Infotech

Messi VS Ronaldo

2023-01-24T15:15:00.001+07:00

GOAT

2023-01-24T14:55:00.003+07:00

Only 1 man can stop Arsenal from winning the Premier League

2023-01-23T12:32:00.001+07:00

Ronaldo's debut in Saudi league

2023-01-23T12:25:00.006+07:00

PANTERA

2023-01-23T09:11:00.007+07:00

Pantera will be Pantera

PANTERA

My idol since i was 14 Memulai debutnya pada tahun 1986

GALAU

2015-08-23T16:27:00.001+07:00

Ternyata galau itu tidak seperti apa yang kita bayangkan.galau adalah kependekan dari God Always Love And Understand...happy galau universe..:D

TENDA Wireless-N Router [W316R] WIFI Router CUMA 99.000

2014-11-28T17:02:00.001+07:00

KLIK GAMBAR DIBAWAH UNTUK LANGSUNG BELI DARI BHINEKA

SPESIFIKASI :

Data Rates

150Mbps

Standards Protocol

IEEE 802.11a, 802.11b, 802.11g, 802.11n

Antarmuka / Interface

1 x WAN Ports 10/100 Fast Ethernet (RJ-45)
4 x LAN Switch Ports 10/100 Fast Ethernet (RJ-45)

Operating Frequency

2.4 GHz

Antena

5 dBi

Encryption

WEP, Wi-Fi Protected Access® (WPA-PSK, WPA2-PSK), Wireless MAC Filtering

Dimensi

(102.2 x 31 x 159.6 mm) WHD

Lain-lain
N Speed : Delivers up to 150Mbps wireless speed, 4X faster than ordinary wireless G devices
Share Internet Wirelessly : Allows Internet broadband sharing and the freedom of wireless Internet usage throughout your home/office
Enhanced Wireless Range : Deliver better wireless performance and faster file transfers based on 802.11n technology
Backward-Compatible : Backward-compatible with 802.11b/g devices , you can upgrade your network to the latest n at lower cost
Secured connection : Advanced WPA/WPA2 protects data and privacy. WPS enables you to quickly establish a secure network, eliminating complex encryption codes
Easy setup : World's most intuitive utility interface guides you to install a secured network in 3 steps
Intelligent QoS : Prioritizes both wired and wireless Internet traffic to bandwidth-sensitive applications like online gaming, VoIP or stream multimedia

MIcro sd card kelas 10 32gb termurah

2014-11-28T16:55:00.003+07:00

Klik gambar dibawah untuk beli dari Bhineka..!

Bersama dengan adaptor Tim Group, MicroSDHC Kelas 10 kartu memori yang kompatibel dengan semua perangkat digital yang tersedia di pasar ditandai dengan SDHC & dukungan MiniSDHC. Perangkat seperti ponsel, kamera digital (DSC), MP3 player, perangkat game dan personal digital assistant (PDA). Melalui Kelas microSDHC 10, pengguna dapat sepenuhnya menikmati hidup multimedia berkualitas tinggi dengan kinerja penyimpanan yang tinggi.

Harga Dan Spesifikasi Motorola Moto E

2014-11-17T14:54:00.002+07:00

Harga Motorola Moto E

Harga Baru :Rp 1.299.000
Harga Bekas : -

Spesifikasi Motorola Moto E

Dimensi: 124.8 x 64.8 x 12.3 mm
Sim Card : Dual SIM
Layar : Capacitive touchscreen, 540 x 960 pixels, 4.3 inches (~256 ppi pixel density)+Corning® Gorilla® Glass 3
Memory Internal : 4 GB ROM, microSD, up to 32 GB
Internet : HSDPA 21 Mbps, HSUPA 5.76 Mbps
Konektivitas : WIFI 802.11b/g/n, Bluetooth, MicroUSB,
Ram : 1 GB RAM
OS : Android OS, v4.4.2 (KitKat)
CPU : Qualcoom Snapdragon 200, Dual-core 1.2 GHz
GPU : Adreno 302
Kamera Belakang : 5 MP, 2592 х 1944 pixels
Baterai : lithium-ion, 1980mAh

Harga Dan Spesifikasi Asus Zenfone 4s

2014-11-17T14:29:00.001+07:00

Belum lama meluncurkan Zenfone 4, rupanya Asus telah memeprsiapkan gadget baru untuk konsumen, beberapa hari lalu pabrikan perangkat elektronik asal Taiwan ini merilis Zenfone 4s di Indonesia.

Asus Zenfone 4s hadir dengan spesifikasi yang ditingkatkan dibanding pendahulunya, peningkatan terlihat jelas pada layar yang kini ukruannya menjadi 4.5″ dengan resolusi sedikit lebih tinggi FWVGA jenis IPS LCD dilindungi oleh Gorilla Glass 3. Harga Asus Zenfone 4s dan Spesifikasi kaskus berniaga tokobagus olx lazada, Harga Tablet Asus Zenfone 4s quad core, Harga Asus Zenfone 4s dan Spesifikasi android, Harga Asus Zenfone 4s dan Spesifikasi paling murah, Harga Asus Zenfone 4s dan Spesifikasi terbaik, Harga Asus Zenfone 4s dan Spesifikasi berkualitas, Harga Asus Zenfone 4s dan Spesifikasi di malang Surabaya Jakarta bandung, Harga Asus Zenfone 4s dan Spesifikasi dan gambarnya, Harga Asus Zenfone 4s dan Spesifikasi review spesifikasi lengkap, Harga Asus Zenfone 4s dan Spesifikasi 8 core tercanggih, Harga Asus Zenfone 4s Spesifikasi Kamera 8MP, OS Android KitKat Asus Zenfone 4s ditenagai oleh prosesor dual core 1.2 GHz dan RAM 1GB untuk diperoleh performa yang maksimal saat menjalankan tugas berat seperti bermain games atau menjalankan aplikasi bersamaan (multitasking). Ponsel ini memiliki dua buah kamera resolusi 8MP lengkap dengan autofokus dan lampu flash LED ditambah kamera depan VGA, untuk perekam videonya Asus Zenfone 4s sudah bisa merekam video dengan kualitas Full HD.
Smartphone yang berjalan dengan OS Android 4.4.2 KitKat ini juga menyediakan slot dual SIM GSM, konektifitas cukup lengkap meliputi 3G, HSDPA, WiFi, Bluetooth serta tampilan antarmuka Zen UI yang interaktif. Harga Asus Zenfone 4s dan Spesifikasi lengkap: Jaringan: Dual SIM GSM-GSM Dual ON/dual standby (mini SIM) Ukuran / Berat: 136.8 x 67.9 x 11.3 mm / 134 gram Layar: IPS LCD 4.5″ resolusi 480 x 854 pixels (218 ppi) Kamera: 8 MP autofokus, LED Flash, kamera depan 0.3 MP, video 1080p@30fps OS: Android v4.4.2 KitKat Prosesor: Intel Atom Z2520, dual core 1.2 GHz, GPU PowerVR SGX544MP2 Memori: 8 GB, slot microSD sampai 64 GB, 1 GB RAM Internet & Data: GPRS, EDGE, 3G, 3.5G/HSDPA, HSPA+, WiFi, WiFi Hotspot (Thetering), Bluetooth, microUSB, infrared No, TV Analog No Fitur Lain: FM Radio, GPS, A-GPS, Google Play, Googla Maps, BBM Ready, Google Search, video/voice record, document viewer/editor, music/vide player Baterai: Li-Ion 1750 mAh Pilihan Warna: Black, White, Red, Blue, Yellow Harga Baru: Harga Bekas: Harga update hari ini: Cek Disini Kelebihan dan Kekurangan Asus Zenfone 4s - Plus: Layar lebih besar + Gorilla Glass 3, Kamera 8MP + VGA, OS Android KitKat, Harga terjangkau – Minus: N/A CATATAN: Info Harga Asus Zenfone 4s dan Spesifikasi diatas bisa saja berubah setiap waktu tanpa pemberitahuan, untuk itu jika ada pencantuman harga yang sudah tidak akurat dimohon untuk koreksinya lewat kolom komentar di bawah. Itulah Harga Asus Zenfone 4s dan Spesifikasi yang dapat kami sampaikan pada kesempatan kali ini, - See more at: http://www.majalahgadget.net/harga-asus-zenfone-4s/#sthash.Z2id2IxV.dpuf

SAMSUNG Galaxy Note 3

2014-11-12T01:28:00.000+07:00

Smartphone keluaran Samsung ini merupakan produk inovatif yang menggabungkan konsep smartphone dengan tablet yang dikenal juga dengan sebutan phablet. Samsung Galaxy Note 3 dilengkapi dengan S Pen yang memberikan pengalaman yang intuitif untuk menulis, menggambar dan mengerjakan berbagai hal di smartphone anda. Selain itu, Galaxy Note 3 memiliki desain yang sangat premium serta di lengkapi dengan fitur- fitur canggih seperti, touch-free voice control, sistem pencarian file yang terpadu, New easy clip, transfer file yang mudah, multi window dan lain-lain. Smartphone ini dilengkapi dengan kamera belakang sebesar 13 MP dengan Smart Stabilization dan LED Flash untuk menangkap momen penting di tempat gelap sekalipun. Dengan Android 4.3, prosesor Quad Core dan RAM 3GB anda dapat melakukan segala sesuatu dengan cepat dan mudah.

Desain yang Premium

Samsung Galaxy Note 3 hadir dengan desain yang elegan dan slim. Cover belakang Samsung galaxy Note 3 terbuat dari kulit sintetis premium yang nyaman saat digenggam dan tidak terasa licin. Selain itu terdapat pula akses jahitan klasik, sehingga semakin menambah kesan tampilan yang ekslusif dan premium.

Layar Super AMOLED berukuran 5.7 inch

Galaxy Note 3 memiliki resolusi layar sebesar 1080 x 1920 pixels Dengan kerapatan pixels mencapai 386 ppi. Dengan resolusi tersebut Anda akan mendapatkan tampilan Full HD yang jernih dan tajam pada layar super AMOLED berukuran 5.7 inch nya. Aktifitas menonton video, bermain game dan membaca konten saat browsing menjadi menyenangkan menggunakan Samsung Galaxy Note 3.

Performa Maksimal Dengan Quad Core dan RAM Besar

Galaxy Note 3 dilengkapi dengan prosesor Octa core (Quad Core 1.9 GHz & Quad core 1.3 GHz yang akan memberikan performa yang cepat dan responsif untuk menjalankan aplikasi apapun di smartphone anda. Prosesor tersebut di dukung oleh RAM 3 GB yang akan memberikan keleluasaan untuk menjalankan berbagai apps secara bersamaan (multitasking) dengan mulus dan tanpa ada hambatan. Performa yang menakjubkan ini juga diimbangi dengan kapasitas baterai yang cukup besar yaitu 3200 mAH agar dapat menemani anda menjalankan aktivitas sepanjang hari.

Produktif dengan Multi Window dan My Magazine

Dengan Multi Window, anda dapat membuka dua aplikasi yang berbeda secara bersamaan untuk mengerjakan dua hal penting sekaligus pada 1 layar Samsung galaxy Note 3. Disamping itu, Anda pun dapat dengan mudahnya drag & drop gambar atau kata-kata yang diambil dari jendela satu ke jendela yang lain atau jendela ke dua menggunakan mode drag and drop. Dengan menggunakan multi window ini, Anda bisa melakukan multitasking yang efektif dan meningkatkan produktivitas anda. My Magazine dapat menyajikan konten-konten sosial media dan berita sesuai keinginan anda dengan antarmuka pengguna seperti membaca majalah.

Kemudahan Berinteraksi Dengan S Pen

Anda dapat berinteraksi dengan smartphone anda dengan cara intuitif melalui S Pen. Input handwriting memungkinkan anda untuk menulis email, mengambil catatan, bahkan menggambar dan membagikannya ke orang-orang terdekat. Anda pun cukup meng klik tombol pen untuk langsung bisa mengakses fitur Air Command yang menawarkan 5 fitur yang berguna dari S Pen, yaitu Action Memo, S Finder, Pen Window, Screen Write dan scrapbook. Nikmati performa yang optimal dalam menjalani rutinitas Anda Setiap hari.

Kamera 13 MP + LED flash dan 2MP dengan fitur Autofocus

Kamera 13 Megapiksel yang terdapat dalam Samsung Galaxy Note 3 akan memberikan ketajaman gambar yang sempurna. Galaxy Camera juga dilengkapi dengan fitur-fitur menarik seperti Drama Shot untuk mengambil gambar yang lebih dramatis serta Touch Eraser untuk menghapus gangguan yang tidak diinginkan.

Rockkkkkzx

2014-10-25T05:53:00.001+07:00

http://m.youtube.com/watch?v=DhKHAopx7D0
From the album ...And Out Come The Wolves, released in 1995. The song peaked at #8 on Billboards Modern Rock Tracks chart.

HIMAX Polymer Android 4.4 octa core cuma 2 jutaan

2014-09-23T15:37:00.002+07:00

Sebagai salah satu pemain lokal, nampaknya Himax dipaksa untuk terus melakukan inovasi produk-produk terbaru demi mendapatkan tempat di hati konsumen. Tak mau kalah dengan vendor Cina, Xiaomi yang lebih dulu memperkenalkan smartphone berspesifikasi tinggi, Himax juga turut hadir dengan memperkenalkan ponsel android tangguhnya setelah mereka sukses menghadirkan Himax Pure 3 dan Himax Polymer Li. Kini giliran Himax Polymer Octa Core yang menjadi generasi penerusnya.

Dari namanya saja terlihat bahwa smartphone ini bakal digondol oleh prosesor berinti delapan atau Octa Core. Sebelumnya Himax Pure 3 juga hadir dengan CPU Quad Core. Spesifikasi canggih yang ditawarkan oleh Himax Polymer Octa Core ini yang begitu menggoda, dengan harga yang ditawarkan hanya dibawah 2 juta tentu saja ini bakal menjadi nilai lebih bagi konsumen tanah air. Didukung pula oleh OS Android terbaru versi KitKat sebagai platform pendukung aplikasinya. Seperti apa spesifikasi selengkapnya. Berikut ulasan review selengkapnya :

Himax Polymer Octa Core hadir dengan layar berdiagonal 5 inci dengan resolusi HD 1280 x 720 pixels serta sudah menggunakan teknologi layar IPS (In Plane Switching). Pelindung layar atau screen protectornya juga sudah mendukung Corning Gorilla Glass 2. Tentu saja dalam hal kinerja layar smartphone ini sudah tidak diragukan lagi. Dengan kualitas layar yang tajam dan luas serta didukung oleh pelindung layar yang tangguh dari Gorilla Glass 2.

Smartphone yang memiliki ketebalan lumayan tipis 9.3 mm dengan berat 151 gram ini juga sudah didukung oleh prosesor True Octa Core berkecepatan 1,7 GHz dengan chipset besutan Mediatek MT6592. Didukung pula oleh memori RAM kapasitas 2GB serta pengolahan grafis, GPU dari Mali-450MP untuk memberikan kinerja yang lebih powerful.

Spesifikasi tenaga pacu ini memang sama dengan smartphone besutan Xiaomi pada Xiaomi Redmi Note, yaitu 2GB RAM dengan prosesor Octa Core. Hampir mendekati spsifikasi smartphone premium tangguh yang dibanderol dengan harga sangat mahal, Samsung Galaxy S4. Performa smartphone Himax Polymer Octa Core ini juga dinilai lebih baik ketimbang ponsel unggulan HTC yakni HTC One.

Untuk sektor kameranya, smartphone Himax Polymer Octa Core ini juga dilengkapi oleh dua buah kamera depan-belakang. Yakni sebuah kamera pendukung di depan bersensor 5 megapixel untuk foto selfie dan video call yang sangat mumpuni serta sebuah kamera di belakang sebagai kamera utama yakni sebuah lensa kamera besutan SONY IMX135 EXMOR RS beresolusi 13 MP dengan fitur LED Flash serta auto focus.

Untuk menyimpan foto serta file data lainnya, smartphone ini didukung oleh media penyimpanan yaitu memori internal 8GB dan masih bisa diperluas oleh dukungan memori eksternal, slot microSD yang bisa menampung data hingga kapasitas 32 GB.

Konektifitas data, didukung fitur Dual SIM card yang mendukung jaringan 3G HSDPA dengan fitur-fitur tambahan lain seperti diantaranya fitur Wifi, perangkat Bluetooth, GPS serta microUSB. Untuk mendukung performa smartphone ini, Himax Polymer Octa Core ini juga ditopang oleh baterai tipe Li-ion berdaya 2500 mAh.

Harga Himax Polymer Octa Core

Himax Polymer Octa Core ini dibanderol dengan harga 2 juta saja.

mCent Aplikasi android dapet pulsa gratis

2014-08-19T05:55:00.002+07:00

Saya baru menemukan sebuah aplikasi bernama mCent yang memberikan pulsa ponsel gratis untuk Anda jika Anda mencoba aplikasi di ponsel Anda. Kita masing-masing mendapatkan bonus Rp5.000 jika Anda bergabung di mCent melalui tautan ini dan melengkapi sebuah penawaran! DOWNLOAD mCent

[How-To] Android Wear: Enable Debugging, Take Screenshots, Unlock The Bootloader, And Root The LG G Watch

2014-08-19T01:33:00.001+07:00

You saw Android Wear a couple of months ago when Google unveiled the SDK and both LG and Motorola presented the first promotional pictures. Then you watched the Google I/O keynote that officially launched the LG G Watch and Samsung's surprise addition of the Gear Live. And now you've got a shiny, brand new Android Wear watch before you... but all you can think about is ripping into the digital guts of that thing and doing all of the awful things that Google never intended. Admit it, you're one of us.

Android Police is here with a guide to fill all of your hacking and modding needs. Since Android Wear is so new, some of these methods may not be of much use at first, but the community will surely rise to the challenge before you know it. Let's get started!

These instructions assume that you are moderately familiar with using adb and fastboot. If you're using Windows, you will also need to have the USB drivers from the Android SDK installed and working properly. While it seems the KitKat SDK is sufficient for these steps, it's still best to get the most up-to-date versions of all of these tools before starting. Using outdated tools may result in unpredictable behavior.

Turn on (ADB) Debugging over USB and Bluetooth

Most of the things you'll want to do with Android Wear are going to require enabling debug mode. Since this is a necessity for most developers, the necessary steps have already been documented on the Android developer portal. The instructions in this guide are mostly identical to those provided, but with a few additional details and screenshots.

Open Settings.
1. Tap on Wear's watch face. This will take you to the voice prompt. Be sure to hit the watch face instead of a notification card.
2. Wear will wait up to 3 seconds for you to say something, then it'll change to a scrollable list of native actions. You can speed this up by swiping up or tapping on the voice prompt.
3. Scroll down and select Settings.
Open About.
Find Build number and tap on it 7 times. You're done when a toast popup appears with the message, "You are now a developer!"
Swipe right (to go back) to the Settings menu.
Open Developer options.
Find and set ADB debugging to Enabled.
You'll be asked if you're sure you want to enable. Tap the checkmark button to confirm.
[Optional] If you want to also turn on debugging over Bluetooth, Find and set Debug over Bluetooth to Enabled.

Note: As long as debugging is enabled, attaching Android Wear to any computer with ADB installed will open a prompt like this on the phone your Wear device is paired with. If the computer belongs to you, it's probably safe to check the box and tap Ok so you won't have to authorize it each time. If you ever see this dialog when you aren't expecting it, you should probably play it safe and pressCancel.

Debugging Over Bluetooth

For most of the objectives in this guide, you will have to use adb and fastboot over a wired USB connection. However, if you're taking screenshots or developing an app, it might be more convenient to use adb over a wireless Bluetooth connection. This can be done by forwarding a socket through adb. That sounds more complicated than it really is.

On your Android Wear device:
1. Enable Debug over Bluetooth (described in the previous section).
On the phone your Android Wear device is paired with:
1. Attach the phone to your computer with a USB cable.
2. Open the Android Wear companion app.
3. Open the Settings screen (it may be an icon represented by a pair of gears, or it may be in the overflow menu).
4. Enable on Debugging over Bluetooth.
  Note: Don't worry if the companion app indicates the target device is not connected, the status doesn't always refresh correctly.
On your computer:
1. Open a terminal window and enter this command:

adb forward tcp:4444 localabstract:/adb-hub; adb connect localhost:4444

The first part of that line will map a socket through the phone that is paired to your Wear device, while the second part makes a connection. At this point, we've got two devices attached to your computer. You can see a list of attached devices with:

adb devices

The identifiers are listed on the left side, and their connection status on the right side. Since there are two devices visible to adb, it cannot automatically pick a default device. All of your commands will have to be sent using the -s flag along with a device identifier. We already declared the Android Wear watch would be on port 4444, so it's identifier appears as localhost:4444. For example, if we want to open a shell, the command will look something like this:

adb -s localhost:4444 shell

Taking Screenshots

Sometimes you want to snap a shot of what your device is showing you at a given moment. Unfortunately, the current run of Android Wear devices lack a convenient method for taking a screenshot. Until a better solution can be worked out, already on it, we have to rely on adb to fill the gap. Taking screenshots with adb requires debugging to be turned on and a connection to a computer through Bluetooth or USB.

From a terminal, enter the command:

adb shell screencap -p /sdcard/DCIM/screenshots/screenshot1.png

Reminder: change the file name for each screenshot.

The path can be set to any location you prefer, but the filename should be changed for each screenshot. If a filename already exists, it will be overwritten without warning. Also, if more than one device is attached, you'll have to use the -s flag to tell adb which device should be taking the screenshot.

Once you're done collecting screens, use adb pull to copy them over to your computer.

adb pull /sdcard/DCIM/screenshots/screenshot1.png

-or, to copy all of them at once-

adb pull /sdcard/DCIM/screenshots/

Modding 101

Welp, it's time to talk about voiding your warranty. If that's not your cup of tea, this is probably a good place to stop. It's possible to do some real damage with most of the things you would do from this point forward. You've been warned.

Disclaimer: Android Police isn't responsible for any harm to your device - proceed at your own risk.

Bootloader / Fastboot

If modding your Android Wear wristwatch is more your speed, it's time to start poking around the device internals. The first step is to get into the bootloader, also known as fastboot mode. The lack of physical buttons necessitates a few different methods for accessing the bootloader than we're familiar with on most handsets and tablets, but it's not that much different.

Method 1 - Swipe

This is probably the fastest and easiest way to reach fastboot mode. All you have to do is start (or restart) the watch and look for the OEM logo during boot up. While the logo is showing, and before the screen dims, swipe your finger from the top-left corner across to the bottom-right corner. If you're using a Samsung Gear Live, you'll also have to hold down the power button on the front. If executed correctly, you should be looking at your bootloader.

(Working on the video now)

Method 2 - Command Line

In some instances, it might be more convenient to use the command line if you happen to be at your computer and already have a terminal window open and ready to go. As long as debug mode is enabled and the watch is connected, just enter:

adb reboot bootloader

Both devices provide touch-enabled bootloaders. The LG G Watch places three on-screen buttons across the bottom. There are left and right arrows on either side to cycle through different actions (shown in red near the top of the screen). The commands are: Start, Power Off, Recovery Mode, and Restart Bootloader. Tap the arrows until the correct command is shown, then tap the circle in the center to perform the action. The Samsung Gear Live offers the same options, but you have to swipe downward to change your selection, and swipe to the right to activate it.

Left: Samsung Gear Live bootloader, Center: LG G Watch bootloader, Right: prompt to unlock

Recovery

For your primary flashing needs, recovery mode is usually the way to go. There aren't any direct button or gesture combinations to enter recovery mode, but getting there is still quick enough.

Method 1 - Fastboot Menu

This one is pretty obvious. Simply get into the bootloader through whatever means suit you, then use the menu to access Recovery Mode.

Method 2 - Command Line

You already know the bootloader is easy to reach with a simple command, and there's also one for Recovery Mode.

adb reboot recovery

Download Mode

If you find yourself in a bind, there's a chance that you'll be able to fix things in Download Mode. This is more of an interactive flashing tool that relies on a live connection to a computer. At this point in time, there aren't any good reasons to enter this mode, but it is worth mentioning. The steps to enter and leave download mode are a bit different depending on the device.

G Watch

The watch must be fully powered off, and then connected to the computer through the charging cradle. When the LG logo appears during boot up, swipe your finger from the bottom-left corner across to the top-right corner.

If you haven't done anything in download mode, or if the flashing tool doesn't automatically restart the device, it's possible to exit by simply breaking the connection with the computer. WARNING:Disconnecting the watch while flashing firmware will almost certainly brick it. Don't do this if there's any risk of writing data.

Gear Live

Restart the watch (it doesn't need to be powered off) and wait for the Samsung logo during boot up. With the logo on the screen, hold down the power button and swipe your finger from the top-right corner across to the bottom-left corner. Once in this screen, navigate downward by pressing the power button, and activate an option by long-pressing.

If you need to leave download mode, and the flashing software didn't automatically restart, navigate the menu to either "Start" or "Power Off."

Unlocking The Bootloader

Unlocking the bootloader will wipe user data from the device. Your installed apps should be restored after your phone is re-paired, but the data for some apps may not be. This includes collected data from your step counter, device pairings, and debug authorizations.

While it's possible to use adb over Bluetooth to reboot into the bootloader, you'll lose the connection once you're in there. The only way forward is with a wired USB connection to your Android Wear device.

The LG G Watch and Samsung Gear Live are shipping with locked bootloaders, but they are easily unlocked using a standard fastboot command, just like a Nexus device. In fact, if you've ever unlocked a Nexus phone or tablet, the process is basically the same.

To unlock your device, reboot it into bootloader mode and run this command from a terminal:

fastboot oem unlock

Warning: Samsung does not prompt for confirmation!!! It immediately unlocks the device and wipes your data. Come on, Samsung, get it together...

The LG G Watch will present you with the standard prompt advising you that this action may void your warranty and that your data will be wiped. The only thing of significance you're likely to lose is your pedometer info. Just about everything else should be stored by the apps on your phone. Once your watch is paired with your phone again, almost everything will be restored automatically.

To move ahead with the unlock, tap either arrow to change the option to "Yes - Unlock (may void warranty)," then tap the circle. The unlock will only take a moment to erase user data, and then you're done.

Left: LG bootloader unlocked, Right: LG boot screen with unlock icon

Oh, and before we assume Samsung is the only one that did a rush job with its bootloader, take a closer look at LG's unlock screen. Not only does it falsely claim that it will delete personal information on your phone, but it wants to inform the user that unlocking will allow for the installation of a "custome operting system" and that may void your "warrenty". Way to go, LG.

Rooting

Alright, you've unlocked your bootloader and you're ready to tear it up with custom roms and other assorted mods. But wait, this is probably a good time to stop. No, I'm not messing with you. Justin Case and I only just acquired root on the G Watch on July 4th, and there's very little that can be done with it at this point. Additionally, there are no superuser managers (eg. Chainfire's SuperSU or Koush's Superuser) available to prevent an app from abusing root for malicious purposes. This situation will surely change over a matter of days, or even hours, but that's where we're at for the moment. I'm not suggesting that people avoid rooting, only that they wait until it can be done a little more safely.

If you're one of the people that wants to get started on building some root apps, or you just need to be on the bleeding edge, you're in the right place. So far, we only have the process worked out for the LG G Watch, but the Samsung Gear Live should be ready fairly soon.

LG G Watch

The process is very straight forward, but it requires that you already have your bootloader unlocked. If you haven't already done so, go back and complete that step first.

First, download our modified boot image (thanks to Justin Case):

File name: LGGW-rootboot.img

MD5: fe2e8e3bb008096100da3e2014c597f1

Now, reboot into the bootloader:

adb reboot-bootloader

And boot the G Watch using the modified boot image. Warning: Do not flash the boot image, just boot from it!

fastboot boot LGGW-rootboot.img

The watch will play the boot animation for about 2 seconds, then automatically reboot. The modified boot image is only meant to run once so that it can install the necessary superuser binaries. After the watch automatically reboots, it will be running on the stock boot image. There will be no outwardly obvious signs the G Watch has been rooted, but you can check it by opening a shell through adb and running su.

adb shell

su

If your prompt turns from shell@dory to root@dory, then you've got root on your G Watch. Congratulations!

Samsung Gear Live

Still waiting on a stock root method.

Custom Recovery

Rooting your smartwatch is certainly a good way to get a handle on its operation, but there are times when the stock software just isn't good enough. At this point, you'll want to switch over to running a custom ROM. For that, you really want to use a custom recovery to do all of your flashing.

The process for installing a custom recovery on the G Watch is exactly like it would be for any other unlocked device. If you haven't already unlocked your bootloader, go back and complete that step. There's no need to root your device to install a custom recovery.

First, download the recovery image appropriate for your device:

LG G Watch: Team Win (TWRP)
Samsung Gear Live: Team Win (TWRP)

Then, while your device is connected to a computer, get to your bootloader screen through whatever means you would like to use and enter this command to flash the recovery image.

fastboot flash recovery

The bootloader will briefly display the words "Downloading..." and then "Writing..." Once it is finished, tap the arrows until you see the option to reboot into Recovery Mode, and tap the circle button. That's all it takes!

Wrap-up

Since a lot will be changing with Android Wear over the next few days and weeks, I'll try to keep this post updated as new information comes in.

Changelog

2014-07-05: Initial Version
2014-07-25: Added details for TWRP custom recovery on G Watch. Also broken out a separate section to describe accessing fastboot, recovery, and download mode.

Shuttle+ Music Player v1.4.2 Download

2014-08-15T16:11:00.003+07:00

Shuttle+ Music Player Apk - is one of the most intuitive, lightweight and powerful music player for Android users.

Shuttle Music Player contains everything you need in a music player. It is the music player of choice for your Android device.
Key Features:-

Built in 6 band equalizer with bass boost
Gapless playback
Supports Embedded and Online Lyrics
Automatic artwork downloading
The best user interface of any music player in the Play Store
Tons of theme options, including light and dark mode
Tag editing
Sleep Timer
Widgets
Folder browsing

What’s New in v1.4.2 Apk

Reinstated Gmail styles placeholders
Fixed issue where wrong artwork was displayed
Fixed issue where default page was not respected
Fixed some force close errors

Shuttle+ Music Player v1.4.2 Apk
Download Now

Android L

2014-07-19T19:49:00.002+07:00

Android L is an upcoming release of the Android mobile operating system developed by Google. Unveiled on June 25, 2014, and released in a beta the next day for selected Google Nexus devices, it is expected to be released in late 2014.

The most prominent changes to L include a redesigned user interface built around a responsive design language referred to as "Material Design", and improvements to the notification system which allow them to be accessed from the lock screen, and displayed within other apps as banners across the top of the screen. Internal changes were also made to the platform, with the Android Runtime officially replacing Dalvik for improved application performance, and changes intended to improve and optimize battery usage.

Android L was first unveiled on June 25, 2014 during a keynote presentation at the Google I/O developers' conference. Alongside L, the presentation focused on a number of new Android-oriented platforms and technologies, including Android TV, in-car platform Android Auto, wearable computing platform Android Wear, and health tracking platformGoogle Fit.^[2] It does not yet have a formal version number or codename.^[3]

Part of the presentation was dedicated to a new cross-platform design language referred to as "Material Design". Expanding upon the "card" motifs first seen in Google Now, it is a cleaner design with increased use of grid-based layouts, responsive animations and transitions, padding, and depth effects such as lighting and shadows. Designer Matías Duarte explained that "unlike real paper, our digital material can expand and reform intelligently. Material has physical surfaces and edges. Seams and shadows provide meaning about what you can touch." The material design language will not only be used on Android, but across Google's suite of web software as well, providing a consistent experience between applications and platforms.

Hitman GO APK 1.6.19024 Full Download

2014-06-15T02:45:00.001+07:00

Get your daily fix of Agent 47 with this elegant, strategy-based Hitman game!

Hitman GO is a turn-based puzzle game with beautifully rendered diorama-style set pieces. You will strategically navigate fixed spaces on a grid to avoid enemies and take out your target or infiltrate well-guarded locations. You really have to think about each move and all the Hitman tools of the trade you would expect are included; disguises, distractions, sniper rifles and even 47’s iconic Silverballers.

With Hitman GO, you’ll experience:

• Challenging puzzles that put your assassination skills to the test
• Beautiful scale model-style visuals

• Environments with secret passageways and off-limit areas
• Agent 47’s tools of the trade: Distractions, disguises, hiding spots, sniper rifles and even the iconic Silverballers
• Different enemy types with unique and deadly behaviours
• Different ways of completing each level, silently or forcefully

Screenshots:

Direct Download:
Hitman GO APK + Data

Updated: June 4, 2014

QR CODE
Size: 192M
Current Version: 1.6.19024
Requires Android: 2.3.3 and up
Source: Google Play

Share Your PC’s Internet with an Android Phone over USB

2014-06-06T11:04:00.002+07:00

Most of us are very familiar with USB or WiFi tethering , as a method of sharing the Internet connection from an android phone with other devices . But fairly a very few of us are familiar with the opposite process , Reverse tethering .

Reverse tethering is possible . Using reverse tethering you can share your Computer’s internet connection with your Android phone through an USB data cable . which is in fact a very useful feature in case you don’t have WiFi router to share your PC’s internet connection . Continue reading to find out how you can use reverse tethering to share your Computer’s internet connection with your android phone .

What do you need ?

In order to be able to perform reverse tethering you will need a Rooted android phone , which is a also a major reason why reverse tethering is not much popular among android new users. If you have a rooted android phone , you can proceed further with this guide and download the following prerequisites required further in this guide .

Drivers for your Android phone
Android Reverse Tethering tool

Android Reverse Tethering tool is an free windows utility which makes use of ADB ( Android debug bridge ) to share your Computer’s internet connection with your android phone over an USB data cable . You can download it from this link , or visit the link provided above for the latest version of the utility .

How to share your PC’s internet connection with your Android phone over USB

Step 1: Connect your Android phone with your PC using an USB data cable and ensure that USB debugging is enabled on your phone . ( Settings > Applications > Development > USB Debugging > Turn On )

Step 2: Extract the downloaded zip file and run the AndroidTool.exe file .

Step 3: From the Android reverse tethering utility , select your phone from the “ Select a device “ drop down box and then from the “ Select DNS to use “ dropdown box , select a DNS ( Choose anything apart from 192.168.1.1 ) .

Step 4: Click on the Connect button to start the reverse tethering process . The utility will then connect with your android phone and install the required apps on your phone . If the utility crashes simply run it over again .

Step 5: After the required apps have been installed on your phone , You will be prompted to grant root access to the USB tunnel app . Tap on “Grant” to provide root access to the app and you can access your Computer’s internet connection on your phone .

Thats it and now you will be able to access your Computer’s internet on your Android phone and even all your android apps would be able to access it too . You might be prompted with an No network connection error in intervals , its nothing to worry about and you can click ok to proceed further .

Via / XDA-Developers

Call Recorder Pro APK 8.9 Full Download

2014-06-05T23:22:00.002+07:00

Another Call Recorder Pro APK is a free call recorder application. It is one of the best call recorders in the Play Store and offers tons of features such as:
- Search
- Grouping recordings by date
- Auto email (Pro)
- Auto delete old recordings
- Marking recordings as important so they don’t get auto deleted
- Multi select, delete, send
- Displaying contact name and photo
- Excluded numbers
- Auto or Manual call recording
- Password protection of recordings
- Lots of recording formats
- Ability start delayed recording
- Different recording modes by number, contact, non-contact or just selected contacts
- Dropbox integration (Pro)
- Google Drive integration (Pro)
- And many more…
Do not use ACR in conjunction with other call recorders and try different recording formats (ogg,3gp,mp4,wav) to find best one for your phone
Some phones do not support call recording properly. This is due to capabilities of different chipset/CPU each brand/model have. Please see http://goo.gl/s9wDGU for known phone list.

Download :
Call Recorder Pro APK

Qwerty

2014-05-30T02:06:00.001+07:00

Keyboard merupakan unsur penting dalam penulisan.

Comic 8

2014-05-26T12:55:00.002+07:00

Comic 8 adalah film aksi-komedi Indonesia yang dirilis pada 29 Januari 2014.

Sinopsis

Delapan anak muda masing-masing mempunyai alasan dan motif yang berbeda-beda dalam melakukan perampokan bank. Ada yang merampok karena Galau, Hobby, Iseng, Adrenaline Sport, bahkan ada yang Merampok untuk menghidupi panti asuhan dan rakyat miskin.
Kedelapan Perampok tersebut akan terbagi menjadi tiga tim dengan kemampuan dan jam terbang yang berbeda-beda. Aksi pun berkembang dari perampokan yang awalnya terlihat seperti kebetulan yang aneh, terkepung oleh pasukan polisi dengan AKP-nya yang super cantik, sampai akhirnya mereka harus saling bekerja sama dan menemukan jawaban dari teka teki yang ada serta mencari jalan keluar terbaik untuk semua.

Download or Streaming filmnya Disini nanti kalo sudah ada!!!

Pushbullet Updated To v14.1 With Enhanced Notification Mirroring That Syncs All Notifications Across Devices

2014-05-24T16:33:00.003+07:00

Remember like a year ago when Google was going to add notification syncing to Play Services so you wouldn't have to see the same notifications on your phone and tablet? That still hasn't actually been rolled out, but the new Pushbullet v14.1 does pretty much the same thing. By expanding the notification mirroring service, Pushbullet can sync notifications across all your devices.

As an example – let's say you get a phone call, but you've got a tablet in your hands. Pushbullet will automatically mirror that notification from the phone on your tablet so you know who's calling without picking up the phone. If an app produces a notification on your tablet, and you swipe it away, it is also cleared on your phone (and computer, if you have the Pushbullet extension). You can also see the content of text messages on a tablet with Pushbullet's new notification sync.

Syncing the dismissal of notifications is probably the coolest part. No more will you have to see the same things when you pick up a different device. Cool though it is, the developers are careful to point out this is a beta feature. It can be enabled in the settings of each device you want synced, but watch for bugs.

Easily Create an Updater-Script using a Windows-Based Tool

2014-05-24T16:27:00.001+07:00

To install any ROM through a custom recovery, you need to have an updater-script. It’s basically a few lines of commands that tells your Android recovery what to do. These files are also widely used with Aroma Installer and other scripting engines, but of course everyone knows this already. However, a problem arises when you need to create your ownupdater-script from scratch, as it’s not always generated during the build process.

For beginners, the updater-script language (Edify) might be like black magic. Thankfully, there are some tools that can help out with basic commands such as a GUI-based utility by XDA Forum Member Octanium91 (posted thanks to courtesy of XDA Forum Member borndead) called Android Script Creator that allows you to create an updater-script with just a few clicks.

Android Script Creator does all the dirty work for you. All you need to do is select which option should be added to your current updater-script. Every option is presented through a simple dropdown menu that explains all of the commands. The generated script can then be used with a ROM, application, mod, or practically anything that can be flashed through a custom recovery.

Android kitkat 4.4.3

2014-05-20T11:47:00.001+07:00

Android kitkat kitkat