Bver

Bver Brochure

2019-11-15T03:30:00.000-08:00

https://blog.bverconstruction.com/2011/04/bver-brochure.html

Vacancy - Account Executive

2013-07-09T21:19:00.000-07:00

Post : Account executive
Qualification : Accounting Diploma and above
Experience : Preferably 3 years experience
Knowledge : Preferably with SQL Accounting software knowledge.
Remarks : Basic salary and year end bonus.

Vacancy- Quantity Surveyor

2011-04-11T08:00:00.000-07:00

Requirement:

Age -21 to 45 years
Qualification - Diploma and above
Experience - 2 years experience
Transportation - own transport
Gender - Male or female are welcom

Interested candidates, please write in with full resume together with latest passport size photo.

Vacancy-Foreman

2011-04-11T07:58:00.000-07:00

Requirement:

Age -21 to 45 years
Qualification - SPR and above
Experience - 2 years on site experience
Transportation - own transport
Gender - Male or female are welcom

Interested candidates, please write in with full resume together with latest passport size photo.

Vacancy-Site supervisor

2011-04-11T07:48:00.000-07:00

Requirement:

Age -21 to 45 years
Qualification - SPM and above
Experience - 2 years on site experience
Transportation - own transport
Gender - Male or female are welcom

Interested candidates, please write in with full resume together with latest passport size photo.

Sealer Bv 64

2011-04-11T05:34:00.001-07:00

Description

A modified acrylic resim system dispersed in a mixture of solvents. Its use to seal and protect concrete

substrate from ingressing of dirt and provides an easier cleaning surface.

Area to Use

The product can be applied to most concrete surface.

Existing Concrete

Ensure that the substrate is clean and dry. Remove any efflorescence by an acid etch, high acid.

Typical Properties

Melting Point / Boiling Point N/A
Vapor Pressure N/A
Specific Gravity 0.92
Flash Point 27°C
Solubility in water Insoluble
Solid (PBW) 25%
Appearance Clear Liquid or With Colour
Flammability N/A

Application

Use as a concrete sealer,

# Pour on with cone or tube

Packing:-

SEALER BV 64 is packed in 5 litres or 18 litres pail.

Storage

Xyleen: Storage cool and dry, away from heat sources, flammable areas.

Description and uses

Sealer BV 64 is an acrylic base concrete sealer designed for finishing new interior or exterior

concrete. It is also a durable sealer and finish coat for refurbishing older coloured, chemically

stained, or uncoloured concrete flatwork. It gives the surface an attractive appearance and

enhance depth of colour while offering an easy-to-maintain, semi-gloss finish and added resistance to staining.

As a sealer and finish coating, Sealer BV 64 is helped in preventing concrete dusting and reduces

surfaces staining from materials such as automotive grease, oil and food spills. It produces a

low-maintenance, easy-to-clean film, resistant to abrasion, weather and ultraviolet (UV) radiation.

Warehouse, factory and many other interior coloured or uncoloured concrete floors should

normally be sealed to protect the concrete surface and facilities clean up.

Recommended for :-

- Concrete floor

- Textured concrete floor

- Coloured concrete floor

- Brick walls

- Slates

- Sandstone

Coverage

Sealer BV 64 must be applied full strength without thinning by roller, airless sprayer or by brush. The

coverage will very depending on the method of application and the porosity and texture of the concrete.

Two thin coats are recommended for new uncoated concrete. One coat is usually sufficient on

concrete preciously coated with Sealer BV 64. As a general rule of tumb, an 18 litre tin covers

approximately 60m2 – 70m2.

Preparation

Before application, the concrete surface must be clean of all dirt, oil and grease. Coatings and curing

membranes, other than previously applied Sealer BV 64, must be stripped. Failure to remove all

contaminants and coatings will cause appearance defects, adhesion loss, peel, and reduced durability.

All washed or wet areas should be allowed to dry thoroughly before application of Sealer BV 64.

Application

The coating must be applied thinly and uniformly. Immediately prior to use, the liquid materials should

be thoroughly mixed. Application of two coats id recommended. The second coat should be applied after

the first coat is completely dry, a minimum of 4 hours. Sealer BV 64 must be allowed to dry completely,

normally a minimum of 12 hours after application of the second coat. Finished surface should be protected

from damage by other trades.

Availability

Sealer BV 64 is obtainable from:-

B-VER CONSTRUCTION SDN BHD

Add : 12A-01-01, Lorong Batu Nilam 1B,

Bandar Bukit Tinggi, 41200 Klang,

Selangor Darul Ehsan.

Tel: 03-3324 1403

Fax: 03-3323 3548

E-mail: bverconst@yahoo.com

Coverage: 60m2 – 70m2 / 18 litre

Maintenance and removal

Sealer BV 64 surfaces should be maintained by sweeping. Spills should be cleaned up when they

occur. Dirt may be hosed off with water. On area subject to heavy use or more severe conditions,

periodic general cleaning should be performed using a high-quality commercial detergent and automatic

scrubber equipment.

A maintenance application of Sealer BV 64 should be made periodically as the coating is worn off

the surface. The need for maintenance coating will be accelerated in area of heavy use.

It is not necessary to strip the previously applied coating unless film build up is heavy of the surface

cannot be cleaned sufficiency. Solvent can be applied to remove existing Sealer BV 64.

Limitation

Sealer BV 64 must only be used in thin coats on surface adequately textured for slip resistance unless

used on surface previously coated with the sealer, they must be porous to allow penetration. If applied

improperly or too heavily, the surface may whiten, peel, or become slippers, particulars on pool decks

or other area where water may collect and stand on the surface.

Sealer BV 64 is a premium-quality sealer and finish coating, but like allcoatings, will require periodic

maintenance and reapplication. Spills should be removed promptly and floors cleaned regularly to

minimize possible staining and damage to the finish coat.

B-Ver Releaser Agent

2011-04-11T05:33:00.001-07:00

Description

B-VER RELEASER AGENT is a ready to use, dry shake releaser available in variety of colours. It is used to

release moulds for decorative imprinting from sticking to the concrete surface. B-VER Releaser Agent also

acts as curing compound and colouring agent to give a desired two tone effect.

Physical Description / Properties

Appearance Odorless coloured po
Boiling point / melting point Approximate 150 Degrees Celsius
Vapor Pressure N/A
Specific Gravity N/A
Flash Point > 250 Degrees Celsius
Flammability N/A
Solubility in Water Insoluble

Packing

B-VER RELEASER AGENT is packed in 14kg/bag. Stir well before use.

Shelf Life

Under normal conditions and kept dry, the shelf life of the releaser is 3 years from the date of manufacture.

Rate of Application

0.1 – 0.13kg/m2

Application

As soon as the application of B-VER Colour Hardener is complete and ready to print, linal trowel the surface of

the colour hardener and dry shake the B-VER Releaser Agent and applied the required tools to form the pattern surface.

Wash and Seal

One or two days after imprint, wash excess releaser off job with water or sweep dry. After 5-7 daysthe surface

should be cleaned with a high pressure cleaner. Rough surfaces shall be grind-down and touch-up if any. After

washing and the surface is completely dry, apply 2 coats Sealer BV 64. Allow the first coat to dry before

application of second coat.

Protection

The finished floor shall be protected. Any heavy traffic shall be avoided for 28 days.(The main contractor

shall take necessary steps to protect the finished floor from damage by other trades)

B-VER HARDENER BV29

2011-04-11T05:28:00.001-07:00

Description

B-VER BV29 Colour Hardener is a ready to use dry silica quartz mineral aggregate, suitable for finishing, hardening and coluring over fleshly floated and leveled concrete flatwork where the surface is required to be stamped or stenciled.

Use

B-VER BV29 Colour Hardener is suitable for both interior and exterior and where areas require additional wear resistance

such as:-

Ø Car park/entrance of Bungalows

Ø Main entrance of Hotels and Condominium

Ø Swimming Pool Deck

Ø Pavement Walks

Materials Composition

B-VER BV29 Colour Hardener consist of hard wearing silica quartz mineral of property sizes and graded aggregate, dispersing agents,strength promoter and cement binder. Whenavailable in colours, the pigments which are integrand uniformly and have good UV resistance.

Packing

B-VER BV29 Colour Hardener is packed in 40 Kg/bag.

Shelf Life

Under normal conditions and kept dry the shelf life of the surface hardener is at least 6 months from the date of manufacture.

Colours

B-VER BV 29 Colour Hardener is ready available in a wide range of colours, where customized colour is requires the colour

hardener can also be formulated to specification with sufficient prior notification and quantities.

Properties

v Compressive strength at 28days: 65n/mm.

v Abrasion resistance is 200% great than plain concrete

v Hardener of aggregate is Moh’s scale 7

Rate of Use

3 to 4kg/m2

Application

After the concrete has been screed, consolidate and further level by bull float and any free water has evaporated or

been removed, the surface should be floated by hand or bull floated. Immediately following this floating operation, shake

the B-VER Colour Hardener by and over the surface. The first application of the B-VER olour Hardener should use

about 2/3 of the total amount needed. The dry shake material will absorb some moisture from the freshly prepared

concrete and should than be thoroughly floated into the surface, preferably by a bull loat immediately after this the

remainder of the specified amount of the B-VER Colour Hardener should be distributed evenly over the surface at right

angles to the previous application. This should be thoroughly floated and take part of the surface taking care that a

uniform colours is obtained. Final toweling is best done by hand.

Protection

The finished floor shall be protected and heavy traffic shall be avoided for approximately 28 days.

The Contractor or principal shall take necessary steps to protect the finishes floor from damage by other trades.

The representation and recommendation regarding the product are based on test, which we believe are reliable.

We cannot accept responsibility or guarantee of success of your work as we have no influence or control over

the method of application, site condition etc.

Slide show

2011-04-11T03:49:00.000-07:00

Pebble wash

Imprint

Project history

Picture Galleries

2011-04-11T03:44:00.001-07:00

Pebble wash sample

Pebble wash sample picture

Terrazo Sample

2011-04-11T03:29:00.001-07:00

3D Mosaic stone

2011-04-11T03:24:00.001-07:00

Stone sample

2011-04-11T03:05:00.001-07:00

Leaf batik

2011-04-11T02:48:00.001-07:00

Imprint

2011-04-11T02:43:00.001-07:00

Civil work

2011-04-10T23:25:00.001-07:00

Pebble wash sample

2011-04-10T23:06:00.001-07:00

Pebble wash sample picture

2011-04-10T22:46:00.001-07:00

Pebble wash

2011-04-09T08:54:00.000-07:00

Project History

2009-07-19T23:46:00.000-07:00

Terrace House Putrajaya

BS Young Melaka

From Bungalow

From Kayangan Height

Bungalow From Kajang

Nation Park Bukit Tinggi Resort

National Mosque KL

Pembinaan MJC Sdn Bhd Jalan Galloway

Precinct 6&7 Putrajaya

Seksyen 7 Shah Alam

Sigmal Kuchai Lama

Taman Botanic Putrajaya

UITM Shah Alam

ACHIEVEMENTS

2009-07-19T20:00:00.000-07:00

B-VER has successfully completed all the projects undertaken to date, all to the
satisfaction of its clients. The company is fully committed towards each and every
project and this is reflected in its continuous projects/jobs being awarded to the
company.
 In addition, the company is fully committed to safety as it has been awarded several safety awards from previous projects, in recognition of its contribution to
the excellence safety records achieved.

LISTS OF OTHER RELATED PROJECTS

2009-07-18T03:55:00.000-07:00

Prior to the formation of B-VER, the CEO of B-VER has over 20 years of experience in
the construction industry. The projects that contributed to the vast experience
accumulated over this period of time includes the following:

HEALTH, SAFETY & ENVIRONMENT MANAGEMENT

2009-07-18T03:50:00.000-07:00

 Presently, the company has yet to establish its own procedures and policies towards HSE
matters. B-VER is using established and recognised HSE as defined by each respective client
requirement for implementation in each project. As a quality and people oriented company,
B-VER is committed to achieve its target of excellence towards the work produced without
sacrificing quality, and adopting safety as a way of life.

BUSINESS RELATIONSHIPS

2009-07-18T03:44:00.001-07:00

B-VER has built up strong and reliable relationships with other subcontracting
companies during the course of B-VER's progress in the construction industry.
When and wherever necessary, B-VER is capable of providing sufficient manpower,
equipment, material and other provision for each project with its own source
of resources and/or with other companies that have a good relationship's with
B-VER.

     With this arrangement at B-VER's convenience, it would prove beneficial
to the client as it would mean a reduction of contractors on site together with
more efficient interface between contractors at the work site, resulting in
lighter workloads and optimum time frame for the construction period.

      With professionalism and effective management as part of B-VER's policy
in approaching its duties, B-VER would be a strong competitor and a potential
major player in the construction sector of Malaysia's expanding local and oil
& gas industries.

ORGANISATION STRUCTURE

2009-07-18T03:41:00.000-07:00