Smith Enterprise, Inc.

Artur Tests SEI Steyr AUG Muzzle Brake

noreply@blogger.com (Smith Enterprise, Inc.) — Fri, 30 Dec 2011 01:13:00 +0000

Check out this great video showing how effective the SEI Good Iron Muzzle Brake is on the Steyr Aug-Z A3. Artur is shooting .223 Remington ammo in the video.

Smith Enterprise on Display

noreply@blogger.com (Smith Enterprise, Inc.) — Fri, 30 Dec 2011 01:08:00 +0000

Look at this great picture of Ron, Andy, and Caesar that was taken by Gary Paul Johnston of Shooting Illustrated Magazine. Ron is holding the SEI Crazy Horse M21A5 with a Leupold Scope. Everything on the weapon is SEI-made. Andy, who is an Iraq War Vet, and Cesar are holding receivers SEI makes for the M14. On the table are Vortex's for the M2 .50 Cal and various other weapons. You can't get any products better than these for your military and civilian weapons.

Ron Smith is Now Part of TACOM "Dime Club"

noreply@blogger.com (Smith Enterprise, Inc.) — Fri, 30 Dec 2011 00:28:00 +0000

When Ron Smith went to TACOM earlier in 2011 he was tested. He had to shoot a dime at 110 yards. This is very difficult to do. Not that many people are part of the "Dime Club" accept for the guys at TACOM. So on the second shot, Ron nails the dime at 110 yard with M118LR ammunition shooting a TRW that Ron dialed in there and was giving them some trouble. The ding on the rim is from when the dime hit the ground. Ron was there with Lee Emerson, Doug Carlstrom, and Mike Petersen.

David Winters of USSOCOM Sent us a Pics of the SEI Vortex and Wounded Warriors

noreply@blogger.com (Smith Enterprise, Inc.) — Thu, 01 Dec 2011 21:20:00 +0000

Here is the email that Dave sent our Federal Supply Coordinator John Bainer:

John,

Hope all is well with SE! I took some time and took pics of our BlackDagger M4s with your SE flash hiders (they work great).

I also added a pic of our SOF Memorial (10-11-11) and some SOF heroes. Thought you would enjoy!

http://blackdaggermhc.org/

Dave

Here are the pictures Dave sent showing our Vortex and also some of our heroes:

SEI Rolls Out New Tool Pouches

noreply@blogger.com (Smith Enterprise, Inc.) — Thu, 01 Dec 2011 21:13:00 +0000

If you need the perfect tool pouch that is the perfect size, this is your kit. This kit can fit all of the larger tools for serious armorers and it can also fit the smaller cleaning kit tools for the basic rifleman. Our basic kit is about $60 retail and does not come with any attachments. You can purchase the attachments seperately, however. Available in Black, Tan, OD, and Multi Cam.

Experienced Security Trainer Gives the Good Iron Muzzle Brake Rave Reviews

noreply@blogger.com (Smith Enterprise, Inc.) — Tue, 22 Nov 2011 22:21:00 +0000

We recently were sent a video about our M4/M16 Good Iron Muzzle Brake from Steve Cooper from Paladin Training... We appreciate email like this and hope you enjoy watching the video.

Here is the email:

Siror Madame,

Irecently installed an SE muzzle brake on a 16” 5.56 AR and wanted you to knowhow pleased I am with the way it performs. Muzzle rise and felt recoilare noticeably dampened, but w/o any apparent increase in sound or back/sideblast to my surprise. Everyone comments that it’s the least obnoxiousbrake they’ve seen.

Youmight be interested in a video of the brake in use here: http://contour.com/stories/urban-break-contact-carbine-class-test-run-paladin-training-inc

Irarely write letters of this sort, but then I’m rarely 100% satisfied with whatI buy these days, as I am w/ your muzzle brake.

Thankyou.

SteveCooper, Director of Training

PaladinTraining, Inc.

See Our Precision Manufacturing Equipment Make Vortexes Our of Barstock

noreply@blogger.com (Smith Enterprise, Inc.) — Wed, 19 Oct 2011 22:51:00 +0000

In this video you can see this machine cut away from barstock steel in order to form the grooves on the Vortex Flash Suppressor. As you can see, this is no easy task and requires a great deal of precision.

In this video you can see this machine cut away from barstock steel in order to hollow out the coupler portion of the Vortex .50 Cal Flash Suppressor. As you can see, this is also no easy task and requires a great deal of precision.

Riflecraft Goes to DSEi UK With SEI Vortex on Their .50 Cal

noreply@blogger.com (Smith Enterprise, Inc.) — Fri, 07 Oct 2011 23:48:00 +0000

Our good friend and partner Riflecraft UK sports the SEI .50 Cal Vortex at the DSEi UK exhibition this year. This trade show has over 1,200 exhibits and 25,000 attendees on average. Also, the booth behind Riflecraft is LWRC, another good friend and partner of SEI.

Kevin Young Sends Pictures of His M14 EBR Crazy Horse Collection

noreply@blogger.com (Smith Enterprise, Inc.) — Fri, 07 Oct 2011 23:40:00 +0000

Here are some more great pictures from TheH2OMan Kevin Young. Notice the SEI Vortex and Wind Talker on these M14s Crazy Horse and EBR variants. Check out TheH2OMan's Youtube Channel also.

Please Follow Us on Twitter

noreply@blogger.com (Smith Enterprise, Inc.) — Sat, 24 Sep 2011 03:21:00 +0000

Many people use Twitter to follow short and sweet new updates and links about things they are interested in. If you have a Twitter account, please follow us. Here is the link to our Twitter account.

Please "Like" Our Facebook Page

noreply@blogger.com (Smith Enterprise, Inc.) — Sat, 24 Sep 2011 03:18:00 +0000

Our Facebook Page is brand new. We invite you to join our Facebook so you can stay up to date with our latest articles, pictures, and news announcements. We come out with new technologies every day and would love to share this with you. Here is a link to our Facebook.

MK46 Locking Collar (Patent Pending)

noreply@blogger.com (Smith Enterprise, Inc.) — Sat, 24 Sep 2011 03:07:00 +0000

Below are some pictures that better explain our MK46 light machine gun locking collar. In the pictures below it is a silver color. However, our finished product is the same color as the Vortex. The locking collar help stabilize the flash suppressor when a high rate of fire is used. It adds support to the Vortex and is a very helpful addition to the SEI weapon-related patented arsenal.

SEI Armorer's Toolkit

noreply@blogger.com (Smith Enterprise, Inc.) — Sat, 24 Sep 2011 03:01:00 +0000

Here are some pictures of our armorer's toolkit. It is a very handy tool for any military armorer or weapons smith. It is also very rugged.

Lee Ermerson from TACOM Writes about SEI's Involvement in the MK 14 MOD 2

noreply@blogger.com (Smith Enterprise, Inc.) — Tue, 20 Sep 2011 20:24:00 +0000

Lee Emerson from TACOM made a post on the EBR SOPMODs forum discussing SEI's recent purchase from CRANE for 245 each of MK 14 Mod 2 components. Here is what Lee had to say:

"I've been in contact recently with NSWC Crane and Smith Enterprise, Inc. regarding a new project, the Mk 14 Mod 2. Here's what I've been told.

The first two protoype Mk 14 Mod 2 rifles were built in April 2011 at NSWC Crane using existing M14 SSR rifles. Another prototype in final configuration was finished this month. The Mk 14 Mod 2 is intended for Navy Expeditionary Combat Command units.

Per discussion with Ron Smith, Smith Enterprise, Inc. has been awarded a contract to supply 245 sets of the following SEI parts within two months to NSWC Crane in support of the Mk 14 Mod 2: extended bolt lock, direct connect Vortex (R) flash hider, gas cylinder, gas piston, gas cylinder lock wrench, and cleaning rod guide sized for the direct connect flash hider.

In addition to the parts supplied by Smith Enterprise, Inc., the Mk 14 Mod 2 will be assembled with the Sage International, Ltd. M14ALCS/PMRI-H stock with gray anodizing, black hand guard and vertical butt adjustment, AN/PVS-27 night scope, Nightforce NXS 3.5-15X day scope, Nightforce ultralight 1.125 " rings, X-treme Shooting Products, LLC steel trigger shoe and Atlas bipod (model BT10). These rifles will be built on existing Navy M14 SSR rifles. The M14 SSR has a NSWC Crane design scope mount. Thus, there will be no iron sights for the Mk 14 Mod 2. Dave Armstrong, NSWC Crane, informed me that the heavyweight barrel will be retained. The weight of the Mk 14 Mod 2 is in excess of 13 pounds without the magazine, optics or bipod."

Read This Great Article on the M14 Crazy Horse

noreply@blogger.com (Smith Enterprise, Inc.) — Tue, 20 Sep 2011 20:17:00 +0000

This article was written by Peter G. Kokalis several years ago, but many of the great concepts and products on our Crazy Horse are still the same. We have made some improvements and changes over the years, but this article and the pictures are definitely worth reading and looking at.

LWRCI Puts the Good Iron Muzzle Brake on Their REPR Rifle

noreply@blogger.com (Smith Enterprise, Inc.) — Tue, 20 Sep 2011 19:25:00 +0000

Smith Enterprise is teamed up with LWRCI to provide a superior rifle that is lightweight, versatile, and accurate. LWRCI is now adding the SEI Good Iron Muzzle Brake to Rapid Engagement Precision Rifle (REPR) Platform. Here is a link to the specs of this great rifle. Below are some pictures of the rifle equipped with our Good Iron Muzzle Brake. The more time goes on, the more weapon manufacturers, the military, and gun enthusiasts are realizing is that you can't do better than the SEI Good Iron.

Check Out Our New Products: Steyr AUG Vortex Flash Eliminator and Good Iron Muzzle Brake

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 02:26:00 +0000

We are rolling out new products on a weekly basis. Below are some pictures of two new products we provide. We now make a Vortex and Good Iron for the Steyr AUG. Notice the jam nut which help customize the angle your Good Iron Muzzle Brake and Vortex Flash Suppressor are facing. The thread pattern is 13 mm x 1 mm left hand twist.

MK48 Vortex and BFA Pictures

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 02:13:00 +0000

Here are some good pictures of our MK48 7.62 mm Vortex Flash Eliminator with its Blank Firing Adapter (BFA).

Pictures of the BFA for the MK46 Vortex Flash Eliminator

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 02:07:00 +0000

Below are some pictures of the BFA for the MK46 Vortex Flash Eliminator.

More Pictures of Our MK46 Vortex Flash Eliminator P/N 1040V

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 02:04:00 +0000

Below are some more pictures of the MK46 Vortex Flash Eliminator. Please take note of the patent pending locking collar that allows the Vortex to be customized to the tightness preference of the operator.

Our New BFA for the M249 Heavy Vortex

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 01:57:00 +0000

Now that we have updated our M249 Vortex, we also updated the Blank Firing Adapter (BFA) to fit the new style. This BFA will only work with the Vortex ans is must more effective than the GI Issue BFA. Here are a few pictures.

Here is Our New Heavy M249 Vortex Flash Eliminator

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 01:54:00 +0000

Our M249 Vortex used to be about the size of the M4 Vortex. However, we decided that we wanted to beef it up to make it more closely aligned with the M240 Vortex. So these are some pictures of the newer, more ruggedized, M249 Vortex Flash Eliminator.

Some Close Up Pictures of our M240 Blank Firing Adapter (BFA) P/N 1024

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 01:34:00 +0000

Here are some pictures of our BFA for the M240 P/N 1024 mounted on a Vortex P/N 1001AV and some by itself. This BFA is the most effective and has been hardened to combat specifications. It is way better than the GI Issue BFA. This BFA will only work with the SEI Vortex for the M240 (P/N 1001AV). There are several different angles to give you a better idea of what it looks like.

More Pictures of Our M240 Vortex Flash Eliminator P/N 1001AV

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 01:07:00 +0000

Here are some more pictures of our tried and true Vortex Flash Eliminator for the M240 Machine Gun

Some Close Up Pictures of our M4 Blank Firing Adapter (BFA) P/N 1015

noreply@blogger.com (Smith Enterprise, Inc.) — Mon, 19 Sep 2011 00:51:00 +0000

Here are some pictures of our BFA for the M4 mounted on a Vortex P/N 1001V. This BFA is the most effective and has been hardened to combat specifications. It is way better than the GI Issue BFA. This BFA will fit on the GI Issue bird cage as well as the SEI Vortex for the M4/M16 (P/N 1001V). There are several different angles to give you a better idea of what it looks like.