technology

present state

2012-04-11T23:31:00.002-07:00

i have got a new opportunity last month and i am moving from my present company to the new one.i want everything to go smooth ,i and my soul are together always thats my strength and they have told me they will not exist alone..stay together or die together...i am seeing new hopes of crossing the borders of my home land in sometime...i have still things to complete ...i must run for it...comfort,joy and pleasure..which comes through money health love...though i know money comes through intelligence and knowledge ..

hey

2011-12-18T05:01:00.000-08:00

i am getting so bored..:(....moving out is not working....kind of not feeling to for trips...or feel like doing nothing.....if my travel plans are not working out..i am dead....pray for ma relocation plans and may be very early i become movable..:)

GUITAR classes in bangalore

2011-12-13T01:13:00.000-08:00

Hey buddies if you are looking for guitar classes in bangalore, look no further join the unwind music school in koramangala....:).They have got amazing instructors there.I have been playing for 2 years and wanted to take my playing to the next level...now its been aroung 3 years guitar playing and i have improved a lot in leads(Rhythm guitar i have already been doing before goin to the place).

Best revenge movies

2011-10-24T00:27:00.000-07:00

1) Hannibal rising :This is a must watch for all you revenge freaks.A brother sets out to revenge the morons who ate his sister alive.Horrifying scenes.This is an underrated movie , but after you have seen it you would never say i wasted my time . A pure classic

2) KIll BILL: A classic though,its too much.A girl killing thousands of warriors..a good flick.

3)Law abiding citizen : One of my friends recommended it and turned out to be an exciting drama,worth atleast two times watch.A man takes revenge on the wretched law who did nothing when his wife was brutally murdered.

4)Lucky number slevin: ALL time favourite of mine.A boy sets out to find killer of his father and kills them without letting them know untill last moment.

5)What lies beneath: Its a horror cum revenge movie wherein a ghost takes on its killer.The movies plot is just fantastic and i loved the movie so much , you will never guess who the killer is.Sure to make you sit on the edge of the seat.

6)Last house on the left: Crazy movie in which parents takes revenge on drifters who raped their daughter.A classic.I still remember the dad sticking a hammer on one's head with its sharp edge.

and please guys comment if you liked the movies and please give me good suggestions.

Most hottest movies of all times

2011-10-18T01:13:00.000-07:00

1) UNFAITHFUL - Till now i havent come across a movie like this.It has a flavour of extramarital affair between diane lane ane and olivier martinez.Olivier plays an ultimate seducer who just wants to get laid every time.Diane lane plays a mother of a kid with Richard gere playing the husband.Things start growing really hot when the mother meets the drifter accidently.He has that unique charm and conversation talents in the movie that diane falls for it even though its for only sex.She cant get him out of her mind,so was his influence.her feelings for the guy keeps increasing and the husband becomes suspicious.He keeps a detective to find out whats goin on ..rest of the movie, i am not unveiling as it has got an amazing climax to the story..what happened to the drifter?.Will the couple seperate.?.Can richard take the pain caused by his wife?...

2)Fatal attraction - This has a similar plot, as in unfaithful.Very interesting movie though.Sizzling affair between micheal douglas and and a hot lady(dont remember her name she is famous though).But movie makes you sit on the edge of the chair till the end.

3)CAUGHT
It also has the same plot.Unsatisfied wife working in a fish shop starts a steamy affair with a new recruit at the shop.The mom was so desperate in the movie lol.

Easy ways to create rock progressions

2011-10-18T01:01:00.000-07:00

Imagine u want to make a chord progression and play leads on it....

lets do it in the key of Am

most of the chord progrssions have a common format

Am Am Fmaj Dm Em
I VI IV V

in any key u can apply this rule and get the rock progression going..cool isnt it.

You can use Am pentatonic scale to jam over this progrssion.it will sound cool.You can add some extra notes if u have knowledge of major modes.:).

Is there any need of another life....?.

2011-09-06T02:32:00.000-07:00

I have no ambition of living an other life...one more time...when people say i wanna live like an actor next time..i kind of get myself a hard laugh...our life that we have got now is only once.....we have to satisfy our emotions during this time..how many more days u want 28000 days arent enough...only characters that i envy strongly are Bond and the casanova types..simply they they didnt care about anything...even then they knew how to maintain their three parts of life ..their health their wealth their love....they enjoyed all those and one day they died.They knew they were gonna die..We have to write a book about "Getting out of boredom and maintaining three parts of our life"...we should be able to live the best time pass....imagine 28000 days without tension,pleasure,laugh,sex,excitement....can we live through it..?...nope never...Even if these things come out of breaking current rules and regulations i feel u should do it...push and pull is required throughout the life....

MY GOD

2011-09-02T21:07:00.000-07:00

for the last i and a half months i am going through a lot of boredom...dont know things arent getting fine ....both getting a job in a cool country far from home and pickup...i have to pull things together..hopefully it comes fine for me.

some times attraction principles can backfire..

2011-06-24T11:14:00.000-07:00

Even when i am a bachelor of attraction..some times..or most of the times i get trapped inside the attraction created subconsciously by others...i know it has to be avoided..

"---we should value those attraction which can return something to us for the entertainment we have given for the attraction...otherwise we have to move to another attraction...bluntly entertaining and pursuing attraction is an addiction..i know this and i am capable of meeting new attractions so i can leave my present attraction----"
principle of a jerk...

and i know that this holds true n every walks of life..i have to grow self-centric..before i start thnking of others..no wonders the attractions were behind kings and heroes..and they were so self centric....

Something about death

2011-06-07T01:53:00.000-07:00

....I have thought many times how we are going to die...What will be our final thoughts before we pass away...even though i understand it doesnt matter.I don wanna die that regular bed death or die as a patient.When i die i wanna die healthy with my body and mind in good shape..We are anyway born here why not live an exciting life..why not live the way like Mr Bond lived....I remember the sentence from TROY...."Let them say i lived in the time of hector ,the horse tamer....Let them say i lived in the time of Achillies"...I feel all these warriors knew the simple facts about life which is just propagating our genes to the next generation...since they knew this early they decided to make their lives more exciting..more thrilling...they were self centric..they lived a jerk life...they held on only their own values...coz they knew it wouldnt last long...i have taken a lot of decisions for myself and i am sure i will make all of them happen....when i die i will die the death of a king...i will have everything that i can possibly wish for....i will not let someone control me for i am capable of controlling myself..i will have made some books for the next generation.

ACCOUSTIC COVERS

2011-05-06T09:55:00.001-07:00

ACCOUSTIC COVERS

2011-05-06T09:55:00.000-07:00

http://www.youtube.com/watch?v=-W4XOAnfx24

PRETTY COOL...

2011-03-11T01:19:00.000-08:00

I just came to know that..there are two guitarist,one violinist and one drummer in my office.I mean how cool is that.....?...Learning opportunities...

7 BIT CRC GENERATOR CIRCUIT

2011-03-02T03:02:00.000-08:00

Hey guys today i am posting THE CRC7Bit generator Verilog code here.I have not checked it for compilation errors,but that you can solve very easily.if you understand the code it will be eazy for you to extend it to 16 bit CRC generator.Its generic in the sense all the connection vectors are programmable...all you need to give is the polynimial for connection vectors for each bit...i plan to explain it with a diagram later on..But for now only the Verilog code.....The Diagram will be coming soon....

/* GENERIC 7 bit CRC GENERATOR CKT
the module creates 7 bit CRC depending on the polynomial given to it as input and gives out serial 7 bit serial CRC. "enable" should be high for the input bits which need to be shifted into the 7 bit CRC generator.crc_Shift should be high to get the serial crc data out of this module.The same can be used for the CRC verification at the receiver end,for this reason
crc_7bits is ported out.
Designer: Arun Kathiru Date: March 2 2011 */

module CRC7(
clk,
serial_Data,
crc_7bits,
data_Out,
enable,
crc_Shift,
poly_0Bit, /*which bits should be xored and given to lsb should be given as polynomial*/
poly_1Bit, /*which bits should be xored and given to 1st bit should be given as polynomial*/
poly_2Bit, /*which bits should be xored and given to 2nd bit should be given as polynomial*/
poly_3Bit, /*which bits should be xored and given to 3rd bit lsb should be given as polynomial*/
poly_4bit, /*which bits should be xored and given to 4th bit lsb should be given as polynomial*/
poly_5bit, /*which bits should be xored and given to 5th bit lsb should be given as polynomial*/
poly_6bit /*which bits should be xored and given to 6th bit lsb should be given as polynomial*/

);
input clk,
input serial_Data;
input crc_Shift;
input enable;
input [7:0] poly_0Bit; /* the seventh bit should be 0 if u dont want to xor the serial_Data with other bits,otherwise its 1*/
input [7:0] poly_1Bit;
input [7:0] poly_2Bit;
input [7:0] poly_3Bit;
input [7:0] poly_4Bit;
input [7:0] poly_5Bit;
input [7:0] poly_6Bit;

output reg [6:0] crc_7bits;

reg [6:0] poly_0Bit;
reg [6:0] poly_1Bit;
reg [6:0] poly_2Bit;
reg [6:0] poly_3Bit;
reg [6:0] poly_4Bit;
reg [6:0] poly_5Bit;
reg [6:0] poly_6Bit;

wire crc_0Bit;
wire crc_1Bit;
wire crc_2Bit;
wire crc_3Bit;
wire crc_4Bit;
wire crc_5Bit;
wire crc_6Bit;

output data_Out;

assign crc_0Bit = (poly_0Bit(6) AND crc_7bits(6)) XOR (poly_0Bit(5) AND crc_7bits(5)) XOR (poly_0Bit(4) AND crc_7bits(4))
XOR(poly_0Bit(3) AND crc_7bits(3)) XOR (poly_0Bit(2) AND crc_7bits(2)) XOR (poly_0Bit(1) AND crc_7bits(1)) XOR(poly_0Bit(0) AND crc_7bits(0)) XOR (poly_0Bit(7) AND serial_Data);

assign crc_1Bit = (poly_1Bit(6) AND crc_7bits(6)) XOR (poly_1Bit(5) AND crc_7bits(5)) XOR (poly_1Bit(4) AND crc_7bits(4))
XOR(poly_1Bit(3) AND crc_7bits(3)) XOR (poly_1Bit(2) AND crc_7bits(2)) XOR (poly_1Bit(1) AND crc_7bits(1)) XOR(poly_1Bit(0) AND crc_7bits(0)) XOR (poly_1Bit(7) AND serial_Data);

assign crc_2Bit = (poly_2Bit(6) AND crc_7bits(6)) XOR (poly_2Bit(5) AND crc_7bits(5)) XOR (poly_2Bit(4) AND crc_7bits(4))
XOR(poly_2Bit(3) AND crc_7bits(3)) XOR (poly_2Bit(2) AND crc_7bits(2)) XOR (poly_2Bit(1) AND crc_7bits(1)) XOR(poly_2Bit(0) AND crc_7bits(0))XOR (poly_2Bit(7) AND serial_Data);

assign crc_3Bit =(poly_3Bit(6) AND crc_7bits(6)) XOR (poly_3Bit(5) AND crc_7bits(5)) XOR (poly_3Bit(4) AND crc_7bits(4))
XOR(poly_3Bit(3) AND crc_7bits(3)) XOR (poly_3Bit(2) AND crc_7bits(2)) XOR (poly_3Bit(1) AND crc_7bits(1)) XOR(poly_3Bit(0) AND crc_7bits(0))XOR (poly_3Bit(7) AND serial_Data);

assign crc_4Bit =(poly_4Bit(6) AND crc_4bits(6)) XOR (poly_4Bit(5) AND crc_7bits(5)) XOR (poly_4Bit(4) AND crc_7bits(4))
XOR(poly_4Bit(3) AND crc_7bits(3)) XOR (poly_4Bit(2) AND crc_7bits(2)) XOR (poly_4Bit(1) AND crc_7bits(1)) XOR(poly_4Bit(0) AND crc_7bits(0))XOR (poly_4Bit(7) AND serial_Data);

assign crc_5Bit =(poly_5Bit(6) AND crc_7bits(6)) XOR (poly_5Bit(5) AND crc_7bits(5)) XOR (poly_5Bit(4) AND crc_7bits(4))
XOR(poly_5Bit(3) AND crc_7bits(3)) XOR (poly_5Bit(2) AND crc_7bits(2)) XOR (poly_5Bit(1) AND crc_7bits(1)) XOR(poly_5Bit(0) AND crc_7bits(0))XOR (poly_5Bit(7) AND serial_Data);

assign crc_6Bit = (poly_6Bit(6) AND crc_7bits(6)) XOR (poly_6Bit(5) AND crc_7bits(5)) XOR (poly_6Bit(4) AND crc_7bits(4))
XOR(poly_6Bit(3) AND crc_7bits(3)) XOR (poly_6Bit(2) AND crc_7bits(2)) XOR (poly_6Bit(1) AND crc_7bits(1)) XOR(poly_6Bit(0) AND crc_7bits(0))XOR (poly_6Bit(7) AND serial_Data);

assign data_Out = crc_7bits[6];

always@(posedge clk,negedge reset_n)
begin
if(!reset_n)
crc_7bits <= 7'b0;
else
begin
if(enable == 1'b1)
begin
crc_7bits[6:0] <= {crc_6Bit,crc_5Bit,crc_4Bit,crc_3Bit,crc_2Bit,crc_1Bit,crc_0Bit};
end
else if (crc_Shift == 1'b1)
crc_7bits[6:0] <= {crc_7bits[5:0],1'b0};
end
end

endmodule

DIGITAL DESIGN PUZZLES SITE..

2011-03-01T02:22:00.000-08:00

Hey guys , i just found a pretty good site which discusses about very tricky digital circuit implementations.

Take a look at it.

http://asicdigitaldesign.wordpress.com/

http://www.exploreroots.com

very good sites ...Enjoy solving the puzzles..EnJOY.CHEEERS...

TURNED TO SWIMMING

2011-02-21T03:23:00.001-08:00

Given dance a break...I am confident about the basics of three dance forms..salsa,casino rueda,bachata.....gotta apply that into practice now..i dont think too much knowledge about dance is required for the clubs...gotta find some rueda and salsa clubs....Rocking days ahead....

And swimming ,its so much of fun...will take only sometime more....kinda cool time pass and excercise....There are things ahead....lets see...

TECH TARGETS...

2011-01-31T23:12:00.000-08:00

Gotta finish the USB and AHB interview questions....i gotta finish it in two weeks....

IF I AM A FAN , I AM A FAN ONLY TO THIS MAN.......

2011-01-12T22:13:00.000-08:00

"No regrets for past action, does not care about anything unless and untill he wants to, irresistible "ladies man" of all times, and an adventure mine everybody would always like to have,a person who understands the meaning of life "which is nothingness" , a person who takes care of his money,health,love part of his life in balance."

-------THE MAN WHO KNOWS LIFE IS A TIME PASS, AND DOES EVERYTHING HE LIKES BEFORE HE PASSES AWAY---

DANCING STARTED

2011-01-05T11:27:00.000-08:00

It was little bit awkward to dance with someone you just met...i think you will get used to it....i plan to complete salsa to an intermediate level,and practice for myself thereafter...its a totally new experience altogether......Well skills are getting added up...parts are becoming to get assembled for the ultimate design...

2010-12-29T01:46:00.000-08:00

Free-IQTest.net - Free IQ Test

TASKS TO COMPLETE....

2010-12-22T02:50:00.000-08:00

1) START DMAT ACCOUNT AND START TRADING.
2) FINISH DANCE BASICS...
3) STUDY DC and PT.Design compiler and prime time and make cv compatiable with U.K requirements.
4) GET A BETTER PACKAGE...
5) LEAVE THE PLACE SOON...
6) Become good at finger picking guitar.
7) Become an expert talking to strangers and loose the so called shame...though you can show it even after loosing it.Become even more attractive and irresistible.

hope to complete all these this year,and OMG my age is running faster than ever...cant pull it back...Gotta do a lot of things before passing away...though i know that its all just a time pass....The lesson learned this year is very crucial i guess,nop i am sure...
"I AM THE GOD OF MINE"

Leo kuriakose my roommate..

2010-12-20T23:05:00.000-08:00

I met him first when i moved to bangalore...i saw him first in my P.G!! ..a great friend and an open minded person. I learned a lot from him . He plays guitar and keyboard..i always feel the experience of staying with him will do good for me in the coming years..

2010-11-22T12:43:00.001-08:00

arun's Result: Along for the Ride

on quiz: What Kind of Employee are You?

You are pretty happy with your current job. It's not an easy profession,
but you don't stress about it. You watch as your fellow employees buzz
around you with so much to do. You take it all in stride, because you
know the secret. You just don't work that hard! You are well liked for
the most part because you have an easy-going personality. You need to be
nice, because that's the trick to get other co-workers to help pick up
your slack. You don't hide at work, well, you don't hide the good stuff
that you do. You make sure you do one good thing every so often and make
sure everybody knows about it. You are intelligent because it takes
some skill to make sure your boss sees you at the right time. 9 to 5 is
for those people that don't know how to do the minimum that needs to get
done so that you stay off the boss's radar screen.

Quiz Maker

Take this quiz & get your result

What Kind of Employee are You? » Quiz Maker

NANDI Hills ,bangalore

2010-11-21T01:11:00.001-08:00

Nandi hills is located in bangalore near the airport road(new airport).Place is really good for a couple of hour hangout....

NANDI Hills ,bangalore

2010-11-21T01:11:00.000-08:00

Nandi hills is located in bangalore near the airport road(new airport).Place is really good for a couple of hour hangout....