Let's SHARE

SERVICE ONLINE FREE; ALL PRINTER

2011-10-10T19:57:00.000-07:00

YOUR PRINTER TROUBLE :
SMS TO 081331067345/ write your comments

RUN OUT

PRINTER EROR

BLINKING

COMPUTER EROR; HANG; VIRUS; CORUPT; ETC

2011-09-26T20:44:00.000-07:00

YOUR COMPUTER TROUBLE:

AUTO UPDATE

BLUE SCREEN

SYSTEM SLOW

SEND ERROR REPORT

KEYBOARD ERROR

INFECTION VIRUS

SOLUTION FREE ALL TROUBLE >>>SERVICE ONLINE FREE >>> SMS 081331067345/COMMENTS/SHOUTMIX/SHARE

Resetter Epson L200

2011-04-25T16:02:00.000-07:00

Resetter Epson L200

How to Resetter Epson L200 :

Download Resetter Epson L200 (ekohasan password)

Resetter Epson L200 :
1. Turn On Espon L200
2. Run Resetter L200 >>> double click file "AdjProg cracked.exe"
3. Click "accept" >> "Particular Adjusment Mode" >> "Waste ink pad Counter reset" >> "Check" >> check mark "main pad counter, FL box counter, Ink tube Counter", so click "Initialization" >> "Finish".

4. Turn off.
5. Turn On

Resetter Epson L100

2011-04-10T15:25:00.000-07:00

Resetter Epson L100

How to Reset Epson L100
Resetter epson L100 download here :
http://www.ziddu.com/download/14080411/resetterL100.7z.html (ekohasan password)

Resetter Epson L100 :
1. Turn On Espon L100
2. Run Resetter L100 >>> double click file "AdjProg cracked.exe"
3. Click "accept" >> "Particular Adjusment Mode" >> "Waste ink pad Counter reset" >> "Check" >> check mark "main pad counter, FL box counter, Ink tube Counter", so click "Initialization" >> "Finish".

4. Turn off.
5. Turn On

Is Your Printer Ready for Windows 7?

2011-04-10T01:12:00.000-07:00

With Windows 7 officially available, complaints about lack of support for printers likely won't be far behind. But the good news is that you have a much better chance of moving your printer to Windows 7 without serious problems than you had going from XP to Vista. Granted, that's not a particularly high bar to clear, but after all the problems with printers and Vista, both Microsoft and most printer manufacturers have made an effort to make the move to Windows 7 easier. Judging by my tests, they seem to have succeeded. Unfortunately, that doesn't mean there isn't anything left to worry about.

It's important to understand that printers can have different levels of support in Windows 7. For a single-function printer, the first, and most minimal, level is the ability to print. Beyond that, a Windows 7 driver may or may not support such features as duplexing (printing on both sides of a page) or multiple paper trays.

For a multifunction printer (MFP)—also known as an all-in-one, or AIO—support may or may not cover other functions besides printing. HP, for example, says that for its AIOs, the drivers included on the Windows 7 disc and on the Windows Update site allow printing and scanning, but the scan support for network printers in many cases is limited to scanning over a USB connection. Also missing from the Windows 7 disc and Windows Update are things like fax drivers for those HP AIOs that include a fax capability, and bundled software that adds features like optical character recognition (OCR) to let you scan a document and turn the image into editable text.

Missing Pieces and Where to Find Them

Fortunately, you're not limited to the built-in support on the Windows 7 disc and Windows Update. HP also provides (or, depending on the printer, is planning to provide) Windows 7 updates on its own site for many of its printers, with full support—including such things as bundled software with OCR modules. What's true for HP isn't necessarily true for all companies. Microsoft says that the level of support available on the Windows 7 installation disc and on the Windows Update site differs from one manufacturer to another, and even from one model to the next for any given manufacturer.

What all this translates to is that if you want to know if your printer is ready for Windows 7, you have to not only ask if your printer will work with Windows 7 before you make the change, you should also try to find out whether it's fully supported and, if not, what you have to give up. It also helps to know whether you have to download an update to get the most support possible and, if so, from where.

You may not be able to find this additional information, but it's worth making the effort before committing to Windows 7. If you can't find a definitive answer, at least consider whether you're willing to give up some printer features.

Windows 7 Compatibility Center

A good place to start your research is with the Microsoft Windows 7 Compatibility Center. Under the heading Check the compatibility status of your software and devices, you can choose Hardware from the drop-down list, and then enter your printer model. This will either turn up a list of possible matches or show a single exact match. If your printer turns up in the search results, it will most likely have a green checkmark labeled 32-bit next to the name, with the notations Compatible and Learn more. Other possibilities include a big red X paired with the words Not compatible, and a lowercase i in a blue circle, with the words Information coming soon.

Some of the printers labeled as compatible will also include a Compatible with Windows 7 logo, which means they've passed Microsoft's compatibility tests. This doesn't necessarily mean that the driver supports all of the printer's features, but it does mean that the printer has passed Microsoft's tests for reliability and stability. In other words, it won't make Windows 7 crash.

Whatever the list says about your printer, click on the entry to see a page with more details. On the detail page, you can click on the 32-bit or 64-bit tab, depending on which version of Windows 7 that you plan to run. (If you not sure what the difference is, you can also move your mouse cursor over the text What's 64-bit? and click on Learn more in the description that pops up.)

Interpreting Compatibility

In most cases you'll find some additional information on the details page. However, there's one detail you should take with a large grain of salt. For compatible printers, you'll see the green check with the Compatible label again, along with a note saying either No action required or Free download required. If it says the former, ignore it.

The problem is that No action required doesn't necessarily mean that you don't have to take any action to get full support for your printer. It only means that the Windows 7 disc, Windows Update, or both include drivers with minimal support for printing and, for AIOs, scanning. As I've already pointed out, these drivers may not support all of the printer's features. You may still have to go to the manufacturer's Web site to download full support, or at least additional support, if it's available.

The detail page for any given printer typically includes a link to the manufacturer's Web site. Depending on the manufacturer, you may or may not find additional information on the site, but you should follow the link to find out. Whatever you do, if the detail page says No action required, don't take it at face value.

Keep in mind too that the information in the Compatibility Center is not definitive. Microsoft points out that it updates the information every two weeks. The detail pages even ask users to vote Yes or No on whether the information is accurate, and other pages ask users to let Microsoft know if something's missing. One of the printers I installed for my tests, for example, isn't on the list at all, but it worked without problems. And it took me only a few minutes to find three HP printers that are marked as not compatible, even though HP offers Windows 7 drivers on its Web site.

The point here is that if your printer earns a green check in the Compatibility Center, it's probably safe to assume it will work, but not necessarily with all the features you're used to. If it isn't listed, however, or is marked as not compatible, don't stop there, because it may work anyway. Ultimately, you may have to try installing it yourself to find out. For details on how to do that, take a look at 7 Windows 7 Printer Installation Tips.

http://www.pcmag.com/article2/0,2817,2356157,00.asp

Fixing Error Code 241 Paper Jam on Lexmark printers

2011-04-07T13:35:00.000-07:00

Fixing Error Code 241 Paper Jam on Lexmark printers

Solution 1:

- Take tray out.

- Lift up so have access to bottom of printer.

- The 2 rubber rollers in the middle can be taken off

- Flip them inside out and put them back on and put tray back in.

Solution 2:

Take out paper tray 1.
Remove any jammed sheets of paper you find there.
Once you have done this, reinstall the paper tray and try printing again.
If the printer jams again with a 241 Paper Jam error message, look to see if it has tried to feed a sheet of paper out of the tray.

If paper is not leaving the tray and no paper appears to be jammed anywhere in the printer, remove paper tray 1 once again. Make sure the paper is loaded correctly in the tray. With the tray removed, you can also check the feed/pick rollers. Do the following:

Look into the printer where the tray goes.
Look for two tan-colored rubber rollers (circled in green in the picture below). These are the rollers that grab and feed the paper up into the printer.
Clean off the rollers with a dry cloth and try printing again.
If the printer still will not pull any paper, your feed rollers may be worn. As a temporary fix, you can try flipping the rubber feed rollers inside out. Remove paper tray 1 again and carefully remove the rubber tire off each of the roller wheels. Then flip the rubber tire inside out and put it back on the wheel.
If either step 3 or 4 fixes the problem, your feed rollers are worn and will eventually need to be replaced. However, you should be able to continue to use the printer temporarily.
If the paper still does not feed at all, the feed motor to tray 1 may not be feeding the paper. In this case, the printer will require service.

If paper is feeding out of the tray but getting jammed, you may be able to pinpoint the source of the problem by taking a close look at where the leading edge of the paper is stopped.

If the paper is getting jammed right at tray 1, a small piece of paper may be stuck in one of the rollers at the front of the printer. Do the following:

Remove paper tray 1.
Look into the printer where the paper tray goes. Look upwards into the very front of that area. You should see a slot or guide where the paper will go once it is fed out of the tray. Towards the left-hand side, there is a set of feed rollers. A small piece of paper can get wrapped around one of the rollers here.
If you see a small piece of paper stuck in one of these rollers, try to remove it.
If you cannot reach it or it cannot be removed, the assistance of a service technician will probably be needed.

Note: To complete steps 1-3 above, it may help to lay the printer on its side. If you do this, please use caution when lifting the printer. Remove the toner cartridge and the paper tray before setting the printer on its side. Also make sure the printer is powered off and unplug any and all cords, especially the power cord, going into the printer. Refer to the photos below for guidance on where to look into the printer for the feed rollers. The rollers are located in the area of the printer highlighted by the yellow circles.

If the paper is getting past the front of the printer and jamming elsewhere with a 241 Paper Jam error, do the following:

Look for any obstructions at the leading edge of where the paper is jamming.
If you are not able to find (and remove) any obstruction, the printer will probably need service to isolate the problem and replace the failing component.

Another way you can find out if your printer will require service for this issue is to obtain the secondary codes for the paper jam error. To do this:

As soon as you receive the 241 Paper Jam error message, press and hold the Return button.
While holding down the Return button, press the Select button. Two lines of numbers will appear on the printer screen. These are the secondary codes.
If the top line of the secondary code is 8E XX 06 X1 (where X can be any letter or number), the problem could be with the pick motor for tray 1. This will probably result in the printer needing service.

If you continue to receive the jamming error after checking all of these possibilities, the printer may require service.

How to solve error C000 on Canon Pixma MX870

2011-04-06T08:30:00.000-07:00

How to solve error C000 on Canon Pixma MX870

Solution 1:

Switch off the printer
Disconnect the power cable
Open door:
Remove the orange protective tape (A) and remove the white polystyrene (protective equipment) (B).
Verify in the printer there is no protective equipment:
Close the door.
Connect the cable and switch on.

Solution 2 :

- Check for any foreign body in the printer: piece of paper, paper clip...

- Check for any paper jams.

Solution 3:

- This error code C000 could be made by an empty cartridge: check for this.

Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC

2011-04-04T08:44:00.000-07:00

Product Description

This 7 port USB hub should be the easiest and fastest way to connect all your USB devices to PC, laptops. 7 high-speed ports can connect to an almost limitless number of USB devices including modems, scanners, printers, PC cameras, digital cameras, keyboards.Specially designed for space-saving function and multi-connection convenience. Each port handles up to 480Mbps; these devices are fully hot-swappable and daisy-chainable up to 127 devices. The LEDs help color-code your USB devices and ports. Plug this hub into just one of your computers USB ports and you'll add 7 extra USB ports to your computer. This USB 2.0 7-port hub gives you more flexibility of connections. It comes with an AC power adapter so you can run devices like external drives, printers.

Product Details

* Brand: HDE

Features

* USB 2.0 and USB 1.1 compliant and USB-IF certified. Supported data speed: 1.5/12/480 Mbps. One upstr

* 8 luminescent LED lights. USB Powered. Over-current detection and protection for each downstream por

* Hot-swappable plug & play connection. Daisy-chain connection of up to 127 devices. Dimensions: 100 x

* Work with Windows 98/NT/2000/ME/XP. Package content: 1 x hi-speed 7-port hub with led lights, 1 x US

RESETTER EPSON T13

2011-03-23T15:47:00.000-07:00

How to Reset Epson T13

Download driver epson T13

Download Resetter Epson T13

Note : Date not change

Double click "AdjProg.exe".

Follow the following picture :

Turn off
Turn On

How to Reset ink counter on Canon MP198

2011-02-28T09:33:00.000-08:00

A. Entering into service mode

Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
Still holding the power button, Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
After the display is 0, attach the printer UDB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B. Resetting Ink counter on the Printer

Run “service_tool 1050.exe”. you can download the service tool software from this link: ServiceTool_1050.zip

Confirm detected USB-port numbers on USB port column.
Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.
Click “platen button” on the “Clear ink counter” section. The printer will print again.
Turn off the printer and then turn the printer on.

This work too with: MP258, MP276, MP496, MP558, MP568, and MP648

Reset waste ink Canon Pixma MP210

2011-02-18T06:33:00.000-08:00

How to reset waste ink pad on Canon Pixma MP210

Error 5b00 means the waste ink counter is full, you need to reset it.

Solution:

Step 1: Download PCM Service tool.

Step 2: Enter in service mode in order to used the re setter:

Turn off the printer without pulling the power cords.
Hold down Resume button and press Power button
Keep holding down Power button and let Resume button go
Then Press Resume button 5 times then let both buttons go
The Alternate Blinking error is gone, the printer is in Service Mode state

Step 3:

Extract the PCM servive tool resetter and then double click "servicetool.exe"
Click Reload Button and you will get a new USB port.
Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
Then press "EEPROM" button and the printer will print some text, after that click OK
Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.

Error 0x61011beb on HP Officejet and Photosmart printers

2011-02-15T07:40:00.000-08:00

Solution 1:

With the printer power on, disconnect the USB cable from the computer.
Remove the ink cartridges
Unplug the power cord. Wait for at least 1 minute. Plug the unit back in (press the power button if necessary)
Wait for the "Insert Cartridges" message. Reinstall the cartridges

Close the product doors
If you receive a recalibration message, allow the printer to complete this task
Reconnect the USB cable
Try your print job again

Solution 2:

Plug it directly into the wall, rather than into a UPS.
Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
Wait 30 seconds.
Plug in the power cable to All-in-One and also to wall outlet.
Check for the functionality.

Solution 3:

Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.
Then, press and hold # and 6 while plugging in the power cord.
Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One

How to reset waste ink pad on Brother DCP 770CW

2011-02-14T06:49:00.000-08:00

How to reset waste ink pad on Brother DCP 770CW

Solution for "Error 46 Unable to Clean":

Enter machine maintenance mode. FAX models with numerical keypads: Press the Menu/Set, *, 2, 8, 6 and 4 keys within two seconds. (if you fail to complete the correct key sequence within two seconds, press the Stop key to try again).

Other (non-FAX) models: Press the Menu/Set and Black Start keys. Next press the “up arrow” key four times to enter the maintenance mode).

Press the 8 then 0 keys in the initial stage of the maintenance mode to call up the machine’s log information list (function code 80).

Press the Black Start key several times to scroll through the log information list to reach the purge counter. The purge counter is the 25th item in the list.

Press the 2, 7, 8, and 3 keys in this order to reset the purge count to zero.

Press the Stop/Exit key to return to the initial stage of the maintenance mode.

Press the 9 key twice to return to the standby state.

EPSON T13

2011-02-07T18:44:00.000-08:00

Why the Epson Stylus™ T13?

Epson Stylus™ T13 is your perfect and customised desktop printing partner.

Water, smudge and fade resistant prints with Epson DURABrite™ Ultra Ink

Epson DURABrite™ Ultra Ink, an all-purpose ink for everyday printing, delivers vibrant prints that last. Superior printing quality is now possible with this revolutionary smudge and water resistant ink.

Save more with Epson INKdividual™ Cartridges

Enjoy greater savings with Epson cost effective INKdivdual™ cartridges. You can now maximise usage of your ink cartridges when you replace only the empty cartridge.

Superior print speed for tight schedules

With a print speed of up to 28 pages per minute, you cut down significantly on waiting time. Printing has never been this efficient and easy.

Unsurpassed print quality

With a high resolution of 5760dpi, expect exceptionally high, photo-quality prints. In addition, it allows you to create and produce borderless photo prints for all your creative needs.

Achieve photo perfection with Epson Creativity Suite

Create professional and impressive photos and presentations with Epson’s dynamic, user-friendly photo editing and enhancement software, Epson Creativity Suite. You can now achieve photo perfection with the following functions:
- Red Eye Correction
  
  Eliminate red eye effect and create professional photos instantly with just a click of a button.
- Epson PhotoEnhance
  
  Deliver beautiful and natural photo prints by adjusting the skin tones, colour casts and exposure levels.
- Epson Easy Photo Print
  
  Achieve photo lab quality prints in just 3 steps with this easy to use software.

Reset Canon Pixma MP520

2011-02-07T00:48:00.000-08:00

How to reset waste ink pad on Canon Pixma MP520

Solution for error code 5B00:

Switch the printer OFF
Press buttons 1 + 2 + 3 and 4 (simultaneously using four fingers). See picture bellow
Keep pressing this four buttons for 10 seconds
Release the On/Off button (number 4) (Keeping pressing the others)
After a few seconds (when the printer go ON) you can release buttons 1, 2, 3

Reset Counter Epson RX600, RX620 and RX630 | Free Resetter Indo

2011-02-05T15:59:00.000-08:00

Reset Counter Epson RX600, RX620 and RX630

Resetting RX600, RX620 and RX630 using adjustment program and manual reset. Adjustment Program RX600, RX620 and RX630 work under win98, WinME, Win 2K and Windows XP. This adjustment does not require date setting.

Resetting Counter on Epson RX600, RX620 and RX630 Using this Adjustment Program

Run the software and Set the adjustment setting and equal to the printer, Click Ok
Click maintenante tab
Check waste ink pad counter then click reset to reset the counter.

Manual resetting Epson RX600, RX620 and RX630

Press all following buttons : Power, B&W, Color,
Then, on demand (you'll see message on printer screen), turn off printer.

Download Adjustment Program Epson RX600, RX6 2 0, RX630

Blue Screen Errors

2010-11-24T01:47:00.000-08:00

Blue screen errors, or blue screen of death (BSOD) errors, are the most severe errors Windows can encounter. Since Windows can not recover from this kernel level error, a blue screen is displayed with the error details. The error details contain a STOP error code, which indicates the type of error.

There are a lot of possible causes for blue screen errors, but most of them relate to the computer hardware. The cause of a BSOD error can be a temperature problem, a timing error, a resource conflict, hardware failure, a corrupt registry, a virus or simply a device incompatibility or driver error.

How to analyze blue screen errors

The first thing to do to analyze a blue screen error is to check the meaning of the STOP error code. You need to stop Windows from rebooting when a STOP error is encountered. Once the blue screen of death is shown, you can check the meaning of the STOP error code. Together with the filename of the driver or module, this will give an indication of the error cause.

Another option to analyze the cause of the blue screen error is to look at the Windows system event log or to debug the memory dump (minidump) that Windows created when the error occurred. The event log can be viewed using the event viewer. Right-click Computer in the Start menu, and then select Manage. In the Computer Management window select Event Viewer. The information in the event log can be of great help to isolate the cause of the blue screen error.

Reading the minidump requires a bit more technical knowledge, but Microsoft has tools to read the minidump.

The most common cause of blue screen errors

In reality, the most common cause of blue screen errors is a device driver problem. Outdated, incorrect or corrupt drivers can cause the system to encounter a STOP error, resulting in the BSOD.
So the easiest way to try and fix a blue screen error is to reinstall and update your system’s device drivers. This will ensure that all driver bugs are fixed and that all hardware has the correct driver.

If you know which device caused the error, you can update or reinstall that driver first. The file name in the blue screen of death can help identify the driver. Look for a file with the .SYS extension and search for that file name.

If you do not have the drivers for all devices, or are not comfortable updating your PC’s drivers manually, you can use a driver update tool to find, download and update all device drivers for you. Such tools will accurately identify your computer hardware, including any device causing an error, and automatically install the latest drivers for it.

In most cases updating or reinstalling drivers will solve your blue screen errors.

Other causes of blue screen errors

However, if updating device drivers does not fix the blue screen error, there are a number of additional things to try:

Load the default BIOS values – resource conflicts and timing issues can be caused by incorrect BIOS settings.
Update the BIOS – especially after adding new hardware or installing a Windows service pack this can help fix issues.
Update Windows – missing updates, including service packs can be a source of stop errors.
Check your system – run a virus scan and spyware scan after updating your definition files.
Run a memory test to check your computer’s RAM. Memory faults can easily cause blue screen errors, so see if your RAM is error free. Vista and Windows have a built-in option to test the memory, for XP you can use a program called memtest86.
Driver rollback – if you have recently updated a driver, you can use the driver rollback to revert back to the previous driver version.

List of STOP Errors Causing BSOD:

Stop 0×00000003 UNSYNCHRONIZED_ACCESS
Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
Stop 0×00000023 FAT_FILE_SYSTEM
Stop 0×00000024 NTFS_FILE_SYSTEM
Stop 0x0000002E DATA_BUS_ERROR
Stop 0x0000003F NO_MORE_SYSTEM_PTES
Stop 0×00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
Stop 0×00000050 PAGE_FAULT_IN_NONPAGED_AREA
Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
Stop 0×00000073 CONFIG_LIST_FAILED
Stop 0×00000074 BAD_SYSTEM_CONFIG_INFO
Stop 0×00000076 PROCESS_HAS_LOCKED_PAGES
Stop 0×00000077 KERNEL_STACK_INPAGE_ERROR
Stop 0×00000079 MISMATCHED_HAL
Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
Stop 0x0000007B INACCESSIBLE_BOOT_DEVICE
Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
Stop 0x0000009C MACHINE_CHECK_EXCEPTION
Stop 0x0000009F DRIVER_POWER_STATE_FAILURE
Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
Stop 0x000000C2 BAD_POOL_CALLER
Stop 0x000000C4 DRIVER_VERIFIER_DETECTED_VIOLATION
Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
Stop 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
Stop 0x000000DA SYSTEM_PTE_MISUSE
Stop 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
Stop 0x000000FE BUGCODE_USB_DRIVER
Stop 0xC0000218 UNKNOWN_HARD_ERROR
Stop 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
Stop 0xC0000244 STATUS_AUDIT_FAILED

Please share your own experiences with blue screen of death errors, including possible solutions. New insights can help others, or maybe we can help you with specific STOP errors.

Power Supply

2010-10-18T21:42:00.000-07:00

POWER SUPPLY >>> PSU
The power supply is the componet at the rear of the PC that the powr cord plugs into. The inside consists on a numerous wires that plug into the motherboard and other devices, such as the hard disk drive, optical drives, floppies and even video cards. The power supply will normally either work or not work. This article will show you how to determine if the power supply is the cause of your computer problems.

The power supply can partially fail, completely fail, or even fail intermittently. The PSU can cause a myriad of problems and can frustrate computer users who are not use to dealing with this temperamental component. This tutorial will help you diagnose problems with the power supply to determine if it is time to replace the unit. Links to the tools we talk about can be found on this page.

To begin, is the power supply working? Just because the computer isn’t powering up, doesn’t mean the power supply isn’t doing its job. Is the fan on the back spinning?

When troubleshooting power supply issues, you first make sure you have the correct voltage set on the rear of the unit. You should see a red switch that can be set to 115V or 230V. Depending on the country you live, this switch will need to be set appropriately. For instance, the Unites States uses 115V. Secondly, make sure you are not plugging into a power strip. Power strips can fail, so be sure to try plugging the power cable directly into a working, properly grounded wall outlet.

If you’ve been working inside the case, check the thin power wires running from the front of the case to the motherboard. These generally plug into the motherboard at the lower right of the motherboard and may be labeled something like “power sw” or “pw switch.” If this wire has popped off, the PSU will not work. To test the switch, you can remove the “power sw” wire and short the pins by touching a flathead screwdrive to the two pins. If the switch is bad, the computer should power up right away. There is also the main motherboard connector, which is the long 20 pin connector. Make sure this is properly secured. Some graphics cards or motherboards also require an addition 4-pin wire connector. If you motherboard requires it, be sure this is plugged in to the appropriate socket.

Use a multi-meter or stand alone power supply tester to check the PSU. To test with a multi-meter, make sure the power supply is plugged in to a power source and that the 20-pin connector is plugged into the motherboard. It’s best if you lay the case on it’s side so you can look directly down on the motherboard. Next, you’ll jam the black lead down into any of the black (ground) wires. Then you can probe each colored wire for the appropriate voltage. If voltage is seriously out of range or does not exist, then the power supply is bad. The colored wires should have the following voltages:

The pin-outs for an ATX power supply
Pin# Color Function 1 Orange +3.3V DC 2 Orange +3.3V DC 3 Black Ground 4 Red +5V DC 5 Black Ground 6 Red +5V DC 7 Black Ground 8 Gray Power OK 9 Purple +5V standby 10 Yellow +12V DC	11 Orange +3.3V DC 12 Blue -12V DC 13 Black Ground 14 Green PS-ON 15 Black Ground 16 Black Ground 17 Black Ground 18 White -5V DC 19 Red +5V DC 20 Red +5V DC

An alternative to the multi-meter is the stand-alone power supply tester. This small device plugs directly into the 20-pin connector of the power supply. It will immediately tell you if the power supply is bad. These are cheap and easy to use.

If you are not getting power, or if your system randomly reboots or develops bizarre symptoms that you cannot nail down, consider swapping in a new power supply. Spending too much time trying to diagnose a flaky power supply could become expensive, as unexpected dip in power can damage other computer parts, such as the hard drive.

Blue Screen of Death Errors

2010-07-23T02:02:00.000-07:00

Blue Screen of Death Errors

Any frequent Windows user has encountered the big bad BSOD, short for the Blue Screen of Death. This common error will make its presence known whenever the system senses that an application, piece of hardware or device driver is experiencing issues behind the scenes. What makes this particular issue so tricky is that it can be an indicator of anything from a minor glitch to a major error that causes your system to malfunction and leave you staring at the infamous blue screen.

On rare occasions, getting rid of a blue screen error is as simple as rebooting the system. Some have been lucky enough to restart their PC and never encounter the problem again. Unfortunately, this error usually means that your system is suffering from a critical error and when this is the case, it will not go away until you address the matter.

There is no standard solution to fixing the blue screen problems, mainly because there are so many problems that can result in such an error. This could be anything from a new program you just installed to a memory stick you added to the computer. In order to eliminate this nuisance, you must first diagnosis the problem to find out what’s actually going on. By doing a little troubleshooting, you can narrow things down and actually find the culprit.

Check Software and Hardware Components

The easiest step to eliminating blue screens is uninstalling any new software or hardware recently installed on the machine. If you encountered the problem after adding on a new component, this is likely the source of your problem. This could be due to a failed installation or incompatibility issues related to the software or a driver the device needs to function.

Check Your Memory Status

Blue screen errors could also appear if you recently added more RAM to your computer. You can find out if your RAM is faulty by running a diagnostic utility. If you don’t have such a tool handy, you will have to get more hands on by opening the computer case and removing the stick of RAM you just installed. From there, you can fire up the machine to see if the blue screen still shows up. This is actually easier than it sounds, but if you don’t feel comfortable opening your computer find yourself a professional technician who won’t charge an arm and leg to do the job.

Fix the Registry

The Windows registry is one of the most common causes of the BSOD. Over time, the registry gets cluttered with invalid files and other unwanted items that can make your system unstable. A blue screen of death occurrence is the ultimate sign of instability. You can run a registry cleaner to find out if the registry is stirring up all the trouble on your PC. These programs are fairly inexpensive and have the ability to automatically detect and remove the questionable items hiding out on your PC.

Conclusion

When the blue screen of death shows up, it will be accompanied by a STOP code that gives details on what caused the problem. Be sure to jot down this information when troubleshooting to better your chances of successfully fixing the issue.

WASTE INK ABSORBER CANON IP1000

2010-05-05T00:13:00.000-07:00

Waste ink absorber is full Canon Ip1000 and IP1500

The steps for reseting "Flow Ink Glutted" job at iP1000

Travel 1: Guide for Serving modality (1st method)
1. Undo Land and USB cables.
2. Lawless entry, Count and Suppress the Powerfulness fix.
3. Tie the Land telegram.
4. Chummy entryway, then issue Force fix.
5. Land ON your printer a familiar (It should not nictation anymore)

Quantify 1: Guide for Function way (2nd method)
1. Undo Noesis and USB cables.
2. Weightlifting and Curb the Superpower button,
3. Infix the Superpower cablegram.
3. Achievement the the Force add
4. Country ON your machine a common (It should not nictation anymore)

Quantify 2 : Software for Permanant (1st method)
1. Reconnect the USB conductor and flop ON your Printer
2. Give "Pandemic Tools for iP1000",
http://www.printersiam.com/data/download/iP1000%20Service%20Tool.zip
3. Superior (USB Left)
4. Prefer (SET End 1)
It should be reseted already, but somehow it play nictitation again if you e'er unpluging AC Quality video. So try the 2nd method by using ServiceTool for IP1500

Block 2 : Software for Permanant (2nd method)
1. Reconnect the USB conductor and separate ON your Machine
2. Unlawful "Miscellaneous Tools for iP1500",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
3. Select (USB Embrasure)
4. Opt CLEAR Activity INK Calculator - Water
5. Take Realize Wild INK Sideboard - PLATEN
It should be working, coz my printer now now operate normally

CANON BJC1000, WASTE INK TANK

2010-05-05T00:04:00.000-07:00

Waste Ink Tank Reset Procedures Canon BJC 1000 Series

Canon Waste Ink Tank Reset Procedures

1: Remove Cartridge2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within
5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.