, TS-212, TS-219 (TS-219P II: since the new firmware update you maybe have to use ext4 instead of ext2),
4 bay: TS-409 (Marvell ARM), TS-412, TS-419P:
Mount the config ramblock /dev/mtdblock5:
# mount -t ext2 /dev/mtdblock5 /tmp/config

TS-439, TS-509, TS-639, TS-809, TS-809U (x86):
Mount the config ramblock /dev/sdx6:
# mount -t ext2 /dev/sdx6 /tmp/config

TS-269L:
Mount the config ramblock /dev/sdc6:
# mount -t ext2 /dev/sdc6 /tmp/config
Create/Edit /tmp/config/autorun.sh .
1. either using vi:
```
# vi /tmp/config/autorun.sh
```

Get vi editor into edit mode: press a
Edit whatever you need to
Exit edit mode: press ESC
1. 1. Save and exit: press ZZ
2. or editing it using a desktop PC and e.g. SFTP
Ensure that /tmp/config/autorun.sh is executable:
```
# chmod +x /tmp/config/autorun.sh
```

IMPORTANT: Unmount the mounted flash partition:
```
# umount /tmp/config
```

editautorun.sh: script to ease autorun.sh edit

If you edit this file regularly you can save some time by creating a shell script (e.g. editautorun.sh) to automate the process. You can call the script by either putting it in the environment path, or add its folder to the path or call it by an alias.

The script contents are:

For TS-201 use ...

mount -t ext2 /dev/mtdblock4 /tmp/config
vi /tmp/config/autorun.sh
chmod +x /tmp/config/autorun.sh
echo .
echo "unmounting /tmp/config..."
umount /tmp/config

For TS-109, TS-109P, TS-119, TS-209, TS-209P, TS-219, TS-412, TS-409 (Marvell ARM) use ...

mount -t ext2 /dev/mtdblock5 /tmp/config
vi /tmp/config/autorun.sh
chmod +x /tmp/config/autorun.sh
echo .
echo "unmounting /tmp/config..."
umount /tmp/config

TS-439, TS-509, TS-639, TS-809, TS-809U (x86) use ...

mount -t ext2 /dev/sdx6 /tmp/config
vi /tmp/config/autorun.sh
chmod +x /tmp/config/autorun.sh
echo .
echo "unmounting /tmp/config..."
umount /tmp/config

autorun.sh: one script to rule them all

Frequently mounting and editing autorun.sh on the flash could be an annoying task. More important, it may reduce the lifetime of some flash blocks. Flash blocks have limited write/erase cycles, and the mtdblock device driver does little to prevent their wear. Read more on this on the http://www.linux-mtd.infradead.org/faq/general.html#L_ext2_mtd" alt="http://www.linux-mtd.infradead.org/faq/general.html#L_ext2_mtd" title="http://www.linux-mtd.infradead.org/faq/general.html#L_ext2_mtd">Linux mtd

web site.

To avoid this, you could configure autorun.sh to launch another script located in the inner drive: in this way there no need to always mount and modify the file inside the flash. but only edit the script file located on your drive.

Create the directory /share/HDA_DATA/.qpkg/autorun and file autorun.sh with:

mkdir /share/HDA_DATA/.qpkg/autorun
cd /share/HDA_DATA/.qpkg/autorun/
touch autorun.sh
chmod +x autorun.sh

The autorun.sh located on the flash could be something like this (just two lines that won't need many changes!):

#!/bin/sh
/share/HDA_DATA/.qpkg/autorun/autorun.sh &

and then edit the file /share/HDA_DATA/.qpkg/autorun/autorun.sh to be used to launch all your startup scripts.

IMPORTANT Notes!

1. Never put any larger files on your flashboot devices and ramdisk; instead, create symbolic links to whatever you want to put there, e.g.:
Create a link from /usr (which is in ramdisk) to /share/MD0_DATA/jre1.6.0_10 (which is on a hard disk) at the mountpoint /usr/java

# ln -sf /share/MD0_DATA/jre1.6.0_10 /usr/java

2. Always use the full system path because locations like /opt/bin or /opt/sbin might not have been exported yet when Autorun.sh is executed, e.g:

No good.

svnserve -d --listen-port=4000 -r /share/subversion

This is better.

/opt/bin/svnserve -d --listen-port=4000 -r /share/subversion

If it still fails to start svnserve, you might try adding this line to your autoexec script:

/bin/ln -sf /opt/bin/ /share/HDA_DATA/opt/bin/

3. Many startup scripts in /etc/init.d overwrite their corresponding configuration files in /etc. In this case overwriting the config file using autorun.sh is not enough; we also have to overwrite the startup script itself. Moreover, many startup scripts get excecuted before autorun, such that we also have to restart the service. In this case an autorun.sh may look like this:

#!/bin/sh

cp /share/MD0_DATA/admin/nfs /etc/init.d/nfs
cp /share/MD0_DATA/admin/exports /etc

/etc/init.d/nfs restart

Very ugly, indeed! However, it seems this is the only way to make it work (unless you want to throw out the QNAP OS and install a 'better' OS on your NAS).

4. On our QNAP TS-879 Pro we were not able to run

/opt/bin/rsyncd-acl.sh start

from the autorun.sh as /opt is not the one from Optware but a directory containing one file, i.e. nasconfig_fs.img.tgz.

Thus we modified /tmp/config/autorun.sh to

#!/bin/sh
log=/share/MD0_DATA/.qpkg/Optware/var/log/autorun
date > $log
# removing bogus /opt
/bin/rm /opt/nasconfig_fs.img.tgz /opt 2>> $log >> $log
/bin/rmdir /opt 2>> $log >> $log
# link correct /opt
/bin/ln -s /share/MD0_DATA/.qpkg/Optware /opt 2>> $log >> $log
# run autorun.sh
/opt/etc/autorun.sh 2>> $log >> $log

created a log file directory

mkdir -p /opt/var/log

and created /opt/etc/autorun.sh on the disk

#!/bin/sh
/opt/bin/rsyncd-acl.sh start

thus no mounting of the flash partition is necessary anymore.

QPKG-based method

With firmware 3.8.2, the #MTD-based_method was broken. With the next firmware update, this bug was corrected, but in the meanwhile, the below workaround has been devised.

This method consists of declaring a dummy QPKG which launches your script at startup.

Log into your QNAP device using SSH or Telnet, for instance by using Putty
Edit QPKG config file:

# vi /etc/config/qpkg.conf

Declare a new dummy package by adding something like that in this file, but take care about the order. e.g. if you would like to start a service from a optware package, be sure optware is initialized before:

[autorun]
Name = autorun
Version = 0.1
Author = neomilium
Date = 2013-05-06
Shell = /share/MD0_DATA/.qpkg/autorun/autorun.sh
Install_Path = /share/MD0_DATA/.qpkg/autorun
Enable = TRUE

As you can see, Shell is the interesting variable: at boot-time, QNAP OS will launch each QPKG's Shell variable content.

Note: if your NAS doesn't have /share/MD0_DATA (i.e. is a one-drive NAS then substitute /share/MD0_DATA by /share/HDA_DATA , on a NAS with the new Storage Manager substitute /share/MD0_DATA by /share/CACHEDEV1_DATA/), put the right directory into the Shell and Install_Pathvariables and adapt the following commands to your needs.

Create the dummy package directory:

# mkdir /share/MD0_DATA/.qpkg/autorun

Create the autorun script with the contents of your choice:

# vi /share/MD0_DATA/.qpkg/autorun/autorun.sh

Note: don't forget "#!/bin/sh" at the beginning of script.

Set the execute bit:

# chmod +x /share/MD0_DATA/.qpkg/autorun/autorun.sh

Reboot and enjoy!

MTD-based method (old)

This section is here only to make sure existing anchor links continue to work. The meat is in the section MTD-based method.

QPKG-based method (new)

This section is here only to make sure existing anchor links continue to work. The meat is in the section QPKG-based method

Trick & tips

Waiting for encrypted partitions

If your data partition is encrypted, you might have some script that has to wait until the encrypted partition is available. I added a script called waitforenc.sh in my autorun-directory:

#! /bin/sh

# This script ends after the encrypted filesystem has been mounted.

# The following exits successfully (0) if MD0 is mounted
cat /etc/mtab | grep -q MD0
while [[ $? -ne 0 ]] ; do
        sleep 5
        cat /etc/mtab | grep -q MD0
done

And now I'm able to call scripts *after* the encrypted partition is available, without blocking other scripts:

(./waitforenc.sh; /etc/init.d/ldap_server.sh restart ) &

Calling all scripts in a certain directory

Place a file called listoffiles.sh in a directory, create a subdirectory called scripts, add listoffiles.sh to your autorun:

#! /bin/sh
# listoffiles.sh

BASEDIR=$(dirname $0)

echo "" > log/userfiles.log

for i in scripts/*.sh ; do
        if [[ -x $i ]] ; then
                echo -n "$i " >> log/userfiles.log
                echo `date` >> log/userfiles.log
                $i 2>&1 >> log/userfiles.log
                cd $BASEDIR
        fi
done

Optimized networking

You can also try different values from http://www.speedguide.net/read_articles.php?id=121" alt="http://www.speedguide.net/read_articles.php?id=121" title="http://www.speedguide.net/read_articles.php?id=121">http://www.speedguide.net/read_articles.php?id=121

">SpeedGuide.net

ifconfig eth0 txqueuelen 50000
ifconfig eth1 txqueuelen 50000
echo 1 > /proc/sys/net/ipv4/tcp_rfc1337
echo 2 > /proc/sys/net/ipv4/tcp_frto
echo 2 > /proc/sys/net/ipv4/tcp_frto_response
echo 1 > /proc/sys/net/ipv4/tcp_mtu_probing
echo 1 > /proc/sys/net/ipv4/tcp_window_scaling
echo 1 > /proc/sys/net/ipv4/tcp_workaround_signed_windows
echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse
echo 0 > /proc/sys/net/ipv4/tcp_tw_recycle
echo 1 > /proc/sys/net/ipv4/tcp_low_latency
echo 1 > /proc/sys/net/ipv4/tcp_ecn

QNAP mount samb分享的目錄

2016-02-23T00:31:00.002-08:00

mount.cifs //192.168.12.34/sharename /share/Public/WindowsShare -o username=user,password=pass

在 Linux 要查詢記憶體大小, 可以用下述指令

2016-02-20T04:43:00.002-08:00

在 Linux 要查詢記憶體大小, 可以用下述指令:

free
free -m
cat /proc/meminfo

linux 掛載遠端ftp伺服器的方法

2016-02-20T04:41:00.001-08:00

A、安装curlftpfs

A.1、安装DAG repository

Fedora可以直接yum install curlftpfs，CentOS不行，得用DAG repository，所以得先安装DAG repository。

rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm

A.2、安装 curlftpfs

yum install curlftpfs

B、挂载FTP服务器

B.1、用curlftpfs命令挂载

curlftpfs -o codepage=utf8 ftp://username:password@192.168.192.168 /ftp

也可以用(這是開放權限)curlftpfs -o codepage=utf8 -o rw,allow_other,uid=0,gid=0 ftp:// username: password @192.168.1.111 /ftp

codepage：编码

username： FTP用户名

password:       FTP密码
192.168.1.111:  FTP地址
/ftp:           准备挂载到的路径

B.2、卸载挂载

fusermount -u /ftp

或

umount /ftp

B.3、开放权限

这样其它用户也能读写了,uid和gid改成你自己的id

sudo curlftpfs –o rw,allow_other,uid=0,gid=0 ftp:// username: password @192.168.1.111 /ftp

B.4、开机自动挂载
echo "curlftpfs#username:password@192.168.1.111 /ftp fuse allow_other,uid=0,gid=0 0 0" >> /etc/fstab

兩個NAS掛載其中一台分享出來的資料夾成為本地硬碟！

2016-02-20T04:31:00.000-08:00

Steps to do:

On the ARM based QNAP, create the share in common, and grant rights to the NFS Intel based QNAP

On the Intel baed QNAP, create a directory like: / share / MD0_DATA / remotenas

Then type the Following:

mount -t nfs : / / share / MD0_DATA / remotenas

我的nas檔案同步到其外接USB碟的指令

2016-02-12T07:40:00.001-08:00

rsync -avl --delete -exclude-from=/tmp/nonecopy /volume1/ /volumeUSB1/usbshare/LocalBackup/

mysql取代字串語法

2016-01-30T21:23:00.002-08:00

The easiest way I have found is to dump the database to a text file, run a sed command to do the replace, and reload the database back into MySQL.

All commands are bash on Linux, from memory.

Dump database to text file

mysqldump -u user -p databasename > ./db.sql

Run sed command to find/replace target string

sed -i 's/oldString/newString/g' ./db.sql

Reload the database into MySQL

mysql -u user -p databasename < ./db.sql

Easy peasy.

wget 直接下載google硬碟的檔案

2016-01-28T02:35:00.000-08:00

首先將檔案設請網際網路上所有使用者均可以找到並檢視
接著用下列語法
wget --no-check-certificate https://googledrive.com/host/ID -O /本地端的檔案儲存路徑與檔名
其中的ID就是若你分享的連結為：https://drive.google.com/file/d/0B7wsIMxK5Td0dTNPdnNFtsdfwv/view?usp=sharing
即為0B7wsIMxK5Td0dTNPdnNFtsdfwv
換言之你的下載完整指令為wget --no-check-certificate https://googledrive.com/host/0B7wsIMxK5Td0dTNPdnNFtsdfwv -O /temp/test.tar.bz2

centos 降級php

2016-01-23T18:36:00.001-08:00

yum downgrade php\*

在 CentOS 6.x 安裝 ClamAV

2016-01-22T07:34:00.002-08:00

在 CentOS 6.x 安裝 ClamAV

ClamAV 是 Linux 最常用來做防毒整合的套件之一，本文將介紹如何在 CentOS 6.x 中安裝 ClamAV。

新增 EPEL 套件來源

1

root # rpm -ivh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

安裝 ClamAV 套件

1

root # yum install clamav clamd clamav-devel -y

更新 ClamAV 病毒定議檔

1

root # freshclam

開機時啟用 ClamAV Daemon

1

root # service clamd start

測試掃掃檔案

1

root # clamscan -r /etc

伺服器突然連不到？

2015-09-21T00:15:00.000-07:00

今天在家裡，連上學校的伺服器，結果不僅速度很慢，且出現一些資料庫有問題的訊息，心想因為昨天在學校升級joomla，而尚其在升級文章時，不知是檔案太大，資料大多，還是升級軟體的bug，反正就是超慢，所以我就回家，讓伺服器慢慢跑，而我回到家也高興的看著該檔案越來越大(表示一直在升級中)，等隔天起床看，發現在家裡很難再連上伺服器，且以phpmyadmin幾乎進不去了，心想可能是mysql的負擔太大，以至於伺服器無法處理資料庫相關的需求，於是我只好將伺服器重啟，結果重啟後，在家中就再也連不到伺服器了(心想，可能是伺服器的loading 太重，所以重開機的速度太久)。
今天到校發現伺服器已重開完機了，但我從其它電腦想連上它，卻連不上(無論是http，或ssh)，於是我重啟重mysql與http都無效，結果發現我的network根本沒啟動，原因是eth0，因為我與伺服器網卡被設定為eth2，所以我只好重設setup network，將eth0指定到eth2，好不易設定好久後，卻發現仍然無法連上internet，再看才發現，我router所指定的伺服器ip沒有對到我的伺服器IP，原來是我的伺服器IP跑掉了，而router所指定的http server與真定server的IP不合，所以難怪外面連不進來，後來在router裡指定ip與MAC，而最後總算在網海裡又見到我的server了。