ROLL FORMING MACHINE

Roll Forming Machine

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Thu, 28 Jan 2010 19:36:00 +0000

Basic Roll Forming

Cold rolled steel forming possible ways of folding, such as milking the roll forming, stamping, which depends on the shape of the work required. The forming to recommend this article. The process includes forming Roll Forming by this method can have several pieces forming a chain.

1. Basic Roof

2. Trough

3. Ceiling

4. Purlin

Roll Froming Specification

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Mon, 23 Nov 2009 06:42:00 +0000

ROLL FORMING MACHINE

Technical Data For Machine Bolt Type

Step Forming     22 Step

The roller material    : S45C or SCM41

The frame material   :   SS400

The shaft material     :   S45C  or SCM41

Motor drive             :   15 Hp 380v 50Hz. 3 Phase

Spocket drive          :    RS 60 x 1 Hardness teeth

Cutter blade material :   DC53 or SKD11 Hardness 60 HRC.

Hydrulic power Unit   :   15 Ton for Cutting

Speed of Machine    :   22 m./min (max. speed)

Capacity of Product :    5000 m3 / day

Warranty

1 year warranty for use when started.
In case of problems. Officer will send within 2 days for mainten

Molding

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Mon, 23 Nov 2009 05:53:00 +0000

Specification Of Crimp Curve Molding

Description T x W x L Units

Dimension Upper Crimp Curve Molding: 20 x 83 x 855 mm.

Dimension Lower Crimp Curve Molding: 20 x 60 x 855 mm.

Hardness : 40 - 45 HRC

Material : S50C

Coating Surface: Hard Chrome Cr+6

Manufacturing

Machine Material Surface around the work By Milling Machine. There after Drilling the hole is for lock fastener. Hard chrome surface. Test and adjustable the molding in the work site.

Shearing Machine

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Mon, 23 Nov 2009 05:46:00 +0000

Specification Of Cutting Machine

Dimension Of Machine : Width x Length x height

: 500 x 2000 x 800 mm.

Power of Hydraulic : 10 Ton

Power Unit : 3.7 Kw. 380V 50Hz. Induction Motor

Table Of Material : 1220 mm.

Control Panel : Manual Control

Maximum Thickness For cutting : 2.0 mm.

Stroke Hydraulic : 300 mm.

Slitter Machine

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Mon, 23 Nov 2009 05:39:00 +0000

Specification Of Slitter Machine

Dimension Of Machine : Width x Length x height

: 1547 x 2215 x 1000 mm.

Cutter Blade : 3 Set

Power Unit : 1.5 Kw. 380V 50Hz. Ratio: 1:50

Speed of Machine : 22 m./min

Control Panel : Manual Control

Capacity of Product : 4,000 Sq m./Day

Material Of Cutting Blade : SKD11 or DC53 Hardness 60 HRC.

Purlin

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Mon, 23 Nov 2009 05:24:00 +0000

SPECIFICATION OF PURLIN

( ZEE - PURLIN)

Dimension Of Machine : Width x Length x height

: 795 x 6000 x 800 mm.

Station in work : 20 Station

Power Unit : 15 Kw 380V 50Hz. Ratio 1:50

Speed of Machine: 0 - 10 m./min

Control Panel : PLC Mitsubishi and Touch Screen

Capacity of Product:   Max: 4800 m./Day

Material For Roller :   SCM41 Hardness Surface and HardCrome

Max: Material Thickness :   3.2 mm.

Clip Lock 700

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Mon, 23 Nov 2009 04:46:00 +0000

SPECIFICATION OF MACHINE BOLT LESS

(Cliplock 700, 650BL, 750BL)

Step Forming 22 Step

Power Supply 380 Volt 50Hz.

Motor Drive 15 Hp Ratio 1:30

Control Panel

PLC CONTROL Model: Mitsubishi or Panasonic ro Ect.

Roller Material

S45 C or SCM41
Hard Crome Surface Thickness 0.05 mm.

Shaft Drive

S45C of material or SCM41

Speed of Machine

Maximum Speed 15 m./min

Cutting Blade

Material DC53 or SKD11
Hardness 60 HRC

Capacity Of Machine

3000 m2/day

Technical Data For Machine Bolt Type

noreply@blogger.com (เครื่องรีดหลังคาเมทัลชีต) — Wed, 18 Nov 2009 15:53:00 +0000

Roll Forming Machine
(Bolt Type)

Specification

Step Forming 18 Step

Power Supply 380 Volt 50Hz.

Motor Drive 10 Hp Ratio 1:25

Control Panel

PLC CONTROL Model: Mitsubishi or Panasonic ro Ect.

Roller Material

S45 C or SCM41

Hard Crome Surface Thickness 0.05 mm.

Shaft Drive

S45C of material or SCM41

Speed of Machine

Maximum Speed 22 m./min

Cutting Blade

Material DC53 or SKD11

Hardness 60 HRC

Capacity Of Machine

5000 m2/day